adds documentation for console in

docs/config_options.md

@@ -70,10 +70,6 @@ This is a C header file that is one of the first things included, and will persi
   * pin of the backlight - B5, B6, B7 use PWM, others use softPWM
 * `#define BACKLIGHT_LEVELS 3`
   * number of levels your backlight will have (not including off)
-* `#define BACKLIGHT_BREATHING`
-  * enables backlight breathing (only works with backlight pins B5, B6 and B7)
-* `#define BREATHING_PERIOD 6`
-  * the length of one backlight "breath" in seconds
 * `#define DEBOUNCING_DELAY 5`
   * the delay when reading the value of the pin (5 is default)
 * `#define LOCKING_SUPPORT_ENABLE`

docs/faq_keymap.md

@@ -127,7 +127,7 @@ https://github.com/tekezo/Karabiner/issues/403
 
 ## Esc and <code>&#96;</code> on a Single Key
 
-See the [Grave Escape](feature_grave_esc.md) feature.
+See the [Grave Escape](feature_grave_escape.md) feature.
 
 ## Arrow on Right Modifier Keys with Dual-Role
 This turns right modifier keys into arrow keys when the keys are tapped while still modifiers when the keys are hold. In TMK the dual-role function is dubbed **TAP**.

docs/feature_backlight.md

@@ -10,30 +10,8 @@ These keycodes control the backlight. Most keyboards use this for single color i
 |---------|------------------------------------------|
 |`BL_TOGG`|Turn the backlight on or off              |
 |`BL_STEP`|Cycle through backlight levels            |
-|`BL_ON`  |Set backlight to max brightness           |
-|`BL_OFF` |Turn backlight off                        |
+|`BL_x`   |Set a specific backlight level between 0-9|
+|`BL_ON`  |An alias for `BL_9`                       |
+|`BL_OFF` |An alias for `BL_0`                       |
 |`BL_INC` |Increase backlight level                  |
 |`BL_DEC` |Decrease backlight level                  |
-|`BL_BRTG`|Toggle backlight breathing				 |
-
-Note that for backlight breathing, you need to have `#define BACKLIGHT_BREATHING` in your config.h.
-
-## Configuration Options in `config.h`
-
-* `BACKLIGHT_PIN B7` defines the pin that controlls the LEDs. Unless you design your own keyboard, you don't need to set this.
-* `BACKLIGHT_LEVELS 3` defines the number of brightness levels (excluding OFF).
-* `BACKLIGHT_BREATHING` if defined, enables backlight breathing. Note that this is only available if `BACKLIGHT_PIN` is B5, B6 or B7.
-* `BREATHING_PERIOD 6` defines the length of one backlight "breath" in seconds.
-
-## Notes on Implementation
-
-To change the brightness when using pins B5, B6 or B7, the PWM (Pulse Width Modulation) functionality of the on-chip timer is used.
-The timer is a counter that counts up to a certain TOP value (`0xFFFF` set in ICR1) before resetting to 0.
-We also set an OCR1x register.
-When the counter reaches the value stored in that register, the PWM pin drops to low.
-The PWM pin is pulled high again when the counter resets to 0.
-Therefore, OCR1x basically sets the duty cycle of the LEDs and as such the brightness where `0` is the darkest and `0xFFFF` the brightest setting.
-
-To enable the breathing effect, we register an interrupt handler to be called whenever the counter resets (with `ISR(TIMER1_OVF_vect)`).
-In this handler, which gets called roughly 244 times per second, we compute the desired brightness using a precomputed brightness curve.
-To disable breathing, we can just disable the respective interrupt vector and reset the brightness to the desired level.

docs/feature_console_in.md

@@ -0,0 +1,26 @@
+# Console In
+
+The "Console" in QMK refers to PJRC's vendor page of `0xFF31` and usage page of `0x74` - this is mainly used for sending debug statements to the computer that can be read via the QMK Toolbox (recommended), or HID listen.
+
+When `#define CONSOLE_IN_ENABLE` is placed in the `config.h` file, the keyboard will also listen to messages sent to the keyboard, will be able to respond in a custom way, defined at the `quantum`, `kb`, or `user` level. A keymap's example might look like this:
+
+```c
+void process_console_data_user(uint8_t * data, uint8_t length) {
+  switch (data[0]) {
+    case 0x05:
+      print("Sending back a message to the computer\n");
+      break;
+  }
+}
+```
+
+Which will execute when a report is sent to the keyboard when the first byte is `0x05`.
+
+## Default actions (defined at the `quantum` level)
+
+When the first byte is:
+
+* `0x01`: Print "Saying hello\n" via the console, and play the audio on song
+* `0xFE`: Enter the bootloader - only works when `CONSOLE_IN_BOOTLOADER` is defined in the `config.h`
+
+This needs to be fleshed out a bit more with some sort of versioning.

docs/hardware_avr.md

@@ -101,9 +101,8 @@ By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are us
 
 ```
 #define BACKLIGHT_PIN B7
-#define BACKLIGHT_LEVELS 3
 #define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
+#define BACKLIGHT_LEVELS 3
 ```
 
 {% hint style='info' %}

keyboards/alu84/alu84.c

@@ -1,46 +0,0 @@
-/* Copyright 2017 @TurboMech /u/TurboMech <discord> @A9entOran9e#6134
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-
-#include "alu84.h"
-#include "rgblight.h"
-#include "action_layer.h"
-#include "quantum.h"
-#include "action.h"
-
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
-
-

keyboards/alu84/alu84.h

@@ -1,41 +0,0 @@
-/* Copyright 2017 @TurboMech /u/TurboMech <discord> @A9entOran9e#6134
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-
-#ifndef ALU84_H
-#define ALU84_H
-
-#include "quantum.h"
-
-
-
-#define KEYMAP( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       K315, \
-	K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411,       K413, K414, K415, \
-	K500, K501,       K503,             K506,                   K510, K511, K512, K513, K514, K515  \
-) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
-	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  K215 }, \
-	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  KC_NO, K315 }, \
-	{ K400,  KC_NO, K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  KC_NO, K413,  K414,  K415 }, \
-	{ K500,  K501,  KC_NO, K503,  KC_NO, KC_NO, K506,  KC_NO, KC_NO, KC_NO, K510,  K511,  K512,  K513,  K514,  K515 }  \
-}
-
-#endif

keyboards/alu84/config.h

@@ -1,76 +0,0 @@
-/* Copyright 2017 @TurboMech /u/TurboMech <discord> @A9entOran9e#6134
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef ALU84_CONFIG_H
-#define ALU84_CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    mechkeys.ca
-#define PRODUCT         ALU84
-#define DESCRIPTION     A 75% keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 16
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, B7 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, F5, D4, B1, B0, B5, B4, D7, D6, B3, F4, F6 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* number of backlight levels */
-#define BACKLIGHT_PIN B6
-#ifdef BACKLIGHT_PIN
-#define BACKLIGHT_LEVELS 3
-#endif
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-#define RGB_DI_PIN E2
-#ifdef RGB_DI_PIN
-#define RGBLED_NUM 16
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 10
-#define RGBLIGHT_VAL_STEP 10
-
-#define RGBLIGHT_ANIMATIONS
-
-#endif
-
-#endif

keyboards/alu84/keymaps/TurboMech/config.h

@@ -1,25 +0,0 @@
-/* Copyright 2017 @TurboMech /u/TurboMech <discord> @A9entOran9e#6134
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#define TAPPING_TOGGLE 2
-#include "../../config.h"
-
-// place overrides here
-
-#endif

keyboards/alu84/keymaps/TurboMech/keymap.c

@@ -1,182 +0,0 @@
-/* Copyright 2017 @TurboMech /u/TurboMech <discord> @A9entOran9e#6134
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-
-#include "alu84.h"
-#include "turbomech.h"
-
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
-#define _QWERTY 0 //BASE layer
-#define _FUNCTION 1 //Function layer
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* BL
- * ,- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -.
- * |   Esc   |   Scrn  |   Scrn  | Expose  |Launchpad|   Show  |Dock Hide|  Screen | Shortcut| Shortcut| Shortcut| Shortcut|   Play  |  Mute   | Vol Up  | Vol Down|
- * |         |Brght Up | Brght Dn|         |         | Desktop |  Toggle | Capture |         |         |         |         |   Pause |         |         |         |
- * |- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - -+- - - - -|
- * |    `    |    1    |    2    |    3    |    4    |    5    |    6    |    7    |    8    |    9    |    0    |    -    |    +    |     Backspace     |  POWER  |
- * |         |         |         |         |         |         |         |         |         |         |         |         |         |                   |         |
- * |- - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - +- - - - -|
- * |     TAB      |    Q    |    W    |    E    |    R    |    T    |    Y    |    U    |    I    |    O    |    P    |    [    |     ]   |      \       | Shortcut|
- * |              |         |         |         |         |         |         |         |         |         |         |         |         |              |         |
- * |- - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - - -+- - - - -|
- * |      CAPS       |    A    |    S    |    D    |    F    |    G    |    H    |    J    |    K    |    L    |    ;    |    '    |        Enter        |   Page  |
- * |                 |         |         |         |         |         |         |         |         |         |         |         |                     |    Up   |
- * |- - - - - - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - +- - - - -+- - - - -+
- * |        Shift         |    Z    |    X    |    C    |    V    |    B    |    N    |    M    |    ,    |    .    |    /    |     Shift      |   Up    |  Page   |
- * |                      |         |         |         |         |         |         |         |         |         |         |                |         |  Down   |
- * |- - - - - +- - - - - - +- - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -|
- * |  Control |   Option   |     Gui    |                             Space                            |   Gui   |   Opt   |    Fn   |  Left   |   Down  |  Right  |
- * |          |    /Alt    |            |                                                              |         |   Alt   |         |         |         |         |
- * `- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -'
- */
-
-	[_QWERTY] = KEYMAP(
-		KC_ESC, KC_F14, KC_F15, LCTL(KC_UP), LCTL(KC_L), KC_F11, LALT(LGUI(KC_D)), LCTL(KC_S), LCTL(LSFT(KC_O)), LCTL(LGUI(KC_1)), LCTL(LGUI(KC_2)), LCTL(LGUI(KC_3)), KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU,
-		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_POWER,
-		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, LCTL(LGUI(KC_N)),
-		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
-		KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, KC_PGDN,
-		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT),
-
-/* FN1 - SEE readme.md
- * ,- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -.
- * |   Quit  |   F1    |    F2   |   F3    |   F4    |   F5    |    F6   |   F7    |    F8   |    F9   |   F10   |   F11   |   F12   |  Trns   |  Trns   |   DFU   |
- * |   All   |         |         |         |         |         |         |         |         |         |         |         |         |         |         |  Reset  |
- * |- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - -+- - - - -|
- * |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |       Delete      |   Lock  |
- * |         |         |         |         |         |         |         |         |         |         |         |         |         |                   |Shortcut |
- * |- - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - +- - - - -|
- * |     Trns     |   RGB   |   RGB   |   RGB   |   RGB   | RGB Hue | RGB Hue | RGB Sat | RGB Sat |  Trns   |   Trns  |   Trns  |   Trns  |     Trns     |   Trns  |
- * |              |  Toggle |   Mode  | Increase| Decrease| Increase| Decrease| Increase| Decrease|         |         |         |         |              |         |
- * |- - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - - -+- - - - -|
- * |      Trns       |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |  Trns   |  Trns   |   Trns  |   Trns  |  Trns   |   Trns  |        Trns         |   Trns  |
- * |                 |         |         |         |         |         |         |         |         |         |         |         |                     |         |
- * |- - - - - - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - +- - - - -+- - - - -+
- * |         Trns         |Backlight|Backlight|Backlight|Backlight|   Trns  |  Trns   |   Trns  |   Trns  |   Trns  |   Trns  |     Trns       |  Trns   |  Trns   |
- * |                      |  Toggle | Increase| Decrease|   Step  |         |         |         |         |         |         |                |         |         |
- * |- - - - - +- - - - - - +- - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -|
- * |   Trns   |    Trns    |    Trns    |                             Trns                             |  Trns   |  Trns   |  Trns   |  Trns   |   Trns  |  Trns   |
- * |          |            |            |                                                              |         |         |         |         |         |         |
- * `- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -'
- */
-
-
-	[_FUNCTION] = KEYMAP(
-		LALT(LGUI(KC_Q)), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_RESET,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, LCTL(LALT(LGUI(KC_S))),
-		KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-	//switch (id) {
-   // case _FLIP:
-    //  if (record->event.pressed)
-
-          //SEND_STRING("(╯°□°）╯︵ ┻━┻");
-    //  }
-    //  return false;
-     // break;
- // }
-
-	return MACRO_NONE;
-};
-
-	switch (id) {
-
-	}
-	return MACRO_NONE;
-}
-
-
-
-void matrix_scan_user(void) {
-}
-
-void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
-	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
-	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
-}
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/alu84/keymaps/TurboMech/readme.md

@@ -1,93 +0,0 @@
-# This is u/TurboMech's keyboard layout for ALU84.  
-
-## It is designed for Mac OS, due to the specific functions I created.  
-
-### Here is the layout found in the keymap.c file.
-#####  I use shortcuts for the Function row (above number row) listed below
-  - Scrn Bright Up: F14
-  - Scrn Bright Down: F15
-  - Expose: LCTRL + Up 
-  - Launchpad: LCTRL + L
-  - Show Desktop: F11
-  - Show/Hide Dock: LALT + LGUI + D
-  - Screen Capture: LCTRL + S
-  - Custom Shortcut (setup for an application I use frequently): LCTRL + LSHFT + O
-  - Custom Shortcut 1: LCTRL + LGUI + 1
-  - Custom Shortcut 2: LCTRL + LGUI + 2
-  - Custom Shortcut 3: LCTRL + LGUI + 3 
-    - use the custom shortcuts for whatever you want: launch an application, a macro, etc.
-  - Play/Pause: exactly that
-  - Mute / Volume Up / Volume Down: exactly what it says
-
- ##### Going down the right side from Vol Down:
-  - POWER: this serves as the power button on Mac's only.  Press and hold the button as you would on your Macbook or iMac keyboard.
-  - Menu: this slides the notification bar on the right side (its the same as on iPhones/ iPads) 
-
-### See below keymaps for how to setup shortcuts on Mac
-
-#### Base Layer
-```
-.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -. 
-|   Esc   |   Scrn  |   Scrn  | Expose  |Launchpad|   Show  |Dock Hide|  Screen | Shortcut| Shortcut| Shortcut| Shortcut|   Play  |  Mute   | Vol Up  | Vol Down|
-|         |Brght Up | Brght Dn|         |         | Desktop |  Toggle | Capture |         |         |         |         |   Pause |         |         |         |
-|- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - -+- - - - -|
-|    `    |    1    |    2    |    3    |    4    |    5    |    6    |    7    |    8    |    9    |    0    |    -    |    +    |     Backspace     |  POWER  | 
-|         |         |         |         |         |         |         |         |         |         |         |         |         |                   |         |
-|- - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - +- - - - -|
-|     TAB      |    Q    |    W    |    E    |    R    |    T    |    Y    |    U    |    I    |    O    |    P    |    [    |     ]   |      \       | Shortcut|
-|              |         |         |         |         |         |         |         |         |         |         |         |         |              |         |
-|- - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - - -+- - - - -|
-|      CAPS       |    A    |    S    |    D    |    F    |    G    |    H    |    J    |    K    |    L    |    ;    |    '    |        Enter        |   Page  |
-|                 |         |         |         |         |         |         |         |         |         |         |         |                     |    Up   |
-|- - - - - - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - +- - - - -+- - - - -+
-|        Shift         |    Z    |    X    |    C    |    V    |    B    |    N    |    M    |    ,    |    .    |    /    |     Shift      |   Up    |  Page   |
-|                      |         |         |         |         |         |         |         |         |         |         |                |         |  Down   |
-|- - - - - +- - - - - - +- - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -|
-|  Control |   Option   |     Gui    |                             Space                            |   Gui   |   Opt   |    Fn   |  Left   |   Down  |  Right  |
-|          |    /Alt    |            |                                                              |         |   Alt   |         |         |         |         |
-'- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -'
-```
-#### Function Layer 1 - See above for shortcuts
-```
-.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -.
-|   Quit  |   F1    |    F2   |   F3    |   F4    |   F5    |    F6   |   F7    |    F8   |    F9   |   F10   |   F11   |   F12   |  Trns   |  Trns   |   DFU   |
-|   All   |         |         |         |         |         |         |         |         |         |         |         |         |         |         |  Reset  |
-|- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - -+- - - - -|
-|   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |       Delete      |   Lock  | 
-|         |         |         |         |         |         |         |         |         |         |         |         |         |                   |Shortcut |
-|- - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - +- - - - -|
-|     Trns     |   RGB   |   RGB   |   RGB   |   RGB   | RGB Hue | RGB Hue | RGB Sat | RGB Sat |  Trns   |   Trns  |   Trns  |   Trns  |     Trns     |   Trns  | 
-|              |  Toggle |   Mode  | Increase| Decrease| Increase| Decrease| Increase| Decrease|         |         |         |         |              |         |
-|- - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - - - -+- - - - -|
-|      Trns       |   Trns  |   Trns  |   Trns  |   Trns  |   Trns  |  Trns   |  Trns   |   Trns  |   Trns  |  Trns   |   Trns  |        Trns         |   Trns  |
-|                 |         |         |         |         |         |         |         |         |         |         |         |                     |         |
-|- - - - - - - - - - - +- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - - - - - +- - - - -+- - - - -+
-|         Trns         |Backlight|Backlight|Backlight|Backlight|   Trns  |  Trns   |   Trns  |   Trns  |   Trns  |   Trns  |     Trns       |  Trns   |  Trns   |
-|                      |  Toggle | Increase| Decrease|   Step  |         |         |         |         |         |         |                |         |         |
-|- - - - - +- - - - - - +- - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -+- - - - -|
-|   Trns   |    Trns    |    Trns    |                             Trns                             |  Trns   |  Trns   |  Trns   |  Trns   |   Trns  |  Trns   |
-|          |            |            |                                                              |         |         |         |         |         |         |
-'- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -'
-```
-
-#### How to use/ setup shortcuts on Mac
-- First navigate to System Preferences > Keyboard > Shortcuts
-  - You can use any of them in here
-  - Just set them to the shortcut keys listed above
-
-#### How to make your own (to launch applications, quit all, etc.)
-- Navigate to Automator > New Document > click Service > Choose
-- Now we have to setup our shortcut
-  - Here's how to setup the Quit All Shortcut
-    - In the right window select the Service recieves dropdown > select No Input
-    - At the top left click the Name (Search) > type quit > click and hold Quit All Applications > drag to the right hand box (under the Service Recieves) 
-      - **IMPORTANT** You have to click the Run button at the upper right hand corner in order for these to actually work. 
-    - Now click File > Save > save it as Quit All Apps (or whatever you want) / you can also just exit out and it'll ask you if you want to save
-- Navigate back to System Preferences > Keyboard > Shortcuts
-    - The new shortcut can be found under services, set it to one of the shortcuts I listed above and done
-- The same applies for applications in the Name (search) just type the application you want to have as shortcut. Don't forget to run it, then do the same steps
-  to set it up as a shortcut.
-
-
-
-

keyboards/alu84/keymaps/TurboMech/rules.mk

@@ -1,15 +0,0 @@
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= no	# Console for debug(+400)
-COMMAND_ENABLE ?= no    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= yes
-UNICODE_ENABLE ?= yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/alu84/keymaps/default/keymap.c

