Update keyboard tracking references

docs/newbs_getting_started.md

@@ -60,12 +60,9 @@ After Homebrew is installed run this command:
 
 You will need to install Git and Python. It's very likely that you already have both, but if not, one of the following commands should install them:
 
-* Debian / Ubuntu / Devuan: `sudo apt install -y git python3-pip`
-* Fedora / Red Hat / CentOS: `sudo yum -y install git python3-pip`
-* Arch / Manjaro: `sudo pacman --needed --noconfirm -S git python-pip libffi`
-* Void: `sudo xbps-install -y git python3-pip`
-* Solus: `sudo eopkg -y install git python3`
-* Sabayon: `sudo equo install dev-vcs/git dev-python/pip`
+* Debian / Ubuntu / Devuan: `sudo apt install git python3 python3-pip`
+* Fedora / Red Hat / CentOS: `sudo yum install git python3 python3-pip`
+* Arch / Manjaro: `sudo pacman -S git python python-pip python-setuptools libffi`
 
 Install the global CLI to bootstrap your system:
 

drivers/ugfx/gdisp/st7565/board_st7565_template.h

@@ -8,9 +8,8 @@
 #ifndef _GDISP_LLD_BOARD_H
 #define _GDISP_LLD_BOARD_H
 
-#include "quantum.h"
-
-#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
+#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9  // actually 6
+#define ST7565_ADC ST7565_ADC_NORMAL
 #define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
 #define ST7565_PAGE_ORDER 0, 1, 2, 3
 /*
@@ -18,12 +17,19 @@
  * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
  */
 
-#define ST7565_A0_PIN C7
-#define ST7565_RST_PIN C8
-#define ST7565_MOSI_PIN C6
-#define ST7565_SCLK_PIN C5
-#define ST7565_SS_PIN C4
+#define ST7565_GPIOPORT GPIOC
+#define ST7565_PORT PORTC
+#define ST7565_A0_PIN 7
+#define ST7565_RST_PIN 8
+#define ST7565_MOSI_PIN 6
+#define ST7565_SLCK_PIN 5
+#define ST7565_SS_PIN 4
 
+#define palSetPadModeRaw(portname, bits) ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+
+#define palSetPadModeNamed(portname, portmode) palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+
+#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
 // DSPI Clock and Transfer Attributes
 // Frame Size: 8 bits
 // MSB First
@@ -32,9 +38,9 @@ static const SPIConfig spi1config = {
     // Operation complete callback or @p NULL.
     .end_cb = NULL,
     // The chip select line port - when not using pcs.
-    .ssport = PAL_PORT(ST7565_SS_PIN),
+    .ssport = ST7565_GPIOPORT,
     // brief The chip select line pad number - when not using pcs.
-    .sspad = PAL_PAD(ST7565_SS_PIN),
+    .sspad = ST7565_SS_PIN,
     // SPI initialization data.
     .tar0 = SPIx_CTARn_FMSZ(7)     // Frame size = 8 bytes
             | SPIx_CTARn_ASC(1)    // After SCK Delay Scaler (min 50 ns) = 55.56ns
@@ -60,14 +66,13 @@ static GFXINLINE void release_bus(GDisplay *g) {
 
 static GFXINLINE void init_board(GDisplay *g) {
     (void)g;
-    setPinOutput(ST7565_A0_PIN);
-    writePinHigh(ST7565_A0_PIN);
-    setPinOutput(ST7565_RST_PIN);
-    writePinHigh(ST7565_RST_PIN);
-    setPinOutput(ST7565_SS_PIN);
-
-    palSetPadMode(PAL_PORT(ST7565_MOSI_PIN), PAL_PAD(ST7565_MOSI_PIN), PAL_MODE_ALTERNATIVE_2);
-    palSetPadMode(PAL_PORT(ST7565_SCLK_PIN), PAL_PAD(ST7565_SCLK_PIN), PAL_MODE_ALTERNATIVE_2);
+    palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+    palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
+    palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
+    palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
 
     spiInit();
     spiStart(&SPID1, &spi1config);
@@ -78,18 +83,19 @@ static GFXINLINE void post_init_board(GDisplay *g) { (void)g; }
 
 static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
     (void)g;
-    writePin(ST7565_RST_PIN, !state);
+    if (state) {
+        palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    } else {
+        palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
 }
 
-static GFXINLINE void write_cmd(GDisplay *g, gU8 cmd) {
-    (void)g;
-    writePinLow(ST7565_A0_PIN);
-    spiSend(&SPID1, 1, &cmd);
-}
+static GFXINLINE void enter_data_mode(GDisplay *g) { palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); }
 
-static GFXINLINE void write_data(GDisplay *g, gU8 *data, gU16 length) {
+static GFXINLINE void enter_cmd_mode(GDisplay *g) { palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); }
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t *data, uint16_t length) {
     (void)g;
-    writePinHigh(ST7565_A0_PIN);
     spiSend(&SPID1, length, data);
 }
 

drivers/ugfx/gdisp/st7565/driver.mk

@@ -1,3 +1,3 @@
 GFXINC += drivers/ugfx/gdisp/st7565
 GFXSRC += drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
-GDISP_DRIVER_LIST += GDISPVMT_ST7565_QMK
+GDISP_DRIVER_LIST += GDISPVMT_ST7565_QMK

drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c

@@ -49,15 +49,31 @@
 #        define ST7565_COM_SCAN ST7565_COM_SCAN_INC
 #    endif
 #    ifndef ST7565_PAGE_ORDER
-#        define ST7565_PAGE_ORDER 0, 1, 2, 3, 4, 5, 6, 7
+#        define ST7565_PAGE_ORDER 0, 1, 2, 3
 #    endif
 
 /*===========================================================================*/
 /* Driver local functions.                                                   */
 /*===========================================================================*/
 
+typedef struct {
+    bool_t  buffer2;
+    uint8_t data_pos;
+    uint8_t data[16];
+    uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
+} PrivData;
+
 // Some common routines and macros
-#    define RAM(g) ((gU8 *)g->priv)
+#    define PRIV(g) ((PrivData *)g->priv)
+#    define RAM(g) (PRIV(g)->ram)
+
+static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) { PRIV(g)->data[PRIV(g)->data_pos++] = cmd; }
+
+static GFXINLINE void flush_cmd(GDisplay *g) {
+    write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
+    PRIV(g)->data_pos = 0;
+}
+
 #    define write_cmd2(g, cmd1, cmd2) \
         {                             \
             write_cmd(g, cmd1);       \
@@ -90,10 +106,9 @@
 
 LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     // The private area is the display surface.
-    g->priv = gfxAlloc(GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8);
-    if (!g->priv) {
-        return gFalse;
-    }
+    g->priv           = gfxAlloc(sizeof(PrivData));
+    PRIV(g)->buffer2  = false;
+    PRIV(g)->data_pos = 0;
 
     // Initialise the board interface
     init_board(g);
@@ -104,33 +119,25 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     setpin_reset(g, FALSE);
     gfxSleepMilliseconds(20);
     acquire_bus(g);
+    enter_cmd_mode(g);
 
+    write_cmd(g, ST7565_RESET);
     write_cmd(g, ST7565_LCD_BIAS);
     write_cmd(g, ST7565_ADC);
     write_cmd(g, ST7565_COM_SCAN);
 
-    write_cmd(g, ST7565_START_LINE | 0);
-
-    write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST * 64 / 101);
     write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
+    write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST);
 
-    // turn on voltage converter (VC=1, VR=0, VF=0)
-    write_cmd(g, ST7565_POWER_CONTROL | 0x04);
-    delay_ms(50);
-
-    // turn on voltage regulator (VC=1, VR=1, VF=0)
-    write_cmd(g, ST7565_POWER_CONTROL | 0x06);
-    delay_ms(50);
-
-    // turn on voltage follower (VC=1, VR=1, VF=1)
+    // turn on internal power supply (VC=1, VR=1, VF=1)
     write_cmd(g, ST7565_POWER_CONTROL | 0x07);
-    delay_ms(50);
 
-    write_cmd(g, ST7565_DISPLAY_ON);
+    write_cmd(g, ST7565_INVERT_DISPLAY);
     write_cmd(g, ST7565_ALLON_NORMAL);
-    write_cmd(g, ST7565_INVERT_DISPLAY);  // Disable Inversion of display.
 
+    write_cmd(g, ST7565_START_LINE | 0);
     write_cmd(g, ST7565_RMW);
+    flush_cmd(g);
 
     // Finish Init
     post_init_board(g);
@@ -156,14 +163,22 @@ LLDSPEC void gdisp_lld_flush(GDisplay *g) {
     if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return;
 
     acquire_bus(g);
-    gU8 pagemap[] = {ST7565_PAGE_ORDER};
-    for (p = 0; p < sizeof(pagemap); p++) {
-        write_cmd(g, ST7565_PAGE | pagemap[p]);
+    enter_cmd_mode(g);
+    unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
+    for (p = 0; p < 4; p++) {
+        write_cmd(g, ST7565_PAGE | (p + dstOffset));
         write_cmd(g, ST7565_COLUMN_MSB | 0);
         write_cmd(g, ST7565_COLUMN_LSB | 0);
         write_cmd(g, ST7565_RMW);
+        flush_cmd(g);
+        enter_data_mode(g);
         write_data(g, RAM(g) + (p * GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
+        enter_cmd_mode(g);
     }
+    unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
+    write_cmd(g, ST7565_START_LINE | line);
+    flush_cmd(g);
+    PRIV(g)->buffer2 = !PRIV(g)->buffer2;
     release_bus(g);
 
     g->flags &= ~GDISP_FLG_NEEDFLUSH;
@@ -228,7 +243,6 @@ LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
 }
 #    endif
 
-#    if GDISP_HARDWARE_BITFILLS
 LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
     uint8_t *buffer     = (uint8_t *)g->p.ptr;
     int      linelength = g->p.cx;
@@ -254,7 +268,6 @@ LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
     }
     g->flags |= GDISP_FLG_NEEDFLUSH;
 }
-#    endif
 
 #    if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
 LLDSPEC void gdisp_lld_control(GDisplay *g) {
@@ -266,12 +279,16 @@ LLDSPEC void gdisp_lld_control(GDisplay *g) {
                 case powerSleep:
                 case powerDeepSleep:
                     acquire_bus(g);
+                    enter_cmd_mode(g);
                     write_cmd(g, ST7565_DISPLAY_OFF);
+                    flush_cmd(g);
                     release_bus(g);
                     break;
                 case powerOn:
                     acquire_bus(g);
+                    enter_cmd_mode(g);
                     write_cmd(g, ST7565_DISPLAY_ON);
+                    flush_cmd(g);
                     release_bus(g);
                     break;
                 default:
@@ -301,11 +318,12 @@ LLDSPEC void gdisp_lld_control(GDisplay *g) {
             return;
 
         case GDISP_CONTROL_CONTRAST:
-            if ((unsigned)g->p.ptr > 100) g->p.ptr = (void *)100;
+            g->g.Contrast = (unsigned)g->p.ptr & 63;
             acquire_bus(g);
-            write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr) << 6) / 101) & 0x3F);
+            enter_cmd_mode(g);
+            write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
+            flush_cmd(g);
             release_bus(g);
-            g->g.Contrast = (unsigned)g->p.ptr;
             return;
     }
 }

keyboards/boardrun/bizarre/bizarre.c

@@ -1,16 +0,0 @@
-/*
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "bizarre.h"

