arne/cheapino_qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge branch 'develop' of github.com:qmk/qmk_firmware into develop

Browse Source
This commit is contained in:
Thomas Haukland
2022-08-21 10:03:29 +02:00
parent 68eaa2ea99 efd893be39
commit e224ec4fc6
1160 changed files with 7295 additions and 2941 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
builddefs/mcu_selection.mk
View File

@@ -359,7 +359,7 @@ ifneq ($(findstring STM32F401, $(MCU)),)
# Board: it should exist either in <chibios>/os/hal/boards/,
# <keyboard_dir>/boards/, or drivers/boards/
BOARD ?= BLACKPILL_STM32_F401
BOARD ?= GENERIC_STM32_F401XC
USE_FPU ?= yes
@@ -475,7 +475,7 @@ ifneq ($(findstring STM32F411, $(MCU)),)
# Board: it should exist either in <chibios>/os/hal/boards/,
# <keyboard_dir>/boards/, or drivers/boards/
BOARD ?= BLACKPILL_STM32_F411
BOARD ?= GENERIC_STM32_F411XE
USE_FPU ?= yes

2
data/templates/keyboard/readme.md
View File

@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

17
docs/cli_commands.md
View File

@@ -90,6 +90,8 @@ This command is similar to `qmk compile`, but can also target a bootloader. The
This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
This command can also flash binary firmware files (hex or bin) such as the ones produced by [Configurator](https://config.qmk.fm).
**Usage for Configurator Exports**:
```
@@ -102,6 +104,21 @@ qmk flash [-bl <bootloader>] [-c] [-e <var>=<value>] [-j <num_jobs>] <configurat
qmk flash -kb <keyboard_name> -km <keymap_name> [-bl <bootloader>] [-c] [-e <var>=<value>] [-j <num_jobs>]
```
**Usage for pre-compiled firmwares**:
**Note**: The microcontroller needs to be specified (`-m` argument) for keyboards with the following bootloaders:
* HalfKay
* QMK HID
* USBaspLoader
ISP flashing is also supported with the following flashers and require the microcontroller to be specified:
* USBasp
* USBtinyISP
```
qmk flash [-m <microcontroller>] <compiledFirmware.[bin|hex]>
```
**Listing the Bootloaders**
```

2
docs/data_driven_config.md
View File

@@ -22,7 +22,7 @@ You will then need to add support for your new configuration to `info.json`. The
1. Add it to the schema in `data/schemas/keyboards.jsonschema`
1. Add a mapping in `data/maps`
1. (optional and discoraged) Add code to extract/generate it to:
1. (optional and discouraged) Add code to extract/generate it to:
* `lib/python/qmk/info.py`
* `lib/python/qmk/cli/generate/config_h.py`
* `lib/python/qmk/cli/generate/rules_mk.py`

5
docs/squeezing_avr.md
View File

@@ -188,7 +188,10 @@ If you've done all of this, and your firmware is still too large, then it's time
That said, there are a number of Pro Micro replacements with ARM controllers:
* [Proton C](https://qmk.fm/proton-c/) (out of stock)
* [Bonsai C](https://github.com/customMK/Bonsai-C) (Open Source, DIY/PCBA)
* [Raspberry Pi 2040](https://www.sparkfun.com/products/18288) (not currently supported, no ETA)
* [STeMCell](https://github.com/megamind4089/STeMCell) (Open Source, DIY/PCBA)
* [Adafruit KB2040](https://learn.adafruit.com/adafruit-kb2040)
* [SparkFun Pro Micro - RP2040](https://www.sparkfun.com/products/18288)
* [Blok](https://boardsource.xyz/store/628b95b494dfa308a6581622)
There are other, non-Pro Micro compatible boards out there. The most popular being:
* [WeAct Blackpill F411](https://www.aliexpress.com/item/1005001456186625.html) (~$6 USD)

2
keyboards/0xc7/61key/readme.md
View File

@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/1upkeyboards/super16v2/readme.md
View File

@@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/40percentclub/polyandry/readme.md
View File

@@ -48,6 +48,6 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the top left key of the keyboard (top right or bottom left in horizontal configuration)
* **Physical reset**: Briefly press the button on the bottom of the microcontroller or, if not present short the pin marked RST to a GND.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

2
keyboards/a_dux/readme.md
View File

@@ -41,5 +41,5 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
* **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured.

2
keyboards/acheron/apollo/readme.md
View File

@@ -24,7 +24,7 @@ The DFU state in the bootloader can be accessed in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: press the physical button on the back of the PCB for at least five seconds
* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout)
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout)
### Step 2: compile firmware

2
keyboards/acheron/elongate/beta/readme.md
View File

@@ -20,7 +20,7 @@ The DFU state in the bootloader can be accessed in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: press the button on the front of the PCB.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
## Compile firmware

2
keyboards/acheron/elongate/delta/readme.md
View File

@@ -20,7 +20,7 @@ The DFU state in the bootloader can be accessed in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds
* **Keycode in layout**: Press the key mapped to `RESET` if it is available (escape key at layer 2 in the default firmware)
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (escape key at layer 2 in the default firmware)
## Compile firmware

4
keyboards/acheron/shark/readme.md
View File

@@ -17,7 +17,7 @@ The DFU state in the bootloader can be accessed in 2 ways:
* **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: press the button on the back of the PCB
* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout)
* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout)
### Release Beta:
@@ -25,7 +25,7 @@ The DFU state in the bootloader can be accessed in 3 ways:
* **Bootmagic reset**: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: press the button on the back of the PCB, for at least five seconds
* **Keycode in layout**: press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout)
* **Keycode in layout**: press the key mapped to `QK_BOOT` if it is available (ESC key at layer 1 in the default layout)
## Compile firmware

2
keyboards/ada/ada1800mini/readme.md
View File

@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/ada/infinity81/readme.md
View File

@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/adm42/readme.md
View File

@@ -22,6 +22,6 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 3 ways:
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB

2
keyboards/adpenrose/kintsugi/readme.md
View File

@@ -34,4 +34,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the front of the Elite-C microcontroller _**before soldering**_ it to the PCB- some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

20
keyboards/ai/config.h Normal file
View File

@@ -0,0 +1,20 @@
// Copyright 2022 Louis Dalibard (@make42)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

51
keyboards/ai/info.json Normal file
View File

@@ -0,0 +1,51 @@
{
"manufacturer": "Louis Dalibard",
"keyboard_name": "ai",
"maintainer": "make42",
"bootloader": "caterina",
"diode_direction": "COL2ROW",
"features": {
"bootmagic": true,
"command": false,
"console": false,
"extrakey": true,
"mousekey": true,
"nkro": true
},
"matrix_pins": {
"cols": ["F5", "F6", "F7", "B1"],
"rows": ["D0", "D4", "C6", "D7", "D1"]
},
"processor": "atmega32u4",
"url": "",
"usb": {
"device_version": "1.0.0",
"pid": "0x0000",