@@ -1,144 +0,0 @@
-#include "alu84.h"
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
-#define _BL 0
-#define _FN1 1
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* BL
- * ,- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - .
- * | Esc | Scrn Brght Up | Scrn Bright Down | Expose | Launchpad | Show Desktop | Dock Hide Tog | Screen Capture | Shortcut | Shortcut | Shortcut| Shortcut | Play/Pause | Mute | Vol Up | Vol Down |
- * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
- * |  `  |       1       |         2        |    3   |     4     |      5       |      6        |        7       |     8    |     9    |     0   |    -     |    +    |   Backspace   |    POWER    |
- * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
- * |  TAB   |       Q       |        W       |    E    |     R     |      T       |      Y        |        U       |     I    |     O    |     P   |    [     |     ]      |      \      | Shortcut |
- * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
- * |    CAPS    |       A       |      S       |     D    |     F     |      G       |      H       |       J       |     K    |     L    |     ;   |    '     |          Enter          |   Pg Up  |
- * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
- * |     Shift     |      Z      |       X       |    C   |     V     |      B       |      N        |        M       |     ,    |     .    |     /   |     Shift      |       Up        |   Pg Dn  |
- * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
- * |   Control   |  Option/Alt  |     Gui     |                                                Space                              |   Gui   |   Opt   | Fn (layer) |   Left   |   Down  |   Right   |
- * `- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -'
- */
-
-	[_BL] = KEYMAP(
-		KC_ESC, KC_F14, KC_F15, LCTL(KC_UP), LCTL(KC_L), KC_F11, LALT(LGUI(KC_D)), LCTL(KC_S), LCTL(LSFT(KC_O)), LCTL(LGUI(KC_1)), LCTL(LGUI(KC_2)), LCTL(LGUI(KC_3)), KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, 
-		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_POWER, 	
-		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, LCTL(LGUI(KC_N)), 
-		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, 
-		KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, KC_PGDN, 
-		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT),
-
-/* FN1
- * ,- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - .
- * | Quit All |   F1   |    F2    |     F3      |     F4     |     F5      |      F6       |     F7    |    F8    |    F9    |   F10   |   F11   |   F12   |    Trns     |    Trns     |  DFU RESET |
- * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
- * |  Trns  |    Trns     |     Trns     |    Trns    |     Trns    |     Trns     |     Trns     |      Trns      |    Trns   |    Trns   |    Trns  |  Trns  |   Trns  |   DELETE  | Lock Shrct   |
- * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
- * |  Trns  |  RGB Toggle |  RGB Mode |  RGB Increase | RGB Decrease | RGB Hue Inc |  RGB Hue Dec  | RGB Sat Inc |   RGB Sat Dec |     Trns    |     Trns   |   Trns   |   Trns   |  Trns  |  Trns  |
- * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
- * |    Trns    |     Trns     |    Trns     |    Trns   |    Trns    |    Trns     |    Trns     |     Trns    |     Trns    |     Trns    |   Trns    |  Trns   |         Trns         |   Trns   |
- * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
- * |     Trns     | Backlight Tog | Backlight Inc | Backlight Dec | Backlight Step |   Trns    |   Trns   |   Trns   |   Trns   |    Trns    |    Trns   |    Trns    |       Trns        |  Trns   |
- * |- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -|
- * |    Trns    |    Trns    |     Trns    |                                                Trns                              |   Trns   |   Trns   |    Trns    |   Trns   |    Trns   |   Trns    |
- * `- - -+ - - - - - - - + - - - - - - - - -+ - - - -+ - - - - - + - - - - - - -+ - - - - - - - + - - - - - - - -+ - - - - -+ - - - - -+ - - - - + - - - - -+ - - - - - -+ - - -+ - - - -+ - - - - -'
- */
-
-	[_FN1] = KEYMAP(
-		LALT(LGUI(KC_Q)), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, RESET, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, LCTL(LALT(LGUI(KC_S))), 
-		KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-
-
-	switch (id) {
-
-	}
-	return MACRO_NONE;
-}
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-		
-	} else {
-		
-	}
-
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
-	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
-	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-		
-	} else {
-		
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-		
-	} else {
-		
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-		
-	} else {
-		
-	}
-
-}
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/alu84/readme.md

@@ -1,14 +0,0 @@
-ALU84
-===
-
-A 75% keyboard kit made and sold by mechkeys.ca [More info on mechkeys.ca](https://mechkeys.ca)
-
-Keyboard Maintainer: [TurboMech](https://github.com/TurboMech)
-Hardware Supported: ALU84
-Hardware Availability: [mechkeys.ca](https://mechkeys.ca)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make alu84:default
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/alu84/rules.mk

@@ -1,56 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= no	# Console for debug(+400)
-COMMAND_ENABLE ?= no    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= yes

keyboards/atomic/keymaps/pvc/keymap.c

@@ -345,14 +345,14 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case MACRO_BREATH_SPEED_INC:
             if (record->event.pressed)
             {
-                breathing_period_inc();
+                breathing_speed_inc(1);
             }
             break;
 
         case MACRO_BREATH_SPEED_DEC:
             if (record->event.pressed)
             {
-                breathing_period_dec();
+                breathing_speed_dec(1);
             }
             break;
 
@@ -374,7 +374,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             if (record->event.pressed)
             {
                 layer_on(LAYER_UPPER);
-                breathing_period_set(2);
+                breathing_speed_set(2);
                 breathing_pulse();
                 update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
             }
@@ -389,7 +389,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             if (record->event.pressed)
             {
                 layer_on(LAYER_LOWER);
-                breathing_period_set(2);
+                breathing_speed_set(2);
                 breathing_pulse();
                 update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
             }
@@ -403,13 +403,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case MACRO_FUNCTION:
             if (record->event.pressed)
             {
-                breathing_period_set(3);
+                breathing_speed_set(3);
                 breathing_enable();
                 layer_on(LAYER_FUNCTION);
             }
             else
             {
-                breathing_period_set(1);
+                breathing_speed_set(1);
                 breathing_self_disable();
                 layer_off(LAYER_FUNCTION);
             }

keyboards/bananasplit/config.h

@@ -42,7 +42,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MATRIX_HAS_GHOST
 
 /* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
+#define BACKLIGHT_LEVELS  1
 
 /* mapping backlight LEDs to correct Pin */
 #define BACKLIGHT_PIN B7

keyboards/bananasplit/keymaps/coloneljesus/config.h

@@ -21,7 +21,5 @@
 
 // place overrides here
 #define GRAVE_ESC_CTRL_OVERRIDE
-#define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 8
 
 #endif

keyboards/bananasplit/keymaps/coloneljesus/keymap.c

@@ -16,7 +16,7 @@
 #include "bananasplit.h"
 
 enum custom_keycodes {
-  WIN_SWITCH_LAYOUT = SAFE_RANGE,
+  WIN_SWITCH_LAYOUT = SAFE_RANGE
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -57,7 +57,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,  KC_F6,   KC_F7,         KC_F8,         KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, \
     KC_CAPS, KC_MPRV, KC_VOLU, KC_MNXT, KC_PGUP, KC_INS, KC_HOME, LCTL(KC_LEFT), LCTL(KC_RGHT), KC_END,  _______, _______, _______, KC_PSCR, \
     _______, KC_MUTE, KC_VOLD, KC_MPLY, KC_PGDN, KC_DEL, KC_LEFT, KC_DOWN,       KC_UP,         KC_RGHT, _______, _______, _______, \
-    _______,          BL_STEP, BL_BRTG, _______, _______,_______, LCTL(KC_BSPC), LCTL(KC_DEL),  _______, _______, _______, _______, _______, \
+    _______,          _______, _______, _______, _______,_______, LCTL(KC_BSPC), LCTL(KC_DEL),  _______, _______, _______, _______, _______, \
     _______, _______, _______,          _______, _______,_______,                _______,       _______, _______, _______, RESET \
 ),
 };
@@ -76,19 +76,19 @@ void matrix_scan_user(void) {
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
-
     case WIN_SWITCH_LAYOUT: {
       // Sends Alt+Shift on both key down and key up. 
       // Designed to switch between two keyboard layouts on Windows using a locking switch.
       // Does nothing if right shift is pressed for easy resync.
-      if (!(get_mods() & MOD_BIT(KC_RSFT)))
+      if (!(get_mods() & MOD_BIT(KC_RSFT))) {
         SEND_STRING(SS_DOWN(X_LALT)SS_TAP(X_LSHIFT)SS_UP(X_LALT));
-      return false;
+        return false;
+      }
+      else
+        return false;
     }
-
-    default:
-      return true;
   }
+  return true;
 }
 
 void led_set_user(uint8_t usb_led) {

keyboards/chibios_test/teensy_lc_onekey/Makefile.3.0

@@ -0,0 +1,77 @@
+# Target file name (without extension).
+PROJECT = ch
+
+# Directory common source files exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+MCU_LDSCRIPT = MK20DX128
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0
+#   - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = k20x5
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+BOARD = PJRC_TEENSY_3
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+
+include $(TMK_DIR)/tool/chibios/common.mk
+include $(TMK_DIR)/tool/chibios/chibios.mk

keyboards/chibios_test/teensy_lc_onekey/Makefile.3.2

@@ -0,0 +1,77 @@
+# Target file name (without extension).
+PROJECT = ch
+
+# Directory common source files exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+MCU_LDSCRIPT = MK20DX256
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0
+#   - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = k20x7
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+BOARD = PJRC_TEENSY_3_1
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+
+include $(TMK_DIR)/tool/chibios/common.mk
+include $(TMK_DIR)/tool/chibios/chibios.mk

keyboards/clueboard/60/boards/GENERIC_STM32_F303XC/board.h

@@ -416,7 +416,7 @@
                                      PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
                                      PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
                                      PIN_PUPDR_FLOATING(GPIOB_PIN6) |   \
-                                     PIN_PUPDR_PULLDOWN(GPIOB_PIN7) |   \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |   \
                                      PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
                                      PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
                                      PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
@@ -432,7 +432,7 @@
                                      PIN_ODR_HIGH(GPIOB_PIN4) |             \
                                      PIN_ODR_HIGH(GPIOB_PIN5) |             \
                                      PIN_ODR_HIGH(GPIOB_PIN6) |         \
-                                     PIN_ODR_LOW(GPIOB_PIN7) |         \
+                                     PIN_ODR_HIGH(GPIOB_PIN7) |         \
                                      PIN_ODR_HIGH(GPIOB_PIN8) |             \
                                      PIN_ODR_HIGH(GPIOB_PIN9) |             \
                                      PIN_ODR_HIGH(GPIOB_PIN10) |            \

keyboards/clueboard/66/keymaps/bloodlvst/Makefile

@@ -0,0 +1,2 @@
+EXTRAKEY_ENABLE = yes
+COMMAND_ENABLE  = no

keyboards/clueboard/66/keymaps/mouse_keys/Makefile

@@ -1,2 +1 @@
-RGBLIGHT_ENABLE = no
 MOUSEKEY_ENABLE = yes

keyboards/clueboard/66/keymaps/mrscooty/Makefile

@@ -0,0 +1,4 @@
+
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+

keyboards/clueboard/66/keymaps/serubin/Makefile

@@ -0,0 +1,4 @@
+
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+

keyboards/clueboard/66/keymaps/tetris/Makefile

@@ -0,0 +1 @@
+SRC = tetris_text.c

keyboards/clueboard/66/keymaps/xyverz/Makefile

@@ -0,0 +1,49 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Build Options
+#   change to "no" to disable the options, or define them in the makefile.mk in 
+#   the appropriate keymap folder that will get included automatically
+#
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/dz60/keymaps/iso_7u_space/keymap.c

@@ -4,6 +4,7 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
+<<<<<<< HEAD
 /* ISO 7u layout layer 0
 * ,-----------------------------------------------------------------------------------------.
 * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  ß  |  ´  |   BSPC    |
@@ -18,6 +19,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * `-----------------------------------------------------------------------------------------'
 */
 
+=======
+>>>>>>> dc7cc26dff01cc84b6f9f96af6d3aa03469aaca3
 	KEYMAP(
 		KC_ESC,   KC_1,       KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7, 	KC_8, 		KC_9,		KC_0, 		KC_MINS, KC_EQL, 	KC_NO, 	KC_BSPC,
 		KC_TAB,   KC_Q,       KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U, 	KC_I, 		KC_O,		KC_P, 		KC_LBRC, KC_RBRC, 	KC_BSLS,

keyboards/ergodox_ez/keymaps/drashna/config.h

@@ -1,8 +1,9 @@
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
+#include "../../config.h"
 
-#include QMK_KEYBOARD_CONFIG_H
 
+#define TAPPING_TERM 200
 
 #ifdef RGBLIGHT_ENABLE
 #undef RGBLIGHT_SAT_STEP 
@@ -12,12 +13,6 @@
 #define RGBLIGHT_EFFECT_BREATHE_CENTER 1
 #endif // RGBLIGHT_ENABLE
 
-#ifdef TAPPING_TERM
-#undef TAPPING_TERM
-#endif
-#define TAPPING_TERM 150
-#undef PERMISSIVE_HOLD
-#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
-#define ONESHOT_TAP_TOGGLE 2
+#define FORCE_NKRO
 
 #endif

keyboards/ergodox_ez/keymaps/drashna/keymap.c

@@ -15,8 +15,15 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
 #include "drashna.h"
 
+#include "keymap_german.h"
+
+#include "keymap_nordic.h"
+
 
 
 
@@ -24,6 +31,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 bool skip_leds = false;
 
 
+#ifdef TAP_DANCE_ENABLE
+#define KC_D3_1 TD(TD_D3_1)
+#define KC_D3_2 TD(TD_D3_2)
+#define KC_D3_3 TD(TD_D3_3)
+#define KC_D3_4 TD(TD_D3_4)
+#else
+#define KC_D3_1 KC_1
+#define KC_D3_2 KC_2
+#define KC_D3_3 KC_3
+#define KC_D3_4 KC_4
+#endif
+
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Keymap 0: Basic layer
@@ -52,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                 KC_EQUAL,       KC_1,       KC_2,       KC_3,       KC_4,       KC_5,       TG(_MOUS),
                 KC_TAB,         KC_Q,       KC_W,       KC_E,       KC_R,       KC_T,       TG(_DIABLO),
                 KC_BSPACE,      KC_A,       KC_S,       KC_D,       KC_F,       KC_G,
-                OSM(MOD_LSFT),      LCTL_T(KC_Z),KC_X,       KC_C,       KC_V,       KC_B,       TG(_GAMEPAD),
+                KC_LSHIFT,      LCTL_T(KC_Z),KC_X,       KC_C,       KC_V,       KC_B,       TG(_GAMEPAD),
                 LT(_SYMB,KC_GRAVE),KC_QUOTE, KC_LGUI,    KC_LBRACKET,KC_RBRACKET,
                 
