add keys

This is the final version of my layout.

Overall changes
===============

* Updated to work with QMK master.

Miscellaneous
=============

* The `😂` symbol can be entered with UCIS.
* `LEAD r` now inputs `Right Alt`.

Signed-off-by: Gergely Nagy <me@gergo.csillger.hu>

build_keyboard.mk

@@ -16,6 +16,7 @@ include common.mk
 KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
 TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
 KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
+STM32_PATH := quantum/stm32
 
 # Force expansion
 TARGET := $(TARGET)
@@ -68,6 +69,7 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
     KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
 endif
 
+
 # Pull in rules.mk files from all our subfolders
 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
     include $(KEYBOARD_PATH_5)/rules.mk
@@ -85,6 +87,19 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
     include $(KEYBOARD_PATH_1)/rules.mk
 endif
 
+ifeq ($(strip $(PROTON)), yes)
+    OPT_DEFS += -DPROTON_CONVERSION
+    include $(STM32_PATH)/proton_c.mk
+endif
+
+include quantum/mcu_selection.mk
+
+ifdef MCU_FAMILY
+    OPT_DEFS += -DQMK_STM32
+    KEYBOARD_PATHS += $(STM32_PATH)
+endif
+
+
 # Find all the C source files to be compiled in subfolders.
 KEYBOARD_SRC :=
 

drivers/boards/GENERIC_STM32_F303XC/board.h

@@ -18,14 +18,14 @@
 #define _BOARD_H_
 
 /*
- * Setup for Clueboard 60% Keyboard
+ * Setup for Generic STM32_F303 Board
  */
 
 /*
  * Board identifier.
  */
 #define BOARD_GENERIC_STM32_F303XC
-#define BOARD_NAME                  "Planck PCB"
+#define BOARD_NAME                  "STM32_F303"
 
 /*
  * Board oscillators-related settings.

keyboards/ergodox_ez/config.h

@@ -85,17 +85,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBW 1
 
-/* "debounce" is measured in keyboard scans. Some users reported
- * needing values as high as 15, which was at the time around 50ms.
+/*
+ * The debounce filtering reports a key/switch change directly,
+ * without any extra delay. After that the debounce logic will filter
+ * all further changes, until the key/switch reports the same state for
+ * the given count of scans.
+ * So a perfect switch will get a short debounce period and
+ * a bad key will get a much longer debounce period.
+ * The result is an adaptive debouncing period for each switch.
+ *
  * If you don't define it here, the matrix code will default to
  * 5, which is now closer to 10ms, but still plenty according to
  * manufacturer specs.
- *
- * Default is quite high, because of reports with some production
- * runs seeming to need it. This may change when configuration for
- * this is more directly exposed.
  */
-#define DEBOUNCE    15
+#define DEBOUNCE    10
 
 #define USB_MAX_POWER_CONSUMPTION 500
 

keyboards/ergodox_ez/matrix.c

@@ -57,6 +57,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* matrix state(1:on, 0:off) */
 static matrix_row_t matrix[MATRIX_ROWS];
+/*
+ * matrix state(1:on, 0:off)
+ * contains the raw values without debounce filtering of the last read cycle.
+ */
+static matrix_row_t raw_matrix[MATRIX_ROWS];
 
 // Debouncing: store for each key the number of scans until it's eligible to
 // change.  When scanning the matrix, ignore any changes in keys that have
@@ -118,6 +123,7 @@ void matrix_init(void)
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
         matrix[i] = 0;
+        raw_matrix[i] = 0;
         for (uint8_t j=0; j < MATRIX_COLS; ++j) {
             debounce_matrix[i * MATRIX_COLS + j] = 0;
         }
@@ -151,26 +157,30 @@ void matrix_power_up(void) {
 
 // Returns a matrix_row_t whose bits are set if the corresponding key should be
 // eligible to change in this scan.
-matrix_row_t debounce_mask(uint8_t row) {
+matrix_row_t debounce_mask(matrix_row_t rawcols, uint8_t row) {
   matrix_row_t result = 0;
-  for (uint8_t j=0; j < MATRIX_COLS; ++j) {
-    if (debounce_matrix[row * MATRIX_COLS + j]) {
-      --debounce_matrix[row * MATRIX_COLS + j];
+  matrix_row_t change = rawcols ^ raw_matrix[row];
+  raw_matrix[row] = rawcols;
+  for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
+    if (debounce_matrix[row * MATRIX_COLS + i]) {
+      --debounce_matrix[row * MATRIX_COLS + i];
     } else {
-      result |= (1 << j);
+      result |= (1 << i);
+    }
+    if (change & (1 << i)) {
+      debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
     }
   }
   return result;
 }
 
