wip

* Update edvorakjp layouts

* swap master hand

* update tapping_term

Makefile

@@ -536,9 +536,9 @@ endef
 	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
 	# Check if the submodules are dirty, and display a warning if they are
 ifndef SKIP_GIT
-	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --init lib/chibios; fi
-	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --init lib/chibios-contrib; fi
-	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --init lib/ugfx; fi
+	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 1 --init lib/chibios; fi
+	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --depth 1 --init lib/chibios-contrib; fi
+	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --depth 1 --init lib/ugfx; fi
 	git submodule status --recursive 2>/dev/null | \
 	while IFS= read -r x; do \
 		case "$$x" in \

common_features.mk

@@ -298,19 +298,11 @@ ifneq ($(strip $(CUSTOM_MATRIX)), yes)
 endif
 
 DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
-# Debounce Modules. If implemented in matrix.c, don't use these.
+# Debounce Modules. Set DEBOUNCE_TYPE=custom if including one manually.
 DEBOUNCE_TYPE?= sym_g
-VALID_DEBOUNCE_TYPES := sym_g eager_pk custom
-ifeq ($(filter $(DEBOUNCE_TYPE),$(VALID_DEBOUNCE_TYPES)),)
-    $(error DEBOUNCE_TYPE="$(DEBOUNCE_TYPE)" is not a valid debounce algorithm)
+ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/$(strip $(DEBOUNCE_TYPE)).c
 endif
-ifeq ($(strip $(DEBOUNCE_TYPE)), sym_g)
-    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_sym_g.c
-else ifeq ($(strip $(DEBOUNCE_TYPE)), eager_pk)
-    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_eager_pk.c
-endif
-
-
 
 ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
     OPT_DEFS += -DSPLIT_KEYBOARD

docs/_summary.md

@@ -60,6 +60,7 @@
   * [Key Lock](feature_key_lock.md)
   * [Layouts](feature_layouts.md)
   * [Leader Key](feature_leader_key.md)
+  * [LED Matrix](feature_led_matrix.md)
   * [Macros](feature_macros.md)
   * [Mouse Keys](feature_mouse_keys.md)
   * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)

docs/config_options.md

@@ -307,8 +307,8 @@ Use these to enable or disable building certain features. The more you have enab
   * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
 * `CUSTOM_MATRIX`
   * Allows replacing the standard matrix scanning routine with a custom one.
-* `CUSTOM_DEBOUNCE`
-  * Allows replacing the standard key debouncing routine with a custom one.
+* `DEBOUNCE_TYPE`
+  * Allows replacing the standard key debouncing routine with an alternative or custom one.
 * `WAIT_FOR_USB`
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`

docs/contributing.md

@@ -129,6 +129,20 @@ Documentation is one of the easiest ways to get started contributing to QMK. Fin
 
 You'll find all our documentation in the `qmk_firmware/docs` directory, or if you'd rather use a web based workflow you can click "Suggest An Edit" at the top of each page on http://docs.qmk.fm/.
 
+When providing code examples in your documentation, try to observe naming conventions used elsewhere in the docs. For example, standardizing enums as `my_layers` or `my_keycodes` for consistency:
+
+```c
+enum my_layers {
+  _FIRST_LAYER,
+  _SECOND_LAYER
+};
+
+enum my_keycodes {
+  FIRST_LAYER = SAFE_RANGE,
+  SECOND_LAYER
+};
+```
+
 ## Keymaps
 
 Most first-time QMK contributors start with their personal keymaps. We try to keep keymap standards pretty casual (keymaps, after all, reflect the personality of their creators) but we do ask that you follow these guidelines to make it easier for others to discover and learn from your keymap.

docs/custom_quantum_functions.md

@@ -321,7 +321,7 @@ uint32_t layer_state_set_user(uint32_t state) {
 ```
 ### `layer_state_set_*` Function Documentation
 
-* Keyboard/Revision: `void uint32_t layer_state_set_kb(uint32_t state)`
+* Keyboard/Revision: `uint32_t layer_state_set_kb(uint32_t state)`
 * Keymap: `uint32_t layer_state_set_user(uint32_t state)`
 
 The `state` is the bitmask of the active layers, as explained in the [Keymap Overview](keymap.md#keymap-layer-status)

docs/feature_advanced_keycodes.md

@@ -15,7 +15,7 @@ This will allow you to use `FN_CAPS` and `ALT_TAB` in your keymap, keeping it mo
 
 ## Caveats
 
-Currently, `LT()` and `MT()` are limited to the [Basic Keycode set](keycodes_basic.md), meaning you can't use keycodes like `LCTL()`, `KC_TILD`, or anything greater than `0xFF`. Modifiers specified as part of a Layer Tap or Mod Tap's keycode will be ignored.
+Currently, `LT()` and `MT()` are limited to the [Basic Keycode set](keycodes_basic.md), meaning you can't use keycodes like `LCTL()`, `KC_TILD`, or anything greater than `0xFF`. Modifiers specified as part of a Layer Tap or Mod Tap's keycode will be ignored. If you need to apply modifiers to your tapped keycode, [Tap Dance](https://github.com/qmk/qmk_firmware/blob/master/docs/feature_tap_dance.md#example-5-using-tap-dance-for-advanced-mod-tap-and-layer-tap-keys) can be used to accomplish this.
 
 Additionally, if at least one right-handed modifier is specified in a Mod Tap or Layer Tap, it will cause all modifiers specified to become right-handed, so it is not possible to mix and match the two.
 

docs/feature_debounce_type.md

@@ -2,45 +2,38 @@
 
 QMK supports multiple debounce algorithms through its debounce API.
 
-The underlying debounce algorithm is determined by which matrix.c file you are using.
-
 The logic for which debounce method called is below. It checks various defines that you have set in rules.mk
 
 ```
+DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
 DEBOUNCE_TYPE?= sym_g
-VALID_DEBOUNCE_TYPES := sym_g eager_pk custom
-ifeq ($(filter $(DEBOUNCE_TYPE),$(VALID_DEBOUNCE_TYPES)),)
-    $(error DEBOUNCE_TYPE="$(DEBOUNCE_TYPE)" is not a valid debounce algorithm)
-endif
-ifeq ($(strip $(DEBOUNCE_TYPE)), sym_g)
-    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_sym_g.c
-else ifeq ($(strip $(DEBOUNCE_TYPE)), eager_pk)
-    QUANTUM_SRC += $(DEBOUNCE_DIR)/debounce_eager_pk.c
+ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/$(strip $(DEBOUNCE_TYPE)).c
 endif
 ```
 
 # Debounce selection
 
-| DEBOUNCE_ALGO    | Description                                                 | What to do                    |
-| -------------    | ---------------------------------------------------         | ----------------------------- |
-| Not defined      | You are using the included matrix.c and debounce.c          | Nothing. Debounce_sym_g will be compiled, and used if necessary |
-| custom           | Use your own debounce.c                                     | ```SRC += debounce.c``` add your own debounce.c and implement necessary functions |
-| sym_g / eager_pk | You are using the included matrix.c and debounce.c          | Use an alternative debounce algorithm |
+| DEBOUNCE_TYPE    | Description                                          | What else is needed           |
+| -------------    | ---------------------------------------------------  | ----------------------------- |
+| Not defined      | Use the default algorithm, currently sym_g           | Nothing                       |
+| custom           | Use your own debounce.c                              | ```SRC += debounce.c``` add your own debounce.c and implement necessary functions |
+| anything_else    | Use another algorithm from quantum/debounce/*        | Nothing                       |
 
-**Regarding split keyboards**: 
+**Regarding split keyboards**:
 The debounce code is compatible with split keyboards.
 
 # Use your own debouncing code
 * Set ```DEBOUNCE_TYPE = custom ```.
 * Add ```SRC += debounce.c```
-* Add your own ```debounce.c```. Look at included ```debounce_sym_g.c```s for sample implementations.
+* Add your own ```debounce.c```. Look at current implementations in ```quantum/debounce``` for examples.
 * Debouncing occurs after every raw matrix scan.
 * Use num_rows rather than MATRIX_ROWS, so that split keyboards are supported correctly.
 
 # Changing between included debouncing methods
 You can either use your own code, by including your own debounce.c, or switch to another included one.
 Included debounce methods are:
-* debounce_eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` millseconds of no further input for that key
-* debounce_sym_g - debouncing per keyboard. On any state change, a global timer is set. When ```DEBOUNCE_DELAY``` milliseconds of no changes has occured, all input changes are pushed.
+* eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` millseconds of no further input for that key
+* sym_g - debouncing per keyboard. On any state change, a global timer is set. When ```DEBOUNCE_DELAY``` milliseconds of no changes has occured, all input changes are pushed.
 
 

docs/feature_tap_dance.md

@@ -314,3 +314,86 @@ qk_tap_dance_action_t tap_dance_actions[] = {
 And then simply use `TD(X_CTL)` anywhere in your keymap.
 
 If you want to implement this in your userspace, then you may want to check out how [DanielGGordon](https://github.com/qmk/qmk_firmware/tree/master/users/gordon) has implemented this in their userspace.
+
+### Example 5: Using tap dance for advanced mod-tap and layer-tap keys
+
+Tap dance can be used to emulate `MT()` and `LT()` behavior when the tapped code is not a basic keycode. This is useful to send tapped keycodes that normally require `Shift`, such as parentheses or curly braces—or other modified keycodes, such as `Control + X`.
+
+Below your layers and custom keycodes, add the following:
+
+```c
+// tapdance keycodes
+enum td_keycodes {
+  ALT_LP // Our example key: `LALT` when held, `(` when tapped. Add additional keycodes for each tapdance.
+};
+
+// define a type containing as many tapdance states as you need
+typedef enum {
+  SINGLE_TAP,
+  SINGLE_HOLD,
+  DOUBLE_SINGLE_TAP
+} td_state_t;
+
+// create a global instance of the tapdance state type
+static td_state_t td_state;
+
+// declare your tapdance functions:
+
+// function to determine the current tapdance state
+int cur_dance (qk_tap_dance_state_t *state);
+
+// `finished` and `reset` functions for each tapdance keycode
+void altlp_finished (qk_tap_dance_state_t *state, void *user_data);
+void altlp_reset (qk_tap_dance_state_t *state, void *user_data);
+```
+
+Below your `LAYOUT`, define each of the tapdance functions:
+
+```c
+// determine the tapdance state to return
+int cur_dance (qk_tap_dance_state_t *state) {
+  if (state->count == 1) {
+    if (state->interrupted || !state->pressed) { return SINGLE_TAP; }
+    else { return SINGLE_HOLD; }
+  }
+  if (state->count == 2) { return DOUBLE_SINGLE_TAP; }
+  else { return 3; } // any number higher than the maximum state value you return above
+}
+ 
+// handle the possible states for each tapdance keycode you define:
+
+void altlp_finished (qk_tap_dance_state_t *state, void *user_data) {
+  td_state = cur_dance(state);
+  switch (td_state) {
+    case SINGLE_TAP:
+      register_code16(KC_LPRN);
+      break;
+    case SINGLE_HOLD:
+      register_mods(MOD_BIT(KC_LALT)); // for a layer-tap key, use `layer_on(_MY_LAYER)` here
+      break;
+    case DOUBLE_SINGLE_TAP: // allow nesting of 2 parens `((` within tapping term
+      tap_code16(KC_LPRN);
+      register_code16(KC_LPRN);
+  }
+}
+
+void altlp_reset (qk_tap_dance_state_t *state, void *user_data) {
+  switch (td_state) {
+    case SINGLE_TAP:
+      unregister_code16(KC_LPRN);
+      break;
+    case SINGLE_HOLD:
+      unregister_mods(MOD_BIT(KC_LALT)); // for a layer-tap key, use `layer_off(_MY_LAYER)` here
+      break;
+    case DOUBLE_SINGLE_TAP:
+      unregister_code16(KC_LPRN);
+  }
+}
+
+// define `ACTION_TAP_DANCE_FN_ADVANCED()` for each tapdance keycode, passing in `finished` and `reset` functions
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [ALT_LP] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, altlp_finished, altlp_reset)
+};
+```
+
+Wrap each tapdance keycode in `TD()` when including it in your keymap, e.g. `TD(ALT_LP)`.

docs/feature_unicode.md

@@ -65,6 +65,8 @@ The following input modes are available:
   To enable, go to _System Preferences > Keyboard > Input Sources_, add _Unicode Hex Input_ to the list (it's under _Other_), then activate it from the input dropdown in the Menu Bar.
   By default, this mode uses the left Option key (`KC_LALT`), but this can be changed by defining [`UNICODE_OSX_KEY`](#input-key-configuration) with another keycode.
 
+  **Note:** Using the _Unicode Hex Input_ input source may disable some Option based shortcuts, such as: Option + Left Arrow (`moveWordLeftAndModifySelection`) and Option + Right Arrow  (`moveWordRightAndModifySelection`).
+
 * **`UC_LNX`**: Linux built-in IBus Unicode input. Supports code points up to `0x10FFFF` (all possible code points).
 
   Enabled by default and works almost anywhere on IBus-enabled distros. Without IBus, this mode works under GTK apps, but rarely anywhere else.
@@ -121,7 +123,7 @@ For instance, you can add these definitions to your `config.h` file:
 
 ### Additional Customization
 
-Because Unicode is such a large and variable feature, there are a number of options that you can customize to work better on your system. 
+Because Unicode is such a large and variable feature, there are a number of options that you can customize to work better on your system.
 
 #### Start and Finish input functions
 
@@ -183,7 +185,7 @@ AutoHotkey inserts the Text right of `Send, ` when this combination is pressed.
 
 ### US International
 
-If you enable the US International layout on the system, it will use punctuation to accent the characters. 
+If you enable the US International layout on the system, it will use punctuation to accent the characters.
 
 For instance, typing "`a" will result in à.
 

docs/feature_userspace.md

@@ -201,27 +201,51 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
-  case KC_MAKE:
-    if (!record->event.pressed) {
-      SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP
-#if  (defined(BOOTLOADER_DFU) || defined(BOOTLOADER_LUFA_DFU) || defined(BOOTLOADER_QMK_DFU))
-       ":dfu "
-#elif defined(BOOTLOADER_HALFKAY)
-      ":teensy "
-#elif defined(BOOTLOADER_CATERINA)
-       ":avrdude "
-#endif
-        SS_TAP(X_ENTER));
-    }
-    return false;
-    break;
+    case KC_MAKE:  // Compiles the firmware, and adds the flash command based on keyboard bootloader
+            if (!record->event.pressed) {
+            uint8_t temp_mod = get_mods();
+            uint8_t temp_osm = get_oneshot_mods();
+            clear_mods(); clear_oneshot_mods();
+            SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP);
+    #ifndef FLASH_BOOTLOADER
+            if ( (temp_mod | temp_osm) & MOD_MASK_SHIFT ) 
+    #endif
+            { // 
+                #if defined(__arm__)  // only run for ARM boards
+                    SEND_STRING(":dfu-util");
+                #elif defined(BOOTLOADER_DFU) // only run for DFU boards
+                    SEND_STRING(":dfu");
+                #elif defined(BOOTLOADER_HALFKAY) // only run for teensy boards
+                    SEND_STRING(":teensy");
+                #elif defined(BOOTLOADER_CATERINA) // only run for Pro Micros
+                    SEND_STRING(":avrdude");
+                #endif // bootloader options
+            }
+            if ( (temp_mod | temp_osm) & MOD_MASK_CTRL) { 
+                SEND_STRING(" -j8 --output-sync"); 
+            }
+            SEND_STRING(SS_TAP(X_ENTER));
+            set_mods(temp_mod);
+        }
+        break;
+
   }
   return process_record_keymap(keycode, record);
 }
 ```
 
+For boards that may not have a shift button (such as on a macro pad), we need a way to always include the bootloader option.  To do that, add the following to the `rules.mk` in your userspace folder: 
+
+```make 
+ifeq ($(strip $(FLASH_BOOTLOADER)), yes)
+    OPT_DEFS += -DFLASH_BOOTLOADER
+endif
+```
+
 This will add a new `KC_MAKE` keycode that can be used in any of your keymaps.  And this keycode will output `make <keyboard>:<keymap>`, making frequent compiling easier.  And this will work with any keyboard and any keymap as it will output the current boards info, so that you don't have to type this out every time.
 
-Additionally, this should flash the newly compiled firmware automatically, using the correct utility, based on the bootloader settings (or default to just generating the HEX file). However, it should be noted that this may not work on all systems. AVRDUDE doesn't work on WSL, namely (and will dump the HEX in the ".build" folder instead).
+Also, holding `shift` will add the appropriate flashing command (`:dfu`, `:teensy`, `:avrdude`, `:dfu-util`) for a majority of keyboards.  Holding `control` will add some commands that will speed up compiling time by processing multiple files at once. 
 
+And for the boards that lack a shift key, or that you want to always attempt the flashing part, you can add `FLASH_BOOTLOADER = yes` to the `rules.mk` of that keymap.
 
+?> This should flash the newly compiled firmware automatically, using the correct utility, based on the bootloader settings (or default to just generating the HEX file). However, it should be noted that this may not work on all systems. AVRDUDE doesn't work on WSL, namely. And this doesn't support BootloadHID or mdloader. 

docs/features.md

@@ -17,6 +17,7 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [Key Lock](feature_key_lock.md) - Lock a key in the "down" state.
 * [Layouts](feature_layouts.md) - Use one keymap with any keyboard that supports your layout.
 * [Leader Key](feature_leader_key.md) - Tap the leader key followed by a sequence to trigger custom behavior.
+* [LED Matrix](feature_led_matrix.md) - LED Matrix single color lights for per key lighting (Single Color, not RGB).
 * [Macros](feature_macros.md) - Send multiple key presses when pressing only one physical key.
 * [Mouse keys](feature_mouse_keys.md) - Control your mouse pointer from your keyboard.
 * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets hit a key rather than holding it.

docs/getting_started_build_tools.md

@@ -44,9 +44,7 @@ Fedora / Red Hat example:
     
 Arch / Manjaro example:
 
-    pacman -S base-devel gcc unzip wget zip avr-gcc avr-binutils avr-libc dfu-util arm-none-eabi-gcc arm-none-eabi-binutils arm-none-eabi-newlib git
-
-(the `dfu-programmer` package is availble on AUR only so you should download from there or use an AUR helper)
+    pacman -S base-devel gcc unzip wget zip avr-gcc avr-binutils avr-libc dfu-util arm-none-eabi-gcc arm-none-eabi-binutils arm-none-eabi-newlib git dfu-programmer dfu-util
 
 ## Nix
 

docs/getting_started_make_guide.md

@@ -143,9 +143,9 @@ As there is no standard split communication driver for ARM-based split keyboards
 
 Lets you replace the default matrix scanning routine with your own code. You will need to provide your own implementations of matrix_init() and matrix_scan().
 
-`CUSTOM_DEBOUNCE`
+`DEBOUNCE_TYPE`
 
-Lets you replace the default key debouncing routine with your own code. You will need to provide your own implementation of debounce().
+Lets you replace the default key debouncing routine with an alternative one. If `custom` you will need to provide your own implementation.
 
 ## Customizing Makefile Options on a Per-Keymap Basis
 

docs/hand_wire.md

@@ -196,7 +196,7 @@ If you're more of a visual learner, or want some additional tips and something m
 
 From here, you should have a working keyboard once you program a firmware. Before we attach the Teensy permanently to the keyboard, let's quickly get some firmware loaded onto the Teensy so we can test each keyswitch.
 
-To start out, download [the firmware](https://github.com/qmk/qmk_firmware/) - we'll be using my (Jack's) fork of TMK called QMK/Quantum. We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/).
+To start out, download [the firmware](https://github.com/qmk/qmk_firmware/) - we'll be using my (Jack's) fork of TMK called QMK/Quantum. We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/) (paid) or [Visual Studio Code](https://code.visualstudio.com) (free).
 