                                     ALT_T(KC_APPLICATION),  KC_LGUI,
@@ -62,7 +81,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                 TG(_MOUS),       KC_6,       KC_7,       KC_8,       KC_9,       KC_0,           KC_MINUS,
                 TG(_DIABLO),     KC_Y,       KC_U,       KC_I,       KC_O,       KC_P,           KC_BSLASH,
                                 KC_H,       KC_J,       KC_K,       KC_L,       KC_SCOLON,      GUI_T(KC_QUOTE),
-                TG(_GAMEPAD),  KC_N,       KC_M,       KC_COMMA,   KC_DOT,     RCTL_T(KC_SLASH),OSM(MOD_RSFT),
+                TG(_GAMEPAD),  KC_N,       KC_M,       KC_COMMA,   KC_DOT,     RCTL_T(KC_SLASH),KC_RSHIFT,
                                             KC_LEFT,    KC_DOWN,    KC_UP,      KC_RIGHT,       TT(_SYMB),
                 KC_RGUI,    CTL_T(KC_ESCAPE),
                 KC_PGUP,
@@ -96,7 +115,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   TG(_MOUS),
         KC_TAB,         KC_Q,         KC_W,   KC_F,   KC_P,   KC_G,   TG(_DIABLO),
         KC_BSPC,        KC_A,         KC_R,   KC_S,   KC_T,   KC_D,
-        OSM(MOD_LSFT),        LCTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   TG(_GAMEPAD),
+        KC_LSFT,        LCTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   TG(_GAMEPAD),
         LT(_SYMB,KC_GRV),KC_QUOT,      KC_LGUI,    KC_LBRACKET,KC_RBRACKET,
                                               ALT_T(KC_APP),  KC_LGUI,
                                                               KC_HOME,
@@ -105,7 +124,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
              TG(_MOUS),    KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS,
              TG(_DIABLO),  KC_J,   KC_L,   KC_U,   KC_Y,   KC_SCLN,          KC_BSLS,
                           KC_H,   KC_N,   KC_E,   KC_I,   KC_O,             GUI_T(KC_QUOTE),
-             TG(_GAMEPAD),KC_K,  KC_M,   KC_COMM,KC_DOT, RCTL_T(KC_SLASH), OSM(MOD_RSFT),
+             TG(_GAMEPAD),KC_K,  KC_M,   KC_COMM,KC_DOT, RCTL_T(KC_SLASH), KC_RSHIFT,
                           KC_LEFT,    KC_DOWN,    KC_UP,      KC_RIGHT,       TT(_SYMB),
              KC_RGUI,        CTL_T(KC_ESC),
              KC_PGUP,
@@ -137,9 +156,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_DVORAK] = LAYOUT_ergodox(  
         // left hand
         KC_EQL,         KC_1,           KC_2,    KC_3,   KC_4,   KC_5,   TG(_MOUS),
-        KC_TAB,         KC_QUOT,        KC_COMM, KC_DOT, KC_P,   KC_Y,   TG(_DIABLO),
+        KC_TAB,        KC_QUOT,        KC_COMM, KC_DOT, KC_P,   KC_Y,   TG(_DIABLO),
         KC_BSPC,        KC_A,           KC_O,    KC_E,   KC_U,   KC_I,
-        OSM(MOD_LSFT),  LCTL_T(KC_SCLN), KC_Q,    KC_J,   KC_K,   KC_X,   TG(_GAMEPAD),
+        KC_LSFT,        LCTL_T(KC_SCLN), KC_Q,    KC_J,   KC_K,   KC_X,   TG(_GAMEPAD),
         LT(_SYMB,KC_GRV),KC_QUOT, KC_LGUI, KC_LBRACKET, KC_RBRACKET,
                                               ALT_T(KC_APP),  KC_LEAD,
                                                               KC_HOME,
@@ -148,7 +167,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
              TG(_MOUS),     KC_6,   KC_7,   KC_8,   KC_9,   KC_0,        KC_BSLS,
              TG(_DIABLO),   KC_F,   KC_G,   KC_C,   KC_R,   KC_L,        KC_SLSH,
                            KC_D,   KC_H,   KC_T,   KC_N,   KC_S,        KC_MINS,
-             TG(_GAMEPAD),KC_B,   KC_M,   KC_W,   KC_V,   RCTL_T(KC_Z), OSM(MOD_RSFT),
+             TG(_GAMEPAD),KC_B,   KC_M,   KC_W,   KC_V,   RCTL_T(KC_Z), KC_RSHIFT,
                                    KC_LEFT,KC_DOWN,KC_UP,  KC_RIGHT,    TT(_SYMB),
              KC_LALT,        CTL_T(KC_ESC),
              KC_PGUP,
@@ -159,11 +178,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,--------------------------------------------------.           ,--------------------------------------------------.
  * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | Del    |   Q  |   D  |   R  |   W  |   B  |  L1  |           |  L1  |   J  |   F  |   U  |   P  |   ;  |   \    |
+ * | Del    |   Q  |   W  |   F  |   P  |   G  |  L1  |           |  L1  |   J  |   L  |   U  |   Y  |   ;  |   \    |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | BkSp   |   A  |   S  |   H  |   T  |   D  |------|           |------|   Y  |   N  |   E  |   O  |   I  |   '    |
+ * | BkSp   |   A  |   R  |   S  |   T  |   D  |------|           |------|   H  |   N  |   E  |   I  |O / L2|   '    |
  * |--------+------+------+------+------+------| OVER |           | Meh  |------+------+------+------+------+--------|
- * | LShift |Z/Ctrl|   X  |   M  |   C  |   V  |      |           |      |   K  |   L  |   ,  |   .  |//Ctrl| RShift |
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   K  |   M  |   ,  |   .  |//Ctrl| RShift |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
  *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
  *   `----------------------------------'                                       `----------------------------------'
@@ -182,7 +201,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   TG(_MOUS),
         KC_TAB,         KC_Q,         KC_D,   KC_R,   KC_W,   KC_B,   TG(_DIABLO),
         KC_BSPC,        KC_A,         KC_S,   KC_H,   KC_T,   KC_G,
-        OSM(MOD_LSFT),        LCTL_T(KC_Z),  KC_X,   KC_M,   KC_C,   KC_V,   TG(_GAMEPAD),
+        KC_LSFT,        LCTL_T(KC_Z),  KC_X,   KC_M,   KC_C,   KC_V,   TG(_GAMEPAD),
         LT(_SYMB,KC_GRV),KC_QUOT,      KC_LGUI,    KC_LBRACKET,KC_RBRACKET,
                                               ALT_T(KC_APP),  KC_LEAD,
                                                               KC_HOME,
@@ -191,7 +210,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
              TG(_MOUS),    KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS,
              TG(_DIABLO),  KC_J,   KC_F,   KC_U,   KC_P,   KC_SCLN,          KC_BSLS,
                           KC_Y,   KC_N,   KC_E,   KC_O,   KC_I,             KC_QUOTE,
-             TG(_GAMEPAD),KC_K,  KC_L,   KC_COMM,KC_DOT, RCTL_T(KC_SLASH), OSM(MOD_RSFT),
+             TG(_GAMEPAD),KC_K,  KC_L,   KC_COMM,KC_DOT, RCTL_T(KC_SLASH), KC_RSHIFT,
                           KC_LEFT,    KC_DOWN,    KC_UP,      KC_RIGHT,       TT(_SYMB),
              KC_LALT,        CTL_T(KC_ESC),
              KC_PGUP,
@@ -220,7 +239,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 *                                 `--------------------'       `--------------------'
 */
   [_SYMB] = LAYOUT_ergodox(
-                EPRM,      KC_F1,      KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_WORKMAN,
+                KC_ESCAPE,      KC_F1,      KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_WORKMAN,
                 VRSN,           KC_EXLM,    KC_AT,      KC_LCBR,    KC_RCBR,    KC_PIPE,    KC_DVORAK,
                 KC_MAKE,        KC_HASH,    KC_DLR,     KC_LPRN,    KC_RPRN,    KC_GRAVE,
                 KC_RESET,       KC_PERC,    KC_CIRC,    KC_LBRACKET,KC_RBRACKET,KC_TILD,    KC_COLEMAK,
@@ -261,7 +280,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 `--------------------'       `--------------------'
  */
   [_GAMEPAD] = LAYOUT_ergodox(
-                KC_ESCAPE,      KC_TRNS,    KC_TRNS,    KC_TRNS,    HYPR(KC_D), HYPR(KC_Q), HYPR(KC_GRV),
+                KC_ESCAPE,      KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,
                 KC_F1,          KC_K,       KC_Q,       KC_W,       KC_E,       KC_R,       KC_T,
                 KC_TAB,         KC_G,       KC_A,       KC_S,       KC_D,       KC_F,
                 KC_LCTL,        KC_LSHIFT,  KC_Z,       KC_X,       KC_C,       KC_V,       KC_TRNS,
@@ -275,7 +294,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                 KC_I,       KC_O,       KC_NO,      KC_NO,      KC_NO,      KC_NO,
                 TG(_GAMEPAD),   KC_N,       KC_M,       KC_NO,      KC_NO,      KC_NO,      KC_NO,
                                             KC_LEFT,    KC_DOWN,    KC_UP,      KC_RIGHT,      KC_NO,
-                KC_HYPR,         MAGIC_TOGGLE_NKRO,
+                KC_NO,          KC_NO,
                 KC_NO,
                 KC_PGDOWN,      KC_DELETE, KC_ENTER
             ),
@@ -345,7 +364,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 `--------------------'       `--------------------'
  */
   [_MOUS] = LAYOUT_ergodox(
-                KC_NO,      KC_SECRET_1,KC_SECRET_2,KC_SECRET_3,KC_SECRET_4,KC_SECRET_5,KC_TRNS,
+                KC_NO,      KC_NO,      KC_NO,      KC_NO,      KC_NO,      KC_NO,      KC_TRNS,
                 KC_NO,      KC_NO,      KC_MS_U,    KC_NO,      KC_NO,      KC_NO,      KC_TRNS,
                 KC_NO,      KC_MS_L,    KC_MS_D,    KC_MS_R,    KC_NO,      KC_NO,
                 KC_NO,      KC_ACL0,    KC_ACL1,    KC_ACL2,    KC_NO,      KC_NO,      KC_TRNS,

keyboards/ergodox_ez/keymaps/drashna/rules.mk

@@ -4,3 +4,8 @@ COMMAND_ENABLE    = no  # Commands for debug and configuration
 RGBLIGHT_ENABLE   = yes
 CONSOLE_ENABLE    = no
 
+EXTRAFLAGS        = -flto
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/gherkin/keymaps/wanleg/config.h

@@ -1,61 +0,0 @@
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    40 Percent Club
-#define PRODUCT         Gherkin
-#define DESCRIPTION     A 30 key ortholinear keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 6
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* number of backlight levels */
-#define BACKLIGHT_PIN B5
-#ifdef BACKLIGHT_PIN
-#define BACKLIGHT_LEVELS 3
-#endif
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-/*tap dance definition */
-#define TAPPING_TERM 200
-
-
-#ifdef RGB_DI_PIN
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 0
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
-
-#endif

keyboards/gherkin/keymaps/wanleg/keymap.c

@@ -1,221 +0,0 @@
-/* Copyright 2017 Brian Fong
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "gherkin.h"
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QW 0
-#define DIR 1
-#define NUM 2
-#define ETC 3
-
-
-/////////////// TAP DANCE SECTION START ///////////////
-//Tap Dance Declarations (list of my tap dance configurations)
-enum {
-  TD_SFT_CAPS = 0
-  ,TD_Q_ESC
-  ,ENT_TAP_DANCE
-  ,DEL_TAP_DANCE
-};
-
-///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION START /////
-///// (no need to edit this section) /////
-//Enums used to clearly convey the state of the tap dance
-enum {
-  SINGLE_TAP = 1,
-  SINGLE_HOLD = 2,
-  DOUBLE_TAP = 3,
-  DOUBLE_HOLD = 4,
-  DOUBLE_SINGLE_TAP = 5 //send SINGLE_TAP twice - NOT DOUBLE_TAP
-  // Add more enums here if you want for triple, quadruple, etc.
-};
-
-typedef struct {
-  bool is_press_action;
-  int state;
-} tap;
-
-int cur_dance (qk_tap_dance_state_t *state) {
-  if (state->count == 1) {
-    //If count = 1, and it has been interrupted - it doesn't matter if it is pressed or not: Send SINGLE_TAP
-    if (state->interrupted || !state->pressed) return SINGLE_TAP;
-    if (state->interrupted) return SINGLE_TAP;
-    else return SINGLE_HOLD;
-  }
-  //If count = 2, and it has been interrupted - assume that user is trying to type the letter associated
-  //with single tap.
-  else if (state->count == 2) {
-    if (state->interrupted) return DOUBLE_SINGLE_TAP;
-    else if (state->pressed) return DOUBLE_HOLD;
-    else return DOUBLE_TAP;
-  }
-  else return 6; //magic number. At some point this method will expand to work for more presses
-}
-///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION END /////
-///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION START /////
-//instantialize an instance of 'tap' for the 'ENT' tap dance.
-static tap ENTtap_state = {
-  .is_press_action = true,
-  .state = 0
-};
-
-void ENT_finished (qk_tap_dance_state_t *state, void *user_data) {
-  ENTtap_state.state = cur_dance(state);
-  switch (ENTtap_state.state) {
-    case SINGLE_TAP: register_code(KC_SPC); break;
-    case SINGLE_HOLD: register_code(KC_LSFT); break;
-    case DOUBLE_TAP: register_code(KC_ENT); break;
-    case DOUBLE_HOLD: register_code(KC_NO); break; // setting double hold to do nothing (change this if you want)
-    case DOUBLE_SINGLE_TAP: register_code(KC_SPC); unregister_code(KC_SPC); register_code(KC_SPC);
-    //Last case is for fast typing. Assuming your key is `f`:
-    //For example, when typing the word `buffer`, and you want to make sure that you send `ff` and not `Esc`.
-    //In order to type `ff` when typing fast, the next character will have to be hit within the `TAPPING_TERM`, which by default is 200ms.
-  }
-}
-
-void ENT_reset (qk_tap_dance_state_t *state, void *user_data) {
-  switch (ENTtap_state.state) {
-    case SINGLE_TAP: unregister_code(KC_SPC); break;
-    case SINGLE_HOLD: unregister_code(KC_LSFT); break;
-    case DOUBLE_TAP: unregister_code(KC_ENT); break;
-    case DOUBLE_HOLD: unregister_code(KC_NO);
-    case DOUBLE_SINGLE_TAP: unregister_code(KC_SPC);
-  }
-  ENTtap_state.state = 0;
-}
-
-//instanalize an instance of 'tap' for the 'DEL' tap dance.
-static tap DELtap_state = {
-  .is_press_action = true,
-  .state = 0
-};
-
-void DEL_finished (qk_tap_dance_state_t *state, void *user_data) {
-  DELtap_state.state = cur_dance(state);
-  switch (DELtap_state.state) {
-    case SINGLE_TAP: register_code(KC_BSPC); break;
-    case SINGLE_HOLD: register_code(KC_LCTL); break;
-    case DOUBLE_TAP: register_code(KC_DEL); break;
-    case DOUBLE_HOLD: register_code(KC_NO); break;
-    case DOUBLE_SINGLE_TAP: register_code(KC_BSPC); unregister_code(KC_BSPC); register_code(KC_BSPC);
-  }
-}
-
-void DEL_reset (qk_tap_dance_state_t *state, void *user_data) {
-  switch (DELtap_state.state) {
-    case SINGLE_TAP: unregister_code(KC_BSPC); break;
-    case SINGLE_HOLD: unregister_code(KC_LCTL); break;
-    case DOUBLE_TAP: unregister_code(KC_DEL); break;
-    case DOUBLE_HOLD: unregister_code(KC_NO);
-    case DOUBLE_SINGLE_TAP: unregister_code(KC_BSPC);
-  }
-  DELtap_state.state = 0;
-}
-///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION END /////
-
-//Tap Dance Definitions
-//THIS SECTION HAS TO BE AT THE END OF THE TAP DANCE SECTION
-qk_tap_dance_action_t tap_dance_actions[] = {
-  [TD_SFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS)
-// Other declarations would go here, separated by commas, if you have them
- ,[TD_Q_ESC]  = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC)
- ,[ENT_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ENT_finished, ENT_reset)
- ,[DEL_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, DEL_finished, DEL_reset)
-};
-
-//In Layer declaration, add tap dance item in place of a key code
-//TD(TD_SFT_CAPS)
-
-///////////// TAP DANCE SECTION END ///////////////
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- /* Qwerty
- * .-----------------------------------------------------------------------------------------.
- * | Q//ESC | W      | E      | R      | T      | Y      | U      | I      | O      | P      |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * | A      | S      | D      | F      | G      | H      | J      | K      | L      | ENTER  |
- * |        |        |        |        |        |        |        |        |        |SFThold |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * | Z      | X      | C      | V/NUM  | B/ETC  | N      | M/DIR  | ,/GUI  | ./ALT  | BKSC   |
- * | SFThold|        |        |        |        |        |        |        |        |CTRLhold|
- * '-----------------------------------------------------------------------------------------'
- */
-
- [_QW] = KEYMAP( /* Qwerty*/
-   TD(TD_Q_ESC), KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
-   KC_A,    KC_S,    KC_D,    KC_F,    KC_G, KC_H,    KC_J,    KC_K,    KC_L,   SFT_T(KC_SPC),
-   SFT_T(KC_Z),    KC_X,    KC_C,    LT(NUM, KC_V), LT(ETC, KC_B), KC_N, LT(DIR, KC_M), GUI_T(KC_COMM), ALT_T(KC_DOT), CTL_T(KC_BSPC)
-  ),
-
-
-//
-///*
-// *  Directional Modifiers
-// * .-----------------------------------------------------------------------------------------.
-// * | TAB    |   up   |        | INS    |  CTRL  | SHIFT  | PgUp   | HOME   |  -     |  =     |
-// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-// * | left   |  down  | right  | PrScr  | SHIFT  |  CTRL  | PgDn   | END    |  [     |  ]     |
-// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-// * |        |        |        |        |        |        |        |        | ALT    |  /     |
-// * '-----------------------------------------------------------------------------------------'
-// */
-//
-[DIR] = KEYMAP( /* Directional Modifiers */
-  KC_TAB,  KC_UP,   KC_TRNS, KC_INS,  KC_LCTL, KC_RSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL  ,
-  KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_RCTL, KC_PGDN, KC_END,  KC_LBRC, KC_RBRC ,
-  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RALT, KC_SLSH
-),
-//
-// /*
-//  *  Numbers
-//  * .-----------------------------------------------------------------------------------------.
-//  * | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    |
-//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-//  * | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |
-//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-//  * | F11    | F12    |        |        |        | ENTER  | SHIFT  | GUI    | ./ALT  | BKSC   |
-//  * |        |        |        |        |        |        |        |        |        |CTRLhold|
-//  * '-----------------------------------------------------------------------------------------'
-//  */
-//
-[NUM] = KEYMAP ( /* Numbers */
-  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10  ,
-  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0    ,
-  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC)
-),
-//
-//
-//  /*
-//   *  ETC
-//   * .-----------------------------------------------------------------------------------------.
-//   * |  `     |        |        |        |        |        |        |        |        |  \     |
-//   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-//   * | CAPS   | P-Brk  |        |        |        |        |        |        |  ;     |  '     |
-//   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-//   * | SHIFT  |        |        |        |        | C-A-D  |        | GUI    |        |  DEL   |
-//   * '-----------------------------------------------------------------------------------------'
-//   */
-//
-[ETC] = KEYMAP( /* ETC */
-  KC_GRV,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS ,
-  KC_CAPS, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT ,
-  KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LALT(LCTL(KC_DEL)), KC_TRNS, KC_RGUI, KC_TRNS, KC_DEL
- ),
-};

keyboards/gherkin/keymaps/wanleg/readme.md

@@ -1,12 +0,0 @@
-![Gherkin Wanleg Layout Image](https://i.imgur.com/RpN5N42.png)
-
-# Gherkin Wanleg Layout
-
-Here is the layout I came up with to preserve a standard QWERTY layout as much as possible, in as few layers as possible for a 30 key board.
-I originally set up a few Tap Dance keys, but eventually dropped most of them in favor of chorded versions, since in actual use, they tended to impede typing speed more than their (current) two-key versions.
-I've left them in my layout ready for use if anyone wants to try them out:
-Single tap - Double tap - Hold
-space - enter - shift
-backspace - delete - control
-shift - caps lock - XXXX
-KC_Q - escape - XXXX

keyboards/gherkin/keymaps/wanleg/rules.mk

@@ -1,63 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = no
-TAP_DANCE_ENABLE = yes		# Enable Tap Dance (comment if not being implemented)

keyboards/handwired/woodpad/keymaps/drashna/config.h

@@ -17,7 +17,7 @@
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include QMK_KEYBOARD_CONFIG_H
+#include "../../config.h"
 
 #ifdef TAP_DANCE_ENABLE
 #define TAPPING_TERM 200

keyboards/jd45/keymaps/mjt/keymap.c

@@ -50,13 +50,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             // action_function_tap may also handle this...
             if (record->event.pressed)
             {
-                breathing_period_set(3);
+                breathing_speed_set(3);
                 breathing_enable();
                 layer_on(1);
             }
             else
             {
-                breathing_period_set(1);
+                breathing_speed_set(1);
                 breathing_self_disable();
                 layer_off(1);
             }
@@ -64,13 +64,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case M_LAYER2:
             if (record->event.pressed)
             {
-                breathing_period_set(2);
+                breathing_speed_set(2);
                 breathing_pulse();
                 layer_on(2);
             }
             else
             {
-                breathing_period_set(1);
+                breathing_speed_set(1);
                 breathing_self_disable();
                 layer_off(2);
             }

keyboards/jj40/config.h

@@ -15,8 +15,6 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "config_common.h"
-
 #ifndef CONFIG_H
 #define CONFIG_H
 
@@ -41,13 +39,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define NO_UART 1
 
-/* RGB underglow */
-// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
-// The same pin is used on the JJ40, at least.
-#define RGBLED_NUM 5
-#define RGB_DI_PIN E2
-#define RGBLIGHT_ANIMATIONS
-
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 

keyboards/jj40/jj40.c

@@ -22,25 +22,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "action_layer.h"
 #include "quantum.h"
 
-#include "i2c.h"
-
-// custom RGB driver
-extern rgblight_config_t rgblight_config;
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    for (uint8_t i=0; i<RGBLED_NUM; i++) {
-      led[i].r = 0;
-      led[i].g = 0;
-      led[i].b = 0;
-    }
-  }
-
-  i2c_init();
-  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
 __attribute__ ((weak))
 void matrix_scan_user(void) {
-    rgblight_task();
-    /* Nothing else for now. */
+    /* Nothing to do here... yet */
 }
+
+void matrix_init_kb(void) {
+
+  // Call the keymap level matrix init.
+  matrix_init_user();
+
+  // Set our LED pins as output
+  DDRB |= (1<<6);
+}
+
+void matrix_init_user(void) {
+}

keyboards/jj40/jj40.h

@@ -65,6 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   { K312, K311, K310, K39, K35, K36, K3X, KC_NO, K34, K33, K32, K31 }  \
 }
 
-#define KEYMAP KEYMAP_MIT
+#define KEYMAP KEYMAP_OFFSET
 
 #endif

keyboards/jj40/keymaps/fun40/rules.mk

@@ -11,11 +11,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = yes          # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-
-RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
-DISABLE_WS2812 = yes
-
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/jj40/keymaps/krusli/keymap.c

@@ -1,85 +0,0 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "jj40.h"
-#include "action_layer.h"
-
-#define _QWERTY 0
-#define _LOWER  1
-#define _RAISE  2
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Qwerty
- * ,-----------------------------------------------------------------------------------.
- * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      | Ctrl | GUI  | Alt  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_QWERTY] = KEYMAP( \
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
-  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  _______, KC_LCTL, KC_LGUI, KC_LALT, MO(_LOWER),  KC_SPC,  MO(_RAISE),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      |      |      |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_LOWER] = KEYMAP( \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,_______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-
-/* Raise
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 | RGB  | RGB  | RGB  | RGB  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      | RGB  | RGB  | RGB  | RGB  |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_RAISE] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, _______, \
-  _______, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-)
-};

keyboards/jj40/keymaps/krusli/readme.md

@@ -1,2 +0,0 @@
-# krusli
-Default JJ40 keymap, adapted with RGB underglow support. GUI and LAlt is also swapped.

