trying out some different stuff

keyboards/_xmega/_xmega.c

@@ -0,0 +1 @@
+#include "_xmega.h"

keyboards/_xmega/_xmega.h

@@ -0,0 +1,3 @@
+#include "quantum.h"
+
+#define KEYMAP(k) { { k } }

keyboards/_xmega/config.h

@@ -0,0 +1,48 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    _SPINDLE
+#define PRODUCT         XMEGA
+#define DESCRIPTION     test board
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 1
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0 }
+#define MATRIX_COL_PINS { A0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+// #define BACKLIGHT_PIN B6
+// #define BACKLIGHT_LEVELS 5
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+#undef USE_STATIC_OPTIONS
+#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+#endif

keyboards/_xmega/keymaps/default/keymap.c

@@ -0,0 +1,5 @@
+#include "_xmega.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	KEYMAP(KC_A)
+};

keyboards/_xmega/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atxmega32a4u
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 32000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = XMEGA
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = 48000000
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no

keyboards/ergodox_ez/keymaps/drashna/config.h

@@ -20,7 +20,4 @@
 #define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
 #define ONESHOT_TAP_TOGGLE 2
 
-#undef PRODUCT
-#define PRODUCT         DrashnaDox - Hacked ErgoDox EZ Shine
-
 #endif

keyboards/ergodox_ez/keymaps/drashna/keymap.c

@@ -52,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                 KC_EQUAL,       KC_1,       KC_2,       KC_3,       KC_4,       KC_5,       TG(_MOUS),
                 KC_TAB,         KC_Q,       KC_W,       KC_E,       KC_R,       KC_T,       TG(_DIABLO),
                 KC_BSPACE,      KC_A,       KC_S,       KC_D,       KC_F,       KC_G,
-                KC_LSFT,      LCTL_T(KC_Z),KC_X,       KC_C,       KC_V,       KC_B,       TG(_GAMEPAD),
+                OSM(MOD_LSFT),      LCTL_T(KC_Z),KC_X,       KC_C,       KC_V,       KC_B,       TG(_GAMEPAD),
                 LT(_SYMB,KC_GRAVE),KC_QUOTE, KC_LGUI,    KC_LBRACKET,KC_RBRACKET,
                 
                                     ALT_T(KC_APPLICATION),  KC_LGUI,
@@ -96,7 +96,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   TG(_MOUS),
         KC_TAB,         KC_Q,         KC_W,   KC_F,   KC_P,   KC_G,   TG(_DIABLO),
         KC_BSPC,        KC_A,         KC_R,   KC_S,   KC_T,   KC_D,
-        KC_LSFT,        LCTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   TG(_GAMEPAD),
+        OSM(MOD_LSFT),        LCTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   TG(_GAMEPAD),
         LT(_SYMB,KC_GRV),KC_QUOT,      KC_LGUI,    KC_LBRACKET,KC_RBRACKET,
                                               ALT_T(KC_APP),  KC_LGUI,
                                                               KC_HOME,
@@ -139,7 +139,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_EQL,         KC_1,           KC_2,    KC_3,   KC_4,   KC_5,   TG(_MOUS),
         KC_TAB,         KC_QUOT,        KC_COMM, KC_DOT, KC_P,   KC_Y,   TG(_DIABLO),
         KC_BSPC,        KC_A,           KC_O,    KC_E,   KC_U,   KC_I,
-        KC_LSFT,  LCTL_T(KC_SCLN), KC_Q,    KC_J,   KC_K,   KC_X,   TG(_GAMEPAD),
+        OSM(MOD_LSFT),  LCTL_T(KC_SCLN), KC_Q,    KC_J,   KC_K,   KC_X,   TG(_GAMEPAD),
         LT(_SYMB,KC_GRV),KC_QUOT, KC_LGUI, KC_LBRACKET, KC_RBRACKET,
                                               ALT_T(KC_APP),  KC_LEAD,
                                                               KC_HOME,
@@ -182,7 +182,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   TG(_MOUS),
         KC_TAB,         KC_Q,         KC_D,   KC_R,   KC_W,   KC_B,   TG(_DIABLO),
         KC_BSPC,        KC_A,         KC_S,   KC_H,   KC_T,   KC_G,
-        KC_LSFT,        LCTL_T(KC_Z),  KC_X,   KC_M,   KC_C,   KC_V,   TG(_GAMEPAD),
+        OSM(MOD_LSFT),        LCTL_T(KC_Z),  KC_X,   KC_M,   KC_C,   KC_V,   TG(_GAMEPAD),
         LT(_SYMB,KC_GRV),KC_QUOT,      KC_LGUI,    KC_LBRACKET,KC_RBRACKET,
                                               ALT_T(KC_APP),  KC_LEAD,
                                                               KC_HOME,

