arne/cheapino_qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Tented skeletyl works, except layer 6...

Browse Source
This commit is contained in:
Thomas Haukland
2022-11-07 20:50:16 +01:00
parent 7e0823899a
commit 1441e32f31
10 changed files with 404 additions and 23 deletions
Download Patch File Download Diff File Expand all files Collapse all files

46
keyboards/bastardkb/skeletyl/blackpill/config.h
View File

@@ -46,13 +46,43 @@
#define CRC8_OPTIMIZE_SPEED
/* SPI config for EEPROM. */
#define SPI_DRIVER SPID1
#define SPI_SCK_PIN A5
#define SPI_SCK_PAL_MODE 5
#define SPI_MOSI_PIN A7
#define SPI_MOSI_PAL_MODE 5
#define SPI_MISO_PIN A6
#define SPI_MISO_PAL_MODE 5
//#define SPI_DRIVER SPID1
//#define SPI_SCK_PIN A5
//#define SPI_SCK_PAL_MODE 5
//#define SPI_MOSI_PIN A7
//#define SPI_MOSI_PAL_MODE 5
//#define SPI_MISO_PIN A6
//#define SPI_MISO_PAL_MODE 5
/* EEPROM config. */
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
//#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
//
#define ENABLE_RGB_MATRIX_ALPHAS_MODS
#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
#define ENABLE_RGB_MATRIX_BREATHING
#define ENABLE_RGB_MATRIX_BAND_SAT
#define ENABLE_RGB_MATRIX_BAND_VAL
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
#define ENABLE_RGB_MATRIX_CYCLE_ALL
#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
#define ENABLE_RGB_MATRIX_DUAL_BEACON
#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
#define ENABLE_RGB_MATRIX_RAINDROPS
#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
#define ENABLE_RGB_MATRIX_HUE_BREATHING
#define ENABLE_RGB_MATRIX_HUE_PENDULUM
#define ENABLE_RGB_MATRIX_HUE_WAVE
#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
#define ENABLE_RGB_MATRIX_PIXEL_FLOW
#define ENABLE_RGB_MATRIX_PIXEL_RAIN

6
keyboards/bastardkb/skeletyl/blackpill/halconf.h
View File

@@ -21,9 +21,9 @@
#define HAL_USE_PWM TRUE
#define HAL_USE_SERIAL TRUE
//#define HAL_USE_I2C TRUE
#define HAL_USE_SPI TRUE
#define SPI_USE_WAIT TRUE
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
//#define HAL_USE_SPI TRUE
//#define SPI_USE_WAIT TRUE
//#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
#define HAL_USE_GPT TRUE
#include_next <halconf.h>

11
keyboards/bastardkb/skeletyl/blackpill/info.json
View File

@@ -1,6 +1,13 @@
{
"keyboard_name": "Skeletyl Blackpill",
"manufacturer": "QMK",
"development_board": "blackpill_f401",
"url": "",
"maintainer": "qmk",
"usb": {
"device_version": "1.0.0",
"vid": "0xFEED",
"pid": "0x6465",
"device_version": "0.0.1"
},
"features": {
}
}

4
keyboards/bastardkb/skeletyl/blackpill/mcuconf.h
View File

@@ -35,8 +35,8 @@
//#undef STM32_PWM_USE_TIM3
//#define STM32_PWM_USE_TIM3 TRUE
#undef STM32_SPI_USE_SPI1
#define STM32_SPI_USE_SPI1 TRUE
//#undef STM32_SPI_USE_SPI1
//#define STM32_SPI_USE_SPI1 TRUE
//#undef STM32_SPI_SPI1_RX_DMA_STREAM
//#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)