keyboards/boardrun/bizarre/bizarre.h

@@ -1,78 +0,0 @@
-/*
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT_all( \
-  k11,  k12, k117, k13, k14, k15, k16, k17,           k18, k19, k110, k111, k112, k113, k114, k115, k116, \
-  k21,      k22,   k23, k24, k25, k26, k27,           k28, k29, k210, k211, k212, k213, k214,   k215,  \
-           k32,    k33, k34, k35, k36, k37,           k38, k39, k310, k311, k312, k313, k314, k315,      \
-         k41, k42, k43, k44, k45, k46, k47, k57, k58, k48, k49, k410, k411, k412,      k413,    k415, \
-           k52,                   k55,    k56,        k59,                   k512,        k514, k515, k516 \
-) \
-{ \
-  { k11,   k12, k13,   k14,   k15, k16, k17, k18, k19, k110,  k111,  k112, k113,  k114,  k115, k116,  k117 }, \
-  { k21,   k22, k23,   k24,   k25, k26, k27, k28, k29, k210,  k211,  k212, k213,  k214,  k215, KC_NO, KC_NO }, \
-  { KC_NO, k32, k33,   k34,   k35, k36, k37, k38, k39, k310,  k311,  k312, k313,  k314,  k315, KC_NO, KC_NO }, \
-  { k41,   k42, k43,   k44,   k45, k46, k47, k48, k49, k410,  k411,  k412, k413,  KC_NO, k415, KC_NO, KC_NO }, \
-  { KC_NO, k52, KC_NO, KC_NO, k55, k56, k57, k58, k59, KC_NO, KC_NO, k512, KC_NO, k514,  k515, k516,  KC_NO } \
-}
-
-#define LAYOUT_ansi( \
-  k11,  k12, k117, k13, k14, k15, k16, k17,           k18, k19, k110, k111, k112, k113, k114, k115,   \
-  k21,      k22,   k23, k24, k25, k26, k27,           k28, k29, k210, k211, k212, k213, k214,   k215,  \
-           k32,    k33, k34, k35, k36, k37,           k38, k39, k310, k311, k312, k313,     k315,      \
-         k41,      k43, k44, k45, k46, k47, k57, k58, k48, k49, k410, k411, k412,     k413,     k415, \
-           k52,                   k55,    k56,        k59,                   k512,        k514, k515, k516 \
-) \
-{ \
-  { k11,   k12,   k13,   k14,   k15, k16, k17, k18, k19, k110,  k111,  k112, k113,  k114,  k115, KC_NO,  k117 }, \
-  { k21,   k22,   k23,   k24,   k25, k26, k27, k28, k29, k210,  k211,  k212, k213,  k214,  k215, KC_NO, KC_NO }, \
-  { KC_NO, k32,   k33,   k34,   k35, k36, k37, k38, k39, k310,  k311,  k312, k313,  KC_NO, k315, KC_NO, KC_NO }, \
-  { k41,   KC_NO, k43,   k44,   k45, k46, k47, k48, k49, k410,  k411,  k412, k413,  KC_NO, k415, KC_NO, KC_NO }, \
-  { KC_NO, k52,   KC_NO, KC_NO, k55, k56, k57, k58, k59, KC_NO, KC_NO, k512, KC_NO, k514,  k515, k516, KC_NO } \
-}
-
-#define LAYOUT_split_bs( \
-  k11,  k12, k117, k13, k14, k15, k16, k17,           k18, k19, k110, k111, k112, k113, k114, k115, k116,   \
-  k21,      k22,   k23, k24, k25, k26, k27,           k28, k29, k210, k211, k212, k213, k214,   k215,  \
-           k32,    k33, k34, k35, k36, k37,           k38, k39, k310, k311, k312, k313,     k315,      \
-         k41,      k43, k44, k45, k46, k47, k57, k58, k48, k49, k410, k411, k412,     k413,     k415, \
-           k52,                   k55,    k56,        k59,                   k512,        k514, k515, k516 \
-) \
-{ \
-  { k11,   k12,   k13,   k14,   k15, k16, k17, k18, k19, k110,  k111,  k112, k113,  k114,  k115, k116,  k117 }, \
-  { k21,   k22,   k23,   k24,   k25, k26, k27, k28, k29, k210,  k211,  k212, k213,  k214,  k215, KC_NO, KC_NO }, \
-  { KC_NO, k32,   k33,   k34,   k35, k36, k37, k38, k39, k310,  k311,  k312, k313,  KC_NO, k315, KC_NO, KC_NO }, \
-  { k41,   KC_NO, k43,   k44,   k45, k46, k47, k48, k49, k410,  k411,  k412, k413,  KC_NO, k415, KC_NO, KC_NO }, \
-  { KC_NO, k52,   KC_NO, KC_NO, k55, k56, k57, k58, k59, KC_NO, KC_NO, k512, KC_NO, k514,  k515, k516, KC_NO } \
-}
-
-#define LAYOUT_iso( \
-  k11,  k12, k117, k13, k14, k15, k16, k17,           k18, k19, k110, k111, k112, k113, k114,   k115,    \
-  k21,      k22,   k23, k24, k25, k26, k27,           k28, k29, k210, k211, k212, k213, k214,          \
-           k32,    k33, k34, k35, k36, k37,           k38, k39, k310, k311, k312, k313, k314, k315,    \
-         k41, k42, k43, k44, k45, k46, k47, k57, k58, k48, k49, k410, k411, k412,     k413,     k415, \
-           k52,                   k55,    k56,        k59,                   k512,        k514, k515, k516 \
-) \
-{ \
-  { k11,   k12, k13,   k14,   k15, k16, k17, k18, k19, k110,  k111,  k112, k113,  k114,  k115,  KC_NO,  k117 }, \
-  { k21,   k22, k23,   k24,   k25, k26, k27, k28, k29, k210,  k211,  k212, k213,  k214,  KC_NO, KC_NO, KC_NO }, \
-  { KC_NO, k32, k33,   k34,   k35, k36, k37, k38, k39, k310,  k311,  k312, k313,  k314,  k315,  KC_NO, KC_NO }, \
-  { k41,   k42, k43,   k44,   k45, k46, k47, k48, k49, k410,  k411,  k412, k413,  KC_NO, k415,  KC_NO, KC_NO }, \
-  { KC_NO, k52, KC_NO, KC_NO, k55, k56, k57, k58, k59, KC_NO, KC_NO, k512, KC_NO, k514,  k515,  k516,  KC_NO } \
-}

keyboards/boardrun/bizarre/config.h

@@ -1,83 +0,0 @@
-/*
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xCDCD
-#define PRODUCT_ID      0x5339
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    shensmobile
-#define PRODUCT         Boardrun Bizarre
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 17
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
-#define MATRIX_COL_PINS { F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0, B3, B2, B1 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN F5
-// #define BACKLIGHT_LEVELS 6
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 10
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-// ws2812 options
-#define RGB_DI_PIN B7 // pin the DI on the ws2812 is hooked-up to
-#define RGBLIGHT_ANIMATIONS // run RGB animations
-#define RGBLED_NUM 15 // number of LEDs
-#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
-#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
-#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)

keyboards/boardrun/bizarre/info.json

@@ -1,397 +0,0 @@
-{
-    "keyboard_name": "Boardrun Bizarre",
-    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/boardrun/bizarre",
-    "maintainer": "QMK Community",
-    "manufacturer": "shensmobile",
-    "width": 21,
-    "height": 5,
-    "layouts": {
-        "LAYOUT_all": {
-            "layout": [
-                {"y":0, "x":0,    "label":"Home"},   
-                
-                {"y":0, "x":1.5,  "label":"Esc"},    
-                {"y":0, "x":2.5,  "label":"`"},      
-                {"y":0, "x":3.5,  "label":"1"}, 
-                
-                {"y":0, "x":4.75, "label":"2"},          
-                {"y":0, "x":5.75, "label":"3"},        
-                {"y":0, "x":6.75, "label":"4"},
-                {"y":0, "x":7.75, "label":"5"},        
-                
-                {"y":0, "x":11.25,"label":"6"},
-                {"y":0, "x":12.25,"label":"7"},
-                {"y":0, "x":13.25,"label":"8"},
-                {"y":0, "x":14.25,"label":"9"},
-                
-                {"y":0, "x":15.5, "label":"0"},
-                {"y":0, "x":16.5, "label":"-"},
-                {"y":0, "x":17.5, "label":"="},
-                {"y":0, "x":18.5, "label":"Backspace"},
-                {"y":0, "x":19.5, "label":"Bksp (Split)"},
-                
-                
-                {"y":1, "x":0,    "label":"End"},  
-                
-                {"y":1, "x":1.75, "label":"Tab", "w":1.5},  
-                {"y":1, "x":3.25, "label":"Q"},  
-                    
-                {"y":1, "x":4.75, "label":"W"},          
-                {"y":1, "x":5.75, "label":"E"},        
-                {"y":1, "x":6.75, "label":"R"},
-                {"y":1, "x":7.75, "label":"T"},
-                
-                {"y":1, "x":11.25,"label":"Y"},
-                {"y":1, "x":12.25,"label":"U"},
-                {"y":1, "x":13.25,"label":"I"},
-                {"y":1, "x":14.25,"label":"O"},
-                
-                {"y":1, "x":15.75,"label":"P"},
-                {"y":1, "x":16.75,"label":"["},
-                {"y":1, "x":17.75,"label":"]"},
-                {"y":1, "x":18.75,"label":"\\| (ANSI)", "w":1.5},
-                
-                
-                {"y":2, "x":1.25, "label":"Caps Lock", "w":1.75},
-                {"y":2, "x":3,    "label":"A"},
-                
-                {"y":2, "x":4.75, "label":"S"},          
-                {"y":2, "x":5.75, "label":"D"},        
-                {"y":2, "x":6.75, "label":"F"},
-                {"y":2, "x":7.75, "label":"G"},
-                
-                {"y":2, "x":11.25,"label":"H"},
-                {"y":2, "x":12.25,"label":"J"},
-                {"y":2, "x":13.25,"label":"K"},
-                {"y":2, "x":14.25,"label":"L"},
-                
-                {"y":2, "x":16,   "label":";"},
-                {"y":2, "x":17,   "label":"'"},
-                {"y":2, "x":18,   "label":"#~ (ISO)"},
-                {"y":2, "x":19,   "label":"Enter (ANSI or ISO)", "w":1.25},
-                
-                
-                {"y":3, "x":0.5,  "label":"Shift", "w":1.25},
-                {"y":3, "x":1.75, "label":"\\| (ISO)"},
-                {"y":3, "x":2.75, "label":"Z"},
-                
-                {"y":3, "x":4.75, "label":"X"},          
-                {"y":3, "x":5.75, "label":"C"},        
-                {"y":3, "x":6.75, "label":"V"},
-                {"y":3, "x":7.75, "label":"B"},
-                {"y":3, "x":8.75, "label":"Super"},
-                
-                {"y":3, "x":10.25,"label":"Fn"},
-                {"y":3, "x":11.25,"label":"N"},
-                {"y":3, "x":12.25,"label":"M"},
-                {"y":3, "x":13.25,"label":","},
-                {"y":3, "x":14.25,"label":"."},
-                
-                {"y":3, "x":16.25,"label":"/"},
-                {"y":3, "x":17.25,"label":"Shift", "w":1.75},
-                {"y":3, "x":19,   "label":"Up"},
-                
-                
-                {"y":4, "x":1.25, "label":"Control", "w":1.5},
-                
-                {"y":4, "x":6.25, "label":"Alt", "w":1.5},
-                {"y":4, "x":7.75, "label":"Space", "w":2},
-                
-                {"y":4, "x":10.25,"label":"Space", "w":2.75},
-                {"y":4, "x":16.5, "label":"Control", "w":1.5},
-                {"y":4, "x":18,   "label":"Left"},
-                {"y":4, "x":19,   "label":"Down"},
-                {"y":4, "x":20,   "label":"Right"}
-            ]
-        },
-        "LAYOUT_ansi": {
-            "layout": [
-                {"y":0, "x":0,    "label":"Home"},   
-                
-                {"y":0, "x":1.5,  "label":"Esc"},    
-                {"y":0, "x":2.5,  "label":"`"},      
-                {"y":0, "x":3.5,  "label":"1"}, 
-                
-                {"y":0, "x":4.75, "label":"2"},          
-                {"y":0, "x":5.75, "label":"3"},        
-                {"y":0, "x":6.75, "label":"4"},
-                {"y":0, "x":7.75, "label":"5"},        
-                
-                {"y":0, "x":11.25,"label":"6"},
-                {"y":0, "x":12.25,"label":"7"},
-                {"y":0, "x":13.25,"label":"8"},
-                {"y":0, "x":14.25,"label":"9"},
-                
-                {"y":0, "x":15.5, "label":"0"},
-                {"y":0, "x":16.5, "label":"-"},
-                {"y":0, "x":17.5, "label":"="},
-                {"y":0, "x":18.5, "label":"Backspace", "w":2},
-                
-                
-                {"y":1, "x":0,    "label":"End"},  
-                
-                {"y":1, "x":1.75, "label":"Tab", "w":1.5},  
-                {"y":1, "x":3.25, "label":"Q"},  
-                    
-                {"y":1, "x":4.75, "label":"W"},          
-                {"y":1, "x":5.75, "label":"E"},        
-                {"y":1, "x":6.75, "label":"R"},
-                {"y":1, "x":7.75, "label":"T"},
-                
-                {"y":1, "x":11.25,"label":"Y"},
-                {"y":1, "x":12.25,"label":"U"},
-                {"y":1, "x":13.25,"label":"I"},
-                {"y":1, "x":14.25,"label":"O"},
-                
-                {"y":1, "x":15.75,"label":"P"},
-                {"y":1, "x":16.75,"label":"["},
-                {"y":1, "x":17.75,"label":"]"},
-                {"y":1, "x":18.75,"label":"\\", "w":1.5},
-                
-                
-                {"y":2, "x":1.25, "label":"Caps Lock", "w":1.75},
-                {"y":2, "x":3,    "label":"A"},
-                
-                {"y":2, "x":4.75, "label":"S"},          
-                {"y":2, "x":5.75, "label":"D"},        
-                {"y":2, "x":6.75, "label":"F"},
-                {"y":2, "x":7.75, "label":"G"},
-                
-                {"y":2, "x":11.25,"label":"H"},
-                {"y":2, "x":12.25,"label":"J"},
-                {"y":2, "x":13.25,"label":"K"},
-                {"y":2, "x":14.25,"label":"L"},
-                
-                {"y":2, "x":16,   "label":";"},
-                {"y":2, "x":17,   "label":"'"},
-                {"y":2, "x":18,   "label":"Enter", "w":2.25},
-                
-                
-                {"y":3, "x":0.5,  "label":"Shift", "w":2.25},
-                {"y":3, "x":2.75, "label":"Z"},
-                
-                {"y":3, "x":4.75, "label":"X"},          
-                {"y":3, "x":5.75, "label":"C"},        
-                {"y":3, "x":6.75, "label":"V"},
-                {"y":3, "x":7.75, "label":"B"},
-                {"y":3, "x":8.75, "label":"Super"},
-                
-                {"y":3, "x":10.25,"label":"Fn"},
-                {"y":3, "x":11.25,"label":"N"},
-                {"y":3, "x":12.25,"label":"M"},
-                {"y":3, "x":13.25,"label":","},
-                {"y":3, "x":14.25,"label":"."},
-                
-                {"y":3, "x":16.25,"label":"/"},
-                {"y":3, "x":17.25,"label":"Shift", "w":1.75},
-                {"y":3, "x":19,   "label":"Up"},
-                
-                
-                {"y":4, "x":1.25, "label":"Control", "w":1.5},
-                
-                {"y":4, "x":6.25, "label":"Alt", "w":1.5},
-                {"y":4, "x":7.75, "label":"Space", "w":2},
-                
-                {"y":4, "x":10.25,"label":"Space", "w":2.75},
-                {"y":4, "x":16.5, "label":"Control", "w":1.5},
-                {"y":4, "x":18,   "label":"Left"},
-                {"y":4, "x":19,   "label":"Down"},
-                {"y":4, "x":20,   "label":"Right"}
-            ]
-        },
-        "LAYOUT_split_bs": {
-            "layout": [
-                {"y":0, "x":0,    "label":"Home"},   
-                
-                {"y":0, "x":1.5,  "label":"Esc"},    
-                {"y":0, "x":2.5,  "label":"`"},      
-                {"y":0, "x":3.5,  "label":"1"}, 
-                
-                {"y":0, "x":4.75, "label":"2"},          
-                {"y":0, "x":5.75, "label":"3"},        
-                {"y":0, "x":6.75, "label":"4"},
-                {"y":0, "x":7.75, "label":"5"},        
-                
-                {"y":0, "x":11.25,"label":"6"},
-                {"y":0, "x":12.25,"label":"7"},
-                {"y":0, "x":13.25,"label":"8"},
-                {"y":0, "x":14.25,"label":"9"},
-                
-                {"y":0, "x":15.5, "label":"0"},
-                {"y":0, "x":16.5, "label":"-"},
-                {"y":0, "x":17.5, "label":"="},
-                {"y":0, "x":18.5, "label":"\\"},
-                {"y":0, "x":19.5, "label":"Del"},
-                
-                
-                {"y":1, "x":0,    "label":"End"},  
-                
-                {"y":1, "x":1.75, "label":"Tab", "w":1.5},  
-                {"y":1, "x":3.25, "label":"Q"},  
-                    
-                {"y":1, "x":4.75, "label":"W"},          
-                {"y":1, "x":5.75, "label":"E"},        
-                {"y":1, "x":6.75, "label":"R"},
-                {"y":1, "x":7.75, "label":"T"},
-                
-                {"y":1, "x":11.25,"label":"Y"},
-                {"y":1, "x":12.25,"label":"U"},
-                {"y":1, "x":13.25,"label":"I"},
-                {"y":1, "x":14.25,"label":"O"},
-                
-                {"y":1, "x":15.75,"label":"P"},
-                {"y":1, "x":16.75,"label":"["},
-                {"y":1, "x":17.75,"label":"]"},
-                {"y":1, "x":18.75,"label":"Backspace", "w":1.5},
-                
-                
-                {"y":2, "x":1.25, "label":"Control", "w":1.75},
-                {"y":2, "x":3,    "label":"A"},
-                
-                {"y":2, "x":4.75, "label":"S"},          
-                {"y":2, "x":5.75, "label":"D"},        
-                {"y":2, "x":6.75, "label":"F"},
-                {"y":2, "x":7.75, "label":"G"},
-                
-                {"y":2, "x":11.25,"label":"H"},
-                {"y":2, "x":12.25,"label":"J"},
-                {"y":2, "x":13.25,"label":"K"},
-                {"y":2, "x":14.25,"label":"L"},
-                
-                {"y":2, "x":16,   "label":";"},
-                {"y":2, "x":17,   "label":"'"},
-                {"y":2, "x":18,   "label":"Enter", "w":2.25},
-                
-                
-                {"y":3, "x":0.5,  "label":"Shift", "w":2.25},
-                {"y":3, "x":2.75, "label":"Z"},
-                
-                {"y":3, "x":4.75, "label":"X"},          
-                {"y":3, "x":5.75, "label":"C"},        
-                {"y":3, "x":6.75, "label":"V"},
-                {"y":3, "x":7.75, "label":"B"},
-                {"y":3, "x":8.75, "label":"Super"},
-                
-                {"y":3, "x":10.25,"label":"Fn"},
-                {"y":3, "x":11.25,"label":"N"},
-                {"y":3, "x":12.25,"label":"M"},
-                {"y":3, "x":13.25,"label":","},
-                {"y":3, "x":14.25,"label":"."},
-                
-                {"y":3, "x":16.25,"label":"/"},
-                {"y":3, "x":17.25,"label":"Shift", "w":1.75},
-                {"y":3, "x":19,   "label":"Up"},
-                
-                
-                {"y":4, "x":1.25, "label":"Control", "w":1.5},
-                
-                {"y":4, "x":6.25, "label":"Alt", "w":1.5},
-                {"y":4, "x":7.75, "label":"Space", "w":2},
-                
-                {"y":4, "x":10.25,"label":"Space", "w":2.75},
-                {"y":4, "x":16.5, "label":"Control", "w":1.5},
-                {"y":4, "x":18,   "label":"Left"},
-                {"y":4, "x":19,   "label":"Down"},
-                {"y":4, "x":20,   "label":"Right"}
-            ]
-        },
-        "LAYOUT_iso": {
-            "layout": [
-                {"y":0, "x":0,    "label":"Home"},   
-                
-                {"y":0, "x":1.5,  "label":"Esc"},    
-                {"y":0, "x":2.5,  "label":"`"},      
-                {"y":0, "x":3.5,  "label":"1"}, 
-                
-                {"y":0, "x":4.75, "label":"2"},          
-                {"y":0, "x":5.75, "label":"3"},        
-                {"y":0, "x":6.75, "label":"4"},
-                {"y":0, "x":7.75, "label":"5"},        
-                
-                {"y":0, "x":11.25,"label":"6"},
-                {"y":0, "x":12.25,"label":"7"},
-                {"y":0, "x":13.25,"label":"8"},
-                {"y":0, "x":14.25,"label":"9"},
-                
-                {"y":0, "x":15.5, "label":"0"},
-                {"y":0, "x":16.5, "label":"-"},
-                {"y":0, "x":17.5, "label":"="},
-                {"y":0, "x":18.5, "label":"Backspace", "w":2},
-                
-                
-                {"y":1, "x":0,    "label":"End"},  
-                
-                {"y":1, "x":1.75, "label":"Tab", "w":1.5},  
-                {"y":1, "x":3.25, "label":"Q"},  
-                    
-                {"y":1, "x":4.75, "label":"W"},          
-                {"y":1, "x":5.75, "label":"E"},        
-                {"y":1, "x":6.75, "label":"R"},
-                {"y":1, "x":7.75, "label":"T"},
-                
-                {"y":1, "x":11.25,"label":"Y"},
-                {"y":1, "x":12.25,"label":"U"},
-                {"y":1, "x":13.25,"label":"I"},
-                {"y":1, "x":14.25,"label":"O"},
-                
-                {"y":1, "x":15.75,"label":"P"},
-                {"y":1, "x":16.75,"label":"["},
-                {"y":1, "x":17.75,"label":"]"},
-                
-                
-                {"y":2, "x":1.25, "label":"Caps Lock", "w":1.75},
-                {"y":2, "x":3,    "label":"A"},
-                
-                {"y":2, "x":4.75, "label":"S"},          
-                {"y":2, "x":5.75, "label":"D"},        
-                {"y":2, "x":6.75, "label":"F"},
-                {"y":2, "x":7.75, "label":"G"},
-                
-                {"y":2, "x":11.25,"label":"H"},
-                {"y":2, "x":12.25,"label":"J"},
-                {"y":2, "x":13.25,"label":"K"},
-                {"y":2, "x":14.25,"label":"L"},
-                
-                {"y":2, "x":16,   "label":";"},
-                {"y":2, "x":17,   "label":"'"},
-                {"y":2, "x":18,   "label":"#"},
-                {"y":1, "x":19,   "label":"Enter", "w":1.25, "h":2},
-                
-                
-                {"y":3, "x":0.5,  "label":"Shift", "w":1.25},
-                {"y":3, "x":1.75, "label":"\\"},
-                {"y":3, "x":2.75, "label":"Z"},
-                
-                {"y":3, "x":4.75, "label":"X"},          
-                {"y":3, "x":5.75, "label":"C"},        
-                {"y":3, "x":6.75, "label":"V"},
-                {"y":3, "x":7.75, "label":"B"},
-                {"y":3, "x":8.75, "label":"Super"},
-                
-                {"y":3, "x":10.25,"label":"Fn"},
-                {"y":3, "x":11.25,"label":"N"},
-                {"y":3, "x":12.25,"label":"M"},
-                {"y":3, "x":13.25,"label":","},
-                {"y":3, "x":14.25,"label":"."},
-                
-                {"y":3, "x":16.25,"label":"/"},
-                {"y":3, "x":17.25,"label":"Shift", "w":1.75},
-                {"y":3, "x":19,   "label":"Up"},
-                
-                
-                {"y":4, "x":1.25, "label":"Control", "w":1.5},
-                
-                {"y":4, "x":6.25, "label":"Alt", "w":1.5},
-                {"y":4, "x":7.75, "label":"Space", "w":2},
-                
-                {"y":4, "x":10.25,"label":"Space", "w":2.75},
-                {"y":4, "x":16.5, "label":"Control", "w":1.5},
-                {"y":4, "x":18,   "label":"Left"},
-                {"y":4, "x":19,   "label":"Down"},
-                {"y":4, "x":20,   "label":"Right"}
-            ]
-        }
-        
-    }
-
-}