keyboards/orthodox/keymaps/drashna/config.h

@@ -27,7 +27,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Use I2C or Serial, not both */
 
 #define USE_SERIAL
-#undef USE_I2C
+// #define USE_I2C
 
 /* Select hand configuration */
 
@@ -71,10 +71,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define STARTUP_SONG SONG(ZELDA_TREASURE)
 #endif
 
-#undef PRODUCT
-#ifdef KEYBOARD_orthodox_rev1
-#define PRODUCT         Drashna Hacked Orthodox Rev.1
-#elif KEYBOARD_orthodox_rev3
-#define PRODUCT         Drashna Hacked Orthodox Rev.3
-#endif
 #endif

keyboards/orthodox/keymaps/drashna/keymap.c

@@ -32,30 +32,42 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
 
+#ifdef FAUXCLICKY_ENABLE
+float fauxclicky_pressed_note[2] = MUSICAL_NOTE(_A6, 2);  // (_D4, 0.25);
+float fauxclicky_released_note[2] = MUSICAL_NOTE(_A6, 2); // (_C4, 0.125);
+float fauxclicky_beep_note[2] = MUSICAL_NOTE(_C6, 2);       // (_C4, 0.25);
+#define AUD_ON  FC_ON
+#define AUD_OFF FC_OFF
+#else
+#define AUD_ON  AU_ON
+#define AUD_OFF AU_OFF
+
+#endif 
+
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 [_QWERTY] = KEYMAP(\
   KC_ESC,     KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                                                                   KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
   KC_TAB,     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,             KC_UP,    KC_DOWN,        KC_LEFT, KC_RIGHT,           KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-  KC_LSFT,CTL_T(KC_Z), KC_X, KC_C,   KC_V,    KC_B,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_N,    KC_M,    KC_COMM, KC_DOT, CTL_T(KC_SLASH), KC_LGUI \
+  OSM(MOD_LSFT),CTL_T(KC_Z), KC_X, KC_C,   KC_V,    KC_B,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_N,    KC_M,    KC_COMM, KC_DOT, CTL_T(KC_SLASH), KC_LGUI \
 ),
 
 [_COLEMAK] = KEYMAP(\
   KC_ESC,     KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,                                                                   KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
   KC_TAB,     KC_A,    KC_R,    KC_S,    KC_T,    KC_D,             KC_UP,    KC_DOWN,        KC_LEFT, KC_RIGHT,          KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
-  KC_LSFT,    CTL_T(KC_Z), KC_X, KC_C,   KC_V,    KC_B,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_K,    KC_M,    KC_COMM, KC_DOT,  CTL_T(KC_SLASH), KC_LGUI \
+  OSM(MOD_LSFT),    CTL_T(KC_Z), KC_X, KC_C,   KC_V,    KC_B,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_K,    KC_M,    KC_COMM, KC_DOT,  CTL_T(KC_SLASH), KC_LGUI \
 ),
 