15
keyboards/bastardkb/skeletyl/blackpill/rules.mk
View File

@@ -1,9 +1,3 @@
# MCU name
MCU = STM32F411
BOARD = BLACKPILL_STM32_F411
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
@@ -11,7 +5,7 @@ BOOTLOADER = stm32-dfu
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
@@ -30,8 +24,13 @@ LAYOUTS = split_3x5_3
MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
KEYBOARD_SHARED_EP = yes
EEPROM_DRIVER = spi
#EEPROM_DRIVER = spi
WS2812_DRIVER = pwm
SERIAL_DRIVER = usart
DEBOUNCE_TYPE = asym_eager_defer_pk
VIA_ENABLE = yes
CAPS_WORD_ENABLE = yes

3
keyboards/bastardkb/skeletyl/config.h
View File

@@ -24,6 +24,9 @@
#define MATRIX_ROWS 8 // Rows are doubled-up.
#define MATRIX_COLS 5
#define BOOTMAGIC_LITE_ROW_RIGHT 4
#define BOOTMAGIC_LITE_COLUMN_RIGHT 0
#define DIODE_DIRECTION ROW2COL
/* Set 0 if debouncing isn't needed. */

53
keyboards/bastardkb/skeletyl/keymaps/tompi/config.h Normal file
View File

@@ -0,0 +1,53 @@
/*
Copyright 2020 Pierre Chevalier <pierrechevalier83@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define BOTH_SHIFTS_TURNS_ON_CAPS_WORD
// Set the mouse settings to a comfortable speed/accuracy trade-off,
// assuming a screen refresh rate of 60 Htz or higher
// The default is 50. This makes the mouse ~3 times faster and more accurate
#define MOUSEKEY_INTERVAL 16
// The default is 20. Since we made the mouse about 3 times faster with the previous setting,
// give it more time to accelerate to max speed to retain precise control over short distances.
#define MOUSEKEY_TIME_TO_MAX 40
// The default is 300. Let's try and make this as low as possible while keeping the cursor responsive
#define MOUSEKEY_DELAY 100
// It makes sense to use the same delay for the mouseweel
#define MOUSEKEY_WHEEL_DELAY 100
// The default is 100
#define MOUSEKEY_WHEEL_INTERVAL 50
// The default is 40
#define MOUSEKEY_WHEEL_TIME_TO_MAX 100
// Pick good defaults for enabling homerow modifiers
#define TAPPING_TERM 280
// #define PERMISSIVE_HOLD
#define IGNORE_MOD_TAP_INTERRUPT
#define TAPPING_FORCE_HOLD
//#define RETRO_TAPPING
// Underglow configuration
#ifdef RGBLIGHT_ENABLE
#define RGBLIGHT_ANIMATIONS
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif
#define UNICODE_SELECTED_MODES UC_MAC

