Branch point for 2020 Feb 29 Breaking Change.

.travis.yml

@@ -12,18 +12,6 @@ env:
   - MAKEFLAGS="-j3 --output-sync"
 services:
   - docker
-addons:
-  apt:
-    sources:
-      - ubuntu-toolchain-r-test
-      - llvm-toolchain-trusty-7
-    packages:
-    - pandoc
-    - diffutils
-    - dos2unix
-    - doxygen
-    - clang-format-7
-    - libstdc++-7-dev
 install:
   - npm install -g moxygen
 script:
@@ -32,6 +20,13 @@ script:
   - bash util/travis_test.sh
   - bash util/travis_build.sh
   - bash util/travis_docs.sh
+addons:
+  apt:
+    packages:
+    - pandoc
+    - diffutils
+    - dos2unix
+    - doxygen
 after_script:
   bash util/travis_compiled_push.sh
 notifications:

common_features.mk

@@ -61,7 +61,7 @@ endif
 
 ifeq ($(strip $(STENO_ENABLE)), yes)
     OPT_DEFS += -DSTENO_ENABLE
-    VIRTSER_ENABLE ?= yes
+    VIRTSER_ENABLE := yes
     SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
 endif
 
@@ -102,57 +102,6 @@ ifeq ($(strip $(UNICODE_COMMON)), yes)
     SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c
 endif
 
-VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c
-EEPROM_DRIVER ?= vendor
-ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),)
-  $(error EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver)
-else
-  OPT_DEFS += -DEEPROM_ENABLE
-  ifeq ($(strip $(EEPROM_DRIVER)), custom)
-    OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_CUSTOM
-    COMMON_VPATH += $(DRIVER_PATH)/eeprom
-    SRC += eeprom_driver.c
-  else ifeq ($(strip $(EEPROM_DRIVER)), i2c)
-    OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_I2C
-    COMMON_VPATH += $(DRIVER_PATH)/eeprom
-    QUANTUM_LIB_SRC += i2c_master.c
-    SRC += eeprom_driver.c eeprom_i2c.c
-  else ifeq ($(strip $(EEPROM_DRIVER)), transient)
-    OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
-    COMMON_VPATH += $(DRIVER_PATH)/eeprom
-    SRC += eeprom_driver.c eeprom_transient.c
-  else ifeq ($(strip $(EEPROM_DRIVER)), vendor)
-    OPT_DEFS += -DEEPROM_VENDOR
-    ifeq ($(PLATFORM),AVR)
-      # Automatically provided by avr-libc, nothing required
-    else ifeq ($(PLATFORM),CHIBIOS)
-      ifeq ($(MCU_SERIES), STM32F3xx)
-        SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
-        SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
-        OPT_DEFS += -DEEPROM_EMU_STM32F303xC
-        OPT_DEFS += -DSTM32_EEPROM_ENABLE
-      else ifeq ($(MCU_SERIES), STM32F1xx)
-        SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
-        SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
-        OPT_DEFS += -DEEPROM_EMU_STM32F103xB
-        OPT_DEFS += -DSTM32_EEPROM_ENABLE
-      else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F072xB)
-        SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
-        SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
-        OPT_DEFS += -DEEPROM_EMU_STM32F072xB
-        OPT_DEFS += -DSTM32_EEPROM_ENABLE
-      else
-        # This will effectively work the same as "transient" if not supported by the chip
-        SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c
-      endif
-    else ifeq ($(PLATFORM),ARM_ATSAM)
-      SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
-    else ifeq ($(PLATFORM),TEST)
-      SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
-    endif
-  endif
-endif
-
 ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     POST_CONFIG_H += $(QUANTUM_DIR)/rgblight_post_config.h
     OPT_DEFS += -DRGBLIGHT_ENABLE
@@ -308,11 +257,13 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
     SRC += $(QUANTUM_DIR)/backlight/backlight.c
     OPT_DEFS += -DBACKLIGHT_ENABLE
 
-    ifeq ($(strip $(BACKLIGHT_DRIVER)), custom)
-        OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
-    else ifeq ($(strip $(BACKLIGHT_DRIVER)), software)
+    ifeq ($(strip $(BACKLIGHT_DRIVER)), software)
         SRC += $(QUANTUM_DIR)/backlight/backlight_soft.c
     else
+        ifeq ($(strip $(BACKLIGHT_DRIVER)), custom)
+            OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
+        endif
+
         ifeq ($(PLATFORM),AVR)
             SRC += $(QUANTUM_DIR)/backlight/backlight_avr.c
         else
@@ -329,8 +280,6 @@ ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes)
         $(error WS2812_DRIVER="$(WS2812_DRIVER)" is not a valid WS2812 driver)
     endif
 
-    OPT_DEFS += -DWS2812_DRIVER_$(strip $(shell echo $(WS2812_DRIVER) | tr '[:lower:]' '[:upper:]'))
-
     ifeq ($(strip $(WS2812_DRIVER)), bitbang)
         SRC += ws2812.c
     else
@@ -425,28 +374,12 @@ QUANTUM_SRC:= \
     $(QUANTUM_DIR)/keymap_common.c \
     $(QUANTUM_DIR)/keycode_config.c
 
-
-
-VALID_CUSTOM_MATRIX_TYPES:= yes lite no
-
-CUSTOM_MATRIX ?= no
-
+# Include the standard or split matrix code if needed
 ifneq ($(strip $(CUSTOM_MATRIX)), yes)
-    ifeq ($(filter $(CUSTOM_MATRIX),$(VALID_CUSTOM_MATRIX_TYPES)),)
-        $(error CUSTOM_MATRIX="$(CUSTOM_MATRIX)" is not a valid custom matrix type)
-    endif
-
-    # Include common stuff for all non custom matrix users
-    QUANTUM_SRC += $(QUANTUM_DIR)/matrix_common.c
-
-    # if 'lite' then skip the actual matrix implementation
-    ifneq ($(strip $(CUSTOM_MATRIX)), lite)
-        # Include the standard or split matrix code if needed
-        ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
-            QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
-        else
-            QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
-        endif
+    ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
+        QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
+    else
+        QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
     endif
 endif
 
@@ -469,15 +402,9 @@ ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
         QUANTUM_SRC += $(QUANTUM_DIR)/split_common/transport.c
         # Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called.
         # Unused functions are pruned away, which is why we can add multiple drivers here without bloat.
-        QUANTUM_LIB_SRC += i2c_master.c \
+        QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/serial.c \
+                           i2c_master.c \
                            i2c_slave.c
-
-        SERIAL_DRIVER ?= bitbang
-        ifeq ($(strip $(SERIAL_DRIVER)), bitbang)
-            QUANTUM_LIB_SRC += serial.c
-        else
-            QUANTUM_LIB_SRC += serial_$(strip $(SERIAL_DRIVER)).c
-        endif
     endif
     COMMON_VPATH += $(QUANTUM_PATH)/split_common
 endif

docs/_summary.md

@@ -104,9 +104,7 @@
   * [ADC Driver](adc_driver.md)
   * [I2C Driver](i2c_driver.md)
   * [WS2812 Driver](ws2812_driver.md)
-  * [EEPROM Driver](eeprom_driver.md)
   * [GPIO Controls](internals_gpio_control.md)
-  * [Custom Matrix](custom_matrix.md)
   * [Proton C Conversion](proton_c_conversion.md)
 
 * For a Deeper Understanding

docs/breaking_changes.md

@@ -10,16 +10,16 @@ The breaking change period is when we will merge PR's that change QMK in dangero
 
 ## When is the next Breaking Change?
 
-The next Breaking Change is scheduled for February 29, 2020.
+The next Breaking Change is scheduled for Nov 29.
 
 ### Important Dates
 
 * [x] 2019 Sep 21 - `future` is created. It will be rebased weekly.
-* [ ] 2020 Feb 1 - `future` closed to new PR's.
-* [ ] 2020 Feb 1 - Call for testers.
-* [ ] 2020 Feb 26 - `master` is locked, no PR's merged.
-* [ ] 2020 Feb 28 - Merge `future` to `master`.
-* [ ] 2020 Feb 29 - `master` is unlocked. PR's can be merged again.
+* [ ] 2019 Nov 01 - `future` closed to new PR's.
+* [ ] 2019 Nov 01 - Call for testers.
+* [ ] 2019 Nov 27 - `master` is locked, no PR's merged.
+* [ ] 2019 Nov 29 - Merge `future` to `master`.
+* [ ] 2019 Nov 30 - `master` is unlocked. PR's can be merged again.
 
 ## What changes will be included?
 

docs/coding_conventions_python.md

@@ -309,18 +309,6 @@ FIXME(username): Revisit this code when the frob feature is done.
 
 ...where username is your GitHub username.
 
-# Testing
+# Unit Tests
 
-We use a combination of Integration and Unit testing to ensure that the our code is as bug-free as possible. All the tests can be found in `lib/python/qmk/tests/`. You can run all the tests with `qmk pytest`.
-
-At the time of this writing our tests are not very comprehensive. Looking at the current tests and writing new test cases for untested situations is a great way to both familiarize yourself with the codebase and contribute to QMK.
-
-## Integration Tests
-
-Integration tests can be found in `lib/python/qmk/tests/test_cli_commands.py`. This is where CLI commands are actually run and their overall behavior is verified. We use [`subprocess`](https://docs.python.org/3.5/library/subprocess.html#module-subprocess) to launch each CLI command and a combination of checking output and returncode to determine if the right thing happened.
-
-## Unit Tests
-
-The other `test_*.py` files in `lib/python/qmk/tests/` contain unit tests. You can write tests for individual functions inside `lib/python/qmk/` here. Generally these files are named after the module, with dots replaced by underscores.
-
-At the time of this writing we do not do any mocking for our tests. If you would like to help us change this please [open an issue](https://github.com/qmk/qmk_firmware/issues/new?assignees=&labels=cli%2C+python&template=other_issues.md&title=) or [join #cli on Discord](https://discord.gg/heQPAgy) and start a conversation there.
+These are good. We should have some one day.

docs/config_options.md

@@ -143,14 +143,10 @@ If you define these options you will enable the associated feature, which may in
 * `#define IGNORE_MOD_TAP_INTERRUPT`
   * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold, by enforcing the `TAPPING_TERM` for both keys.
   * See [Mod tap interrupt](feature_advanced_keycodes.md#ignore-mod-tap-interrupt) for details
-* `#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY`
-  * enables handling for per key `IGNORE_MOD_TAP_INTERRUPT` settings
 * `#define TAPPING_FORCE_HOLD`
   * makes it possible to use a dual role key as modifier shortly after having been tapped
   * See [Hold after tap](feature_advanced_keycodes.md#tapping-force-hold)
   * Breaks any Tap Toggle functionality (`TT` or the One Shot Tap Toggle)
-* `#define TAPPING_FORCE_HOLD_PER_KEY`
-  * enables handling for per key `TAPPING_FORCE_HOLD` settings
 * `#define LEADER_TIMEOUT 300`
   * how long before the leader key times out
     * If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped.

docs/custom_matrix.md

@@ -1,108 +0,0 @@
-# Custom Matrix
-
-QMK provides a mechanism to supplement or replace the default matrix scanning routine with your own code.
-
-The reasons to use this feature include:
-
-* Extra hardware between the keyboard's switches and MCU pins
-  * I/O multiplexer
-  * Line decoder
-* Irregular switch matrix
-  * Simultaneous use of `COL2ROW` and `ROW2COL`
-
-## Prerequisites
-
-Implementing custom matrix usually involves compilation of an additional source file. It is recommended that for consistency, this file is called `matrix.c`.
-
-Add a new file to your keyboard directory:
-```text
-keyboards/<keyboard>/matrix.c
-```
-
-And to configure compilation for the new file, add this to your `rules.mk`:
-```make
-SRC += matrix.c
-```
-
-## 'lite'
-
-Provides a default implementation for various scanning functions, reducing the boilerplate code when implementing custom matrix.
-To configure it, add this to your `rules.mk`:
-
-```make
-CUSTOM_MATRIX = lite
-```
-
-And implement the following functions in a `matrix.c` file in your keyboard folder:
-
-```c
-void matrix_init_custom(void) {
-    // TODO: initialize hardware here
-}
-
-bool matrix_scan_custom(matrix_row_t current_matrix[]) {
-    bool matrix_has_changed = false;
-
-    // TODO: add matrix scanning routine here
-
-    return matrix_has_changed;
-}
-```
-
-
-## Full Replacement
-
-When more control over the scanning routine is required, you can choose to implement the full scanning routine.
-To configure it, add this to your rules.mk:
-
-```make
-CUSTOM_MATRIX = yes
-```
-
-And implement the following functions in a `matrix.c` file in your keyboard folder:
-
-```c
-matrix_row_t matrix_get_row(uint8_t row) {
-    // TODO: return the requested row data
-}
-
-void matrix_print(void) {
-    // TODO: use print() to dump the current matrix state to console
-}
-
-void matrix_init(void) {
-    // TODO: initialize hardware and global matrix state here
-
-    // Unless hardware debouncing - Init the configured debounce routine
-    debounce_init(MATRIX_ROWS);
-
-    // This *must* be called for correct keyboard behavior
-    matrix_init_quantum();
-}
-
-uint8_t matrix_scan(void) {
-    bool matrix_has_changed = false;
-
-    // TODO: add matrix scanning routine here
-
-    // Unless hardware debouncing - use the configured debounce routine
-    debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
-
-    // This *must* be called for correct keyboard behavior
-    matrix_scan_quantum();
-
-    return matrix_has_changed;
-}
-```
-
-And also provide defaults for the following callbacks:
-
-```c
-__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
-
-__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
-
-__attribute__((weak)) void matrix_init_user(void) {}
-
-__attribute__((weak)) void matrix_scan_user(void) {}
-```

docs/custom_quantum_functions.md

@@ -489,24 +489,14 @@ The `val` is the value of the data that you want to write to EEPROM.  And the `e
 
 # Custom Tapping Term
 
-By default, the tapping term and related options (such as `IGNORE_MOD_TAP_INTERRUPT`) are defined globally, and are not configurable by key.  For most users, this is perfectly fine.  But in some cases, dual function keys would be greatly improved by different timeout behaviors than `LT` keys, or because some keys may be easier to hold than others.  Instead of using custom key codes for each, this allows for per key configurable timeout behaviors.
+By default, the tapping term is defined globally, and is not configurable by key.  For most users, this is perfectly fine.  But in come cases, dual function keys would be greatly improved by different timeouts than `LT` keys, or because some keys may be easier to hold than others.  Instead of using custom key codes for each, this allows for per key configurable `TAPPING_TERM`.
 