"vid": "0xFEED"
},
"layouts": {
"LAYOUT_ai_5x4_1": {
"layout": [
{ "matrix": [0, 0], "x": 0, "y": 0.5 },
{ "matrix": [0, 1], "x": 1, "y": 0 },
{ "matrix": [0, 2], "x": 2, "y": 0.3 },
{ "matrix": [0, 3], "x": 3, "y": 0.7 },
{ "matrix": [1, 0], "x": 0, "y": 1.5 },
{ "matrix": [1, 1], "x": 1, "y": 1 },
{ "matrix": [1, 2], "x": 2, "y": 1.3 },
{ "matrix": [1, 3], "x": 3, "y": 1.7 },
{ "matrix": [2, 0], "x": 0, "y": 2.5 },
{ "matrix": [2, 1], "x": 1, "y": 2 },
{ "matrix": [2, 2], "x": 2, "y": 2.3 },
{ "matrix": [2, 3], "x": 3, "y": 2.7 },
{ "matrix": [3, 0], "x": 0, "y": 3.5 },
{ "matrix": [3, 1], "x": 1, "y": 3 },
{ "matrix": [3, 2], "x": 2, "y": 3.3 },
{ "matrix": [3, 3], "x": 3, "y": 3.7 },
{ "matrix": [4, 1], "x": 2.5, "y": 5 },
{ "matrix": [4, 2], "x": 3.5, "y": 4.8 },
{ "matrix": [4, 3], "x": 4.5, "y": 4.6 }
]
}
}
}

24
keyboards/ai/keymaps/default/keymap.c Normal file
View File

@@ -0,0 +1,24 @@
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/*
* ┌───┬───┬───┬───┐
* │Tab│ Q │ W │ E │
* ├───┼───┼───┼───┤
* │Bsp│ R │ T │ A │
* ├───┼───┼───┼───┤
* │Sft│ S │ D │ F │
* ├───┼───┼───┼───┤
* │Ctl│ Z │ X │ C │
* ├───┼───┼───┼───┤
* │NaN│App│GUI│Alt│
* └───┴───┴───┴───┘
*/
[0] = LAYOUT_ai_5x4_1(
KC_TAB, KC_Q, KC_W, KC_E,
KC_BSPC, KC_R, KC_T, KC_A,
KC_LSFT, KC_S, KC_D, KC_F,
KC_LCTL, KC_Z, KC_X, KC_C,
KC_MENU, KC_LGUI, KC_LALT
)
};

34
keyboards/ai/readme.md Normal file
View File

@@ -0,0 +1,34 @@
# ai
![ai](https://i.imgur.com/4l6BzRh.png)
This is a small open source 5x4-1 macropad powered by QMK
* Keyboard Maintainer: [Louis Dalibard](https://github.com/make42)
* Hardware Supported: The PCB for ai is located here: [ai](https://github.com/make42/ai)
* Hardware Availability: Here is a complete BOM with links to where you can find parts:
* PCB (I personally used JLCPCB)
* Arduino Pro Micro ([Aliexpress](https://fr.aliexpress.com/item/32768308647.html?spm=a2g0o.order_list.0.0.3ccc5e5bU64POK&gatewayAdapt=glo2fra))
* Female pin rows ([Aliexpress]https://fr.aliexpress.com/item/4001122376295.html?spm=a2g0o.order_list.0.0.23845e5bTBt8sp&gatewayAdapt=glo2fra))
* Gateron hotswap sockets ([Aliexpress](https://fr.aliexpress.com/item/1005003129613578.html?spm=a2g0o.order_list.0.0.23845e5bTBt8sp&gatewayAdapt=glo2fra))
* Zener diodes ([Aliexpress](https://fr.aliexpress.com/item/1005003276184193.html?spm=a2g0o.order_list.0.0.23845e5bTBt8sp&gatewayAdapt=glo2fra))
* Keyswitches (use a compatible MX switch)
* Keycaps (Duh)
Make example for this keyboard (after setting up your build environment):
make ai:default
Flashing example for this keyboard:
make ai:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
- **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
- **Keycode in layout**: Press the key mapped to `RESET` if it is available

1
keyboards/ai/rules.mk Normal file
View File

@@ -0,0 +1 @@
# This file intentionally left blank

2
keyboards/ai03/jp60/readme.md
View File

@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/akb/ogr/readme.md
View File

@@ -26,4 +26,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/akb/ogrn/readme.md
View File

@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

26
keyboards/mode/m80v1/m80s/config.h → keyboards/aliceh66/pianoforte/config.h
View File

@@ -1,5 +1,5 @@
/*
Copyright 2020 Alvaro "Gondolindrim" Volpato <gondolindrim@acheronproject.com>
Copyright 2022 AliceH
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -17,6 +17,24 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
/* USB Device descriptor parameter */
#define PRODUCT_ID 0x0080
#define DEVICE_VER 0x0083 //S for solderable version
#define MATRIX_ROWS 12
#define MATRIX_COLS 9
#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, F1, F0, E6, B6 }
#define MATRIX_ROW_PINS { D1, D0, D3, D2, D5, B0, C6, C7, F6, F7, F5, F4 }
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
#define DYNAMIC_KEYMAP_LAYER_COUNT 2
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

503
keyboards/aliceh66/pianoforte/info.json Normal file
View File

@@ -0,0 +1,503 @@
{
"keyboard_name": "pianoforte solder",
"manufacturer": "AliceH",
"url": "https://github.com/AliceH66",
"maintainer": "AliceH66",
"usb": {
"device_version": "1.0.0",
"pid": "0x7066",
"vid": "0x6168"
},
"layouts": {
"LAYOUT": {
"layout": [
{"label":"Esc", "x":0, "y":0},
{"label":"F1", "x":1.25, "y":0},
{"label":"F2", "x":2.25, "y":0},
{"label":"F3", "x":3.25, "y":0},
{"label":"F4", "x":4.25, "y":0},
{"label":"F5", "x":5.5, "y":0},
{"label":"F6", "x":6.5, "y":0},
{"label":"F7", "x":7.5, "y":0},
{"label":"F8", "x":8.5, "y":0},
{"label":"F9", "x":9.75, "y":0},
{"label":"F10", "x":10.75, "y":0},
{"label":"F11", "x":11.75, "y":0},
{"label":"F12", "x":12.75, "y":0},
{"label":"F13", "x":14, "y":0},
{"label":"PrtSc", "x":15.25, "y":0},
{"label":"Scroll Lock", "x":16.25, "y":0},
{"label":"Pause Break", "x":17.25, "y":0},
{"label":"`~", "x":0, "y":1.25},
{"label":"1!", "x":1, "y":1.25},
{"label":"2@", "x":2, "y":1.25},
{"label":"3#", "x":3, "y":1.25},
{"label":"4$", "x":4, "y":1.25},
{"label":"5%", "x":5, "y":1.25},
{"label":"6^", "x":6, "y":1.25},
{"label":"7&", "x":7, "y":1.25},
{"label":"8*", "x":8, "y":1.25},
{"label":"9(", "x":9, "y":1.25},
{"label":"0)", "x":10, "y":1.25},
{"label":"-_", "x":11, "y":1.25},
{"label":"=+", "x":12, "y":1.25},
{"label":"Backspace", "x":13, "y":1.25},
{"label":"SB2", "x":14, "y":1.25},
{"label":"Insert", "x":15.25, "y":1.25},
{"label":"Home", "x":16.25, "y":1.25},
{"label":"PgUp", "x":17.25, "y":1.25},
{"label":"Tab", "x":0, "y":2.25, "w":1.5},
{"label":"Q", "x":1.5, "y":2.25},
{"label":"W", "x":2.5, "y":2.25},
{"label":"E", "x":3.5, "y":2.25},
{"label":"R", "x":4.5, "y":2.25},
{"label":"T", "x":5.5, "y":2.25},
{"label":"Y", "x":6.5, "y":2.25},
{"label":"U", "x":7.5, "y":2.25},
{"label":"I", "x":8.5, "y":2.25},
{"label":"O", "x":9.5, "y":2.25},
{"label":"P", "x":10.5, "y":2.25},
{"label":"[{", "x":11.5, "y":2.25},
{"label":"]}", "x":12.5, "y":2.25},
{"label":"Pipe", "x":13.5, "y":2.25, "w":1.5},
{"label":"Delete", "x":15.25, "y":2.25},
{"label":"End", "x":16.25, "y":2.25},
{"label":"PgDn", "x":17.25, "y":2.25},
{"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
{"label":"A", "x":1.75, "y":3.25},
{"label":"S", "x":2.75, "y":3.25},
{"label":"D", "x":3.75, "y":3.25},
{"label":"F", "x":4.75, "y":3.25},
{"label":"G", "x":5.75, "y":3.25},
{"label":"H", "x":6.75, "y":3.25},
{"label":"J", "x":7.75, "y":3.25},
{"label":"K", "x":8.75, "y":3.25},
{"label":"L", "x":9.75, "y":3.25},
{"label":";:", "x":10.75, "y":3.25},
{"label":"'\"", "x":11.75, "y":3.25},
{"label":"Enter", "x":12.75, "y":3.25, "w":2.25},
{"label":"Shift", "x":0, "y":4.25, "w":1.25},
{"label":"ISO Pipe", "x":1.25, "y":4.25, "w":1},
{"label":"Z", "x":2.25, "y":4.25},
{"label":"X", "x":3.25, "y":4.25},
{"label":"C", "x":4.25, "y":4.25},
{"label":"V", "x":5.25, "y":4.25},
{"label":"B", "x":6.25, "y":4.25},
{"label":"N", "x":7.25, "y":4.25},
{"label":"M", "x":8.25, "y":4.25},
{"label":"<", "x":9.25, "y":4.25},
{"label":">", "x":10.25, "y":4.25},
{"label":"?", "x":11.25, "y":4.25},
{"label":"Shift", "x":12.25, "y":4.25, "w":1.75},
{"label":"Shift", "x":12.24, "y":4.25, "w":2.75},
{"label":"Fn", "x":14, "y":4.25},
{"label":"\u2191", "x":16.25, "y":4.25},
{"label":"Ctrl", "x":0, "y":5.25, "w":1.25},
{"label":"Win", "x":1.25, "y":5.25, "w":1.25},
{"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