-// Report changed keys in the given row.  Resets the debounce countdowns
-// corresponding to each set bit in 'change' to DEBOUNCE.
-void debounce_report(matrix_row_t change, uint8_t row) {
-  for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
-    if (change & (1 << i)) {
-      debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
-    }
-  }
+matrix_row_t debounce_read_cols(uint8_t row) {
+  // Read the row without debouncing filtering and store it for later usage.
+  matrix_row_t cols = read_cols(row);
+  // Get the Debounce mask.
+  matrix_row_t mask = debounce_mask(cols, row);
+  // debounce the row and return the result.
+  return (cols & mask) | (matrix[row] & ~mask);;
 }
 
 uint8_t matrix_scan(void)
@@ -214,15 +224,12 @@ uint8_t matrix_scan(void)
         select_row(i + MATRIX_ROWS_PER_SIDE);
         // we don't need a 30us delay anymore, because selecting a
         // left-hand row requires more than 30us for i2c.
-        matrix_row_t mask = debounce_mask(i);
-        matrix_row_t cols = (read_cols(i) & mask) | (matrix[i] & ~mask);
-        debounce_report(cols ^ matrix[i], i);
-        matrix[i] = cols;
+
+        // grab cols from left hand
+        matrix[i] = debounce_read_cols(i);
         // grab cols from right hand
-        mask = debounce_mask(i + MATRIX_ROWS_PER_SIDE);
-        cols = (read_cols(i + MATRIX_ROWS_PER_SIDE) & mask) | (matrix[i + MATRIX_ROWS_PER_SIDE] & ~mask);
-        debounce_report(cols ^ matrix[i + MATRIX_ROWS_PER_SIDE], i + MATRIX_ROWS_PER_SIDE);
-        matrix[i + MATRIX_ROWS_PER_SIDE] = cols;
+        matrix[i + MATRIX_ROWS_PER_SIDE] = debounce_read_cols(i + MATRIX_ROWS_PER_SIDE);
+
         unselect_rows();
     }
 
@@ -379,7 +386,7 @@ static void select_row(uint8_t row)
                 break;
             case 11:
                 DDRD  |= (1<<2);
-                PORTD &= ~(1<<3);
+                PORTD &= ~(1<<2);
                 break;
             case 12:
                 DDRD  |= (1<<3);
@@ -392,4 +399,3 @@ static void select_row(uint8_t row)
         }
     }
 }
-

keyboards/idobo/keymaps/default75/config.h

@@ -0,0 +1,21 @@
+/* Copyright 2017 Benjamin Kesselring
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+
+// place overrides here
+

keyboards/idobo/keymaps/default75/keymap.c

@@ -0,0 +1,67 @@
+/* Copyright 2018 Milton Griffin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Keyboard Layers
+#define _QW 0
+#define _FN 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | -      | `      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | [      | \      | ]      | Y      | U      | I      | O      | P      | '      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | CAP LK | A      | S      | D      | F      | G      | HOME   | DEL    | PG UP  | H      | J      | K      | L      | ;      | ENTER  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | END    | UP     | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | LCTRL  | LGUI   | LALT   | FN     | SPACE  | SPACE  | LEFT   | DOWN   | RIGHT  | SPACE  | SPACE  | FN     | RALT   | RGUI   | RCTRL  |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_QW] = LAYOUT_ortho_5x15( /* QWERTY */
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS, KC_GRV,  KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC, KC_BSLS, KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_QUOT, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME, KC_DEL,  KC_PGUP, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,  \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_UP,   KC_PGDN, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, MO(_FN), KC_SPC,  KC_SPC,  KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC,  KC_SPC,  MO(_FN), KC_RALT, KC_RGUI, KC_RCTL  \
+ ),
+
+/* FUNCTION
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | F1     | F2     | F3     | F4     | F5     | F6     | NUM LK | P/     | P*     | F7     | F8     | F9     | F10    | F11    | F12    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | SELECT | CALC   | MYCOMP | MAIL   | RGB HD | RGB HI | P7     | P8     | P9     | -      |        |        | PR SCR | SCR LK | PAUSE  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | PREV   | PLAY   | NEXT   | STOP   | RGB SD | RGB SI | P4     | P5     | P6     | +      |        | RESET  |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | VOL-   | MUTE   | VOL+   | APP    | RGB VD | RGB VI | P1     | P2     | P3     | PENT   |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        | RGB TG | FN     | RGB RMD| RGB MD | P0     |        | P.     | PENT   | PENT   | FN     |        |        |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+ 
+ [_FN] = LAYOUT_ortho_5x15( /* FUNCTION */
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_NLCK, KC_SLSH, KC_ASTR, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  \
+    KC_MSEL, KC_CALC, KC_MYCM, KC_MAIL, RGB_HUD, RGB_HUI, KC_P7,   KC_P8,   KC_P9,   KC_MINS, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, \
+    KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, RGB_SAD, RGB_SAI, KC_P4,   KC_P5,   KC_P6,   KC_PLUS, _______, RESET,   _______, _______, _______, \
+    KC_VOLD, KC_MUTE, KC_VOLU, KC_APP,  RGB_VAD, RGB_VAI, KC_P1,   KC_P2,   KC_P3,   KC_PENT, _______, _______, _______, _______, _______, \
+    _______, _______, RGB_TOG, MO(_FN), RGB_RMOD,RGB_MOD, KC_P0,   _______, KC_PDOT, KC_PENT, KC_PENT, MO(_FN), _______, _______, _______  \
+ ),
+};

keyboards/idobo/keymaps/default75/readme.md

@@ -0,0 +1 @@
+# The default keymap for xd75, with led controls

keyboards/idobo/keymaps/default75/rules.mk

@@ -0,0 +1,14 @@
+# Copyright 2013 Jun Wako <wakojun@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.