277
keyboards/bastardkb/skeletyl/keymaps/tompi/keymap.json Normal file
View File

@@ -0,0 +1,277 @@
{
"version": 1,
"notes": "My awesome keymap",
"documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs>\n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n",
"keyboard": "bastardkb/skeletyl",
"keymap": "default",
"layout": "LAYOUT_split_3x5_3",
"layers": [
[
"KC_Q",
"KC_W",
"KC_F",
"KC_P",
"KC_B",
"KC_J",
"KC_L",
"KC_U",
"KC_Y",
"KC_SCLN",
"LGUI_T(KC_A)",
"LALT_T(KC_R)",
"LCTL_T(KC_S)",
"LSFT_T(KC_T)",
"KC_G",
"KC_M",
"RSFT_T(KC_N)",
"LCTL_T(KC_E)",
"LALT_T(KC_I)",
"LGUI_T(KC_O)",
"KC_Z",
"KC_X",
"KC_C",
"KC_D",
"LT(5,KC_V)",
"LT(1,KC_K)",
"KC_H",
"KC_COMM",
"KC_DOT",
"KC_SLSH",
"LT(6,KC_ESC)",
"LT(3,KC_SPC)",
"LT(5,KC_TAB)",
"LT(1,KC_DEL)",
"LT(2,KC_BSPC)",
"LT(4,KC_ENT)"
],
[
"KC_VOLU",
"KC_WH_L",
"KC_MS_U",
"KC_WH_U",
"KC_WH_R",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_MS_L",
"KC_BTN2",
"KC_BTN1",
"KC_MS_R",
"KC_MUTE",
"KC_NO",
"KC_BTN1",
"KC_BTN2",
"KC_BTN3",
"KC_NO",
"KC_VOLD",
"KC_MNXT",
"KC_MS_D",
"KC_WH_D",
"KC_MPLY",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_TRNS",
"KC_TRNS",
"KC_NO",
"KC_NO",
"KC_NO"
],
[
"KC_NO",
"KC_HOME",
"KC_DEL",
"KC_PGUP",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_LEFT",
"KC_UP",
"KC_RGHT",
"KC_NO",
"KC_NO",
"KC_TRNS",
"KC_TRNS",
"KC_TRNS",
"KC_TRNS",
"KC_NO",
"KC_END",
"KC_DOWN",
"KC_PGDN",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_TRNS",
"KC_TRNS",
"KC_NO",
"KC_NO",
"KC_NO"
],
[
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_AT",
"KC_UNDS",
"KC_PIPE",
"KC_QUOT",
"KC_ESC",
"KC_TRNS",
"KC_TRNS",
"KC_TRNS",
"KC_TRNS",
"KC_NO",
"KC_HASH",
"KC_TAB",
"KC_EXLM",
"KC_DQUO",
"KC_DLR",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_TILD",
"KC_QUOT",
"KC_BSLS",
"KC_SLSH",
"KC_AMPR",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_TRNS",
"KC_TRNS",
"KC_NO"
],
[
"KC_PERC",
"KC_COLN",
"KC_LT",
"KC_GT",
"KC_SCLN",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_LCBR",
"KC_RCBR",
"KC_LPRN",
"KC_RPRN",
"KC_AT",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_MINS",
"KC_EXLM",
"KC_LBRC",
"KC_RBRC",
"KC_TRNS",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_TRNS",
"KC_TRNS",
"KC_TRNS",
"KC_NO",
"KC_NO"
],
[
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_F7",
"KC_F8",
"KC_F9",
"KC_F10",
"KC_NO",
"KC_BTN3",
"KC_BTN2",
"KC_BTN1",
"KC_NO",
"KC_NO",
"KC_F4",
"KC_F5",
"KC_F6",
"KC_F11",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_F1",
"KC_F2",
"KC_F3",
"KC_F12",
"KC_TRNS",
"KC_TRNS",
"KC_TRNS",
"KC_TRNS",
"KC_TRNS",
"KC_TRNS"
],
[
"KC_A",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_PPLS",
"KC_P7",
"KC_P8",
"KC_P9",
"KC_PAST",
"KC_TRNS",
"KC_TRNS",
"KC_TRNS",
"KC_TRNS",
"KC_NO",
"KC_PMNS",
"KC_P4",
"KC_B",
"KC_P6",
"KC_PSLS",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_P0",
"KC_P1",
"KC_P2",
"KC_P3",
"KC_PEQL",
"KC_NO",
"KC_NO",
"KC_NO",
"KC_TRNS",
"KC_TRNS",
"KC_P0"
]
],
"author": "thomas.haukland@gmail.com"
}

4
keyboards/bastardkb/skeletyl/keymaps/tompi/readme.md Normal file
View File

@@ -0,0 +1,4 @@
This is basically the default keymap, changed to Colemak DH.
Also thumb non-homing are changed to ESC and Enter.
Also

8
keyboards/bastardkb/skeletyl/skeletyl.c
View File

@@ -79,3 +79,11 @@ led_config_t g_led_config = { {
} };
#endif
// clang-format on
void keyboard_post_init_user(void) {
// Customise these values to desired behaviour
//debug_enable=true;
//debug_matrix=true;
//debug_keyboard=true;
//debug_mouse=true;
}