keyboards/boardrun/bizarre/keymaps/default/keymap.c

@@ -1,71 +0,0 @@
-/*
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-#define _FUNC   MO(_FNBIZARRE)
-
-// Layer shorthand
-enum layer_names {
-    _BIZARRE,
-    _FNBIZARRE,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    /*Bizarre Base Layer (defaults for "any" layout)
-    * +-------+   +-----------------------+ +-------------------------------+                   +-------------------------------+ +---------------------------------------+
-    * ¦ HOME  ¦   ¦ ESC   ¦ `~    ¦ 1     ¦ ¦ 2     ¦ 3     ¦ 4     ¦ 5     ¦                   ¦ 6     ¦ 7     ¦ 8     ¦ 9     ¦ ¦ 0     ¦ -     ¦ =     ¦ BKSP  ¦ DEL   ¦
-    * +-------¦   +-----------------------+ +-------+-------+-------+-------¦                   +-------+-------+-------+-------¦ +---------------------------------------+
-    * ¦ END   ¦     ¦ TAB       ¦ Q     ¦   ¦ W     ¦ E     ¦ R     ¦ T     ¦                   ¦ Y     ¦ U     ¦ I     ¦ O     ¦   ¦ P     ¦ [     ¦ ]     ¦ \ ANSI    ¦
-    * +-------+ +-----------------------+   +-------+-------+-------+-------¦                   +-------+-------+-------+-------¦   +-----------------------------------¦
-    *           ¦ CAPS        ¦ A     ¦     ¦ S     ¦ D     ¦ F     ¦ G     ¦                   ¦ H     ¦ J     ¦ K     ¦ L     ¦     ¦ ;     ¦ '     ¦ # ISO ¦ ENTER   ¦
-    *     +---------------------------+     +-------+-------+-------+-------+-------+   +-------+-------+-------+-------+-------¦     +-----------------------+---------+
-    *     ¦ LSHIFT  ¦ \ ISO ¦ Z     ¦       ¦ X     ¦ C     ¦ V     ¦ B     ¦ LGUI  ¦   ¦ FN    ¦ N     ¦ M     ¦ ,     ¦ .     ¦       ¦ /     ¦ RSHIFT      ¦ UP    ¦
-    *     +-----------------+-------+       +-----------------------+---------------¦   +---------------------------------------+       +---------------------+-------+-------+
-    *           ¦ LCTRL     ¦                           ¦ LALT      ¦ SPACE         ¦   ¦ SPACE               ¦                           ¦ RCTRL     ¦ LEFT  ¦ DOWN  ¦ RIGHT ¦
-    *           +-----------+                           +---------------------------+   +---------------------+                           +-----------------------------------+
-    */
-    
-    [_BIZARRE] = LAYOUT_all(
-       KC_HOME,    KC_ESC, KC_GRV, KC_1,     KC_2,   KC_3,   KC_4,   KC_5,                       KC_6,   KC_7,   KC_8,   KC_9,     KC_0,   KC_MINS,KC_EQL, KC_BSPC,KC_DEL,
-       KC_END,       KC_TAB,     KC_Q,       KC_W,   KC_E,   KC_R,   KC_T,                       KC_Y,   KC_U,   KC_I,   KC_O,       KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,
-                 KC_CAPS,      KC_A,         KC_S,   KC_D,   KC_F,   KC_G,                       KC_H,   KC_J,   KC_K,   KC_L,         KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT,
-           KC_LSFT,  KC_NUBS,KC_Z,           KC_X,   KC_C,   KC_V,   KC_B,   KC_LGUI,    _FUNC,  KC_N,   KC_M,   KC_COMM,KC_DOT,         KC_SLSH,KC_RSFT,      KC_UP,
-                 KC_LCTL,                                KC_LALT,    KC_SPC,             KC_SPC,                                           KC_RCTL,    KC_LEFT,KC_DOWN,KC_RGHT
-    ), 
-    
-    /*Bizarre Function Layer
-    * +-------+   +-----------------------+ +-------------------------------+                   +-------------------------------+ +---------------------------------------+
-    * ¦ RESET ¦   ¦       ¦       ¦ F1    ¦ ¦ F2    ¦ F3    ¦ F4    ¦ F5    ¦                   ¦ F6    ¦ F7    ¦ F8    ¦ F9    ¦ ¦ F10   ¦ F11   ¦ F12   ¦ DEL   ¦       ¦
-    * +-------¦   +-----------------------+ +-------+-------+-------+-------¦                   +-------+-------+-------+-------¦ +---------------------------------------+
-    * ¦       ¦     ¦           ¦       ¦   ¦       ¦       ¦       ¦       ¦                   ¦       ¦       ¦ INS   ¦       ¦   ¦ PRINT ¦       ¦       ¦           ¦
-    * +-------+ +-----------------------+   +-------+-------+-------+-------¦                   +-------+-------+-------+-------¦   +-----------------------------------¦
-    *           ¦             ¦       ¦     ¦ SCRLL ¦       ¦       ¦       ¦                   ¦       ¦       ¦       ¦       ¦     ¦       ¦       ¦       ¦         ¦
-    *     +---------------------------+     +-------+-------+-------+-------+-------+   +-------+-------+-------+-------+-------¦     +-----------------------+---------+
-    *     ¦         ¦       ¦       ¦       ¦       ¦       ¦       ¦ PAUSE ¦ RGUI  ¦   ¦       ¦       ¦ MENU  ¦       ¦       ¦       ¦       ¦             ¦ PGUP  ¦
-    *     +-----------------+-------+       +-----------------------+---------------¦   +---------------------------------------+       +---------------------+-------+-------+
-    *           ¦           ¦                           ¦           ¦               ¦   ¦ RALT                ¦                           ¦           ¦ HOME  ¦ PGDN  ¦ END   ¦
-    *           +-----------+                           +---------------------------+   +---------------------+                           +-----------------------------------+
-    */
-    
-    [_FNBIZARRE] = LAYOUT_all(
-       RESET,     _______,_______,KC_F1,     KC_F2,  KC_F3,  KC_F4,  KC_F5,                      KC_F6,  KC_F7,  KC_F8,  KC_F9,    KC_F10, KC_F11, KC_F12, KC_DEL, _______,
-       _______,      _______,    _______,    _______,_______,RESET,  _______,                    _______,_______,KC_INS ,_______,    KC_PSCR,_______,_______,_______,
-                 _______,      _______,      KC_SLCK,_______,_______,_______,                    _______,_______,_______,_______,      _______,_______,_______,_______,
-           _______,  _______,_______,        _______,_______,_______,KC_PAUS,KC_RGUI,    _______,_______,KC_MENU,_______,_______,        _______,_______,      KC_PGUP,
-                 _______,                                _______,    _______,            KC_RALT,                                          _______,    KC_HOME,KC_PGDN,KC_END
-    )
-};