keyboards/planck/rev6/rules.mk

@@ -2,41 +2,8 @@
 SRC =	matrix.c
 LAYOUTS += ortho_4x12
 
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
 # Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+MCU  = STM32F303
 
 # Build Options
 #   comment out to disable the options.

keyboards/planck/rules.mk

@@ -1,39 +1,6 @@
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
 #     different sizes, comment this out, and the correct address will be loaded

keyboards/proton_c/config.h

@@ -33,7 +33,6 @@
 #define MATRIX_ROW_PINS { B9 }
 #define MATRIX_COL_PINS { B0 }
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 6
 

keyboards/rama/m60_a/rules.mk

@@ -54,7 +54,7 @@ BOOTLOADER = atmel-dfu
 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -68,7 +68,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -76,3 +76,5 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 RAW_ENABLE = yes
 DYNAMIC_KEYMAP_ENABLE = yes
 CIE1931_CURVE = yes
+
+LAYOUTS = 60_hhkb

keyboards/subatomic/config.h

@@ -24,24 +24,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6063
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    Ortholinear Keyboards
-#define PRODUCT         The Subatomic Keyboard
+#define MANUFACTURER    OLKB
+#define PRODUCT         Subatomic
 #define DESCRIPTION     A compact ortholinear keyboard
 
 /* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
 
 /* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { D2, D5, B5, B6, D3 }
-#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, C6, C5 }
+#define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2, A3, A6 }
+#define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0, B9, B8 }
 #define UNUSED_PINS
 
 // #define AUDIO_VOICES
 // #define C6_AUDIO
 
-#define BACKLIGHT_PIN B7
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 

keyboards/subatomic/keymaps/default/config.h

@@ -1,29 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 2
-
-#endif

keyboards/subatomic/keymaps/default/keymap.c

@@ -44,13 +44,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Pg Dn| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  | Right|   \  |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_QWERTY] = {
-  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
-  {KC_TRNS, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,  KC_TRNS},
-  {KC_TRNS, KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_TRNS},
-  {KC_TRNS, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  KC_TRNS},
-  {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS}
-},
+[_QWERTY] = LAYOUT_ortho_5x14(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
 
 /* Colemak
  * ,-------------------------------------------------------------------------------------------------.
@@ -65,13 +65,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Pg Dn| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  | Right|   \  |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_COLEMAK] = {
-  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
-  {KC_TRNS, KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL,  KC_TRNS},
-  {KC_TRNS, KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, KC_TRNS},
-  {KC_TRNS, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  KC_TRNS},
-  {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS}
-},
+[_COLEMAK] = LAYOUT_ortho_5x14(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL,
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
 
 /* Dvorak
  * ,-------------------------------------------------------------------------------------------------.
@@ -86,13 +86,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Pg Dn| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  | Right|   \  |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_DVORAK] = {
-  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
-  {KC_TRNS, KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL,  KC_TRNS},
-  {KC_TRNS, KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, KC_TRNS},
-  {KC_TRNS, KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT,  KC_TRNS},
-  {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS}
-},
+[_DVORAK] = LAYOUT_ortho_5x14(
+  KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS,
+  KC_TRNS, KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL,  KC_TRNS,
+  KC_TRNS, KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, KC_TRNS,
+  KC_TRNS, KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT,  KC_TRNS,
+  KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS
+),
 
 /* Lower
  * ,-------------------------------------------------------------------------------------------------.
@@ -107,13 +107,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |      |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_LOWER] = {
-  {KC_TRNS, KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, KC_TRNS},
-  {KC_TRNS, KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  KC_TRNS},
-  {KC_TRNS, KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS},
-  {KC_TRNS, _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______,KC_TRNS},
-  {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_TRNS}
-},
+[_LOWER] = LAYOUT_ortho_5x14(
+   KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
+   KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______,
+   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+  ),
 
 /* Raise
  * ,-------------------------------------------------------------------------------------------------.
@@ -128,13 +128,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |             |      | Next | Vol- | Vol+ |      | Play |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_RAISE] = {
-  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
-  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  KC_TRNS},
-  {KC_TRNS, KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, KC_TRNS},
-  {KC_TRNS, _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, KC_TRNS},
-  {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_TRNS}
-},
+[_RAISE] = LAYOUT_ortho_5x14(
+   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______,
+   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
 