{"label":"Space", "x":4, "y":5.25, "w":7},
{"label":"Alt", "x":10, "y":5.25, "w":1.25},
{"label":"Alt", "x":11, "y":5.25, "w":1.25},
{"label":"Win", "x":11.25, "y":5.25, "w":1.25},
{"label": "MO(1)", "x":12.5, "y": 5.25, "w":1.25},
{"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25},
{"label":"\u2190", "x":15.25, "y":5.25},
{"label":"\u2193", "x":16.25, "y":5.25},
{"label":"\u2192", "x":17.25, "y":5.25}
]
},
"LAYOUT_tkl_ansi": {
"layout": [
{"label":"Esc", "x":0, "y":0},
{"label":"F1", "x":1.25, "y":0},
{"label":"F2", "x":2.25, "y":0},
{"label":"F3", "x":3.25, "y":0},
{"label":"F4", "x":4.25, "y":0},
{"label":"F5", "x":5.5, "y":0},
{"label":"F6", "x":6.5, "y":0},
{"label":"F7", "x":7.5, "y":0},
{"label":"F8", "x":8.5, "y":0},
{"label":"F9", "x":9.75, "y":0},
{"label":"F10", "x":10.75, "y":0},
{"label":"F11", "x":11.75, "y":0},
{"label":"F12", "x":12.75, "y":0},
{"label":"F13", "x":14, "y":0},
{"label":"PrtSc", "x":15.25, "y":0},
{"label":"Scroll Lock", "x":16.25, "y":0},
{"label":"Pause Break", "x":17.25, "y":0},
{"label":"`~", "x":0, "y":1.25},
{"label":"1!", "x":1, "y":1.25},
{"label":"2@", "x":2, "y":1.25},
{"label":"3#", "x":3, "y":1.25},
{"label":"4$", "x":4, "y":1.25},
{"label":"5%", "x":5, "y":1.25},
{"label":"6^", "x":6, "y":1.25},
{"label":"7&", "x":7, "y":1.25},
{"label":"8*", "x":8, "y":1.25},
{"label":"9(", "x":9, "y":1.25},
{"label":"0)", "x":10, "y":1.25},
{"label":"-_", "x":11, "y":1.25},
{"label":"=+", "x":12, "y":1.25},
{"label":"Backspace", "x":13, "y":1.25, "w":2},
{"label":"Insert", "x":15.25, "y":1.25},
{"label":"Home", "x":16.25, "y":1.25},
{"label":"PgUp", "x":17.25, "y":1.25},
{"label":"Tab", "x":0, "y":2.25, "w":1.5},
{"label":"Q", "x":1.5, "y":2.25},
{"label":"W", "x":2.5, "y":2.25},
{"label":"E", "x":3.5, "y":2.25},
{"label":"R", "x":4.5, "y":2.25},
{"label":"T", "x":5.5, "y":2.25},
{"label":"Y", "x":6.5, "y":2.25},
{"label":"U", "x":7.5, "y":2.25},
{"label":"I", "x":8.5, "y":2.25},
{"label":"O", "x":9.5, "y":2.25},
{"label":"P", "x":10.5, "y":2.25},
{"label":"[{", "x":11.5, "y":2.25},
{"label":"]}", "x":12.5, "y":2.25},
{"label":"Pipe", "x":13.5, "y":2.25, "w":1.5},
{"label":"Delete", "x":15.25, "y":2.25},
{"label":"End", "x":16.25, "y":2.25},
{"label":"PgDn", "x":17.25, "y":2.25},
{"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
{"label":"A", "x":1.75, "y":3.25},
{"label":"S", "x":2.75, "y":3.25},
{"label":"D", "x":3.75, "y":3.25},
{"label":"F", "x":4.75, "y":3.25},
{"label":"G", "x":5.75, "y":3.25},
{"label":"H", "x":6.75, "y":3.25},
{"label":"J", "x":7.75, "y":3.25},
{"label":"K", "x":8.75, "y":3.25},
{"label":"L", "x":9.75, "y":3.25},
{"label":";:", "x":10.75, "y":3.25},
{"label":"'\"", "x":11.75, "y":3.25},
{"label":"Enter", "x":12.75, "y":3.25, "w":2.25},
{"label":"Shift", "x":0, "y":4.25, "w":2.25},
{"label":"Z", "x":2.25, "y":4.25},
{"label":"X", "x":3.25, "y":4.25},
{"label":"C", "x":4.25, "y":4.25},
{"label":"V", "x":5.25, "y":4.25},
{"label":"B", "x":6.25, "y":4.25},
{"label":"N", "x":7.25, "y":4.25},
{"label":"M", "x":8.25, "y":4.25},
{"label":"<", "x":9.25, "y":4.25},
{"label":">", "x":10.25, "y":4.25},
{"label":"?", "x":11.25, "y":4.25},
{"label":"Shift", "x":12.25, "y":4.25, "w":2.75},
{"label":"\u2191", "x":16.25, "y":4.25},
{"label":"Ctrl", "x":0, "y":5.25, "w":1.25},
{"label":"Win", "x":1.25, "y":5.25, "w":1.25},
{"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
{"label":"Space", "x":4, "y":5.25, "w":6.25},
{"label":"Alt", "x":10, "y":5.25, "w":1.25},
{"label":"Win", "x":11.25, "y":5.25, "w":1.25},
{"label":"MO(1)", "x":12.5, "y":5.25, "w":1.25},
{"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25},
{"label":"\u2190", "x":15.25, "y":5.25},
{"label":"\u2193", "x":16.25, "y":5.25},
{"label":"\u2192", "x":17.25, "y":5.25}
]
},
"LAYOUT_tkl_iso": {
"layout": [
{"label":"Esc", "x":0, "y":0},
{"label":"F1", "x":1.25, "y":0},
{"label":"F2", "x":2.25, "y":0},
{"label":"F3", "x":3.25, "y":0},
{"label":"F4", "x":4.25, "y":0},
{"label":"F5", "x":5.5, "y":0},
{"label":"F6", "x":6.5, "y":0},
{"label":"F7", "x":7.5, "y":0},
{"label":"F8", "x":8.5, "y":0},
{"label":"F9", "x":9.75, "y":0},
{"label":"F10", "x":10.75, "y":0},
{"label":"F11", "x":11.75, "y":0},
{"label":"F12", "x":12.75, "y":0},
{"label":"F13", "x":14, "y":0},
{"label":"PrtSc", "x":15.25, "y":0},
{"label":"Scroll Lock", "x":16.25, "y":0},
{"label":"Pause Break", "x":17.25, "y":0},
{"label":"`~", "x":0, "y":1.25},
{"label":"1!", "x":1, "y":1.25},
{"label":"2@", "x":2, "y":1.25},
{"label":"3#", "x":3, "y":1.25},
{"label":"4$", "x":4, "y":1.25},
{"label":"5%", "x":5, "y":1.25},
{"label":"6^", "x":6, "y":1.25},
{"label":"7&", "x":7, "y":1.25},
{"label":"8*", "x":8, "y":1.25},
{"label":"9(", "x":9, "y":1.25},
{"label":"0)", "x":10, "y":1.25},
{"label":"-_", "x":11, "y":1.25},
{"label":"=+", "x":12, "y":1.25},
{"label":"Backspace", "x":13, "y":1.25, "w":2},
{"label":"Insert", "x":15.25, "y":1.25},
{"label":"Home", "x":16.25, "y":1.25},
{"label":"PgUp", "x":17.25, "y":1.25},
{"label":"Tab", "x":0, "y":2.25, "w":1.5},
{"label":"Q", "x":1.5, "y":2.25},
{"label":"W", "x":2.5, "y":2.25},
{"label":"E", "x":3.5, "y":2.25},
{"label":"R", "x":4.5, "y":2.25},
{"label":"T", "x":5.5, "y":2.25},
{"label":"Y", "x":6.5, "y":2.25},
{"label":"U", "x":7.5, "y":2.25},
{"label":"I", "x":8.5, "y":2.25},
{"label":"O", "x":9.5, "y":2.25},
{"label":"P", "x":10.5, "y":2.25},
{"label":"[{", "x":11.5, "y":2.25},
{"label":"]}", "x":12.5, "y":2.25},
{"label":"Delete", "x":15.25, "y":2.25},
{"label":"End", "x":16.25, "y":2.25},
{"label":"PgDn", "x":17.25, "y":2.25},
{"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
{"label":"A", "x":1.75, "y":3.25},
{"label":"S", "x":2.75, "y":3.25},
{"label":"D", "x":3.75, "y":3.25},
{"label":"F", "x":4.75, "y":3.25},
{"label":"G", "x":5.75, "y":3.25},
{"label":"H", "x":6.75, "y":3.25},
{"label":"J", "x":7.75, "y":3.25},
{"label":"K", "x":8.75, "y":3.25},
{"label":"L", "x":9.75, "y":3.25},
{"label":";:", "x":10.75, "y":3.25},
{"label":"'", "x":11.75, "y":3.25},
{"label":"ISO #", "x":12.75, "y":3.25},
{"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2},
{"label":"Shift", "x":0, "y":4.25, "w":2.25},
{"label":"ISO Pipe", "x":1.25, "y":4.25, "w":1},
{"label":"Z", "x":2.25, "y":4.25},
{"label":"X", "x":3.25, "y":4.25},
{"label":"C", "x":4.25, "y":4.25},
{"label":"V", "x":5.25, "y":4.25},
{"label":"B", "x":6.25, "y":4.25},
{"label":"N", "x":7.25, "y":4.25},
{"label":"M", "x":8.25, "y":4.25},
{"label":"<", "x":9.25, "y":4.25},
{"label":">", "x":10.25, "y":4.25},
{"label":"?", "x":11.25, "y":4.25},
{"label":"Shift", "x":12.25, "y":4.25, "w":2.75},
{"label":"\u2191", "x":16.25, "y":4.25},
{"label":"Ctrl", "x":0, "y":5.25, "w":1.25},
{"label":"Win", "x":1.25, "y":5.25, "w":1.25},
{"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
{"label":"Space", "x":4, "y":5.25, "w":6.25},
{"label":"Alt", "x":10, "y":5.25, "w":1.25},
{"label":"Win", "x":11.25, "y":5.25, "w":1.25},
{"label":"MO(1)", "x":12.5, "y":5.25, "w":1.25},
{"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25},
{"label":"\u2190", "x":15.25, "y":5.25},
{"label":"\u2193", "x":16.25, "y":5.25},
{"label":"\u2192", "x":17.25, "y":5.25}
]
},
"LAYOUT_tkl_ansi_7u": {
"layout": [
{"label":"Esc", "x":0, "y":0},
{"label":"F1", "x":1.25, "y":0},
{"label":"F2", "x":2.25, "y":0},
{"label":"F3", "x":3.25, "y":0},