 The first thing we're going to do is create a new project using the script in the root directory of the firmware. In your terminal, run this command with `<project_name>` replaced by the name of your project - it'll need to be different from any other project in the `keyboards/` folder:
 

drivers/arm/i2c_master.c

@@ -65,11 +65,13 @@ uint8_t i2c_start(uint8_t address)
   return 0;
 }
 
-uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
+int8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
 {
+  //xprintf("i2c_transmit(0x%x, 0x%x, %d, 0x%x) address:0x%x\n", address, data, length, timeout, address >> 1);
   i2c_address = address;
   i2cStart(&I2C_DRIVER, &i2cconfig);
-  return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
+  int8_t result = i2cMasterTransmitTimeout(&I2C_DRIVER, i2c_address, data, length, 0, 0, MS2ST(timeout));
+  return result;
 }
 
 uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)

drivers/arm/i2c_master.h

@@ -42,7 +42,7 @@
 
 void i2c_init(void);
 uint8_t i2c_start(uint8_t address);
-uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+int8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length);
 uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);

drivers/issi/is31fl3235a.c

@@ -0,0 +1,227 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "is31fl3235a.h"
+#include "i2c_master.h"
+#include "progmem.h"
+#include "print.h"
+
+
+#define ISSI_REG_CONFIG  0x00  // FIXME: Not on 3235?
+#define ISSI_REG_CONFIG_PICTUREMODE 0x00  // FIXME: Not on 3235?
+
+//#define ISSI_REG_AUDIOSYNC 0x06  // FIXME: Not on 3235?
+
+#define ISSI_COMMANDREGISTER 0xFD  // FIXME: Not on 3235?
+#define ISSI_BANK_FUNCTIONREG 0x0B    // FIXME: Not on 3235?
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_3235a_transfer_buffer[20];
+
+// These buffers match the IS31FL3235A PWM registers 0x05-0x20.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3235A_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_rgb7seg_buffer[IS31FL3235A_COUNT][IS31FL3235A_LED_MAX];
+bool g_rgb7seg_buffer_update_required = false;
+
+/* There's probably a better way to init this... */
+#if IS31FL3235A_COUNT == 1
+    uint8_t g_3235a_control_registers[IS31FL3235A_COUNT][18] = {{0}};
+#elif IS31FL3235A_COUNT == 2
+    uint8_t g_3235a_control_registers[IS31FL3235A_COUNT][18] = {{0}, {0}};
+#elif IS31FL3235A_COUNT == 3
+    uint8_t g_3235a_control_registers[IS31FL3235A_COUNT][18] = {{0}, {0}, {0}};
+#elif IS31FL3235A_COUNT == 4
+    uint8_t g_3235a_control_registers[IS31FL3235A_COUNT][18] = {{0}, {0}, {0}, {0}};
+#endif
+bool g_rgb7seg_control_registers_update_required = false;
+
+void IS31FL3235A_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
+    g_3235a_transfer_buffer[0] = reg;
+    g_3235a_transfer_buffer[1] = data;
+    xprintf("IS31FL3235A_write_register(0x%x, 0x%x, 0x%x); g_3235a_transfer_buffer:0x%x\n", addr, reg, data, g_3235a_transfer_buffer);
+
+    #if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr, g_3235a_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
+              break;
+            }
+        }
+    #else
+        if (i2c_transmit(addr, g_3235a_transfer_buffer, 2, ISSI_TIMEOUT) == -1) {
+            // When we encounter a timeout ChibiOS says the bus must be reset as it's in an unknown state
+            xprintf("i2c transmit timeout, resetting i2c bus!\n");
+            i2c_stop(ISSI_TIMEOUT);
+            wait_ms(5);
+            i2c_start(ISSI_TIMEOUT);
+        }
+    #endif
+}
+
+void IS31FL3235A_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
+    // assumes bank is already selected
+
+    // transmit PWM registers in 9 transfers of 16 bytes
+    // g_3235a_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for (int i = 0; i < IS31FL3235A_LED_MAX; i += 16) {
+        // set the first register, e.g. 0x24, 0x34, 0x44, etc.
+        g_3235a_transfer_buffer[0] = 0x24 + i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
+        for (int j = 0; j < 16; j++) {
+            g_3235a_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_3235a_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+        if (i2c_transmit(addr << 1, g_3235a_transfer_buffer, 17, ISSI_TIMEOUT) == -1) {
+            // When we encounter a timeout ChibiOS says the bus must be reset as it's in an unknown state
+            xprintf("i2c transmit timeout, resetting i2c bus!\n");
+            i2c_stop(ISSI_TIMEOUT);
+            wait_ms(5);
+            i2c_start(ISSI_TIMEOUT);
+        }
+    #endif
+    }
+}
+
+void IS31FL3235A_init(uint8_t addr) {
+    wait_ms(2000); // Give QMK Toolbox time to attach
+    xprintf("IS31FS3235A_init(0x%x)\n", addr);
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, first enable software shutdown,
+    // then set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // Reset settings to default
+    //IS31FL3235A_write_register(addr, ISSI_REG_RESET_REG, 0);
+
+    // this delay was copied from other drivers, might not be needed
+    wait_ms(10);
+
+    // This is how the Arduino code does init...
+    uint8_t i = 0;
+
+    for (i=0x2A; i<=0x45; i++) {
+        IS31FL3235A_write_register(addr, i, 0xFF);  // Turn off all LEDs
+    }
+
+    for (i=0x05; i<=0x20; i++) {
+        IS31FL3235A_write_register(addr, i, 0x00);  // Write all PWM set 0x00
+    }
+
+    IS31FL3235A_write_register(addr, 0x25, 0x00);   //update PWM&Control registers
+    IS31FL3235A_write_register(addr, 0x4B, 0x01);   //frequency setting 22KHz
+    IS31FL3235A_write_register(addr, 0x00, 0x01);   //normal operation
+
+    // This is how the Arduino code does LED turn on
+    IS31FL3235A_write_register(addr, 0x05, 0xFF);   // set PWM
+    IS31FL3235A_write_register(addr, 0x25, 0x00);   // update PWM&Control registers
+    IS31FL3235A_write_register(addr, 0x08, 0xFF);   // set PWM
+    IS31FL3235A_write_register(addr, 0x25, 0x00);   // update PWM&Control registers
+    IS31FL3235A_write_register(addr, 0x12, 0xFF);   // set PWM
+    IS31FL3235A_write_register(addr, 0x25, 0x00);   // update PWM&Control registers
+
+    // FIXME: This is for testing, turn on OUT1 at full brightness
+    //IS31FL3235A_write_register(addr, 0x2A, 0xFF);
+    //IS31FL3235A_write_register(addr, 0x05, 0x00);
+
+    // I think this finally turns it on?
+    //IS31FL3235A_write_register(addr, 0x25, 0x00);    //update PWM&Control registers
+    //IS31FL3235A_write_register(addr, 0x4B, 0x01);  //frequency setting 22KHz
+    //IS31FL3235A_write_register(addr, 0x00, 0x01);    //normal operation
+}
+
+void IS31FL3235A_set_value(int index, uint8_t value) {
+/*
+    if (index >= 0 && index < IS31FL3235A_LED_COUNT) {
+        is31_led led = g_is31_leds[index];
+
+        // Subtract 0x24 to get the second index of g_rgb7seg_buffer
+        g_rgb7seg_buffer[led.driver][led.v - 0x24] = value;
+        g_rgb7seg_buffer_update_required = true;
+    }
+*/
+}
+
+void IS31FL3235A_set_value_all(uint8_t value) {
+    for (int i = 0; i < IS31FL3235A_LED_COUNT; i++) {
+        IS31FL3235A_set_value(i, value);
+    }
+}
+
+void IS31FL3235A_set_led_control_register(uint8_t index, bool value) {
+/*
+  is31_led led = g_is31_leds[index];
+
+  uint8_t control_register = (led.v - 0x24) / 8;
+  uint8_t bit_value = (led.v - 0x24) % 8;
+
+    if (value) {
+        g_3235a_control_registers[led.driver][control_register] |= (1 << bit_value);
+    } else {
+        g_3235a_control_registers[led.driver][control_register] &= ~(1 << bit_value);
+    }
+
+    g_rgb7seg_control_registers_update_required = true;
+*/
+}
+
+void IS31FL3235A_update_pwm_buffers(uint8_t addr, uint8_t index) {
+    //xprintf("IS31FS3235A_update_pwm_buffers(0x%x, %d)\n", addr, index);
+    if (g_rgb7seg_buffer_update_required) {
+        IS31FL3235A_write_pwm_buffer(addr, g_rgb7seg_buffer[index]);
+        g_rgb7seg_buffer_update_required = false;
+    }
+}
+
+void IS31FL3235A_update_led_control_registers(uint8_t addr, uint8_t index) {
+    if (g_rgb7seg_control_registers_update_required) {
+        for (int i=0; i<18; i++) {
+            IS31FL3235A_write_register(addr, i, g_3235a_control_registers[index][i]);
+        }
+    }
+}

drivers/issi/is31fl3235a.h

@@ -0,0 +1,141 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef IS31FL3235A_DRIVER_H
+#define IS31FL3235A_DRIVER_H
+
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b0111111 AD <-> VCC
+// 0b0111110 AD <-> SDA
+// 0b0111101 AD <-> SCL
+// 0b0111100 AD <-> GND
+#ifndef IS31FL3235A_COUNT
+    #define IS31FL3235A_COUNT 1
+#endif
+#ifndef IS31FL3235A_DRIVER_ADDR_1
+    #define IS31FL3235A_DRIVER_ADDR_1 0b0111111
+    //#define IS31FL3235A_DRIVER_ADDR_1 0x7E
+#endif
+#ifndef IS31FL3235A_DRIVER_ADDR_2
+    #define IS31FL3235A_DRIVER_ADDR_2 0b0111110
+#endif
+#ifndef IS31FL3235A_DRIVER_ADDR_3
+    #define IS31FL3235A_DRIVER_ADDR_3 0b0111101
+#endif
+#ifndef IS31FL3235A_DRIVER_ADDR_4
+    #define IS31FL3235A_DRIVER_ADDR_4 0b0111100
+#endif
+
+// This is the max number of LEDs this driver supports per IC
+#define IS31FL3235A_LED_MAX 28
+#ifndef IS31FL3235A_LED_COUNT
+    #define IS31FL3235A_LED_COUNT IS31FL3235A_LED_MAX
+#endif
+
+// Registers we will need to write to
+#define ISSI_REG_SHUTDOWN 0x00        // Control the software shutdown state of the controller
+#define ISSI_REG_GLOBAL_CONTROL 0x4A  // Write 0 for normal operation, 1 to shutdown all LEDs
+#define ISSI_REG_OUTPUT_FREQ 0x4B     // Write 0 for 3kHz PWM, 1 for 22kHz
+#define ISSI_REG_RESET_REG 0x4F       // Write 0 to reset all registers to default value
+
+
+void IS31FL3235A_init(uint8_t addr);
+void IS31FL3235A_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3235A_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
+
+void IS31FL3235A_set_value(int index, uint8_t value);
+void IS31FL3235A_set_value_all(uint8_t value);
+
+void IS31FL3235A_set_led_control_register(uint8_t index, bool value);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3235A_update_pwm_buffers(uint8_t addr, uint8_t index);
+void IS31FL3235A_update_led_control_registers(uint8_t addr, uint8_t index);
+
+// The address for each LED in the is31fl3235a's Control Register
+enum control_register {
+    CR_OUT1 = 0x2A,
+    CR_OUT2,
+    CR_OUT3,
+    CR_OUT4,
+    CR_OUT5,
+    CR_OUT6,
+    CR_OUT7,
+    CR_OUT8,
+    CR_OUT9,
+    CR_OUT10,
+    CR_OUT11,
+    CR_OUT12,
+    CR_OUT13,
+    CR_OUT14,
+    CR_OUT15,
+    CR_OUT16,
+    CR_OUT17,
+    CR_OUT18,
+    CR_OUT19,
+    CR_OUT20,
+    CR_OUT21,
+    CR_OUT22,
+    CR_OUT23,
+    CR_OUT24,
+    CR_OUT25,
+    CR_OUT26,
+    CR_OUT27,
+    CR_OUT28
+};
+
+// The address for each LED in the is31fl3235a's PWM Register
+enum pwm_register {
+    OUT1 = 0x05,
+    OUT2,
+    OUT3,
+    OUT4,
+    OUT5,
+    OUT6,
+    OUT7,
+    OUT8,
+    OUT9,
+    OUT10,
+    OUT11,
+    OUT12,
+    OUT13,
+    OUT14,
+    OUT15,
+    OUT16,
+    OUT17,
+    OUT18,
+    OUT19,
+    OUT20,
+    OUT21,
+    OUT22,
+    OUT23,
+    OUT24,
+    OUT25,
+    OUT26,
+    OUT27,
+    OUT28
+};
+
+#endif // IS31FL3235A_DRIVER_H

drivers/qwiic/qwiic.c

@@ -22,10 +22,16 @@ void qwiic_init(void) {
   #ifdef QWIIC_MICRO_OLED_ENABLE
     micro_oled_init();
   #endif
+  #ifdef QWIIC_RGB7SEG_ENABLE
+    rgb7seg_init();
+  #endif
 }
 
 void qwiic_task(void) {
   #ifdef QWIIC_JOYSTIIC_ENABLE
     joystiic_task();
   #endif
+  #ifdef QWIIC_RGB7SEG_ENABLE
+    rgb7seg_task();
+  #endif
 }

drivers/qwiic/qwiic.h

@@ -23,6 +23,9 @@
 #ifdef QWIIC_MICRO_OLED_ENABLE
   #include "micro_oled.h"
 #endif
+#ifdef QWIIC_RGB7SEG_ENABLE
+  #include "rgb7seg.h"
+#endif
 
 void qwiic_init(void);
 void qwiic_task(void);

drivers/qwiic/qwiic.mk

@@ -16,3 +16,9 @@ ifneq ($(filter MICRO_OLED, $(QWIIC_ENABLE)),)
   OPT_DEFS += -DQWIIC_MICRO_OLED_ENABLE
   SRC += micro_oled.c
 endif
+
+ifneq ($(filter RGB7SEG, $(QWIIC_ENABLE)),)
+  COMMON_VPATH += $(DRIVER_PATH)/issi
+  OPT_DEFS += -DQWIIC_RGB7SEG_ENABLE
+  SRC += rgb7seg.c is31fl3235a.c
+endif

drivers/qwiic/rgb7seg.c

@@ -0,0 +1,168 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2017 Jack Humbert
+ * Copyright 2018 Yiancar
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "quantum.h"
+#include "rgb7seg.h"
+#include "is31fl3235a.h"
+#include "progmem.h"
+#include "config.h"
+#include "eeprom.h"
+#include <string.h>
+#include <math.h>
+
+#ifndef MAX
+    #define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
+#endif
+
+#ifndef MIN
+    #define MIN(a,b) ((a) < (b)? (a): (b))
+#endif
+
+// State variables
+uint32_t g7_tick = 0;      // Global tick at 20 Hz
+bool rgb7seg_enabled = 0;  // Whether or not the display is turned on
+
+/*
+const rgb7seg_led g_rgb7seg_leds[IS31FL3235A_COUNT * 8][4] = {
+/ * Refer to IS31 manual for these locations
+ *  driver
+ *  |   R LED address
+ *  |   |      G LED address
+ *  |   |      |      B LED address
+ *  |   |      |      | * /
+    {0, OUT17, OUT16, OUT15},  // A, top middle
+    {0, OUT22, OUT21, OUT20},  // B, top right
+    {0, OUT26, OUT27, OUT28},  // C, bottom right
+    {0, OUT1,  OUT2,  OUT3},   // D, bottom center
+    {0, OUT23, OUT24, OUT25},  // DP, dot
+    {0, OUT4,  OUT5,  OUT6},   // E, bottom left
+    {0, OUT9,  OUT7,  OUT8},   // F, top left
+    {0, OUT14, OUT13, OUT12},  // G, center
+    #if IS31FL3235A_COUNT > 1
+    {1, OUT17, OUT16, OUT15},  // A, top middle
+    {1, OUT22, OUT21, OUT20},  // B, top right
+    {1, OUT26, OUT27, OUT28},  // C, bottom right
+    {1, OUT1,  OUT2,  OUT3},   // D, bottom center
+    {1, OUT23, OUT24, OUT25},  // DP, dot
+    {1, OUT4,  OUT5,  OUT6},   // E, bottom left
+    {1, OUT9,  OUT7,  OUT8},   // F, top left
+    {1, OUT14, OUT13, OUT12},  // G, center
+    #endif
+    #if IS31FL3235A_COUNT > 2
+    {2, OUT17, OUT16, OUT15},  // A, top middle
+    {2, OUT17, OUT16, OUT15},  // A, top middle
+    {2, OUT22, OUT21, OUT20},  // B, top right
+    {2, OUT26, OUT27, OUT28},  // C, bottom right
+    {2, OUT1,  OUT2,  OUT3},   // D, bottom center
+    {2, OUT23, OUT24, OUT25},  // DP, dot
+    {2, OUT4,  OUT5,  OUT6},   // E, bottom left
+    {2, OUT9,  OUT7,  OUT8},   // F, top left
+    {2, OUT14, OUT13, OUT12},  // G, center
+    #endif
+    #if IS31FL3235A_COUNT > 3
+    {3, OUT17, OUT16, OUT15},  // A, top middle
+    {3, OUT22, OUT21, OUT20},  // B, top right
+    {3, OUT26, OUT27, OUT28},  // C, bottom right
+    {3, OUT1,  OUT2,  OUT3},   // D, bottom center
+    {3, OUT23, OUT24, OUT25},  // DP, dot
+    {3, OUT4,  OUT5,  OUT6},   // E, bottom left
+    {3, OUT9,  OUT7,  OUT8},   // F, top left
+    {3, OUT14, OUT13, OUT12},  // G, center
+    {3, OUT22, OUT21, OUT20},  // B, top right
+    #endif
+};
+*/
+
+// API
+void rgb7seg_flush(void) {
+    IS31FL3235A_update_pwm_buffers(IS31FL3235A_DRIVER_ADDR_1, 0);
+    #if IS31FL3235A_COUNT > 1
+        IS31FL3235A_update_pwm_buffers(IS31FL3235A_DRIVER_ADDR_2, 1);
+    #endif
+    #if IS31FL3235A_COUNT > 2
+        IS31FL3235A_update_pwm_buffers(IS31FL3235A_DRIVER_ADDR_3, 2);
+    #endif
+    #if IS31FL3235A_COUNT > 3
+        IS31FL3235A_update_pwm_buffers(IS31FL3235A_DRIVER_ADDR_4, 3);
+    #endif
+}
+
+void rgb7seg_set_index_value(int index, uint8_t value) {
+    IS31FL3235A_set_value(index, value);
+}
+
+void rgb7seg_set_index_value_all(uint8_t value) {
+    IS31FL3235A_set_value_all(value);
+}
+
+// All LEDs off
+void rgb7seg_off(void) {
+    rgb7seg_set_index_value_all(0);
+}
+
+void rgb7seg_task(void) {
+    g7_tick++;
+
+    // Do something here?
+
+    // Tell the LED driver to update its state
+    rgb7seg_flush();
+}
+
+void rgb7seg_init(void) {
+    IS31FL3235A_init(IS31FL3235A_DRIVER_ADDR_1);
+    #if IS31FL3235A_COUNT > 1
+        IS31FL3235A_init(IS31FL3235A_DRIVER_ADDR_2);
+    #endif
+    #if IS31FL3235A_COUNT > 2
+        IS31FL3235A_init(IS31FL3235A_DRIVER_ADDR_3);
+    #endif
+    #if IS31FL3235A_COUNT > 3
+        IS31FL3235A_init(IS31FL3235A_DRIVER_ADDR_4);
+    #endif
+
+    // Wait half a second for the driver to finish initializing
+    wait_ms(500);
+}
+
+uint32_t rgb7seg_get_tick(void) {
+    return g7_tick;
+}
+
+void rgb7seg_toggle(void) {
+    rgb7seg_enabled ^= 1;
+}
+
+void rgb7seg_enable(void) {
+    rgb7seg_enabled = 1;
+}
+
+void rgb7seg_disable(void) {
+    rgb7seg_enabled = 0;
+}
+
+void rgb7seg_increase_val(void) {
+    // FIXME: Implement
+}
+
+void rgb7seg_decrease_val(void) {
+    // FIXME: Implement
+}

drivers/qwiic/rgb7seg.h

@@ -0,0 +1,60 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2017 Jack Humbert
+ * Copyright 2018 Yiancar
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef LED_MATRIX_H
+#define LED_MATRIX_H
+
+#include "is31fl3235a.h"
+
+#ifndef BACKLIGHT_ENABLE
+  #error You must define BACKLIGHT_ENABLE with LED_MATRIX_ENABLE
+#endif
+
+
+void rgb7seg_task(void);
+void rgb7seg_init(void);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void rgb7seg_flush(void);
+
+uint32_t rgb7seg_get_tick(void);
+
+void rgb7seg_off(void);
+void rgb7seg_set_index_value(int index, uint8_t value);
+void rgb7seg_set_index_value_all(uint8_t value);
+
+void rgb7seg_toggle(void);
+void rgb7seg_enable(void);
+void rgb7seg_disable(void);
+void rgb7seg_increase_val(void);
+void rgb7seg_decrease_val(void);
+
+typedef struct rgb7seg_led {
+  uint8_t driver;
+  uint8_t r;
+  uint8_t g;
+  uint8_t b;
+} __attribute__((packed)) rgb7seg_led;
+
+extern const rgb7seg_led g_rgb7seg_leds[IS31FL3235A_COUNT * 8];
+
+#endif

keyboards/40percentclub/foobar/info.json

@@ -2,10 +2,12 @@
     "keyboard_name": "foobar",
     "url": "",
     "maintainer": "qmk",
-    "width": 6,
-    "height": 2,
+    "width": 10,
+    "height": 3,
     "layouts": {
         "LAYOUT_macro": {
+            "width": 5,
+            "height": 3,
             "key_count": 15,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0},

keyboards/40percentclub/half_n_half/half_n_half.h

@@ -16,6 +16,7 @@
 #pragma once
 
 #include "quantum.h"
+#define ___ KC_NO
 
 /* This a shortcut to help you visually see your layout.
  *
@@ -26,18 +27,18 @@
  * represents the switch matrix.
  */
 #define LAYOUT( \
-    K00, K01, K02, K03, K04, K05, K06,     K50, K51, K52, K53, K54, K55, K56, \
-    K10, K11, K12, K13, K14, K15, K16,     K60, K61, K62, K63, K64, K65, K66, \
-    K20, K21, K22, K23, K24, K25, K26,     K70, K71, K72, K73, K74, K75, K76, \
-                        K34,                         K82 \
+    L00, L01, L02, L03, L04, L05, L06,     R00, R01, R02, R03, R04, R05, R06, \
+    L10, L11, L12, L13, L14, L15, L16,     R10, R11, R12, R13, R14, R15, R16, \
+    L20, L21, L22, L23, L24, L25, L26,     R20, R21, R22, R23, R24, R25, R26, \
+                        L34,                         R32 \
 ) { \
-    { K00,   K01,   K02,   K03,   K04, K05,   K06   }, \
-    { K10,   K11,   K12,   K13,   K14, K15,   K16   }, \
-    { K20,   K21,   K22,   K23,   K24, K25,   K26   }, \
-    { KC_NO, KC_NO, KC_NO, KC_NO, K34, KC_NO, KC_NO }, \
+    { L00, L01, L02, L03, L04, L05, L06 }, \
+    { L10, L11, L12, L13, L14, L15, L16 }, \
+    { L20, L21, L22, L23, L24, L25, L26 }, \
+    { ___, ___, ___, ___, L34, ___, ___ }, \
 \
-    { K56,   K55,   K54,   K53,   K52, K51,   K50   }, \
-    { K66,   K65,   K64,   K63,   K62, K61,   K60   }, \
-    { K76,   K75,   K74,   K73,   K72, K71,   K70   }, \
-    { KC_NO, KC_NO, KC_NO, KC_NO, K82, KC_NO, KC_NO }  \
+    { R06, R05, R04, R03, R02, R01, R00 }, \
+    { R16, R15, R14, R13, R12, R11, R10 }, \
+    { R26, R25, R24, R23, R22, R21, R20 }, \
+    { ___, ___, ___, ___, R32, ___, ___ }  \
 }

keyboards/40percentclub/half_n_half/info.json

@@ -0,0 +1,62 @@
+{
+  "keyboard_name": "half_n_half",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 14,
+  "height": 4,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 44,
+      "layout": [
+          {"label":"L00", "x":0, "y":0},
+          {"label":"L01", "x":1, "y":0},
+          {"label":"L02", "x":2, "y":0},
+          {"label":"L03", "x":3, "y":0},
+          {"label":"L04", "x":4, "y":0},
+          {"label":"L05", "x":5, "y":0},
+          {"label":"L06", "x":6, "y":0},
+          {"label":"R00", "x":7, "y":0},
+          {"label":"R01", "x":8, "y":0},
+          {"label":"R02", "x":9, "y":0},
+          {"label":"R03", "x":10, "y":0},
+          {"label":"R04", "x":11, "y":0},
+          {"label":"R05", "x":12, "y":0},
+          {"label":"R06", "x":13, "y":0},
+
+          {"label":"L10", "x":0, "y":1},
+          {"label":"L11", "x":1, "y":1},
+          {"label":"L12", "x":2, "y":1},
+          {"label":"L13", "x":3, "y":1},
+          {"label":"L14", "x":4, "y":1},
+          {"label":"L15", "x":5, "y":1},
+          {"label":"L16", "x":6, "y":1},
+          {"label":"R10", "x":7, "y":1},
+          {"label":"R11", "x":8, "y":1},
+          {"label":"R12", "x":9, "y":1},
+          {"label":"R13", "x":10, "y":1},
+          {"label":"R14", "x":11, "y":1},
+          {"label":"R15", "x":12, "y":1},
+          {"label":"R16", "x":13, "y":1},
+
+          {"label":"L20", "x":0, "y":2},
+          {"label":"L21", "x":1, "y":2},
+          {"label":"L22", "x":2, "y":2},
+          {"label":"L23", "x":3, "y":2},
+          {"label":"L24", "x":4, "y":2},
+          {"label":"L25", "x":5, "y":2},
+          {"label":"L26", "x":6, "y":2},
+          {"label":"R20", "x":7, "y":2},
+          {"label":"R21", "x":8, "y":2},
+          {"label":"R22", "x":9, "y":2},
+          {"label":"R23", "x":10, "y":2},
+          {"label":"R24", "x":11, "y":2},
+          {"label":"R25", "x":12, "y":2},
+          {"label":"R26", "x":13, "y":2},
+ 
+          {"label":"L34", "x":4, "y":3, "w":2},
+          {"label":"R32", "x":8, "y":3, "w":2}
+      ]
+    }
+  }
+}
+  

keyboards/40percentclub/mf68/config.h

@@ -52,6 +52,28 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 

keyboards/40percentclub/mf68/keymaps/mf68_ble/config.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* Overrides for Feather 32u4 Bluefruit */
+
+/* USB Device descriptor parameter */
+#undef DESCRIPTION
+#define DESCRIPTION     Magicforce 68 BLE
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+#undef UNUSED_PINS
+#define MATRIX_ROW_PINS { D1, D0, C6, D7, B5, B6, B7, D6 }
+#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, D2, D3 }
+#define UNUSED_PINS {B5}

keyboards/40percentclub/mf68/keymaps/mf68_ble/readme.md

@@ -1,6 +1,6 @@
 # mf68_ble
 
-![mf68_ble](https://3.bp.blogspot.com/-0YCA3Hx2Rq0/WD3U3GWhyvI/AAAAAAAB_Uo/RWTeyCPblGcxDrDwT9WL9ck2ZRuR26DgACLcB/s640/IMG_20161129_063741.jpg)
+![mf68_ble](https://i.imgur.com/zuTyy7k.jpg)
 ===
 