 [_DVORAK] = KEYMAP(\
   KC_ESC,   KC_QUOT, KC_COMM, KC_DOT, KC_P,     KC_Y,                                                                   KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
   KC_TAB,   KC_A,    KC_O,    KC_E,   KC_U,     KC_I,             KC_UP,    KC_DOWN,        KC_LEFT, KC_RIGHT,          KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, \
-  KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K,    KC_X,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z), KC_LGUI \
+  OSM(MOD_LSFT), CTL_T(KC_SCLN), KC_Q, KC_J, KC_K,    KC_X,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z), KC_LGUI \
 ),
 [_WORKMAN] = KEYMAP(\
   KC_ESC,   KC_QUOT, KC_COMM, KC_DOT, KC_P,     KC_Y,                                                                   KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
   KC_TAB,   KC_A,    KC_O,    KC_E,   KC_U,     KC_I,             KC_UP,    KC_DOWN,        KC_LEFT, KC_RIGHT,          KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, \
-  KC_LSFT,CTL_T(KC_SCLN), KC_Q, KC_J, KC_K,    KC_X,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z), KC_LGUI \
+  OSM(MOD_LSFT), CTL_T(KC_SCLN), KC_Q, KC_J, KC_K,    KC_X,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z), KC_LGUI \
 ),
 
 [_LOWER] = KEYMAP(\
@@ -72,7 +84,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 [_ADJUST] = KEYMAP(\
   KC_MAKE,KC_RESET, _______, _______, _______, _______,                                                                _______, _______, _______, _______, _______, _______,  \
-  RGB_SMOD,RGB_HUI, KC_FXCL, AUD_ON,  AUD_OFF, AG_NORM,          _______, _______,          _______, _______,          AG_SWAP, KC_QWERTY, KC_COLEMAK, KC_DVORAK, KC_WORKMAN, _______, \
+  RGB_SMOD,RGB_HUI, _______, AUD_ON,  AUD_OFF, AG_NORM,          _______, _______,          _______, _______,          AG_SWAP, KC_QWERTY, KC_COLEMAK, KC_DVORAK, KC_WORKMAN, _______, \
   KC_RGB_T,RGB_HUD, MU_ON,   MU_OFF,  MU_TOG,  MU_MOD,  _______, _______, _______,          _______, _______, _______, MAGIC_TOGGLE_NKRO, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY  \
 )
 

keyboards/orthodox/keymaps/drashna/rules.mk

@@ -1,11 +1,7 @@
-BOOTMAGIC_ENABLE  = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE   = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE   = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE    = no         # Console for debug(+400)
-COMMAND_ENABLE    = no        # Commands for debug and configuration
+CONSOLE_ENABLE    = no
 TAP_DANCE_ENABLE  = no
 RGBLIGHT_ENABLE   = yes
-AUDIO_ENABLE      = yes
+AUDIO_ENABLE      = no
+MOUSEKEY_ENABLE   = no
 NKRO_ENABLE       = yes
 FAUXCLICKY_ENABLE = no
-USE_I2C           = no

tmk_core/common/avr/bootloader.c

@@ -6,7 +6,9 @@
 #include <avr/wdt.h>
 #include <util/delay.h>
 #include "bootloader.h"
-#include <avr/boot.h>
+#ifndef __AVR_XMEGA__
+    #include <avr/boot.h>
+#endif
 
 #ifdef PROTOCOL_LUFA
 #include <LUFA/Drivers/USB/USB.h>
@@ -152,7 +154,7 @@ void bootloader_jump(void) {
 
     #else // Assume remaining boards are DFU, even if the flag isn't set
 
-        #ifndef __AVR_ATmega32A__ // no USB - maybe BOOTLOADER_BOOTLOADHID instead though?
+        #ifdef BOOTLOADER_BOOTLOADHID // no USB - maybe BOOTLOADER_BOOTLOADHID instead though?
             UDCON = 1;
             USBCON = (1<<FRZCLK);  // disable USB
             UCSR1B = 0;
@@ -178,6 +180,11 @@ void bootloader_jump(void) {
     #define MCUSR MCUCSR
 #endif
 