{"label":"F4", "x":4.25, "y":0},
{"label":"F5", "x":5.5, "y":0},
{"label":"F6", "x":6.5, "y":0},
{"label":"F7", "x":7.5, "y":0},
{"label":"F8", "x":8.5, "y":0},
{"label":"F9", "x":9.75, "y":0},
{"label":"F10", "x":10.75, "y":0},
{"label":"F11", "x":11.75, "y":0},
{"label":"F12", "x":12.75, "y":0},
{"label":"F13", "x":14, "y":0},
{"label":"PrtSc", "x":15.25, "y":0},
{"label":"Scroll Lock", "x":16.25, "y":0},
{"label":"Pause Break", "x":17.25, "y":0},
{"label":"`~", "x":0, "y":1.25},
{"label":"1!", "x":1, "y":1.25},
{"label":"2@", "x":2, "y":1.25},
{"label":"3#", "x":3, "y":1.25},
{"label":"4$", "x":4, "y":1.25},
{"label":"5%", "x":5, "y":1.25},
{"label":"6^", "x":6, "y":1.25},
{"label":"7&", "x":7, "y":1.25},
{"label":"8*", "x":8, "y":1.25},
{"label":"9(", "x":9, "y":1.25},
{"label":"0)", "x":10, "y":1.25},
{"label":"-_", "x":11, "y":1.25},
{"label":"=+", "x":12, "y":1.25},
{"label":"Backspace", "x":13, "y":1.25, "w":2},
{"label":"Insert", "x":15.25, "y":1.25},
{"label":"Home", "x":16.25, "y":1.25},
{"label":"PgUp", "x":17.25, "y":1.25},
{"label":"Tab", "x":0, "y":2.25, "w":1.5},
{"label":"Q", "x":1.5, "y":2.25},
{"label":"W", "x":2.5, "y":2.25},
{"label":"E", "x":3.5, "y":2.25},
{"label":"R", "x":4.5, "y":2.25},
{"label":"T", "x":5.5, "y":2.25},
{"label":"Y", "x":6.5, "y":2.25},
{"label":"U", "x":7.5, "y":2.25},
{"label":"I", "x":8.5, "y":2.25},
{"label":"O", "x":9.5, "y":2.25},
{"label":"P", "x":10.5, "y":2.25},
{"label":"[{", "x":11.5, "y":2.25},
{"label":"]}", "x":12.5, "y":2.25},
{"label":"Pipe", "x":13.5, "y":2.25, "w":1.5},
{"label":"Delete", "x":15.25, "y":2.25},
{"label":"End", "x":16.25, "y":2.25},
{"label":"PgDn", "x":17.25, "y":2.25},
{"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
{"label":"A", "x":1.75, "y":3.25},
{"label":"S", "x":2.75, "y":3.25},
{"label":"D", "x":3.75, "y":3.25},
{"label":"F", "x":4.75, "y":3.25},
{"label":"G", "x":5.75, "y":3.25},
{"label":"H", "x":6.75, "y":3.25},
{"label":"J", "x":7.75, "y":3.25},
{"label":"K", "x":8.75, "y":3.25},
{"label":"L", "x":9.75, "y":3.25},
{"label":";:", "x":10.75, "y":3.25},
{"label":"'\"", "x":11.75, "y":3.25},
{"label":"Enter", "x":12.75, "y":3.25, "w":2.25},
{"label":"Shift", "x":0, "y":4.25, "w":2.25},
{"label":"Z", "x":2.25, "y":4.25},
{"label":"X", "x":3.25, "y":4.25},
{"label":"C", "x":4.25, "y":4.25},
{"label":"V", "x":5.25, "y":4.25},
{"label":"B", "x":6.25, "y":4.25},
{"label":"N", "x":7.25, "y":4.25},
{"label":"M", "x":8.25, "y":4.25},
{"label":"<", "x":9.25, "y":4.25},
{"label":">", "x":10.25, "y":4.25},
{"label":"?", "x":11.25, "y":4.25},
{"label":"Shift", "x":12.25, "y":4.25, "w":2.75},
{"label":"\u2191", "x":16.25, "y":4.25},
{"label":"Ctrl", "x":0, "y":5.25, "w":1.5},
{"label":"Win", "x":1.5, "y":5.25, "w":1},
{"label":"Alt", "x":2.5, "y":5.25, "w":1.5},
{"label":"Space", "x":4, "y":5.25, "w":7},
{"label":"Alt", "x":11, "y":5.25, "w":1.5},
{"label":"Win", "x":12.5, "y":5.25, "w":1},
{"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5},
{"label":"\u2190", "x":15.25, "y":5.25},
{"label":"\u2193", "x":16.25, "y":5.25},
{"label":"\u2192", "x":17.25, "y":5.25}
]
},
"LAYOUT_tkl_iso_7u": {
"layout": [
{"label":"Esc", "x":0, "y":0},
{"label":"F1", "x":1.25, "y":0},
{"label":"F2", "x":2.25, "y":0},
{"label":"F3", "x":3.25, "y":0},
{"label":"F4", "x":4.25, "y":0},
{"label":"F5", "x":5.5, "y":0},
{"label":"F6", "x":6.5, "y":0},
{"label":"F7", "x":7.5, "y":0},
{"label":"F8", "x":8.5, "y":0},
{"label":"F9", "x":9.75, "y":0},
{"label":"F10", "x":10.75, "y":0},
{"label":"F11", "x":11.75, "y":0},
{"label":"F12", "x":12.75, "y":0},
{"label":"F13", "x":14, "y":0},
{"label":"PrtSc", "x":15.25, "y":0},
{"label":"Scroll Lock", "x":16.25, "y":0},
{"label":"Pause Break", "x":17.25, "y":0},
{"label":"`~", "x":0, "y":1.25},
{"label":"1!", "x":1, "y":1.25},
{"label":"2@", "x":2, "y":1.25},
{"label":"3#", "x":3, "y":1.25},
{"label":"4$", "x":4, "y":1.25},
{"label":"5%", "x":5, "y":1.25},
{"label":"6^", "x":6, "y":1.25},
{"label":"7&", "x":7, "y":1.25},
{"label":"8*", "x":8, "y":1.25},
{"label":"9(", "x":9, "y":1.25},
{"label":"0)", "x":10, "y":1.25},
{"label":"-_", "x":11, "y":1.25},
{"label":"=+", "x":12, "y":1.25},
{"label":"Backspace", "x":13, "y":1.25, "w":2},
{"label":"Insert", "x":15.25, "y":1.25},
{"label":"Home", "x":16.25, "y":1.25},
{"label":"PgUp", "x":17.25, "y":1.25},
{"label":"Tab", "x":0, "y":2.25, "w":1.5},
{"label":"Q", "x":1.5, "y":2.25},
{"label":"W", "x":2.5, "y":2.25},
{"label":"E", "x":3.5, "y":2.25},
{"label":"R", "x":4.5, "y":2.25},
{"label":"T", "x":5.5, "y":2.25},
{"label":"Y", "x":6.5, "y":2.25},
{"label":"U", "x":7.5, "y":2.25},
{"label":"I", "x":8.5, "y":2.25},
{"label":"O", "x":9.5, "y":2.25},
{"label":"P", "x":10.5, "y":2.25},
{"label":"[{", "x":11.5, "y":2.25},
{"label":"]}", "x":12.5, "y":2.25},
{"label":"Delete", "x":15.25, "y":2.25},
{"label":"End", "x":16.25, "y":2.25},
{"label":"PgDn", "x":17.25, "y":2.25},
{"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
{"label":"A", "x":1.75, "y":3.25},
{"label":"S", "x":2.75, "y":3.25},
{"label":"D", "x":3.75, "y":3.25},
{"label":"F", "x":4.75, "y":3.25},
{"label":"G", "x":5.75, "y":3.25},
{"label":"H", "x":6.75, "y":3.25},
{"label":"J", "x":7.75, "y":3.25},
{"label":"K", "x":8.75, "y":3.25},
{"label":"L", "x":9.75, "y":3.25},
{"label":";:", "x":10.75, "y":3.25},
{"label":"'", "x":11.75, "y":3.25},
{"label":"ISO #", "x":12.75, "y":3.25},
{"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2},
{"label":"Shift", "x":0, "y":4.25, "w":2.25},
{"label":"ISO Pipe", "x":1.25, "y":4.25, "w":1},
{"label":"Z", "x":2.25, "y":4.25},
{"label":"X", "x":3.25, "y":4.25},
{"label":"C", "x":4.25, "y":4.25},
{"label":"V", "x":5.25, "y":4.25},
{"label":"B", "x":6.25, "y":4.25},
{"label":"N", "x":7.25, "y":4.25},
{"label":"M", "x":8.25, "y":4.25},
{"label":"<", "x":9.25, "y":4.25},
{"label":">", "x":10.25, "y":4.25},
{"label":"?", "x":11.25, "y":4.25},
{"label":"Shift", "x":12.25, "y":4.25, "w":2.75},
{"label":"\u2191", "x":16.25, "y":4.25},
{"label":"Ctrl", "x":0, "y":5.25, "w":1.5},
{"label":"Win", "x":1.5, "y":5.25, "w":1},
{"label":"Alt", "x":2.5, "y":5.25, "w":1.5},
{"label":"Space", "x":4, "y":5.25, "w":7},
{"label":"Alt", "x":11, "y":5.25, "w":1.5},
{"label":"Win", "x":12.5, "y":5.25, "w":1},
{"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5},
{"label":"\u2190", "x":15.25, "y":5.25},
{"label":"\u2193", "x":16.25, "y":5.25},
{"label":"\u2192", "x":17.25, "y":5.25}
]
}
}
}

33
keyboards/aliceh66/pianoforte/keymaps/default/keymap.c Normal file
View File

@@ -0,0 +1,33 @@
/*
Copyright 2022 AliceH <hayasakakb@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum layer_names {
_LAYER0,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LAYER0] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, MO(1),
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, MO(1), KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
)
};

33
keyboards/aliceh66/pianoforte/keymaps/iso/keymap.c Normal file
View File

@@ -0,0 +1,33 @@
/*
Copyright 2022 AliceH <hayasakakb@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum layer_names {
_LAYER0,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LAYER0] = LAYOUT_tkl_iso(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
)
};

43
keyboards/aliceh66/pianoforte/keymaps/via/keymap.c Normal file
View File

@@ -0,0 +1,43 @@
/*