-There are two configurable options to control per-key timeout behaviors:
-
-- `TAPPING_TERM_PER_KEY`
-- `IGNORE_MOD_TAP_INTERRUPT_PER_KEY`
-
-You need to add `#define` lines to your `config.h` for each feature you want.
-
-```
-#define TAPPING_TERM_PER_KEY
-#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
-```
+To enable this functionality, you need to add `#define TAPPING_TERM_PER_KEY` to your `config.h`, first. 
 
 
 ## Example `get_tapping_term` Implementation
 
-To change the `TAPPING_TERM` based on the keycode, you'd want to add something like the following to your `keymap.c` file:
+To change the `TAPPING TERM` based on the keycode, you'd want to add something like the following to your `keymap.c` file: 
 
 ```c
 uint16_t get_tapping_term(uint16_t keycode) {
@@ -521,21 +511,6 @@ uint16_t get_tapping_term(uint16_t keycode) {
 }
 ```
 
-## Example `get_ignore_mod_tap_interrupt` Implementation
+### `get_tapping_term` Function Documentation
 
-To change the `IGNORE_MOD_TAP_INTERRUPT` value based on the keycode, you'd want to add something like the following to your `keymap.c` file:
-
-```c
-bool get_ignore_mod_tap_interrupt(uint16_t keycode) {
-  switch (keycode) {
-    case SFT_T(KC_SPC):
-      return true;
-    default:
-      return false;
-  }
-}
-```
-
-## `get_tapping_term` / `get_ignore_mod_tap_interrupt` Function Documentation
-
-Unlike many of the other functions here, there isn't a need (or even reason) to have a quantum or keyboard level function. Only user level functions are useful here, so no need to mark them as such.
+Unlike many of the other functions here, there isn't a need (or even reason) to have a quantum or keyboard level function. Only a user level function is useful here, so no need to mark it as such.

docs/eeprom_driver.md

@@ -1,50 +0,0 @@
-# EEPROM Driver Configuration
-
-The EEPROM driver can be swapped out depending on the needs of the keyboard, or whether extra hardware is present.
-
-Driver                      | Description
---------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-`EEPROM_DRIVER = vendor`    | Uses the on-chip driver provided by the chip manufacturer. For AVR, this is provided by avr-libc. This is supported on ARM for a subset of chips -- STM32F3xx, STM32F1xx, and STM32F072xB will be emulated by writing to flash. Other chips will generally act as "transient" below.
-`EEPROM_DRIVER = i2c`       | Supports writing to I2C-based 24xx EEPROM chips. See the driver section below.
-`EEPROM_DRIVER = transient` | Fake EEPROM driver -- supports reading/writing to RAM, and will be discarded when power is lost.
-
-## Vendor Driver Configuration
-
-No configurable options are available.
-
-## I2C Driver Configuration
-
-Currently QMK supports 24xx-series chips over I2C. As such, requires a working i2c_master driver configuration. You can override the driver configuration via your config.h:
-
-`config.h` override                         | Description                                                                         | Default Value
-------------------------------------------- | ----------------------------------------------------------------------------------- | ------------------------------------
-`#define EXTERNAL_EEPROM_I2C_BASE_ADDRESS`  | Base I2C address for the EEPROM -- shifted left by 1 as per i2c_master requirements | 0b10100000
-`#define EXTERNAL_EEPROM_I2C_ADDRESS(addr)` | Calculated I2C address for the EEPROM                                               | `(EXTERNAL_EEPROM_I2C_BASE_ADDRESS)`
-`#define EXTERNAL_EEPROM_BYTE_COUNT`        | Total size of the EEPROM in bytes                                                   | 8192
-`#define EXTERNAL_EEPROM_PAGE_SIZE`         | Page size of the EEPROM in bytes, as specified in the datasheet                     | 32
-`#define EXTERNAL_EEPROM_ADDRESS_SIZE`      | The number of bytes to transmit for the memory location within the EEPROM           | 2
-`#define EXTERNAL_EEPROM_WRITE_TIME`        | Write cycle time of the EEPROM, as specified in the datasheet                       | 5
-
-Default values and extended descriptions can be found in `drivers/eeprom/eeprom_i2c.h`.
-
-Alternatively, there are pre-defined hardware configurations for available chips/modules:
-
-Module           | Equivalent `#define`            | Source
------------------|---------------------------------|------------------------------------------
-CAT24C512 EEPROM | `#define EEPROM_I2C_CAT24C512`  | <https://www.sparkfun.com/products/14764>
-RM24C512C EEPROM | `#define EEPROM_I2C_RM24C512C`  | <https://www.sparkfun.com/products/14764>
-24LC128 EEPROM   | `#define EEPROM_I2C_24LC128`    | <https://www.microchip.com/wwwproducts/en/24LC128>
-24LC256 EEPROM   | `#define EEPROM_I2C_24LC256`    | <https://www.sparkfun.com/products/525>
-MB85RC256V FRAM  | `#define EEPROM_I2C_MB85RC256V` | <https://www.adafruit.com/product/1895>
-
-?> If you find that the EEPROM is not cooperating, ensure you've correctly shifted up your EEPROM address by 1. For example, the datasheet might state the address as `0b01010000` -- the correct value of `EXTERNAL_EEPROM_I2C_BASE_ADDRESS` needs to be `0b10100000`.
-
-## Transient Driver configuration
-
-The only configurable item for the transient EEPROM driver is its size:
-
-`config.h` override             | Description                               | Default Value
-------------------------------- | ----------------------------------------- | -------------
-`#define TRANSIENT_EEPROM_SIZE` | Total size of the EEPROM storage in bytes | 64
-
-Default values and extended descriptions can be found in `drivers/eeprom/eeprom_transient.h`.

docs/feature_advanced_keycodes.md

@@ -291,25 +291,6 @@ Normally, this would send `X` (`SHIFT`+`x`). With `Ignore Mod Tap Interrupt` ena
 
 ?> If you have `Permissive Hold` enabled, as well, this will modify how both work. The regular key has the modifier added if the first key is released first or if both keys are held longer than the `TAPPING_TERM`.
 
-For more granular control of this feature, you can add the following to your `config.h`:
-
-```c
-#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
-```
-
-You can then add the following function to your keymap:
-
-```c
-bool get_ignore_mod_tap_interrupt(uint16_t keycode) {
-  switch (keycode) {
-    case SFT_T(KC_SPC):
-      return true;
-    default:
-      return false;
-  }
-}
-```
-
 ## Tapping Force Hold
 
 To enable `tapping force hold`, add the following to your `config.h`: 
@@ -334,25 +315,6 @@ With `TAPPING_FORCE_HOLD`, the second press will be interpreted as a Shift, allo
 
 !> `TAPPING_FORCE_HOLD` will break anything that uses tapping toggles (Such as the `TT` layer keycode, and the One Shot Tapping Toggle).
 
-For more granular control of this feature, you can add the following to your `config.h`:
-
-```c
-#define TAPPING_FORCE_HOLD_PER_KEY
-```
-
-You can then add the following function to your keymap:
-
-```c
-bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case LT(1, KC_BSPC):
-      return true;
-    default:
-      return false;
-  }
-}
-```
-
 ## Retro Tapping
 
 To enable `retro tapping`, add the following to your `config.h`: 

docs/feature_oled_driver.md

@@ -1,142 +1,139 @@
 # OLED Driver
 
-## Supported Hardware
+## OLED Supported Hardware
 
 OLED modules using SSD1306 or SH1106 driver ICs, communicating over I2C.
 Tested combinations:
 
-|IC       |Size  |Platform|Notes                   |
-|---------|------|--------|------------------------|
-|SSD1306  |128x32|AVR     |Primary support         |
-|SSD1306  |128x64|AVR     |Verified working        |
-|SSD1306  |128x32|Arm     |                        |
-|SH1106   |128x64|AVR     |No rotation or scrolling|
+| IC driver |   Size | Keyboard Platform | Notes                    |
+|-----------|--------|-------------------|--------------------------|
+| SSD1306   | 128x32 | AVR               | Primary support          |
+| SSD1306   | 128x64 | AVR               | Verified working         |
+| SSD1306   | 128x32 | ARM               |                          |
+| SH1106    | 128x64 | AVR               | No rotation or scrolling |
 
-Hardware configurations using Arm-based microcontrollers or different sizes of OLED modules may be compatible, but are untested.
+Hardware configurations using ARM-based microcontrollers or different sizes of OLED modules may be compatible, but are untested.
 
-!> Warning: This OLED driver currently uses the new i2c_master driver from Split Common code. If your split keyboard uses I2C to communicate between sides, this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest Split Common code to fix this. In addition, the display timeout system to reduce OLED burn-in also uses Split Common to detect keypresses, so you will need to implement custom timeout logic for non-Split Common keyboards.
+!> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses I2C to communicate between sides, this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. In addition, the display timeout system to reduce OLED burn-in also uses split common to detect keypresses, so you will need to implement custom timeout logic for non-split common keyboards.
 
 ## Usage
 
-To enable the OLED feature, there are three steps. First, when compiling your keyboard, you'll need to add the following to your `rules.mk`:
+To enable the OLED feature, there are three steps. First, when compiling your keyboard, you'll need to set `OLED_DRIVER_ENABLE=yes` in `rules.mk`, e.g.:
 
-```make
+```
 OLED_DRIVER_ENABLE = yes
 ```
 
-Then in your `keymap.c` file, implement the OLED task call. This example assumes your keymap has three layers named `_QWERTY`, `_FN` and `_ADJ`:
+This enables the feature and the `OLED_DRIVER_ENABLE` define. Then in your `keymap.c` file, you will need to implement the user task call, e.g:
 
-```c
+```C++
 #ifdef OLED_DRIVER_ENABLE
 void oled_task_user(void) {
-    // Host Keyboard Layer Status
-    oled_write_P(PSTR("Layer: "), false);
+  // Host Keyboard Layer Status
+  oled_write_P(PSTR("Layer: "), false);
+  switch (get_highest_layer(layer_state)) {
+    case _QWERTY:
+      oled_write_P(PSTR("Default\n"), false);
+      break;
+    case _FN:
+      oled_write_P(PSTR("FN\n"), false);
+      break;
+    case _ADJ:
+      oled_write_P(PSTR("ADJ\n"), false);
+      break;
+    default:
+      // Or use the write_ln shortcut over adding '\n' to the end of your string
+      oled_write_ln_P(PSTR("Undefined"), false);
+  }
 
-    switch (get_highest_layer(layer_state)) {
-        case _QWERTY:
-            oled_write_P(PSTR("Default\n"), false);
-            break;
-        case _FN:
-            oled_write_P(PSTR("FN\n"), false);
-            break;
-        case _ADJ:
-            oled_write_P(PSTR("ADJ\n"), false);
-            break;
-        default:
-            // Or use the write_ln shortcut over adding '\n' to the end of your string
-            oled_write_ln_P(PSTR("Undefined"), false);
-    }
-
-    // Host Keyboard LED Status
-    led_t led_state = host_keyboard_led_state();
-    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
-    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
-    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+  // Host Keyboard LED Status
+  uint8_t led_usb_state = host_keyboard_leds();
+  oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR("       "), false);
+  oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR("       "), false);
+  oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR("       "), false);
 }
 #endif
 ```
 
 ## Logo Example
 
-In the default font, certain ranges of characters are reserved for a QMK logo. To render this logo to the OLED screen, use the following code example:
+In the default font, ranges in the font file are reserved for a QMK Logo. To Render this logo to the oled screen, use the following code example:
 