 Magicforce 68 with [replacement PCB](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/mf68) designed by [di0ib](https://github.com/di0ib).
@@ -24,6 +24,6 @@ Below is how you wire the Feather to PCB
 
 Make example for this keyboard (after setting up your build environment):  
 
-    make 40percentclub/mf68_ble:default
+    make 40percentclub/mf68:mf68_ble
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/mf68/keymaps/mf68_ble/rules.mk

@@ -0,0 +1,66 @@
+# Overrides for Feather 32u4 Bluefruit
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 8000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BLUETOOTH = AdafruitBLE
+BACKLIGHT_ENABLE = no

keyboards/40percentclub/mf68/rules.mk

@@ -63,13 +63,14 @@ BOOTLOADER = caterina
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI controls
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/40percentclub/mf68_ble/info.json

@@ -1,12 +0,0 @@
-{
-  "keyboard_name": "MF68 BLE",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 17.25,
-  "height": 5,
-  "layouts": {
-      "LAYOUT_68_ansi": {
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"x":15.25, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}]
-      }
-  }
-}

keyboards/40percentclub/mf68_ble/mf68_ble.c

@@ -1,8 +0,0 @@
-#include "mf68_ble.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}

keyboards/40percentclub/mf68_ble/mf68_ble.h

@@ -1,37 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT_68_ansi( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14,     K15, K16, \
-    K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32,     K33, K34, \
-    K35,  K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47,     K48, \
-    K50,   K51, K52, K53, K54, K55, K56, K57, K58, K60, K61,    K62,          K63, \
-    K64,  K65,  K66,                 K67,              K68,  K70,  K71,  K72, K73, K74 \
-) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \
-    { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \
-    { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \
-    { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \
-    { K60, K61, K62, K63, K64, K65, K66, K67, K68 }, \
-    { K70, K71, K72, K73, K74 } \
-}
-
-#define LAYOUT_kc( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14,     K15, K16, \
-    K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32,     K33, K34, \
-    K35,  K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47,     K48, \
-    K50,   K51, K52, K53, K54, K55, K56, K57, K58, K60, K61,    K62,          K63, \
-    K64,  K65,  K66,                 K67,              K68,  K70,  K71,  K72, K73, K74 \
-) LAYOUT_68_ansi( \
-    KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, \
-    KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, \
-    KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, \
-    KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, \
-    KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, \
-    KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, KC_##K58, \
-    KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, KC_##K68, \
-    KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74 \
-)

keyboards/atreus/keymaps/yttyx/README.md

@@ -1,77 +1,103 @@
 # Overview
 
-A Balance 12 layout for the Atreus keyboard.
+This layout is based on Balance Twelve (mirror variant) by Sasha Viminitz. Please see [this page](https://mathematicalmulticore.wordpress.com/the-keyboard-layout-project/) 
+for more information. It's designed for left-handers who use their right hand for the mouse.
 
-Balance 12 was created by Sasha Viminitz. Please see [this page](https://mathematicalmulticore.wordpress.com/the-keyboard-layout-project/)
-for some background on the design of the layout.
+## To build
 
-* The variant used here is a mirror of the original for left-handers
-* The central column of punctuation keys has been moved elsewhere
-* Home positions for the left and right forefingers are *T* and *A* respectively
+```
+sudo make atreus:yttyx
+```
 
-## To build/flash
+## To flash (example)
 
-> make atreus:yttyx:avrdude
+```
+sudo avrdude -p atmega32u4 -c avr109 -U flash:w:atreus_yttyx.hex -P /dev/ttyACM0
+```
 
 ## Layers
 
 ### Base:
 
-      .----------------------------------.         .------------------------------.
-      | P    | L    | C    | D   | W     |         | U    | O   | Y   | K   | Q   |
-      +------+------+------+-----+-------|         |------+-----+-----+-----+-----|
-      | N    | R    | S    | T   | M     |         | A    | E   | I   | H   | V   |
-      +------+------+------+-----+-------|         |------+-----+-----+-----+-----|
-      | Z    | J    | F    | G   | B     |         | ,    | .   | ;   | X   | -   |
-      +------+------+------+-----+-------+---------+------+-----+-----+-----+-----|
-      | Shft | Ctl  | Alt  | BS  | Space | L1 | R1 | Shft | R2  | Win | Ctl | Alt |
-      '---------------------------------------------------------------------------'
+    .--------.-------.-------.-------.--------.                           .-------.-------.-------.-------.------.
+    | P      | L     | C     | D     | W      |                           | U     | O     | Y     | K     | Q    |
+    |--------+-------+-------+-------+--------|                           |-------+-------+-------+-------+------|
+    | N      | R     | S     | T     | M      |                           | A     | E     | I     | H     | V    |
+    |--------+-------+-------+-------+--------|                           |-------+-------+-------+-------+------|
+    | Z Sft  | J Ctl | F Alt | G     | B      |                           | ,     | . Alt | ; Ctl | X Sft | Sup  |
+    '--------'-------'-------+-------+--------+-----.               .-----+-------+-------+-------'-------'------'
+                             | BS P1 | Spc P2 | P3  |               |     | Sft   |       |
+                             '-------'--------'-----'               '-----'-------'-------'
 
-### L1:
+### P1: Punctuation (1)
 
-      .---------------------------------.         .--------------------------------.
-      | 1    | 2    | 3    | 4  | 5     |         | 6    | 7  | 8   | 9    | 0     |
-      |------+------+------+----+-------|         |------+----+-----+------+-------|
-      | Tab  | ?    | =    | -  | _     |         | '    | "  | +   | *    | Enter |
-      |------+------+------+----+-------|         |------+----+-----+------+-------|
-      | Esc  | !    | &    |    |       |         | ,    | .  | ;   |      | -     |
-      |------+------+------+----+-------+---------+------+----+-----+------+-------|
-      | Shft | Ctrl | Alt  | Bk | Space | L1 | R1 | Shft | R2 | Sup | Ctrl | Alt   |
-      '----------------------------------------------------------------------------'
 
-### R1:
+    .--------.-------.-------.-------.-------.                              .------.-------.-------.-------.------.
+    | Esc    |       |       |       | RS    |                              | |    | /     | ^     | £     |  ~   |
+    |--------+-------+-------+-------+-------|                              |------+-------+-------+-------+------|
+    | Tab    |       |       |       |       |                              | &    | \     | `     | $     | Ent  |
+    |--------+-------+-------+-------+-------|                              |------+-------+-------+-------+------|
+    | Sft    | Ctl   | Alt   | Del   |       |                              | %    | Alt   | Ctl   | Sft   | Sup  |
+    '--------'-------'-------+-------+-------+-----.                  .-----+------+-------+-------'-------'------'
+                             | P1    |       |     |                  |     | Sft  |       |
+                             '-------'-------'-----'                  '-----'------'-------'
 
-      .---------------------------------.         .-------------------------------.
-      | <    | >    | {   | }   | @     |         | $    | £  |     |      | R3   |
-      +------+------+-----+-----|-------|         |------+----+-----+------+------|
-      | [    | ]    | (   | )   | #     |         | '    | "  | ~   | `    | Caps |
-      |------+------+-----+-----+-------|         |------+----+-----+------+------|
-      | /    | \    | ^   | |   | %     |         | ,    | .  | ;   |      | PScn |
-      |------+------+-----+-----+-------+---------+------+----+-----+------+------|
-      | Shft | Ctrl | Alt | Del | Space | L1 | R1 | Shft | R2 | Sup | Ctrl | Alt  |
-      '---------------------------------------------------------------------------'
+### P2: Punctuation (2)
 
-### R2:
+    .-------.-------.-------.-------.-------.                               .-------.-------.-------.-------.------.
+    | Esc   |       | NC    | FV    |       |                               | (     | )     | "     | ?     |      |
+    |-------+-------+-------+-------+-------|                               |-------+-------+-------+-------+------|
+    | Tab   | Ctl-X | Ctl-C | Ctl-V | Ctl-Z |                               | {     | }     | '     | !     | Ent  |
+    |-------+-------+-------+-------+-------|                               |-------+-------+-------+-------+------|
+    | Sft   | Ctl   | Alt   | Del   | Ent   |                               | #     | Alt   | Ctl   | Sft   | Sup  |
+    '-------'-------'-------+-------+-------+-----.                   .-----+-------+-------+-------'-------'------'
+                            | BS    | P2    |     |                   |     | Sft   |       |
+                            '-------'-------'-----'                   '-----'-------'-------'
 
-      .-----------------------------------.         .--------------------.-----------------.
-      | F12  | F11  | F10  | F9   | Copy  |         | Home | Up   | End  | PgUp | Insert   |
-      |------+------+------+------+-------|         |------+------+------+------+----------|
-      | F8   | F7   | F6   | F5   | Paste |         | Left | Down | Right| PgDn | Enter    |
-      |------+------+------+------+-------|         |------+------+------+------+----------|
-      | F4   | F3   | F2   | F1   | Cut   |         | ^Tab |      | Tab  |      |          |
-      |------+------+------+------+-------+---------+------+------+------+------+----------|
-      | Shft | Ctrl | Alt  | Del  | Undo  | L1 | R1 | Shft | R2   | Sup  | Ctrl | WinRight |
-      '------------------------------------------------------------------------------------'
+### P3: Punctuation (3)
 
-### R3:
+    .-------.-------.-------.-------.-------.                             .------.-------.-------.-------.------.
+    | Esc   |       | Break | Pscr  | ScLk  |                             | <    | >     | +     | _     | =    |
+    |-------+-------+-------+-------+-------|                             |------+-------+-------+-------+------|
+    | Tab   |       |       | Caps  |       |                             | [    | ]     | *     | -     | Ent  |
+    |-------+-------+-------+-------+-------|                             |------+-------+-------+-------+------|
+    | Sft   | Ctl   | Alt   | Del   |       |                             | @    | Alt   | Ctl   | Sft   | Sup  |
+    '-------'-------'-------+-------+-------+-----.                 .-----+------+-------+-------'-------'------'
+                            | BS    |       | P3  |                 |     | Sft  |       |
+                            '-------'-------'-----'                 '-----'------'-------'
 
-      .----------------------------.         .------------------------.
-      | RESET |    |     |    |    |         |    |    |    |    | R3 |
-      |-------+----+-----+----+----|         |----+----+----+----+----|
-      |       |    |     |    |    |         |    |    |    |    |    |
-      |-------+----+-----+----+----|         |----+----+----+----+----|
-      |       |    |     |    |    |         |    |    |    |    |    |
-      |-------+----+-----+----+----+---------+----+----+----+----+----|
-      |       |    |     |    |    |    |    |    |    |    |    |    |
-      '---------------------------------------------------------------'
+### Numerals / Cursor control
 
+    .-------.-------.-------.------.-------.                              .------.-------.-------.------.------.
+    | 1     | 2     | 3     | 4    | 5     |                              | Home | Up    | End   | PgUp |      |
+    |-------+-------+-------+------+-------|                              |------+-------+-------+------+------|
+    | 6     | 7     | 8     | 9    | 0     |                              | Left | Down  | Right | PgDn |      |
+    |-------+-------+-------+------+-------|                              |------+-------+-------+------+------|
+    | Sft   | Ctl   | Alt   | Del  | .     |                              | Ins  | Alt   | Ctl   | Sft  | Sup  |
+    '-------'-------'-------+------+-------+-----.                  .-----+------+-------+-------'------'------'
+                            | BS   | BA    |     |                  |     | Sft  |       |
+                            '------'-------'-----'                  '-----'------'-------'
+
+### FV: Function keys / Cursor control (Vim)
+
+    .-------.------.-------.-----.-------.                                .------.-------.-----.-------.------.
+    | F1    | F2   | F3    | F4  | F5    |                                | 0    | K     | $   | Ctl-B |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    | F6    | F7   | F8    | F9  | F10   |                                | H    | J     | L   | Ctl-F |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    | Sft   | Ctl  | Alt   | F11 | F12   |                                |      | Alt   | Ctl | Sft   | Sup  |
+    '-------'------'-------+-----+-------+-----.                    .-----+------+-------+-----'-------'------'
+                           | BS  | BA    |     |                    |     | Sft  |       |
+                           '-----'-------'-----'                    '-----'------'-------'
+
+### RS: Reset
+
+    .-------.------.-------.-----.-------.                                .------.-------.-----.-------.------.
+    | RESET |      |       |     |       |                                |      |       |     |       |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    |       |      |       |     |       |                                |      |       |     |       |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    |       |      |       |     |       |                                |      |       |     |       |      |
+    '-------'------'-------+-----+-------+-----.                    .-----+------+-------+-----'-------'------'
+                           |     | BA    |     |                    |     |      |       |
+                           '-----'-------'-----'                    '-----'------'-------'

keyboards/atreus/keymaps/yttyx/config.h

@@ -1,12 +1,4 @@
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#define ONESHOT_TIMEOUT       500   // Time (in ms) before the one shot key is released
-
-// Disable some options to reduce firmware size
-#define NO_PRINT
-#define NO_ACTION_TAPPING
+#pragma once
+#define NO_ACTION_ONESHOT
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-
-#endif

keyboards/atreus/keymaps/yttyx/keymap.c

@@ -2,115 +2,158 @@
 #include QMK_KEYBOARD_H
 
 enum layers {
-  BASE,         // Balance Twelve
-  L1,           // (momentary)
-  R1,           // (momentary)
-  R2,           // (momentary)
-  R3            // (momentary)
+  BA,           // Base (Balance Twelve mirror variant)
+  P1,           // Punctuation (1)
+  P2,           // Punctuation (2)
+  P3,           // Punctuation (2)
+  NC,           // Numerals / Cursor control
+  FV,           // Function keys / Cursor control (Vim)
+  RS            // Reset
 };
 
-// Aliases from replicaJunction's atreus layout
-#define KCX_LST   LSFT(KC_TAB)
-#define KX_COPY   LCTL(KC_C)
-#define KX_CUT    LCTL(KC_X)
-#define KX_PAST   LCTL(KC_V)
-#define KX_UNDO   LCTL(KC_Z)
+// Abbreviations - base
+#define KX_P1_BSPC      LT(P1, KC_BSPC)
+#define KX_P2_SPC       LT(P2, KC_SPC)
 
-#define KX_AT     LSFT(KC_QUOT)
-#define KX_PIPE   LSFT(KC_NUBS)
-#define KX_WINR   LSFT(LGUI(KC_RGHT))   // Move window to next monitor (Windows)
+#define KX_SFT_Z        MT(MOD_LSFT, KC_Z)
+#define KX_CTL_J        MT(MOD_LCTL, KC_J)
+#define KX_ALT_F        MT(MOD_LALT, KC_F)
 
+#define KX_ALT_DOT      MT(MOD_LALT, KC_DOT)
+#define KX_CTL_SCLN     MT(MOD_LCTL, KC_SCLN)
+#define KX_SFT_X        MT(MOD_LSFT, KC_X)
 
+#define KX_AT           LSFT(KC_QUOT)
+#define KX_DQUOT        LSFT(KC_2)
+#define KX_PIPE         LSFT(KC_NUBS)
+#define KX_TILDA        LSFT(KC_NUHS)
+
+ 
 const uint16_t PROGMEM keymaps[][ MATRIX_ROWS ][ MATRIX_COLS ] = {
-
- /* Balance Twelve mirror variant (left-handed)
-  .--------------------------------.         .------------------------------.
-  | P    | L    | C   | D  | W     |         | U    | O  | Y   | K    | Q   |
-  +------+------+-----+----+-------|         |------+----+-----+------+-----|
-  | N    | R    | S   | T  | M     |         | A    | E  | I   | H    | V   |
-  +------+------+-----+----+-------|         |------+----+-----+------+-----|
-  | Z    | J    | F   | G  | B     |         | ,    | .  | ;   | X    | -   |
-  +------+------+-----+----+-------+---------+------+----+-----+------+-----|
-  | Shft | Ctrl | Alt | Bk | Space | L1 | R1 | Shft | R2 | Win | Ctrl | Alt |
-  '-------------------------------------------------------------------------'
-  */
-  [BASE] = LAYOUT(
-    KC_P,    KC_L,    KC_C,    KC_D,    KC_W,                   KC_U,          KC_O,   KC_Y,    KC_K,    KC_Q,
-    KC_N,    KC_R,    KC_S,    KC_T,    KC_M,                   KC_A,          KC_E,   KC_I,    KC_H,    KC_V,
-    KC_Z,    KC_J,    KC_F,    KC_G,    KC_B,                   KC_COMM,       KC_DOT, KC_SCLN, KC_X,    KC_MINS,
-    KC_LSFT, KC_LCTL, KC_LALT, KC_BSPC, KC_SPC, MO(L1), MO(R1), OSM(MOD_LSFT), MO(R2), KC_LWIN, KC_RCTL, KC_RALT
+  /*
+    .--------.-------.-------.-------.--------.                           .-------.-------.-------.-------.------.
+    | P      | L     | C     | D     | W      |                           | U     | O     | Y     | K     | Q    |
+    |--------+-------+-------+-------+--------|                           |-------+-------+-------+-------+------|
+    | N      | R     | S     | T     | M      |                           | A     | E     | I     | H     | V    |
+    |--------+-------+-------+-------+--------|                           |-------+-------+-------+-------+------|
+    | Z Sft  | J Ctl | F Alt | G     | B      |                           | ,     | . Alt | ; Ctl | X Sft | Sup  |
+    '--------'-------'-------+-------+--------+-----.               .-----+-------+-------+-------'-------'------'
+                             | BS P1 | Spc P2 | P3  |               |     | Sft   |       |
+                             '-------'--------'-----'               '-----'-------'-------'
+  */                                                               
+  [BA] = LAYOUT(                                                   
+    KC_P,     KC_L,     KC_C,     KC_D,       KC_W,                          KC_U,    KC_O,       KC_Y,        KC_K,     KC_Q,
+    KC_N,     KC_R,     KC_S,     KC_T,       KC_M,                          KC_A,    KC_E,       KC_I,        KC_H,     KC_V,
+    KX_SFT_Z, KX_CTL_J, KX_ALT_F, KC_G,       KC_B,                          KC_COMM, KX_ALT_DOT, KX_CTL_SCLN, KX_SFT_X, KC_LGUI,
+    XXXXXXX,  XXXXXXX,  XXXXXXX,  KX_P1_BSPC, KX_P2_SPC, MO(P3),    XXXXXXX, KC_RSFT, XXXXXXX,    XXXXXXX,     XXXXXXX,  XXXXXXX
   ),
 
- /* L1
-  .---------------------------------.         .--------------------------------.
-  | 1    | 2    | 3    | 4  | 5     |         | 6    | 7  | 8   | 9    | 0     |
-  |------+------+------+----+-------|         |------+----+-----+------+-------|
-  | Tab  | ?    | =    | -  | _     |         | '    | "  | +   | *    | Enter |
-  |------+------+------+----+-------|         |------+----+-----+------+-------|
-  | Esc  | !    | &    |    |       |         | ,    | .  | ;   |      | -     |
-  |------+------+------+----+-------+---------+------+----+-----+------+-------|
-  | Shft | Ctrl | Alt  | Bk | Space | L1 | R1 | Shft | R2 | Sup | Ctrl | Alt   |
-  '----------------------------------------------------------------------------'
+  /* P1: Punctuation (1)
+    .--------.-------.-------.-------.-------.                              .------.-------.-------.-------.------.
+    | Esc    |       |       |       | RS    |                              | |    | /     | ^     | £     |  ~   |
+    |--------+-------+-------+-------+-------|                              |------+-------+-------+-------+------|
+    | Tab    |       |       |       |       |                              | &    | \     | `     | $     | Ent  |
+    |--------+-------+-------+-------+-------|                              |------+-------+-------+-------+------|
+    | Sft    | Ctl   | Alt   | Del   |       |                              | %    | Alt   | Ctl   | Sft   | Sup  |
+    '--------'-------'-------+-------+-------+-----.                  .-----+------+-------+-------'-------'------'
+                             | P1    |       |     |                  |     | Sft  |       |
+                             '-------'-------'-----'                  '-----'------'-------'
   */
-  [L1] = LAYOUT(
-    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,       KC_8,    KC_9,    KC_0,
-    KC_TAB,  KC_QUES, KC_EQL,  KC_MINS, KC_UNDS,                   KC_QUOT, LSFT(KC_2), KC_PLUS, KC_ASTR, KC_ENT,
-    KC_ESC,  KC_EXLM, KC_AMPR, XXXXXXX, XXXXXXX,                   _______, _______,    _______, XXXXXXX, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______
+  [P1] = LAYOUT(
+    KC_ESC,  XXXXXXX,    XXXXXXX,    XXXXXXX,  TO(RS),                         KX_PIPE, KC_SLSH, KC_CIRC, KC_HASH, KX_TILDA,  
+    KC_TAB,  XXXXXXX,    XXXXXXX,    XXXXXXX,  XXXXXXX,                        KC_AMPR, KC_NUBS, KC_GRV,  KC_DLR,  KC_ENT,
+    KC_LSFT, KC_LCTL,    KC_LALT,    KC_DEL,   XXXXXXX,                        KC_PERC, KC_LALT, KC_LCTL, KC_LSFT, _______,
+    XXXXXXX, XXXXXXX,    XXXXXXX,    _______,  XXXXXXX, XXXXXXX,      XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
   ),
 