Copyright 2022 AliceH <hayasakakb@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum layer_names {
_LAYER0,
_LAYER1,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LAYER0] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, MO(1),
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, MO(1), KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[_LAYER1] = LAYOUT(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};

1
keyboards/aliceh66/pianoforte/keymaps/via/rules.mk Normal file
View File

@@ -0,0 +1 @@
VIA_ENABLE = yes

8
keyboards/studiokestra/galatea/rev2/config.h → keyboards/aliceh66/pianoforte/pianoforte.c
View File

@@ -1,5 +1,5 @@
/*
Copyright 2021 Studio Kestra
Copyright 2022 AliceH
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -14,8 +14,4 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define PRODUCT_ID 0x8802
#define DEVICE_VER 0x0002
#include "pianoforte.h"

131
keyboards/aliceh66/pianoforte/pianoforte.h Normal file
View File

@@ -0,0 +1,131 @@
/*
Copyright 2022 AliceH
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define ____ KC_NO
#define LAYOUT( \
K000, K010, K001, K011, K002, K012, K003, K013, K004, K014, K005, K015, K006, K016, K007, K017, K008, \
K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K027, K037, K028, \
K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056, K047, K057, K048, \
K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K066, K076, K067, \
K080, K090, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K086, K096, K087, K097, \
K100, K110, K101, K113, K105, K115, K106, K116, K107, K117, K108 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \
{ K010, K011, K012, K013, K014, K015, K016, K017, ____ }, \
{ K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \
{ K030, K031, K032, K033, K034, K035, K036, K037, ____ }, \
{ K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \
{ K050, K051, K052, K053, K054, K055, K056, K057, ____ }, \
{ K060, K061, K062, K063, K064, K065, K066, K067, ____ }, \
{ K070, K071, K072, K073, K074, K075, K076, ____, ____ }, \
{ K080, K081, K082, K083, K084, K085, K086, K087, ____ }, \
{ K090, K091, K092, K093, K094, K095, K096, K097, ____ }, \
{ K100, K101, ____, ____, ____, ____, K106, K107, K108 }, \
{ K110, ____, ____, K113, ____, K115, K116, K117, ____ } \
}
#define LAYOUT_tkl_ansi( \
K000, K010, K001, K011, K002, K012, K003, K013, K004, K014, K005, K015, K006, K016, K007, K017, K008, \
K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K027, K037, K028, \
K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056, K047, K057, K048, \
K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K076, \
K080, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K096, K097, \
K100, K110, K101, K113, K105, K115, K106, K116, K107, K117, K108 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \
{ K010, K011, K012, K013, K014, K015, K016, K017, ____ }, \
{ K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \
{ K030, K031, K032, K033, K034, K035, K036, K037, ____ }, \
{ K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \
{ K050, K051, K052, K053, K054, K055, K056, K057, ____ }, \
{ K060, K061, K062, K063, K064, K065, ____, ____, ____ }, \
{ K070, K071, K072, K073, K074, K075, K076, ____, ____ }, \
{ K080, K081, K082, K083, K084, K085, ____, ____, ____ }, \
{ ____, K091, K092, K093, K094, K095, K096, K097, ____ }, \
{ K100, K101, ____, ____, ____, K105, K106, K107, K108 }, \
{ K110, ____, ____, K113, ____, K115, K116, K117, ____ } \
}
#define LAYOUT_tkl_iso( \
K000, K010, K001, K011, K002, K012, K003, K013, K004, K014, K005, K015, K006, K016, K007, K017, K008, \
K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K027, K037, K028, \
K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K047, K057, K048, \
K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K066, K076, \
K080, K090, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K096, K097, \
K100, K110, K101, K113, K105, K115, K106, K116, K107, K117, K108 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \
{ K010, K011, K012, K013, K014, K015, K016, K017, ____ }, \
{ K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \
{ K030, K031, K032, K033, K034, K035, K036, K037, ____ }, \
{ K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \
{ K050, K051, K052, K053, K054, K055, ____, K057, ____ }, \
{ K060, K061, K062, K063, K064, K065, K066, ____, ____ }, \
{ K070, K071, K072, K073, K074, K075, K076, ____, ____ }, \
{ K080, K081, K082, K083, K084, K085, ____, ____, ____ }, \
{ K090, K091, K092, K093, K094, K095, K096, K097, ____ }, \
{ K100, K101, ____, ____, ____, K105, K106, K107, K108 }, \
{ K110, ____, ____, K113, ____, K115, K116, K117, ____ } \
}
#define LAYOUT_tkl_ansi_7u( \
K000, K010, K001, K011, K002, K012, K003, K013, K004, K014, K005, K015, K006, K016, K007, K017, K008, \
K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K027, K037, K028, \
K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056, K047, K057, K048, \
K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K076, \
K080, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K096, K097, \
K100, K110, K101, K113, K115, K106, K116, K107, K117, K108 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \
{ K010, K011, K012, K013, K014, K015, K016, K017, ____ }, \
{ K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \
{ K030, K031, K032, K033, K034, K035, K036, K037, ____ }, \
{ K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \
{ K050, K051, K052, K053, K054, K055, K056, K057, ____ }, \
{ K060, K061, K062, K063, K064, K065, ____, ____, ____ }, \
{ K070, K071, K072, K073, K074, K075, K076, ____, ____ }, \
{ K080, K081, K082, K083, K084, K085, ____, ____, ____ }, \
{ ____, K091, K092, K093, K094, K095, K096, K097, ____ }, \
{ K100, K101, ____, ____, ____, K105, K106, K107, K108 }, \
{ K110, ____, ____, K113, ____, K115, K116, K117, ____ } \
}
#define LAYOUT_tkl_iso_7u( \
K000, K010, K001, K011, K002, K012, K003, K013, K004, K014, K005, K015, K006, K016, K007, K017, K008, \
K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K027, K037, K028, \
K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K047, K057, K048, \
K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K066, K076, \
K080, K090, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K096, K097, \
K100, K110, K101, K113, K115, K106, K116, K107, K117, K108 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \
{ K010, K011, K012, K013, K014, K015, K016, K017, ____ }, \
{ K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \
{ K030, K031, K032, K033, K034, K035, K036, K037, ____ }, \
{ K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \
{ K050, K051, K052, K053, K054, K055, ____, K057, ____ }, \
{ K060, K061, K062, K063, K064, K065, K066, ____, ____ }, \
{ K070, K071, K072, K073, K074, K075, K076, ____, ____ }, \
{ K080, K081, K082, K083, K084, K085, ____, ____, ____ }, \
{ K090, K091, K092, K093, K094, K095, K096, K097, ____ }, \
{ K100, K101, ____, ____, ____, K105, K106, K107, K108 }, \
{ K110, ____, ____, K113, ____, K115, K116, K117, ____ } \
}

15
keyboards/aliceh66/pianoforte/readme.md Normal file
View File

@@ -0,0 +1,15 @@
# AliceH pianoforte solder PCB
QMK Firmware for the pianoforte solder PCB
* Keyboard Maintainer: [AliceH] (https://github.com/AliceH66)
* Hardware Supported: pianoforte Solder