keyboards/jj40/rules.mk

@@ -26,7 +26,7 @@ F_CPU = 12000000
 
 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
+#     different sizes, comment this out, and the correct address will be loaded 
 #     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = bootloadHID
 
@@ -37,11 +37,8 @@ EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
-
-RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
-DISABLE_WS2812 = yes  # TODO check if this is necessary
-
+RGBLIGHT_ENABLE = no
+RGBLIGHT_CUSTOM_DRIVER = no
 KEY_LOCK_ENABLE = yes
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/jj40/usbconfig.h

@@ -118,8 +118,7 @@ section at the end of this file).
 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
  * device is powered from the USB bus.
  */
-// max power draw with maxed white underglow measured at 120 mA (peaks)
-#define USB_CFG_MAX_BUS_POWER           150
+#define USB_CFG_MAX_BUS_POWER           500
 /* Set this variable to the maximum USB bus power consumption of your device.
  * The value is in milliamperes. [It will be divided by two since USB
  * communicates power requirements in units of 2 mA.]

keyboards/kbd75/keymaps/iso/keymap.c

@@ -1,220 +0,0 @@
-#include "kbd75.h"
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-	KEYMAP(
-		LT(2, KC_ESC), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, MO(1), KC_DEL,
-		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, KC_HOME,
-		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
-		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
-		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
-		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS,
-		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, M(1), M(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-	KEYMAP(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
-
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-
-
-	switch (id) {
-
-	}
-	return MACRO_NONE;
-}
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
-	} else {
-		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
-	}
-
-	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-	} else {
-
-	}
-
-	if (usb_led & (1 << USB_LED_KANA)) {
-
-	} else {
-
-	}
-
-}
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/mechmini/config.h

@@ -30,15 +30,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 15
 
-#define NO_UART 1
-
-/* RGB underglow */
-// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
-// The same pin is used on the JJ40, at least.
 #define RGBLED_NUM 16
 #define RGBLIGHT_ANIMATIONS
 #define RGB_DI_PIN E2
 
+#define NO_UART 1
+
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 

keyboards/mechmini/keymaps/default/keymap.c

@@ -14,12 +14,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "mechmini.h"
+#include "rgblight.h"
 #include "quantum.h"
 
-#define _BL  0   // base layer
-#define _FN1 1  // function layer 1
-#define _FN2 2  // function layer 2
-#define _FN3 3  // function layer 3
+#define MAX_BRIGHTNESS 15
+#define MAX_BRIGHTNESS_IOS 5  // max brightness suitable for iOS devices
+
+#define _BL 0
+#define _FN1 1
+#define _FN2 2
+#define _FN3 3
 #define _____ KC_TRNS
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -48,3 +52,109 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      _____,      _____,      _____,            _____,        _____,         _____,                   _____,    _____
    )
 };
+
+/**
+ * Blank keymap
+ [0] = KEYMAP(
+   _____,      _____,      _____,      _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____
+   _____,      _____,      _____,      _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____,
+   _____,      _____,      _____,      _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____,
+   _____,      _____,      _____,            _____,        _____,         _____,                   _____,    _____
+ )
+ */
+
+uint8_t current_level = 4;
+int is_on = 0;
+
+uint8_t r = 0xFF;
+uint8_t g = 0xFF;
+uint8_t b = 0xFF;
+
+uint8_t max_brightness = MAX_BRIGHTNESS_IOS;
+
+enum macro_id {
+  TOGGLE_RGB,
+  BRIGHTNESS_DOWN,
+  BRIGHTNESS_UP,
+  COLOR_1,
+  COLOR_2,
+  COLOR_3,
+  ENABLE_MAX_BRIGHTNESS
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  keyevent_t event = record->event;
+
+  switch (id) {
+    case TOGGLE_RGB:
+      if (event.pressed) {
+       if (!is_on) {
+         current_level = 4;
+         is_on = 1;
+       } else {
+         is_on = 0;
+       }
+      }
+    case BRIGHTNESS_DOWN:
+      if (event.pressed && current_level > 0) {
+        current_level--;
+      }
+      break;
+    case BRIGHTNESS_UP:
+      if (event.pressed && current_level < max_brightness) {
+        current_level++;
+      }
+      break;
+    case COLOR_1:  // set to pink
+      if (event.pressed) {
+        r = 0xFF;
+        g = 0x81;
+        b = 0xC2;
+      }
+      break;
+    case COLOR_2:  // set to cyan
+      if (event.pressed) {
+        r = 0x00;
+        g = 0xE0;
+        b = 0xFF;
+      }
+      break;
+    case COLOR_3:  // set to white
+      if (event.pressed) {
+        r = 0xFF;
+        g = 0xFF;
+        b = 0xFF;
+      }
+      break;
+    case ENABLE_MAX_BRIGHTNESS: // enable all 16 brightness steps
+      if (event.pressed) {
+        max_brightness = MAX_BRIGHTNESS;
+      }
+      break;
+  }
+
+  return MACRO_NONE;
+}
+
+const uint16_t fn_actions[] PROGMEM = {
+};
+
+void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b);
+
+uint8_t dim(uint8_t color, uint8_t opacity) {
+   return ((uint16_t) color * opacity / 0xFF) & 0xFF;
+}
+
+void user_setrgb(uint8_t r, uint8_t g, uint8_t b) {
+   uint8_t alpha = current_level * 0x11;
+   rgblight_setrgb(dim(r, alpha), dim(g, alpha), dim(b, alpha));
+}
+
+void matrix_scan_user(void) {
+  if (!is_on) {
+    current_level = 0;
+    user_setrgb(r, g, b);
+  } else {
+    user_setrgb(r, g, b);
+  }
+}

keyboards/mechmini/mechmini.c

@@ -16,16 +16,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "mechmini.h"
+#include "rgblight.h"
+
 #include <avr/pgmspace.h>
 
 #include "action_layer.h"
 #include "i2c.h"
 #include "quantum.h"
 
-#include "rgblight.h"
-
-// custom RGB driver
 extern rgblight_config_t rgblight_config;
+
 void rgblight_set(void) {
     if (!rgblight_config.enable) {
         for (uint8_t i = 0; i < RGBLED_NUM; i++) {
@@ -42,5 +42,4 @@ void rgblight_set(void) {
 __attribute__ ((weak))
 void matrix_scan_user(void) {
     rgblight_task();
-    /* add other tasks to be done on each matrix scan */
 }

keyboards/mechmini/usbconfig.h

@@ -118,7 +118,7 @@ section at the end of this file).
 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
  * device is powered from the USB bus.
  */
-#define USB_CFG_MAX_BUS_POWER           500
+#define USB_CFG_MAX_BUS_POWER           100
 /* Set this variable to the maximum USB bus power consumption of your device.
  * The value is in milliamperes. [It will be divided by two since USB
  * communicates power requirements in units of 2 mA.]

keyboards/meira/keymaps/takmiya/config.h

@@ -1,24 +0,0 @@
-/* Copyright 2017 Cole Markham, WoodKeys.click
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif

keyboards/meira/keymaps/takmiya/keymap.c

@@ -1,262 +0,0 @@
-/* Copyright 2017 Cole Markham
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "meira.h"
-#include "issi.h"
-#include "lighting.h"
-
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
-#define _QWERTY 0
-#define _LOWER 1
-#define _RAISE 2
-#define _ADJUST 16
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE,
-  ADJUST,
-};
-
-// define variables for reactive RGB
-bool TOG_STATUS = false;
-int RGB_current_mode;
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-        /* Qwerty
-         * ,-----------------------------------------------------------------------------------.
-         * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
-         * |------+------+------+------+------+-------------+------+------+------+------+------|
-         * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  '   |
-         * |------+------+------+------+------+------|------+------+------+------+------+------|
-         * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |//GUI |Enter |
-         * |------+------+------+------+------+------+------+------+------+------+------+------|
-         * | Ctrl | GUI  | Alt  | GUI  |Lower |Space |Enter |Raise | Left | Down |  Up  |Right |
-         * `-----------------------------------------------------------------------------------'
-         */
-        [_QWERTY] = KEYMAP( \
-                KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
-                KC_ESC,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-                KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  GUI_T(KC_SLSH),  KC_ENT, \
-                KC_LCTL,  KC_LGUI, KC_LALT, KC_RGUI, LOWER,   KC_SPC,  KC_ENT,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-        ),
-
-        /* Lower
-         * ,-----------------------------------------------------------------------------------.
-         * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | DEL  |
-         * |------+------+------+------+------+-------------+------+------+------+------+------|
-         * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
-         * |------+------+------+------+------+------|------+------+------+------+------+------|
-         * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |      |
-         * |------+------+------+------+------+------+------+------+------+------+------+------|
-         * |      |      |      |      |      |      |      |      | Home | PgUp | PgDn | End  |
-         * `-----------------------------------------------------------------------------------'
-         */
-        [_LOWER] = KEYMAP( \
-                KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_DEL, \
-                _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE, \
-                _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), _______, _______,  _______, \
-                _______, _______, _______, _______, _______, _______, _______, _______,    KC_HOME,    KC_PGDN, KC_PGUP, KC_END \
-        ),
-
-        /* Raise
-         * ,-----------------------------------------------------------------------------------.
-         * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | DEL  |
-         * |------+------+------+------+------+-------------+------+------+------+------+------|
-         * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
-         * |------+------+------+------+------+------|------+------+------+------+------+------|
-         * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |      |
-         * |------+------+------+------+------+------+------+------+------+------+------+------|
-         * |      |      |      |      |      |      |      |      | Home | PgUp | PgDn | End  |
-         * `-----------------------------------------------------------------------------------'
-         */
-        [_RAISE] = KEYMAP( \
-                KC_GRV , KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
-                _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
-                _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
-                _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \
-        ),
-
-        /* Adjust (Lower + Raise)
-         * ,-----------------------------------------------------------------------------------.
-         * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
-         * |------+------+------+------+------+-------------+------+------+------+------+------|
-         * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|      |      |      |      |
-         * |------+------+------+------+------+------|------+------+------+------+------+------|
-         * |      |      |      |      |      |      |      |      |      |      |      |      |
-         * |------+------+------+------+------+------+------+------+------+------+------+------|
-         * |      |      |      |      |      |             |      |      |      |      |      |
-         * `-----------------------------------------------------------------------------------'
-         */
-        [_ADJUST] =  KEYMAP( \
-                BL_TOGG, RESET,   _______, KC_MRWD, KC_MPLY, KC_MFFD, KC_PSCR, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, \
-                BL_STEP, RGB_MOD, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  _______, _______,  _______, _______, \
-                _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-                _______, KC_PSCR, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
-        )
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-// Setting ADJUST layer RGB back to default
-void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_mode(RGB_current_mode);
-#endif
-    layer_on(layer3);
-  } else {
-    layer_off(layer3);
-  }
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
-        #endif
-//        persistent_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case LOWER:
-        if (record->event.pressed) {
-            //not sure how to have keyboard check mode and set it to a variable, so my work around
-            //uses another variable that would be set to true after the first time a reactive key is pressed.
-            if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
-            } else {
-                TOG_STATUS = !TOG_STATUS;
-#ifdef RGBLIGHT_ENABLE
-                rgblight_mode(16);
-#endif
-            }
-            layer_on(_LOWER);
-            update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-        } else {
-#ifdef RGBLIGHT_ENABLE
-            rgblight_mode(RGB_current_mode);   // revert RGB to initial mode prior to RGB mode change
-#endif
-            TOG_STATUS = false;
-            layer_off(_LOWER);
-            update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-        }
-        return false;
-        break;
-    case RAISE:
-        if (record->event.pressed) {
-            //not sure how to have keyboard check mode and set it to a variable, so my work around
-            //uses another variable that would be set to true after the first time a reactive key is pressed.
-            if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
-            } else {
-                TOG_STATUS = !TOG_STATUS;
-#ifdef RGBLIGHT_ENABLE
-                rgblight_mode(15);
-#endif
-            }
-            layer_on(_RAISE);
-            update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-        } else {
-#ifdef RGBLIGHT_ENABLE
-            rgblight_mode(RGB_current_mode);  // revert RGB to initial mode prior to RGB mode change
-#endif
-            layer_off(_RAISE);
-            TOG_STATUS = false;
-            update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-        }
-        return false;
-        break;
-    case ADJUST:
-        // FIXME add RGB feedback
-        if (record->event.pressed) {
-            layer_on(_ADJUST);
-        } else {
-            layer_off(_ADJUST);
-        }
-        return false;
-        break;
-    case BL_TOGG:
-#ifdef ISSI_ENABLE
-        if (record->event.pressed) {
-            print("Enabling backlight\n");
-            issi_init();
-        }
-#endif
-        return false;
-        break;
-    case BL_STEP:
-        if (record->event.pressed) {
-            print("Stepping backlight\n");
-#ifdef BACKLIGHT_ENABLE
-            print("Really stepping backlight\n");
-            backlight_step();
-#endif
-
-        }
-        return false;
-        break;
-        //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
-#ifdef RGBLIGHT_ENABLE
-    case RGB_MOD:
-        if (record->event.pressed) {
-            rgblight_mode(RGB_current_mode);
-            rgblight_step();
-            RGB_current_mode = rgblight_config.mode;
-        }
-        return false;
-        break;
-#endif
-//    case BL_INC:
-//    		meira_inc_backlight_level();
-//    	      return false;
-//    		break;
-  }
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/meira/keymaps/takmiya/readme.md

@@ -1 +0,0 @@
-# The takmiya keymap for meira

keyboards/nyquist/keymaps/pitty/Makefile

@@ -0,0 +1,7 @@
+RGBLIGHT_ENABLE = yes
+NKRO_ENABLE = yes
+
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/orthodox/keymaps/drashna/config.h

@@ -22,7 +22,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include QMK_KEYBOARD_CONFIG_H
+#include "config_common.h"
 
 /* Use I2C or Serial, not both */
 
@@ -35,14 +35,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 #define EE_HANDS
 
-#ifdef TAPPING_TERM
-#undef TAPPING_TERM
+#ifndef TAPPING_TERM
+#define TAPPING_TERM 200
 #endif
-#define TAPPING_TERM 150
-#undef PERMISSIVE_HOLD
-#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
-#define ONESHOT_TAP_TOGGLE 2
-
 
 
 /* key combination for command */
@@ -68,7 +63,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef AUDIO_ENABLE
 #define C6_AUDIO
-#define STARTUP_SONG SONG(ZELDA_TREASURE)
+#define STARTUP_SONG SONG(ZELDA_PUZZLE)
 #endif
 
 #endif

keyboards/orthodox/keymaps/drashna/keymap.c

@@ -50,24 +50,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_QWERTY] = KEYMAP(\
   KC_ESC,     KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                                                                   KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
   KC_TAB,     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,             KC_UP,    KC_DOWN,        KC_LEFT, KC_RIGHT,           KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-  OSM(MOD_LSFT),CTL_T(KC_Z), KC_X, KC_C,   KC_V,    KC_B,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_N,    KC_M,    KC_COMM, KC_DOT, CTL_T(KC_SLASH), KC_LGUI \
+  KC_LSFT,    CTL_T(KC_Z), KC_X, KC_C,   KC_V,    KC_B,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_N,    KC_M,    KC_COMM, KC_DOT, CTL_T(KC_SLASH), KC_LGUI \
 ),
 
 [_COLEMAK] = KEYMAP(\
   KC_ESC,     KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,                                                                   KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
   KC_TAB,     KC_A,    KC_R,    KC_S,    KC_T,    KC_D,             KC_UP,    KC_DOWN,        KC_LEFT, KC_RIGHT,          KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
-  OSM(MOD_LSFT),    CTL_T(KC_Z), KC_X, KC_C,   KC_V,    KC_B,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_K,    KC_M,    KC_COMM, KC_DOT,  CTL_T(KC_SLASH), KC_LGUI \
+  KC_LSFT,    CTL_T(KC_Z), KC_X, KC_C,   KC_V,    KC_B,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_K,    KC_M,    KC_COMM, KC_DOT,  CTL_T(KC_SLASH), KC_LGUI \
 ),
 
 [_DVORAK] = KEYMAP(\
   KC_ESC,   KC_QUOT, KC_COMM, KC_DOT, KC_P,     KC_Y,                                                                   KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
   KC_TAB,   KC_A,    KC_O,    KC_E,   KC_U,     KC_I,             KC_UP,    KC_DOWN,        KC_LEFT, KC_RIGHT,          KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, \
-  OSM(MOD_LSFT), CTL_T(KC_SCLN), KC_Q, KC_J, KC_K,    KC_X,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z), KC_LGUI \
+  KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K,    KC_X,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z), KC_LGUI \
 ),
 [_WORKMAN] = KEYMAP(\
   KC_ESC,   KC_QUOT, KC_COMM, KC_DOT, KC_P,     KC_Y,                                                                   KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
   KC_TAB,   KC_A,    KC_O,    KC_E,   KC_U,     KC_I,             KC_UP,    KC_DOWN,        KC_LEFT, KC_RIGHT,          KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, \
-  OSM(MOD_LSFT), CTL_T(KC_SCLN), KC_Q, KC_J, KC_K,    KC_X,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z), KC_LGUI \
+  KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K,    KC_X,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z), KC_LGUI \
 ),
 
 [_LOWER] = KEYMAP(\

keyboards/orthodox/keymaps/drashna/rules.mk

@@ -4,4 +4,8 @@ RGBLIGHT_ENABLE   = yes
 AUDIO_ENABLE      = no
 MOUSEKEY_ENABLE   = no
 NKRO_ENABLE       = yes
-FAUXCLICKY_ENABLE = no
+FAUXCLICKY_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/orthodox/rev3/rules.mk

@@ -1 +1,5 @@
 BACKLIGHT_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif

keyboards/planck/config.h

@@ -44,6 +44,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define AUDIO_VOICES
 #define C6_AUDIO
 