keyboards/boardrun/bizarre/keymaps/nopunin10did/keymap.c

@@ -1,50 +0,0 @@
-/*
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-#define _FUNC   MO(_FN)
-#define _LSADEL LSA_T(KC_DEL)
-#define _AGRHOM RALT_T(KC_HOME)
-#define _CTLEND RCTL_T(KC_END)
-#define _CTLALT LCTL(KC_LALT)
-#define _LSNUBS LSFT_T(KC_NUBS)
-#define _MINMIZ LGUI(KC_D)
-
-// Layer shorthand
-enum layer_names {
-    _ZERO,
-    _FN,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    
-    [_ZERO] = LAYOUT_ansi(
-       KC_ESC,    KC_BSLS,KC_GRV,  KC_1,     KC_2,   KC_3,   KC_4,   KC_5,                       KC_6,   KC_7,   KC_8,   KC_9,     KC_0,   KC_MINS,KC_EQL,KC_BSPC,
-       KC_INS,         KC_TAB,   KC_Q,       KC_W,   KC_E,   KC_R,   KC_T,                       KC_Y,   KC_U,   KC_I,   KC_O,       KC_P,   KC_LBRC,KC_RBRC,KC_BSPC,
-                 KC_LCTL,      KC_A,         KC_S,   KC_D,   KC_F,   KC_G,                       KC_H,   KC_J,   KC_K,   KC_L,         KC_SCLN,KC_QUOT,  KC_ENT,
-           KC_LSFT,          KC_Z,           KC_X,   KC_C,   KC_V,   KC_B,   _LSADEL,    KC_LGUI,KC_N,   KC_M,   KC_COMM,KC_DOT,         KC_SLSH,KC_RSFT,      KC_UP,
-                 _FUNC,                                  KC_LALT,    KC_SPC,             _AGRHOM,                                          _CTLEND,    KC_LEFT,KC_DOWN,KC_RGHT
-    ), 
-
-    
-    [_FN] = LAYOUT_ansi(
-       _MINMIZ,   _______,_______,   KC_F1,    KC_F2,  KC_F3,  KC_F4,  KC_F5,                    KC_F6,  KC_F7,  KC_F8,  KC_F9,    KC_F10, KC_F11, KC_F12, _______,
-       KC_CALC,      _______,    _______,    _______,_______,RESET,  _______,                    _______,_______,KC_INS ,_______,    KC_PSCR,_______,_______,_______,
-                 KC_CAPS,      _______,      KC_SLCK,_______,_______,_______,                    _______,_______,_______,_______,      _______,_______,_______,
-           _LSNUBS,          _______,        _______,_______,_______,KC_PAUS,_______,    KC_RGUI,_______,KC_MENU,_______,_______,        _______,_______,      KC_PGUP,
-                 _______,                                _CTLALT,    KC_DEL,             _______,                                          _______,    _______,KC_PGDN,_______
-    )
-};

keyboards/boardrun/bizarre/keymaps/via/keymap.c

@@ -1,81 +0,0 @@
-/*
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    /*Bizarre Base Layer (defaults for "any" layout)
-    * +-------+   +-----------------------+ +-------------------------------+                   +-------------------------------+ +---------------------------------------+
-    * ¦ HOME  ¦   ¦ ESC   ¦ `~    ¦ 1     ¦ ¦ 2     ¦ 3     ¦ 4     ¦ 5     ¦                   ¦ 6     ¦ 7     ¦ 8     ¦ 9     ¦ ¦ 0     ¦ -     ¦ =     ¦ BKSP  ¦ DEL   ¦
-    * +-------¦   +-----------------------+ +-------+-------+-------+-------¦                   +-------+-------+-------+-------¦ +---------------------------------------+
-    * ¦ END   ¦     ¦ TAB       ¦ Q     ¦   ¦ W     ¦ E     ¦ R     ¦ T     ¦                   ¦ Y     ¦ U     ¦ I     ¦ O     ¦   ¦ P     ¦ [     ¦ ]     ¦ \ ANSI    ¦
-    * +-------+ +-----------------------+   +-------+-------+-------+-------¦                   +-------+-------+-------+-------¦   +-----------------------------------¦
-    *           ¦ CAPS        ¦ A     ¦     ¦ S     ¦ D     ¦ F     ¦ G     ¦                   ¦ H     ¦ J     ¦ K     ¦ L     ¦     ¦ ;     ¦ '     ¦ # ISO ¦ ENTER   ¦
-    *     +---------------------------+     +-------+-------+-------+-------+-------+   +-------+-------+-------+-------+-------¦     +-----------------------+---------+
-    *     ¦ LSHIFT  ¦ \ ISO ¦ Z     ¦       ¦ X     ¦ C     ¦ V     ¦ B     ¦ LGUI  ¦   ¦ MO    ¦ N     ¦ M     ¦ ,     ¦ .     ¦       ¦ /     ¦ RSHIFT      ¦ UP    ¦
-    *     +-----------------+-------+       +-----------------------+---------------¦   +---------------------------------------+       +---------------------+-------+-------+
-    *           ¦ LCTRL     ¦                           ¦ LALT      ¦ SPACE         ¦   ¦ SPACE               ¦                           ¦ RCTRL     ¦ LEFT  ¦ DOWN  ¦ RIGHT ¦
-    *           +-----------+                           +---------------------------+   +---------------------+                           +-----------------------------------+
-    */
-    
-    [0] = LAYOUT_all(
-       KC_HOME,    KC_ESC, KC_GRV, KC_1,     KC_2,   KC_3,   KC_4,   KC_5,                       KC_6,   KC_7,   KC_8,   KC_9,     KC_0,   KC_MINS,KC_EQL, KC_BSPC,KC_DEL,
-       KC_END,       KC_TAB,     KC_Q,       KC_W,   KC_E,   KC_R,   KC_T,                       KC_Y,   KC_U,   KC_I,   KC_O,       KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,
-                 KC_CAPS,      KC_A,         KC_S,   KC_D,   KC_F,   KC_G,                       KC_H,   KC_J,   KC_K,   KC_L,         KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT,
-           KC_LSFT,  KC_NUBS,KC_Z,           KC_X,   KC_C,   KC_V,   KC_B,   KC_LGUI,    MO(1),  KC_N,   KC_M,   KC_COMM,KC_DOT,         KC_SLSH,KC_RSFT,      KC_UP,
-                 KC_LCTL,                                KC_LALT,    KC_SPC,             KC_SPC,                                           KC_RCTL,    KC_LEFT,KC_DOWN,KC_RGHT
-    ), 
-    
-    /*Bizarre Function Layer
-    * +-------+   +-----------------------+ +-------------------------------+                   +-------------------------------+ +---------------------------------------+
-    * ¦ RESET ¦   ¦       ¦       ¦ F1    ¦ ¦ F2    ¦ F3    ¦ F4    ¦ F5    ¦                   ¦ F6    ¦ F7    ¦ F8    ¦ F9    ¦ ¦ F10   ¦ F11   ¦ F12   ¦ DEL   ¦       ¦
-    * +-------¦   +-----------------------+ +-------+-------+-------+-------¦                   +-------+-------+-------+-------¦ +---------------------------------------+
-    * ¦       ¦     ¦           ¦       ¦   ¦       ¦       ¦       ¦       ¦                   ¦       ¦       ¦ INS   ¦       ¦   ¦ PRINT ¦       ¦       ¦           ¦
-    * +-------+ +-----------------------+   +-------+-------+-------+-------¦                   +-------+-------+-------+-------¦   +-----------------------------------¦
-    *           ¦             ¦       ¦     ¦ SCRLL ¦       ¦       ¦       ¦                   ¦       ¦       ¦       ¦       ¦     ¦       ¦       ¦       ¦         ¦
-    *     +---------------------------+     +-------+-------+-------+-------+-------+   +-------+-------+-------+-------+-------¦     +-----------------------+---------+
-    *     ¦         ¦       ¦       ¦       ¦       ¦       ¦       ¦ PAUSE ¦ RGUI  ¦   ¦       ¦       ¦ MENU  ¦       ¦       ¦       ¦       ¦             ¦ PGUP  ¦
-    *     +-----------------+-------+       +-----------------------+---------------¦   +---------------------------------------+       +---------------------+-------+-------+
-    *           ¦           ¦                           ¦           ¦               ¦   ¦ RALT                ¦                           ¦           ¦ HOME  ¦ PGDN  ¦ END   ¦
-    *           +-----------+                           +---------------------------+   +---------------------+                           +-----------------------------------+
-    */
-    
-    [1] = LAYOUT_all(
-       RESET,     _______,_______,KC_F1,     KC_F2,  KC_F3,  KC_F4,  KC_F5,                      KC_F6,  KC_F7,  KC_F8,  KC_F9,    KC_F10, KC_F11, KC_F12, KC_DEL, _______,
-       _______,      _______,    _______,    _______,_______,RESET,  _______,                    _______,_______,KC_INS ,_______,    KC_PSCR,_______,_______,_______,
-                 _______,      _______,      KC_SLCK,_______,_______,_______,                    _______,_______,_______,_______,      _______,_______,_______,_______,
-           _______,  _______,_______,        _______,_______,_______,KC_PAUS,KC_RGUI,    _______,_______,KC_MENU,_______,_______,        _______,_______,      KC_PGUP,
-                 _______,                                _______,    _______,            KC_RALT,                                          _______,    KC_HOME,KC_PGDN,KC_END
-    ),
-
-    [2] = LAYOUT_all(
-       _______,     _______,_______,_______, _______,_______,_______,_______,                    _______,_______,_______,_______,    _______,_______,_______,_______,_______,
-       _______,      _______,    _______,    _______,_______,_______,_______,                    _______,_______,_______,_______,    _______,_______,_______,_______,
-                 _______,      _______,      _______,_______,_______,_______,                    _______,_______,_______,_______,      _______,_______,_______,_______,
-           _______,  _______,_______,        _______,_______,_______,_______,_______,    _______,_______,_______,_______,_______,        _______,_______,      _______,
-                 _______,                                _______,    _______,            _______,                                          _______,    _______,_______,_______
-    ),
-
-    [3] = LAYOUT_all(
-       _______,     _______,_______,_______, _______,_______,_______,_______,                    _______,_______,_______,_______,    _______,_______,_______,_______,_______,
-       _______,      _______,    _______,    _______,_______,_______,_______,                    _______,_______,_______,_______,    _______,_______,_______,_______,
-                 _______,      _______,      _______,_______,_______,_______,                    _______,_______,_______,_______,      _______,_______,_______,_______,
-           _______,  _______,_______,        _______,_______,_______,_______,_______,    _______,_______,_______,_______,_______,        _______,_______,      _______,
-                 _______,                                _______,    _______,            _______,                                          _______,    _______,_______,_______
-    )
-
-
-};

keyboards/boardrun/bizarre/keymaps/via/rules.mk

@@ -1,2 +0,0 @@
-VIA_ENABLE = yes
-LTO_ENABLE = yes

keyboards/boardrun/bizarre/readme.md

@@ -1,23 +0,0 @@
-# Boardrun Bizarre
-
-![Boardrun Bizarre](https://i.imgur.com/usKQUWI.jpg)
-
-The Boardrun is a family of ortholinear keyboards with columnar stagger, inspired by the Alice layout. The Classic is a 60% layout that uses Ergodox keycap sets for compatibility, whereas the Bizarre is a 65% layout that uses standard (staggered) keycap sets in an ortholinear arrangement.
-
-The Boardrun is an evolution of the Boardwalk layout. The Boardwalk proved that the Ergodox keycap set could be adapted to more keyboards that provided a more compact design and layout flexibility. While adaptation was a design goal of the Boardwalk layout, the Boardrun was designed to distill and refine the best aspects of the current state of keyboard layouts, taking into account current trends in staggered design, the Ergodox keycap layout, and the Boardwalk's most popular layouts. To that end, a columnar staggered, ortholinear layout with alpha rotation was settled on, using the "HHKB" layout from the Boardwalk. The result is two layouts that are comfortable, familiar, and have great compatibility with keysets.
-
--   Keyboard Maintainer: QMK Community
--   Hardware Supported: Boardrun Bizarre Ortholinear PCB
--   Hardware Availability: mkultra.click
-
-Make example for this keyboard (after setting up your build environment):
-
-    make boardrun/bizarre:default
-    
-Flashing example for this keyboard:
-
-    make boardrun/bizarre:default:flash
-    
-The board may be reset into bootloader mode via either the reset button (on the bottom of the PCB) or a configured RESET shortcut (which may vary depending on when the PCB was flashed).
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/boardrun/bizarre/rules.mk