Make example for this keyboard (after setting up your build environment):
make aliceh66/pianoforte:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Press and hold the reset button to enter bootloader mode.

24
keyboards/aliceh66/pianoforte/rules.mk Normal file
View File

@@ -0,0 +1,24 @@
# MCU name
MCU = atmega32u4
# Processor Frequency
F_CPU = 8000000
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
LTO_ENABLE = yes
LAYOUTS = tkl_ansi tkl_iso

26
keyboards/mode/m80v1/m80h/config.h → keyboards/aliceh66/pianoforte_hs/config.h
View File

@@ -1,5 +1,5 @@
/*
Copyright 2020 Alvaro "Gondolindrim" Volpato <gondolindrim@acheronproject.com>
Copyright 2022 AliceH
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -17,6 +17,24 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
/* USB Device descriptor parameter */
#define PRODUCT_ID 0x0081
#define DEVICE_VER 0x0072 //H for hotswap version
#define MATRIX_ROWS 12
#define MATRIX_COLS 9
#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, F6, F5, E6, D4 }
#define MATRIX_ROW_PINS { D2, D1, D3, D0, D5, B0, F0, F1, F7, F4, C7, C6 }
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
#define DYNAMIC_KEYMAP_LAYER_COUNT 2
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

110
keyboards/aliceh66/pianoforte_hs/info.json Normal file
View File

@@ -0,0 +1,110 @@
{
"keyboard_name": "pianoforte hotswap",
"manufacturer": "AliceH",
"url": "https://github.com/AliceH66",
"maintainer": "AliceH66",
"usb": {
"device_version": "1.0.0",
"pid": "0x7068",
"vid": "0x6168"
},
"layouts": {
"LAYOUT_tkl_ansi": {
"layout": [
{"label":"Esc", "x":0, "y":0},
{"label":"F1", "x":1.25, "y":0},
{"label":"F2", "x":2.25, "y":0},
{"label":"F3", "x":3.25, "y":0},
{"label":"F4", "x":4.25, "y":0},
{"label":"F5", "x":5.5, "y":0},
{"label":"F6", "x":6.5, "y":0},
{"label":"F7", "x":7.5, "y":0},
{"label":"F8", "x":8.5, "y":0},
{"label":"F9", "x":9.75, "y":0},
{"label":"F10", "x":10.75, "y":0},
{"label":"F11", "x":11.75, "y":0},
{"label":"F12", "x":12.75, "y":0},
{"label":"F13", "x":14, "y":0},
{"label":"PrtSc", "x":15.25, "y":0},
{"label":"Scroll Lock", "x":16.25, "y":0},
{"label":"Pause Break", "x":17.25, "y":0},
{"label":"`~", "x":0, "y":1.25},
{"label":"1!", "x":1, "y":1.25},
{"label":"2@", "x":2, "y":1.25},
{"label":"3#", "x":3, "y":1.25},
{"label":"4$", "x":4, "y":1.25},
{"label":"5%", "x":5, "y":1.25},
{"label":"6^", "x":6, "y":1.25},
{"label":"7&", "x":7, "y":1.25},
{"label":"8*", "x":8, "y":1.25},
{"label":"9(", "x":9, "y":1.25},
{"label":"0)", "x":10, "y":1.25},
{"label":"-_", "x":11, "y":1.25},
{"label":"=+", "x":12, "y":1.25},
{"label":"Backspace", "x":13, "y":1.25, "w":2},
{"label":"Insert", "x":15.25, "y":1.25},
{"label":"Home", "x":16.25, "y":1.25},
{"label":"PgUp", "x":17.25, "y":1.25},
{"label":"Tab", "x":0, "y":2.25, "w":1.5},
{"label":"Q", "x":1.5, "y":2.25},
{"label":"W", "x":2.5, "y":2.25},
{"label":"E", "x":3.5, "y":2.25},
{"label":"R", "x":4.5, "y":2.25},
{"label":"T", "x":5.5, "y":2.25},
{"label":"Y", "x":6.5, "y":2.25},
{"label":"U", "x":7.5, "y":2.25},
{"label":"I", "x":8.5, "y":2.25},
{"label":"O", "x":9.5, "y":2.25},
{"label":"P", "x":10.5, "y":2.25},
{"label":"[{", "x":11.5, "y":2.25},
{"label":"]}", "x":12.5, "y":2.25},
{"label":"Pipe", "x":13.5, "y":2.25, "w":1.5},
{"label":"Delete", "x":15.25, "y":2.25},
{"label":"End", "x":16.25, "y":2.25},
{"label":"PgDn", "x":17.25, "y":2.25},
{"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
{"label":"A", "x":1.75, "y":3.25},
{"label":"S", "x":2.75, "y":3.25},
{"label":"D", "x":3.75, "y":3.25},
{"label":"F", "x":4.75, "y":3.25},
{"label":"G", "x":5.75, "y":3.25},
{"label":"H", "x":6.75, "y":3.25},
{"label":"J", "x":7.75, "y":3.25},
{"label":"K", "x":8.75, "y":3.25},
{"label":"L", "x":9.75, "y":3.25},
{"label":";:", "x":10.75, "y":3.25},
{"label":"'\"", "x":11.75, "y":3.25},
{"label":"Enter", "x":12.75, "y":3.25, "w":2.25},
{"label":"Shift", "x":0, "y":4.25, "w":2.25},
{"label":"Z", "x":2.25, "y":4.25},
{"label":"X", "x":3.25, "y":4.25},
{"label":"C", "x":4.25, "y":4.25},
{"label":"V", "x":5.25, "y":4.25},
{"label":"B", "x":6.25, "y":4.25},
{"label":"N", "x":7.25, "y":4.25},
{"label":"M", "x":8.25, "y":4.25},
{"label":"<", "x":9.25, "y":4.25},
{"label":">", "x":10.25, "y":4.25},
{"label":"?", "x":11.25, "y":4.25},
{"label":"Shift", "x":12.25, "y":4.25, "w":2.75},
{"label":"\u2191", "x":16.25, "y":4.25},
{"label":"Ctrl", "x":0, "y":5.25, "w":1.25},
{"label":"Win", "x":1.25, "y":5.25, "w":1.25},
{"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
{"label":"Space", "x":4, "y":5.25, "w":6.25},
{"label":"Alt", "x":10, "y":5.25, "w":1.25},
{"label":"Win", "x":11.25, "y":5.25, "w":1.25},
{"label":"MO(1)", "x":12.5, "y":5.25, "w":1.25},
{"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25},
{"label":"\u2190", "x":15.25, "y":5.25},
{"label":"\u2193", "x":16.25, "y":5.25},
{"label":"\u2192", "x":17.25, "y":5.25}
]
}
}
}

33
keyboards/aliceh66/pianoforte_hs/keymaps/default/keymap.c Normal file
View File

@@ -0,0 +1,33 @@
/*
Copyright 2022 AliceH <hayasakakb@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum layer_names {
_LAYER0,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LAYER0] = LAYOUT_tkl_ansi(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
)
};

43
keyboards/aliceh66/pianoforte_hs/keymaps/via/keymap.c Normal file
View File

@@ -0,0 +1,43 @@
/*
Copyright 2022 AliceH <hayasakakb@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum layer_names {
_LAYER0,
_LAYER1
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LAYER0] = LAYOUT_tkl_ansi(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[_LAYER1] = LAYOUT_tkl_ansi(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};

1
keyboards/aliceh66/pianoforte_hs/keymaps/via/rules.mk Normal file
View File

@@ -0,0 +1 @@
VIA_ENABLE = yes

8
keyboards/studiokestra/galatea/rev1/config.h → keyboards/aliceh66/pianoforte_hs/pianoforte_hs.c
View File

@@ -1,5 +1,5 @@
/*
Copyright 2021 Studio Kestra
Copyright 2022 AliceH
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -14,8 +14,4 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define PRODUCT_ID 0x8801
#define DEVICE_VER 0x0001
#include "pianoforte_hs.h"

43
keyboards/aliceh66/pianoforte_hs/pianoforte_hs.h Normal file
View File

@@ -0,0 +1,43 @@
/*
Copyright 2022 AliceH
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define ____ KC_NO
#define LAYOUT_tkl_ansi( \
K000, K010, K001, K011, K002, K012, K003, K013, K004, K014, K005, K015, K006, K016, K007, K017, K008, \
K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K027, K037, K028, \
K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056, K047, K057, K048, \
K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K066, \
K080, K090, K081, K091, K082, K092, K083, K093, K084, K094, K085, K096, K087, \
K100, K110, K101, K112, K104, K115, K106, K116, K107, K117, K108 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \
{ K010, K011, K012, K013, K014, K015, K016, K017, ____ }, \
{ K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \
{ K030, K031, K032, K033, K034, K035, K036, K037, ____ }, \
{ K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \
{ K050, K051, K052, K053, K054, K055, K056, K057, ____ }, \
{ K060, K061, K062, K063, K064, K065, K066, ____, ____ }, \
{ K070, K071, K072, K073, K074, K075, ____, ____, ____ }, \