-```c
+```C++
 static void render_logo(void) {
-    static const char PROGMEM qmk_logo[] = {
-        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94,
-        0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4,
-        0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00
-    };
+  static const char PROGMEM qmk_logo[] = {
+    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
 
-    oled_write_P(qmk_logo, false);
+  oled_write_P(qmk_logo, false);
 }
 ```
 
 ## Other Examples
 
-In split keyboards, it is very common to have two OLED displays that each render different content and are oriented or flipped differently. You can do this by switching which content to render by using the return value from `is_keyboard_master()` or `is_keyboard_left()` found in `split_util.h`, e.g:
+In split keyboards, it is very common to have two OLED displays that each render different content and oriented flipped differently. You can do this by switching which content to render by using the return from `is_keyboard_master()` or `is_keyboard_left()` found in `split_util.h`, e.g:
 
-```c
+```C++
 #ifdef OLED_DRIVER_ENABLE
 oled_rotation_t oled_init_user(oled_rotation_t rotation) {
-    if (!is_keyboard_master()) {
-        return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
-    }
-
-    return rotation;
+  if (!is_keyboard_master())
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  return rotation;
 }
 
 void oled_task_user(void) {
-    if (is_keyboard_master()) {
-        render_status();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
-    } else {
-        render_logo();  // Renders a static logo
-        oled_scroll_left();  // Turns on scrolling
-    }
+  if (is_keyboard_master()) {
+    render_status();     // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+  } else {
+    render_logo();       // Renders a statuc logo
+    oled_scroll_left();  // Turns on scrolling
+  }
 }
 #endif
 ```
 
-## Basic Configuration
 
-|Define                     |Default          |Description                                                                                                               |
-|---------------------------|-----------------|--------------------------------------------------------------------------------------------------------------------------|
-|`OLED_DISPLAY_ADDRESS`     |`0x3C`           |The i2c address of the OLED Display                                                                                       |
-|`OLED_FONT_H`              |`"glcdfont.c"`   |The font code file to use for custom fonts                                                                                |
-|`OLED_FONT_START`          |`0`              |The starting characer index for custom fonts                                                                              |
-|`OLED_FONT_END`            |`224`            |The ending characer index for custom fonts                                                                                |
-|`OLED_FONT_WIDTH`          |`6`              |The font width                                                                                                            |
-|`OLED_FONT_HEIGHT`         |`8`              |The font height (untested)                                                                                                |
-|`OLED_TIMEOUT`             |`60000`          |Turns off the OLED screen after 60000ms of keyboard inactivity. Helps reduce OLED Burn-in. Set to 0 to disable.           |
-|`OLED_SCROLL_TIMEOUT`      |`0`              |Scrolls the OLED screen after 0ms of OLED inactivity. Helps reduce OLED Burn-in. Set to 0 to disable.                     |
-|`OLED_SCROLL_TIMEOUT_RIGHT`|*Not defined*    |Scroll timeout direction is right when defined, left when undefined.                                                      |
-|`OLED_IC`                  |`OLED_IC_SSD1306`|Set to `OLED_IC_SH1106` if you're using the SH1106 OLED controller.                                                       |
-|`OLED_COLUMN_OFFSET`       |`0`              |(SH1106 only.) Shift output to the right this many pixels.<br />Useful for 128x64 displays centered on a 132x64 SH1106 IC.|
+ ## Basic Configuration
+
+| Define                     | Default           | Description                                                                                                                |
+|----------------------------|-------------------|----------------------------------------------------------------------------------------------------------------------------|
+| `OLED_DISPLAY_ADDRESS`     | `0x3C`            | The i2c address of the OLED Display                                                                                        |
+| `OLED_FONT_H`              | `"glcdfont.c"`    | The font code file to use for custom fonts                                                                                 |
+| `OLED_FONT_START`          | `0`               | The starting characer index for custom fonts                                                                               |
+| `OLED_FONT_END`            | `224`             | The ending characer index for custom fonts                                                                                 |
+| `OLED_FONT_WIDTH`          | `6`               | The font width                                                                                                             |
+| `OLED_FONT_HEIGHT`         | `8`               | The font height (untested)                                                                                                 |
+| `OLED_TIMEOUT`             | `60000`           | Turns off the OLED screen after 60000ms of keyboard inactivity. Helps reduce OLED Burn-in. Set to 0 to disable.            |
+| `OLED_SCROLL_TIMEOUT`      | `0`               | Scrolls the OLED screen after 0ms of OLED inactivity. Helps reduce OLED Burn-in. Set to 0 to disable.                      |
+| `OLED_SCROLL_TIMEOUT_RIGHT`| *Not defined*     | Scroll timeout direction is right when defined, left when undefined.                                                       |
+| `OLED_IC`                  | `OLED_IC_SSD1306` | Set to `OLED_IC_SH1106` if you're using the SH1106 OLED controller.                                                        |
+| `OLED_COLUMN_OFFSET`       | `0`               | (SH1106 only.) Shift output to the right this many pixels.<br />Useful for 128x64 displays centered on a 132x64 SH1106 IC. |
 
  ## 128x64 & Custom sized OLED Displays
 
  The default display size for this feature is 128x32 and all necessary defines are precalculated with that in mind. We have added a define, `OLED_DISPLAY_128X64`, to switch all the values to be used in a 128x64 display, as well as added a custom define, `OLED_DISPLAY_CUSTOM`, that allows you to provide the necessary values to the driver.
 
-|Define               |Default        |Description                                                                                                                             |
-|---------------------|---------------|----------------------------------------------------------------------------------------------------------------------------------------|
-|`OLED_DISPLAY_128X64`|*Not defined*  |Changes the display defines for use with 128x64 displays.                                                                               |
-|`OLED_DISPLAY_CUSTOM`|*Not defined*  |Changes the display defines for use with custom displays.<br>Requires user to implement the below defines.                              |
-|`OLED_DISPLAY_WIDTH` |`128`          |The width of the OLED display.                                                                                                          |
-|`OLED_DISPLAY_HEIGHT`|`32`           |The height of the OLED display.                                                                                                         |
-|`OLED_MATRIX_SIZE`   |`512`          |The local buffer size to allocate.<br>`(OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)`.                                                 |
-|`OLED_BLOCK_TYPE`    |`uint16_t`     |The unsigned integer type to use for dirty rendering.                                                                                   |
-|`OLED_BLOCK_COUNT`   |`16`           |The number of blocks the display is divided into for dirty rendering.<br>`(sizeof(OLED_BLOCK_TYPE) * 8)`.                               |
-|`OLED_BLOCK_SIZE`    |`32`           |The size of each block for dirty rendering<br>`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`.                                                  |
-|`OLED_COM_PINS`      |`COM_PINS_SEQ` |How the SSD1306 chip maps it's memory to display.<br>Options are `COM_PINS_SEQ`, `COM_PINS_ALT`, `COM_PINS_SEQ_LR`, & `COM_PINS_ALT_LR`.|
-|`OLED_SOURCE_MAP`    |`{ 0, ... N }` |Precalculated source array to use for mapping source buffer to target OLED memory in 90 degree rendering.                               |
-|`OLED_TARGET_MAP`    |`{ 24, ... N }`|Precalculated target array to use for mapping source buffer to target OLED memory in 90 degree rendering.                               |
+|Define                 |Default        |Description                                                      |
+|-----------------------|---------------|-----------------------------------------------------------------|
+|`OLED_DISPLAY_128X64`  |*Not defined*  |Changes the display defines for use with 128x64 displays.        |
+|`OLED_DISPLAY_CUSTOM`  |*Not defined*  |Changes the display defines for use with custom displays.<br />Requires user to implement the below defines. |
+|`OLED_DISPLAY_WIDTH`   |`128`          |The width of the OLED display.                                   |
+|`OLED_DISPLAY_HEIGHT`  |`32`           |The height of the OLED display.                                  |
+|`OLED_MATRIX_SIZE`     |`512`          |The local buffer size to allocate.<br />`(OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)`. |
+|`OLED_BLOCK_TYPE`      |`uint16_t`     |The unsigned integer type to use for dirty rendering. |
+|`OLED_BLOCK_COUNT`     |`16`           |The number of blocks the display is divided into for dirty rendering.<br />`(sizeof(OLED_BLOCK_TYPE) * 8)`. |
+|`OLED_BLOCK_SIZE`      |`32`           |The size of each block for dirty rendering<br />`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`. |
+|`OLED_COM_PINS`        |`COM_PINS_SEQ` |How the SSD1306 chip maps it's memory to display.<br />Options are `COM_PINS_SEQ`, `COM_PINS_ALT`, `COM_PINS_SEQ_LR`, & `COM_PINS_ALT_LR`. |
+|`OLED_SOURCE_MAP`      |`{ 0, ... N }` |Precalculated source array to use for mapping source buffer to target OLED memory in 90 degree rendering.         |
+|`OLED_TARGET_MAP`      |`{ 24, ... N }`|Precalculated target array to use for mapping source buffer to target OLED memory in 90 degree rendering.         |
 
 
-### 90 Degree Rotation - Technical Mumbo Jumbo
+### 90 Degree Rotation - Technical Mumbo Jumbo 
 
 !> Rotation is unsupported on the SH1106.
 
-```c
+```C
 // OLED Rotation enum values are flags
 typedef enum {
     OLED_ROTATION_0   = 0,
@@ -146,9 +143,9 @@ typedef enum {
 } oled_rotation_t;
 ```
 
-OLED displays driven by SSD1306 drivers only natively support in hardware 0 degree and 180 degree rendering. This feature is done in software and not free. Using this feature will increase the time to calculate what data to send over i2c to the OLED. If you are strapped for cycles, this can cause keycodes to not register. In testing however, the rendering time on an ATmega32U4 board only went from 2ms to 5ms and keycodes not registering was only noticed once we hit 15ms.
-
-90 degree rotation is achieved by using bitwise operations to rotate each 8 block of memory and uses two precalculated arrays to remap buffer memory to OLED memory. The memory map defines are precalculated for remap performance and are calculated based on the display height, width, and block size. For example, in the 128x32 implementation with a `uint8_t` block type, we have a 64 byte block size. This gives us eight 8 byte blocks that need to be rotated and rendered. The OLED renders horizontally two 8 byte blocks before moving down a page, e.g:
+ OLED displays driven by SSD1306 drivers only natively support in hard ware 0 degree and 180 degree rendering. This feature is done in software and not free. Using this feature will increase the time to calculate what data to send over i2c to the OLED. If you are strapped for cycles, this can cause keycodes to not register. In testing however, the rendering time on an `atmega32u4` board only went from 2ms to 5ms and keycodes not registering was only noticed once we hit 15ms. 
+ 
+ 90 Degree Rotated Rendering is achieved by using bitwise operations to rotate each 8 block of memory and uses two precalculated arrays to remap buffer memory to OLED memory. The memory map defines are precalculated for remap performance and are calculated based on the OLED Height, Width, and Block Size. For example, in the 128x32 implementation with a `uint8_t` block type, we have a 64 byte block size. This gives us eight 8 byte blocks that need to be rotated and rendered. The OLED renders horizontally two 8 byte blocks before moving down a page, e.g:
 
 |   |   |   |   |   |   |
 |---|---|---|---|---|---|
@@ -170,8 +167,8 @@ So those precalculated arrays just index the memory offsets in the order in whic
 
 ## OLED API
 
-```c
-// OLED rotation enum values are flags
+```C++
+// OLED Rotation enum values are flags
 typedef enum {
     OLED_ROTATION_0   = 0,
     OLED_ROTATION_90  = 1,
@@ -275,26 +272,26 @@ uint8_t oled_max_lines(void);
 
 !> Scrolling and rotation are unsupported on the SH1106.
 
-## SSD1306.h Driver Conversion Guide
+## SSD1306.h driver conversion guide
 
-|Old API                  |Recommended New API              |
-|-------------------------|---------------------------------|
-|`struct CharacterMatrix` |*removed - delete all references*|
-|`iota_gfx_init`          |`oled_init`                      |
-|`iota_gfx_on`            |`oled_on`                        |
-|`iota_gfx_off`           |`oled_off`                       |
-|`iota_gfx_flush`         |`oled_render`                    |
-|`iota_gfx_write_char`    |`oled_write_char`                |
-|`iota_gfx_write`         |`oled_write`                     |
-|`iota_gfx_write_P`       |`oled_write_P`                   |
-|`iota_gfx_clear_screen`  |`oled_clear`                     |
-|`matrix_clear`           |*removed - delete all references*|
-|`matrix_write_char_inner`|`oled_write_char`                |
-|`matrix_write_char`      |`oled_write_char`                |
-|`matrix_write`           |`oled_write`                     |
-|`matrix_write_ln`        |`oled_write_ln`                  |
-|`matrix_write_P`         |`oled_write_P`                   |
-|`matrix_write_ln_P`      |`oled_write_ln_P`                |
-|`matrix_render`          |`oled_render`                    |
-|`iota_gfx_task`          |`oled_task`                      |
-|`iota_gfx_task_user`     |`oled_task_user`                 |
+|Old API                    |Recommended New API                |
+|---------------------------|-----------------------------------|
+|`struct CharacterMatrix`   |*removed - delete all references*  |
+|`iota_gfx_init`            |`oled_init`                        |
+|`iota_gfx_on`              |`oled_on`                          |
+|`iota_gfx_off`             |`oled_off`                         |
+|`iota_gfx_flush`           |`oled_render`                      |
+|`iota_gfx_write_char`      |`oled_write_char`                  |
+|`iota_gfx_write`           |`oled_write`                       |
+|`iota_gfx_write_P`         |`oled_write_P`                     |
+|`iota_gfx_clear_screen`    |`oled_clear`                       |
+|`matrix_clear`             |*removed - delete all references*  |
+|`matrix_write_char_inner`  |`oled_write_char`                  |
+|`matrix_write_char`        |`oled_write_char`                  |
+|`matrix_write`             |`oled_write`                       |
+|`matrix_write_ln`          |`oled_write_ln`                    |
+|`matrix_write_P`           |`oled_write_P`                     |
+|`matrix_write_ln_P`        |`oled_write_ln_P`                  |
+|`matrix_render`            |`oled_render`                      |
+|`iota_gfx_task`            |`oled_task`                        |
+|`iota_gfx_task_user`       |`oled_task_user`                   |

docs/feature_rgb_matrix.md

@@ -199,7 +199,6 @@ enum rgb_matrix_effects {
     RGB_MATRIX_SOLID_COLOR = 1,     // Static single hue, no speed support
     RGB_MATRIX_ALPHAS_MODS,         // Static dual hue, speed is hue for secondary hue
     RGB_MATRIX_GRADIENT_UP_DOWN,    // Static gradient top to bottom, speed controls how much gradient changes
-    RGB_MATRIX_GRADIENT_LEFT_RIGHT,    // Static gradient left to right, speed controls how much gradient changes
     RGB_MATRIX_BREATHING,           // Single hue brightness cycling animation
     RGB_MATRIX_BAND_SAT,        // Single hue band fading saturation scrolling left to right
     RGB_MATRIX_BAND_VAL,        // Single hue band fading brightness scrolling left to right
@@ -380,10 +379,6 @@ These are defined in [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blo
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set
-#define RGB_MATRIX_STARTUP_HUE 0 // Sets the default hue value, if none has been set
-#define RGB_MATRIX_STARTUP_SAT 255 // Sets the default saturation value, if none has been set
-#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
-#define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set
 ```
 