+#ifdef __AVR_XMEGA__
+    #define MCUSR RST_STATUS
+    #define WDRF RST_WDRF_bp
+#endif
+
 /* this runs before main() */
 void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3")));
 void bootloader_jump_after_watchdog_reset(void)

tmk_core/common/avr/suspend.c

@@ -20,6 +20,11 @@
 #endif /* AUDIO_ENABLE */
 
 
+#ifdef __AVR_XMEGA__
+
+#define wdt_intr_enable(value) wdt_enable(value)
+
+#else
 
 #define wdt_intr_enable(value)   \
 __asm__ __volatile__ (  \
@@ -37,6 +42,7 @@ __asm__ __volatile__ (  \
     : "r0"  \
 )
 
+#endif
 
 void suspend_idle(uint8_t time)
 {
@@ -134,6 +140,7 @@ void suspend_wakeup_init(void)
 	led_set(host_keyboard_leds());
 }
 
+#ifndef __AVR_XMEGA__
 #ifndef NO_SUSPEND_POWER_DOWN
 /* watchdog timeout */
 ISR(WDT_vect)
@@ -148,3 +155,4 @@ ISR(WDT_vect)
     }
 }
 #endif
+#endif

tmk_core/common/avr/suspend_avr.h

@@ -7,6 +7,7 @@
 #include <avr/wdt.h>
 #include <avr/interrupt.h>
 
+#ifndef __AVR_XMEGA__
 
 #define wdt_intr_enable(value)   \
 __asm__ __volatile__ (  \
@@ -25,3 +26,5 @@ __asm__ __volatile__ (  \
 )
 
 #endif
+
+#endif

tmk_core/common/avr/timer.c

@@ -43,6 +43,7 @@ void timer_init(void)
 #   error "Timer prescaler value is NOT vaild."
 #endif
 
+#ifndef __AVR_XMEGA__
 #ifndef __AVR_ATmega32A__
     // Timer0 CTC mode
     TCCR0A = 0x02;
@@ -58,6 +59,13 @@ void timer_init(void)
     OCR0 = TIMER_RAW_TOP;
     TIMSK = (1 << OCIE0);
 #endif
+#else
+    TCC0.CTRLE = 0x01;         // set timer in 8bit mode (default is 16 bits)
+    TCC0.INTCTRLA = 0x02;     // Interrupt Enable register A (enable INT for tc0 (medium level))
+    TCC0.PER = 132;                // set period to 228 khz
+    TCC0.PERBUF = 132;         // buffer for writing to TCC0.PER.
+    TCC0.CTRLA = prescaler;         // clk=30324000 H
+#endif
 }
 
 inline
@@ -117,11 +125,15 @@ uint32_t timer_elapsed32(uint32_t last)
 }
 
 // excecuted once per 1ms.(excess for just timer count?)
+#ifndef __AVR_XMEGA__
 #ifndef __AVR_ATmega32A__
 #define TIMER_INTERRUPT_VECTOR TIMER0_COMPA_vect
 #else
 #define TIMER_INTERRUPT_VECTOR TIMER0_COMP_vect
 #endif
+#else
+#define TIMER_INTERRUPT_VECTOR TCE0_OVF_vect
+#endif
 ISR(TIMER_INTERRUPT_VECTOR, ISR_NOBLOCK)
 {
     timer_count++;

tmk_core/protocol/lufa/lufa.c

@@ -1082,6 +1082,7 @@ void virtser_send(const uint8_t byte)
  ******************************************************************************/
 static void setup_mcu(void)
 {
+  #ifndef __AVR_XMEGA__
     /* Disable watchdog if enabled by bootloader/fuses */
     MCUSR &= ~(1 << WDRF);
     wdt_disable();
@@ -1091,6 +1092,7 @@ static void setup_mcu(void)
 