{ K080, K081, K082, K083, K084, K085, ____, K087, ____ }, \
{ K090, K091, K092, K093, K094, ____, K096, ____, ____ }, \
{ K100, K101, ____, ____, K104, ____, K106, K107, K108 }, \
{ K110, ____, K112, ____, ____, K115, K116, K117, ____ } \
}

15
keyboards/aliceh66/pianoforte_hs/readme.md Normal file
View File

@@ -0,0 +1,15 @@
# AliceH pianoforte hotswap PCB
QMK Firmware for the pianoforte hotswap PCB
* Keyboard Maintainer: [AliceH] (https://github.com/AliceH66)
* Hardware Supported: pianoforte hotswap
Make example for this keyboard (after setting up your build environment):
make aliceh66/pianoforte_hs:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Press and hold the reset button to enter bootloader mode.

22
keyboards/aliceh66/pianoforte_hs/rules.mk Normal file
View File

@@ -0,0 +1,22 @@
# MCU name
MCU = atmega32u4
# Processor Frequency
F_CPU = 8000000
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
LTO_ENABLE = yes

2
keyboards/alt34/readme.md
View File

@@ -24,7 +24,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset jumper**: Briefly short the pads just below the TRRS connector on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Latest updates and information for alt34 is found at https://gitlab.com/altosys/alt34

2
keyboards/amjkeyboard/amj84/readme.md
View File

@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/ano/readme.md
View File

@@ -17,4 +17,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* Physical reset button: Briefly press the button on the back of the PCB - or short reset and ground pins
* Keycode in layout: Press the key mapped to `RESET`. By default this is done by pressing RALT to access second layer and pressing rotary encoder down.
* Keycode in layout: Press the key mapped to `QK_BOOT`. By default this is done by pressing RALT to access second layer and pressing rotary encoder down.

2
keyboards/atlantis/ak81_ve/readme.md
View File

@@ -17,7 +17,7 @@ Make example for this keyboard (after setting up your build environment):
Enter the bootloader in 2 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
* **Physical reset pins**: Briefly short the reset pins using tweezers, a paperclip, or any other conductive material.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

2
keyboards/atlas_65/readme.md
View File

@@ -23,4 +23,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/atreyu/readme.md
View File

@@ -22,7 +22,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
## More information

2
keyboards/atset/at1/readme.md
View File

@@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/atset/at12/readme.md
View File

@@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/atset/at16/readme.md
View File

@@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/atset/at3/readme.md
View File

@@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/atset/at6/readme.md
View File

@@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/atset/at9/readme.md
View File

@@ -21,4 +21,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/aves60/readme.md
View File

@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the space bar and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/axolstudio/foundation_gamma/readme.md
View File

@@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
* **Physical reset button**: Briefly press the button labeled "SW1" on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/axolstudio/yeti/hotswap/readme.md
View File

@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/axolstudio/yeti/soldered/readme.md
View File

@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/bacca70/readme.md
View File

@@ -14,7 +14,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the top left key (Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB. The button is next to the MCU.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available. For the default keymap it is on the right alt key on the second layer.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. For the default keymap it is on the right alt key on the second layer.
## Make example for this keyboard (after setting up your build environment):

2
keyboards/bajjak/readme.md
View File

@@ -18,6 +18,6 @@ Flashing example for this keyboard:
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

2
keyboards/bbrfkr/dynamis/readme.md
View File

@@ -14,7 +14,7 @@ Gasket mounted 65% row staggered keyboard integrated a trackball
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
## build and flash firmware

4
keyboards/bioi/f60/readme.md
View File

@@ -21,5 +21,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
## Bootloader
* **Bootmagic reset**: Hold down the top left key (ESC) and plug in the keyboard
* **Physical reset button**: Short the two small pads labeled "RESET" the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Physical reset button**: Short the two small pads labeled "QK_BOOT" the back of the PCB
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/blank/blank01/readme.md
View File

@@ -23,4 +23,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/blaster75/readme.md
View File

@@ -18,7 +18,7 @@ We strongly recommend this method. If the PCB is not soldered with switches at t
to short the (0,0) position key ("ESC" in our PCB) while plugging the USB in.
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Make example for this keyboard (after setting up your build environment):

2
keyboards/blockboy/ac980mini/readme.md
View File

@@ -26,4 +26,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

4
keyboards/bobpad/readme.md
View File

@@ -19,7 +19,7 @@ Flashing example for this keyboard:
## Bootloader
Enter the bootloader in 3 ways:
* **Physical reset button**: Briefly short the pad connected to RESET and GND on the back
* **Keycode in layout**: Press the key mapped to `RESET`, this is the recommened method
* **Physical reset button**: Briefly short the pad connected to QK_BOOT and GND on the back
* **Keycode in layout**: Press the key mapped to `QK_BOOT`, this is the recommened method
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

2
keyboards/bpiphany/ghost_squid/readme.md
View File

@@ -12,7 +12,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Make example for this keyboard (after setting up your build environment):

2
keyboards/cablecardesigns/cypher/rev6/readme.md
View File

@@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: There are 2 holes underneath the spacebar position that if shorted will enter bootloader
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/cannonkeys/brutalv2_65/readme.md
View File

@@ -17,4 +17,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/cannonkeys/cloudline/readme.md
View File

@@ -17,4 +17,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/cannonkeys/crin/readme.md
View File

@@ -15,4 +15,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/cannonkeys/gentoo/readme.md
View File

@@ -17,4 +17,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/cannonkeys/gentoo_hs/readme.md
View File

@@ -17,4 +17,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/cannonkeys/hoodrowg/readme.md
View File

@@ -15,7 +15,7 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

2
keyboards/cantor/readme.md
View File

@@ -27,4 +27,4 @@ Enter the bootloader in 3 ways:
* Press and hold the BOOT0 button.