 ## EEPROM storage

docs/getting_started_build_tools.md

@@ -120,12 +120,12 @@ If this is a bit complex for you, Docker might be the turnkey solution you need.
 util/docker_build.sh keyboard:keymap
 # For example: util/docker_build.sh ergodox_ez:steno
 ```
-This will compile the desired keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, all keymaps are used. Note that the parameter format is the same as when building with `make`.
+This will compile the desired keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, the `default` keymap is used. Note that the parameter format is the same as when building with `make`.
 
 You can also start the script without any parameters, in which case it will ask you to input the build parameters one by one, which you may find easier to use:
 ```bash
 util/docker_build.sh
-# Reads parameters as input (leave blank for all keyboards/keymaps)
+# Reads parameters as input (leave blank for defaults)
 ```
 
 There is also support for building _and_ flashing the keyboard straight from Docker by specifying the `target` as well:

docs/getting_started_make_guide.md

@@ -135,7 +135,7 @@ As there is no standard split communication driver for ARM-based split keyboards
 
 `CUSTOM_MATRIX`
 
-Lets you replace the default matrix scanning routine with your own code. For further details, see the [Custom Matrix page](custom_matrix.md).
+Lets you replace the default matrix scanning routine with your own code. You will need to provide your own implementations of matrix_init() and matrix_scan().
 
 `DEBOUNCE_TYPE`
 

docs/hardware_drivers.md

@@ -33,7 +33,3 @@ Support for up to 2 drivers. Each driver impliments 2 charlieplex matrices to in
 ## IS31FL3733
 
 Support for up to a single driver with room for expansion. Each driver can control 192 individual LEDs or 64 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page.
-
-## 24xx series external I2C EEPROM
-
-Support for an external I2C-based EEPROM instead of using the on-chip EEPROM. For more information on how to setup the driver see the [EEPROM Driver](eeprom_driver.md) page.

docs/he-il/quantum_keycodes.md

@@ -17,8 +17,18 @@
 |`DEBUG`        |           |Toggle debug mode                                                    |
 |`EEPROM_RESET` |`EEP_RST`  |Resets EEPROM state by reinitializing it                             |
 |`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
+|`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
+|`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LCPO`      |           |Left Control when held, `(` when tapped                              |
+|`KC_RCPC`      |           |Right Control when held, `)` when tapped                             |
+|`KC_LAPO`      |           |Left Alt when held, `(` when tapped                                  |
+|`KC_RAPC`      |           |Right Alt when held, `)` when tapped                                 |
+|`KC_SFTENT`    |           |Right Shift when held, Enter when tapped                             |
 |`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
 |`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
+|`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
+|`M(n)`         |           |Call macro `n`                                                       |
+|`MACROTAP(n)`  |           |Macro-tap `n` idk FIXME                                              |
 ```
 
 </div>

docs/ja/README.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: eae21eed7:docs/README.md
-  git diff eae21eed7 HEAD -- docs/README.md | cat
+  git diff eae21eed7 HEAD docs/README.md | cat
 -->
 
 [![現在のバージョン](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags)

docs/ja/arm_debugging.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: eae21eed7:docs/arm_debugging.md
-  git diff eae21eed7 HEAD -- docs/arm_debugging.md | cat
+  git diff eae21eed7 HEAD docs/arm_debugging.md | cat
 -->
 
 このページでは、SWD アダプタとオープンソース/フリーツールを使って ARM MCU をデバッグするためのセットアップ方法について説明します。このガイドでは、GNU MCU Eclipse IDE for C/C++ Developers および OpenOCD を必要な依存関係と一緒にインストールします。

docs/ja/cli.md

@@ -1,8 +1,8 @@
 # QMK CLI
 
 <!---
-  original document: d598f01cb:docs/cli.md
-  git diff d598f01cb HEAD -- docs/cli.md | cat
+  original document: d598f01cb:cli.md
+  git diff d598f01cb HEAD cli.md | cat
 -->
 
 このページは QMK CLI のセットアップと使用方法について説明します。

docs/ja/cli_configuration.md

@@ -1,8 +1,8 @@
 # QMK CLI 設定
 
 <!---
-  original document: d598f01cb:docs/cli_configuration.md
-  git diff d598f01cb HEAD -- docs/cli_configuration.md | cat
+  original document: d598f01cb:cli_configuration.md
+  git diff d598f01cb HEAD cli_configuration.md | cat
 -->
 
 このドキュメントは `qmk config` がどのように動作するかを説明します。

docs/ja/config_options.md

@@ -148,8 +148,6 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
 * `#define IGNORE_MOD_TAP_INTERRUPT`
    * 両方のキーに `TAPPING_TERM` を適用することで、ホールド時に他のキーに変換するキーを使ってローリングコンボ (zx) をすることができるようにします
    * 詳細は [Mod tap interrupt](ja/feature_advanced_keycodes.md#ignore-mod-tap-interrupt) を見てください
-* `#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY`
-   * キーごとの `IGNORE_MOD_TAP_INTERRUPT` 設定の処理を有効にします
 * `#define TAPPING_FORCE_HOLD`
    * タップされた直後に、デュアルロールキーを修飾子として使用できるようにします
    * [Hold after tap](ja/feature_advanced_keycodes.md#tapping-force-hold)を見てください

docs/ja/contributing.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: d47809575:docs/contributing.md
-  git diff d47809575 HEAD -- docs/contributing.md | cat
+  git diff d47809575 HEAD docs/contributing.md | cat
 -->
 
 👍🎉 まず、これを読み貢献する時間を作ってくれてありがとうございます！🎉👍

docs/ja/driver_installation_zadig.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: d598f01cb:docs/driver_installation_zadig.md
-  git diff d598f01cb HEAD -- docs/driver_installation_zadig.md | cat
+  git diff d598f01cb HEAD docs/driver_installation_zadig.md | cat
 -->
 
 QMK はホストにたいして通常の HID キーボードデバイスとして振る舞うため特別なドライバは必要ありません。しかし、Windows でのキーボードへの書き込みは、多くの場合、キーボードをリセットした時に現れるブートローダデバイスで*行います*。

docs/ja/faq.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: d598f01cb:docs/faq.md
-  git diff d598f01cb HEAD -- docs/faq.md | cat
+  git diff d598f01cb HEAD docs/faq.md | cat
 -->
 
 * [一般](ja/faq_general.md)

docs/ja/faq_debug.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: 376419a4f:docs/faq_debug.md
-  git diff 376419a4f HEAD -- docs/faq_debug.md | cat
+  git diff 376419a4f HEAD docs/faq_debug.md | cat
 -->
 
 このページは、キーボードのトラブルシューティングについての様々な一般的な質問を説明します。

docs/ja/faq_general.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: d598f01cb:docs/faq_general.md
-  git diff d598f01cb HEAD -- docs/faq_general.md | cat
+  git diff d598f01cb HEAD docs/faq_general.md | cat
 -->
 
 ## QMK とは何か？

docs/ja/faq_keymap.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: 376419a4f:docs/faq_keymap.md
-  git diff 376419a4f HEAD -- docs/faq_keymap.md | cat
+  git diff 376419a4f HEAD docs/faq_keymap.md | cat
 -->
 
 このページは人々がキーマップについてしばしば持つ疑問について説明します。まだ読んだことが無い場合には、[キーマップの概要](ja/keymap.md)を最初に読むべきです。

docs/ja/getting_started_getting_help.md

@@ -1,8 +1,8 @@
 # 助けを得る
 
 <!---
-  original document: d598f01cb:docs/getting_started_getting_help.md
-  git diff d598f01cb HEAD -- docs/getting_started_getting_help.md | cat
+  original document: d598f01cb:getting_started_getting_help.md
+  git diff d598f01cb HEAD getting_started_getting_help.md | cat
 -->
 
 QMK に関して助けを得るための多くのリソースがあります。

docs/ja/getting_started_github.md

@@ -1,8 +1,8 @@
 # QMK で Github を使う方法
 
 <!---
-  original document: d598f01cb:docs/getting_started_github.md
-  git diff d598f01cb HEAD -- docs/getting_started_github.md | cat
+  original document: d598f01cb:getting_started_github.md
+  git diff d598f01cb HEAD getting_started_github.md | cat
 -->
 
 Github は慣れていない人には少し注意が必要です - このガイドは、QMK におけるフォーク、クローン、プルリクエストのサブミットの各ステップについて説明します。

docs/ja/getting_started_introduction.md

@@ -1,8 +1,8 @@
 # はじめに
 
 <!---
-  original document: d598f01cb:docs/getting_started_introduction.md
-  git diff d598f01cb HEAD -- docs/getting_started_introduction.md | cat
+  original document: d598f01cb:getting_started_introduction.md
+  git diff d598f01cb HEAD getting_started_introduction.md | cat
 -->
 
 このページでは、QMK プロジェクトで作業するために知っておくべき基本的な情報について説明しようと思います。Unix シェルの操作に精通していることを前提としていますが、C について、または make を使ったコンパイルについて精通しているとは想定していません。

docs/ja/newbs.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs.md
-  git diff adf4acf59 HEAD -- docs/newbs.md | cat
+  git diff adf4acf59 HEAD docs/newbs.md | cat
 -->
 
 QMK は、メカニカルキーボード用の強力なオープンソースファームウェアです。

docs/ja/newbs_building_firmware_configurator.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_building_firmware_configurator.md
-  git diff ed0575fc8 HEAD -- docs/newbs_building_firmware_configurator.md | cat
+  git diff ed0575fc8 HEAD docs/newbs_building_firmware_configurator.md | cat
 -->
 
 [QMK Configurator](https://config.qmk.fm) は、QMKファームウェアの hex ファイルを生成するオンライングラフィカルユーザーインターフェイスです。

docs/ja/newbs_flashing.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_flashing.md
-  git diff ed0575fc8 HEAD -- docs/newbs_flashing.md | cat
+  git diff ed0575fc8 HEAD docs/newbs_flashing.md | cat
 -->
 
 カスタムファームウェアは出来たので、キーボードに書き込みたくなるでしょう/フラッシュしたくなるでしょう。

docs/ja/newbs_getting_started.md

@@ -2,8 +2,8 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: 161d469:docs/newbs_getting_started.md
-  git diff 161d469 HEAD -- docs/newbs_getting_started.md | cat
+  original document: docs/newbs_getting_started.md
+  git diff 161d469 HEAD docs/newbs_getting_started.md | cat
 -->
 
 キーボードにはプロセッサが入っており、それはコンピュータに入っているものと大して違わないものです。

docs/ja/newbs_git_best_practices.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs_git_best_practices.md
-  git diff adf4acf59 HEAD -- docs/newbs_git_best_practices.md | cat
+  git diff adf4acf59 HEAD docs/newbs_git_best_practices.md | cat
 -->
 