     CLKPR = (1 << CLKPCE);
     CLKPR = (0 << CLKPS3) | (0 << CLKPS2) | (0 << CLKPS1) | (0 << CLKPS0);
+  #endif
 }
 
 static void setup_usb(void)

tmk_core/protocol/lufa/lufa.h

@@ -61,6 +61,11 @@ extern host_driver_t lufa_driver;
 }
 #endif
 
+#ifdef __AVR_XMEGA__
+    #define MCUSR RST_STATUS
+    #define WDRF RST_WDRF_bp
+#endif
+
 /* extra report structure */
 typedef struct {
     uint8_t  report_id;

users/drashna/drashna.c

@@ -30,15 +30,6 @@ PROGMEM const char secret[][64] = {
 };
 #endif
 
-#ifdef FAUXCLICKY_ENABLE
-float fauxclicky_pressed_note[2]  = MUSICAL_NOTE(_A6, 2);  // (_D4, 0.25);
-float fauxclicky_released_note[2] = MUSICAL_NOTE(_A6, 2); // (_C4, 0.125);
-#else
-float fauxclicky_pressed[][2]             = SONG(E__NOTE(_A6)); // change to your tastes
-float fauxclicky_released[][2]             = SONG(E__NOTE(_A6)); // change to your tastes
-#endif 
-bool faux_click_enabled = true;
-
 #ifdef TAP_DANCE_ENABLE
 //define diablo macro timer variables
 static uint16_t diablo_timer[4];
@@ -231,22 +222,11 @@ void persistent_default_layer_set(uint16_t default_layer) {
 // Defines actions tor my global custom keycodes. Defined in drashna.h file
 // Then runs the _keymap's recod handier if not processed here
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-
+  
 #ifdef CONSOLE_ENABLE
   xprintf("KL: row: %u, column: %u, pressed: %u\n", record->event.key.col, record->event.key.row, record->event.pressed);
 #endif
 
-#ifdef AUDIO_ENABLE
-  if (faux_click_enabled) {
-    if (record->event.pressed) {
-      PLAY_SONG(fauxclicky_pressed);
-    } else {
-      stop_note(NOTE_A6);
-      PLAY_SONG(fauxclicky_released);
-    }
-  }
-#endif
-
   switch (keycode) {
   case KC_QWERTY:
     if (record->event.pressed) {
@@ -315,7 +295,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     }
     return false;
     break;
-#if !(defined(KEYBOARD_orthodox_rev1) || defined(KEYBOARD_orthodox_rev3) || defined(KEYBOARD_ergodox_ez))
+#if !(defined(KEYBOARD_orthodox_rev1) || defined(KEYBOARD_ergodox_ez))
   case KC_OVERWATCH:
     if (record->event.pressed) {
       is_overwatch = !is_overwatch;
@@ -480,6 +460,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         " AUDIO_ENABLE=yes"
 #else
         " AUDIO_ENABLE=no"
+#endif
+#ifdef FAUXCLICKY_ENABLE
+        " FAUXCLICKY_ENABLE=yes"
+#else
+        " FAUXCLICKY_ENABLE=no" 
 #endif
         SS_TAP(X_ENTER));
     }
@@ -514,12 +499,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     }
     return false;
     break;
-  case KC_FXCL:
-    if (!record->event.pressed) {
-      faux_click_enabled = !faux_click_enabled;
-    }
-    return false;
-    break;
   case KC_RGB_T:  // Because I want the option to go back to normal RGB mode rather than always layer indication
 #ifdef RGBLIGHT_ENABLE
     if (record->event.pressed) {

users/drashna/drashna.h

@@ -101,7 +101,6 @@ enum userspace_custom_keycodes {
   KC_SECRET_3,
   KC_SECRET_4,
   KC_SECRET_5,
-  KC_FXCL,
   NEW_SAFE_RANGE //use "NEWPLACEHOLDER for keymap specific codes
 };
 
@@ -134,12 +133,4 @@ enum {
 
 #define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
 
-#ifdef FAUXCLICKY_ENABLE
-#define AUD_ON  FC_ON
-#define AUD_OFF FC_OFF
-#else
-#define AUD_ON  AU_ON
-#define AUD_OFF AU_OFF
-#endif 
-
 #endif