- /* R1
-  .---------------------------------.         .-------------------------------.
-  | <    | >    | {   | }   | @     |         | $    | £  |     |      | R3   |
-  +------+------+-----+-----|-------|         |------+----+-----+------+------|
-  | [    | ]    | (   | )   | #     |         | '    | "  | ~   | `    | Caps |
-  |------+------+-----+-----+-------|         |------+----+-----+------+------|
-  | /    | \    | ^   | |   | %     |         | ,    | .  | ;   |      | PScn |
-  |------+------+-----+-----+-------+---------+------+----+-----+------+------|
-  | Shft | Ctrl | Alt | Del | Space | L1 | R1 | Shft | R2 | Sup | Ctrl | Alt  |
-  '---------------------------------------------------------------------------'
+  /* P2: Punctuation (2)
+    .-------.-------.-------.-------.-------.                               .-------.-------.-------.-------.------.
+    | Esc   |       | NC    | FV    |       |                               | (     | )     | "     | ?     |      |
+    |-------+-------+-------+-------+-------|                               |-------+-------+-------+-------+------|
+    | Tab   | Ctl-X | Ctl-C | Ctl-V | Ctl-Z |                               | {     | }     | '     | !     | Ent  |
+    |-------+-------+-------+-------+-------|                               |-------+-------+-------+-------+------|
+    | Sft   | Ctl   | Alt   | Del   | Ent   |                               | #     | Alt   | Ctl   | Sft   | Sup  |
+    '-------'-------'-------+-------+-------+-----.                   .-----+-------+-------+-------'-------'------'
+                            | BS    | P2    |     |                   |     | Sft   |       |
+                            '-------'-------'-----'                   '-----'-------'-------'
   */
-  [R1] = LAYOUT(
-    KC_LABK, KC_RABK,  KC_LCBR,  KC_RCBR, KX_AT,                     KC_DLR,  KC_HASH,    XXXXXXX,       XXXXXXX, MO(R3),
-    KC_LBRC, KC_RBRC,  KC_LPRN,  KC_RPRN, KC_NUHS,                   KC_QUOT, LSFT(KC_2), LSFT(KC_NUHS), KC_GRV,  KC_CAPS,
-    KC_SLSH, KC_NUBS,  KC_CIRC,  KX_PIPE, KC_PERC,                   _______, _______,    _______,       XXXXXXX, KC_PSCR,
-    _______, _______,  _______,  KC_DEL,  _______, _______, _______, _______, _______,    _______,       _______, _______
+  [P2] = LAYOUT(
+    KC_ESC,  XXXXXXX,    TO(NC),     TO(FV),     XXXXXXX,                      KC_LPRN, KC_RPRN, KX_DQUOT, KC_QUES, XXXXXXX,
+    KC_TAB,  LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), LCTL(KC_Z),                   KC_LCBR, KC_RCBR, KC_QUOT,  KC_EXLM, KC_ENT,
+    KC_LSFT, KC_LCTL,    KC_LALT,    KC_DEL,     KC_ENT,                       KC_NUHS, KC_LALT, KC_LCTL,  KC_LSFT, _______,
+    XXXXXXX, XXXXXXX,    XXXXXXX,    KC_BSPC,    _______,    XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX
   ),
 
- /* R2
-  .-----------------------------------.         .--------------------.-----------------.
-  | F12  | F11  | F10  | F9   | Copy  |         | Home | Up   | End  | PgUp | Insert   |
-  |------+------+------+------+-------|         |------+------+------+------+----------|
-  | F8   | F7   | F6   | F5   | Paste |         | Left | Down | Right| PgDn | Enter    |
-  |------+------+------+------+-------|         |------+------+------+------+----------|
-  | F4   | F3   | F2   | F1   | Cut   |         | ^Tab |      | Tab  |      |          |
-  |------+------+------+------+-------+---------+------+------+------+------+----------|
-  | Shft | Ctrl | Alt  | Del  | Undo  | L1 | R1 | Shft | R2   | Sup  | Ctrl | WinRight |
-  '------------------------------------------------------------------------------------'
+  /* P3: Punctuation (3)
+    .-------.-------.-------.-------.-------.                             .------.-------.-------.-------.------.
+    | Esc   |       | Break | Pscr  | ScLk  |                             | <    | >     | +     | _     | =    |
+    |-------+-------+-------+-------+-------|                             |------+-------+-------+-------+------|
+    | Tab   |       |       | Caps  |       |                             | [    | ]     | *     | -     | Ent  |
+    |-------+-------+-------+-------+-------|                             |------+-------+-------+-------+------|
+    | Sft   | Ctl   | Alt   | Del   |       |                             | @    | Alt   | Ctl   | Sft   | Sup  |
+    '-------'-------'-------+-------+-------+-----.                 .-----+------+-------+-------'-------'------'
+                            | BS    |       | P3  |                 |     | Sft  |       |
+                            '-------'-------'-----'                 '-----'------'-------'
   */
-  [R2] = LAYOUT(
-    KC_F12,  KC_F11,  KC_F10,  KC_F9,  KX_COPY,                   KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_INS, 
-    KC_F8,   KC_F7,   KC_F6,   KC_F5,  KX_PAST,                   KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_ENT,
-    KC_F4,   KC_F3,   KC_F2,   KC_F1,  KX_CUT,                    KCX_LST, XXXXXXX, KC_TAB,  XXXXXXX, XXXXXXX, 
-    _______, _______, _______, KC_DEL, KX_UNDO, _______, _______, _______, _______, _______, _______, KX_WINR
+  [P3] = LAYOUT(
+    KC_ESC,  XXXXXXX, KC_BRK,  KC_PSCR, KC_SLCK,                             KC_LABK, KC_RABK, KC_PLUS, KC_UNDS, KC_EQL,
+    KC_TAB,  XXXXXXX, XXXXXXX, KC_CAPS, XXXXXXX,                             KC_LBRC, KC_RBRC, KC_ASTR, KC_MINS, KC_ENT,
+    KC_LSFT, KC_LCTL, KC_LALT, KC_DEL,  XXXXXXX,                             KX_AT,   KC_LALT, KC_LCTL, KC_LSFT, _______,
+    XXXXXXX, XXXXXXX, XXXXXXX, KC_BSPC, XXXXXXX, _______,           XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
   ),
 
- /* R3
-  .----------------------------.         .------------------------.
-  | RESET |    |     |    |    |         |    |    |    |    | R3 |
-  |-------+----+-----+----+----|         |----+----+----+----+----|
-  |       |    |     |    |    |         |    |    |    |    |    |
-  |-------+----+-----+----+----|         |----+----+----+----+----|
-  |       |    |     |    |    |         |    |    |    |    |    |
-  |-------+----+-----+----+----+---------+----+----+----+----+----|
-  |       |    |     |    |    |    |    |    |    |    |    |    |
-  '---------------------------------------------------------------'
+  /* NC: Numerals / Cursor control
+    .-------.-------.-------.------.-------.                              .------.-------.-------.------.------.
+    | 1     | 2     | 3     | 4    | 5     |                              | Home | Up    | End   | PgUp |      |
+    |-------+-------+-------+------+-------|                              |------+-------+-------+------+------|
+    | 6     | 7     | 8     | 9    | 0     |                              | Left | Down  | Right | PgDn |      |
+    |-------+-------+-------+------+-------|                              |------+-------+-------+------+------|
+    | Sft   | Ctl   | Alt   | Del  | .     |                              | Ins  | Alt   | Ctl   | Sft  | Sup  |
+    '-------'-------'-------+------+-------+-----.                  .-----+------+-------+-------'------'------'
+                            | BS   | BA    |     |                  |     | Sft  |       |
+                            '------'-------'-----'                  '-----'------'-------'
   */
-  [R3] = LAYOUT(
-    RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+  [NC] = LAYOUT(
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                                KC_HOME, KC_UP,   KC_END,  KC_PGUP, XXXXXXX,
+    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,                                KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, XXXXXXX,
+    KC_LSFT, KC_LCTL, KC_LALT, KC_DEL,  KC_DOT,                              KC_INS,  KC_LALT, KC_LCTL, KC_LSFT, _______,
+    XXXXXXX, XXXXXXX, XXXXXXX, KC_BSPC, TO(BA), XXXXXXX,            XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+  ),
+
+  /* FV: Function keys / Cursor control (Vim)
+    .-------.------.-------.-----.-------.                                .------.-------.-----.-------.------.
+    | F1    | F2   | F3    | F4  | F5    |                                | 0    | K     | $   | Ctl-B |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    | F6    | F7   | F8    | F9  | F10   |                                | H    | J     | L   | Ctl-F |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    | Sft   | Ctl  | Alt   | F11 | F12   |                                |      | Alt   | Ctl | Sft   | Sup  |
+    '-------'------'-------+-----+-------+-----.                    .-----+------+-------+-----'-------'------'
+                           | BS  | BA    |     |                    |     | Sft  |       |
+                           '-----'-------'-----'                    '-----'------'-------'
+  */
+  [FV] = LAYOUT(
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                               KC_0,    KC_K,    KC_DLR,   LCTL(KC_B), XXXXXXX,
+    KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,                              KC_H,    KC_J,    KC_L,     LCTL(KC_F), XXXXXXX,
+    KC_LSFT, KC_LCTL, KC_LALT, KC_F11,  KC_F12,                              XXXXXXX, KC_LALT, KC_LCTL,  KC_LSFT,    _______,
+    XXXXXXX, XXXXXXX, XXXXXXX, KC_BSPC, TO(BA), XXXXXXX,            XXXXXXX, _______, XXXXXXX, XXXXXXX,  XXXXXXX,    XXXXXXX
+  ),
+
+ /* RS: Reset
+    .-------.------.-------.-----.-------.                                .------.-------.-----.-------.------.
+    | RESET |      |       |     |       |                                |      |       |     |       |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    |       |      |       |     |       |                                |      |       |     |       |      |
+    |-------+------+-------+-----+-------|                                |------+-------+-----+-------+------|
+    |       |      |       |     |       |                                |      |       |     |       |      |
+    '-------'------'-------+-----+-------+-----.                    .-----+------+-------+-----'-------'------'
+                           |     | BA    |     |                    |     |      |       |
+                           '-----'-------'-----'                    '-----'------'-------'
+  */
+  [RS] = LAYOUT(
+    RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                             XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                             XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                             XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TO(BA),  XXXXXXX,           XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
   )
 };
 

keyboards/boardwalk/info.json

@@ -0,0 +1,359 @@
+{
+    "keyboard_name": "Boardwalk",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+      "LAYOUT_ortho_5x14": {
+        "layout": [
+          {"label":"k00", "x":0, "y":0, "w":1.5},
+          {"label":"k01", "x":1.5, "y":0},
+          {"label":"k02", "x":2.5, "y":0},
+          {"label":"k03", "x":3.5, "y":0},
+          {"label":"k04", "x":4.5, "y":0},
+          {"label":"k05", "x":5.5, "y":0},
+          {"label":"k06", "x":6.5, "y":0},
+          {"label":"k07", "x":7.5, "y":0},
+          {"label":"k08", "x":8.5, "y":0},
+          {"label":"k09", "x":9.5, "y":0},
+          {"label":"k010", "x":10.5, "y":0},
+          {"label":"k011", "x":11.5, "y":0},
+          {"label":"k012", "x":12.5, "y":0},
+          {"label":"k013", "x":13.5, "y":0, "w":1.5},
+          {"label":"k10", "x":0, "y":1, "w":1.5},
+          {"label":"k11", "x":1.5, "y":1},
+          {"label":"k12", "x":2.5, "y":1},
+          {"label":"k13", "x":3.5, "y":1},
+          {"label":"k14", "x":4.5, "y":1},
+          {"label":"k15", "x":5.5, "y":1},
+          {"label":"k16", "x":6.5, "y":1},
+          {"label":"k17", "x":7.5, "y":1},
+          {"label":"k18", "x":8.5, "y":1},
+          {"label":"k19", "x":9.5, "y":1},
+          {"label":"k110", "x":10.5, "y":1},
+          {"label":"k111", "x":11.5, "y":1},
+          {"label":"k112", "x":12.5, "y":1},
+          {"label":"k113", "x":13.5, "y":1, "w":1.5},
+          {"label":"k20", "x":0, "y":2, "w":1.5},
+          {"label":"k21", "x":1.5, "y":2},
+          {"label":"k22", "x":2.5, "y":2},
+          {"label":"k23", "x":3.5, "y":2},
+          {"label":"k24", "x":4.5, "y":2},
+          {"label":"k25", "x":5.5, "y":2},
+          {"label":"k26", "x":6.5, "y":2},
+          {"label":"k27", "x":7.5, "y":2},
+          {"label":"k28", "x":8.5, "y":2},
+          {"label":"k29", "x":9.5, "y":2},
+          {"label":"k210", "x":10.5, "y":2},
+          {"label":"k211", "x":11.5, "y":2},
+          {"label":"k212", "x":12.5, "y":2},
+          {"label":"k213", "x":13.5, "y":2, "w":1.5},
+          {"label":"k30", "x":0, "y":3, "w":1.5},
+          {"label":"k31", "x":1.5, "y":3},
+          {"label":"k32", "x":2.5, "y":3},
+          {"label":"k33", "x":3.5, "y":3},
+          {"label":"k34", "x":4.5, "y":3},
+          {"label":"k35", "x":5.5, "y":3},
+          {"label":"k36", "x":6.5, "y":3},
+          {"label":"k37", "x":7.5, "y":3},
+          {"label":"k38", "x":8.5, "y":3},
+          {"label":"k39", "x":9.5, "y":3},
+          {"label":"k310", "x":10.5, "y":3},
+          {"label":"k311", "x":11.5, "y":3},
+          {"label":"k312", "x":12.5, "y":3},
+          {"label":"k313", "x":13.5, "y":3, "w":1.5},
+          {"label":"k40", "x":0, "y":4, "w":1.5},
+          {"label":"k41", "x":1.5, "y":4},
+          {"label":"k42", "x":2.5, "y":4},
+          {"label":"k43", "x":3.5, "y":4},
+          {"label":"k44", "x":4.5, "y":4},
+          {"label":"k45", "x":5.5, "y":4},
+          {"label":"k46", "x":6.5, "y":4},
+          {"label":"k47", "x":7.5, "y":4},
+          {"label":"k48", "x":8.5, "y":4},
+          {"label":"k49", "x":9.5, "y":4},
+          {"label":"k410", "x":10.5, "y":4},
+          {"label":"k411", "x":11.5, "y":4},
+          {"label":"k412", "x":12.5, "y":4},
+          {"label":"k413", "x":13.5, "y":4, "w":1.5}
+        ]
+      },
+      "LAYOUT_ortho_hhkb": {
+        "layout": [
+          {"label":"k00", "x":0, "y":0, "w":1.5},
+          {"label":"k01", "x":1.5, "y":0},
+          {"label":"k02", "x":2.5, "y":0},
+          {"label":"k03", "x":3.5, "y":0},
+          {"label":"k04", "x":4.5, "y":0},
+          {"label":"k05", "x":5.5, "y":0},
+          {"label":"k06", "x":6.5, "y":0},
+          {"label":"k07", "x":7.5, "y":0},
+          {"label":"k08", "x":8.5, "y":0},
+          {"label":"k09", "x":9.5, "y":0},
+          {"label":"k010", "x":10.5, "y":0},
+          {"label":"k011", "x":11.5, "y":0},
+          {"label":"k012", "x":12.5, "y":0},
+          {"label":"k013", "x":13.5, "y":0, "w":1.5},
+          {"label":"k10", "x":0, "y":1, "w":1.5},
+          {"label":"k11", "x":1.5, "y":1},
+          {"label":"k12", "x":2.5, "y":1},
+          {"label":"k13", "x":3.5, "y":1},
+          {"label":"k14", "x":4.5, "y":1},
+          {"label":"k15", "x":5.5, "y":1},
+          {"label":"k16", "x":6.5, "y":1},
+          {"label":"k17", "x":7.5, "y":1},
+          {"label":"k18", "x":8.5, "y":1},
+          {"label":"k19", "x":9.5, "y":1},
+          {"label":"k110", "x":10.5, "y":1},
+          {"label":"k111", "x":11.5, "y":1},
+          {"label":"k112", "x":12.5, "y":1},
+          {"label":"k113", "x":13.5, "y":1, "w":1.5},
+          {"label":"k20", "x":0, "y":2, "w":1.5},
+          {"label":"k21", "x":1.5, "y":2},
+          {"label":"k22", "x":2.5, "y":2},
+          {"label":"k23", "x":3.5, "y":2},
+          {"label":"k24", "x":4.5, "y":2},
+          {"label":"k25", "x":5.5, "y":2},
+          {"label":"k26", "x":6.5, "y":2},
+          {"label":"k27", "x":7.5, "y":2},
+          {"label":"k28", "x":8.5, "y":2},
+          {"label":"k29", "x":9.5, "y":2},
+          {"label":"k210", "x":10.5, "y":2},
+          {"label":"k211", "x":11.5, "y":2},
+          {"label":"k212", "x":12.5, "y":2},
+          {"label":"k213", "x":13.5, "y":2, "w":1.5},
+          {"label":"k30", "x":0, "y":3, "w":1.5},
+          {"label":"k31", "x":1.5, "y":3},
+          {"label":"k32", "x":2.5, "y":3},
+          {"label":"k33", "x":3.5, "y":3},
+          {"label":"k34", "x":4.5, "y":3},
+          {"label":"k35", "x":5.5, "y":3},
+          {"label":"k36", "x":6.5, "y":3},
+          {"label":"k37", "x":7.5, "y":3},
+          {"label":"k38", "x":8.5, "y":3},
+          {"label":"k39", "x":9.5, "y":3},
+          {"label":"k310", "x":10.5, "y":3},
+          {"label":"k311", "x":11.5, "y":3},
+          {"label":"k312", "x":12.5, "y":3},
+          {"label":"k313", "x":13.5, "y":3, "w":1.5},
+          {"label":"k41", "x":1.5, "y":4},
+          {"label":"k42", "x":2.5, "y":4},
+          {"label":"k43", "x":3.5, "y":4},
+          {"label":"k44", "x":4.5, "y":4},
+          {"label":"k45", "x":5.5, "y":4, "w":2},
+          {"label":"k47", "x":7.5, "y":4, "w":2},
+          {"label":"k49", "x":9.5, "y":4},
+          {"label":"k410", "x":10.5, "y":4},
+          {"label":"k411", "x":11.5, "y":4},
+          {"label":"k412", "x":12.5, "y":4}
+        ]
+      },
+      "LAYOUT_ortho_7u": {
+        "layout": [
+          {"label":"k00", "x":0, "y":0, "w":1.5},
+          {"label":"k01", "x":1.5, "y":0},
+          {"label":"k02", "x":2.5, "y":0},
+          {"label":"k03", "x":3.5, "y":0},
+          {"label":"k04", "x":4.5, "y":0},
+          {"label":"k05", "x":5.5, "y":0},
+          {"label":"k06", "x":6.5, "y":0},
+          {"label":"k07", "x":7.5, "y":0},
+          {"label":"k08", "x":8.5, "y":0},
+          {"label":"k09", "x":9.5, "y":0},
+          {"label":"k010", "x":10.5, "y":0},
+          {"label":"k011", "x":11.5, "y":0},
+          {"label":"k012", "x":12.5, "y":0},
+          {"label":"k013", "x":13.5, "y":0, "w":1.5},
+          {"label":"k10", "x":0, "y":1, "w":1.5},
+          {"label":"k11", "x":1.5, "y":1},
+          {"label":"k12", "x":2.5, "y":1},
+          {"label":"k13", "x":3.5, "y":1},
+          {"label":"k14", "x":4.5, "y":1},
+          {"label":"k15", "x":5.5, "y":1},
+          {"label":"k16", "x":6.5, "y":1},
+          {"label":"k17", "x":7.5, "y":1},
+          {"label":"k18", "x":8.5, "y":1},
+          {"label":"k19", "x":9.5, "y":1},
+          {"label":"k110", "x":10.5, "y":1},
+          {"label":"k111", "x":11.5, "y":1},
+          {"label":"k112", "x":12.5, "y":1},
+          {"label":"k113", "x":13.5, "y":1, "w":1.5},
+          {"label":"k20", "x":0, "y":2, "w":1.5},
+          {"label":"k21", "x":1.5, "y":2},
+          {"label":"k22", "x":2.5, "y":2},
+          {"label":"k23", "x":3.5, "y":2},
+          {"label":"k24", "x":4.5, "y":2},
+          {"label":"k25", "x":5.5, "y":2},
+          {"label":"k26", "x":6.5, "y":2},
+          {"label":"k27", "x":7.5, "y":2},
+          {"label":"k28", "x":8.5, "y":2},
+          {"label":"k29", "x":9.5, "y":2},
+          {"label":"k210", "x":10.5, "y":2},
+          {"label":"k211", "x":11.5, "y":2},
+          {"label":"k212", "x":12.5, "y":2},
+          {"label":"k213", "x":13.5, "y":2, "w":1.5},
+          {"label":"k30", "x":0, "y":3, "w":1.5},
+          {"label":"k31", "x":1.5, "y":3},
+          {"label":"k32", "x":2.5, "y":3},
+          {"label":"k33", "x":3.5, "y":3},
+          {"label":"k34", "x":4.5, "y":3},
+          {"label":"k35", "x":5.5, "y":3},
+          {"label":"k36", "x":6.5, "y":3},
+          {"label":"k37", "x":7.5, "y":3},
+          {"label":"k38", "x":8.5, "y":3},
+          {"label":"k39", "x":9.5, "y":3},
+          {"label":"k310", "x":10.5, "y":3},
+          {"label":"k311", "x":11.5, "y":3},
+          {"label":"k312", "x":12.5, "y":3},
+          {"label":"k313", "x":13.5, "y":3, "w":1.5},
+          {"label":"k41", "x":1.5, "y":4},
+          {"label":"k42", "x":2.5, "y":4, "w":1.5},
+          {"label":"k46", "x":4, "y":4, "w":7},
+          {"label":"k411", "x":11, "y":4, "w":1.5},
+          {"label":"k412", "x":12.5, "y":4}
+        ]
+      },
+      "LAYOUT_2u_arrow": {
+        "layout": [
+          {"label":"k00", "x":0, "y":0, "w":1.5},
+          {"label":"k01", "x":1.5, "y":0},
+          {"label":"k02", "x":2.5, "y":0},
+          {"label":"k03", "x":3.5, "y":0},
+          {"label":"k04", "x":4.5, "y":0},
+          {"label":"k05", "x":5.5, "y":0},
+          {"label":"k06", "x":6.5, "y":0},
+          {"label":"k07", "x":7.5, "y":0},
+          {"label":"k08", "x":8.5, "y":0},
+          {"label":"k09", "x":9.5, "y":0},
+          {"label":"k010", "x":10.5, "y":0},
+          {"label":"k011", "x":11.5, "y":0},
+          {"label":"k012", "x":12.5, "y":0},
+          {"label":"k013", "x":13.5, "y":0, "w":1.5},
+          {"label":"k10", "x":0, "y":1, "w":1.5},
+          {"label":"k11", "x":1.5, "y":1},
+          {"label":"k12", "x":2.5, "y":1},
+          {"label":"k13", "x":3.5, "y":1},
+          {"label":"k14", "x":4.5, "y":1},
+          {"label":"k15", "x":5.5, "y":1},
+          {"label":"k16", "x":6.5, "y":1},
+          {"label":"k17", "x":7.5, "y":1},
+          {"label":"k18", "x":8.5, "y":1},
+          {"label":"k19", "x":9.5, "y":1},
+          {"label":"k110", "x":10.5, "y":1},
+          {"label":"k111", "x":11.5, "y":1},
+          {"label":"k112", "x":12.5, "y":1},
+          {"label":"k113", "x":13.5, "y":1, "w":1.5},
+          {"label":"k20", "x":0, "y":2, "w":1.5},
+          {"label":"k21", "x":1.5, "y":2},
+          {"label":"k22", "x":2.5, "y":2},
+          {"label":"k23", "x":3.5, "y":2},
+          {"label":"k24", "x":4.5, "y":2},
+          {"label":"k25", "x":5.5, "y":2},
+          {"label":"k26", "x":6.5, "y":2},
+          {"label":"k27", "x":7.5, "y":2},
+          {"label":"k28", "x":8.5, "y":2},
+          {"label":"k29", "x":9.5, "y":2},
+          {"label":"k210", "x":10.5, "y":2},
+          {"label":"k211", "x":11.5, "y":2},
+          {"label":"k212", "x":12.5, "y":2, "w":1.5},
+          {"label":"k213", "x":14, "y":2},
+          {"label":"k30", "x":0, "y":3, "w":1.5},
+          {"label":"k31", "x":1.5, "y":3},
+          {"label":"k32", "x":2.5, "y":3},
+          {"label":"k33", "x":3.5, "y":3},
+          {"label":"k34", "x":4.5, "y":3},
+          {"label":"k35", "x":5.5, "y":3},
+          {"label":"k36", "x":6.5, "y":3},
+          {"label":"k37", "x":7.5, "y":3},
+          {"label":"k38", "x":8.5, "y":3},
+          {"label":"k39", "x":9.5, "y":3},
+          {"label":"k310", "x":10.5, "y":3},
+          {"label":"k311", "x":11.5, "y":3, "w":1.5},
+          {"label":"k312", "x":13, "y":3},
+          {"label":"k313", "x":14, "y":3},
+          {"label":"k40", "x":0, "y":4, "w":1.25},
+          {"label":"k41", "x":1.25, "y":4, "w":1.25},
+          {"label":"k42", "x":2.5, "y":4},
+          {"label":"k43", "x":3.5, "y":4},
+          {"label":"k44", "x":4.5, "y":4, "w":2},
+          {"label":"k46", "x":6.5, "y":4, "w":2},
+          {"label":"k48", "x":8.5, "y":4},
+          {"label":"k49", "x":9.5, "y":4, "w":1.25},
+          {"label":"k410", "x":10.75, "y":4, "w":1.25},
+          {"label":"k411", "x":12, "y":4},
+          {"label":"k412", "x":13, "y":4},
+          {"label":"k413", "x":14, "y":4}
+        ]
+      },
+      "LAYOUT_625u_arrow": {
+        "layout": [
+          {"label":"k00", "x":0, "y":0, "w":1.5},
+          {"label":"k01", "x":1.5, "y":0},
+          {"label":"k02", "x":2.5, "y":0},
+          {"label":"k03", "x":3.5, "y":0},
+          {"label":"k04", "x":4.5, "y":0},
+          {"label":"k05", "x":5.5, "y":0},
+          {"label":"k06", "x":6.5, "y":0},
+          {"label":"k07", "x":7.5, "y":0},
+          {"label":"k08", "x":8.5, "y":0},
+          {"label":"k09", "x":9.5, "y":0},
+          {"label":"k010", "x":10.5, "y":0},
+          {"label":"k011", "x":11.5, "y":0},
+          {"label":"k012", "x":12.5, "y":0},
+          {"label":"k013", "x":13.5, "y":0, "w":1.5},
+          {"label":"k10", "x":0, "y":1, "w":1.5},
+          {"label":"k11", "x":1.5, "y":1},
+          {"label":"k12", "x":2.5, "y":1},
+          {"label":"k13", "x":3.5, "y":1},
+          {"label":"k14", "x":4.5, "y":1},
+          {"label":"k15", "x":5.5, "y":1},
+          {"label":"k16", "x":6.5, "y":1},
+          {"label":"k17", "x":7.5, "y":1},
+          {"label":"k18", "x":8.5, "y":1},
+          {"label":"k19", "x":9.5, "y":1},
+          {"label":"k110", "x":10.5, "y":1},
+          {"label":"k111", "x":11.5, "y":1},
+          {"label":"k112", "x":12.5, "y":1},
+          {"label":"k113", "x":13.5, "y":1, "w":1.5},
+          {"label":"k20", "x":0, "y":2, "w":1.5},
+          {"label":"k21", "x":1.5, "y":2},
+          {"label":"k22", "x":2.5, "y":2},
+          {"label":"k23", "x":3.5, "y":2},
+          {"label":"k24", "x":4.5, "y":2},
+          {"label":"k25", "x":5.5, "y":2},
+          {"label":"k26", "x":6.5, "y":2},
+          {"label":"k27", "x":7.5, "y":2},
+          {"label":"k28", "x":8.5, "y":2},
+          {"label":"k29", "x":9.5, "y":2},
+          {"label":"k210", "x":10.5, "y":2},
+          {"label":"k211", "x":11.5, "y":2},
+          {"label":"k212", "x":12.5, "y":2, "w":1.5},
+          {"label":"k213", "x":14, "y":2},
+          {"label":"k30", "x":0, "y":3, "w":1.5},
+          {"label":"k31", "x":1.5, "y":3},
+          {"label":"k32", "x":2.5, "y":3},
+          {"label":"k33", "x":3.5, "y":3},
+          {"label":"k34", "x":4.5, "y":3},
+          {"label":"k35", "x":5.5, "y":3},
+          {"label":"k36", "x":6.5, "y":3},
+          {"label":"k37", "x":7.5, "y":3},
+          {"label":"k38", "x":8.5, "y":3},
+          {"label":"k39", "x":9.5, "y":3},
+          {"label":"k310", "x":10.5, "y":3},
+          {"label":"k311", "x":11.5, "y":3, "w":1.5},
+          {"label":"k312", "x":13, "y":3},
+          {"label":"k313", "x":14, "y":3},
+          {"label":"k40", "x":0, "y":4, "w":1.25},
+          {"label":"k41", "x":1.25, "y":4, "w":1.25},
+          {"label":"k42", "x":2.5, "y":4},
+          {"label":"k45", "x":3.5, "y":4, "w":6.25},
+          {"label":"k49", "x":9.75, "y":4},
+          {"label":"k410", "x":10.75, "y":4, "w":1.25},
+          {"label":"k411", "x":12, "y":4},
+          {"label":"k412", "x":13, "y":4},
+          {"label":"k413", "x":14, "y":4}
+        ]
+      }
+    }
+  }