@@ -1,23 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
-AUDIO_ENABLE = no           # Audio output
-UNICODE_ENABLE = no         # Unicode

keyboards/boardrun/classic/classic.c

@@ -1,16 +0,0 @@
-/*
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "classic.h"

keyboards/boardrun/classic/classic.h

@@ -1,33 +0,0 @@
-/*
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT_classic( \
-  k11, k12, k13, k14, k15, k16, k17,          k18, k19, k110, k111, k112, k113, k114, \
-  k21, k22, k23, k24, k25, k26, k27,          k28, k29, k210, k211, k212, k213, k214, \
-  k31, k32, k33, k34, k35, k36, k37,          k38, k39, k310, k311, k312, k313, k314, \
-  k41, k42, k43, k44, k45, k46, k47,          k48, k49, k410, k411, k412, k413, k414, \
-       k52, k53, k54, k55, k56, k57,   k51,   k58, k59, k510, k511, k512, k513       \
-) \
-{ \
-  { k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114 , KC_NO, KC_NO, KC_NO,}, \
-  { k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214 , KC_NO, KC_NO, KC_NO,}, \
-  { k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 , KC_NO, KC_NO, KC_NO,}, \
-  { k41, k42, k43, k44, k45, k46, k47, k48, k49, k410, k411, k412, k413, k414 , KC_NO, KC_NO, KC_NO,}, \
-  { k51, k52, k53, k54, k55, k56, k57, k58, k59, k510, k511, k512, k513, KC_NO, KC_NO, KC_NO, KC_NO} \
-}

keyboards/boardrun/classic/config.h

@@ -1,83 +0,0 @@
-/*
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xCDCD
-#define PRODUCT_ID      0x5338
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    shensmobile
-#define PRODUCT         Boardrun Classic
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 17
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
-#define MATRIX_COL_PINS { F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0, B3, B2, B1 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN F5
-// #define BACKLIGHT_LEVELS 6
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 10
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-// ws2812 options
-#define RGB_DI_PIN B7 // pin the DI on the ws2812 is hooked-up to
-#define RGBLIGHT_ANIMATIONS // run RGB animations
-#define RGBLED_NUM 14 // number of LEDs
-#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
-#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
-#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)

keyboards/boardrun/classic/info.json

@@ -1,89 +0,0 @@
-{
-    "keyboard_name": "Boardrun Classic",
-    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/boardrun/classic",
-    "maintainer": "QMK Community",
-    "manufacturer": "shensmobile",
-    "width": 16.5,
-    "height": 5,
-    "layouts": {
-        "LAYOUT_classic": {
-            "layout": [
-                {"y":0, "x":0,   "label":"Esc", "w":1.5},   
-                {"y":0, "x":1.5, "label":"1"},    
-                {"y":0, "x":2.5, "label":"2"},      
-                {"y":0, "x":3.5, "label":"3"}, 
-                {"y":0, "x":4.5, "label":"4"},          
-                {"y":0, "x":5.5, "label":"5"},        
-                {"y":0, "x":6.5, "label":"-"},
-                {"y":0, "x":9,   "label":"="},        
-                {"y":0, "x":10,  "label":"6"},
-                {"y":0, "x":11,  "label":"7"},
-                {"y":0, "x":12,  "label":"8"},
-                {"y":0, "x":13,  "label":"9"},
-                {"y":0, "x":14,  "label":"0"},
-                {"y":0, "x":15,  "label":"Backspace", "w":1.5},
-                
-                {"y":1, "x":0,   "label":"Tab", "w":1.5},
-                {"y":1, "x":1.5, "label":"Q"},    
-                {"y":1, "x":2.5, "label":"W"},      
-                {"y":1, "x":3.5, "label":"E"}, 
-                {"y":1, "x":4.5, "label":"R"},          
-                {"y":1, "x":5.5, "label":"T"},        
-                {"y":1, "x":6.5, "label":"["},
-                {"y":1, "x":9,   "label":"]"},        
-                {"y":1, "x":10,  "label":"Y"},
-                {"y":1, "x":11,  "label":"U"},
-                {"y":1, "x":12,  "label":"I"},
-                {"y":1, "x":13,  "label":"O"},
-                {"y":1, "x":14,  "label":"P"},
-                {"y":1, "x":15,  "label":"\\",    "w":1.5},
-                
-                {"y":2, "x":0,   "label":"LCtrl", "w":1.5},
-                {"y":2, "x":1.5, "label":"A"},    
-                {"y":2, "x":2.5, "label":"S"},      
-                {"y":2, "x":3.5, "label":"D"}, 
-                {"y":2, "x":4.5, "label":"F"},          
-                {"y":2, "x":5.5, "label":"G"},        
-                {"y":2, "x":6.5, "label":"Home"},
-                {"y":2, "x":9,   "label":"PgUp"},        
-                {"y":2, "x":10,  "label":"H"},
-                {"y":2, "x":11,  "label":"J"},
-                {"y":2, "x":12,  "label":"K"},
-                {"y":2, "x":13,  "label":"L"},
-                {"y":2, "x":14,  "label":";"},
-                {"y":2, "x":15,  "label":"'", "w":1.5},
-                
-                {"y":3, "x":0,   "label":"LShift", "w":1.5},
-                {"y":3, "x":1.5, "label":"Z"},    
-                {"y":3, "x":2.5, "label":"X"},      
-                {"y":3, "x":3.5, "label":"C"}, 
-                {"y":3, "x":4.5, "label":"V"},          
-                {"y":3, "x":5.5, "label":"B"},        
-                {"y":3, "x":6.5, "label":"End"},
-                {"y":3, "x":9,   "label":"PgDn"},        
-                {"y":3, "x":10,  "label":"N"},
-                {"y":3, "x":11,  "label":"M"},
-                {"y":3, "x":12,  "label":","},
-                {"y":3, "x":13,  "label":"."},
-                {"y":3, "x":14,  "label":"/"},
-                {"y":3, "x":15,  "label":"RShift / Enter", "w":1.5},
-                
-                {"y":4, "x":1.5, "label":"LGui"},    
-                {"y":4, "x":2.5, "label":"Del"},      
-                {"y":4, "x":3.5, "label":"`"}, 
-                {"y":4, "x":4.5, "label":"LAlt"},          
-                {"y":4, "x":5.5, "label":"Space"},        
-                {"y":4, "x":6.5, "label":"Space"},
-                {"y":4, "x":7.75,"label":"Fn"},
-                {"y":4, "x":9,   "label":"Space / AltGr"},        
-                {"y":4, "x":10,  "label":"Space / AltGr"},
-                {"y":4, "x":11,  "label":"Left"},
-                {"y":4, "x":12,  "label":"Down"},
-                {"y":4, "x":13,  "label":"Up"},
-                {"y":4, "x":14,  "label":"Right"}
-
-            ]
-        }
-    }
-
-}

keyboards/boardrun/classic/keymaps/default/keymap.c

@@ -1,73 +0,0 @@
-/*
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-#define _FUNC       MO(_FNCLASSIC)
-#define _SHENT      RSFT_T(KC_ENT)
-#define _LSNUBS     LSFT_T(KC_NUBS)
-#define _AGRSPC     RALT_T(KC_SPC)
-
-
-// Layer shorthand
-enum layer_names {
-    _CLASSIC,
-    _FNCLASSIC,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    /* Base Layer
-     * .--------------------------------------------------------------.        .--------------------------------------------------------------.
-     * | ESC    | 1      | 2      | 3      | 4      | 5      | -      |        | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
-     * |--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     * | TAB    | Q      | W      | E      | R      | T      | [      |        | ]      | Y      | U      | I      | O      | P      | |\     |
-     * |--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     * | LCTRL  | A      | S      | D      | F      | G      | HOME   |        | PG UP  | H      | J      | K      | L      | ;      | '      |
-     * |--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     * | LSHIFT | Z      | X      | C      | V      | B      | END    |        | PG DN  | N      | M      | ,      | .      | /      | SH/ENT |
-     * '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
-     *          | LGUI   | DEL    | ~`     | LALT   | SPACE  |        | FN     | SPACE  |        | LEFT   | DOWN   | UP     | RIGHT  |
-     *          '--------------------------------------------------------------------------------------------------------------------'
-     */
-    [_CLASSIC] = LAYOUT_classic(
-        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS,           KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC,           KC_RBRC, KC_Y,	   KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
-        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME,           KC_PGUP, KC_H,	   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,            KC_PGDN, KC_N,	   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, _SHENT,
-                 KC_LGUI, KC_DEL,  KC_GRV,  KC_LALT, KC_SPC,  KC_SPC,  _FUNC,    _AGRSPC, _AGRSPC, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
-    ),
-
-    /* Function Layer
-	 * .--------------------------------------------------------------.        .--------------------------------------------------------------.
-     * | RESET  | F1     | F2     | F3     | F4     | F5     | F11    |        | F12    | F6     | F7     | F8     | F9     | F10    | DEL    |
-     * |--------+--------+--------+--------+--------+--------+--------+        +--------+--------+--------+--------+--------+--------+--------|
-     * |        |        | MENU   |        | RESET  |        |        |        |        |        |        | INS    |        | PRT SC |        |
-     * |--------+--------+--------+--------+--------+--------+--------+        +--------+--------+--------+--------+--------+--------+--------|
-     * | CAPSLK |        | SCROLL |        |        |        |        |        |        |        |        |        |        |        | RCTL   |
-     * |--------+--------+--------+--------+--------+--------+--------+        +--------+--------+--------+--------+--------+--------+--------|
-     * | UK \|  |        |        |        |        | PAUSE  |        |        |        |        | MUTE   | VOL DN | VOL UP |        |        |
-     * '--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+--------+--------+--------+--------'
-     *          | RGUI   |        |        | RALT   |                 |        |                 |        |        |        |        |
-     *          '--------------------------------------------------------------------------------------------------------------------'
-     */
-    [_FNCLASSIC] = LAYOUT_classic(
-        RESET,    KC_F1,  KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F11,           KC_F12,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
-        _______, _______, KC_APP,  _______, RESET,   _______, _______,          _______, _______, _______, KC_INS,  _______, KC_PSCR, _______,
-        KC_CAPS, _______, KC_SLCK, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, KC_RCTL,
-        _LSNUBS, _______, _______, _______, _______, KC_PAUS, _______,          _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______,
-                 KC_RGUI, _______, _______, KC_RALT, _______, _______, _______, _______, _______, _______, _______, _______, _______
-    )
-};

keyboards/boardrun/classic/keymaps/via/keymap.c

@@ -1,77 +0,0 @@
-/*
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    /* Base Layer
-     * .--------------------------------------------------------------.        .--------------------------------------------------------------.
-     * | ESC    | 1      | 2      | 3      | 4      | 5      | -      |        | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
-     * |--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     * | TAB    | Q      | W      | E      | R      | T      | [      |        | ]      | Y      | U      | I      | O      | P      | |\     |
-     * |--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     * | LCTRL  | A      | S      | D      | F      | G      | HOME   |        | PG UP  | H      | J      | K      | L      | ;      | '      |
-     * |--------+--------+--------+--------+--------+--------+--------|        |--------+--------+--------+--------+--------+--------+--------|
-     * | LSHIFT | Z      | X      | C      | V      | B      | END    |        | PG DN  | N      | M      | ,      | .      | /      | ENTER  |
-     * '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-------'
-     *          | LGUI   | DEL    | ~`     | LALT   | SPACE  |        | MO     | SPACE  |        | LEFT   | DOWN   | UP     | RIGHT  |
-     *          '--------------------------------------------------------------------------------------------------------------------'
-     */
-    [0] = LAYOUT_classic(
-        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS,           KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC,           KC_RBRC, KC_Y,	   KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
-        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME,           KC_PGUP, KC_H,	   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,            KC_PGDN, KC_N,	   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
-                 KC_LGUI, KC_DEL,  KC_GRV,  KC_LALT, KC_SPC,  KC_SPC,  MO(1),    KC_SPC,  KC_SPC,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
-    ),
-
-    /* Function Layer
-	 * .--------------------------------------------------------------.        .--------------------------------------------------------------.
-     * |        | F1     | F2     | F3     | F4     | F5     |        |        |        | F6     | F7     | F8     | F9     | F10    | F11    |
-     * |--------+--------+--------+--------+--------+--------+--------+        +--------+--------+--------+--------+--------+--------+--------|
-     * |        |        |        |        |        |        |        |        |        |        |        |        |        | PRT SC | F12    |
-     * |--------+--------+--------+--------+--------+--------+--------+        +--------+--------+--------+--------+--------+--------+--------|
-     * |        |        |        |        |        |        |        |        |        |        |        |        |        |        | RESET  |
-     * |--------+--------+--------+--------+--------+--------+--------+        +--------+--------+--------+--------+--------+--------+--------|
-     * |        |        |        |        |        |        |        |        |        |        | MUTE   | VOL DN | VOL UP |        |        |
-     * '--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+--------+--------+--------+-------'
-     *          |        |        |        |        |                 |        |                 |        |        |        |        |
-     *          '--------------------------------------------------------------------------------------------------------------------'
-     */
-    [1] = LAYOUT_classic(
-        _______,  KC_F1,  KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______,          _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
-        _______, _______, KC_APP,  _______, _______, _______, _______,          _______, _______, _______, _______, _______, KC_PSCR, KC_F12,
-        _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, RESET,
-        _______, _______, _______, _______, _______, _______, _______,          _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______,
-                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-    ),
-
-    [2] = LAYOUT_classic(
-        _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______,
-                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-    ),
-
-    [3] = LAYOUT_classic(
-        _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______,
-                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-    )
-};

keyboards/boardrun/classic/keymaps/via/rules.mk

@@ -1,2 +0,0 @@
-VIA_ENABLE = yes
-LTO_ENABLE = yes

keyboards/boardrun/classic/readme.md

@@ -1,23 +0,0 @@
-# Boardrun Classic
-
-![Boardrun Classic](https://i.imgur.com/Efo0ItKl.jpg)
-
-The Boardrun is a family of ortholinear keyboards with columnar stagger, inspired by the Alice layout. The Classic is a 60% layout that uses Ergodox keycap sets for compatibility, whereas the Bizarre is a 65% layout that uses standard (staggered) keycap sets in an ortholinear arrangement.
-
-The Boardrun is an evolution of the Boardwalk layout. The Boardwalk proved that the Ergodox keycap set could be adapted to more keyboards that provided a more compact design and layout flexibility. While adaptation was a design goal of the Boardwalk layout, the Boardrun was designed to distill and refine the best aspects of the current state of keyboard layouts, taking into account current trends in staggered design, the Ergodox keycap layout, and the Boardwalk's most popular layouts. To that end, a columnar staggered, ortholinear layout with alpha rotation was settled on, using the "HHKB" layout from the Boardwalk. The result is two layouts that are comfortable, familiar, and have great compatibility with keysets.
-
--   Keyboard Maintainer: QMK Community
--   Hardware Supported: Boardrun Classic Ortholinear PCB
--   Hardware Availability: mkultra.click
-
-Make example for this keyboard (after setting up your build environment):
-
-    make boardrun/classic:default
-
-Flashing example for this keyboard:
-    
-    make boardrun/classic:default:flash
-
-The board may be reset into bootloader mode via either the reset button (on the bottom of the PCB) or a configured RESET shortcut (which may vary depending on when the PCB was flashed).
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/boardrun/classic/rules.mk