+#define CONSOLE_IN_ENABLE
+
 #define BACKLIGHT_PIN B7
 
 /* COL2ROW or ROW2COL */

keyboards/planck/keymaps/aviator/config.h

@@ -1,44 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
-
-#define BACKLIGHT_BREATHING
-
-#ifdef AUDIO_ENABLE
-    #define STARTUP_SONG SONG(PLANCK_SOUND)
-    // #define STARTUP_SONG SONG(NO_SOUND)
-
-    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
-                                  SONG(COLEMAK_SOUND), \
-                                  SONG(DVORAK_SOUND) \
-                                }
-#endif
-
-#define MUSIC_MASK (keycode != KC_NO)
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-
-#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 2
-
-#endif

keyboards/planck/keymaps/aviator/keyboard-layout.json

@@ -1,138 +0,0 @@
-[
-  {
-    "name": "The Aviator",
-    "author": "John Ramsay",
-    "notes": "Designed for aeronautical data entry on the OLKB Planck.",
-    "switchMount": "cherry",
-    "switchBrand": "gateron",
-    "switchType": "KS-3-Green",
-    "plate": true
-  },
-  [
-    {
-      "c": "#ADADAD",
-      "t": "#000000\n#3f76d4\n#d67509"
-    },
-    "\nDel\nDel\n\n\n\n\n\n\nEsc",
-    {
-      "c": "#CDC1B0"
-    },
-    "\n!\nF1\n\n\n\n\n\n\nQ",
-    "\n@\nF2\n\n\n\n\n\n\nW",
-    "\n#\nF3\n\n\n\n\n\n\nE",
-    "\n$\nF4\n\n\n\n\n\n\nR",
-    "\n%\n\n\n\n\n\n\n\nT",
-    "\n^\nN\n\n\n\n\n\n\nY",
-    "\n&\nS\n\n\n\n\n\n\nU",
-    "\n*\n7\n\n\n\n\n\n\nI",
-    "\n(\n8\n\n\n\n\n\n\nO",
-    "\n)\n9\n\n\n\n\n\n\nP",
-    {
-      "c": "#ADADAD",
-      "t": "#000000",
-      "a": 7
-    },
-    "Back Space"
-  ],
-  [
-    "Tab",
-    {
-      "c": "#CDC1B0",
-      "t": "#000000\n#3f76d4\n#d67509",
-      "a": 4
-    },
-    "\n~\nF5\n\n\n\n\n\n\nA",
-    "\n`\nF6\n\n\n\n\n\n\nS",
-    {
-      "t": "#000000\n\n#d67509"
-    },
-    "\n\nF7\n\n\n\n\n\n\nD",
-    "\n\nF8\n\n\n\n\n\n\nF",
-    {
-      "t": "#000000",
-      "a": 7
-    },
-    "G",
-    {
-      "t": "#000000\n\n#d67509",
-      "a": 4
-    },
-    "\n\nE\n\n\n\n\n\n\nH",
-    {
-      "t": "#000000\n#3f76d4\n#d67509"
-    },
-    "\n_\nW\n\n\n\n\n\n\nJ",
-    "\n+\n4\n\n\n\n\n\n\nK",
-    "\n{\n5\n\n\n\n\n\n\nL",
-    "\n}\n6\n\n\n\n\n\n\n:\n;",
-    "\n\\\nTab\n\n\n\n\n\n\n\"\n'"
-  ],
-  [
-    {
-      "c": "#ADADAD",
-      "t": "#000000",
-      "a": 7
-    },
-    "Shift",
-    {
-      "c": "#CDC1B0",
-      "t": "#000000\n\n#d67509",
-      "a": 4
-    },
-    "\n\nF9\n\n\n\n\n\n\nZ",
-    "\n\nF10\n\n\n\n\n\n\nX",
-    "\n\nF11\n\n\n\n\n\n\nC",
-    "\n\nF12\n\n\n\n\n\n\nV",
-    {
-      "t": "#000000",
-      "a": 7
-    },
-    "B",
-    {
-      "t": "#000000\n\n#d67509",
-      "a": 4
-    },
-    "\n\n+\n\n\n\n\n\n\nN",
-    {
-      "t": "#000000\n#3f76d4\n#d67509"
-    },
-    "\n-\n-\n\n\n\n\n\n\nM",
-    "\n=\n1\n\n\n\n\n\n\n<\n,",
-    "\n[\n2\n\n\n\n\n\n\n>\n.",
-    "\n]\n3\n\n\n\n\n\n\n?\n/",
-    {
-      "c": "#ADADAD",
-      "t": "#000000",
-      "a": 7
-    },
-    "Return"
-  ],
-  [
-    "Fn",
-    "Ctrl",
-    "Alt",
-    "Meta",
-    {
-      "c": "#9FACBF"
-    },
-    "&dArr;",
-    {
-      "c": "#CDC1B0"
-    },
-    "",
-    "",
-    {
-      "c": "#E5A65B"
-    },
-    "&uArr;",
-    {
-      "c": "#ADADAD",
-      "t": "#000000\n#3f76d4\n#d67509",
-      "a": 4
-    },
-    "\nHome\n0\n\n\n\n\n\n\n&larr;",
-    "\nPDwn\n.\n\n\n\n\n\n\n&darr;",
-    "\nPUp\nShift\n\n\n\n\n\n\n&uarr;",
-    "\nEnd\nReturn\n\n\n\n\n\n\n&rarr;"
-  ]
-]

keyboards/planck/keymaps/aviator/keymap.c

@@ -1,198 +0,0 @@
-/* Copyright 2017 John Ramsay
- * Aviator Keymap v1.0
- *
- * Designed for aeronautical data entry on the OLKB Planck.
- */
-
- #include "planck.h"
- #include "action_layer.h"
-
- extern keymap_config_t keymap_config;
-
- enum planck_layers {
-   _QWERTY,
-   _DATA,
-   _LOWER,
-   _RAISE,
-   _ADJUST
- };
-
- enum planck_keycodes {
-   QWERTY = SAFE_RANGE,
-   DATA,
-   LOWER,
-   RAISE,
-   BACKLIT
- };
-
-#define _______ KC_TRNS
-#define ___x___ KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Qwerty
- * ,-----------------------------------------------------------------------------------.
- * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_QWERTY] = {
-  {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
-  {KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
-  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
-  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
-},
-
-/* Data
- * ,-----------------------------------------------------------------------------------.
- * | Esc  | Home |  Up  | End  |      |      |   N  |   S  |   7  |   8  |   9  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Tab  | Left | Down | Right|      |      |   E  |   W  |   4  |   5  |   6  | Tab  |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |      |   +  |   -  |   1  |   2  |   3  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise |   0  |   .  |Shift |Enter |
- * `-----------------------------------------------------------------------------------'
- */
-[_DATA] = {
-  {KC_ESC,  KC_HOME, KC_UP,   KC_END,   ___x___, ___x___, KC_N,    KC_S,    KC_7, KC_8,   KC_9,    KC_BSPC},
-  {KC_TAB,  KC_LEFT, KC_DOWN, KC_RIGHT, ___x___, ___x___, KC_E,    KC_W,    KC_4, KC_5,   KC_6,    KC_TAB},
-  {KC_LSFT, KC_Z,    KC_X,    KC_C,     KC_V,    ___x___, KC_PLUS, KC_MINS, KC_1, KC_2,   KC_3,    KC_ENT},
-  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI,  LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_0, KC_DOT, KC_RSFT, KC_ENT}
-},
-
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * | Del  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |   ~  |   `  |      |      |      |      |   _  |   +  |   {  |   }  |  \   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |   -  |   =  |   [  |   ]  |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Home |Pg Dn |Pg Up | End  |
- * `-----------------------------------------------------------------------------------'
- */
-[_LOWER] = {
-  {KC_DEL,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
-  {_______, KC_TILD, KC_GRV,  ___x___, ___x___, ___x___, ___x___, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_BSLS},
-  {_______, ___x___, ___x___, ___x___, ___x___, ___x___, ___x___, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______},
-  {_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END}
-},
-
-/* Raise
- * ,-----------------------------------------------------------------------------------.
- * | Del  |  F1  |  F2  |  F3  |  F4  |      |   N  |   S  |   7  |   8  |   9  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |  F5  |  F6  |  F7  |  F8  |      |   E  |   W  |   4  |   5  |   6  | Tab  |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F9  |  F10 |  F11 |  F12 |      |   +  |   -  |   1  |   2  |   3  |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      |   0  |   .  |Shift |Enter |
- * `-----------------------------------------------------------------------------------'
- */
-[_RAISE] = {
-  {KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   ___x___, KC_N,    KC_S,    KC_7, KC_8,   KC_9,    KC_BSPC},
-  {_______, KC_F5,   KC_F6,   KC_F7,   KC_F8,   ___x___, KC_E,    KC_W,    KC_4, KC_5,   KC_6,    KC_TAB},
-  {_______, KC_F9,   KC_F10,  KC_F11,  KC_F12,  ___x___, KC_PLUS, KC_MINS, KC_1, KC_2,   KC_3,    _______,},
-  {_______, _______, _______, _______, _______, _______, _______, _______, KC_0, KC_DOT, KC_RSFT, KC_ENT}
-},
-
-/* Adjust (Lower + Raise)
- * ,-----------------------------------------------------------------------------------.
- * | Esc  | Reset| Debug|      |      |      |      |      |      |      |      |  Del |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty| Data |      |      |      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      |      |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-[_ADJUST] = {
-  {KC_ESC,  RESET,   DEBUG,   ___x___, ___x___, ___x___, ___x___, ___x___, ___x___, ___x___, ___x___, KC_DEL},
-  {_______, ___x___, ___x___, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  DATA,    ___x___, ___x___, _______},
-  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  ___x___, ___x___, ___x___, ___x___, _______},
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
-}
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        set_single_persistent_default_layer(_QWERTY);
-        breathing_self_disable();
-      }
-      return false;
-      break;
-    case DATA:
-      if (record->event.pressed) {
-        set_single_persistent_default_layer(_DATA);
-        #ifdef BACKLIGHT_ENABLE
-          breathing_speed_set(3);
-          breathing_enable();
-        #endif
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        uint8_t default_layer = biton32(default_layer_state);
-        if (default_layer == _QWERTY) {
-          #ifdef BACKLIGHT_ENABLE
-            breathing_speed_set(3);
-            breathing_enable();
-          #endif
-        }
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        uint8_t default_layer = biton32(default_layer_state);
-        if (default_layer == _QWERTY) {
-          breathing_self_disable();
-        }
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        uint8_t default_layer = biton32(default_layer_state);
-        if (default_layer == _QWERTY) {
-          #ifdef BACKLIGHT_ENABLE
-            breathing_speed_set(3);
-            breathing_enable();
-          #endif
-        }
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        uint8_t default_layer = biton32(default_layer_state);
-        if (default_layer == _QWERTY) {
-          breathing_self_disable();
-        }
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case BACKLIT:
-      if (record->event.pressed) {
-        register_code(KC_RSFT);
-        #ifdef BACKLIGHT_ENABLE
-          backlight_step();
-        #endif
-      } else {
-        unregister_code(KC_RSFT);
-      }
-      return false;
-      break;
-  }
-  return true;
-}

keyboards/planck/keymaps/aviator/readme.md

@@ -1,68 +0,0 @@
-# The Aviator
-
-Designed for aeronautical data entry on the OLKB Planck.
-
-![Imgur](https://i.imgur.com/lj6uMYI.png)
-
-## Layers
-
-````
-Qwerty
-,-----------------------------------------------------------------------------------.
-| Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
-|------+------+------+------+------+-------------+------+------+------+------+------|
-| Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
-|------+------+------+------+------+------|------+------+------+------+------+------|
-| Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
-|------+------+------+------+------+------+------+------+------+------+------+------|
-| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
-`-----------------------------------------------------------------------------------'
-
-Data
-,-----------------------------------------------------------------------------------.
-| Esc  | Home |  Up  | End  |      |      |   N  |   S  |   7  |   8  |   9  | Bksp |
-|------+------+------+------+------+-------------+------+------+------+------+------|
-| Tab  | Left | Down | Right|      |      |   E  |   W  |   4  |   5  |   6  | Tab  |
-|------+------+------+------+------+------|------+------+------+------+------+------|
-| Shift|   Z  |   X  |   C  |   V  |      |   +  |   -  |   1  |   2  |   3  |Enter |
-|------+------+------+------+------+------+------+------+------+------+------+------|
-| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise |   0  |   .  |Shift |Enter |
-`-----------------------------------------------------------------------------------'
-
-Lower
-,-----------------------------------------------------------------------------------.
-| Del  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
-|------+------+------+------+------+-------------+------+------+------+------+------|
-|      |   ~  |   `  |      |      |      |      |   _  |   +  |   {  |   }  |  \   |
-|------+------+------+------+------+------|------+------+------+------+------+------|
-|      |      |      |      |      |      |      |   -  |   =  |   [  |   ]  |      |
-|------+------+------+------+------+------+------+------+------+------+------+------|
-|      |      |      |      |      |             |      | Home |Pg Dn |Pg Up | End  |
-`-----------------------------------------------------------------------------------'
-
-Raise
-,-----------------------------------------------------------------------------------.
-| Del  |  F1  |  F2  |  F3  |  F4  |      |   N  |   S  |   7  |   8  |   9  | Bksp |
-|------+------+------+------+------+-------------+------+------+------+------+------|
-|      |  F5  |  F6  |  F7  |  F8  |      |   E  |   W  |   4  |   5  |   6  | Tab  |
-|------+------+------+------+------+------|------+------+------+------+------+------|
-|      |  F9  |  F10 |  F11 |  F12 |      |   +  |   -  |   1  |   2  |   3  |      |
-|------+------+------+------+------+------+------+------+------+------+------+------|
-|      |      |      |      |      |             |      |   0  |   .  |Shift |Enter |
-`-----------------------------------------------------------------------------------'
-
-Adjust (Lower + Raise)
-,-----------------------------------------------------------------------------------.
-| Esc  | Reset| Debug|      |      |      |      |      |      |      |      |  Del |
-|------+------+------+------+------+-------------+------+------+------+------+------|
-|      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty| Data |      |      |      |
-|------+------+------+------+------+------|------+------+------+------+------+------|
-|      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
-|------+------+------+------+------+------+------+------+------+------+------+------|
-|      |      |      |      |      |             |      |      |      |      |      |
-`-----------------------------------------------------------------------------------'
-````
-
-## Notes
-
-Supports LED backlighting.

keyboards/planck/keymaps/aviator/rules.mk

@@ -1 +0,0 @@
-BACKLIGHT_ENABLE = yes

keyboards/planck/keymaps/cbbrowne/keymap.c

@@ -220,7 +220,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
       {
 	layer_on(_RAISE);
 #ifdef BACKLIGHT_ENABLE
-	breathing_period_set(2);
+	breathing_speed_set(2);
 	breathing_pulse();
 #endif
 	update_tri_layer(_LOWER, _RAISE, _ADJUST);
@@ -236,7 +236,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
       {
 	layer_on(_LOWER);
 #ifdef BACKLIGHT_ENABLE
-	breathing_period_set(2);
+	breathing_speed_set(2);
 	breathing_pulse();
 #endif
 	update_tri_layer(_LOWER, _RAISE, _ADJUST);

keyboards/planck/keymaps/experimental/keymap.c

@@ -242,7 +242,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
           if (record->event.pressed) {
             layer_on(_LOWER);
             #ifdef BACKLIGHT_ENABLE
-                breathing_period_set(2);
+                breathing_speed_set(2);
                 breathing_pulse();
             #endif
             update_tri_layer(_LOWER, _RAISE, _ADJUST);
@@ -256,7 +256,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
           if (record->event.pressed) {
             layer_on(_RAISE);
             #ifdef BACKLIGHT_ENABLE
-                breathing_period_set(2);
+                breathing_speed_set(2);
                 breathing_pulse();
             #endif
             update_tri_layer(_LOWER, _RAISE, _ADJUST);

keyboards/planck/keymaps/fabian/Makefile

@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/planck/keymaps/khord/keymap.c

@@ -128,12 +128,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
       break;
     case MACRO_BREATH_SPEED_INC:
       if (record->event.pressed) {
-        breathing_period_inc();
+        breathing_speed_inc(1);
       }
       break;
     case MACRO_BREATH_SPEED_DEC:
       if (record->event.pressed) {
-        breathing_period_dec();
+        breathing_speed_dec(1);
       }
       break;
     case MACRO_BREATH_DEFAULT:

keyboards/planck/keymaps/matrixman/Makefile

@@ -0,0 +1,5 @@
+MOUSEKEY_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/planck/keymaps/pvc/keymap.c

@@ -323,14 +323,14 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case MACRO_BREATH_SPEED_INC:
             if (record->event.pressed)
             {
-                breathing_period_inc();
+                breathing_speed_inc(1);
             }
             break;
 
         case MACRO_BREATH_SPEED_DEC:
             if (record->event.pressed)
             {
-                breathing_period_dec();
+                breathing_speed_dec(1);
             }
             break;
 
@@ -352,7 +352,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             if (record->event.pressed)
             {
                 layer_on(LAYER_UPPER);
-                breathing_period_set(2);
+                breathing_speed_set(2);
                 breathing_pulse();
                 update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
             }
@@ -367,7 +367,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             if (record->event.pressed)
             {
                 layer_on(LAYER_LOWER);
-                breathing_period_set(2);
+                breathing_speed_set(2);
                 breathing_pulse();
                 update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
             }
@@ -381,13 +381,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case MACRO_FUNCTION:
             if (record->event.pressed)
             {
-                breathing_period_set(3);
+                breathing_speed_set(3);
                 breathing_enable();
                 layer_on(LAYER_FUNCTION);
             }
             else
             {
-                breathing_period_set(1);
+                breathing_speed_set(1);
                 breathing_self_disable();
                 layer_off(LAYER_FUNCTION);
             }

keyboards/planck/keymaps/zach/zach_common_functions.c

@@ -270,7 +270,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
                     PLAY_SONG(tone_ctrl_mod);
                 #endif
                 #ifdef BACKLIGHT_BREATHING
-                    breathing_period_set(2);
+                    breathing_speed_set(2);
                     breathing_pulse();
                 #endif
             }

keyboards/planck/keymaps/zrichard/keymap.c

@@ -332,14 +332,14 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case MACRO_BREATH_SPEED_INC:
             if (record->event.pressed)
             {
-                breathing_period_inc();
+                breathing_speed_inc(1);
             }
             break;
 
         case MACRO_BREATH_SPEED_DEC:
             if (record->event.pressed)
             {
-                breathing_period_dec();
+                breathing_speed_dec(1);
             }
             break;
 
@@ -361,7 +361,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             if (record->event.pressed)
             {
                 layer_on(LAYER_UPPER);
-                breathing_period_set(2);
+                breathing_speed_set(2);
                 breathing_pulse();
                 update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
             }
@@ -376,7 +376,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             if (record->event.pressed)
             {
                 layer_on(LAYER_LOWER);
-                breathing_period_set(2);
+                breathing_speed_set(2);
                 breathing_pulse();
                 update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
             }
@@ -390,13 +390,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case MACRO_FUNCTION:
             if (record->event.pressed)
             {
-                breathing_period_set(3);
+                breathing_speed_set(3);
                 breathing_enable();
                 layer_on(LAYER_FUNCTION);
             }
             else
             {
-                breathing_period_set(1);
+                breathing_speed_set(1);
                 breathing_self_disable();
                 layer_off(LAYER_FUNCTION);
             }

keyboards/planck/rules.mk

@@ -65,7 +65,7 @@ CONSOLE_ENABLE = yes         # Console for debug(+400)
 COMMAND_ENABLE = no        # Commands for debug and configuration
 NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = yes            # MIDI controls
+MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = yes           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/preonic/keymaps/zach/zach_common_functions.c

@@ -270,7 +270,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
                     PLAY_SONG(tone_ctrl_mod);
                 #endif
                 #ifdef BACKLIGHT_BREATHING
-                    breathing_period_set(2);
+                    breathing_speed_set(2);
                     breathing_pulse();
                 #endif
             }

keyboards/vision_division/keymaps/default/keymap.c

@@ -406,21 +406,21 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
   case MACRO_BREATH_SPEED_INC:
     if (record->event.pressed)
     {
-      breathing_period_inc();
+      breathing_speed_inc(1);
     }
     break;
 
   case MACRO_BREATH_SPEED_DEC:
     if (record->event.pressed)
     {
-      breathing_period_dec();
+      breathing_speed_dec(1);
     }
     break;
 
   case MACRO_BREATH_DEFAULT:
     if (record->event.pressed)
     {
-      breathing_period_default();
+      breathing_defaults();
     }
     break;
 