keyboards/boardwalk/readme.md

@@ -0,0 +1,16 @@
+# Boardwalk
+
+![Boardwalk](https://i.imgur.com/CQj3b9E.jpg)
+
+The Boardwalk is a 60% ortholinear keyboard, designed around Ergodox keycap sets and to fit into many standard 60% cases. The project was inspired by OLKB’s Atomic keyboard, which used larger 2u mods, but u/shensmobile
+decided to switch to 1.5u keys so that Ergodox sets would provide excellent compatibility. The rest of the board can be covered using standard key sizes from 60% sets.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: Boardwalk Ortholinear PCB  
+Hardware Availability: [panc.co](https://www.panc.co/boardwalk-group-buy.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make boardwalk:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/chimera_ortho/keymaps/dcompact/readme.md

@@ -34,10 +34,10 @@ merge with those in the keyboard folder_
 
 ## Relevant Links
 
-- ![Online Dvorak Layout Trainer](https://learn.dvorak.nl/)
-- ![Dvorak Wikipedia Page](https://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard)
-- ![QMK Docs](https://docs.qmk.fm/#/)
-- ![QMK KeyCode Reference](https://docs.qmk.fm/#/keycodes)
+- [Online Dvorak Layout Trainer](https://learn.dvorak.nl/)
+- [Dvorak Wikipedia Page](https://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard)
+- [QMK Docs](https://docs.qmk.fm/#/)
+- [QMK KeyCode Reference](https://docs.qmk.fm/#/keycodes)
 
 ## Contact
 

keyboards/clueboard/60/config.h

@@ -47,7 +47,7 @@
  *
 */
 #define MATRIX_ROW_PINS { B0, B1, B2, A15, A10 }
-#define MATRIX_COL_PINS { A2, A3, A6, B14, B15, A8, A9, A7, B3, B4, C14, C15, C13, B5, B6 }
+#define MATRIX_COL_PINS { A2, A3, A6, B14, B15, A8, A9, A7, B3, B4, C15, C14, C13, B5, B6 }
 #define UNUSED_PINS { A0, A1, A9, B7, B8, B9, B10, B11, B12, B13 }
 #define DIODE_DIRECTION COL2ROW
 

keyboards/clueboard/66/rev4/config.h

@@ -37,6 +37,17 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define IS31FL3235A_COUNT 1
+//#define I2C_DRIVER I2CD1
+#define I2C1_BANK GPIOB
+#define I2C1_SCL 8
+#define I2C1_SDA 9
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/clueboard/66/rev4/halconf.h

@@ -76,7 +76,7 @@
  * @brief   Enables the I2C subsystem.
  */
 #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 FALSE
+#define HAL_USE_I2C                 TRUE
 #endif
 
 /**

keyboards/clueboard/66/rev4/mcuconf.h

@@ -154,7 +154,7 @@
 /*
  * I2C driver system settings.
  */
-#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C1                  TRUE
 #define STM32_I2C_USE_I2C2                  FALSE
 #define STM32_I2C_BUSY_TIMEOUT              50
 #define STM32_I2C_I2C1_IRQ_PRIORITY         10

keyboards/clueboard/66/rev4/rules.mk

@@ -17,6 +17,8 @@ DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
 # Build Options
 #   comment out to disable the options.
 #
+QWIIC_ENABLE = RGB7SEG
+
 BACKLIGHT_ENABLE = yes
 BOOTMAGIC_ENABLE = no   # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes   # Mouse keys(+4700)

keyboards/clueboard/66_hotswap/gen1/config.h

@@ -130,6 +130,15 @@
  */
 #define BACKLIGHT_LEVELS 10
 
+// For the rgb7seg
+#define IS31FL3235A_COUNT 1
+/*
+#define I2C_DRIVER I2CD2
+#define I2C1_BANK GPIOA
+#define I2C1_SCL 9
+#define I2C1_SDA 10
+*/
+
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
 // The address will vary depending on your wiring:
@@ -138,6 +147,9 @@
 // 0b1110101 AD <-> SCL
 // 0b1110110 AD <-> SDA
 #define LED_DRIVER_ADDR_1 0b1110100
+
+/* For the LED driver
+ */
 #define I2C1_BANK GPIOB
 #define I2C1_SCL 8
 #define I2C1_SDA 9

keyboards/clueboard/66_hotswap/gen1/gen1.c

@@ -14,7 +14,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "gen1.h"
-#include "is31fl3731-simple.h"
 
 void matrix_init_kb(void) {
 }
@@ -23,6 +22,8 @@ void matrix_scan_kb(void) {
 }
 
 #ifdef LED_MATRIX_ENABLE
+#include "is31fl3731-simple.h"
+
 const is31_led g_is31_leds[LED_DRIVER_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *  driver
@@ -102,7 +103,6 @@ const is31_led g_is31_leds[LED_DRIVER_LED_COUNT] = {
 };
 
 const led_matrix g_leds[LED_DRIVER_LED_COUNT] = {
-
     /*{row | col << 4}
       |            LED_ROW_COL(row, col)
       |             |            modifier

keyboards/clueboard/66_hotswap/gen1/mcuconf.h

@@ -155,7 +155,7 @@
  * I2C driver system settings.
  */
 #define STM32_I2C_USE_I2C1                  TRUE
-#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C2                  TRUE
 #define STM32_I2C_BUSY_TIMEOUT              50
 #define STM32_I2C_I2C1_IRQ_PRIORITY         10
 #define STM32_I2C_I2C2_IRQ_PRIORITY         10

keyboards/clueboard/66_hotswap/gen1/rules.mk

@@ -41,6 +41,9 @@ DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
 # LED Configuration
 LED_MATRIX_ENABLE = IS31FL3731
 
+# QWIIC Devices
+#QWIIC_ENABLE = RGB7SEG
+
 # Build Options
 #   comment out to disable the options.
 #

keyboards/clueboard/66_hotswap/prototype/prototype.h

@@ -28,7 +28,7 @@
 // The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
 
-#define LAYOUT_all( \
+#define LAYOUT( \
     k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54,    k56,   k57, \
     k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65,      k67, \
     k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73,    k75, \
@@ -47,25 +47,6 @@
     { k90, KC_NO, k92, k93, k94, k95, k96, k97 }  \
 }
 
-#define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54,    k56,   k57, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65,      k67, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73,    k75, \
-    k30,      k32, k33, k34, k35, k36, k37, k80, k81, k82, k83,      k85, k86, \
-    k40, k41, k42,           k45, k46,      k90,      k92, k93, k94, k95, k96, k97 \
-) { \
-    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
-    { k10, k11, k12, k13, k14, k15, k16, k17 }, \
-    { k20, k21, k22, k23, k24, k25, k26, k27 }, \
-    { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \
-    { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \
-    { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \
-    { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
-    { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
-    { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \
-    { k90, KC_NO, k92, k93, k94, k95, k96, k97 }  \
-}
-
 #define LAYOUT_66_ansi( \
     k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54,    k56,   k57, \
     k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65,      k67, \

keyboards/converter/numeric_keypad_IIe/config.h

@@ -0,0 +1,101 @@
+/*
+Copyright 2019 Adam Newbold <adam@neatnik.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Apple Inc.
+#define PRODUCT         Numeric Keypad IIe
+#define DESCRIPTION     "Numeric Keypad IIe, A2M2003"
+
+/*
+
+Pin Mappings
+============
+
+Dsub-15 Connection
+------------------
+
+          Dsub-15 (female)
+    ,-------------------------.
+    \ 08 07 06 05 04 03 02 01 /
+     \ 15 14 13 12 11 10 09  /
+      `---------------------'
+
+Header Pins
+-----------
+ _____________________________________
+|                                     |
+|  11  10  9  8  7  6  5  4  3  2  1  |
+|_____________________________________|
+
+
+Header / Matrix
+---------------
+
+Pin             Name        Description                                
+--------------------------------------------------------------
+1,2,5,3,4,6     Y0-Y5       Y-direction key-matrix connections
+7               NC                                          
+9,11,10,8       X4-X7       X-direction key-matrix connections
+
+
+Microcontroller Configuration
+-----------------------------
+
+(Pins are for an Arduino Micro)
+
++-----------------------------------+
+| Dsub-15 | Header | Matrix | Micro |
+|---------+--------+--------+-------|
+|   12    |   11   |   X5   |   B0  |
+|   11    |   10   |   X6   |   D3  |
+|   10    |    9   |   X4   |   B2  |
+|    9    |    8   |   X7   |   D2  |
+|   NC    |    7   |   NC   |   --  |
+|    7    |    6   |   Y5   |   E6  |
+|    6    |    5   |   Y2   |   D4  |
+|    5    |    4   |   Y4   |   D7  |
+|    3    |    3   |   Y3   |   C6  |
+|    2    |    2   |   Y1   |   D0  |
+|    1    |    1   |   Y0   |   D1  |
++-----------------------------------+
+
+Note: Dsub-15 pins 4, 8, 13, 14, and 15 are unused
+
+Reference
+---------
+
+https://deskthority.net/wiki/Apple_Numeric_Keypad_IIe
+https://geekhack.org/index.php?topic=78048.0
+http://wiki.apple2.org/index.php?title=Pinouts#Apple_.2F.2Fe_Numeric_Keypad_connector
+
+*/
+
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 6
+#define MATRIX_ROW_PINS { B0, B2, D2, D3 }
+#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6 }
+#define UNUSED_PINS
+#define DIODE_DIRECTION COL2ROW
+#define SOFT_SERIAL_PIN D0
+#define DEBOUNCING_DELAY 5

keyboards/converter/numeric_keypad_IIe/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Numeric Keypad IIe", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 7.5, 
+    "height": 4, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"7", "x":2, "y":0}, {"label":"8", "x":3, "y":0}, {"label":"9", "x":4, "y":0}, {"label":"(", "x":5.5, "y":0}, {"label":")", "x":6.5, "y":0}, {"label":"\u2190", "x":0, "y":1}, {"label":"4", "x":2, "y":1}, {"label":"5", "x":3, "y":1}, {"label":"6", "x":4, "y":1}, {"label":"\u2212", "x":5.5, "y":1}, {"label":"\u00f7", "x":6.5, "y":1}, {"label":"\u2192", "x":0, "y":2}, {"label":"1", "x":2, "y":2}, {"label":"2", "x":3, "y":2}, {"label":"3", "x":4, "y":2}, {"label":"+", "x":5.5, "y":2}, {"label":"\u00d7", "x":6.5, "y":2}, {"label":"Space", "x":0, "y":3}, {"label":"0", "x":1.5, "y":3, "w":1.5}, {"label":",", "x":3, "y":3}, {"label":".", "x":4, "y":3}, {"label":"Ret", "x":5.5, "y":3}, {"label":"Print", "x":6.5, "y":3}]
+        }
+    }
+}

keyboards/converter/numeric_keypad_IIe/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 Adam Newbold <adam@neatnik.net>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/converter/numeric_keypad_IIe/keymaps/default/keymap.c

@@ -0,0 +1,62 @@
+/* Copyright 2019 Adam Newbold <adam@neatnik.net>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/*
+ +-------+     +-------+-------+-------+  +-------+-------+
+ |  Esc  |     |  7    |  8    |  9    |  |  (    |  )    |
+ +-------+     +-------+-------+-------+  +-------+-------+
+ |  <--  |     |  4    |  5    |  6    |  |  -    |  /    |
+ +-------+     +-------+-------+-------+  +-------+-------+
+ |  -->  |     |  1    |  2    |  3    |  |  +    |  *    |
+ +-------+  +--+-------+-------+-------+  +-------+-------+
+ | Space |  |  0       |  ,    |  .    |  |  Ret  | Print |
+ +-------+  +----------+-------+-------+  +-------+-------+
+*/
+  [0] = LAYOUT(
+    KC_ESCAPE,  KC_KP_7,  KC_KP_8,      KC_KP_9,    KC_LEFT_PAREN,  KC_RIGHT_PAREN, \
+    KC_LEFT,    KC_KP_4,  KC_KP_5,      KC_KP_6,    KC_KP_MINUS,    KC_KP_SLASH, \
+    KC_RIGHT,   KC_KP_1,  KC_KP_2,      KC_KP_3,    KC_KP_PLUS,     KC_KP_ASTERISK, \
+    KC_SPACE,   KC_KP_0,  KC_KP_COMMA,  KC_KP_DOT,  KC_RETURN,      KC_QUESTION  \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void keyboard_post_init_user(void) {
+
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/converter/numeric_keypad_IIe/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# Numeric Keypad //e Default Keymap
+
+All keys perform their default functions displayed on the stock keycaps. Note that the "Print" key presses a question mark (?), which was the default behavior on the Apple //e (with ? the shorthand for the AppleSoft BASIC PRINT command).

keyboards/converter/numeric_keypad_IIe/keymaps/newbold/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 Adam Newbold <adam@neatnik.net>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/converter/numeric_keypad_IIe/keymaps/newbold/keymap.c

@@ -0,0 +1,68 @@
+/* Copyright 2019 Adam Newbold <adam@neatnik.net>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/*
+ +-------+     +-------+-------+-------+  +-------+-------+
+ |  Esc  |     |  7    |  8    |  9    |  |  (    |  )    |
+ +-------+     +-------+-------+-------+  +-------+-------+
+ |  <--  |     |  4    |  5    |  6    |  |  -    |  /    |
+ +-------+     +-------+-------+-------+  +-------+-------+
+ |  -->  |     |  1    |  2    |  3    |  |  +    |  *    |
+ +-------+  +--+-------+-------+-------+  +-------+-------+
+ | Space |  |  0       |  ,    |  .    |  |  Ret  | Print |
+ +-------+  +----------+-------+-------+  +-------+-------+
+*/
+  [0] = LAYOUT(
+    KC__MUTE,     KC_KP_7,  KC_KP_8,      KC_KP_9,    KC_LEFT_PAREN,  KC_RIGHT_PAREN, \
+    KC__VOLDOWN,  KC_KP_4,  KC_KP_5,      KC_KP_6,    KC_KP_MINUS,    KC_KP_SLASH, \
+    KC__VOLUP,    KC_KP_1,  KC_KP_2,      KC_KP_3,    KC_KP_PLUS,     KC_KP_ASTERISK, \
+    MO(1),        KC_KP_0,  KC_KP_COMMA,  KC_KP_DOT,  KC_RETURN,      KC_QUESTION  \
+  ),
+  [1] = LAYOUT(
+    KC_TRNS,      KC_TRNS,  KC_TRNS,      KC_TRNS,    KC_TRNS,        KC_TRNS, \
+    KC_BRMD,      KC_TRNS,  KC_TRNS,      KC_TRNS,    KC_TRNS,        KC_TRNS, \
+    KC_BRMU,      KC_TRNS,  KC_TRNS,      KC_TRNS,    KC_TRNS,        KC_TRNS, \
+    KC_TRNS,      KC_TRNS,  KC_TRNS,      KC_TRNS,    KC_TRNS,        RESET  \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void keyboard_post_init_user(void) {
+
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/converter/numeric_keypad_IIe/keymaps/newbold/readme.md

@@ -0,0 +1,28 @@
+# @newbold's layout for the Numeric Keypad IIe
+
+Includes the standard layout for all keys except for the left-most column, which is remapped to these keys:
+
+ +-----------------+
+ |       Mute      |
+ +-----------------+
+ |   Volume Down   |
+ +-----------------+
+ |    Volume Up    |
+ +-----------------+
+ |     Function    |
+ +-----------------+
+ 
+ With Function held down:
+ 
+ +-----------------+
+ |       Mute      |
+ +-----------------+
+ | Brightness Down |
+ +-----------------+
+ |  Brightness Up  |
+ +-----------------+
+ |     Function    |
+ +-----------------+
+ 
+ And also with Function held down, "Print" (the lower right key) will trigger RESET (putting the controller into bootloader mode so it can be flashed).
+ 

keyboards/converter/numeric_keypad_IIe/numeric_keypad_IIe.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 Adam Newbold <adam@neatnik.net>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "numeric_keypad_IIe.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/converter/numeric_keypad_IIe/numeric_keypad_IIe.h