@@ -1,23 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
-AUDIO_ENABLE = no           # Audio output
-UNICODE_ENABLE = no         # Unicode

keyboards/capsunlocked/cu65/config.h

@@ -1,105 +0,0 @@
-/*
-Copyright 2020 CapsUnlocked
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0x4355
-#define PRODUCT_ID      0x0065
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    CapsUnlocked
-#define PRODUCT         CU65
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 16
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F4, F5, F6, D3 }
-#define MATRIX_COL_PINS { D6, D7, D4, B4, B5, B6, C6, D5, C7, F0, E6, B0, B1, B7, B3, B2 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* disable these deprecated features by default */
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION

keyboards/capsunlocked/cu65/cu65.c

@@ -1,14 +0,0 @@
-/*
-Copyright 2020 CapsUnlocked
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include "cu65.h"

keyboards/capsunlocked/cu65/cu65.h

@@ -1,67 +0,0 @@
-/*
-Copyright 2020 CapsUnlocked
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-#include "quantum.h"
-
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-
-#define LAYOUT_all( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \
-	K300, K301,       K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \
-	K400, K401, K402,                         K407,             K410,       K412, K413, K414, K415  \
-) { \
-	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \
-	{ K100, KC_NO,K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \
-	{ K200, KC_NO,K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \
-	{ K300, K301, KC_NO,K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \
-	{ K400, K401, K402, KC_NO,KC_NO,KC_NO,KC_NO,K407, KC_NO,KC_NO,K410, KC_NO,K412, K413, K414, K415 }  \
-}
-
-#define LAYOUT_65_ansi( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, K015, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, K215, \
-	K300,             K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \
-	K400, K401, K402,                         K407,             K410,       K412, K413, K414, K415  \
-) { \
-	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO,K014, K015 }, \
-	{ K100, KC_NO,K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \
-	{ K200, KC_NO,K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,KC_NO, K214, K215 }, \
-	{ K300, KC_NO, KC_NO,K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \
-	{ K400, K401, K402, KC_NO,KC_NO,KC_NO,KC_NO,K407, KC_NO,KC_NO,K410, KC_NO,K412, K413, K414, K415 }  \
-}
-
-#define LAYOUT_65_iso( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, K015, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K115, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \
-	K300, K301,       K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \
-	K400, K401, K402,                         K407,             K410,       K412, K413, K414, K415  \
-) { \
-	{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO,K014, K015 }, \
-	{ K100, KC_NO,K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO,K115 }, \
-	{ K200, KC_NO,K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \
-	{ K300, K301, KC_NO,K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \
-	{ K400, K401, K402, KC_NO,KC_NO,KC_NO,KC_NO,K407, KC_NO,KC_NO,K410, KC_NO,K412, K413, K414, K415 }  \
-}

keyboards/capsunlocked/cu65/info.json

@@ -1,15 +0,0 @@
-{
-    "keyboard_name": "CU65",
-    "url": "",
-    "maintainer": "qmk",
-    "width": 16,
-    "height": 5,
-    "layouts": {
-      "LAYOUT_65_ansi": {
-        "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
-      },
-      "LAYOUT_65_iso": {
-        "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
-      }
-    }
-  }

keyboards/capsunlocked/cu65/keymaps/default/keymap.c

@@ -1,62 +0,0 @@
-/*
-Copyright 2020 CapsUnlocked
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_65_ansi(
-    /*
-     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
-     * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│Ins│
-     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
-     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │Del│
-     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
-     * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │  Enter │Pg+│
-     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-     * │  Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift│ ↑ │Pg-│
-     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
-     * │Ctrl│LGUI│LAlt│         Space          │RAlt│ L1 │ │ ← │ ↓ │ → │
-     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
-     */
-        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
-        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
-        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
-        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                             KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-    [1] = LAYOUT_65_ansi(
-    /*
-     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
-     * │RST│ F1│ F2│ F3│ F4│ F5│ F6│ F7│ F8│ F9│F10│F11│F12│       │   │
-     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
-     * │     │   │   │   │   │   │   │   │   │   │   │   │   │     │   │
-     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
-     * │      │   │   │   │   │   │   │   │   │   │   │   │        │   │
-     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-     * │        │   │   │   │   │   │   │   │   │   │   │      │   │   │
-     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
-     * │    │    │    │                        │    │    │ │   │   │   │
-     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
-     */
-        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                   _______,                            _______, _______,          _______, _______, _______
-    ),
-};
-

keyboards/capsunlocked/cu65/keymaps/default/readme.md

@@ -1 +0,0 @@
-# The default ANSI keymap for CU65

keyboards/capsunlocked/cu65/keymaps/iso/keymap.c

@@ -1,61 +0,0 @@
-/*
-Copyright 2020 CapsUnlocked
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_65_iso(
-    /*
-     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
-     * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│Ins│
-     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
-     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │     │Del│
-     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ Ent├───┤
-     * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │    │Pg+│
-     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤
-     * │Shft│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift│ ↑ │Pg-│
-     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
-     * │Ctrl│LGUI│LAlt│         Space          │RAlt│ L1 │ │ ← │ ↓ │ → │
-     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
-     */
-        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_DEL,
-        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,  KC_PGUP,
-        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
-        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                             KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-    [1] = LAYOUT_65_iso(
-    /*
-     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
-     * │RST│ F1│ F2│ F3│ F4│ F5│ F6│ F7│ F8│ F9│F10│F11│F12│       │   │
-     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
-     * │     │   │   │   │   │   │   │   │   │   │   │   │   │     │   │
-     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    ├───┤
-     * │      │   │   │   │   │   │   │   │   │   │   │   │   │    │   │
-     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤
-     * │    │   │   │   │   │   │   │   │   │   │   │   │      │   │   │
-     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
-     * │    │    │    │                        │    │    │ │   │   │   │
-     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
-     */
-        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                   _______,                            _______, _______,          _______, _______, _______
-    ),
-};

keyboards/capsunlocked/cu65/keymaps/iso/readme.md

@@ -1 +0,0 @@
-# The ISO keymap for CU65

keyboards/capsunlocked/cu65/keymaps/via/keymap.c

@@ -1,47 +0,0 @@
-/* Copyright 2020 CapsUnlocked
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_all(
-        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_INS,
-        KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
-        KC_CAPS,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT,  KC_PGUP,
-        KC_LSFT,          KC_NUHS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
-        KC_LCTL, KC_LALT, KC_LGUI,                            KC_SPC,                             KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-    [1] = LAYOUT_all(
-        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______
-    ),
-    [2] = LAYOUT_all(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______
-    ),
-    [3] = LAYOUT_all(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______
-    ),
-};

keyboards/capsunlocked/cu65/keymaps/via/rules.mk

@@ -1 +0,0 @@
-VIA_ENABLE = yes

keyboards/capsunlocked/cu65/readme.md

@@ -1,13 +0,0 @@
-# CU65
-
-The CU65 is a customisable 65% that supports hotswap ISO and ANSI layouts on the same PCB.
-
-* Keyboard maintainer: [rys](https://github.com/rys)
-* Hardware supported: CU65 r2
-* Hardware availability: [CapsUnlocked](https://caps-unlocked.com/cu65-r2/)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make capsunlocked/cu65:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/capsunlocked/cu65/rules.mk

@@ -1,24 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
-AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = 65_ansi 65_iso

keyboards/capsunlocked/readme.md

@@ -1,3 +0,0 @@
-# CapsUnlocked keyboards
-
-Home of the firmware for CapsUnlocked keyboards!

keyboards/cheshire/curiosity/keymaps/madhatter/keymap.c

@@ -25,7 +25,6 @@ enum my_layers {
 #define FNMS MO(_FNMS)
 #define NAVMED MO(_NAVMED)
 #define CAP_CTL CTL_T(KC_CAPS)
-#define GUI_BSPC LCMD_T(KC_BSPC)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_QWERTY] = LAYOUT_default(
@@ -33,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_PGUP, KC_TAB,  KC_Q,  KC_W,    KC_E,   KC_R,    KC_T,         KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
     KC_PGDN, CAP_CTL, KC_A,  KC_S,    KC_D,   KC_F,    KC_G,         KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
              KC_LSFT, KC_Z,  KC_X,    KC_C,   KC_V,    KC_B,         KC_B,   KC_N,  KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, FNMS,
-             KC_LCTL,              KC_LALT,   GUI_BSPC, NAVMED,       KC_SPC,        KC_RALT,                              KC_RCTL
+             KC_LCTL,              KC_LALT,    KC_LCMD, NAVMED,       KC_SPC,        KC_RALT,                              KC_RCTL
   ),
 
   [_FNMS] = LAYOUT_default(

keyboards/cheshire/curiosity/keymaps/madhatter/rules.mk

@@ -1,2 +1 @@
-VIA_ENABLE = yes
-VELOCIKEY_ENABLE = yes
+VELOCIKEY_ENABLE = yes

keyboards/cheshire/curiosity/keymaps/via/keymap.c

@@ -1,56 +0,0 @@
-/*
-Copyright 2019 Khader Syed
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include QMK_KEYBOARD_H
-
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_default(
-    KC_ESC,  	KC_TILD, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
-    KC_PGUP, 	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,             KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-    KC_PGDN, 	KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,             KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
-				KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,             KC_B,   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RGUI,
-				KC_LCTL,          KC_LALT, KC_SPC,  MO(1),                          KC_SPC,           KC_RALT,          KC_RCTL
-  ),
-  [1] = LAYOUT_default(
-    KC_TRNS,  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS,  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-				KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-				KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,          KC_TRNS,          KC_TRNS
-  ),
-  [2] = LAYOUT_default(
-    KC_TRNS,  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS,  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-				KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-				KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,          KC_TRNS,          KC_TRNS
-  ),
-  [3] = LAYOUT_default(
-    KC_TRNS,  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS,  	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-				KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-				KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,          KC_TRNS,          KC_TRNS
-  )
-
-};

keyboards/cheshire/curiosity/keymaps/via/rules.mk

@@ -1 +0,0 @@
-VIA_ENABLE=yes

keyboards/crkbd/keymaps/madhatter/config.h

@@ -1,46 +1,18 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
 #pragma once
 
-//#define USE_MATRIX_I2C
-
-/* Select hand configuration */
-
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
+#define EE_HANDS
 
 #define SSD1306OLED
 
-#define USE_SERIAL_PD2
-
-#define TAPPING_FORCE_HOLD
-#define TAPPING_TERM 100
-
 #ifdef RGBLIGHT_ENABLE
-    #undef RGBLED_NUM
-    #define RGBLIGHT_ANIMATIONS
-    #define RGBLED_NUM 27
-    #define RGBLIGHT_LIMIT_VAL 120
-    #define RGBLIGHT_HUE_STEP 10
-    #define RGBLIGHT_SAT_STEP 17
-    #define RGBLIGHT_VAL_STEP 17
+#    undef RGBLED_NUM
+#    define RGBLIGHT_ANIMATIONS
+#    define RGBLED_NUM 27
+#    define RGBLIGHT_LIMIT_VAL 120
+#    define RGBLIGHT_HUE_STEP 10
+#    define RGBLIGHT_SAT_STEP 17
+#    define RGBLIGHT_VAL_STEP 17
 #endif
+
+#undef PRODUCT
+#define PRODUCT MadHatter Hacked Corne Keyboard

keyboards/crkbd/keymaps/madhatter/keymap.c

@@ -1,96 +1,112 @@
-/*
-Copyright 2019 @foostan
-Copyright 2020 Drashna Jaelre <@drashna>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
 #include QMK_KEYBOARD_H
 
+
+#ifdef OLED_DRIVER_ENABLE
+#    define KEYLOGGER_LENGTH 5
+static uint32_t oled_timer                       = 0;
+static char     keylog_str[KEYLOGGER_LENGTH + 1] = {"\n"};
+static uint16_t log_timer                        = 0;
+// clang-format off
+static const char PROGMEM code_to_name[0xFF] = {
+//   0    1    2    3    4    5    6    7    8    9    A    B    c    D    E    F
+    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l',  // 0x
+    'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2',  // 1x
+    '3', '4', '5', '6', '7', '8', '9', '0',  20,  19,  27,  26,  22, '-', '=', '[',  // 2x
+    ']','\\', '#', ';','\'', '`', ',', '.', '/', 128, ' ', ' ', ' ', ' ', ' ', ' ',  // 3x
+    ' ', ' ', ' ', ' ', ' ', ' ', 'P', 'S', ' ', ' ', ' ', ' ',  16, ' ', ' ', ' ',  // 4x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 5x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 6x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 7x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 8x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 9x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Ax
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Bx
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Cx
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Dx
+    'C', 'S', 'A', 'C', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Ex
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' '        // Fx
+};
+
+void add_keylog(uint16_t keycode);
+#endif
+
 extern uint8_t is_master;
 
 enum corny_layers {
-  _QWERTY,
-  _LOWER,
-  _RAISE,
-  _ADJUST
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
 };
 
-enum corny_keycodes {
+enum custom_keycodes {
   QWERTY = SAFE_RANGE,
   LOWER,
   RAISE,
   ADJUST,
-  BACKLIT,
   RGBRST
 };
 
-enum macro_keycodes {
-  KC_SAMPLEMACRO,
-};
+#define LY_LWR MO(_LOWER)
+#define LY_RSE MO(_RAISE)
+
+#define KY_CESC LCTL_T(KC_ESC)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_split_3x6_3(
+  [_QWERTY] = LAYOUT(
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-       KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                         KC_Y,    KC_U,    KC_I,    KC_O,   KC_P,  KC_BSPC,
+       KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                         KC_Y,    KC_U,    KC_I,    KC_O,   KC_P,  KC_BSPC,
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      KC_LCTL,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                         KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,\
+      KC_LCTL,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                         KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                         KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH, KC_ENT ,
+      KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                         KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH, KC_ENT,
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
-                                          KC_LCTL,  LOWER, KC_BSPC,     KC_SPC,  RAISE,  KC_RCMD
+                                          KC_LALT,  LY_LWR, KC_LCMD,     KC_SPC,  LY_RSE,  KC_ENT
                                       //`--------------------------'  `--------------------------'
 