@@ -435,7 +435,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
     if (record->event.pressed)
     {
       layer_on(LAYER_UPPER);
-      breathing_period_set(2);
+      breathing_speed_set(2);
       breathing_pulse();
       update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
     }
@@ -450,7 +450,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
     if (record->event.pressed)
     {
       layer_on(LAYER_LOWER);
-      breathing_period_set(2);
+      breathing_speed_set(2);
       breathing_pulse();
       update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
     }
@@ -464,13 +464,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
   case MACRO_FUNCTION:
     if (record->event.pressed)
     {
-      breathing_period_set(3);
+      breathing_speed_set(3);
       breathing_enable();
       layer_on(LAYER_FUNCTION);
     }
     else
     {
-      breathing_period_set(1);
+      breathing_speed_set(1);
       breathing_self_disable();
       layer_off(LAYER_FUNCTION);
     }

keyboards/viterbi/keymaps/drashna/config.h

@@ -18,12 +18,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include QMK_KEYBOARD_CONFIG_H
-
+#include "../../config.h"
 
 /* Use I2C or Serial, not both */
-// #define USE_SERIAL
-#define USE_I2C
+
+#define USE_SERIAL
+// #define USE_I2C
 
 /* Select hand configuration */
 
@@ -31,26 +31,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
-#ifdef RGBLIGHT_ENABLE
 #undef RGBLED_NUM
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 16
+#define RGBLED_NUM 12
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
 #define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
 #define RGBLIGHT_EFFECT_BREATHE_CENTER 1
-#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 300
-#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1
 
-#endif // RGBLIGHT_ENABLE
 
 #ifdef AUDIO_ENABLE
 #define C6_AUDIO
 #endif
 
-#undef LOCKING_SUPPORT_ENABLE
-#undef LOCKING_RESYNC_ENABLE
 
 #endif

keyboards/viterbi/keymaps/drashna/keymap.c

@@ -1,4 +1,6 @@
 #include QMK_KEYBOARD_H
+#include "action_layer.h"
+#include "eeconfig.h"
 #include "drashna.h"
 
 extern keymap_config_t keymap_config;
@@ -19,84 +21,67 @@ extern keymap_config_t keymap_config;
 #define MEDIA    TG(_MEDIA)
 #define COVECUBE TG(_COVECUBE)
 
-#ifdef FAUXCLICKY_ENABLE
-float fauxclicky_pressed_note[2] = MUSICAL_NOTE(_A6, 2);  // (_D4, 0.25);
-float fauxclicky_released_note[2] = MUSICAL_NOTE(_A6, 2); // (_C4, 0.125);
-float fauxclicky_beep_note[2] = MUSICAL_NOTE(_C6, 2);       // (_C4, 0.25);
-#define AUD_ON  FC_ON
-#define AUD_OFF FC_OFF
-#else
-#define AUD_ON  AU_ON
-#define AUD_OFF AU_OFF
-#endif 
-
 enum more_custom_keycodes {
-  KC_P00 = NEW_SAFE_RANGE
+  KC_KP_00 = NEW_SAFE_RANGE
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_NUMLOCK] = KEYMAP(
-      LMACRO,  DIABLO,  GAMEPAD, KC_NLCK, KC_SLCK, KC_COLN, KC_PSLS,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      MEDIA,   KC_CALC, COVECUBE,KC_P7,   KC_P8,   KC_P9,   KC_PAST,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_HOME, KC_DEL,  KC_PGUP, KC_P4,   KC_P5,   KC_P6,   KC_PMNS,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_END,  KC_UP,   KC_PGDN, KC_P1,   KC_P2,   KC_P3,   KC_PPLS,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_COLN, KC_PENT,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
+      LMACRO,      DIABLO,      GAMEPAD,     KC_NLCK, KC_SLCK, KC_COLN, KC_PSLS,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      MEDIA,       KC_CALC,     COVECUBE,    KC_P7,   KC_P8,   KC_P9,   KC_PAST,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_HOME,     KC_DEL,      KC_PGUP,     KC_P4,   KC_P5,   KC_P6,   KC_PMNS,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_END,      KC_UP,       KC_PGDN,     KC_P1,   KC_P2,   KC_P3,   KC_PPLS,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_LEFT,     KC_DOWN,     KC_RGHT,     KC_P0,   KC_KP_00,KC_PDOT, KC_PENT,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
   ),
 
   [_DIABLO] = KEYMAP(
-      KC_ESC,  DIABLO,  KC_V,    KC_D,    XXXXXXX, XXXXXXX, KC_L,                     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_TAB,  KC_S,    KC_F,    KC_I,    KC_M,    KC_T,    KC_J,                     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_Q,    KC_1,    KC_2,    KC_3,    KC_4,    KC_G,    KC_F,                     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_LCTL, KC_D3_3, KC_D3_3, KC_D3_3, KC_D3_3, KC_Z,    KC_DIABLO_CLEAR,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_LALT, KC_F4,   KC_F5,   KC_F8,   KC_F9,   KC_F10,  SFT_T(KC_SPACE),          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
+      KC_ESC,      DIABLO,      KC_V,        KC_D,        XXXXXXX,     XXXXXXX,     KC_L,                     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_TAB,      KC_S,        KC_F,        KC_I,        KC_M,        KC_T,        KC_J,                     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_Q,        KC_1,        KC_2,        KC_3,        KC_4,        KC_G,        KC_F,                     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_LCTL,     TD(TD_D3_1), TD(TD_D3_2), TD(TD_D3_3), TD(TD_D3_4), KC_Z,        KC_DIABLO_CLEAR,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_LALT,     KC_F4,       KC_F5,       KC_F8,       KC_F9,       KC_F10,      SFT_T(KC_SPACE),          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
   ),
 
   [_GAMEPAD] = KEYMAP(  // Game pad layout designed primarily for Overwatch
-      LMACRO,  KC_ESC,  GAMEPAD, KC_1,    KC_2,    KC_3,    KC_4,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      MEDIA,   KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_Z,    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_Y,    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_F1,   KC_U,    KC_I,    KC_Y,    KC_V,    KC_SPC,  KC_V,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
+      LMACRO,      KC_ESC,      GAMEPAD,     KC_1,        KC_2,        KC_3,        KC_4,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      MEDIA,       KC_TAB,      KC_Q,        KC_W,        KC_E,        KC_R,        KC_T,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_Z,        KC_LCTL,     KC_A,        KC_S,        KC_D,        KC_F,        KC_G,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_Y,        KC_LSFT,     KC_Z,        KC_X,        KC_C,        KC_V,        KC_B,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_F1,       KC_U,        KC_I,        KC_Y,        KC_V,        KC_SPC,      KC_V,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
   ),
 
   [_MACROS] = KEYMAP(
-      LMACRO,      KC_OVERWATCH,GAMEPAD,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      LMACRO,      XXXXXXX,     GAMEPAD,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
       XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
       KC_SYMM,     KC_TORB,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_GLHF,     KC_GOODGAME, KC_GGEZ,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_GLHF,     KC_GOODGAME, XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
       KC_SALT,     KC_MORESALT, KC_SALTHARD, KC_JUSTGAME, KC_AIM,      XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
   ),
 
   [_COVECUBE] = KEYMAP(
+      COVECUBE,    XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
       XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      XXXXXXX,     XXXXXXX,     COVECUBE,    XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
       XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
       XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
       XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,     XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
   ),
 
   [_MEDIA] = KEYMAP(
-      KC_MAKE, KC_RESET,XXXXXXX, AUD_ON,  AUD_OFF, XXXXXXX, RGB_SAD,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      MEDIA,   XXXXXXX, KC_RGB_T,RGB_M_P, RGB_M_B, RGB_M_R, RGB_SAI,         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      RGB_TOG, RGB_MOD, RGB_RMOD,RGB_M_SW,RGB_M_SN,RGB_M_K, RGB_HUD,         XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_MPLY, KC_MPRV, KC_MNXT, RGB_M_X, RGB_M_G, RGB_M_P, RGB_HUI,        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-      KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, RGB_VAD, RGB_VAI,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
+      KC_RESET,KC_MAKE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      MEDIA,   XXXXXXX, RGB_SAI, RGB_VAI, RGB_M_P, RGB_M_B, RGB_M_R,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      RGB_TOG, RGB_MOD, RGB_SAD, RGB_VAD, RGB_M_SW,RGB_M_SN,RGB_M_K,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_MPLY, KC_MSTP, KC_MPRV, KC_MNXT, RGB_M_K, RGB_M_X, RGB_M_G,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
   )
 
 
 };
 
-void matrix_init_keymap(void) {
-  DDRD &= ~(1<<5);
-  PORTD &= ~(1<<5);
 
-  DDRB &= ~(1<<0);
-  PORTB &= ~(1<<0);
-}
 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
-  case KC_P00:
+  case KC_KP_00:
     if (record->event.pressed) {
       register_code(KC_KP_0);
       unregister_code(KC_KP_0);

keyboards/viterbi/keymaps/drashna/rules.mk

@@ -5,3 +5,8 @@ RGBLIGHT_ENABLE   = yes
 MOUSEKEY_ENABLE   = no
 NKRO_ENABLE       = yes
 
+EXTRAFLAGS        = -flto
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/xd75/keymaps/atomic_style/Makefile

@@ -0,0 +1,18 @@
+# Copyright 2013 Jun Wako <wakojun@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/xd75/keymaps/cbbrowne/keymap.c

@@ -265,7 +265,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
       {
 	layer_on(_RAISE);
 #ifdef BACKLIGHT_ENABLE
-	breathing_period_set(2);
+	breathing_speed_set(2);
 	breathing_pulse();
 #endif
 	update_tri_layer(_LOWER, _RAISE, _ADJUST);
@@ -281,7 +281,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
       {
 	layer_on(_LOWER);
 #ifdef BACKLIGHT_ENABLE
-	breathing_period_set(2);
+	breathing_speed_set(2);
 	breathing_pulse();
 #endif
 	update_tri_layer(_LOWER, _RAISE, _ADJUST);

keyboards/xd75/keymaps/kim-kim-xd73/Makefile

@@ -0,0 +1,21 @@
+# Copyright 2013 Jun Wako <wakojun@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
+
+BACKLIGHT_ENABLE = yes

keyboards/xd75/keymaps/kim-kim/Makefile

@@ -0,0 +1,21 @@
+# Copyright 2013 Jun Wako <wakojun@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
+
+BACKLIGHT_ENABLE = yes

quantum/audio/audio.c

@@ -151,16 +151,16 @@ void audio_init()
 
         #ifdef C6_AUDIO
             DDRC |= _BV(PORTC6);
-        //#else
-        //    DDRC |= _BV(PORTC6); // Why is PC6 being set as output low, if C6_audio isn't defined?
-        //    PORTC &= ~_BV(PORTC6); 
+        #else
+            DDRC |= _BV(PORTC6);
+            PORTC &= ~_BV(PORTC6);
         #endif
 
         #ifdef B5_AUDIO
             DDRB |= _BV(PORTB5);
-        //#else
-        //    DDRB |= _BV(PORTB5); // Same as with PC6
-        //    PORTB &= ~_BV(PORTB5);
+        #else
+            DDRB |= _BV(PORTB5);
+            PORTB &= ~_BV(PORTB5);
         #endif
 
         #ifdef C6_AUDIO

quantum/audio/song_list.h

@@ -247,12 +247,6 @@
     Q__NOTE(_GS5),     \
     HD_NOTE(_C6),
 
-#define ZELDA_TREASURE \
-    Q__NOTE(_A4), \
-    Q__NOTE(_AS4), \
-    Q__NOTE(_B4), \
-    HD_NOTE(_C5), \
-
 #define TERMINAL_SOUND \
     E__NOTE(_C5 )
 

quantum/keymap_common.c

@@ -127,11 +127,8 @@ action_t action_for_key(uint8_t layer, keypos_t key)
             action.code = ACTION_MODS_TAP_KEY(mod, keycode & 0xFF);
             break;
     #ifdef BACKLIGHT_ENABLE
-        case BL_ON:
-            action.code = ACTION_BACKLIGHT_ON();
-            break;
-        case BL_OFF:
-            action.code = ACTION_BACKLIGHT_OFF();
+        case BL_0 ... BL_15:
+            action.code = ACTION_BACKLIGHT_LEVEL(keycode - BL_0);
             break;
         case BL_DEC:
             action.code = ACTION_BACKLIGHT_DECREASE();

quantum/quantum.c

@@ -23,10 +23,6 @@
 #define TAPPING_TERM 200
 #endif
 
-#ifndef BREATHING_PERIOD
-#define BREATHING_PERIOD 6
-#endif
-
 #include "backlight.h"
 extern backlight_config_t backlight_config;
 
@@ -622,17 +618,7 @@ bool process_record_quantum(keyrecord_t *record) {
       }
 
       send_keyboard_report();
-      return false;
     }
-
-#if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_BREATHING)
-    case BL_BRTG: {
-      if (record->event.pressed)
-        breathing_toggle();
-      return false;
-    }
-#endif
-
     default: {
       shift_interrupted[0] = true;
       shift_interrupted[1] = true;
@@ -845,7 +831,6 @@ void matrix_scan_quantum() {
 
 static const uint8_t backlight_pin = BACKLIGHT_PIN;
 
-// depending on the pin, we use a different output compare unit
 #if BACKLIGHT_PIN == B7
 #  define COM1x1 COM1C1
 #  define OCR1x  OCR1C
@@ -856,18 +841,17 @@ static const uint8_t backlight_pin = BACKLIGHT_PIN;
 #  define COM1x1 COM1A1
 #  define OCR1x  OCR1A
 #else
-#  define NO_HARDWARE_PWM
+#  define NO_BACKLIGHT_CLOCK
 #endif
 
 #ifndef BACKLIGHT_ON_STATE
 #define BACKLIGHT_ON_STATE 0
 #endif
 
-#ifdef NO_HARDWARE_PWM // pwm through software
-
 __attribute__ ((weak))
 void backlight_init_ports(void)
 {
+
   // Setup backlight pin as output and output to on state.
   // DDRx |= n
   _SFR_IO8((backlight_pin >> 4) + 1) |= _BV(backlight_pin & 0xF);
@@ -878,15 +862,83 @@ void backlight_init_ports(void)
     // PORTx |= n
     _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF);
   #endif
+
+  #ifndef NO_BACKLIGHT_CLOCK
+    // Use full 16-bit resolution.
+    ICR1 = 0xFFFF;
+
+    // I could write a wall of text here to explain... but TL;DW
+    // Go read the ATmega32u4 datasheet.
+    // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+
+    // Pin PB7 = OCR1C (Timer 1, Channel C)
+    // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+    // (i.e. start high, go low when counter matches.)
+    // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+    // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+
+    TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
+    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+  #endif
+
+  backlight_init();
+  #ifdef BACKLIGHT_BREATHING
+    breathing_defaults();
+  #endif
 }
 
 __attribute__ ((weak))
-void backlight_set(uint8_t level) {}
+void backlight_set(uint8_t level)
+{
+  // Prevent backlight blink on lowest level
+  // #if BACKLIGHT_ON_STATE == 0
+  //   // PORTx &= ~n
+  //   _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+  // #else
+  //   // PORTx |= n
+  //   _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF);
+  // #endif
+
+  if ( level == 0 ) {
+    #ifndef NO_BACKLIGHT_CLOCK
+      // Turn off PWM control on backlight pin, revert to output low.
+      TCCR1A &= ~(_BV(COM1x1));
+      OCR1x = 0x0;
+    #else
+      // #if BACKLIGHT_ON_STATE == 0
+      //   // PORTx |= n
+      //   _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF);
+      // #else
+      //   // PORTx &= ~n
+      //   _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+      // #endif
+    #endif
+  }
+  #ifndef NO_BACKLIGHT_CLOCK
+    else if ( level == BACKLIGHT_LEVELS ) {
+      // Turn on PWM control of backlight pin
+      TCCR1A |= _BV(COM1x1);
+      // Set the brightness
+      OCR1x = 0xFFFF;
+    }
+    else {
+      // Turn on PWM control of backlight pin
+      TCCR1A |= _BV(COM1x1);
+      // Set the brightness
+      OCR1x = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
+    }
+  #endif
+
+  #ifdef BACKLIGHT_BREATHING
+    breathing_intensity_default();
+  #endif
+}
 
 uint8_t backlight_tick = 0;
 
 void backlight_task(void) {
-  if ((0xFFFF >> ((BACKLIGHT_LEVELS - get_backlight_level()) * ((BACKLIGHT_LEVELS + 1) / 2))) & (1 << backlight_tick)) {
+  #ifdef NO_BACKLIGHT_CLOCK
+  if ((0xFFFF >> ((BACKLIGHT_LEVELS - backlight_config.level) * ((BACKLIGHT_LEVELS + 1) / 2))) & (1 << backlight_tick)) {
     #if BACKLIGHT_ON_STATE == 0
       // PORTx &= ~n
       _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
@@ -903,216 +955,232 @@ void backlight_task(void) {
       _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
     #endif
   }
-  backlight_tick = backlight_tick + 1 % 16;
+  backlight_tick = (backlight_tick + 1) % 16;
+  #endif
 }
 
 #ifdef BACKLIGHT_BREATHING
-#error "Backlight breathing only available with hardware PWM. Please disable."
-#endif
 
-#else // pwm through timer
-
-#define TIMER_TOP 0xFFFFU
-
-// See http://jared.geek.nz/2013/feb/linear-led-pwm
-static uint16_t cie_lightness(uint16_t v) {
-  if (v <= 5243) // if below 8% of max
-    return v / 9; // same as dividing by 900%
-  else {
-    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
-    // to get a useful result with integer division, we shift left in the expression above
-    // and revert what we've done again after squaring.
-    y = y * y * y >> 8;
-    if (y > 0xFFFFUL) // prevent overflow
-      return 0xFFFFU;
-    else
-      return (uint16_t) y;
-  }
-}
-
-// range for val is [0..TIMER_TOP]. PWM pin is high while the timer count is below val.
-static inline void set_pwm(uint16_t val) {
-  OCR1x = val;
-}
-
-__attribute__ ((weak))
-void backlight_set(uint8_t level) {
-  if (level > BACKLIGHT_LEVELS)
-    level = BACKLIGHT_LEVELS;
-
-  if (level == 0) {
-    // Turn off PWM control on backlight pin
-    TCCR1A &= ~(_BV(COM1x1));
-  } else {
-    // Turn on PWM control of backlight pin
-    TCCR1A |= _BV(COM1x1);
-  }
-  // Set the brightness
-  set_pwm(cie_lightness(TIMER_TOP * (uint32_t)level / BACKLIGHT_LEVELS));
-}
-
-void backlight_task(void) {}
-
-#ifdef BACKLIGHT_BREATHING
+#ifdef NO_BACKLIGHT_CLOCK
+void breathing_defaults(void) {}
+void breathing_intensity_default(void) {}
+#else
 
 #define BREATHING_NO_HALT  0
 #define BREATHING_HALT_OFF 1
 #define BREATHING_HALT_ON  2
-#define BREATHING_STEPS 128
 