* Press and release the NRST button.
* Release the BOOT0 button.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/chalice/readme.md
View File

@@ -20,6 +20,6 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down Escape and plug in the keyboard.
* **Physical reset button**: Briefly press the reset button below the pro-micro.
* **Keycode in layout**: The `RESET` key can be found by holding `FUNC` in between the space bars and pressing `ESC`.
* **Keycode in layout**: The `QK_BOOT` key can be found by holding `FUNC` in between the space bars and pressing `ESC`.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

2
keyboards/chaos65/readme.md
View File

@@ -22,4 +22,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
* **Physical reset button**: Briefly press the button labeled "Reset" on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/charue/charon/readme.md
View File

@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/charue/sunsetter_r2/readme.md
View File

@@ -28,4 +28,4 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/cipulot/kallos/readme.md
View File

@@ -18,4 +18,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
* **Physical reset button**: Briefly short the pads labeled "Reset" on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/cipulot/kawayo/readme.md
View File

@@ -26,4 +26,4 @@ Enter the bootloader in 2 ways:
* **Physical reset button**: Power up the board while having the `Reset/Boot0` pad shorted.
* **Keycode in layout**: Press the `GRV` key on layer 1 which is mapped to `RESET`
* **Keycode in layout**: Press the `GRV` key on layer 1 which is mapped to `QK_BOOT`

4
keyboards/ckeys/handwire_101/readme.md
View File

@@ -139,7 +139,7 @@ This layer is not currently working but has been left as an example of how to wr
```
/* ADMIN
* ,-----------------------------------------.
* | RESET | | | X |
* | QK_BOOT | | | X |
* |------------+-----+-----------+----------|
* |ABOUT CKEYS | | | |
* |------------+-----+-----------+----------|
@@ -150,7 +150,7 @@ This layer is not currently working but has been left as an example of how to wr
*/
```
The most important key in this layer is the `RESET` switch. Use it to flash new firmware. It does the same thing as the hardware button on the Proton C. But since you soldered the Proton C with the reset button facing towards the keys, the only way to reach it is to de-solder wires. The reset switch solves this. Program a reset switch into all of your future keyboards.
The most important key in this layer is the `QK_BOOT` switch. Use it to flash new firmware. It does the same thing as the hardware button on the Proton C. But since you soldered the Proton C with the reset button facing towards the keys, the only way to reach it is to de-solder wires. The reset switch solves this. Program a reset switch into all of your future keyboards.
The `ABOUT CKEYS` is another example of using a macro. It will type out a few sentences about cKeys.

4
keyboards/coarse/ixora/readme.md
View File

@@ -18,5 +18,5 @@ See [build environment setup](https://docs.qmk.fm/build_environment_setup.html)
#### Developer's Note
STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `RESET` keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `RESET` keycode).
STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `QK_BOOT` keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `QK_BOOT` keycode).

4
keyboards/coarse/vinta/readme.md
View File

@@ -18,5 +18,5 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
#### Developer's Note
STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `RESET` keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `RESET` keycode).
STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `QK_BOOT` keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `QK_BOOT` keycode).

2
keyboards/contender/readme.md
View File

@@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

1
keyboards/converter/periboard_512/info.json
View File

@@ -13,7 +13,6 @@
"cols": ["B7", "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7", "E0", "E1", "C0", "C1", "C2", "C3", "C4", "C5", "C6", "C7"],
"rows": ["B6", "B5", "B4", "B3", "B2", "B1", "B0", "E7"]
},
"url": "",
"layouts": {
"LAYOUT": {
"layout": [

2
keyboards/cradio/readme.md
View File

@@ -30,7 +30,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 3 ways:
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured.
* **Physical reset button**: Briefly press the reset button soldered on the PCB.
* **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side.

4
keyboards/creatkeebs/glacier/readme.md
View File

@@ -16,8 +16,8 @@ A 80% keyboard
Enter the bootloader in 2 ways:
* Physical reset button: Press the `RESET` button on the back of the PCB.
* Keycode in layout: Press the key mapped to `RESET` if it is available.
* Physical reset button: Press the `QK_BOOT` button on the back of the PCB.
* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available.
### Building the Firmware
Make example for this keyboard (after setting up your build environment):

4
keyboards/creatkeebs/thera/readme.md
View File

@@ -18,8 +18,8 @@ A 75% keyboard
Enter the bootloader in 2 ways:
* Physical reset button: Press the `RESET` button on the back of the PCB.
* Keycode in layout: Press the key mapped to `RESET` if it is available.
* Physical reset button: Press the `QK_BOOT` button on the back of the PCB.
* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available.
### Building the Firmware
Make example for this keyboard (after setting up your build environment):

2
keyboards/crin/readme.md
View File

@@ -17,7 +17,7 @@ Flashing example for this keyboard:
To reset the board into bootloader mode, do one of the following:
* Hold Esc while plugging the PCB in, if Bootmagic Lite is enabled (also erases persistent settings).
* Press the RESET keycode, if programmed on the keymap (Fn+R by default).
* Press the `QK_BOOT` keycode, if programmed on the keymap (Fn+R by default).
* Slide the switch just below the reset button to the left and press the reset button.
* Please note that you must slide it back to the right for the PCB to boot QMK again.

66
keyboards/crkbd/keymaps/joe_scotto/config.h Normal file
View File

@@ -0,0 +1,66 @@
/*
Copyright 2022 Joe Scotto
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_COLS 6
#define MATRIX_ROW_PINS \
{ D4, C6, D7, E6 }
// wiring of each half
#define MATRIX_COL_PINS \
{ F4, F5, F6, F7, B1, B3 }
// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
#define USE_SERIAL
#define TAPPING_TERM 50

46
keyboards/crkbd/keymaps/joe_scotto/keymap.c Normal file
View File

@@ -0,0 +1,46 @@
/*
Copyright 2022 Joe Scotto
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_split_3x6_3(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
KC_ENT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
LSFT_T(KC_ESC), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
KC_LALT, KC_LGUI, KC_SPC, MO(1), MO(2), KC_LCTL
),
[1] = LAYOUT_split_3x6_3(
KC_GRV, KC_UNDS, KC_MINS, KC_PLUS, KC_EQL, KC_NO, KC_NO, KC_MRWD, KC_MPLY, KC_MFFD, KC_NO, KC_DEL,
KC_ENT, KC_LCBR, KC_LPRN, KC_RPRN, KC_RCBR, KC_BSLS, KC_NO, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, KC_CAPS,
LSFT_T(KC_ESC), KC_LBRC, KC_QUOT, KC_DQUO, KC_RBRC, KC_NO, KC_NO, KC_VOLD, KC_MUTE, KC_VOLU, KC_NO, KC_RSFT,
KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_NO, KC_LCTL
),
[2] = LAYOUT_split_3x6_3(
KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
KC_ENT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_CAPS,
LSFT_T(KC_ESC), KC_NO, KC_NO, KC_NO, KC_NO, MO(3), KC_NO, KC_NO, KC_COMM, KC_DOT, KC_NO, KC_RSFT,
KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_NO, KC_LCTL
),
[3] = LAYOUT_split_3x6_3(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
QK_BOOT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LGUI,
LSFT_T(KC_ESC), KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT,
KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_NO, KC_LCTL
)
};

2
keyboards/dailycraft/bat43/readme.md
View File

@@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/dailycraft/claw44/readme.md
View File

@@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/dailycraft/owl8/readme.md
View File

@@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/dailycraft/sandbox/readme.md
View File

@@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/dailycraft/stickey4/readme.md
View File

@@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

2
keyboards/dailycraft/wings42/readme.md
View File

@@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

Some files were not shown because too many files have changed in this diff Show More