Added a build, and updated build guide to recommend covering up

possible gnd short

doc/buildguide_v1.md

@@ -94,7 +94,13 @@ One trick from [TentacleSenpai69](https://www.reddit.com/user/TentacleSenpai69/)
 
 ### Step 4: Install the RJ45 sockets
 
-Just align them to the white outline. They should stay in place by themselves when you flip the PCB.
+Some connectors might short the casing to the outer unused pin.
+It might be a good idea to place a tiny piece of tape on top
+of the pin hole that is directly on the footprint outline of the connector you are installing, or at the housing itself where it touches this.
+
+![RJ45 possible short](images/shorted_rj45.jpeg)
+
+Just align them to the white outline. They should stay in place by themselves when you flip the PCB to solder them.
 
 ### Step 5: Install the encoder
 

readme.md

@@ -42,6 +42,9 @@ https://discuss.tchncs.de/post/852362
 https://lemmy.world/post/2080485
 ![Cheapino by Hansamann](otherbuild5.jpeg)
 
+https://lemmy.world/post/2832967
+![Cheapino by createkarma](otherbuild6.jpeg)
+
 Drawbacks:
 
 * Without a plate, its pretty difficult to solder swithes straight. I made a small helper "fork" to hold each column in place when soldering.