-static uint8_t breathing_period = BREATHING_PERIOD;
-static uint8_t breathing_halt = BREATHING_NO_HALT;
-static uint16_t breathing_counter = 0;
-
-bool is_breathing(void) {
-    return !!(TIMSK1 & _BV(TOIE1));
-}
-
-#define breathing_interrupt_enable() do {TIMSK1 |= _BV(TOIE1);} while (0)
-#define breathing_interrupt_disable() do {TIMSK1 &= ~_BV(TOIE1);} while (0)
-#define breathing_min() do {breathing_counter = 0;} while (0)
-#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
+static uint8_t breath_intensity;
+static uint8_t breath_speed;
+static uint16_t breathing_index;
+static uint8_t breathing_halt;
 
 void breathing_enable(void)
 {
-  breathing_counter = 0;
-  breathing_halt = BREATHING_NO_HALT;
-  breathing_interrupt_enable();
+    if (get_backlight_level() == 0)
+    {
+        breathing_index = 0;
+    }
+    else
+    {
+        // Set breathing_index to be at the midpoint (brightest point)
+        breathing_index = 0x20 << breath_speed;
+    }
+
+    breathing_halt = BREATHING_NO_HALT;
+
+    // Enable breathing interrupt
+    TIMSK1 |= _BV(OCIE1A);
 }
 
 void breathing_pulse(void)
 {
     if (get_backlight_level() == 0)
-      breathing_min();
+    {
+        breathing_index = 0;
+    }
     else
-      breathing_max();
+    {
+        // Set breathing_index to be at the midpoint + 1 (brightest point)
+        breathing_index = 0x21 << breath_speed;
+    }
+
     breathing_halt = BREATHING_HALT_ON;
-    breathing_interrupt_enable();
+
+    // Enable breathing interrupt
+    TIMSK1 |= _BV(OCIE1A);
 }
 
 void breathing_disable(void)
 {
-    breathing_interrupt_disable();
-    // Restore backlight level
+    // Disable breathing interrupt
+    TIMSK1 &= ~_BV(OCIE1A);
     backlight_set(get_backlight_level());
 }
 
 void breathing_self_disable(void)
 {
-  if (get_backlight_level() == 0)
-    breathing_halt = BREATHING_HALT_OFF;
-  else
-    breathing_halt = BREATHING_HALT_ON;
+    if (get_backlight_level() == 0)
+    {
+        breathing_halt = BREATHING_HALT_OFF;
+    }
+    else
+    {
+        breathing_halt = BREATHING_HALT_ON;
+    }
+
+    //backlight_set(get_backlight_level());
 }
 
-void breathing_toggle(void) {
-  if (is_breathing())
-    breathing_disable();
-  else
-    breathing_enable();
-}
-
-void breathing_period_set(uint8_t value)
+void breathing_toggle(void)
 {
-  if (!value)
-    value = 1;
-  breathing_period = value;
+    if (!is_breathing())
+    {
+        if (get_backlight_level() == 0)
+        {
+            breathing_index = 0;
+        }
+        else
+        {
+            // Set breathing_index to be at the midpoint + 1 (brightest point)
+            breathing_index = 0x21 << breath_speed;
+        }
+
+        breathing_halt = BREATHING_NO_HALT;
+    }
+
+    // Toggle breathing interrupt
+    TIMSK1 ^= _BV(OCIE1A);
+
+    // Restore backlight level
+    if (!is_breathing())
+    {
+        backlight_set(get_backlight_level());
+    }
 }
 
-void breathing_period_default(void) {
-  breathing_period_set(BREATHING_PERIOD);
-}
-
-void breathing_period_inc(void)
+bool is_breathing(void)
 {
-  breathing_period_set(breathing_period+1);
+    return (TIMSK1 && _BV(OCIE1A));
 }
 
-void breathing_period_dec(void)
+void breathing_intensity_default(void)
 {
-  breathing_period_set(breathing_period-1);
+    //breath_intensity = (uint8_t)((uint16_t)100 * (uint16_t)get_backlight_level() / (uint16_t)BACKLIGHT_LEVELS);
+    breath_intensity = ((BACKLIGHT_LEVELS - get_backlight_level()) * ((BACKLIGHT_LEVELS + 1) / 2));
 }
 
-/* To generate breathing curve in python:
- * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
+void breathing_intensity_set(uint8_t value)
+{
+    breath_intensity = value;
+}
+
+void breathing_speed_default(void)
+{
+    breath_speed = 4;
+}
+
+void breathing_speed_set(uint8_t value)
+{
+    bool is_breathing_now = is_breathing();
+    uint8_t old_breath_speed = breath_speed;
+
+    if (is_breathing_now)
+    {
+        // Disable breathing interrupt
+        TIMSK1 &= ~_BV(OCIE1A);
+    }
+
+    breath_speed = value;
+
+    if (is_breathing_now)
+    {
+        // Adjust index to account for new speed
+        breathing_index = (( (uint8_t)( (breathing_index) >> old_breath_speed ) ) & 0x3F) << breath_speed;
+
+        // Enable breathing interrupt
+        TIMSK1 |= _BV(OCIE1A);
+    }
+
+}
+
+void breathing_speed_inc(uint8_t value)
+{
+    if ((uint16_t)(breath_speed - value) > 10 )
+    {
+        breathing_speed_set(0);
+    }
+    else
+    {
+        breathing_speed_set(breath_speed - value);
+    }
+}
+
+void breathing_speed_dec(uint8_t value)
+{
+    if ((uint16_t)(breath_speed + value) > 10 )
+    {
+        breathing_speed_set(10);
+    }
+    else
+    {
+        breathing_speed_set(breath_speed + value);
+    }
+}
+
+void breathing_defaults(void)
+{
+    breathing_intensity_default();
+    breathing_speed_default();
+    breathing_halt = BREATHING_NO_HALT;
+}
+
+/* Breathing Sleep LED brighness(PWM On period) table
+ * (64[steps] * 4[duration]) / 64[PWM periods/s] = 4 second breath cycle
+ *
+ * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63
+ * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i }
  */
-static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+static const uint8_t breathing_table[64] PROGMEM = {
+  0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   1,   2,   4,   6,  10,
+ 15,  23,  32,  44,  58,  74,  93, 113, 135, 157, 179, 199, 218, 233, 245, 252,
+255, 252, 245, 233, 218, 199, 179, 157, 135, 113,  93,  74,  58,  44,  32,  23,
+ 15,  10,   6,   4,   2,   1,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
+};
 
-// Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) {
-  return v / BACKLIGHT_LEVELS * get_backlight_level();
-}
-
-/* Assuming a 16MHz CPU clock and a timer that resets at 64k (ICR1), the following interrupt handler will run
- * about 244 times per second.
- */
-ISR(TIMER1_OVF_vect)
+ISR(TIMER1_COMPA_vect)
 {
-  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
-  // resetting after one period to prevent ugly reset at overflow.
-  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
-  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
+    // OCR1x = (pgm_read_byte(&breathing_table[ ( (uint8_t)( (breathing_index++) >> breath_speed ) ) & 0x3F ] )) * breath_intensity;
 
-  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
-      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
-  {
-      breathing_interrupt_disable();
-  }
 
-  set_pwm(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
+    uint8_t local_index = ( (uint8_t)( (breathing_index++) >> breath_speed ) ) & 0x3F;
+
+    if (((breathing_halt == BREATHING_HALT_ON) && (local_index == 0x20)) || ((breathing_halt == BREATHING_HALT_OFF) && (local_index == 0x3F)))
+    {
+        // Disable breathing interrupt
+        TIMSK1 &= ~_BV(OCIE1A);
+    }
+
+    OCR1x = (uint16_t)(((uint16_t)pgm_read_byte(&breathing_table[local_index]) * 257)) >> breath_intensity;
+
 }
 
-#endif // BACKLIGHT_BREATHING
-
-__attribute__ ((weak))
-void backlight_init_ports(void)
-{
-  // Setup backlight pin as output and output to on state.
-  // DDRx |= n
-  _SFR_IO8((backlight_pin >> 4) + 1) |= _BV(backlight_pin & 0xF);
-  #if BACKLIGHT_ON_STATE == 0
-    // PORTx &= ~n
-    _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
-  #else
-    // PORTx |= n
-    _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF);
-  #endif
-  // I could write a wall of text here to explain... but TL;DW
-  // Go read the ATmega32u4 datasheet.
-  // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
-
-  // Pin PB7 = OCR1C (Timer 1, Channel C)
-  // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
-  // (i.e. start high, go low when counter matches.)
-  // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
-  // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
-
-  /*
-  14.8.3:
-  "In fast PWM mode, the compare units allow generation of PWM waveforms on the OCnx pins. Setting the COMnx1:0 bits to two will produce a non-inverted PWM [..]."
-  "In fast PWM mode the counter is incremented until the counter value matches either one of the fixed values 0x00FF, 0x01FF, or 0x03FF (WGMn3:0 = 5, 6, or 7), the value in ICRn (WGMn3:0 = 14), or the value in OCRnA (WGMn3:0 = 15)."
-  */
-
-  TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
-  TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
-  // Use full 16-bit resolution. Counter counts to ICR1 before reset to 0.
-  ICR1 = TIMER_TOP;
-
-  backlight_init();
-  #ifdef BACKLIGHT_BREATHING
-    breathing_enable();
-  #endif
-}
-
-#endif // NO_HARDWARE_PWM
+#endif // NO_BACKLIGHT_CLOCK
+#endif // breathing
 
 #else // backlight
 
 __attribute__ ((weak))
-void backlight_init_ports(void) {}
+void backlight_init_ports(void)
+{
+
+}
 
 __attribute__ ((weak))
-void backlight_set(uint8_t level) {}
+void backlight_set(uint8_t level)
+{
+
+}
 
 #endif // backlight
 
@@ -1228,3 +1296,42 @@ __attribute__ ((weak))
 void shutdown_user() {}
 
 //------------------------------------------------------------------------------
+
+#ifdef CONSOLE_IN_ENABLE
+
+__attribute__ ((weak))
+void process_console_data_user(uint8_t * data, uint8_t length) {
+}
+
+__attribute__ ((weak))
+void process_console_data_kb(uint8_t * data, uint8_t length) {
+  process_console_data_user(data, length);
+}
+
+void process_console_data_quantum(uint8_t * data, uint8_t length) {
+  // This can be used for testing - it echos back the information received
+  // print("Received message:\n  ");
+  // while (*data) {
+  //   sendchar(*data);
+  //   data++;
+  // }
+  switch (data[0]) {
+    case 0x01:
+      print("Saying hello\n");
+      #ifdef AUDIO_ENABLE
+        audio_on();
+      #endif
+      break;
+    case 0xFE:
+    #ifdef CONSOLE_IN_BOOTLOADER
+      print("Entering bootloader\n");
+      reset_keyboard();
+    #else
+      print("Unable to enter bootloader\n");
+    #endif
+      break;
+  }
+  process_console_data_kb(data, length);
+}
+
+#endif

quantum/quantum.h

@@ -173,11 +173,12 @@ void breathing_self_disable(void);
 void breathing_toggle(void);
 bool is_breathing(void);
 
+void breathing_defaults(void);
 void breathing_intensity_default(void);
-void breathing_period_default(void);
-void breathing_period_set(uint8_t value);
-void breathing_period_inc(void);
-void breathing_period_dec(void);
+void breathing_speed_default(void);
+void breathing_speed_set(uint8_t value);
+void breathing_speed_inc(uint8_t value);
+void breathing_speed_dec(uint8_t value);
 #endif
 
 #endif
@@ -192,4 +193,10 @@ void led_set_kb(uint8_t usb_led);
 
 void api_send_unicode(uint32_t unicode);
 
+#ifdef CONSOLE_IN_ENABLE
+void process_console_data_user(uint8_t * data, uint8_t length);
+void process_console_data_kb(uint8_t * data, uint8_t length);
+void process_console_data_quantum(uint8_t * data, uint8_t length);
+#endif
+
 #endif

quantum/quantum_keycodes.h

@@ -380,13 +380,26 @@ enum quantum_keycodes {
 #endif // MIDI_ADVANCED
 
     // Backlight functionality
-    BL_ON,
-    BL_OFF,
+    BL_0,
+    BL_1,
+    BL_2,
+    BL_3,
+    BL_4,
+    BL_5,
+    BL_6,
+    BL_7,
+    BL_8,
+    BL_9,
+    BL_10,
+    BL_11,
+    BL_12,
+    BL_13,
+    BL_14,
+    BL_15,
     BL_DEC,
     BL_INC,
     BL_TOGG,
     BL_STEP,
-    BL_BRTG,
 
     // RGB functionality
     RGB_TOG,
@@ -566,6 +579,9 @@ enum quantum_keycodes {
 #define AG_SWAP MAGIC_SWAP_ALT_GUI
 #define AG_NORM MAGIC_UNSWAP_ALT_GUI
 
+#define BL_ON  BL_9
+#define BL_OFF BL_0
+
 // GOTO layer - 16 layers max
 // when:
 // ON_PRESS    = 1

tmk_core/common/action.c

@@ -512,11 +512,8 @@ void process_action(keyrecord_t *record, action_t action)
                     case BACKLIGHT_STEP:
                         backlight_step();
                         break;
-                    case BACKLIGHT_ON:
-                        backlight_level(BACKLIGHT_LEVELS);
-                        break;
-                    case BACKLIGHT_OFF:
-                        backlight_level(0);
+                    case BACKLIGHT_LEVEL:
+                        backlight_level(action.backlight.level);
                         break;
                 }
             }

tmk_core/common/action_code.h

@@ -304,8 +304,7 @@ enum backlight_opt {
     BACKLIGHT_DECREASE = 1,
     BACKLIGHT_TOGGLE   = 2,
     BACKLIGHT_STEP     = 3,
-    BACKLIGHT_ON       = 4,
-    BACKLIGHT_OFF      = 5,
+    BACKLIGHT_LEVEL    = 4,
 };
 
 /* Macro */
@@ -317,8 +316,7 @@ enum backlight_opt {
 #define ACTION_BACKLIGHT_DECREASE()     ACTION(ACT_BACKLIGHT, BACKLIGHT_DECREASE << 8)
 #define ACTION_BACKLIGHT_TOGGLE()       ACTION(ACT_BACKLIGHT, BACKLIGHT_TOGGLE << 8)
 #define ACTION_BACKLIGHT_STEP()         ACTION(ACT_BACKLIGHT, BACKLIGHT_STEP << 8)
-#define ACTION_BACKLIGHT_ON()           ACTION(ACT_BACKLIGHT, BACKLIGHT_ON << 8)
-#define ACTION_BACKLIGHT_OFF()          ACTION(ACT_BACKLIGHT, BACKLIGHT_OFF << 8)
+#define ACTION_BACKLIGHT_LEVEL(level)   ACTION(ACT_BACKLIGHT, BACKLIGHT_LEVEL << 8 | (level))
 /* Command */
 #define ACTION_COMMAND(id, opt)         ACTION(ACT_COMMAND,  (opt)<<8 | (id))
 /* Function */

tmk_core/common/backlight.c

@@ -61,8 +61,6 @@ void backlight_decrease(void)
 void backlight_toggle(void)
 {
     backlight_config.enable ^= 1;
-    if (backlight_config.raw == 1) // enabled but level = 0
-        backlight_config.level = 1;
     eeconfig_update_backlight(backlight_config.raw);
     dprintf("backlight toggle: %u\n", backlight_config.enable);
     backlight_set(backlight_config.enable ? backlight_config.level : 0);
@@ -83,9 +81,7 @@ void backlight_step(void)
 
 void backlight_level(uint8_t level)
 {
-    if (level > BACKLIGHT_LEVELS)
-        level = BACKLIGHT_LEVELS;
-    backlight_config.level = level;
+    backlight_config.level ^= level;
     backlight_config.enable = !!backlight_config.level;
     eeconfig_update_backlight(backlight_config.raw);
     backlight_set(backlight_config.level);

tmk_core/protocol/lufa/descriptor.h

@@ -208,8 +208,11 @@ typedef struct
 
 #ifdef CONSOLE_ENABLE
 #   define CONSOLE_IN_EPNUM         (RAW_OUT_EPNUM + 1)
-//#   define CONSOLE_OUT_EPNUM        (RAW_OUT_EPNUM + 2)
-#   define CONSOLE_OUT_EPNUM        (RAW_OUT_EPNUM + 1)
+#   ifdef CONSOLE_IN_ENABLE
+#       define CONSOLE_OUT_EPNUM        (RAW_OUT_EPNUM + 2)
+#   else
+#       define CONSOLE_OUT_EPNUM        (RAW_OUT_EPNUM + 1)
+#   endif
 #else
 #   define CONSOLE_OUT_EPNUM        RAW_OUT_EPNUM
 #endif

tmk_core/protocol/lufa/lufa.c

@@ -264,6 +264,14 @@ static void raw_hid_task(void)
  * Console
  ******************************************************************************/
 #ifdef CONSOLE_ENABLE
+
+static bool console_flush = false;
+#define CONSOLE_FLUSH_SET(b)   do { \
+  ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {\
+    console_flush = b; \
+  } \
+} while (0)
+
 static void Console_Task(void)
 {
     /* Device must be connected and configured for the task to run */
@@ -272,49 +280,62 @@ static void Console_Task(void)
 
     uint8_t ep = Endpoint_GetCurrentEndpoint();
 
-#if 0
-    // TODO: impl receivechar()/recvchar()
-    Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM);
+    #ifdef CONSOLE_IN_ENABLE
+      /* Create a temporary buffer to hold the read in report from the host */
+      uint8_t ConsoleData[CONSOLE_EPSIZE];
+      bool data_read = false;
 
-    /* Check to see if a packet has been sent from the host */
-    if (Endpoint_IsOUTReceived())
-    {
-        /* Check to see if the packet contains data */
-        if (Endpoint_IsReadWriteAllowed())
-        {
-            /* Create a temporary buffer to hold the read in report from the host */
-            uint8_t ConsoleData[CONSOLE_EPSIZE];
+      // TODO: impl receivechar()/recvchar()
+      Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM);
 
-            /* Read Console Report Data */
-            Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL);
+      /* Check to see if a packet has been sent from the host */
+      if (Endpoint_IsOUTReceived())
+      {
+          /* Check to see if the packet contains data */
+          if (Endpoint_IsReadWriteAllowed())
+          {
 
+              /* Read Console Report Data */
+              Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL);
+              data_read = true;
+          }
+
+          /* Finalize the stream transfer to send the last packet */
+          Endpoint_ClearOUT();
+
+          if (data_read) {
             /* Process Console Report Data */
-            //ProcessConsoleHIDReport(ConsoleData);
-        }
+            process_console_data_quantum(ConsoleData, sizeof(ConsoleData));
+          }
 
-        /* Finalize the stream transfer to send the last packet */
-        Endpoint_ClearOUT();
-    }
-#endif
+      }
 
-    /* IN packet */
-    Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
-    if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
-        Endpoint_SelectEndpoint(ep);
-        return;
-    }
+    #endif
 
-    // fill empty bank
-    while (Endpoint_IsReadWriteAllowed())
-        Endpoint_Write_8(0);
+    if (console_flush) {
+      /* IN packet */
+      Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
+      if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
+          Endpoint_SelectEndpoint(ep);
+          return;
+      }
 
-    // flash senchar packet
-    if (Endpoint_IsINReady()) {
-        Endpoint_ClearIN();
+      // fill empty bank
+      while (Endpoint_IsReadWriteAllowed())
+          Endpoint_Write_8(0);
+
+      // flash senchar packet
+      if (Endpoint_IsINReady()) {
+          Endpoint_ClearIN();
+      }
+      // CONSOLE_FLUSH_SET(false);
+      console_flush = false;
     }
 
     Endpoint_SelectEndpoint(ep);
+
 }
+
 #endif
 
 
@@ -380,13 +401,8 @@ void EVENT_USB_Device_WakeUp()
 
 
 
-#ifdef CONSOLE_ENABLE
-static bool console_flush = false;
-#define CONSOLE_FLUSH_SET(b)   do { \
-  ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {\
-    console_flush = b; \
-  } \
-} while (0)
+// #ifdef CONSOLE_ENABLE
+#if 0
 
 // called every 1ms
 void EVENT_USB_Device_StartOfFrame(void)
@@ -395,9 +411,9 @@ void EVENT_USB_Device_StartOfFrame(void)
     if (++count % 50) return;
     count = 0;
 
-    if (!console_flush) return;
+    //if (!console_flush) return;
     Console_Task();
-    console_flush = false;
+    //console_flush = false;
 }
 