 /* Adjust (Lower + Raise)
  * ,-------------------------------------------------------------------------------------------------.
@@ -149,13 +149,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |             |      |      |      |      |      |      |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_ADJUST] = {
-  {KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS},
-  {KC_TRNS, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,  KC_TRNS},
-  {KC_TRNS, _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, KC_TRNS},
-  {KC_TRNS, _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______, KC_TRNS},
-  {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_TRNS}
-}
+[_ADJUST] = LAYOUT_ortho_5x14(
+   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+   _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
+   _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______,
+   _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______,
+   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+)
 
 
 };

keyboards/subatomic/rules.mk

@@ -1,69 +1,22 @@
+# project specific files
+#SRC = matrix.c
 
-
-# MCU name
-MCU = at90usb1286
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=8192
+# Cortex version
+MCU  = STM32F303
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
+#   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-MIDI_ENABLE = yes            # MIDI controls
-AUDIO_ENABLE = yes           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
-API_SYSEX_ENABLE = no
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes  # Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes     # USB Nkey Rollover
+#CUSTOM_MATRIX = yes # Custom matrix file
+AUDIO_ENABLE = yes
+RGBLIGHT_ENABLE = no
+# SERIAL_LINK_ENABLE = yes

keyboards/subatomic/subatomic.h

@@ -3,4 +3,25 @@
 
 #include "quantum.h"
 
-#endif
+
+#define LAYOUT_ortho_5x14( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, KC_NO, KC_NO }, \
+    { k10, k11, k12, k13, k14, k15, KC_NO, KC_NO }, \
+    { k20, k21, k22, k23, k24, k25, KC_NO, KC_NO }, \
+    { k30, k31, k32, k33, k34, k35, KC_NO, KC_NO }, \
+    { k06, k07, k08, k09, k0a, k0b, k0c,   k0d }, \
+    { k16, k17, k18, k19, k1a, k1b, k1c,   k1d }, \
+    { k26, k27, k28, k29, k2a, k2b, k2c,   k2d }, \
+    { k36, k37, k38, k39, k3a, k3b, k3c,   k3d }, \
+    { k40, k41, k42, k49, k4a, k4b, k4c,   k4d }, \
+    { k46, k47, k48, k43, k44, k45, KC_NO, KC_NO }, \
+}
+
+#endif

keyboards/thevankeyboards/minivan/keymaps/talljoe-minivan/config.h

@@ -11,7 +11,7 @@
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
     K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
     K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
-) KEYMAP_ARROW( \
+) LAYOUT_arrow( \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
     K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K0D, \
@@ -24,7 +24,7 @@
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
     K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
     K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
-) KEYMAP_ARROW( \
+) LAYOUT_arrow( \
     K00, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2C, \
     K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
@@ -37,14 +37,14 @@
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
     K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
     K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
-) KEYMAP_ARROW( \
+) LAYOUT_arrow( \
     K00, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K2D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2C, \
     K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
-    K40, K49, K42,      K44, K45,      K48, K0B, K0C, K4C       \
+    K40, K41, K42,      K44, K45,      K48, K0B, K0C, K4C       \
 )
 
-#define TEMPLATE_RESET KEYMAP_ARROW( \
+#define TEMPLATE_RESET LAYOUT_arrow( \
     RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET, \
     KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
     KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \

layouts/community/60_ansi_split_bs_rshift/talljoe/config.h

@@ -34,7 +34,7 @@
    { K40, K41, K42, {}, {}, {}, {}, K47, {}, {}, K4A, K4B, K4C, K4D } \
   }
 
-#ifdef KEYBOARD_zeal60
+#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A)
 