@@ -0,0 +1,30 @@
+/* Copyright Adam Newbold <adam@neatnik.net>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "quantum.h"
+
+#define LAYOUT( \
+    K_ESC,   K_7, K_8,     K_9,   K_LEFT_PARENS, K_RIGHT_PARENS, \
+    K_LEFT,  K_4, K_5,     K_6,   K_MINUS,       K_DIVIDE,       \
+    K_RIGHT, K_1, K_2,     K_3,   K_PLUS,        K_MULTIPLY,     \
+    K_SPACE, K_0, K_COMMA, K_DOT, K_RETURN,      K_PRINT         \
+){ \
+    { K_RIGHT_PARENS, K_ESC,   K_4,           K_5,     K_6,      K_7     },\
+    { K_DIVIDE,       K_LEFT,  K_0,           K_1,     K_2,      K_3     },\
+    { K_PRINT,        K_SPACE, K_LEFT_PARENS, K_MINUS, K_RETURN, K_COMMA },\
+    { K_MULTIPLY,     K_RIGHT, K_8,           K_9,     K_DOT,    K_PLUS  },\
+}

keyboards/converter/numeric_keypad_IIe/readme.md

@@ -0,0 +1,16 @@
+# Numeric Keypad IIe
+
+![Numeric Keypad IIe](https://upload.wikimedia.org/wikipedia/commons/3/3b/Apple_Numeric_Keypad_IIe.jpg)
+
+This is a conversion project for the Numeric Keypad IIe, model A2M2003. This was an external keypad that connected to the Apple //e's motherboard (and as such, it lacked any kind of onboard controller).
+
+The reference conversion setup uses the keyboard's DB15 (VGA) fixed cable connected to a DB15 wiring terminal with breakout board ([this one](https://www.amazon.com/gp/product/B07437293Y/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1), specifically) and wired to an [Arduino Micro](https://store.arduino.cc/usa/arduino-micro).
+
+Keyboard Maintainer: [Adam Newbold](https://github.com/newbold)  
+Hardware Supported: Internal Numeric Keypad IIe PCB (Apple part 820.0081.c), ATmega32U4 microcontroller
+
+Make example for this keyboard (after setting up your build environment):
+
+    make converter/numeric_keypad_IIe:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/converter/numeric_keypad_IIe/rules.mk

@@ -12,8 +12,7 @@ MCU = atmega32u4
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
-F_CPU = 8000000
-
+F_CPU = 16000000
 
 #
 # LUFA specific
@@ -37,7 +36,6 @@ F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
@@ -47,7 +45,6 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   atmega32a    bootloadHID
 BOOTLOADER = caterina
 
-
 # If you don't know the bootloader type, then you can specify the
 # Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
 #   Teensy halfKay      512
@@ -57,11 +54,10 @@ BOOTLOADER = caterina
 #   USBaspLoader        2048
 # OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
-
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = yes        # Console for debug(+400)
@@ -71,9 +67,10 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI controls
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
-
-BLUETOOTH = AdafruitBLE
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/converter/usb_usb/custom_matrix.cpp

@@ -98,6 +98,7 @@ extern "C"
         kbd2.SetReportParser(0, (HIDReportParser*)&kbd_parser2);
         kbd3.SetReportParser(0, (HIDReportParser*)&kbd_parser3);
         kbd4.SetReportParser(0, (HIDReportParser*)&kbd_parser4);
+        matrix_init_quantum();
     }
 
     static void or_report(report_keyboard_t report) {
@@ -115,6 +116,24 @@ extern "C"
         }
     }
 
+    __attribute__ ((weak))
+    void matrix_init_kb(void) {
+        matrix_init_user();
+    }
+
+    __attribute__ ((weak))
+    void matrix_init_user(void) {
+    }
+
+    __attribute__ ((weak))
+    void matrix_scan_kb(void) {
+        matrix_scan_user();
+    }
+
+    __attribute__ ((weak))
+    void matrix_scan_user(void) {
+    }
+
     uint8_t matrix_scan(void) {
         static uint16_t last_time_stamp1 = 0;
         static uint16_t last_time_stamp2 = 0;
@@ -169,6 +188,7 @@ extern "C"
                 keyboard_set_leds(host_keyboard_leds());
             }
         }
+        matrix_scan_quantum();
         return 1;
     }
 

keyboards/crkbd/keymaps/edvorakjp/config.h

@@ -3,15 +3,16 @@
 
 /* Select hand configuration */
 
-#define MASTER_LEFT
-// #define MASTER_RIGHT
+// #define MASTER_LEFT
+#define MASTER_RIGHT
 // #define EE_HANDS
 
 #define SSD1306OLED
 #define SWAP_SCLN
 
 // #define TAPPING_FORCE_HOLD
-#define TAPPING_TERM 120
+#define TAPPING_TERM 300
+#define IGNORE_MOD_TAP_INTERRUPT
 
 #undef RGBLED_NUM
 #define RGBLIGHT_EFFECT_STATIC_GRADIENT

keyboards/crkbd/keymaps/edvorakjp/keymap.c

@@ -16,113 +16,61 @@
 
 #define KC_ KC_TRNS
 
-#define KC_TMB1 LGUI_T(KC_TAB)
-#define KC_TMB2 LSFT_T(KC_SPC)
+#define KC_TMB1 KC_LA(TAB)
+#define KC_TMB2 KC_LS(SPC)
 #define KC_TMB3 TD(TD_LOWER) // act as LOWER when hold, as KC_LANG2(=English) when tapped
 #define KC_TMB4 TD(TD_RAISE) // act as RAISE when hold, as KC_LANG1(=Japanese) when tapped
-#define KC_TMB5 RCTL_T(KC_BSPC)
-#define KC_TMB6 RALT_T(KC_ENT)
-#define KC_TMB7 KC_DEL
-#define KC_TMB8 RALT(KC_ENT)
-#define KC_TMB9 LGUI(KC_TAB)
-
-#define KC_RST  RESET
-#define KC_DBUG DEBUG
-#define KC_RTOG RGB_TOG
-#define KC_EDJP EDVORAK
-#define KC_QWER QWERTY
+#define KC_TMB5 KC_RC(BSPC)
+#define KC_TMB6 KC_RG(ENT)
+#define KC_TMB7 KC_RC(DEL)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_EDVORAK] = LAYOUT_kc(
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-     ESC ,QUOT,COMM,DOT , Y  , P  ,             F  , G  , R  , W  , Q  ,BSLS,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-     EQL , A  , O  , E  , I  , U  ,             D  , T  , N  , S  , M  ,MINS,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-     GRV ,SCLN, X  , C  , V  , Z  ,             B  , H  , J  , K  , L  ,SLSH,
-  //`----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
-                         TMB1,TMB2,TMB3,  TMB4,TMB5,TMB6
-  //                    `----+----+----' `----+----+----'
-  ),
-
-  [_EDVORAKJ1] = LAYOUT_kc(
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         , AI , OU , EI ,    ,    ,                ,    ,    ,    ,    ,    ,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,                ,    ,    , Y  ,    ,    ,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         ,ANN ,ONN ,ENN ,INN ,UNN ,                ,    ,    ,    ,    ,    ,
-  //`----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
-                             ,    ,    ,      ,    ,
-  //                    `----+----+----' `----+----+----'
-  ),
-
-  [_EDVORAKJ2] = LAYOUT_kc(
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         , AI , OU , EI ,    ,    ,                ,    ,    ,    ,    ,    ,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,                , Y  ,    ,    ,    ,    ,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         ,ANN ,ONN ,ENN ,INN ,UNN ,                ,    ,    ,    ,    ,    ,
-  //`----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
-                             ,    ,    ,      ,    ,
-  //                    `----+----+----' `----+----+----'
-  ),
-
-  [_QWERTY] = LAYOUT_kc(
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-     TAB , Q  , W  , E  , R  , T  ,             Y  , U  , I  , O  , P  ,MINS,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-     EQL , A  , S  , D  , F  , G  ,             H  , J  , K  , L  ,SCLN,QUOT,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-     GRV , Z  , X  , C  , V  , B  ,             N  , M  ,COMM,DOT ,SLSH,BSLS,
-  //`----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
-                             ,    ,    ,      ,    ,
-  //                    `----+----+----' `----+----+----'
+  //|----+----+-----+-----+-----+----|           |----+-----+-----+-----+----+----|
+     GRV ,QUOT,COMM , DOT ,  Y  , Q  ,             F  ,  G  ,  R  ,  W  , P  ,BSLS,
+  //|----+----+-----+-----+-----+----|           |----+-----+-----+-----+----+----|
+     EQL , A  ,LA(O),LG(E),LC(I), U  ,             D  ,RS(T),RG(N),RA(S), M  ,MINS,
+  //|----+----+-----+-----+-----+----|           |----+-----+-----+-----+----+----|
+     ESC ,SCLN,  X  ,  C  ,  V  , Z  ,             H  ,  J  ,  K  ,  L  , B  ,SLSH,
+  //`----+----+-----+-----+-----+----+----| |----+----+-----+-----+-----+----+----'
+                           TMB1 ,TMB2,TMB3,  TMB4,TMB5,TMB6
+  //                      `-----+----+----' `----+----+-----'
   ),
 
   [_LOWER] = LAYOUT_kc(
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         ,    , 2  , 3  , 4  , 5  ,             6  , 7  , 8  , 9  ,    ,    ,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         , 1  ,EXLM, AT ,HASH,DLR ,            PERC,CIRC,AMPR,ASTR, 0  ,    ,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         ,    , LT ,LCBR,LPRN,LBRC,            RBRC,RPRN,RCBR, GT ,    ,    ,
-  //`----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
-                             ,    ,    ,      ,TMB7,TMB8
-  //                    `----+----+----' `----+----+----'
+  //|----+----+------+------+------+----|           |----+------+------+-------+----+----|
+         ,    , LCBR , LBRC , LPRN ,    ,                , RPRN , RBRC , RCBR  ,    ,    ,
+  //|----+----+------+------+------+----|           |----+------+------+-------+----+----|
+      F1 , F2 ,LA(F3),LG(F4),LC(F5), F6 ,             F7 ,RS(F8),RG(F9),RA(F10),F11 ,F12 ,
+  //|----+----+------+------+------+----|           |----+------+------+-------+----+----|
+     PSCR,    , HOME , PGDN , PGUP ,END ,            LEFT, DOWN ,  UP  , RGHT  ,    ,    ,
+  //`----+----+------+------+------+----+----| |----+----+------+------+-------+----+----'
+                                   ,    , NO ,  MAC ,TMB7,
+  //                         `-----+----+----' `----+----+-----'
   ),
 
   [_RAISE] = LAYOUT_kc(
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         , F1 , F2 , F3 , F4 , F5 ,             F6 , F7 , F8 , F9 ,F10 ,    ,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         ,F11 ,F12 ,PSCR,SLCK,PAUS,                ,HOME,PGDN,PGUP,END ,    ,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,                ,LEFT,DOWN, UP ,RGHT,    ,
-  //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
-                         TMB9,    ,    ,      ,    ,
-  //                    `----+----+----' `----+----+----'
-  ),
-
-  [_ADJUST] = LAYOUT_kc(
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         ,    ,    ,   ,EXTOFF,   ,                ,EXTON,   ,    ,    ,    ,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         ,    ,    ,QWER,WIN ,RST ,            RTOG,MAC ,EDJP,    ,    ,    ,
-  //|----+----+----+----+----+----|           |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,                ,    ,    ,    ,    ,    ,
-  //`----+----+----+----+----+----+----| |----+----+----+----+----+----+----'
-                             ,    ,    ,      ,    ,
-  //                    `----+----+----' `----+----+----'
+  //|----+----+-----+-----+-----+----|           |----+-----+-----+-----+----+----|
+         ,    ,EXLM , AT  ,HASH ,DLR ,            PERC,CIRC ,AMPR ,ASTR ,    ,    ,
+  //|----+----+-----+-----+-----+----|           |----+-----+-----+-----+----+----|
+         , 1  ,LA(2),LG(3),LC(4), 5  ,             6  ,RS(7),RG(8),RA(9), 0  ,    ,
+  //|----+----+-----+-----+-----+----|           |----+-----+-----+-----+----+----|
+     PSCR,    ,HOME ,PGDN ,PGUP ,END ,            LEFT,DOWN , UP  ,RGHT ,    ,    ,
+  //`----+----+-----+-----+-----+----+----| |----+----+-----+-----+-----+----+----'
+                                ,    ,WIN ,   NO ,    ,
+  //                      `-----+----+----' `----+----+----'
   )
 };
 
 #ifdef SSD1306OLED
 void matrix_init_keymap(void) {
   //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-  iota_gfx_init(!has_usb());   // turns on the display
+#ifdef MASTER_RIGHT
+  iota_gfx_init(has_usb()); // turns on the display
+#else
+  iota_gfx_init(!has_usb());
+#endif // MASTER_RIGHT
 }
 
 void matrix_scan_user(void) {
@@ -134,23 +82,15 @@ void matrix_scan_user(void) {
 uint32_t layer_state_set_keymap(uint32_t state) {
   rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
   switch (biton32(state)) {
-    case _EDVORAKJ1:
-    case _EDVORAKJ2:
-      // _EDVORAKJ1 & J2 are same colored
-      rgblight_sethsv_noeeprom_white();
-      break;
     case _LOWER:
       rgblight_sethsv_noeeprom_red();
       break;
     case _RAISE:
-      rgblight_sethsv_noeeprom_blue();
-      break;
-    case _ADJUST:
       rgblight_sethsv_noeeprom_green();
       break;
-    default: //  for any other layers, or the default layer
-      rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_GRADIENT + 3);
-      rgblight_sethsv_noeeprom_red();
+    default: // for any other layers, or the default layer
+      rgblight_mode(RGBLIGHT_MODE_STATIC_GRADIENT + 3);
+      rgblight_sethsv_red();
       break;
   }
   return state;

keyboards/crkbd/keymaps/edvorakjp/oled.c

@@ -21,11 +21,7 @@ const char *read_layer_state(void) {
 
   switch (biton32(layer_state)) {
     case L_BASE:
-      strcpy(layer_name, default_layer_state == 1UL<<_EDVORAK ? "EDVORAK" : "QWERTY");
-      break;
-    case _EDVORAKJ1:
-    case _EDVORAKJ2:
-      strcpy(layer_name, "JP_EXT");
+      strcpy(layer_name, "Default");
       break;
     case _RAISE:
       strcpy(layer_name, "Raise");
@@ -33,9 +29,6 @@ const char *read_layer_state(void) {
     case _LOWER:
       strcpy(layer_name, "Lower");
       break;
-    case _ADJUST:
-      strcpy(layer_name, "Adjust");
-      break;
     default:
       snprintf(layer_name, sizeof(layer_name), "Undef-%ld", layer_state);
   }
@@ -49,10 +42,7 @@ const char *read_layer_state(void) {
 
 const char *read_host_led_state(void) {
   static char led_str[24];
-  bool ext_status = get_enable_jp_extra_layer() && get_japanese_mode();
-  strcpy(led_str, ext_status ? "EXT" : "   ");
-
-  strcat(led_str, (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? " NMLK" : "     ");
+  strcpy(led_str, (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NMLK" : "    ");
   strcat(led_str, (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? " CAPS" : "    ");
   strcat(led_str, (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? " SCLK" : "     ");
   return led_str;
@@ -70,7 +60,11 @@ void iota_gfx_task_user(void) {
   struct CharacterMatrix matrix;
 
   matrix_clear(&matrix);
+#ifdef MASTER_RIGHT
+  if (!is_master) {
+#else
   if (is_master) {
+#endif // MASTER_RIGHT
     matrix_write(&matrix, read_mode_icon(!get_enable_kc_lang()));
     matrix_write(&matrix, " ");
     matrix_write(&matrix, read_layer_state());

keyboards/dozen0/config.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2019 yynmt
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -20,16 +20,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
-#define PRODUCT_ID      0x0510
-#define DEVICE_VER      0x0101
-#define MANUFACTURER    di0ib
-#define PRODUCT         MF68
-#define DESCRIPTION     Magicforce 68 BLE
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    yynmt
+#define PRODUCT         Dozen0
+#define DESCRIPTION     12 keys macropad
 
 /* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 9
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 12
 
 /*
  * Keyboard Matrix Assignments
@@ -41,17 +41,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  *
 */
-#define MATRIX_ROW_PINS { D1, D0, C6, D7, B5, B6, B7, D6 }
-#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, D2, D3 }
-#define UNUSED_PINS {B5}
+#define MATRIX_ROW_PINS { F4 }
+#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, B5, B4, E6, D7, C6, D4 }
+#define UNUSED_PINS
 
-/* COL2ROW or ROW2COL */
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
-/*
-#define BACKLIGHT_PIN B5
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 3
-*/
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
@@ -66,6 +74,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
 /*
  * Force NKRO
  *
@@ -99,6 +112,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
+/* key combination for magic key command */
+/*#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)*/
+
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -152,3 +170,58 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/dozen0/dozen0.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 yynmt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "dozen0.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/dozen0/dozen0.h

@@ -0,0 +1,34 @@
+/* Copyright 2019 yynmt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, \
+    K06, K07, K08, K09, K10, K11  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11 }, \
+}

keyboards/dozen0/info.json

@@ -0,0 +1,16 @@
+{
+  "keyboard_name": "Dozen0",
+  "url": "http://yynmt.com",
+  "maintainer": "yynmt",
+  "width": 6,
+  "height": 2,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 12,
+      "layout": [
+        {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0},
+        {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}
+      ]
+    }
+  }
+}

keyboards/dozen0/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 yynmt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/dozen0/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2019 yynmt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT(
+    LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), KC_UP, KC_DEL, KC_BSPC, \
+    KC_LCTRL, KC_LSFT, KC_LEFT, KC_DOWN, KC_RIGHT, KC_ENT \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/dozen0/keymaps/default/readme.md

@@ -0,0 +1,8 @@
+# The default keymap for Dozen0
+
+```
+ ,-------------------------------------------------.
+| Ctrl+X | Ctrl+C | Ctrl+V |  Up  | Delete | Bksp  |
+|  Ctrl  | Shift  |  Left  | Down | Right  | Enter |
+`--------------------------------------------------'
+```

keyboards/dozen0/keymaps/f12/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 yynmt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/dozen0/keymaps/f12/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2019 yynmt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT(
+    KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, \
+    KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/dozen0/readme.md

@@ -0,0 +1,15 @@
+# Dozen0
+
+![Dozen0](https://raw.githubusercontent.com/yynmt/Dozen0/master/images/main_image_mx.jpg)
+
+Dozen0 is 12 keys macropad.
+
+Keyboard Maintainer: [yynmt](https://github.com/yynmt)  
+Hardware Supported:  Dozen0 PCBs, ProMicro supported  
+Hardware Availability: links to where you can find this hardware
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dozen0:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/dozen0/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/dz60/keymaps/edulpn/README.md

@@ -0,0 +1,10 @@
+# Edulpn Tsangan Keymap for the DZ60 PCB
+
+## Additional Notes
+Tsangan 60% Keymap for DZ60 + Fn layer.
+
+### Layout
+![Edulpn Tsangan Keymap for the DZ60](https://i.imgur.com/z7HHeH7.png)
+
+## Build
+To build the default keymap, simply run `make dz60:edulpn`.

keyboards/dz60/keymaps/edulpn/keymap.c

@@ -0,0 +1,18 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT_60_tsangan_hhkb(
+		KC_GRV,		KC_1,		KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,	KC_EQL,		KC_BSLS,	KC_DEL,
+		KC_TAB,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_LBRC,	KC_RBRC,	KC_BSPC,
+		KC_CAPS,	KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,	KC_QUOT, 				KC_ENT,
+		KC_LSFT,	KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,				KC_RSFT,	MO(1),
+		KC_LCTL, 	KC_LGUI,	KC_LALT,											KC_SPC,													KC_RALT,    KC_RGUI, 	KC_RCTL
+	),
+	[1] = LAYOUT_60_tsangan_hhkb(
+		KC_ESC,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		KC_TRNS,	RESET,
+		KC_TRNS,	RGB_TOG,	RGB_MOD,	RGB_HUI,	RGB_HUD,	RGB_SAI,	RGB_SAD,	RGB_VAI,	RGB_VAD,	KC_TRNS,	KC_TRNS,	KC_UP,		KC_TRNS,	KC_DEL,
+		KC_TRNS,	KC_MPLY,	KC_MPRV,	KC_MNXT,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_LEFT,	KC_RIGHT, 				KC_TRNS,
+		KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_DOWN,				KC_TRNS,	KC_TRNS,
+		KC_TRNS, 	KC_TRNS,	KC_TRNS,											KC_TRNS,												KC_TRNS,    KC_TRNS, 	KC_TRNS
+	)
+};

keyboards/dztech/dz40rgb/bootloader_defs.h

@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800

keyboards/dztech/dz40rgb/chconf.h

@@ -0,0 +1,520 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        TRUE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/dztech/dz40rgb/config.h