   ),
 
-  [_LOWER] = LAYOUT_split_3x6_3(
+  [_LOWER] = LAYOUT(
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-       KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                         KC_6,    KC_7,    KC_8,    KC_9,    KC_0, KC_BSPC,
+       KC_ESC, KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC,                      KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_LEFT, KC_DOWN,   KC_UP,KC_RIGHT, XXXXXXX, XXXXXXX,
-  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
-                                          KC_TRNS,  LOWER, KC_TRNS,    KC_TRNS,   RAISE, KC_TRNS
-                                      //`--------------------------'  `--------------------------'
-    ),
-
-  [_RAISE] = LAYOUT_split_3x6_3(
-  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-       KC_ESC, KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC,                      KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
-  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_MINS,  KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE,  KC_GRV,
+      KC_LCTL, XXXXXXX, KC_LEFT, KC_DOWN,   KC_UP,KC_RIGHT,                      KC_MINS,  KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV,
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
       KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD,
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
-                                          KC_TRNS,  LOWER, KC_BSPC,    KC_TRNS,   RAISE, KC_TRNS
+                                          KC_LALT,  LY_LWR, KC_LCMD,     KC_SPC,  LY_RSE, KC_ENT
                                       //`--------------------------'  `--------------------------'
   ),
 
-  [_ADJUST] = LAYOUT_split_3x6_3(
+  [_RAISE] = LAYOUT(
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-      XXXXXXX,  RGBRST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+       KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                         KC_6,    KC_7,    KC_8,    KC_9,    KC_0, KC_DEL,
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+      KC_LCTL, XXXXXXX, KC_PGUP, KC_HOME,   KC_END,KC_PGDN,                      KC_MINS,  KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV,
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   RESET,
+      KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD,
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
-                                          KC_TRNS,  LOWER, KC_TRNS,    KC_TRNS,   RAISE, KC_TRNS
+                                          KC_LALT,  LY_LWR, KC_LCMD,     KC_SPC,  LY_RSE, KC_ENT
+                                      //`--------------------------'  `--------------------------'
+    ),
+
+  [_ADJUST] = LAYOUT(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+        RESET, KC_BTN1, KC_MS_U, KC_BTN2, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, XXXXXXX,                      RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      XXXXXXX,  RGBRST, EEP_RST, AG_TOGG, XXXXXXX, XXXXXXX,                      RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LALT,  LY_LWR, KC_LCMD,     KC_SPC,  LY_RSE, KC_ENT
                                       //`--------------------------'  `--------------------------'
   )
 };
 
+layer_state_t layer_state_set_user(layer_state_t state) {
+    return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
 int RGB_current_mode;
 
 // Setting ADJUST layer RGB back to default
@@ -169,11 +185,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
 
   switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-       set_single_persistent_default_layer(_QWERTY);
-      }
-      break;
     case LOWER:
       if (record->event.pressed) {
         layer_on(_LOWER);
@@ -199,24 +210,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
           layer_off(_ADJUST);
         }
         return false;
-    case RGB_MOD:
-      #ifdef RGBLIGHT_ENABLE
-        if (record->event.pressed) {
-          rgblight_mode(RGB_current_mode);
-          rgblight_step();
-          RGB_current_mode = rgblight_get_mode();
-        }
-      #endif
-      return false;
-    case RGBRST:
-      #ifdef RGBLIGHT_ENABLE
-        if (record->event.pressed) {
-          eeconfig_update_rgblight_default();
-          rgblight_enable();
-          RGB_current_mode = rgblight_get_mode();
-        }
-      #endif
-      break;
   }
   return true;
 }

keyboards/crkbd/keymaps/madhatter/rules.mk

@@ -1,10 +1,11 @@
+BOOTLOADER = atmel-dfu # Elite-C
+
+MOUSEKEY_ENABLE = yes
+RGBLIGHT_ENABLE = yes
 
 # If you want to change the display of OLED, you need to change here
 SRC +=  ./lib/glcdfont.c \
         ./lib/rgb_state_reader.c \
         ./lib/layer_state_reader.c \
         ./lib/logo_reader.c \
-        ./lib/keylogger.c \
-        # ./lib/mode_icon_reader.c \
-        # ./lib/host_led_state_reader.c \
-        # ./lib/timelogger.c \
+        ./lib/keylogger.c

keyboards/ergodox_infinity/board_st7565.h

@@ -8,88 +8,105 @@
 #ifndef _GDISP_LLD_BOARD_H
 #define _GDISP_LLD_BOARD_H
 
-#include "quantum.h"
-
-#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
-#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER 0, 1, 2, 3
+#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
+#define ST7565_ADC              ST7565_ADC_NORMAL
+#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
+#define ST7565_PAGE_ORDER       0,1,2,3
 /*
  * Custom page order for several LCD boards, e.g. HEM12864-99
  * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
  */
 
-#define ST7565_A0_PIN C7
-#define ST7565_RST_PIN C8
-#define ST7565_MOSI_PIN C6
-#define ST7565_SCLK_PIN C5
-#define ST7565_SS_PIN C4
+#define ST7565_GPIOPORT GPIOC
+#define ST7565_PORT PORTC
+#define ST7565_A0_PIN 7
+#define ST7565_RST_PIN 8
+#define ST7565_MOSI_PIN 6
+#define ST7565_SLCK_PIN 5
+#define ST7565_SS_PIN 4
 
+#define palSetPadModeRaw(portname, bits) \
+    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+
+#define palSetPadModeNamed(portname, portmode) \
+    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+
+#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
 // DSPI Clock and Transfer Attributes
 // Frame Size: 8 bits
 // MSB First
 // CLK Low by default
 static const SPIConfig spi1config = {
-    // Operation complete callback or @p NULL.
-    .end_cb = NULL,
-    // The chip select line port - when not using pcs.
-    .ssport = PAL_PORT(ST7565_SS_PIN),
-    // brief The chip select line pad number - when not using pcs.
-    .sspad = PAL_PAD(ST7565_SS_PIN),
-    // SPI initialization data.
-    .tar0 = SPIx_CTARn_FMSZ(7)     // Frame size = 8 bytes
-            | SPIx_CTARn_ASC(1)    // After SCK Delay Scaler (min 50 ns) = 55.56ns
-            | SPIx_CTARn_DT(0)     // Delay After Transfer Scaler (no minimum)= 27.78ns
-            | SPIx_CTARn_CSSCK(0)  // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
-            | SPIx_CTARn_PBR(0)    // Baud Rate Prescaler = 2
-            | SPIx_CTARn_BR(0)     // Baud rate (min 50ns) = 55.56ns
+   // Operation complete callback or @p NULL.
+  .end_cb = NULL,
+   //The chip select line port - when not using pcs.
+  .ssport = ST7565_GPIOPORT,
+   // brief The chip select line pad number - when not using pcs.
+  .sspad=ST7565_SS_PIN,
+   // SPI initialization data.
+  .tar0 =
+    SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
+    | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
+    | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
+    | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
+    | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
+    | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
 };
 
 static GFXINLINE void acquire_bus(GDisplay *g) {
-    (void)g;
+    (void) g;
     // Only the LCD is using the SPI bus, so no need to acquire
     // spiAcquireBus(&SPID1);
     spiSelect(&SPID1);
 }
 
 static GFXINLINE void release_bus(GDisplay *g) {
-    (void)g;
+    (void) g;
     // Only the LCD is using the SPI bus, so no need to release
-    // spiReleaseBus(&SPID1);
+    //spiReleaseBus(&SPID1);
     spiUnselect(&SPID1);
 }
 
 static GFXINLINE void init_board(GDisplay *g) {
-    (void)g;
-    setPinOutput(ST7565_A0_PIN);
-    writePinHigh(ST7565_A0_PIN);
-    setPinOutput(ST7565_RST_PIN);
-    writePinHigh(ST7565_RST_PIN);
-    setPinOutput(ST7565_SS_PIN);
-
-    palSetPadMode(PAL_PORT(ST7565_MOSI_PIN), PAL_PAD(ST7565_MOSI_PIN), PAL_MODE_ALTERNATIVE_2);
-    palSetPadMode(PAL_PORT(ST7565_SCLK_PIN), PAL_PAD(ST7565_SCLK_PIN), PAL_MODE_ALTERNATIVE_2);
+    (void) g;
+    palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+    palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
+    palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
+    palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
 
     spiInit();
     spiStart(&SPID1, &spi1config);
     release_bus(g);
 }
 
-static GFXINLINE void post_init_board(GDisplay *g) { (void)g; }
+static GFXINLINE void post_init_board(GDisplay *g) {
+    (void) g;
+}
 
 static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
-    (void)g;
-    writePin(ST7565_RST_PIN, !state);
+    (void) g;
+    if (state) {
+        palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
+    else {
+        palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
 }
 
-static GFXINLINE void write_cmd(GDisplay *g, gU8 cmd) {
-    (void)g;
-    writePinLow(ST7565_A0_PIN);
-    spiSend(&SPID1, 1, &cmd);
+static GFXINLINE void enter_data_mode(GDisplay *g) {
+    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
 }
 
-static GFXINLINE void write_data(GDisplay *g, gU8 *data, gU16 length) {
-    (void)g;
-    writePinHigh(ST7565_A0_PIN);
+static GFXINLINE void enter_cmd_mode(GDisplay *g) {
+    palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+    (void) g;
     spiSend(&SPID1, length, data);
 }
 

keyboards/ferris/keymaps/madhatter/config.h

@@ -1,22 +0,0 @@
-/*
-Copyright 2020 Pierre Chevalier <pierrechevalier83@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-// Pick good defaults for enabling homerow modifiers
-#define TAPPING_TERM 200
-#define IGNORE_MOD_TAP_INTERRUPT

keyboards/ferris/keymaps/madhatter/keymap.c

@@ -1,57 +0,0 @@
-// this is the style you want to emulate.
-// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
-
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-enum ferris_layers {
-  _QWERTY,
-  _LOWER,
-  _RAISE
-};
-
-enum ferris_tap_dances {
-  TD_Q_ESC
-};
-
-#define KC_CTSC RCTL_T(KC_SCLN)
-#define KC_CTLA LCTL_T(KC_A)
-#define KC_LSHZ LSFT_T(KC_Z)
-#define KC_RLSH RSFT_T(KC_SLSH)
-#define KC_SPM2 LT(2, KC_SPC)
-#define KC_BSM1 LT(1, KC_BSPC)
-#define KC_GUTA GUI_T(KC_TAB)
-#define KC_CLGV CTL_T(KC_GRV)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT( /* QWERTY */
-    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,            KC_Y,    KC_U,  KC_I,    KC_O,   KC_P,
-    KC_CTLA, KC_S,    KC_D,    KC_F,    KC_G,            KC_H,    KC_J,  KC_K,    KC_L,   KC_SCLN,
-    KC_LSHZ, KC_X,    KC_C,    KC_V,    KC_B,            KC_N,    KC_M,  KC_COMM, KC_DOT, KC_RLSH,
-                                    KC_CLGV, KC_BSM1, KC_SPM2, KC_GUTA
-  ),
-
-  [_LOWER] = LAYOUT( /* [> LOWER <] */
-    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,            KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
-    KC_GESC, KC_HOME, KC_PGDN, KC_PGUP, KC_END,          KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_QUOT,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,         KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_ENT,
-                                    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  
-  ),
-
-  [_RAISE] = LAYOUT( /* [> RAISE <] */
-    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,           KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,
-    KC_TAB,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_PIPE,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_UNDS, KC_PLUS, KC_TRNS, KC_TRNS, RESET,
-                                    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
-  )
-};
-
-// Tap Dance Definitions
-qk_tap_dance_action_t tap_dance_actions[] = {
-    // Tap once for Q, twice for ESC
-    [TD_Q_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC)
-};

keyboards/ferris/keymaps/madhatter/rules.mk

@@ -1,2 +0,0 @@
-BOOTMAGIC_ENABLE = lite
-TAP_DANCE_ENABLE = yes

keyboards/lazydesigners/dimpleplus/keymaps/via/keymap.c

@@ -1,48 +0,0 @@
-/* Copyright 2020 LAZYDESIGNERS
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
- 
- #include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT(
-                KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
-                KC_GRV,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-                KC_TAB,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
-                KC_LSFT,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_UP,   MO(1),
-                KC_LCTL,   KC_LALT, KC_LGUI, KC_SPC,           KC_SPC,           KC_LEFT, KC_DOWN, KC_RGHT
-                ),
-	[1] = LAYOUT(
-                RESET,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,            KC_NO,            KC_NO,   KC_NO,   KC_NO
-                ),
-	[2] = LAYOUT(
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,            KC_NO,            KC_NO,   KC_NO,   KC_NO
-                ),
-	[3] = LAYOUT(
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   
-                KC_NO,     KC_NO,   KC_NO,   KC_NO,            KC_NO,            KC_NO,   KC_NO,   KC_NO
-                ),
-};

keyboards/lazydesigners/dimpleplus/keymaps/via/rules.mk

@@ -1,2 +0,0 @@
-VIA_ENABLE = yes
-LTO_ENABLE = yes

keyboards/lucid/phantom_hs/config.h

@@ -1,105 +0,0 @@
-/*
-Copyright 2020 <hello@lucidkb.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID    0x7667 // Lucid
-#define PRODUCT_ID   0x0001 // Phantom
-#define DEVICE_VER   0x0001 // Version 1
-#define MANUFACTURER    Lucid
-#define PRODUCT         Phantom
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-
-// Checked with Eagle Schematic
-#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 }
-#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6, C6 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* Define Indicator LED's */
-#define LED_CAPS_LOCK_PIN C7
-
-/* Define less important options */
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION

keyboards/lucid/phantom_hs/info.json

@@ -1,84 +0,0 @@
-{
-    "keyboard_name": "Phantom",
-    "url": "http://www.lucidkb.com",
-    "maintainer": "Lucid",
-    "width": 16,
-    "height": 5,
-    "layouts": {
-        "LAYOUT_65_ansi_blocker": {
-            "layout": [
-                {"x": 0, "y": 0},
-                {"x": 1, "y": 0},
-                {"x": 2, "y": 0},
-                {"x": 3, "y": 0},
-                {"x": 4, "y": 0},
-                {"x": 5, "y": 0},
-                {"x": 6, "y": 0},
-                {"x": 7, "y": 0},
-                {"x": 8, "y": 0},
-                {"x": 9, "y": 0},
-                {"x": 10, "y": 0},
-                {"x": 11, "y": 0},
-                {"x": 12, "y": 0},
-                {"x": 13, "y": 0, "w": 2},
-                {"x": 15, "y": 0},
-
-                {"x": 0, "y": 1, "w": 1.5},
-                {"x": 1.5, "y": 1},
-                {"x": 2.5, "y": 1},
-                {"x": 3.5, "y": 1},
-                {"x": 4.5, "y": 1},
-                {"x": 5.5, "y": 1},
-                {"x": 6.5, "y": 1},
-                {"x": 7.5, "y": 1},
-                {"x": 8.5, "y": 1},
-                {"x": 9.5, "y": 1},
-                {"x": 10.5, "y": 1},
-                {"x": 11.5, "y": 1},
-                {"x": 12.5, "y": 1},
-                {"x": 13.5, "y": 1, "w": 1.5},
-                {"x": 15, "y": 1},
-
-                {"x": 0, "y": 2, "w": 1.75},
-                {"x": 1.75, "y": 2},
-                {"x": 2.75, "y": 2},
-                {"x": 3.75, "y": 2},
-                {"x": 4.75, "y": 2},
-                {"x": 5.75, "y": 2},
-                {"x": 6.75, "y": 2},
-                {"x": 7.75, "y": 2},
-                {"x": 8.75, "y": 2},
-                {"x": 9.75, "y": 2},
-                {"x": 10.75, "y": 2},
-                {"x": 11.75, "y": 2},
-                {"x": 12.75, "y": 2, "w": 2.25},
-                {"x": 15, "y": 2},
-
-                {"x": 0, "y": 3, "w": 2.25},
-                {"x": 2.25, "y": 3},
-                {"x": 3.25, "y": 3},
-                {"x": 4.25, "y": 3},
-                {"x": 5.25, "y": 3},
-                {"x": 6.25, "y": 3},
-                {"x": 7.25, "y": 3},
-                {"x": 8.25, "y": 3},
-                {"x": 9.25, "y": 3},
-                {"x": 10.25, "y": 3},
-                {"x": 11.25, "y": 3},
-                {"x": 12.25, "y": 3, "w": 1.75},
-                {"x": 14, "y": 3},
-                {"x": 15, "y": 3},
-
-                {"x": 0, "y": 4, "w": 1.25},
-                {"x": 1.25, "y": 4, "w": 1.25},
-                {"x": 2.5, "y": 4, "w": 1.25},
-                {"x": 3.75, "y": 4, "w": 6.25},
-                {"x": 10, "y": 4, "w": 1.25},
-                {"x": 11.25, "y": 4, "w": 1.25},
-                {"x": 13, "y": 4},
-                {"x": 14, "y": 4},
-                {"x": 15, "y": 4}
-            ]
-        }
-    }
-}

keyboards/lucid/phantom_hs/keymaps/default/keymap.c

@@ -1,39 +0,0 @@
-/*
-Copyright 2020 <hello@lucidkb.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-enum layers {
-    _LAYER0,
-    _LAYER1,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    [_LAYER0] = LAYOUT_65_ansi_blocker(
-        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
-        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, 
-        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, 
-        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, 
-        KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-
-    [_LAYER1] = LAYOUT_65_ansi_blocker(
-        KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_DEL, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, KC_PGUP,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_AUDIO_VOL_UP, KC_AUDIO_MUTE, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MEDIA_PREV_TRACK, KC_AUDIO_VOL_DOWN, KC_MEDIA_NEXT_TRACK
-    )
-};

keyboards/lucid/phantom_hs/keymaps/via/keymap.c

@@ -1,58 +0,0 @@
-/*
-Copyright 2020 <hello@lucidkb.org>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-enum layers {
-    _LAYER0,
-    _LAYER1,
-    _LAYER2,
-    _LAYER3,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    [_LAYER0] = LAYOUT_65_ansi_blocker(
-        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
-        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, 
-        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, 
-        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, 
-        KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-
-    [_LAYER1] = LAYOUT_65_ansi_blocker(
-        KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_DEL, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, KC_PGUP,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_AUDIO_VOL_UP, KC_AUDIO_MUTE, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MEDIA_PREV_TRACK, KC_AUDIO_VOL_DOWN, KC_MEDIA_NEXT_TRACK
-    ),
-
-    [_LAYER2] = LAYOUT_65_ansi_blocker(
-        KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, 
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
-    ),
-
-    [_LAYER3] = LAYOUT_65_ansi_blocker(
-        KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, 
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
-    ),
-
-};

keyboards/lucid/phantom_hs/keymaps/via/rules.mk

@@ -1 +0,0 @@
-VIA_ENABLE = yes

keyboards/lucid/phantom_hs/phantom_hs.c

@@ -1,14 +0,0 @@
-/*
-Copyright 2020 <hello@lucidkb.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#include "phantom_hs.h"

keyboards/lucid/phantom_hs/phantom_hs.h

@@ -1,32 +0,0 @@
-/*
-Copyright 2020 <hello@lucidkb.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "quantum.h"
-
-/* Phantom Keymap Definitions */
-#define LAYOUT_65_ansi_blocker( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,      K2E, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, \
-    K40, K41, K42,           K45,                K49, K4A,      K4C, K4D, K4E \
-) { \
-    { K00, K01, K02, K03,   K04,     K05,   K06,   K07,   K08,   K09, K0A, K0B,   K0C,   K0D,   K0E }, \
-    { K10, K11, K12, K13,   K14,     K15,   K16,   K17,   K18,   K19, K1A, K1B,   K1C,   K1D,   K1E }, \
-    { K20, K21, K22, K23,   K24,     K25,   K26,   K27,   K28,   K29, K2A, K2B,   K2C,   KC_NO, K2E }, \
-    { K30, K31, K32, K33,   K34,     K35,   K36,   K37,   K38,   K39, K3A, K3B,   KC_NO, K3D,   K3E }, \
-    { K40, K41, K42, KC_NO, KC_NO,   K45,   KC_NO, KC_NO, KC_NO, K49, K4A, KC_NO, K4C,   K4D,   K4E }  \
-}

keyboards/lucid/phantom_hs/readme.md

@@ -1,13 +0,0 @@
-# bolsa65
-
-The following is the QMK Firmware for the Phantom Hotswap PCB for [LucidKB](http://www.lucidkb.cm).
----
-
-* Keyboard Maintainer: Lucid
-* Hardware Supported: Phantom
-
-Make example for this keyboard (after setting up your build environment):
-
-    make lucid/phantom_hs:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/lucid/phantom_hs/rules.mk

@@ -1,28 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency
-F_CPU = 8000000
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
-AUDIO_ENABLE = no           # Audio output
-KEYBOARD_LOCK_ENABLE = yes
-
-LAYOUTS = 65_ansi_blocker

keyboards/massdrop/ctrl/keymaps/r-pufky/config.h

@@ -1,27 +0,0 @@
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-#define FORCE_NKRO
-
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
-#define RGB_MATRIX_STARTUP_VAL 100
-#define RGB_BACKLIGHT_COLOR_1 RGB_BLUE
-#define RGB_BACKLIGHT_COLOR_2 RGB_BLUE

keyboards/massdrop/ctrl/keymaps/r-pufky/keymap.c

@@ -1,138 +0,0 @@
-/* Copyright 2020 Robert Pufky <rpufky@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-enum ctrl_keycodes {
-    U_T_AUTO = SAFE_RANGE, // USB Extra Port Toggle Auto Detect / Always Active
-    U_T_AGCR,              // USB Toggle Automatic GCR control
-    DBG_TOG,               // DEBUG Toggle On / Off
-    DBG_MTRX,              // DEBUG Toggle Matrix Prints
-    DBG_KBD,               // DEBUG Toggle Keyboard Prints
-    DBG_MOU,               // DEBUG Toggle Mouse Prints
-    MD_BOOT,               // Restart into bootloader after hold timeout
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT(
-        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS,
-        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,   KC_INS,  KC_HOME, KC_PGUP,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,   KC_DEL,  KC_END,  KC_PGDN,
-        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
-        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                              KC_UP,
-        KC_NLCK, KC_LGUI, KC_LALT,                   KC_SPC,                             KC_RALT, MO(1),   KC_F24,  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-    [1] = LAYOUT(
-        KC_EJCT, KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,             KC_MUTE, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   KC_MPLY, KC_MSTP, KC_VOLU,
-        _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, U_T_AUTO,U_T_AGCR,_______, _______, _______, _______, _______,   KC_MPRV, KC_MNXT, KC_VOLD,
-        KC_CAPS, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______,
-        _______, RGB_TOG, _______, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______,                              KC_BRIU,
-        _______, _______, _______,                   _______,                            _______, _______, _______, _______,            KC_MRWD, KC_BRID, KC_MFFD
-    ),
-};
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
-  // https://old.reddit.com/r/MechanicalKeyboards/comments/by8zv9/editing_rgb_backlighting_with_qmk/
-  // https://docs.qmk.fm/#/feature_rgblight?id=colors
-  rgblight_sethsv(HSV_BLUE);
-  // Disable underglow by default
-  rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER);
-  rgb_matrix_set_color_all(0, 0, 0);
-};
-
-// Runs constantly in the background, in a loop.
-void matrix_scan_user(void) {
-};
-
-#define MODS_SHIFT  (get_mods() & MOD_MASK_SHIFT)
-#define MODS_CTRL   (get_mods() & MOD_MASK_CTRL)
-#define MODS_ALT    (get_mods() & MOD_MASK_ALT)
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-    static uint32_t key_timer;
-
-    switch (keycode) {
-        case U_T_AUTO:
-            if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
-                TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode");
-            }
-            return false;
-        case U_T_AGCR:
-            if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
-                TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode");
-            }
-            return false;
-        case DBG_TOG:
-            if (record->event.pressed) {
-                TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode");
-            }
-            return false;
-        case DBG_MTRX:
-            if (record->event.pressed) {
-                TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix");
-            }
-            return false;
-        case DBG_KBD:
-            if (record->event.pressed) {
-                TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard");
-            }
-            return false;
-        case DBG_MOU:
-            if (record->event.pressed) {
-                TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse");
-            }
-            return false;
-        case MD_BOOT:
-            if (record->event.pressed) {
-                key_timer = timer_read32();
-            } else {
-                if (timer_elapsed32(key_timer) >= 500) {
-                    reset_keyboard();
-                }
-            }
-            return false;
-        case RGB_TOG:
-            if (record->event.pressed) {
-              switch (rgb_matrix_get_flags()) {
-                case LED_FLAG_ALL: {
-                    rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER);
-                    rgb_matrix_set_color_all(0, 0, 0);
-                  }
-                  break;
-                case LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER: {
-                    rgb_matrix_set_flags(LED_FLAG_UNDERGLOW);
-                    rgb_matrix_set_color_all(0, 0, 0);
-                  }
-                  break;
-                case LED_FLAG_UNDERGLOW: {
-                    rgb_matrix_set_flags(LED_FLAG_NONE);
-                    rgb_matrix_disable_noeeprom();
-                  }
-                  break;
-                default: {
-                    rgb_matrix_set_flags(LED_FLAG_ALL);
-                    rgb_matrix_enable_noeeprom();
-                  }
-                  break;
-              }
-            }
-            return false;
-        default:
-            return true; //Process all other keycodes normally
-    }
-}

keyboards/massdrop/ctrl/keymaps/r-pufky/readme.md

@@ -1,33 +0,0 @@
-# Massdrop Ctrl r-pufky
-
-Gaming QOL improvments; enabling useful keys for left hand & in-game overlay usage.
-
-## Layers
-
-### Typing Layer
-
-![Typing Layer](https://i.imgur.com/qEBaupV.png)
-
-Layer optimized to enable useful keys for gaming without changing typing state, as well as specific
-in-game overlay keys.
-
-* Left Ctrl: Easier control key usage without always setting capslock.
-* Num Lock: Unique non visible character key for additional left-hand input options in game.
-* Fn: Enable layer 1, temporal.
-* F24: Unique non-visible F24 key; no windows function. Map to in-game overlays.
- 
-### Function Layer
-
-![Function Layer](https://i.imgur.com/UhcS0hV.png)
-
-* Purple: Media keys. Note CD Eject on Escape, and OSX Prev/Next on Arrows.
-* Blue: Keyboard adminstration. Toggle NKRO (N Key Rollover) and enable bootloader.
-* Orange: RGB Controls.
-* Red: Danger can break things! USB autodetect (always on) and USB GCR Auto control. 
-* Capslock: Now requires the use of the function key.
-* F13-F14: Extended function keys.
-* Bright+/-: Monitor Brightness.
-
-## GCR
-GCR is the Global Current Register. Holds the value for current delivered to the LEDs, it's 165
-default and has range 0-255. This should be auto managed.

keyboards/olkb/planck/ez/ez.h

@@ -17,7 +17,7 @@
 
 #include "planck.h"
 
-#ifdef KEYBOARD_planck_ez_glow
+#ifdef KEYBOARD_olkb_planck_ez_glow
 #    include "glow.h"
 #endif
 

keyboards/olkb/planck/keymaps/abishalom/keymap.c

@@ -175,12 +175,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         #ifdef BACKLIGHT_ENABLE
           backlight_step();
         #endif
-        #ifdef KEYBOARD_planck_rev5
+        #ifdef KEYBOARD_olkb_planck_rev5
           writePinLow(E6);
         #endif
       } else {
         unregister_code(KC_RSFT);
-        #ifdef KEYBOARD_planck_rev5
+        #ifdef KEYBOARD_olkb_planck_rev5
           writePinHigh(E6);
         #endif
       }