   #define ZEAL_RGB
 

layouts/community/60_ansi_split_bs_rshift/talljoe/keymap.c

@@ -1,94 +1 @@
-#ifdef KEYBOARD_zeal60
-#include "config.h"
-#include "zeal60.h"
-#include "rgb_backlight.h"
-#include "action_layer.h"
-#include "solarized.h"
-#include "talljoe.h"
-
-// from zeal_backlight.c
-// we want to be able to set indicators for the spacebar stabs
-// but they are not represented by a row/index.
-extern backlight_config g_config;
-void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led );
-
-void set_backlight_defaults(void) {
-  uint8_t space;
-  uint8_t caps_lock;
-  map_row_column_to_led(3, 12, &caps_lock);
-  map_row_column_to_led(4, 7, &space);
-  backlight_config default_values = {
-    .use_split_backspace = USE_SPLIT_BACKSPACE,
-    .use_split_left_shift = USE_SPLIT_LEFT_SHIFT,
-    .use_split_right_shift = USE_SPLIT_RIGHT_SHIFT,
-    .use_7u_spacebar = USE_7U_SPACEBAR,
-    .use_iso_enter = USE_ISO_ENTER,
-    .disable_when_usb_suspended = 1,
-    .disable_after_timeout = 0,
-    .brightness = 255,
-    .effect = 10,
-    .color_1 = solarized.base2,
-    .color_2 = solarized.base02,
-    .caps_lock_indicator = { .index = caps_lock, .color = solarized.red },
-    .layer_1_indicator = { .index = space, .color = solarized.blue },
-    .layer_2_indicator = { .index = space, .color = solarized.yellow },
-    .layer_3_indicator = { .index = 254, .color = solarized.red },
-    .alphas_mods = {
-      RGB_BACKLIGHT_ALPHAS_MODS_ROW_0,
-      RGB_BACKLIGHT_ALPHAS_MODS_ROW_1,
-      RGB_BACKLIGHT_ALPHAS_MODS_ROW_2,
-      RGB_BACKLIGHT_ALPHAS_MODS_ROW_3,
-      RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 }
-  };
-  memcpy(&g_config, &default_values, sizeof(backlight_config));
-  backlight_config_save();
-
-#undef CUSTOM_RGB_LAYOUTS
-#ifdef CUSTOM_RGB_LAYOUTS
-  solarized_t* S = &solarized;
-  HSV alphas = S->base2;
-  HSV custom_color_map[MATRIX_ROWS][MATRIX_COLS] = CM(
-    S->red, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->red,
-    S->orange, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->orange,
-    S->green, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->green,
-    S->blue, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->blue, S->blue,
-    S->violet, S->magenta, S->yellow,              alphas,          S->yellow, S->magenta, S->violet, S->green
-  );
-  for (uint8_t row = 0; row < MATRIX_ROWS; ++row) {
-    for (uint8_t col = 0; col < MATRIX_COLS; ++col) {
-      uint8_t index;
-			map_row_column_to_led( row, col, &index );
-      set_key_color(index, custom_color_map[row][col]);
-    }
-  }
-#endif // CUSTOM_RGB_LAYOUTS
-}
-
-bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  static uint8_t last_effect;
-  switch (keycode) {
-    case DFAULTS:
-      if (IS_PRESSED(record->event)) set_backlight_defaults();
-      return false;
-    case BL_TOGG:
-      if (IS_PRESSED(record->event)) {
-        if (g_config.effect) {
-          last_effect = g_config.effect;
-          g_config.effect = 0;
-        } else {
-          g_config.effect = last_effect;
-        }
-      }
-      return false;
-    case EFFECT...EFFECT_END:
-      if (IS_PRESSED(record->event)) {
-        uint8_t effect = keycode - EFFECT;
-        g_config.effect = effect;
-        backlight_config_save();
-      }
-      return false;
-  }
-
-  return true;
-}
-#endif
+// This space intentionally left blank

layouts/community/60_hhkb/talljoe-hhkb/config.h

@@ -19,4 +19,7 @@
          K41, K42,           K45,           K48, K4C                                \
 )
 
+#ifdef RGB_BACKLIGHT_M60_A
+  #define ZEAL_RGB
+#endif
 #endif //CONFIG_USER_H

layouts/community/ergodox/algernon/NEWS.md

@@ -1,5 +1,18 @@
 <!-- -*- mode: markdown; fill-column: 8192 -*- -->
 
+## v1.12
+
+*2018-11-22*
+
+### Overall changes
+
+* Updated to work with QMK master.
+
+### Miscellaneous
+
+* The `😂` symbol can be entered with UCIS.
+* `LEAD r` now inputs `Right Alt`.
+
 ## v1.11
 
 *2017-10-01*

layouts/community/ergodox/algernon/keymap.c

@@ -13,6 +13,7 @@
 #include "eeconfig.h"
 #include "wait.h"
 #include "version.h"
+#include "print.h"
 
 /* Layers */
 
@@ -1033,6 +1034,10 @@ void matrix_scan_user(void) {
     }
 #endif
 
+    SEQ_ONE_KEY (KC_R) {
+      ang_tap(KC_RALT, 0);
+    }
+
     SEQ_ONE_KEY (KC_T) {
       time_travel = !time_travel;
     }
@@ -1126,7 +1131,8 @@ const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE
  UCIS_SYM("micro", 0x00b5),
  UCIS_SYM("tm", 0x2122),
  UCIS_SYM("child", 0x1f476),
- UCIS_SYM("family", 0x1F46A)
+ UCIS_SYM("family", 0x1F46A),
+ UCIS_SYM("joy", 0x1F602)
 );
 
 bool process_record_user (uint16_t keycode, keyrecord_t *record) {

layouts/community/ergodox/algernon/readme.md

@@ -3,7 +3,12 @@
 algernon's layout
 =======================
 
-This is an unconventional layout for the [ErgoDox EZ][ez]. For more details about the history of the layout, see my [blog posts about my ErgoDox journey][blog-ergodox].
+This is the layout I used to use on my [ErgoDox EZ][ez], while I was using [QMK][qmk]. I no longer do so, and this repository is obsolete, and not updated anymore. My current firmware is based on [Kaleidoscope][kaleidoscope], and is located [elsewhere][ergodox-sketch]. I'm keeping the repo around for historical and educational purposes.
+
+ [kaleidoscope]: https://github.com/keyboardio/Kaleidoscope
+ [ergodox-sketch]: https://git.madhouse-project.org/algernon/ErgoDox-sketch
+
+Nevertheless, this is an unconventional layout for the [ErgoDox EZ][ez]. For more details about the history of the layout, see my [blog posts about my ErgoDox journey][blog-ergodox].
 