 ## または、"如何にして私は心配することをやめて Git を愛することを学んだか。"

docs/ja/newbs_git_resolving_merge_conflicts.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs_git_resolving_merge_conflicts.md
-  git diff adf4acf59 HEAD -- docs/newbs_git_resolving_merge_conflicts.md | cat
+  git diff adf4acf59 HEAD docs/newbs_git_resolving_merge_conflicts.md | cat
 -->
 
 ブランチでの作業の完了に時間がかかる場合、他の人が行った変更が、プルリクエストを開いたときにブランチに加えた変更と競合することがあります。

docs/ja/newbs_git_resynchronize_a_branch.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs_git_resynchronize_a_branch.md
-  git diff adf4acf59 HEAD -- docs/newbs_git_resynchronize_a_branch.md | cat
+  git diff adf4acf59 HEAD docs/newbs_git_resynchronize_a_branch.md | cat
 -->
 
 仮にあなたの `master` ブランチにあなたのコミットを行い、そしてあなたの QMK リポジトリの更新が必要になったとします。

docs/ja/newbs_git_using_your_master_branch.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs_git_using_your_master_branch.md
-  git diff adf4acf59 HEAD -- docs/newbs_git_using_your_master_branch.md | cat
+  git diff adf4acf59 HEAD docs/newbs_git_using_your_master_branch.md | cat
 -->
 
 QMK の開発では、何がどこで行われているかにかかわらず、`master` ブランチを最新の状態に保つことを強くお勧めします、しかし `master` ブランチには***絶対に直接コミットしないでください***。

docs/ja/newbs_learn_more_resources.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_learn_more_resources.md
-  git diff ed0575fc8 HEAD -- docs/newbs_learn_more_resources.md | cat
+  git diff ed0575fc8 HEAD docs/newbs_learn_more_resources.md | cat
 -->
 
 これらのリソースは、QMKコミュニティの新しいメンバーに、初心者向けドキュメントで提供されている情報に対する理解を深めることを目的としています。

docs/ja/newbs_testing_debugging.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_testing_debugging.md
-  git diff ed0575fc8 HEAD -- docs/newbs_testing_debugging.md | cat
+  git diff ed0575fc8 HEAD docs/newbs_testing_debugging.md | cat
 -->
 
 カスタムファームウェアをキーボードへ書き込んだら、テストする準備が整います。運が良ければ全て問題なく動作しているはずですが、もしそうでなければこのドキュメントがどこが悪いのか調べるのに役立ちます。

docs/keycodes.md

@@ -214,8 +214,18 @@ This is a reference only. Each group of keys links to the page documenting their
 |`DEBUG`        |           |Toggle debug mode                                                    |
 |`EEPROM_RESET` |`EEP_RST`  |Resets EEPROM state by reinitializing it                             |
 |`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
+|`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
+|`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LCPO`      |           |Left Control when held, `(` when tapped                              |
+|`KC_RCPC`      |           |Right Control when held, `)` when tapped                             |
+|`KC_LAPO`      |           |Left Alt when held, `(` when tapped                                  |
+|`KC_RAPC`      |           |Right Alt when held, `)` when tapped                                 |
+|`KC_SFTENT`    |           |Right Shift when held, Enter when tapped                             |
 |`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
 |`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
+|`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
+|`M(n)`         |           |Call macro `n`                                                       |
+|`MACROTAP(n)`  |           |Macro-tap `n` idk FIXME                                              |
 
 ## [Audio Keys](feature_audio.md)
 
@@ -451,18 +461,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`OSM(mod)`  |Hold `mod` for one keypress       |
 |`OSL(layer)`|Switch to `layer` for one keypress|
 
-## [Space Cadet](feature_space_cadet.md)
-
-|Key        |Description                             |
-|-----------|----------------------------------------|
-|`KC_LCPO`  |Left Control when held, `(` when tapped |
-|`KC_RCPC`  |Right Control when held, `)` when tapped|
-|`KC_LSPO`  |Left Shift when held, `(` when tapped   |
-|`KC_RSPC`  |Right Shift when held, `)` when tapped  |
-|`KC_LAPO`  |Left Alt when held, `(` when tapped     |
-|`KC_RAPC`  |Right Alt when held, `)` when tapped    |
-|`KC_SFTENT`|Right Shift when held, Enter when tapped|
-
 ## [Swap Hands](feature_swap_hands.md)
 
 |Key        |Description                                                              |

docs/quantum_keycodes.md

@@ -14,5 +14,15 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are
 |`DEBUG`        |           |Toggle debug mode                                                    |
 |`EEPROM_RESET` |`EEP_RST`  |Resets EEPROM state by reinitializing it                             |
 |`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
+|`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
+|`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LCPO`      |           |Left Control when held, `(` when tapped                              |
+|`KC_RCPC`      |           |Right Control when held, `)` when tapped                             |
+|`KC_LAPO`      |           |Left Alt when held, `(` when tapped                                  |
+|`KC_RAPC`      |           |Right Alt when held, `)` when tapped                                 |
+|`KC_SFTENT`    |           |Right Shift when held, Enter when tapped                             |
 |`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
 |`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
+|`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
+|`M(n)`         |           |Call macro `n`                                                       |
+|`MACROTAP(n)`  |           |Macro-tap `n` idk FIXME                                              |

drivers/eeprom/eeprom_custom.c-template

@@ -1,46 +0,0 @@
-/* Copyright 2019 Nick Brassel (tzarc)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <stdint.h>
-#include <string.h>
-
-#include "eeprom_driver.h"
-
-void eeprom_driver_init(void) {
-    /* Any initialisation code */
- }
-
-void eeprom_driver_erase(void) {
-    /* Wipe out the EEPROM, setting values to zero */
-}
-
-void eeprom_read_block(void *buf, const void *addr, size_t len) {
-    /*
-        Read a block of data:
-            buf: target buffer
-            addr: 0-based offset within the EEPROM
-            len: length to read
-     */
-}
-
-void eeprom_write_block(const void *buf, void *addr, size_t len) {
-    /*
-        Write a block of data:
-            buf: target buffer
-            addr: 0-based offset within the EEPROM
-            len: length to write
-     */
-}

drivers/eeprom/eeprom_driver.c

@@ -1,73 +0,0 @@
-/* Copyright 2019 Nick Brassel (tzarc)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <stdint.h>
-#include <string.h>
-
-#include "eeprom_driver.h"
-
-uint8_t eeprom_read_byte(const uint8_t *addr) {
-    uint8_t ret;
-    eeprom_read_block(&ret, addr, 1);
-    return ret;
-}
-
-uint16_t eeprom_read_word(const uint16_t *addr) {
-    uint16_t ret;
-    eeprom_read_block(&ret, addr, 2);
-    return ret;
-}
-
-uint32_t eeprom_read_dword(const uint32_t *addr) {
-    uint32_t ret;
-    eeprom_read_block(&ret, addr, 4);
-    return ret;
-}
-
-void eeprom_write_byte(uint8_t *addr, uint8_t value) { eeprom_write_block(&value, addr, 1); }
-
-void eeprom_write_word(uint16_t *addr, uint16_t value) { eeprom_write_block(&value, addr, 2); }
-
-void eeprom_write_dword(uint32_t *addr, uint32_t value) { eeprom_write_block(&value, addr, 4); }
-
-void eeprom_update_block(const void *buf, void *addr, size_t len) {
-    uint8_t read_buf[len];
-    eeprom_read_block(read_buf, addr, len);
-    if (memcmp(buf, read_buf, len) != 0) {
-        eeprom_write_block(buf, addr, len);
-    }
-}
-
-void eeprom_update_byte(uint8_t *addr, uint8_t value) {
-    uint8_t orig = eeprom_read_byte(addr);
-    if (orig != value) {
-        eeprom_write_byte(addr, value);
-    }
-}
-
-void eeprom_update_word(uint16_t *addr, uint16_t value) {
-    uint16_t orig = eeprom_read_word(addr);
-    if (orig != value) {
-        eeprom_write_word(addr, value);
-    }
-}
-
-void eeprom_update_dword(uint32_t *addr, uint32_t value) {
-    uint32_t orig = eeprom_read_dword(addr);
-    if (orig != value) {
-        eeprom_write_dword(addr, value);
-    }
-}

drivers/eeprom/eeprom_i2c.c

@@ -1,120 +0,0 @@
-/* Copyright 2019 Nick Brassel (tzarc)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <stdint.h>
-#include <string.h>
-
-/*
-    Note that the implementations of eeprom_XXXX_YYYY on AVR are normally
-    provided by avr-libc. The same functions are reimplemented below and are
-    rerouted to the external i2c equivalent.
-
-    Seemingly, as this is compiled from within QMK, the object file generated
-    during the build overrides the avr-libc implementation during the linking
-    stage.
-
-    On other platforms such as ARM, there are no provided implementations, so
-    there is nothing to override during linkage.
-*/
-
-#include "wait.h"
-#include "i2c_master.h"
-#include "eeprom.h"
-#include "eeprom_i2c.h"
-
-// #define DEBUG_EEPROM_OUTPUT
-
-#ifdef DEBUG_EEPROM_OUTPUT
-#    include "print.h"
-#endif  // DEBUG_EEPROM_OUTPUT
-
-static inline void init_i2c_if_required(void) {
-    static int done = 0;
-    if (!done) {
-        i2c_init();
-        done = 1;
-    }
-}
-
-static inline void fill_target_address(uint8_t *buffer, const void *addr) {
-    intptr_t p = (intptr_t)addr;
-    for (int i = 0; i < EXTERNAL_EEPROM_ADDRESS_SIZE; ++i) {
-        buffer[EXTERNAL_EEPROM_ADDRESS_SIZE - 1 - i] = p & 0xFF;
-        p >>= 8;
-    }
-}
-
-void eeprom_driver_init(void) {}
-
-void eeprom_driver_erase(void) {
-    uint8_t buf[EXTERNAL_EEPROM_PAGE_SIZE];
-    memset(buf, 0x00, EXTERNAL_EEPROM_PAGE_SIZE);
-    for (intptr_t addr = 0; addr < EXTERNAL_EEPROM_BYTE_COUNT; addr += EXTERNAL_EEPROM_PAGE_SIZE) {
-        eeprom_write_block(buf, (void *)addr, EXTERNAL_EEPROM_PAGE_SIZE);
-    }
-}
-
-void eeprom_read_block(void *buf, const void *addr, size_t len) {
-    uint8_t complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE];
-    fill_target_address(complete_packet, addr);
-
-    init_i2c_if_required();
-    i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE, 100);
-    i2c_receive(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), buf, len, 100);
-
-#ifdef DEBUG_EEPROM_OUTPUT
-    dprintf("[EEPROM R] 0x%04X: ", ((int)addr));
-    for (size_t i = 0; i < len; ++i) {
-        dprintf(" %02X", (int)(((uint8_t *)buf)[i]));
-    }
-    dprintf("\n");
-#endif  // DEBUG_EEPROM_OUTPUT
-}
-
-void eeprom_write_block(const void *buf, void *addr, size_t len) {
-    uint8_t  complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + EXTERNAL_EEPROM_PAGE_SIZE];
-    uint8_t *read_buf    = (uint8_t *)buf;
-    intptr_t target_addr = (intptr_t)addr;
-
-    init_i2c_if_required();
-    while (len > 0) {
-        intptr_t page_offset  = target_addr % EXTERNAL_EEPROM_PAGE_SIZE;
-        int      write_length = EXTERNAL_EEPROM_PAGE_SIZE - page_offset;
-        if (write_length > len) {
-            write_length = len;
-        }
-
-        fill_target_address(complete_packet, (const void *)target_addr);
-        for (uint8_t i = 0; i < write_length; i++) {
-            complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + i] = read_buf[i];
-        }
-
-#ifdef DEBUG_EEPROM_OUTPUT
-        dprintf("[EEPROM W] 0x%04X: ", ((int)target_addr));
-        for (uint8_t i = 0; i < write_length; i++) {
-            dprintf(" %02X", (int)(read_buf[i]));
-        }
-        dprintf("\n");
-#endif  // DEBUG_EEPROM_OUTPUT
-
-        i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE + write_length, 100);
-        wait_ms(EXTERNAL_EEPROM_WRITE_TIME);
-
-        read_buf += write_length;
-        target_addr += write_length;
-        len -= write_length;
-    }
-}