 #endif
@@ -440,10 +456,10 @@ void EVENT_USB_Device_ConfigurationChanged(void)
     /* Setup Console HID Report Endpoints */
     ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
                                      CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
-#if 0
+  #ifdef CONSOLE_IN_ENABLE
     ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
                                      CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
-#endif
+  #endif
 #endif
 
 #ifdef NKRO_ENABLE
@@ -1101,7 +1117,7 @@ static void setup_usb(void)
     USB_Init();
 
     // for Console_Task
-    USB_Device_EnableSOFEvents();
+    //USB_Device_EnableSOFEvents();
     print_set_sendchar(sendchar);
 }
 
@@ -1216,6 +1232,10 @@ int main(void)
         raw_hid_task();
 #endif
 
+#ifdef CONSOLE_ENABLE
+        Console_Task();
+#endif
+
 #if !defined(INTERRUPT_CONTROL_ENDPOINT)
         USB_USBTask();
 #endif

users/drashna/drashna.c

@@ -16,6 +16,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "drashna.h"
+#include "quantum.h"
+#include "action.h"
 #include "version.h"
 
 #if (__has_include("secrets.h"))
@@ -448,8 +450,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
        ":dfu"
 #elif defined(BOOTLOADER_HALFKAY)
       ":teensy"
-//#elif defined(BOOTLOADER_CATERINA)
-//       ":avrdude"
+#elif defined(BOOTLOADER_CATERINA)
+       ":avrdude"
 #endif
 #ifdef RGBLIGHT_ENABLE
         " RGBLIGHT_ENABLE=yes"
@@ -570,7 +572,6 @@ uint32_t layer_state_set_user(uint32_t state) {
     case _COVECUBE:
       rgblight_set_green;
       rgblight_mode(2);
-      break;
     default:
       if (default_layer & (1UL << _COLEMAK)) {
         rgblight_set_magenta;

users/drashna/drashna.h

@@ -45,27 +45,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MODS_ALT_MASK  (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
 #define MODS_GUI_MASK  (MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI))
 
-#ifndef RGBLIGHT_ANIMATIONS // add "EXTRA_FLADS=-DDRASHNA_SETRGB" to enable this ... but don't
-#define rgblight_set_blue        rgblight_setrgb (0x00,  0x00, 0xFF);
-#define rgblight_set_red         rgblight_setrgb (0xFF,  0x00, 0x00);
-#define rgblight_set_green       rgblight_setrgb (0x00,  0xFF, 0x00);
-#define rgblight_set_orange      rgblight_setrgb (0xFF,  0x80, 0x00);
-#define rgblight_set_teal        rgblight_setrgb (0x00,  0xFF, 0xFF);
-#define rgblight_set_magenta     rgblight_setrgb (0xFF,  0x00, 0xFF);
-#define rgblight_set_yellow      rgblight_setrgb (0xFF,  0xFF, 0x00);
-#define rgblight_set_purple      rgblight_setrgb (0x7A,  0x00, 0xFF);
-#define rgblight_set_white       rgblight_setrgb (0xFF,  0xFF, 0xFF);
-#else
+#ifdef RGBLIGHT_ENABLE
 #define rgblight_set_blue        rgblight_sethsv (0xFF,  0xFF, 0xFF);
 #define rgblight_set_red         rgblight_sethsv (0x00,  0xFF, 0xFF);
 #define rgblight_set_green       rgblight_sethsv (0x78,  0xFF, 0xFF);
 #define rgblight_set_orange      rgblight_sethsv (0x1E,  0xFF, 0xFF);
-#define rgblight_set_teal        rgblight_sethsv (0xB4,  0xFF, 0xFF);
+#define rgblight_set_teal        rgblight_sethsv (0xC3,  0xFF, 0xFF);
 #define rgblight_set_magenta     rgblight_sethsv (0x12C, 0xFF, 0xFF);
 #define rgblight_set_yellow      rgblight_sethsv (0x3C,  0xFF, 0xFF);
 #define rgblight_set_purple      rgblight_sethsv (0x10E, 0xFF, 0xFF);
 #define rgblight_set_white       rgblight_sethsv (0x00,  0x00, 0xFF);
-#endif // DRASHNA_SETRGB
+#endif
 
 extern bool is_overwatch;
 extern bool rgb_layer_change;
@@ -113,17 +103,6 @@ enum {
 };
 #endif
 
-#ifdef TAP_DANCE_ENABLE
-#define KC_D3_1 TD(TD_D3_1)
-#define KC_D3_2 TD(TD_D3_2)
-#define KC_D3_3 TD(TD_D3_3)
-#define KC_D3_4 TD(TD_D3_4)
-#else
-#define KC_D3_1 KC_1
-#define KC_D3_2 KC_2
-#define KC_D3_3 KC_3
-#define KC_D3_4 KC_4
-#endif
 
 #define QMK_KEYS_PER_SCAN 8
 
@@ -131,6 +110,4 @@ enum {
 #define RGBLIGHT_SLEEP
 #endif
 
-#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
-
 #endif

users/drashna/readme.md

@@ -4,26 +4,19 @@ Overview
 This is my personal userspace file.  Most of my code exists here, as it's heavily shared. 
 
 
-Custom userspace handlers
--------------------------
-
-Specifically QMK works by using customized handlers for everything. This allows for multiple levels of customization.
-
-`matrix_scan` calls `matrix_scan_quantum`, which alls `matrix_scan_kb`, which calls `matrix_scan_user`. 
-`process_record` calls a bunch of stuff, but eventually calls `process_record_kb` which calls `process_record_user`
-The same goes for `matrix_init`, `layer_state_set`, `led_set`, and a few other functions.  
+Custom handlers
+---------------
 
 All (most) `_user` functions are handled here instead.  To allow keyboard specific configuration, I've created `_keymap` functions that can be called by the keymap.c files instead.
 
 This allows for keyboard specific configuration while maintaining the ability to customize the board. 
 
-My [Ergodox EZ Keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/ergodox_ez/keymaps/drashna/keymap.c#L399) is a good example of this, as it uses the LEDs as modifier indicators.
-
+My Ergodox EZ Keymap is a good example of this, as it uses the LEDs as modifier indicators.
 
 Custom Keycodes
 ---------------
 
-Keycodes are defined in the drashna.h file and need to be included in the keymap.c files, so that they can be used there. 
+Keycods are defined in the drashna.h file and need to be included in the keymap.c files, so that they can be used there. 
 
 A bunch of macros are present and are only included on boards that are not the Ergodox EZ or Orthodox, as they are not needed for those boards. 
 

users/drashna/rules.mk

@@ -1,3 +1,3 @@
 
 SRC += drashna.c
-EXTRAFLAGS        += -flto
+EXTRAFLAGS        = -flto

users/turbomech/backupturbomech.c

@@ -1,390 +0,0 @@
-/* Copyright 2017 @TurboMech /u/TurboMech <discord> @A9entOran9e#6134
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "turbomech.h"
-#include "quantum.h"
-//#include "action_layer.h"
-#include "action.h"
-//#include "rgblight.h"
-
-__attribute__ ((weak))
-void matrix_init_keymap(void) {}
-
-__attribute__ ((weak))
-void matrix_scan_keymap(void) {}
-
-__attribute__ ((weak))
-bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-__attribute__ ((weak))
-uint32_t layer_state_set_keymap (uint32_t state) {
-  return state;
-}
-__attribute__ ((weak))
-void led_set_keymap(uint8_t usb_led) {}
-
-//#define default_layer _QWERTY (0)
-//extern keymap_config_t keymap_config;
-
-extern rgblight_config_t rgblight_config;
-
-
-//#ifdef RGBLIGHT_ENABLE
-/*change the rgblight_setrgb(#, #, #) to what you want CAPS lock - currenlty red*/
- //#define rgblight_set_caps       rgblight_setrgb(255, 0, 0)
- //#define rgblight_base           rgblight_mode(RGB_current_mode)
-//#endif
-//
-//bool rgb_layer_change = true;
-//bool RGB_INIT = false;
-//bool TOG_STATUS = false;
-#ifdef RGBLIGHT_ENABLE
-bool rgb_layer_change = true;
-#endif
-int RGB_current_mode;
-
-/*void matrix_init_user(void) {
-  #ifdef RGBLIGHT_ENABLE
-  rgblight_enable();
-  if (true) {
-  eeconfig_read_rgblight();
-  rgblight_get_mode();
-  eeconfig_update_rgblight_default();
-
-
- // eeconfig_debug_rgblight();
-  //rgblight_init();
-  }
-  #endif
-
-}
-*/
-
-/*void matrix_init_user(void) {
-  #ifdef RGBLIGHT_ENABLE
-  eeconfig_read_rgblight();
-  eeconfig_update_rgblight_default();
-  //rgblight_init();
-  //rgblight_mode(RGB_current_mode);
-  //rgblight_mode(RGB_current_mode);
-  //RGB_current_mode = rgblight_config.mode;
-  #endif
-}*/
-
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-  default_layer = _QWERTY;
- // eeconfig_update_rgblight(rgblight_config.raw);
-}
-
- //Setting ADJUST layer RGB back to default
-/*void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
-    rgblight_mode(RGB_current_mode);
-    layer_on(layer1);
-  } else {
-    layer_off(layer2);
-  }
-}*/
-
-
-void matrix_init_user(void) {
-
-  uint8_t default_layer = eeconfig_read_default_layer();
-
-  rgblight_enable();
-
-  if(true) {
-   if (default_layer & (1UL << _QWERTY)) {
-      //RGB_current_mode = rgblight_config.mode;
-      rgblight_mode(11);
-      }
- else {
-      rgblight_mode (12);
-      }
-
-    /*else if (default_layer & (1UL << _DVORAK)) {
-      rgblight_set_green;
-    }
-    //else if (default_layer & (1UL << _WORKMAN)) {
-      rgblight_set_purple;
-    }
-    else {
-      rgblight_set_teal;*/
-
-
-  }
-
-
-}
-
-static bool is_capslocked = false;
-void led_set_user(uint8_t usb_led) {
-  if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-    is_capslocked = true;
-   //     DDRB |= (1 << 2); PORTB &= ~(1 << 2);
-  } else {
-    is_capslocked = false;
-  //  DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
-  }
-}
-  //rgblight_set();
-
-
-//static uint8_t is_capslocked = false;
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case _QWERTY:
-      persistent_default_layer_set(1UL << _QWERTY);
-      return false;
-      break;
-    case KC_MAKE_ALU84:
-      if (!record->event.pressed) {
-        SEND_STRING("make alu84:TurboMech:dfu");
-        SEND_STRING(SS_TAP(X_ENTER));
-    }
-    return false;
-    break;
-    case KC_QMK:
-      if (!record->event.pressed) {
-        SEND_STRING("cd QMK/qmk_firmware");
-        SEND_STRING(SS_TAP(X_ENTER));
-      }
-      return false;
-      break;
-    case KC_RESET:
-      if (!record->event.pressed) {
-        #ifdef RGBLIGHT_ENABLE
-          rgblight_enable();
-          rgblight_mode(1);
-          rgblight_setrgb(255, 255, 255);
-        #endif
-        //_delay_ms(2000);
-        reset_keyboard();
-      }
-      return false;
-      break;
-    /*case RGB_MOD:
-      //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
-      if (record->event.pressed) {
-       rgblight_mode(RGB_current_mode);
-       RGB_current_mode = rgblight_config.mode;
-        rgblight_step();
-       // rgblight_mode(RGB_current_mode);
-     //RGB_current_mode = rgblight_config.mode;
-        // _delay_ms(50);
-       // rgblight_set();
-        RGB_current_mode = rgblight_config.mode;
-    }
-      else //if (rgblight_config.enable)
-      {
-        _delay_ms(50);
-        rgblight_set();
-        //rgblight_mode(rgblight_config.mode);
-      // eeconfig_update_rgblight(rgblight_config.raw);
-      }
-
-     return true;
-      break;*/
-
-    /*case MO(1):
-      if (record->event.realeased) {
-        rgblight_mode(1);
-        rgblight_set_red;
-      }
-      return true;
-      break;*/
-
-   /*case KC_CAPS:
-     if (record->event.pressed) {
-        rgblight_mode(RGB_current_mode);
-       register_code(KC_CAPS);
-        rgblight_mode(1);
-        rgblight_set_red;
-      }
-      else {
-        unregister_code(KC_CAPS);
-        rgblight_mode(RGB_current_mode);
-
-      }
-      return false;
-       break;*/
-
-       /* rgblight_mode(RGB_current_mode);
-        register_code(KC_CAPS);
-        rgblight_mode(1);
-        rgblight_set_red;
-      }
-      else {
-        unregister_code(KC_CAPS);
-        rgblight_mode(RGB_current_mode);*/
-
-    //  }
-    //  return true;
-     //  break;
-    /*case KC_RESET:
-      if (record->event.pressed) {
-      layer_off(_FUNCTION);
-      rgblight_mode(RGB_current_mode);
-     RGB_current_mode = rgblight_config.mode;
-      layer_clear();
-      _delay_ms(1000);
-        reset_keyboard();
-     }
-     else{
-      //layer_off(_FUNCTION);
-     _delay_ms(1000);
-     rgblight_mode(RGB_current_mode);
-     RGB_current_mode = rgblight_config.mode;
-
-     //eeconfig_update_rgblight_default();
-      }
-
-      return false;
-      break;
-    }*/
-
-
-      return true;
-      break;
-
-
-
-
-
-/*case RGB_MOD:
-case RGB_SMOD:
-case RGB_HUI:
-case RGB_HUD:
-case RGB_SAI:
-case RGB_SAD:
-case RGB_VAI:
-case RGB_VAD:
-case RGB_MODE_PLAIN:
-case RGB_MODE_BREATHE:
-case RGB_MODE_RAINBOW:
-case RGB_MODE_SWIRL:
-case RGB_MODE_SNAKE:
-case RGB_MODE_KNIGHT:
-case RGB_MODE_XMAS:
-case RGB_MODE_GRADIENT:
-    if (record->event.pressed) {
-      rgb_layer_change = false;
-    }
-    break;
-  }
-  return true;*/
-  }
-
-
- return process_record_keymap(keycode, record);
-
-}
-
-uint32_t layer_state_set_user(uint32_t state) {
-#ifdef RGBLIGHT_ENABLE
-  uint8_t default_layer = eeconfig_read_default_layer();
-  if (rgb_layer_change) {
-    switch (biton32(state)) {
-    case _FUNCTION:
-      rgblight_set_blue;
-     rgblight_mode(1);
-     break;
-    case _QWERTY:
-
-      rgblight_mode(11);
-      break;
-  // case _MOUS:
-    //  rgblight_set_yellow;
-    //  rgblight_mode(1);
-   //   break;
-    //case _MACROS:
-      //rgblight_set_orange;
-      //is_overwatch ? rgblight_mode(17) : rgblight_mode(18);
-      //break;
-    //case _MEDIA:
-      //rgblight_set_green;
-      //rgblight_mode(22);
-      //break;
-    default:
-      if (is_capslocked) {
-        rgblight_mode(1);
-        rgblight_set_red;
-      }
-        else { if (default_layer & (1UL << _QWERTY)) {
-        rgblight_mode(11);
-        }
-
-        else if (default_layer & (1UL << _FUNCTION)) {
-         rgblight_set_cyan;
-        }
-        //else if (default_layer & (1UL << _WORKMAN)) {
-        //  rgblight_set_purple;
-       // }
-        else {
-          rgblight_set_orange;
-        }
-      }
-      rgblight_mode(1);
-      break;
-    }
-  }
-#endif
-  return state;
-}
-
-
-!!** possible for later
-
-void set_single_persistent_default_layer(uint8_t default_layer);
-
-void set_single_persistent_default_layer(uint8_t default_layer) {
-  #if defined(AUDIO_ENABLE) && defined(DEFAULT_LAYER_SONGS)
-    PLAY_SONG(default_layer_songs[default_layer]);
-  #endif
-  eeconfig_update_default_layer(1U<<default_layer);
-  default_layer_set(1U<<default_layer);
-
-void matrix_init_kb(void);
-
-void matrix_init_user(void);
-
-!!** line 31
-
-__attribute__ ((weak))
-void matrix_init_keymap(void) {}
-
-__attribute__ ((weak))
-void matrix_scan_keymap(void) {}
-
-__attribute__ ((weak))
-bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-__attribute__ ((weak))
-uint32_t layer_state_set_keymap (uint32_t state) {
-  return state;
-}
-__attribute__ ((weak))
-void led_set_keymap(uint8_t usb_led) {}
-
-Alt +30C4
-¯\_(ツ)_/¯
-
-Alt +00AF

users/turbomech/turbomech.c

@@ -1,125 +0,0 @@
-/* Copyright 2017 @TurboMech /u/TurboMech <discord> @A9entOran9e#6134
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-//**!! Currently after reboot the set rgb mode does not persist after reboot.  Need to find a way to "save" the rgb mode.  Color remains after reboot though.
-
-#include "turbomech.h"
-#include "quantum.h"
-#include "action_layer.h"
-#include "action.h"
-#include "rgblight.h"
-//#include "process_unicode.h"
-
-extern keymap_config_t keymap_config;
-extern rgblight_config_t rgblight_config;
-bool RGB_INIT = false;
-bool TOG_STATUS = false;
-bool caps_is_active = false;
-int RGB_current_mode;
-
-void matirx_scan_kb (void) {
-  if (RGB_INIT) {}
-  else {
-    RGB_current_mode = rgblight_config.mode;
-    RGB_INIT = true;
-        }
-  rgblight_mode(RGB_current_mode);   // revert RGB to initial mode prior to RGB mode change
-  TOG_STATUS = false;
-}
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-/*void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
-    rgblight_mode(RGB_current_mode);
-    layer_on(layer3);
-  } else {
-    layer_off(layer3);
-  }
-}*/
-
-__attribute__ ((weak))
-bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case KC_CAPS:
-     if (record->event.pressed) {
-        register_code(KC_CAPS);
-        caps_is_active = !caps_is_active;
-      if (caps_is_active) {
-        rgblight_mode(14);
-      }
-      else if (!caps_is_active) {
-        unregister_code(KC_CAPS);
-        rgblight_mode(RGB_current_mode);
-      }
-    }
-    return false;
-    break;
-
-    case RGB_MOD:
-    //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
-    if (record->event.pressed) {
-      rgblight_mode(RGB_current_mode);
-      rgblight_step();
-      RGB_current_mode = rgblight_config.mode;
-      // rgblight_set();
-    }
-    return false;
-    break;
-
-    case KC_RESET:
-    if (record->event.pressed) {
-      rgblight_enable();
-      rgblight_mode(1);
-      rgblight_setrgb(255, 255, 255);
-      //_delay_ms(2000);
-      reset_keyboard();
-    }
-    return false;
-    break;
-
-    /*case _FLIP:  //(╯°□°）╯︵ ┻━┻
-      if (record->event.pressed) {
-       register_code(KC_LPRN);
-       unregister_code(KC_LPRN);
-       register_code(X(0x00B0));
-       unregister_code(X(0x00B0));
-
-        UC(0x256F);
-        PROCESS_UNICODE(UC(0x00B0));
-        SEND_TAP(UC(0x25A1));
-        SEND_TAP(UC(0x00B0));
-        SEND_STRING(")");
-        SEND_TAP(UC(0x256F));
-        SEND_TAP(UC(0xFE35));
-        SEND_TAP(UC(0x253B));
-        SEND_TAP(UC(0x2501));
-        SEND_TAP(UC(0x253B));
-			}
-			return false;
-			break;*/
-
-  return true;
-  break;
-  }
-return process_record_keymap(keycode, record);
-}