  [ez]: https://ergodox-ez.com/
  [blog-ergodox]: https://asylum.madhouse-project.org/blog/tags/ergodox/
@@ -57,6 +62,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest
     - `LEAD d` toggles logging keypress positions to the HID console.
     - `LEAD t` toggles time travel. Figuring out the current `date` is left as an exercise to the reader.
     - `LEAD u` enters the [Unicode symbol input](#unicode-symbol-input) mode.
+    - `LEAD r` inputs `Right Alt`, which is the `Compose` key of my choice.
 
 The symbols on the front in the image above have the same color as the key that activates them, with the exception of the **Arrow** layer, which is just black on the front.
 
@@ -128,13 +134,13 @@ $ git clone https://github.com/qmk/qmk_firmware.git
 $ cd qmk_firmware
 $ git clone https://github.com/algernon/ergodox-layout.git \
             layouts/community/ergodox/algernon_master
-$ make ergodox_ez-algernon_master
+$ make ergodox_ez:algernon_master
 ```
 
 From time to time, updates may be submitted back to the QMK repository. If you are reading it there, you can build the firmware like any other firmware included with it (assuming you are in the root directory of the firmware):
 
 ```
-$ make ergodox_ez-algernon
+$ make ergodox_ez:algernon
 ```
 
 ## Using on Windows

layouts/community/ergodox/algernon/rules.mk

@@ -9,8 +9,9 @@ KEYLOGGER_ENABLE ?= yes
 UCIS_ENABLE = yes
 MOUSEKEY_ENABLE = no
 LEADER_ENABLE = yes
+RGBLIGHT_ENABLE = no
 
-AUTOLOG_ENABLE ?= no
+AUTOLOG_ENABLE ?= yes
 
 ifeq (${FORCE_NKRO},yes)
 OPT_DEFS += -DFORCE_NKRO

layouts/community/tkl_ansi/talljoe-tkl/keymap.c

@@ -1,89 +1 @@
-#ifdef KEYBOARD_zeal60
-#include "config.h"
-#include "zeal60.h"
-#include "zeal_backlight.h"
-#include "action_layer.h"
-#include "solarized.h"
-#include "talljoe.h"
-
-// from zeal_backlight.c
-// we want to be able to set indicators for the spacebar stabs
-// but they are not represented by a row/index.
-extern zeal_backlight_config g_config;
-void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led );
-
-void set_backlight_defaults(void) {
-  uint8_t space;
-  uint8_t caps_lock;
-  map_row_column_to_led(3, 12, &caps_lock);
-  map_row_column_to_led(4, 7, &space);
-  zeal_backlight_config default_values = {
-    .use_split_backspace = USE_SPLIT_BACKSPACE,
-    .use_split_left_shift = USE_SPLIT_LEFT_SHIFT,
-    .use_split_right_shift = USE_SPLIT_RIGHT_SHIFT,
-    .use_7u_spacebar = USE_7U_SPACEBAR,
-    .use_iso_enter = USE_ISO_ENTER,
-    .disable_when_usb_suspended = 1,
-    .disable_after_timeout = 0,
-    .brightness = 255,
-    .effect = 10,
-    .color_1 = solarized.base2,
-    .color_2 = solarized.base02,
-    .caps_lock_indicator = { .index = caps_lock, .color = solarized.red },
-    .layer_1_indicator = { .index = space, .color = solarized.blue },
-    .layer_2_indicator = { .index = space, .color = solarized.yellow },
-    .layer_3_indicator = { .index = 254, .color = solarized.red },
-    .alphas_mods = {
-      BACKLIGHT_ALPHAS_MODS_ROW_0,
-      BACKLIGHT_ALPHAS_MODS_ROW_1,
-      BACKLIGHT_ALPHAS_MODS_ROW_2,
-      BACKLIGHT_ALPHAS_MODS_ROW_3,
-      BACKLIGHT_ALPHAS_MODS_ROW_4 }
-  };
-  memcpy(&g_config, &default_values, sizeof(zeal_backlight_config));
-  backlight_config_save();
-
-  solarized_t* S = &solarized;
-  HSV alphas = S->base2;
-  HSV custom_color_map[MATRIX_ROWS][MATRIX_COLS] = CM(
-    S->red, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->red,
-    S->orange, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->orange,
-    S->green, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->green,
-    S->blue, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->blue, S->blue,
-    S->violet, S->magenta, S->yellow,              alphas,          S->yellow, S->magenta, S->violet, S->green
-  );
-  for (uint8_t row = 0; row < MATRIX_ROWS; ++row) {
-    for (uint8_t col = 0; col < MATRIX_COLS; ++col) {
-      backlight_set_key_color(row, col, custom_color_map[row][col]);
-    }
-  }
-}
-
-bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  static uint8_t last_effect;
-  switch (keycode) {
-    case DFAULTS:
-      if (IS_PRESSED(record->event)) set_backlight_defaults();
-      return false;
-    case BL_TOGG:
-      if (IS_PRESSED(record->event)) {