@@ -0,0 +1,34 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1220
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    DZTECH
+#define PRODUCT         DZ40RGB
+#define DESCRIPTION     DZ40 ARM RGB keyboard
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+#define MATRIX_ROW_PINS { B13, B12, A2, A1 }
+#define MATRIX_COL_PINS {A6, A7, B0, B1, C15, C14, C13, B9, B8, A8, B14, B15 }
+
+/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/
+
+#define DIODE_DIRECTION COL2ROW
+
+#define DEBOUNCE 3
+#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+#define RGB_MATRIX_SKIP_FRAMES 0
+#define RGB_MATRIX_KEYPRESSES
+#define DISABLE_RGB_MATRIX_SPLASH
+#define DISABLE_RGB_MATRIX_MULTISPLASH
+#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#define DRIVER_ADDR_1 0b1010000
+#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
+
+#define DRIVER_COUNT 2
+

keyboards/dztech/dz40rgb/dz40rgb.c

@@ -0,0 +1,297 @@
+#include "dz40rgb.h"
+#include "config.h"
+#if defined (split_space)
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ *   driver
+ *   |  R location
+ *   |  |       G location
+ *   |  |       |       B location
+ *   |  |       |       | */
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+
+    {0, K_13,   J_13,   L_13},
+    {0, K_14,   J_14,   L_14},
+
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+
+    {0, H_13,   G_13,   I_13},
+    {0, H_14,   G_14,   I_14},
+
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+	
+    {0, E_13,   D_13,   F_13},
+    {0, E_14,   D_14,   F_14},
+
+    {0, B_12,   A_12,   C_12},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_7,    A_7,    C_7},
+    {0, B_6,    A_6,    C_6},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1}
+
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+
+    {{0|(11<<4)},   {20.36*11,  0}, 1},
+    {{0|(10<<4)},   {20.36*10,  0}, 1},
+    {{0|(9<<4)},    {20.36*9,  0}, 1},
+    {{0|(8<<4)},    {20.36*8,  0}, 1},
+    {{0|(7<<4)},    {20.36*7,  0}, 1},
+	{{0|(6<<4)},    { 20.36*6,  0}, 1},
+    {{0|(5<<4)},    { 20.36*5,  0}, 1},
+    {{0|(4<<4)},    { 20.36*4,  0}, 1},
+    {{0|(3<<4)},    { 20.36*3,  0}, 1},
+    {{0|(2<<4)},    { 20.36*2,  0}, 1},
+    {{0|(1<<4)},    { 20.36*1,  0}, 1},
+    {{0|(0<<4)},    { 20.36*0,  0}, 1},
+
+    {{0|(12<<4)},   {20.36*11, 21.33*0.5}, 1},
+    {{0|(13<<4)},  {20.36*0,21.33*0.5}, 1},
+
+    {{1|(11<<4)},   {20.36*11,  21.33}, 1},
+    {{1|(10<<4)},   {20.36*10,  21.33}, 0},
+    {{1|(9<<4)},    {20.36*9,  21.33}, 0},
+    {{1|(8<<4)},    {20.36*8,  21.33}, 0},
+    {{1|(7<<4)},    {20.36*7,  21.33}, 0},
+	{{1|(6<<4)},    { 20.36*6,  21.33}, 0},
+    {{1|(5<<4)},    { 20.36*5,  21.33}, 0},
+    {{1|(4<<4)},    { 20.36*4,  21.33}, 0},
+    {{1|(3<<4)},    { 20.36*3,  21.33}, 0},
+    {{1|(2<<4)},    { 20.36*2,  21.33}, 0},
+    {{1|(1<<4)},    { 20.36*1,  21.33}, 0},
+    {{1|(0<<4)},    { 20.36*0,  21.33}, 1},
+
+    {{1|(12<<4)},   {20.36*11, 21.33*1.5}, 1},
+    {{1|(13<<4)},  {20.36*0,21.33*1.5}, 1},
+
+    {{2|(11<<4)},   {20.36*11,  21.33*2}, 1},
+    {{2|(10<<4)},   {20.36*10,  21.33*2}, 0},
+    {{2|(9<<4)},    {20.36*9,  21.33*2}, 0},
+    {{2|(8<<4)},    {20.36*8,  21.33*2}, 0},
+    {{2|(7<<4)},    {20.36*7,  21.33*2}, 0},
+	{{2|(6<<4)},    { 20.36*6,  21.33*2}, 0},
+    {{2|(5<<4)},    { 20.36*5,  21.33*2}, 0},
+    {{2|(4<<4)},    { 20.36*4,  21.33*2}, 0},
+    {{2|(3<<4)},    { 20.36*3,  21.33*2}, 0},
+    {{2|(2<<4)},    { 20.36*2,  21.33*2}, 0},
+    {{2|(1<<4)},    { 20.36*1,  21.33*2}, 0},
+    {{2|(0<<4)},    { 20.36*0,  21.33*2}, 1},
+
+    {{2|(12<<4)},   {20.36*11, 21.33*2.5}, 1},
+    {{2|(13<<4)},  {20.36*0,21.33*2.5}, 1},
+
+    {{3|(11<<4)},   {20.36*11,  21.33*3}, 1},
+    {{3|(10<<4)},   {20.36*10,  21.33*3}, 1},
+    {{3|(9<<4)},    {20.36*9,  21.33*3}, 1},
+    {{3|(8<<4)},    {20.36*8,  21.33*3}, 1},
+    {{3|(7<<4)},    {20.36*7,  21.33*3}, 1},
+	{{3|(6<<4)},    { 20.36*6,  21.33*3}, 1},
+    {{3|(5<<4)},    { 20.36*5,  21.33*3}, 1},
+    {{3|(4<<4)},    { 20.36*4,  21.33*3}, 1},
+    {{3|(3<<4)},    { 20.36*3,  21.33*3}, 1},
+    {{3|(2<<4)},    { 20.36*2,  21.33*3}, 1},
+    {{3|(1<<4)},    { 20.36*1,  21.33*3}, 1},
+    {{3|(0<<4)},    { 20.36*0,  21.33*3}, 1}
+
+};
+#else
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ *   driver
+ *   |  R location
+ *   |  |       G location
+ *   |  |       |       B location
+ *   |  |       |       | */
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+
+    {0, K_13,   J_13,   L_13},
+    {0, K_14,   J_14,   L_14},
+
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+
+    {0, H_13,   G_13,   I_13},
+    {0, H_14,   G_14,   I_14},
+
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+
+    {0, E_13,   D_13,   F_13},
+    {0, E_14,   D_14,   F_14},
+
+    {0, B_12,   A_12,   C_12},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_13,   A_13,   C_13},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1}
+
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+
+    {{0|(11<<4)},   {20.36*11,  0}, 1},
+    {{0|(10<<4)},   {20.36*10,  0}, 1},
+    {{0|(9<<4)},    {20.36*9,  0}, 1},
+    {{0|(8<<4)},    {20.36*8,  0}, 1},
+    {{0|(7<<4)},    {20.36*7,  0}, 1},
+	{{0|(6<<4)},    { 20.36*6,  0}, 1},
+    {{0|(5<<4)},    { 20.36*5,  0}, 1},
+    {{0|(4<<4)},    { 20.36*4,  0}, 1},
+    {{0|(3<<4)},    { 20.36*3,  0}, 1},
+    {{0|(2<<4)},    { 20.36*2,  0}, 1},
+    {{0|(1<<4)},    { 20.36*1,  0}, 1},
+    {{0|(0<<4)},    { 20.36*0,  0}, 1},
+
+    {{0|(12<<4)},   {20.36*11, 21.33*0.5}, 1},
+    {{0|(13<<4)},  {20.36*0,21.33*0.5}, 1},
+
+    {{1|(11<<4)},   {20.36*11,  21.33}, 1},
+    {{1|(10<<4)},   {20.36*10,  21.33}, 0},
+    {{1|(9<<4)},    {20.36*9,  21.33}, 0},
+    {{1|(8<<4)},    {20.36*8,  21.33}, 0},
+    {{1|(7<<4)},    {20.36*7,  21.33}, 0},
+	{{1|(6<<4)},    { 20.36*6,  21.33}, 0},
+    {{1|(5<<4)},    { 20.36*5,  21.33}, 0},
+    {{1|(4<<4)},    { 20.36*4,  21.33}, 0},
+    {{1|(3<<4)},    { 20.36*3,  21.33}, 0},
+    {{1|(2<<4)},    { 20.36*2,  21.33}, 0},
+    {{1|(1<<4)},    { 20.36*1,  21.33}, 0},
+    {{1|(0<<4)},    { 20.36*0,  21.33}, 1},
+
+    {{1|(12<<4)},   {20.36*11, 21.33*1.5}, 1},
+    {{1|(13<<4)},  {20.36*0,21.33*1.5}, 1},
+
+    {{2|(11<<4)},   {20.36*11,  21.33*2}, 1},
+    {{2|(10<<4)},   {20.36*10,  21.33*2}, 0},
+    {{2|(9<<4)},    {20.36*9,  21.33*2}, 0},
+    {{2|(8<<4)},    {20.36*8,  21.33*2}, 0},
+    {{2|(7<<4)},    {20.36*7,  21.33*2}, 0},
+	{{2|(6<<4)},    { 20.36*6,  21.33*2}, 0},
+    {{2|(5<<4)},    { 20.36*5,  21.33*2}, 0},
+    {{2|(4<<4)},    { 20.36*4,  21.33*2}, 0},
+    {{2|(3<<4)},    { 20.36*3,  21.33*2}, 0},
+    {{2|(2<<4)},    { 20.36*2,  21.33*2}, 0},
+    {{2|(1<<4)},    { 20.36*1,  21.33*2}, 0},
+    {{2|(0<<4)},    { 20.36*0,  21.33*2}, 1},
+
+    {{2|(12<<4)},   {20.36*11, 21.33*2.5}, 1},
+    {{2|(13<<4)},  {20.36*0,21.33*2.5}, 1},
+
+    {{3|(11<<4)},   {20.36*11,  21.33*3}, 1},
+    {{3|(10<<4)},   {20.36*10,  21.33*3}, 1},
+    {{3|(9<<4)},    {20.36*9,  21.33*3}, 1},
+    {{3|(8<<4)},    {20.36*8,  21.33*3}, 1},
+    {{3|(7<<4)},    {20.36*7,  21.33*3}, 1},
+	{{3|(6<<4)},    { 20.36*5.5,  21.33*3}, 1},
+    {{3|(4<<4)},    { 20.36*4,  21.33*3}, 1},
+    {{3|(3<<4)},    { 20.36*3,  21.33*3}, 1},
+    {{3|(2<<4)},    { 20.36*2,  21.33*3}, 1},
+    {{3|(1<<4)},    { 20.36*1,  21.33*3}, 1},
+    {{3|(0<<4)},    { 20.36*0,  21.33*3}, 1}
+
+};
+#endif
+
+
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    return process_record_user(keycode, record);
+}
+
+
+void suspend_power_down_kb(void)
+{
+    rgb_matrix_set_suspend_state(true);
+}
+
+void suspend_wakeup_init_kb(void)
+{
+    rgb_matrix_set_suspend_state(false);
+}

keyboards/dztech/dz40rgb/dz40rgb.h

@@ -0,0 +1,27 @@
+#pragma once
+#include "quantum.h"
+#define LAYOUT( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	k30, k31, k32, k33, k34,    k36,   k37, k38, k39, k3a, k3b \
+) \
+{ \
+	{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+	{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+	{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+	{ k30, k31, k32, k33, k34, k36, k36, k37, k38, k39, k3a, k3b } \
+}
+
+#define LAYOUT_SPLIT( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
+) \
+{ \
+	{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+	{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+	{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+	{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
+}

keyboards/dztech/dz40rgb/halconf.h

@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI                FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/dztech/dz40rgb/keymaps/default/config.h

@@ -0,0 +1,3 @@
+#pragma once
+#define DRIVER_1_LED_TOTAL 53
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/dztech/dz40rgb/keymaps/default/keymap.c

@@ -0,0 +1,75 @@
+#include QMK_KEYBOARD_H
+extern bool g_suspend_state;
+#define _LAYER0 0
+#define _LAYER1 1
+#define _LAYER2 2
+#define _LAYER3 3
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+		[_LAYER0] = LAYOUT( /* Base */
+			    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+			    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+			    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+				RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1),            KC_SPC,  MO(2),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+			),
+		[_LAYER1] = LAYOUT( /* FN */
+			    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+			    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+			    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
+			    _______, _______, _______, _______, _______,          _______, TO(3),      KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+			),
+		[_LAYER2] = LAYOUT( /* FN2 */
+			    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+			    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+			    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+			    RGB_TOG, RGB_MOD, BL_INC,  BL_DEC, _______,           _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+		    ),
+		[_LAYER3] = LAYOUT( /* FN3 */
+			    TO(0), RESET,   DEBUG,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD,  RGB_VAI, RGB_VAD, KC_DEL ,
+			    _______, _______, _______,  _______,   _______,  _______, _______,  _______, _______, _______, _______, _______,
+			    _______, _______, _______,  _______,   _______,  _______, _______,  _______, _______, _______, _______, _______,
+			    _______, _______, _______,  _______,   _______,           _______,  _______, _______, _______, _______,  _______
+			),
+
+};
+void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
+  rgb_led led;
+  for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+    led = g_rgb_leds[i];
+    if (led.matrix_co.raw < 0xFF) {
+      if (led.modifier) {
+          rgb_matrix_set_color( i, red, green, blue );
+      }
+    }
+  }
+}
+
+void rgb_matrix_indicators_user(void) {
+	  if (!g_suspend_state) {
+	    switch (biton32(layer_state)) {
+	      case _LAYER1:
+		    rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break;
+	      case _LAYER2:
+	        rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break;
+	      case _LAYER3:
+	        rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break;
+	    							  }
+	                        }
+
+}
+
+
+
+
+
+void matrix_init_user(void) {
+  //user initialization
+}
+
+void matrix_scan_user(void) {
+  //user matrix
+}
+
+	bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	  return true;
+	}
+

keyboards/dztech/dz40rgb/keymaps/split_space/config.h

@@ -0,0 +1,5 @@
+#pragma once
+#include "../../config.h"
+#define split_space
+#define DRIVER_1_LED_TOTAL 54
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c

@@ -0,0 +1,102 @@
+#include QMK_KEYBOARD_H
+extern bool g_suspend_state;
+#define _LAYER0 0
+#define _LAYER1 1
+#define _LAYER2 2
+#define _LAYER3 3
+#define _LAYER4 4
+#define _LAYER5 5
+#define _LAYER6 6
+#define _LAYER7 7
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+		[_LAYER0] = LAYOUT_SPLIT( /* Base */
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1),   KC_SPC,  KC_SPC,  MO(2),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT),
+		[_LAYER1] = LAYOUT_SPLIT( /* FN */
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
+    _______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY),
+		[_LAYER2] = LAYOUT_SPLIT( /* LIGHT */
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY),
+		[_LAYER3] = LAYOUT_SPLIT( /* NUMPAD */
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1),   KC_SPC,  KC_SPC,  MO(2),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT),
+		[_LAYER4] = LAYOUT_SPLIT( /* MAC */
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1),   KC_SPC,  KC_SPC,  MO(2),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT),
+		[_LAYER5] = LAYOUT_SPLIT( /* NEED TO DEFINE */
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1),   KC_SPC,  KC_SPC,  MO(2),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT),
+		[_LAYER6] = LAYOUT_SPLIT( /* NEED TO DEFINE */
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1),   KC_SPC,  KC_SPC,  MO(2),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT),
+		[_LAYER7] = LAYOUT_SPLIT( /* NEED TO DEFINE */
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1),   KC_SPC,  KC_SPC,  MO(2),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT),
+		};
+
+
+
+
+void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
+  rgb_led led;
+  for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+    led = g_rgb_leds[i];
+    if (led.matrix_co.raw < 0xFF) {
+      if (led.modifier) {
+          rgb_matrix_set_color( i, red, green, blue );
+      }
+    }
+  }
+}
+
+void rgb_matrix_indicators_user(void) {
+	  if (!g_suspend_state) {
+	    switch (biton32(layer_state)) {
+	      case _LAYER1:
+		    rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break;
+	      case _LAYER2:
+	        rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break;
+	      case _LAYER4:
+	        rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break;
+	      case _LAYER5:
+	        rgb_matrix_layer_helper(0x00, 0xFF, 0xFF, false); break;
+	      case _LAYER6:
+	        rgb_matrix_layer_helper(0xFF, 0xFF, 0xFF, false); break;
+	    							  }
+	                        }
+
+}
+
+
+
+
+
+void matrix_init_user(void) {
+  //user initialization
+}
+
+void matrix_scan_user(void) {
+  //user matrix
+}
+
+	bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	  return true;
+	}
+

keyboards/dztech/dz40rgb/mcuconf.h

@@ -0,0 +1,257 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_UART4SW                       STM32_UART4SW_PCLK
+#define STM32_UART5SW                       STM32_UART5SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+#undef STM32_HSE_BYPASS
+// #error "oh no"
+// #endif
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_USE_ADC4                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC4_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC4_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  TRUE
+#define STM32_GPT_USE_TIM7                  TRUE
+#define STM32_GPT_USE_TIM8                  TRUE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* MCUCONF_H */

keyboards/dztech/dz40rgb/rules.mk

@@ -0,0 +1,57 @@
+# project specific files
+
+## chip/board settings
+#   the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F3xx
+
+# Linker script to use
+#   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F303xC
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f3xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = GENERIC_STM32_F303XC
+
+# Cortex version
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+
+USE_FPU = yes
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = lite            # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes              # Mouse keys
+EXTRAKEY_ENABLE = yes              # Audio control and System control
+CONSOLE_ENABLE = no                # Console for debug
+COMMAND_ENABLE = no                # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes            # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no                 # USB Nkey Rollover
+AUDIO_ENABLE = no
+RGB_MATRIX_ENABLE = IS31FL3733     # Use RGB matrix
+NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in66666666666666666666666666

keyboards/dztech/dz60rgb/config.h

@@ -6,7 +6,8 @@
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x1219
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    DOU
+#define MANUFACTURER    DZTECH
+
 #define PRODUCT         DZ60RGB
 #define DESCRIPTION     DZ60 ARM RGB keyboard
 #define MATRIX_ROWS 5
@@ -20,7 +21,6 @@
 #define DIODE_DIRECTION COL2ROW
 
 #define DEBOUNCE 3
-
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
 #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
 #define RGB_MATRIX_SKIP_FRAMES 0
@@ -30,7 +30,5 @@
 #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
-
 #define DRIVER_COUNT 2
-#define DRIVER_1_LED_TOTAL 63
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+