drivers/eeprom/eeprom_i2c.h

@@ -1,115 +0,0 @@
-/* Copyright 2019 Nick Brassel (tzarc)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/*
-    Default device configurations:
-
-    For the Sparkfun Qwiic I2C EEPROM module: https://www.sparkfun.com/products/14764
-        #define EEPROM_I2C_CAT24C512 // (part number 24512A)
-        #define EEPROM_I2C_RM24C512C // (part number 24512C)
-
-    For the Sparkfun I2C EEPROM chip: https://www.sparkfun.com/products/525
-        #define EEPROM_I2C_24LC256
-
-    For the Adafruit I2C FRAM chip: https://www.adafruit.com/product/1895
-        #define EEPROM_I2C_MB85RC256V
-*/
-#if defined(EEPROM_I2C_CAT24C512)
-#    define EXTERNAL_EEPROM_BYTE_COUNT 65536
-#    define EXTERNAL_EEPROM_PAGE_SIZE 128
-#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
-#    define EXTERNAL_EEPROM_WRITE_TIME 5
-#elif defined(EEPROM_I2C_RM24C512C)
-#    define EXTERNAL_EEPROM_BYTE_COUNT 65536
-#    define EXTERNAL_EEPROM_PAGE_SIZE 128
-#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
-#    define EXTERNAL_EEPROM_WRITE_TIME 3
-#elif defined(EEPROM_I2C_24LC256)
-#    define EXTERNAL_EEPROM_BYTE_COUNT 32768
-#    define EXTERNAL_EEPROM_PAGE_SIZE 64
-#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
-#    define EXTERNAL_EEPROM_WRITE_TIME 5
-#elif defined(EEPROM_I2C_24LC128)
-#    define EXTERNAL_EEPROM_BYTE_COUNT 16384
-#    define EXTERNAL_EEPROM_PAGE_SIZE 64
-#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
-#    define EXTERNAL_EEPROM_WRITE_TIME 5
-#elif defined(EEPROM_I2C_MB85RC256V)
-#    define EXTERNAL_EEPROM_BYTE_COUNT 32768
-#    define EXTERNAL_EEPROM_PAGE_SIZE 128
-#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
-#    define EXTERNAL_EEPROM_WRITE_TIME 0
-#endif
-
-/*
-    The base I2C address of the EEPROM.
-    This needs to be shifted up by 1, to match i2c_master requirements.
-*/
-#ifndef EXTERNAL_EEPROM_I2C_BASE_ADDRESS
-#    define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100000
-#endif
-
-/*
-    The calculated I2C address based on the input memory location.
-
-    For EEPROM chips that embed part of the memory location in the I2C address
-    such as AT24M02 you can use something similar to the following (ensuring the
-    result is shifted by left by 1):
-
-    #define EXTERNAL_EEPROM_I2C_ADDRESS(loc) \
-        (EXTERNAL_EEPROM_I2C_BASE_ADDRESS | ((((loc) >> 16) & 0x07) << 1))
-
-*/
-#ifndef EXTERNAL_EEPROM_I2C_ADDRESS
-#    define EXTERNAL_EEPROM_I2C_ADDRESS(loc) (EXTERNAL_EEPROM_I2C_BASE_ADDRESS)
-#endif
-
-/*
-    The total size of the EEPROM, in bytes. The EEPROM datasheet will usually
-    specify this value in kbits, and will require conversion to bytes.
-*/
-#ifndef EXTERNAL_EEPROM_BYTE_COUNT
-#    define EXTERNAL_EEPROM_BYTE_COUNT 8192
-#endif
-
-/*
-    The page size in bytes of the EEPROM, as specified in the datasheet.
-*/
-#ifndef EXTERNAL_EEPROM_PAGE_SIZE
-#    define EXTERNAL_EEPROM_PAGE_SIZE 32
-#endif
-
-/*
-    The address size in bytes of the EEPROM. For EEPROMs with <=256 bytes, this
-    will likely be 1. For EEPROMs >256 and <=65536, this will be 2. For EEPROMs
-    >65536, this will likely need to be 2 with the modified variant of
-    EXTERNAL_EEPROM_I2C_ADDRESS above.
-
-    As expected, consult the datasheet for specifics of your EEPROM.
-*/
-#ifndef EXTERNAL_EEPROM_ADDRESS_SIZE
-#    define EXTERNAL_EEPROM_ADDRESS_SIZE 2
-#endif
-
-/*
-    The write cycle time of the EEPROM in milliseconds, as specified in the
-    datasheet.
-*/
-#ifndef EXTERNAL_EEPROM_WRITE_TIME
-#    define EXTERNAL_EEPROM_WRITE_TIME 5
-#endif

drivers/eeprom/eeprom_transient.c

@@ -1,52 +0,0 @@
-/* Copyright 2019 Nick Brassel (tzarc)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <stdint.h>
-#include <string.h>
-
-#include "eeprom_driver.h"
-#include "eeprom_transient.h"
-
-__attribute__((aligned(4))) static uint8_t transientBuffer[TRANSIENT_EEPROM_SIZE] = {0};
-
-size_t clamp_length(intptr_t offset, size_t len) {
-    if (offset + len > TRANSIENT_EEPROM_SIZE) {
-        len = TRANSIENT_EEPROM_SIZE - offset;
-    }
-
-    return len;
-}
-
-void eeprom_driver_init(void) { eeprom_driver_erase(); }
-
-void eeprom_driver_erase(void) { memset(transientBuffer, 0x00, TRANSIENT_EEPROM_SIZE); }
-
-void eeprom_read_block(void *buf, const void *addr, size_t len) {
-    intptr_t offset = (intptr_t)addr;
-    memset(buf, 0x00, len);
-    len = clamp_length(offset, len);
-    if (len > 0) {
-        memcpy(buf, &transientBuffer[offset], len);
-    }
-}
-
-void eeprom_write_block(const void *buf, void *addr, size_t len) {
-    intptr_t offset = (intptr_t)addr;
-    len             = clamp_length(offset, len);
-    if (len > 0) {
-        memcpy(&transientBuffer[offset], buf, len);
-    }
-}

drivers/eeprom/eeprom_transient.h

@@ -1,25 +0,0 @@
-/* Copyright 2019 Nick Brassel (tzarc)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/*
-    The size of the transient EEPROM buffer size.
-*/
-#ifndef TRANSIENT_EEPROM_SIZE
-#    include "eeconfig.h"
-#    define TRANSIENT_EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4)  // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO
-#endif

drivers/issi/is31fl3733.c

@@ -217,7 +217,7 @@ void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
 
         // If any of the transactions fail we risk writing dirty PG0,
         // refresh page 0 just in case.
-        if (!IS31FL3733_write_pwm_buffer(addr, g_pwm_buffer[index])) {
+        if (!IS31FL3733_write_pwm_buffer(addr, g_pwm_buffer[index])){
             g_led_control_registers_update_required[index] = true;
         }
     }

keyboards/40percentclub/luddite/config.h

@@ -19,8 +19,6 @@
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
 #define UNUSED_PINS
 
-#define DIODE_DIRECTION COL2ROW
-
 /* number of backlight levels */
 #define BACKLIGHT_PIN B5
 #ifdef BACKLIGHT_PIN

keyboards/40percentclub/nano/config.h

@@ -50,6 +50,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 }
 #define UNUSED_PINS
 
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+//#define DIODE_DIRECTION CUSTOM_MATRIX
+
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS

keyboards/7skb/rev1/config.h

@@ -34,8 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B5 }
 
-#define DIODE_DIRECTION COL2ROW
-
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5
 

keyboards/abstract/ellipse/rev1/config.h

@@ -45,7 +45,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F0, B6, B5 }
 #define UNUSED_PINS { B0, D0, D1, D2, D4, D6, D7, F1, F4, F5, F6, F7 }
 
-/* COL2ROW, ROW2COL */
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN C6

keyboards/adkb96/rev1/config.h

@@ -33,8 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 }
 #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 }
 
-#define DIODE_DIRECTION COL2ROW
-
 #define SOFT_SERIAL_PIN D0
 
 /* define tapping term */

keyboards/ai03/orbit/config.h

@@ -54,7 +54,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL */
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 
 /*

keyboards/allison/allison.c

@@ -1,17 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "allison.h"

keyboards/allison/allison.h

@@ -1,44 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-/* This is a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT_all( \
-         K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,  \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K0E, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
-    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \
-    K50, K51, K52, K53,                     K58,                K5C, K5D, K5E  \
-) \
-{ \
-    { K00, K01, K02, K03, K04,   K05,   K06,   K07,   K08, K09,   K0A,   K0B,   K0C, K0D, K0E }, \
-    { K10, K11, K12, K13, K14,   K15,   K16,   K17,   K18, K19,   K1A,   K1B,   K1C, K1D, K1E }, \
-    { K20, K21, K22, K23, K24,   K25,   K26,   K27,   K28, K29,   K2A,   K2B,   K2C, K2D, K2E }, \
-    { K30, K31, K32, K33, K34,   K35,   K36,   K37,   K38, K39,   K3A,   K3B,   K3C, K3D, K3E }, \
-    { K40, K41, K42, K43, K44,   K45,   K46,   K47,   K48, K49,   K4A,   K4B,   K4C, K4D, K4E }, \
-    { K50, K51, K52, K53, KC_NO, KC_NO, KC_NO, KC_NO, K58, KC_NO, KC_NO, KC_NO, K5C, K5D, K5E }  \
-}

keyboards/allison/config.h

@@ -1,252 +0,0 @@
-/*
-Copyright 2020 Yiancar
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x8968
-#define PRODUCT_ID 0x414D
-#define DEVICE_VER 0x0001
-#define MANUFACTURER protoTypist
-#define PRODUCT Allison
-#define DESCRIPTION A custom luxurious 60 with F-row and Macro
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 15
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D2, D1, D0, B1, B2, D3}
-#define MATRIX_COL_PINS { F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, F1, F0 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-#define BACKLIGHT_PIN B7
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 4
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-//   #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP           H
-//#define MAGIC_KEY_HELP_ALT       SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER0_ALT     GRAVE
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     B
-//#define MAGIC_KEY_BOOTLOADER_ALT ESC
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
-  #define NO_ACTION_MACRO
-  #define NO_ACTION_FUNCTION
-#endif
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0

keyboards/allison/info.json

@@ -1,12 +0,0 @@
-{
-    "keyboard_name": "allison",
-    "url": "www.yiancar-designs.com",
-    "maintainer": "Yiancar",
-    "width": 16.25, 
-    "height": 6.25, 
-    "layouts": {
-        "LAYOUT_all": {
-            "layout": [{"label":"0,0", "x":1.25, "y":0}, {"label":"0,1", "x":2.5, "y":0}, {"label":"0,2", "x":3.5, "y":0}, {"label":"0,3", "x":4.5, "y":0}, {"label":"0,4", "x":5.5, "y":0}, {"label":"0,5", "x":6.75, "y":0}, {"label":"0,6", "x":7.75, "y":0}, {"label":"0,7", "x":8.75, "y":0}, {"label":"0,8", "x":9.75, "y":0}, {"label":"0,9", "x":11, "y":0}, {"label":"0,10", "x":12, "y":0}, {"label":"0,11", "x":13, "y":0}, {"label":"0,12", "x":14, "y":0}, {"label":"0,13", "x":15.25, "y":0}, {"label":"1,0", "x":0, "y":1.25}, {"label":"1,1", "x":1.25, "y":1.25}, {"label":"1,2", "x":2.25, "y":1.25}, {"label":"1,3", "x":3.25, "y":1.25}, {"label":"1,4", "x":4.25, "y":1.25}, {"label":"1,5", "x":5.25, "y":1.25}, {"label":"1,6", "x":6.25, "y":1.25}, {"label":"1,7", "x":7.25, "y":1.25}, {"label":"1,8", "x":8.25, "y":1.25}, {"label":"1,9", "x":9.25, "y":1.25}, {"label":"1,10", "x":10.25, "y":1.25}, {"label":"1,11", "x":11.25, "y":1.25}, {"label":"1,12", "x":12.25, "y":1.25}, {"label":"1,13", "x":13.25, "y":1.25}, {"label":"1,14", "x":14.25, "y":1.25}, {"label":"0,14", "x":15.25, "y":1.25}, {"label":"2,0", "x":0, "y":2.25}, {"label":"2,1", "x":1.25, "y":2.25, "w":1.5}, {"label":"2,2", "x":2.75, "y":2.25}, {"label":"2,3", "x":3.75, "y":2.25}, {"label":"2,4", "x":4.75, "y":2.25}, {"label":"2,5", "x":5.75, "y":2.25}, {"label":"2,6", "x":6.75, "y":2.25}, {"label":"2,7", "x":7.75, "y":2.25}, {"label":"2,8", "x":8.75, "y":2.25}, {"label":"2,9", "x":9.75, "y":2.25}, {"label":"2,10", "x":10.75, "y":2.25}, {"label":"2,11", "x":11.75, "y":2.25}, {"label":"2,12", "x":12.75, "y":2.25}, {"label":"2,13", "x":13.75, "y":2.25}, {"label":"2,14", "x":14.75, "y":2.25, "w":1.5}, {"label":"3,0", "x":0, "y":3.25}, {"label":"3,1", "x":1.25, "y":3.25, "w":1.75}, {"label":"3,2", "x":3, "y":3.25}, {"label":"3,3", "x":4, "y":3.25}, {"label":"3,4", "x":5, "y":3.25}, {"label":"3,5", "x":6, "y":3.25}, {"label":"3,6", "x":7, "y":3.25}, {"label":"3,7", "x":8, "y":3.25}, {"label":"3,8", "x":9, "y":3.25}, {"label":"3,9", "x":10, "y":3.25}, {"label":"3,10", "x":11, "y":3.25}, {"label":"3,11", "x":12, "y":3.25}, {"label":"3,12", "x":13, "y":3.25}, {"label":"3,13", "x":14, "y":3.25}, {"label":"3,14", "x":15, "y":3.25, "w":1.25}, {"label":"4,0", "x":0, "y":4.25}, {"label":"4,1", "x":1.25, "y":4.25, "w":1.25}, {"label":"4,2", "x":2.5, "y":4.25}, {"label":"4,3", "x":3.5, "y":4.25}, {"label":"4,4", "x":4.5, "y":4.25}, {"label":"4,5", "x":5.5, "y":4.25}, {"label":"4,6", "x":6.5, "y":4.25}, {"label":"4,7", "x":7.5, "y":4.25}, {"label":"4,8", "x":8.5, "y":4.25}, {"label":"4,9", "x":9.5, "y":4.25}, {"label":"4,10", "x":10.5, "y":4.25}, {"label":"4,11", "x":11.5, "y":4.25}, {"label":"4,12", "x":12.5, "y":4.25}, {"label":"4,13", "x":13.5, "y":4.25, "w":1.75}, {"label":"4,14", "x":15.25, "y":4.25}, {"label":"5,0", "x":0, "y":5.25}, {"label":"5,1", "x":1.25, "y":5.25, "w":1.5}, {"label":"5,2", "x":2.75, "y":5.25}, {"label":"5,3", "x":3.75, "y":5.25, "w":1.5}, {"label":"5,8", "x":5.25, "y":5.25, "w":7}, {"label":"5,12", "x":12.25, "y":5.25, "w":1.5}, {"label":"5,13", "x":13.75, "y":5.25}, {"label":"5,14", "x":14.75, "y":5.25, "w":1.5}]
-        }
-    }
-}