-        if (g_config.effect) {
-          last_effect = g_config.effect;
-          g_config.effect = 0;
-        } else {
-          g_config.effect = last_effect;
-        }
-      }
-      return false;
-    case EFFECT...EFFECT_END:
-      if (IS_PRESSED(record->event)) {
-        uint8_t effect = keycode - EFFECT;
-        g_config.effect = effect;
-        backlight_config_save();
-      }
-      return false;
-  }
-
-  return true;
-}
-#endif
+// This space intentionally left blank

quantum/mcu_selection.mk

@@ -0,0 +1,70 @@
+
+ifneq ($(findstring STM32, $(MCU)),)
+  ## chip/board settings
+  # - the next two should match the directories in
+  #   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+  MCU_FAMILY ?= STM32
+  MCU_SERIES ?= STM32F3xx
+
+  # Linker script to use
+  # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+  #   or <this_dir>/ld/
+  MCU_LDSCRIPT ?= STM32F303xC
+
+  # Startup code to use
+  #  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+  MCU_STARTUP ?= stm32f3xx
+
+  # Board: it should exist either in <chibios>/os/hal/boards/
+  #  or <this_dir>/boards
+  BOARD ?= GENERIC_STM32_F303XC
+
+  # Cortex version
+  MCU = cortex-m4
+
+  # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+  ARMV ?= 7
+
+  USE_FPU = yes
+
+  # Vector table for application
+  # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+  # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+  # OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+
+  # Options to pass to dfu-util when flashing
+  DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave
+endif
+
+ifeq ($(strip $(MCU)), atmega32u4)
+  # Processor frequency.
+  #     This will define a symbol, F_CPU, in all source code files equal to the
+  #     processor frequency in Hz. You can then use this symbol in your source code to
+  #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+  #     automatically to create a 32-bit value in your source code.
+  #
+  #     This will be an integer division of F_USB below, as it is sourced by
+  #     F_USB after it has run through any CPU prescalers. Note that this value
+  #     does not *change* the processor frequency - it should merely be updated to
+  #     reflect the processor speed set externally so that the code can use accurate
+  #     software delays.
+  F_CPU ?= 16000000
+
+  # LUFA specific
+  #
+  # Target architecture (see library "Board Types" documentation).
+  ARCH ?= AVR8
+
+  # Input clock frequency.
+  #     This will define a symbol, F_USB, in all source code files equal to the
+  #     input clock frequency (before any prescaling is performed) in Hz. This value may
+  #     differ from F_CPU if prescaling is used on the latter, and is required as the
+  #     raw input clock is fed directly to the PLL sections of the AVR for high speed
+  #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+  #     at the end, this will be done automatically to create a 32-bit value in your
+  #     source code.
+  #
+  #     If no clock division is performed on the input clock inside the AVR (via the
+  #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+  F_USB ?= $(F_CPU)
+endif

quantum/stm32/proton_c.mk

@@ -0,0 +1,35 @@
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F3xx
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F303xC
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f3xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = GENERIC_STM32_F303XC
+
+# Cortex version
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+
+USE_FPU = yes
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave

tmk_core/protocol/chibios/main.c

@@ -75,7 +75,7 @@ host_driver_t chibios_driver = {
 void virtser_task(void);
 #endif
 
-#ifdef RAW_HID_ENABLE
+#ifdef RAW_ENABLE
 void raw_hid_task(void);
 #endif
 
@@ -220,7 +220,7 @@ int main(void) {
 #ifdef VIRTSER_ENABLE
     virtser_task();
 #endif
-#ifdef RAW_HID_ENABLE
+#ifdef RAW_ENABLE
     raw_hid_task();
 #endif
   }

users/talljoe/config.h

@@ -5,4 +5,8 @@
 
 #define RESET_LAYER 15
 
+#define BOOTMAGIC_KEY_SALT KC_ESC
+#define BOOTMAGIC_KEY_SKIP KC_I
+#define BOOTMAGIC_KEY_EEPROM_CLEAR KC_E
+
 #endif // !USERSPACE_CONFIG_H

users/talljoe/rules.mk

@@ -5,3 +5,5 @@ EXTRAFLAGS+=-flto