keyboards/dztech/dz60rgb/dz60rgb.c

@@ -1,4 +1,587 @@
 #include "dz60rgb.h"
+#include "config.h"
+#if defined (dzrgb60_iso)
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ *   driver
+ *   |  R location
+ *   |  |       G location
+ *   |  |       |       B location
+ *   |  |       |       | */
+    {0, K_14,   J_14,   L_14},
+    {0, K_13,   J_13,   L_13},
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+
+    {0, H_15,   G_15,   I_15},
+    {0, H_13,   G_13,   I_13},
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+
+    {0, B_14,   A_14,   C_14},
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+
+    {0, B_13,   A_13,   C_13},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_7,    A_7,    C_7},
+    {0, B_6,    A_6,    C_6},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1},
+
+    {0, B_15,   A_15,   C_15},
+    {0, E_13,   D_13,   F_13},
+    {0, B_12,   A_12,   C_12},
+    {0, E_15,   D_15,   F_15},
+    {0, B_16,   A_16,   C_16},
+    {0, E_16,   D_16,   F_16},
+    {0, H_16,   G_16,   I_16},
+    {0, K_16,   J_16,   L_16}
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+    {{0|(13<<4)},   {16*13.5,  0}, 1},
+    {{0|(12<<4)},   {16*12,  0}, 1},
+    {{0|(11<<4)},   {16*11,  0}, 1},
+    {{0|(10<<4)},   {16*10,  0}, 1},
+    {{0|(9<<4)},    {16*9,  0}, 1},
+    {{0|(8<<4)},    {16*8,  0}, 1},
+    {{0|(7<<4)},    {16*7,  0}, 1},
+	{{0|(6<<4)},    {16*6,  0}, 1},
+    {{0|(5<<4)},    {16*5,  0}, 1},
+    {{0|(4<<4)},    {16*4,  0}, 1},
+    {{0|(3<<4)},    {16*3,  0}, 1},
+    {{0|(2<<4)},    {16*2,  0}, 1},
+    {{0|(1<<4)},    {16*1,  0}, 1},
+    {{0|(0<<4)},    {16*0,  0}, 1},
+
+	{{2|(13<<4)},   {16*13.75, 24}, 1},
+    {{1|(12<<4)},   {16*12.5,  16}, 0},
+    {{1|(11<<4)},   {16*11.5,  16}, 0},
+    {{1|(10<<4)},   {16*10.5,  16}, 0},
+    {{1|(9<<4)},    { 16*9.5,  16}, 0},
+    {{1|(8<<4)},    { 16*8.5,  16}, 0},
+    {{1|(7<<4)},    { 16*7.5,  16}, 0},
+	{{1|(6<<4)},    { 16*6.5,  16}, 0},
+    {{1|(5<<4)},    { 16*5.5,  16}, 0},
+    {{1|(4<<4)},    { 16*4.5,  16}, 0},
+    {{1|(3<<4)},    { 16*3.5,  16}, 0},
+    {{1|(2<<4)},    { 16*2.5,  16}, 0},
+    {{1|(1<<4)},    { 16*1.5,  16}, 0},
+    {{1|(0<<4)},    { 16*0.25,  16}, 1},
+
+	{{1|(13<<4)},   {16*12.75,  32}, 1},
+    {{2|(11<<4)},   {16*11.75,  32}, 0},
+    {{2|(10<<4)},   {16*10.75,  32}, 0},
+    {{2|(9<<4)},    {16*9.75,  32}, 0},
+    {{2|(8<<4)},    {16*8.75,  32}, 0},
+    {{2|(7<<4)},    {16*7.75,  32}, 0},
+	{{2|(6<<4)},    { 16*6.75,  32}, 0},
+    {{2|(5<<4)},    { 16*5.75,  32}, 0},
+    {{2|(4<<4)},    { 16*4.75,  32}, 0},
+    {{2|(3<<4)},    { 16*3.75,  32}, 0},
+    {{2|(2<<4)},    { 16*2.75,  32}, 0},
+    {{2|(1<<4)},    { 16*1.75,  32}, 0},
+    {{2|(0<<4)},    { 16*0.375,  32}, 1},
+
+    {{3|(11<<4)},   {16*13.125,  48}, 1},
+    {{3|(10<<4)},   {16*11.25,  48}, 0},
+    {{3|(9<<4)},    {16*10.25,  48}, 0},
+    {{3|(8<<4)},    {16*9.25,  48}, 0},
+    {{3|(7<<4)},    {16*8.25,  48}, 0},
+	{{3|(6<<4)},    {16*7.25,  48}, 0},
+    {{3|(5<<4)},    {16*6.25,  48}, 0},
+    {{3|(4<<4)},    {16*5.25,  48}, 0},
+    {{3|(3<<4)},    {16*4.25,  48}, 0},
+    {{3|(2<<4)},    {16*3.25,  48}, 0},
+    {{3|(1<<4)},    {16*1.25,  48}, 0},
+    {{3|(0<<4)},    {16*0.625,  48}, 1},
+
+	{{4|(13<<4)},   {16*13.875,  64}, 1},
+    {{4|(11<<4)},   {16*12.625,  64}, 1},
+    {{4|(10<<4)},   {16*11.375,  64}, 1},
+    {{4|(9<<4)},    {16*10.125,  64}, 1},
+    {{4|(5<<4)},    { 16*6.375,  64}, 0},
+    {{4|(2<<4)},    { 16*2.625,  64}, 1},
+    {{4|(1<<4)},    { 16*1.375,  64}, 1},
+    {{4|(0<<4)},    { 16*0.125,  64}, 1}
+
+};
+
+
+
+#elif defined (dzrgb60_hhkb)
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ *   driver
+ *   |  R location
+ *   |  |       G location
+ *   |  |       |       B location
+ *   |  |       |       | */
+	{0, H_15,   G_15,   I_15},
+    {0, K_14,   J_14,   L_14},
+    {0, K_13,   J_13,   L_13},
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+
+    {0, H_14,   G_14,   I_14},
+    {0, H_13,   G_13,   I_13},
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+
+    {0, E_14,   D_14,   F_14},
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+
+    {0, B_14,   A_14,   C_14},
+    {0, B_13,   A_13,   C_13},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_7,    A_7,    C_7},
+    {0, B_6,    A_6,    C_6},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1},
+
+    {0, B_15,   A_15,   C_15},
+    {0, E_13,   D_13,   F_13},
+    {0, B_12,   A_12,   C_12},
+    {0, B_16,   A_16,   C_16},
+    {0, E_16,   D_16,   F_16},
+    {0, H_16,   G_16,   I_16},
+    {0, K_16,   J_16,   L_16}
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+	{{2|(12<<4)},   {16*14,  0}, 1},
+    {{0|(13<<4)},   {16*13,  0}, 1},
+    {{0|(12<<4)},   {16*12,  0}, 1},
+    {{0|(11<<4)},   {16*11,  0}, 1},
+    {{0|(10<<4)},   {16*10,  0}, 1},
+    {{0|(9<<4)},    {16*9,  0}, 1},
+    {{0|(8<<4)},    {16*8,  0}, 1},
+    {{0|(7<<4)},    {16*7,  0}, 1},
+	{{0|(6<<4)},    {16*6,  0}, 1},
+    {{0|(5<<4)},    {16*5,  0}, 1},
+    {{0|(4<<4)},    {16*4,  0}, 1},
+    {{0|(3<<4)},    {16*3,  0}, 1},
+    {{0|(2<<4)},    {16*2,  0}, 1},
+    {{0|(1<<4)},    {16*1,  0}, 1},
+    {{0|(0<<4)},    {16*0,  0}, 1},
+
+	{{1|(13<<4)},   {16*13.75, 16}, 1},
+    {{1|(12<<4)},   {16*12.5,  16}, 0},
+    {{1|(11<<4)},   {16*11.5,  16}, 0},
+    {{1|(10<<4)},   {16*10.5,  16}, 0},
+    {{1|(9<<4)},    { 16*9.5,  16}, 0},
+    {{1|(8<<4)},    { 16*8.5,  16}, 0},
+    {{1|(7<<4)},    { 16*7.5,  16}, 0},
+	{{1|(6<<4)},    { 16*6.5,  16}, 0},
+    {{1|(5<<4)},    { 16*5.5,  16}, 0},
+    {{1|(4<<4)},    { 16*4.5,  16}, 0},
+    {{1|(3<<4)},    { 16*3.5,  16}, 0},
+    {{1|(2<<4)},    { 16*2.5,  16}, 0},
+    {{1|(1<<4)},    { 16*1.5,  16}, 0},
+    {{1|(0<<4)},    { 16*0.25,  16}, 1},
+
+	{{2|(13<<4)},   {16*12.75,  32}, 1},
+    {{2|(11<<4)},   {16*11.75,  32}, 0},
+    {{2|(10<<4)},   {16*10.75,  32}, 0},
+    {{2|(9<<4)},    {16*9.75,  32}, 0},
+    {{2|(8<<4)},    {16*8.75,  32}, 0},
+    {{2|(7<<4)},    {16*7.75,  32}, 0},
+	{{2|(6<<4)},    { 16*6.75,  32}, 0},
+    {{2|(5<<4)},    { 16*5.75,  32}, 0},
+    {{2|(4<<4)},    { 16*4.75,  32}, 0},
+    {{2|(3<<4)},    { 16*3.75,  32}, 0},
+    {{2|(2<<4)},    { 16*2.75,  32}, 0},
+    {{2|(1<<4)},    { 16*1.75,  32}, 0},
+    {{2|(0<<4)},    { 16*0.375,  32}, 1},
+
+    {{3|(13<<4)},   {16*14,     48}, 1},
+    {{3|(11<<4)},   {16*12.625, 48}, 0},
+    {{3|(10<<4)},   {16*11.25,  48}, 0},
+    {{3|(9<<4)},    {16*10.25,  48}, 0},
+    {{3|(8<<4)},    {16*9.25,  48}, 0},
+    {{3|(7<<4)},    {16*8.25,  48}, 0},
+	{{3|(6<<4)},    {16*7.25,  48}, 0},
+    {{3|(5<<4)},    {16*6.25,  48}, 0},
+    {{3|(4<<4)},    {16*5.25,  48}, 0},
+    {{3|(3<<4)},    {16*4.25,  48}, 0},
+    {{3|(2<<4)},    {16*3.25,  48}, 0},
+    {{3|(1<<4)},    {16*1.25,  48}, 0},
+    {{3|(0<<4)},    {16*0.625,  48}, 1},
+
+	{{4|(13<<4)},   {16*13.625,  64}, 1},
+    {{4|(11<<4)},   {16*12.375,  64}, 1},
+    {{4|(10<<4)},   {16*11.125,  64}, 1},
+    {{4|(5<<4)},    { 16*7,      64}, 0},
+    {{4|(2<<4)},    { 16*2.875,  64}, 1},
+    {{4|(1<<4)},    { 16*1.625,  64}, 1},
+    {{4|(0<<4)},    { 16*0.375,  64}, 1}
+
+};
+#elif defined (dzrgb60_hhkb_iso)
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ *   driver
+ *   |  R location
+ *   |  |       G location
+ *   |  |       |       B location
+ *   |  |       |       | */
+	{0, H_15,   G_15,   I_15},
+    {0, K_14,   J_14,   L_14},
+    {0, K_13,   J_13,   L_13},
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+
+    {0, K_15,   J_15,   L_15},
+    {0, H_13,   G_13,   I_13},
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+
+    {0, E_15,   D_15,   F_15},
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+
+    {0, B_14,   A_14,   C_14},
+    {0, B_13,   A_13,   C_13},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_7,    A_7,    C_7},
+    {0, B_6,    A_6,    C_6},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1},
+
+    {0, B_15,   A_15,   C_15},
+    {0, E_13,   D_13,   F_13},
+    {0, B_12,   A_12,   C_12},
+    {0, B_16,   A_16,   C_16},
+    {0, E_16,   D_16,   F_16},
+    {0, H_16,   G_16,   I_16},
+    {0, K_16,   J_16,   L_16}
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+	{{2|(12<<4)},   {16*14,  0}, 1},
+    {{0|(13<<4)},   {16*13,  0}, 1},
+    {{0|(12<<4)},   {16*12,  0}, 1},
+    {{0|(11<<4)},   {16*11,  0}, 1},
+    {{0|(10<<4)},   {16*10,  0}, 1},
+    {{0|(9<<4)},    {16*9,  0}, 1},
+    {{0|(8<<4)},    {16*8,  0}, 1},
+    {{0|(7<<4)},    {16*7,  0}, 1},
+	{{0|(6<<4)},    {16*6,  0}, 1},
+    {{0|(5<<4)},    {16*5,  0}, 1},
+    {{0|(4<<4)},    {16*4,  0}, 1},
+    {{0|(3<<4)},    {16*3,  0}, 1},
+    {{0|(2<<4)},    {16*2,  0}, 1},
+    {{0|(1<<4)},    {16*1,  0}, 1},
+    {{0|(0<<4)},    {16*0,  0}, 1},
+
+	{{2|(13<<4)},   {16*13.75, 24}, 1},
+    {{1|(12<<4)},   {16*12.5,  16}, 0},
+    {{1|(11<<4)},   {16*11.5,  16}, 0},
+    {{1|(10<<4)},   {16*10.5,  16}, 0},
+    {{1|(9<<4)},    { 16*9.5,  16}, 0},
+    {{1|(8<<4)},    { 16*8.5,  16}, 0},
+    {{1|(7<<4)},    { 16*7.5,  16}, 0},
+	{{1|(6<<4)},    { 16*6.5,  16}, 0},
+    {{1|(5<<4)},    { 16*5.5,  16}, 0},
+    {{1|(4<<4)},    { 16*4.5,  16}, 0},
+    {{1|(3<<4)},    { 16*3.5,  16}, 0},
+    {{1|(2<<4)},    { 16*2.5,  16}, 0},
+    {{1|(1<<4)},    { 16*1.5,  16}, 0},
+    {{1|(0<<4)},    { 16*0.25,  16}, 1},
+
+	{{1|(13<<4)},   {16*12.75,  32}, 1},
+    {{2|(11<<4)},   {16*11.75,  32}, 0},
+    {{2|(10<<4)},   {16*10.75,  32}, 0},
+    {{2|(9<<4)},    {16*9.75,  32}, 0},
+    {{2|(8<<4)},    {16*8.75,  32}, 0},
+    {{2|(7<<4)},    {16*7.75,  32}, 0},
+	{{2|(6<<4)},    { 16*6.75,  32}, 0},
+    {{2|(5<<4)},    { 16*5.75,  32}, 0},
+    {{2|(4<<4)},    { 16*4.75,  32}, 0},
+    {{2|(3<<4)},    { 16*3.75,  32}, 0},
+    {{2|(2<<4)},    { 16*2.75,  32}, 0},
+    {{2|(1<<4)},    { 16*1.75,  32}, 0},
+    {{2|(0<<4)},    { 16*0.375,  32}, 1},
+
+    {{3|(13<<4)},   {16*14,     48}, 1},
+    {{3|(11<<4)},   {16*12.625, 48}, 0},
+    {{3|(10<<4)},   {16*11.25,  48}, 0},
+    {{3|(9<<4)},    {16*10.25,  48}, 0},
+    {{3|(8<<4)},    {16*9.25,  48}, 0},
+    {{3|(7<<4)},    {16*8.25,  48}, 0},
+	{{3|(6<<4)},    {16*7.25,  48}, 0},
+    {{3|(5<<4)},    {16*6.25,  48}, 0},
+    {{3|(4<<4)},    {16*5.25,  48}, 0},
+    {{3|(3<<4)},    {16*4.25,  48}, 0},
+    {{3|(2<<4)},    {16*3.25,  48}, 0},
+    {{3|(1<<4)},    {16*1.25,  48}, 0},
+    {{3|(0<<4)},    {16*0.625,  48}, 1},
+
+	{{4|(13<<4)},   {16*13.625,  64}, 1},
+    {{4|(11<<4)},   {16*12.375,  64}, 1},
+    {{4|(10<<4)},   {16*11.125,  64}, 1},
+    {{4|(5<<4)},    { 16*7,      64}, 0},
+    {{4|(2<<4)},    { 16*2.875,  64}, 1},
+    {{4|(1<<4)},    { 16*1.625,  64}, 1},
+    {{4|(0<<4)},    { 16*0.375,  64}, 1}
+
+};
+#elif defined (dzrgb60_ansi)
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ *   driver
+ *   |  R location
+ *   |  |       G location
+ *   |  |       |       B location
+ *   |  |       |       | */
+    {0, K_14,   J_14,   L_14},
+    {0, K_13,   J_13,   L_13},
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+
+    {0, H_14,   G_14,   I_14},
+    {0, H_13,   G_13,   I_13},
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+
+    {0, E_14,   D_14,   F_14},
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+
+    {0, B_13,   A_13,   C_13},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_7,    A_7,    C_7},
+    {0, B_6,    A_6,    C_6},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1},
+
+    {0, B_15,   A_15,   C_15},
+    {0, E_13,   D_13,   F_13},
+    {0, B_12,   A_12,   C_12},
+    {0, E_15,   D_15,   F_15},
+    {0, B_16,   A_16,   C_16},
+    {0, E_16,   D_16,   F_16},
+    {0, H_16,   G_16,   I_16},
+    {0, K_16,   J_16,   L_16}
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+    {{0|(13<<4)},   {16*13.5,  0}, 1},
+    {{0|(12<<4)},   {16*12,  0}, 1},
+    {{0|(11<<4)},   {16*11,  0}, 1},
+    {{0|(10<<4)},   {16*10,  0}, 1},
+    {{0|(9<<4)},    {16*9,  0}, 1},
+    {{0|(8<<4)},    {16*8,  0}, 1},
+    {{0|(7<<4)},    {16*7,  0}, 1},
+	{{0|(6<<4)},    {16*6,  0}, 1},
+    {{0|(5<<4)},    {16*5,  0}, 1},
+    {{0|(4<<4)},    {16*4,  0}, 1},
+    {{0|(3<<4)},    {16*3,  0}, 1},
+    {{0|(2<<4)},    {16*2,  0}, 1},
+    {{0|(1<<4)},    {16*1,  0}, 1},
+    {{0|(0<<4)},    {16*0,  0}, 1},
+
+	{{1|(13<<4)},   {16*13.75, 16}, 1},
+    {{1|(12<<4)},   {16*12.5,  16}, 0},
+    {{1|(11<<4)},   {16*11.5,  16}, 0},
+    {{1|(10<<4)},   {16*10.5,  16}, 0},
+    {{1|(9<<4)},    { 16*9.5,  16}, 0},
+    {{1|(8<<4)},    { 16*8.5,  16}, 0},
+    {{1|(7<<4)},    { 16*7.5,  16}, 0},
+	{{1|(6<<4)},    { 16*6.5,  16}, 0},
+    {{1|(5<<4)},    { 16*5.5,  16}, 0},
+    {{1|(4<<4)},    { 16*4.5,  16}, 0},
+    {{1|(3<<4)},    { 16*3.5,  16}, 0},
+    {{1|(2<<4)},    { 16*2.5,  16}, 0},
+    {{1|(1<<4)},    { 16*1.5,  16}, 0},
+    {{1|(0<<4)},    { 16*0.25,  16}, 1},
+
+	{{2|(13<<4)},   {16*13.375,  24}, 1},
+    {{2|(11<<4)},   {16*11.75,  32}, 0},
+    {{2|(10<<4)},   {16*10.75,  32}, 0},
+    {{2|(9<<4)},    {16*9.75,  32}, 0},
+    {{2|(8<<4)},    {16*8.75,  32}, 0},
+    {{2|(7<<4)},    {16*7.75,  32}, 0},
+	{{2|(6<<4)},    { 16*6.75,  32}, 0},
+    {{2|(5<<4)},    { 16*5.75,  32}, 0},
+    {{2|(4<<4)},    { 16*4.75,  32}, 0},
+    {{2|(3<<4)},    { 16*3.75,  32}, 0},
+    {{2|(2<<4)},    { 16*2.75,  32}, 0},
+    {{2|(1<<4)},    { 16*1.75,  32}, 0},
+    {{2|(0<<4)},    { 16*0.375,  32}, 1},
+
+    {{3|(11<<4)},   {16*13.125,  48}, 1},
+    {{3|(10<<4)},   {16*11.25,  48}, 0},
+    {{3|(9<<4)},    {16*10.25,  48}, 0},
+    {{3|(8<<4)},    {16*9.25,  48}, 0},
+    {{3|(7<<4)},    {16*8.25,  48}, 0},
+	{{3|(6<<4)},    {16*7.25,  48}, 0},
+    {{3|(5<<4)},    {16*6.25,  48}, 0},
+    {{3|(4<<4)},    {16*5.25,  48}, 0},
+    {{3|(3<<4)},    {16*4.25,  48}, 0},
+    {{3|(2<<4)},    {16*3.25,  48}, 0},
+    {{3|(1<<4)},    {16*1.25,  48}, 0},
+    {{3|(0<<4)},    {16*0.625,  48}, 1},
+
+	{{4|(13<<4)},   {16*13.875,  64}, 1},
+    {{4|(11<<4)},   {16*12.625,  64}, 1},
+    {{4|(10<<4)},   {16*11.375,  64}, 1},
+    {{4|(9<<4)},    {16*10.125,  64}, 1},
+    {{4|(5<<4)},    { 16*6.375,  64}, 0},
+    {{4|(2<<4)},    { 16*2.625,  64}, 1},
+    {{4|(1<<4)},    { 16*1.375,  64}, 1},
+    {{4|(0<<4)},    { 16*0.125,  64}, 1}
+};
+#else
+
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 /* Refer to IS31 manual for these locations
  *   driver
@@ -72,7 +655,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     {0, B_16,   A_16,   C_16},
     {0, E_16,   D_16,   F_16},
     {0, H_16,   G_16,   I_16},
-    {0, K_16,   J_16,   L_16},
+    {0, K_16,   J_16,   L_16}
 };
 
 const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
@@ -142,9 +725,10 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
     {{4|(5<<4)},    { 17.23*5,  64}, 0},
     {{4|(2<<4)},    { 17.23*2,  64}, 1},
     {{4|(1<<4)},    { 17.23*1,  64}, 1},
-    {{4|(0<<4)},    { 17.23*0,  64}, 1},
+    {{4|(0<<4)},    { 17.23*0,  64}, 1}
 
 };
+#endif
 
 void matrix_init_kb(void) {
     matrix_init_user();

keyboards/dztech/dz60rgb/dz60rgb.h

@@ -1,6 +1,7 @@
 #pragma once
 #define XXX KC_NO
 #include "quantum.h"
+
 #define LAYOUT( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
@@ -14,3 +15,58 @@
     { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
     { K40, K41, K42, XXX, XXX, K45, XXX, XXX, K48, K49, K4A, K4B, XXX, K4D }  \
 }
+#define LAYOUT_ISO( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           \
+    K40, K41, K42,           K45,                K49, K4A, K4B,      K4D  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, XXX }, \
+    { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, XXX, K4D }  \
+}
+
+#define LAYOUT_HHKB( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,\
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,\
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,\
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D,\
+    K40, K41, K42,           K45,                     K4A, K4B,      K4D \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D}, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D },     \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D },     \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D },     \
+    { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, XXX, K4A, K4B, XXX, K4D }      \
+}
+
+#define LAYOUT_HHKB_ISO( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,  \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,  \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D,  \
+    K40, K41, K42,           K45,                     K4A, K4B,      K4D   \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,}, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
+    { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, XXX, K4A, K4B, XXX, K4D }  \
+}
+
+#define LAYOUT_ANSI( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           \
+    K40, K41, K42,           K45,                K49, K4A, K4B,      K4D  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, XXX }, \
+    { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, XXX, K4D }  \
+}

keyboards/dztech/dz60rgb/keymaps/ansi/config.h

@@ -0,0 +1,4 @@
+#pragma once
+#define dzrgb60_ansi
+#define DRIVER_1_LED_TOTAL 61
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c

@@ -0,0 +1,83 @@
+#include QMK_KEYBOARD_H
+extern bool g_suspend_state;
+#define _LAYER0 0
+#define _LAYER1 1
+#define _LAYER2 2
+#define _LAYER3 3
+#define _LAYER4 4
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+		[_LAYER0] = LAYOUT_ANSI( /* Base */
+			KC_GESC,         KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,    KC_9,     KC_0,      KC_MINS,  KC_EQL,  KC_BSPC,\
+		    KC_TAB,          KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,  KC_I,    KC_O,     KC_P,      KC_LBRC,  KC_RBRC, KC_BSLASH,\
+			CTL_T(KC_CAPS),  KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,  KC_K,    KC_L,     KC_SCLN,   KC_QUOT,           KC_ENT, \
+		    KC_LSFT,         KC_Z,     KC_X,     KC_C,  KC_V,  KC_B,  KC_N,    KC_M,  KC_COMM, KC_DOT,   KC_SLSH,   KC_RSFT, \
+		    KC_LCTL,         KC_LGUI,  KC_LALT,                KC_SPC,                         KC_RALT,  MO(1),     MO(2),             KC_RCTL),
+		[_LAYER1] = LAYOUT_ANSI( /* FN */
+				KC_GESC,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_DEL ,\
+			    KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_CALC,  KC_TRNS,  KC_INS,   KC_TRNS,  KC_PSCR,  KC_SLCK,  KC_PAUS,  RESET  ,\
+			    KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_HOME,  KC_PGUP,            KC_TRNS,\
+				KC_MPRV,  KC_VOLD,  KC_VOLU,  KC_MUTE,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_END,   KC_PGDOWN,KC_MNXT, \
+				KC_TRNS,  KC_TRNS,  KC_TRNS,                      TO(3),                                  KC_TRNS,  KC_TRNS,  KC_TRNS,            KC_TRNS),
+		[_LAYER2] = LAYOUT_ANSI( /* FN2 */
+				KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_DEL ,\
+				KC_TRNS,  RGB_TOG,  KC_TRNS,  RGB_HUI,  RGB_HUD,  RGB_SAI,  RGB_SAD,  RGB_VAI,  RGB_VAD,  RGB_MOD,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RESET  ,\
+				KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RGB_SPI,  RGB_SPD,  KC_TRNS,  KC_TRNS,            KC_TRNS,\
+				KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, \
+				KC_TRNS,  KC_TRNS,  KC_TRNS,                      KC_TRNS,                                KC_TRNS,  KC_TRNS,  KC_TRNS,            KC_TRNS),
+		[_LAYER3] = LAYOUT_ANSI( /* FN3 */
+				KC_GESC,       KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,    KC_8,    KC_9,   KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,\
+			    KC_TAB,        KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,    KC_I,    KC_O,   KC_P,    KC_LBRC,  KC_RBRC, KC_BSLASH,\
+				CTL_T(KC_CAPS),KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,    KC_K,    KC_L,   KC_SCLN, KC_QUOT,           KC_ENT, \
+			    KC_LSFT,       KC_Z,     KC_X,     KC_C,  KC_V,  KC_B,  KC_N,    KC_M,    KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,  \
+				KC_LCTL,       KC_LALT,  KC_LGUI,                KC_SPC,                           KC_TRNS,MO(4),   KC_RALT,           KC_RCTL),
+		[_LAYER4] = LAYOUT_ANSI( /* FN4 */
+				KC_GESC,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_DEL ,\
+			    KC_TRNS,  RGB_TOG,  KC_TRNS,  RGB_HUI,  RGB_HUD,  RGB_SAI,  RGB_SAD,  RGB_VAI,  RGB_VAD,  RGB_MOD,  KC_PSCR,  KC_SLCK,  KC_PAUS,  RESET  ,\
+			    KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RIGHT, KC_TRNS,  KC_TRNS,  KC_TRNS,  RGB_SPI,  RGB_SPD,  KC_HOME,  KC_PGUP,            KC_TRNS,\
+				KC_MPRV,  KC_VOLD,  KC_VOLU,  KC_MUTE,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_END,   KC_PGDOWN,KC_MNXT, \
+				KC_TRNS,  KC_TRNS,  KC_TRNS,                      TO(0),                                  KC_TRNS,  KC_TRNS,  KC_TRNS,            KC_TRNS),
+		};
+
+void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
+  rgb_led led;
+  for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+    led = g_rgb_leds[i];
+    if (led.matrix_co.raw < 0xFF) {
+      if (led.modifier) {
+          rgb_matrix_set_color( i, red, green, blue );
+      }
+    }
+  }
+}
+
+void rgb_matrix_indicators_user(void) {
+	  uint8_t this_led = host_keyboard_leds();
+	  if (!g_suspend_state) {
+	    switch (biton32(layer_state)) {
+	      case _LAYER1:
+		    rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break;
+	      case _LAYER2:
+	        rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break;
+	      case _LAYER3:
+	        rgb_matrix_layer_helper(0x00, 0x00, 0xFF, false); break;
+	      case _LAYER4:
+	        rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break;
+	    							  }
+	                        }
+	  if ( this_led & (1<<USB_LED_CAPS_LOCK)) {
+	        rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF);
+	  }
+
+}
+
+void matrix_init_user(void) {
+  //user initialization
+}
+
+void matrix_scan_user(void) {
+  //user matrix
+}
+
+	bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	  return true;
+	}

keyboards/dztech/dz60rgb/keymaps/default/config.h

@@ -0,0 +1,3 @@
+#pragma once
+#define DRIVER_1_LED_TOTAL 63
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/dztech/dz60rgb/keymaps/default/keymap.c

@@ -10,7 +10,7 @@ extern bool g_suspend_state;
 #define _LAYER7 7
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		[_LAYER0] = LAYOUT( /* Base */
-			KC_GESC,  KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,    KC_9,     KC_0,            KC_MINS,  KC_EQL,  KC_BSPC,\
+				RESET,  RGB_MOD,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,    KC_9,     KC_0,            KC_MINS,  KC_EQL,  KC_BSPC,\
 		    KC_TAB,   KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,  KC_I,    KC_O,     KC_P,            KC_LBRC,  KC_RBRC, KC_BSLASH,\
 			CTL_T(KC_CAPS),  KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,  KC_K,    KC_L,     KC_SCLN,         KC_QUOT,           KC_ENT, \
 		    KC_LSFT,  KC_Z,     KC_X,     KC_C,  KC_V,  KC_B,  KC_N,    KC_M,  KC_COMM, KC_DOT,   RSFT_T(KC_SLSH), KC_UP,             LT(2, KC_DEL),\