keyboards/allison/keymaps/default/keymap.c

@@ -1,50 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_all( /* Base */
-             KC_ESC,  KC_F1,   KC_F2,   KC_F3, KC_F4, KC_F5, KC_F6, KC_F7,  KC_F8, KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,
-    KC_HOME, KC_GRV,  KC_1,    KC_2,    KC_3,  KC_4,  KC_5,  KC_6,  KC_7,   KC_8,  KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
-    KC_PGUP, KC_TAB,  KC_Q,    KC_W,    KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,   KC_I,  KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
-    KC_PGDN, KC_CAPS, KC_A,    KC_S,    KC_D,  KC_F,  KC_G,  KC_H,  KC_J,   KC_K,  KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
-    KC_END,  KC_LSFT, KC_NUBS, KC_Z,    KC_X,  KC_C,  KC_V,  KC_B,  KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
-    KC_LGUI, KC_LCTL, KC_LGUI, KC_LALT,                             KC_SPC,                          KC_RALT, KC_APP,  KC_RCTL),
-
-    [1] = LAYOUT_all( /* FN1 */
-             RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_INC,  BL_DEC,  BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [2] = LAYOUT_all( /* Empty for dynamic keymaps */
-             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [3] = LAYOUT_all( /* Empty for dynamic keymaps */
-             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
-};

keyboards/allison/keymaps/default/readme.md

@@ -1,7 +0,0 @@
-# The default keymaps for Allison
-
-![ANSI](https://i.imgur.com/L4MpWy7.png)
-
-![ISO](https://i.imgur.com/pvb3Gd7.png)
-
-![ANSI FN1](https://i.imgur.com/pEVv5q6.png)

keyboards/allison/keymaps/via/keymap.c

@@ -1,50 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_all( /* Base */
-             KC_ESC,  KC_F1,   KC_F2,   KC_F3, KC_F4, KC_F5, KC_F6, KC_F7,  KC_F8, KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,
-    KC_HOME, KC_GRV,  KC_1,    KC_2,    KC_3,  KC_4,  KC_5,  KC_6,  KC_7,   KC_8,  KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
-    KC_PGUP, KC_TAB,  KC_Q,    KC_W,    KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,   KC_I,  KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
-    KC_PGDN, KC_CAPS, KC_A,    KC_S,    KC_D,  KC_F,  KC_G,  KC_H,  KC_J,   KC_K,  KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
-    KC_END,  KC_LSFT, KC_NUBS, KC_Z,    KC_X,  KC_C,  KC_V,  KC_B,  KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
-    KC_LGUI, KC_LCTL, KC_LGUI, KC_LALT,                             KC_SPC,                          KC_RALT, KC_APP,  KC_RCTL),
-
-    [1] = LAYOUT_all( /* FN1 */
-             RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_INC,  BL_DEC,  BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [2] = LAYOUT_all( /* Empty for dynamic keymaps */
-             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [3] = LAYOUT_all( /* Empty for dynamic keymaps */
-             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
-};

keyboards/allison/keymaps/via/readme.md

@@ -1 +0,0 @@
-# Compile with this keymap to use VIA

keyboards/allison/readme.md

@@ -1,15 +0,0 @@
-# Allison
-
-![Allison](https://i.imgur.com/tvLtu4K.jpg)
-
-A custom luxurious 60 with F-row and Macro
-
-* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)
-* Hardware Supported: ATmega32U4
-* Hardware Availability: Small production run by mrpetrov#9585 and [protoTypist](https://discord.gg/UvskpBB)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make allison:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/allison/rules.mk

@@ -1,32 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/allison_numpad/allison_numpad.h

@@ -1,61 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-/* This is a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT_ortho_6x4( \
-    K00, K01, K02, K03, \
-    K10, K11, K12, K13, \
-    K20, K21, K22, K23, \
-    K30, K31, K32, K33, \
-    K40, K41, K42, K43, \
-    K50, K51, K52, K53  \
-) \
-{ \
-    { K00, K01, K02, K03 }, \
-    { K10, K11, K12, K13 }, \
-    { K20, K21, K22, K23 }, \
-    { K30, K31, K32, K33 }, \
-    { K40, K41, K42, K43 }, \
-    { K50, K51, K52, K53 }  \
-}
-
-#define LAYOUT_numpad_6x4( \
-    K00, K01, K02, K03, \
-    K10, K11, K12, K13, \
-    K20, K21, K22,      \
-    K30, K31, K32, K33, \
-    K40, K41, K42,      \
-    K50,      K52, K53  \
-) \
-{ \
-    { K00, K01,   K02, K03   }, \
-    { K10, K11,   K12, K13   }, \
-    { K20, K21,   K22, KC_NO }, \
-    { K30, K31,   K32, K33   }, \
-    { K40, K41,   K42, KC_NO }, \
-    { K50, KC_NO, K52, K53   }  \
-}

keyboards/allison_numpad/config.h

@@ -1,252 +0,0 @@
-/*
-Copyright 2020 Yiancar
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x8968
-#define PRODUCT_ID 0x414E
-#define DEVICE_VER 0x0001
-#define MANUFACTURER protoTypist
-#define PRODUCT Allison Numpad
-#define DESCRIPTION A custom luxurious numpad to match Allison
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, C7, C6, B6, B5, B4 }
-#define MATRIX_COL_PINS { F6, F5, F1, F0 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-#define BACKLIGHT_PIN B7
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 4
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-//   #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP           H
-//#define MAGIC_KEY_HELP_ALT       SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER0_ALT     GRAVE
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     B
-//#define MAGIC_KEY_BOOTLOADER_ALT ESC
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
-  #define NO_ACTION_MACRO
-  #define NO_ACTION_FUNCTION
-#endif
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0

keyboards/allison_numpad/info.json

@@ -1,15 +0,0 @@
-{
-    "keyboard_name": "allison_numpad",
-    "url": "www.yiancar-designs.com",
-    "maintainer": "Yiancar",
-    "width": 4, 
-    "height": 6.25, 
-    "layouts": {
-        "LAYOUT_ortho_6x4": {
-            "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1, "y":0}, {"label":"0,2", "x":2, "y":0}, {"label":"0,3", "x":3, "y":0}, {"label":"1,0", "x":0, "y":1.25}, {"label":"1,1", "x":1, "y":1.25}, {"label":"1,2", "x":2, "y":1.25}, {"label":"1,3", "x":3, "y":1.25}, {"label":"2,0", "x":0, "y":2.25}, {"label":"2,1", "x":1, "y":2.25}, {"label":"2,2", "x":2, "y":2.25}, {"label":"2,3", "x":3, "y":2.25}, {"label":"3,0", "x":0, "y":3.25}, {"label":"3,1", "x":1, "y":3.25}, {"label":"3,2", "x":2, "y":3.25}, {"label":"3,3", "x":3, "y":3.25}, {"label":"4,0", "x":0, "y":4.25}, {"label":"4,1", "x":1, "y":4.25}, {"label":"4,2", "x":2, "y":4.25}, {"label":"4,3", "x":3, "y":4.25}, {"label":"5,0", "x":0, "y":5.25}, {"label":"5,1", "x":1, "y":5.25}, {"label":"5,2", "x":2, "y":5.25}, {"label":"5,3", "x":3, "y":5.25}]
-        },
-        "LAYOUT_numpad_6x4": {
-            "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1, "y":0}, {"label":"0,2", "x":2, "y":0}, {"label":"0,3", "x":3, "y":0}, {"label":"1,0", "x":0, "y":1.25}, {"label":"1,1", "x":1, "y":1.25}, {"label":"1,2", "x":2, "y":1.25}, {"label":"1,3", "x":3, "y":1.25}, {"label":"2,0", "x":0, "y":2.25}, {"label":"2,1", "x":1, "y":2.25}, {"label":"2,2", "x":2, "y":2.25}, {"label":"3,3", "x":3, "y":2.25, "h":2}, {"label":"3,0", "x":0, "y":3.25}, {"label":"3,1", "x":1, "y":3.25}, {"label":"3,2", "x":2, "y":3.25}, {"label":"4,0", "x":0, "y":4.25}, {"label":"4,1", "x":1, "y":4.25}, {"label":"4,2", "x":2, "y":4.25}, {"label":"5,3", "x":3, "y":4.25, "h":2}, {"label":"5,0", "x":0, "y":5.25, "w":2}, {"label":"5,2", "x":2, "y":5.25}]
-        }
-    }
-}

keyboards/allison_numpad/keymaps/default/keymap.c

@@ -1,50 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_ortho_6x4( /* Base */
-    KC_PSCR, KC_SLCK, KC_PAUS, TG(1),
-    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
-    KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
-    KC_P1,   KC_P2,   KC_P3,   KC_PENT,
-    KC_P0,   KC_P0,   KC_PDOT, KC_PENT),
-
-    [1] = LAYOUT_ortho_6x4( /* FN1 */
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    BL_TOGG, BL_INC,  BL_DEC,  BL_BRTG,
-    KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS,
-    KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [2] = LAYOUT_ortho_6x4( /* Empty for dynamic keymaps */
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [3] = LAYOUT_ortho_6x4( /* Empty for dynamic keymaps */
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-};

keyboards/allison_numpad/keymaps/default/readme.md

@@ -1,5 +0,0 @@
-# The default keymap for Allison Numpad
-
-![NUMPAD](https://i.imgur.com/1n2pl5p.png)
-
-![NUMPAD FN1](https://i.imgur.com/1n2pl5p.png)

keyboards/allison_numpad/keymaps/via/keymap.c

@@ -1,50 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_ortho_6x4( /* Base */
-    KC_PSCR, KC_SLCK, KC_PAUS, TG(1),
-    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
-    KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
-    KC_P1,   KC_P2,   KC_P3,   KC_PENT,
-    KC_P0,   KC_P0,   KC_PDOT, KC_PENT),
-
-    [1] = LAYOUT_ortho_6x4( /* FN1 */
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    BL_TOGG, BL_INC,  BL_DEC,  BL_BRTG,
-    KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS,
-    KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [2] = LAYOUT_ortho_6x4( /* Empty for dynamic keymaps */
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [3] = LAYOUT_ortho_6x4( /* Empty for dynamic keymaps */
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-};

keyboards/allison_numpad/keymaps/via/readme.md

@@ -1 +0,0 @@
-# Compile with this keymap to use VIA

keyboards/allison_numpad/readme.md

@@ -1,15 +0,0 @@
-# Allison Numpad
-
-![Allison Numpad](https://i.imgur.com/tvLtu4K.jpg)
-
-A custom luxurious numpad to match Allison
-
-* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)
-* Hardware Supported: ATmega32U4
-* Hardware Availability: Small production run by mrpetrov#9585 and [protoTypist](https://discord.gg/UvskpBB)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make allison_numpad:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/allison_numpad/rules.mk

@@ -1,34 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
-
-LAYOUTS = ortho_6x4 numpad_6x4

keyboards/alps64/config.h

@@ -35,8 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS {  D0, D1, D2, D3, D4, D5, D6, C2 }
 #define UNUSED_PINS
 
-#define DIODE_DIRECTION COL2ROW
-
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 

keyboards/ares/ares.c

@@ -17,18 +17,27 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "ares.h"
 