 TAP_DANCE_ENABLE=yes
 CONSOLE_ENABLE=no
 COMMAND_ENABLE=no
+DYNAMIC_KEYMAP_ENABLE=no
+BOOTMAGIC_ENABLE=full

users/talljoe/talljoe.c

@@ -1,13 +1,16 @@
 #include QMK_KEYBOARD_H
 
 #include "talljoe.h"
+#ifdef ZEAL_RGB
+#include "../../../keyboards/zeal60/rgb_backlight.h"
+#endif
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_BASE] = TEMPLATE_TKL(
       KC_ESC,  KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 ,          KC_PSCR, KC_SLCK, MO_ADJ ,
       US_GRV , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , US_BSLS, KC_INS , KC_HOME, KC_PGUP,
       US_TAB , KC_Q,    KC_W,    KC_E,    KC_R,    KC_T   , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P   , KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL , KC_END , KC_PGDN,
-      CTL_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G   , KC_H,    KC_J,    KC_K,    KC_L,    US_SCLN, US_QUOT,          US_ENT ,
+      CTL_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G   , KC_H,    KC_J,    KC_K,    KC_L,    US_SCLN, KC_QUOT,          US_ENT ,
       SH_LBRC, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B   , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                   SH_RBRC,          KC_UP  ,
       KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC2, KC_SPC1, KC_SPC3,                   KC_RALT, KC_RGUI, KC_RCTL, KC_PTT , KC_LEFT, KC_DOWN, KC_RGHT),
   [_WORKMAN] = TEMPLATE(
@@ -52,7 +55,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_LCTL, KC_PTT , KC_PGDN,                   KC_SPC , KC_SPC , KC_SPC ,                   KC_RALT, KC_APP , KC_RCTL, KC_PTT ),
 #endif
   [_NAV] = TEMPLATE_NAV(
-      KC_GRV , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+      KC_GRV , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , XXXXXXX, XXXXXXX,
       US_TAB , KC_EXLM, KC_AT  , KC_HASH, KC_DLR , KC_PERC, KC_INS , KC_PGUP, KC_UP  , KC_PGDN, KC_BTN1, KC_BTN3, KC_BTN2, KC_DEL ,
       CTL_ESC, KC_LCBR, KC_RCBR, KC_LPRN, KC_RPRN, KC_AMPR, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END , US_QUOT,          TG_ADJ ,
       KC_LSFT, KC_EQL,  KC_PLUS, KC_MINS, KC_UNDS, KC_ASTR, KC_CALC, US_GRV , KC_WBAK, KC_WFWD, KC_WREF,          KC_RSFT, KC_APP ,
@@ -65,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_LCTL, KC_LGUI, KC_LALT,                   NM_SPC2, NM_SPC1, NM_SPC3,                   KC_PDOT, KC_PCMM, KC_RCTL, KC_PTT ),
  // Adjust layer is on the split-shift key; or NAV+Enter (for non-split keyboards)
   [_ADJUST] = TEMPLATE_ADJUST(
-      MO_RST , FX(1)  , FX(2)  , FX(3)  , FX(4)  , FX(5)  , FX(8)  , FX(9)  , FX(10) , FX(20) , FX(0)  , BR_DEC , BR_INC , XXXXXXX, MO_RST ,
+      MO_RST , FX(1)  , FX(2)  , FX(3)  , FX(4)  , FX(5)  , FX(6)  , FX(7)  , FX(8) ,  FX(9) ,  FX(10) , BR_DEC , BR_INC , XXXXXXX, MO_RST ,
       MO_RST , H1_INC , S1_INC , H2_INC , S2_INC , EF_INC , RGB_HUI, RGB_SAI, RGB_MOD, RGB_M_P, DFAULTS, RGB_VAD, RGB_VAI, MO_RST ,
       XXXXXXX, H1_DEC , S1_DEC , H2_DEC , S2_DEC , EF_DEC , RGB_HUD, RGB_SAD, RGB_RMOD,RGB_M_K, RGB_M_B, RGB_M_G,          TG_ADJ ,
       TG_NKRO, LY_QWER, LY_WORK, LY_NRMN, LY_DVRK, LY_CLMK, XXXXXXX, LY_MALT, XXXXXXX, XXXXXXX, KC_MAKE,          KC_CAPS, XXXXXXX,
@@ -101,7 +104,11 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
   return true;
 }
 
+#ifdef ZEAL_RGB
+extern backlight_config g_config;
+#endif
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  static uint8_t last_effect;
 
 #ifdef RGBLIGHT_ENABLE
   static uint32_t savedRgbMode;
@@ -144,6 +151,27 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       return false;
       break;
+#ifdef ZEAL_RGB
+    case BL_TOGG:
+      if (IS_PRESSED(record->event)) {
+        if (g_config.effect) {
+          last_effect = g_config.effect;
+          g_config.effect = 0;
+        } else {
+          g_config.effect = last_effect;
+        }
+      }
+      return false;
+    case EFFECT...EFFECT_END:
+      if (IS_PRESSED(record->event)) {
+        uint8_t effect = keycode - EFFECT;
+        if(effect == g_config.effect)
+          effect = 0; // Toggle effect on second press
+        g_config.effect = effect;
+        backlight_config_save();
+      }
+      return false;
+#endif
   }
   return process_record_keymap(keycode, record);
 }