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
+#ifdef BACKLIGHT_ENABLE
+void backlight_init_ports(void) {
+	setPinOutput(D0);
+	setPinOutput(D1);
+	setPinOutput(D4);
+	setPinOutput(D6);
 }
 
-void led_init_ports(void) {
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
+void backlight_set(uint8_t level) {
+	if (level == 0) {
+		// Turn out the lights
+		writePinLow(D0);
+		writePinLow(D1);
+		writePinLow(D4);
+		writePinLow(D6);
+	} else {
+		// Turn on the lights
+		writePinHigh(D0);
+		writePinHigh(D1);
+		writePinHigh(D4);
+		writePinHigh(D6);
+	}
 }
+#endif

keyboards/ares/config.h

@@ -37,9 +37,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_PIN D4
-#define BACKLIGHT_LEVELS 3
-
+#define BACKLIGHT_LEVELS 1
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1

keyboards/ares/rules.mk

@@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
 WS2812_DRIVER = i2c
 

keyboards/at_at/660m/rules.mk

@@ -1,5 +1,39 @@
-# MCU name
-MCU = STM32F072
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p df11 -v 0483
 
 # Build Options
 #   comment out to disable the options.

keyboards/bfake/bfake.c

@@ -17,18 +17,30 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "bfake.h"
 
-void keyboard_pre_init_kb(void) {
-    led_init_ports();
-    keyboard_pre_init_user();
+void backlight_init_ports(void) {
+	setPinOutput(D0);
+	setPinOutput(D1);
+	setPinOutput(D4);
+	setPinOutput(D6);
+
+	writePinLow(D0);
+	writePinLow(D1);
+	writePinLow(D4);
+	writePinLow(D6);
 }
 
-void led_init_ports(void) {
-    setPinOutput(D1);
-}
-
-bool led_update_kb(led_t led_state) {
-    if (led_update_user(led_state)) {
-        writePin(D1, led_state.caps_lock);
-    }
-    return true;
+void backlight_set(uint8_t level) {
+	if (level == 0) {
+		// Turn out the lights
+		writePinLow(D0);
+		writePinLow(D1);
+		writePinLow(D4);
+		writePinLow(D6);
+	} else {
+		// Turn on the lights
+		writePinHigh(D0);
+		writePinHigh(D1);
+		writePinHigh(D4);
+		writePinHigh(D6);
+	}
 }

keyboards/bfake/config.h

@@ -15,7 +15,8 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#pragma once
+#ifndef BFAKE_CONFIG_H
+#define BFAKE_CONFIG_H
 
 #include "config_common.h"
 
@@ -37,9 +38,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define BACKLIGHT_PIN D4
-#define BACKLIGHT_LEVELS 3
-
+#define BACKLIGHT_LEVELS 1
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1
+
+#endif

keyboards/bfake/rules.mk

@@ -17,7 +17,7 @@ MOUSEKEY_ENABLE = yes
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
 WS2812_DRIVER = i2c
 

keyboards/blackplum/config.h

@@ -19,8 +19,6 @@
 #define MATRIX_COL_PINS { D0, D1, D2, F7, F6, F5, F4, F1 }
 #define UNUSED_PINS
 
-#define DIODE_DIRECTION COL2ROW
-
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5
 

keyboards/bm60rgb/bm60rgb.c

@@ -1,73 +0,0 @@
-/* Copyright 2020 MechMerlin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "bm60rgb.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-
-    return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-    led_set_user(usb_led);
-}
-
-led_config_t g_led_config = { {
-  {   0,   1,   2,   3,   4,   5,   6,   7,   8,   9,  10,  11,  12,  13 },
-  {  14,  15,  16,  17,  18,  19,  20,  21,  22,  23,  24,  25,  26,  27 },
-  {  28,  29,  30,  31,  32,  33,  34,  35,  36,  37,  40,  41,  42 },
-  {  NO_LED, 43,  44,  45,  46,  48,  49,  50,  51,  52,  53,  54,  55,  56 },
-  {  57,  58,  59,  NO_LED, NO_LED, NO_LED, NO_LED, 60, NO_LED,  NO_LED,  61, 62,  63,  64}
-}, {
-    // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace
-    {   0,   0 }, {  15,   0 }, {  30,   0 }, {  45,   0 }, {  60,   0 }, {  75,   0 }, {  90,   0 }, { 105,   0 }, { 120,   0 }, { 135,   0 }, { 150,   0 }, { 165,   0 }, { 180,   0 }, { 202,   0 },
-    // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ],  ,
-    {   7,  16 }, {  22,  16 }, {  37,  16 }, {  52,  16 }, {  67,  16 }, {  82,  16 }, {  97,  16 }, { 112,  16 }, { 127,  16 }, { 142,  16 }, { 157,  16 }, { 172,  16 }, { 187,  16 }, { 206,  16 }, 
-    // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter
-    {  11,  32 }, {  26,  32 }, {  41,  32 }, {  56,  32 }, {  71,  32 }, {  86,  32 }, { 101,  32 }, { 116,  32 }, { 131,  32 }, { 146,  32 }, { 161,  32 }, { 176,  32 }, { 198,  32 }, 
-    // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up,
-    {  18,  48 }, {  30,  48 }, {  45,  48 }, {  60,  48 }, {  75,  48 }, {  90,  48 }, { 105,  48 }, { 120,  48 }, { 135,  48 }, { 150,  48 }, { 165,  48 }, { 191,  48 }, { 210,  48 }, 
-    // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
-    {   3,  64 }, {  22,  64 }, {  33,  64 }, { 101,  64 }, { 135,  64 }, { 153,  64 }, { 195,  64 }, { 210,  64 }, { 225,  64 }
-}, {
-    // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace
-    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 
-    // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ],  , 
-    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 
-    // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter
-    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 
-    // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, 
-    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 
-    // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
-    1, 1, 1, 4, 1, 1, 1, 1, 1
-} };

keyboards/bm60rgb/bm60rgb.h

@@ -1,36 +0,0 @@
-/* Copyright 2020 MechMerlin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,        \
-    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
-    K20,    K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,          \
-    K31,       K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,     K3C, K3D,   \
-    K40,  K41,  K42,              K46,                K49, K4A, K4B, K4C, K4D    \
-) { \
-    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D   }, \
-    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D   }, \
-    { K20,   KC_NO, K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D   }, \
-    { KC_NO, K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D   }, \
-    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, K49,   K4A,   K4B,   K4C,   K4D   }, \
-}
-
-// generated by KBFirmware JSON to QMK Parser
-// https://noroadsleft.github.io/kbf_qmk_converter/
-

keyboards/bm60rgb/config.h

@@ -1,59 +0,0 @@
-/*
-Copyright 2020 MechMerlin
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0xEF8C
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    KP Republic
-#define PRODUCT         BM60 RGB
-#define DESCRIPTION     A 60% hotswap inswitch rgb board
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-//                         0   1   2   3   4   5   6   7   8   9   A   B   C   D
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, E6 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7 }
-
-#define DIODE_DIRECTION COL2ROW
-
-#define RGB_DI_PIN E2
-#define DRIVER_LED_TOTAL 69
-#ifdef RGB_DI_PIN
-    #define RGBLED_NUM 69
-    #define RGB_MATRIX_KEYPRESSES
-#endif
-
-// generated by KBFirmware JSON to QMK Parser
-// https://noroadsleft.github.io/kbf_qmk_converter/

keyboards/bm60rgb/info.json

@@ -1,79 +0,0 @@
-{
-    "keyboard_name": "BM60 RGB",
-    "url": "",
-    "maintainer": "qmk",
-    "width": 15,
-    "height": 5,
-    "layouts": {
-        "LAYOUT": {
-            "key_count": 63,
-            "layout": [
-                {"label":"K00 (B0,D0)", "x":0, "y":0},
-                {"label":"K01 (B0,D1)", "x":1, "y":0},
-                {"label":"K02 (B0,D2)", "x":2, "y":0},
-                {"label":"K03 (B0,D3)", "x":3, "y":0},
-                {"label":"K04 (B0,D5)", "x":4, "y":0},
-                {"label":"K05 (B0,D4)", "x":5, "y":0},
-                {"label":"K06 (B0,D6)", "x":6, "y":0},
-                {"label":"K07 (B0,D7)", "x":7, "y":0},
-                {"label":"K08 (B0,B4)", "x":8, "y":0},
-                {"label":"K09 (B0,B5)", "x":9, "y":0},
-                {"label":"K0A (B0,B6)", "x":10, "y":0},
-                {"label":"K0B (B0,C6)", "x":11, "y":0},
-                {"label":"K0C (B0,C7)", "x":12, "y":0},
-                {"label":"K0D (B0,F7)", "x":13, "y":0, "w":2},
-                {"label":"K10 (B1,D0)", "x":0, "y":1, "w":1.5},
-                {"label":"K11 (B1,D1)", "x":1.5, "y":1},
-                {"label":"K12 (B1,D2)", "x":2.5, "y":1},
-                {"label":"K13 (B1,D3)", "x":3.5, "y":1},
-                {"label":"K14 (B1,D5)", "x":4.5, "y":1},
-                {"label":"K15 (B1,D4)", "x":5.5, "y":1},
-                {"label":"K16 (B1,D6)", "x":6.5, "y":1},
-                {"label":"K17 (B1,D7)", "x":7.5, "y":1},
-                {"label":"K18 (B1,B4)", "x":8.5, "y":1},
-                {"label":"K19 (B1,B5)", "x":9.5, "y":1},
-                {"label":"K1A (B1,B6)", "x":10.5, "y":1},
-                {"label":"K1B (B1,C6)", "x":11.5, "y":1},
-                {"label":"K1C (B1,C7)", "x":12.5, "y":1},
-                {"label":"K1D (B1,F7)", "x":13.5, "y":1, "w":1.5},
-                {"label":"K20 (B2,D0)", "x":0, "y":2, "w":1.75},
-                {"label":"K22 (B2,D2)", "x":1.75, "y":2},
-                {"label":"K23 (B2,D3)", "x":2.75, "y":2},
-                {"label":"K24 (B2,D5)", "x":3.75, "y":2},
-                {"label":"K25 (B2,D4)", "x":4.75, "y":2},
-                {"label":"K26 (B2,D6)", "x":5.75, "y":2},
-                {"label":"K27 (B2,D7)", "x":6.75, "y":2},
-                {"label":"K28 (B2,B4)", "x":7.75, "y":2},
-                {"label":"K29 (B2,B5)", "x":8.75, "y":2},
-                {"label":"K2A (B2,B6)", "x":9.75, "y":2},
-                {"label":"K2B (B2,C6)", "x":10.75, "y":2},
-                {"label":"K2C (B2,C7)", "x":11.75, "y":2},
-                {"label":"K2D (B2,F7)", "x":12.75, "y":2, "w":2.25},
-                {"label":"K31 (B3,D1)", "x":0, "y":3, "w":2.25},
-                {"label":"K32 (B3,D2)", "x":2.25, "y":3},
-                {"label":"K33 (B3,D3)", "x":3.25, "y":3},
-                {"label":"K34 (B3,D5)", "x":4.25, "y":3},
-                {"label":"K35 (B3,D4)", "x":5.25, "y":3},
-                {"label":"K36 (B3,D6)", "x":6.25, "y":3},
-                {"label":"K37 (B3,D7)", "x":7.25, "y":3},
-                {"label":"K38 (B3,B4)", "x":8.25, "y":3},
-                {"label":"K39 (B3,B5)", "x":9.25, "y":3},
-                {"label":"K3A (B3,B6)", "x":10.25, "y":3},
-                {"label":"K3B (B3,C6)", "x":11.25, "y":3, "w":1.75},
-                {"label":"K3C (B3,C7)", "x":13, "y":3},
-                {"label":"K3D (B3,F7)", "x":14, "y":3},
-                {"label":"K40 (E6,D0)", "x":0, "y":4, "w":1.25},
-                {"label":"K41 (E6,D1)", "x":1.25, "y":4, "w":1.25},
-                {"label":"K42 (E6,D2)", "x":2.5, "y":4, "w":1.25},
-                {"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25},
-                {"label":"K49 (E6,B5)", "x":10, "y":4},
-                {"label":"K4A (E6,B6)", "x":11, "y":4},
-                {"label":"K4B (E6,C6)", "x":12, "y":4},
-                {"label":"K4C (E6,C7)", "x":13, "y":4},
-                {"label":"K4D (E6,F7)", "x":14, "y":4}
-            ]
-        }
-    }
-    ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
-}
-

keyboards/bm60rgb/keymaps/default/keymap.c

@@ -1,34 +0,0 @@
-/* Copyright 2020 MechMerlin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT(
-        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
-        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_RSFT,        KC_UP,   KC_SLSH,
-        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-    [1] = LAYOUT(
-        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,
-        _______,     RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
-        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______,
-        _______,   _______,   _______,                      _______,                              _______, _______, _______, _______, _______
-    ),
-
-};

keyboards/bm60rgb/keymaps/default/readme.md

@@ -1 +0,0 @@
-# The default keymap for bm60rgb

keyboards/bm60rgb/readme.md

@@ -1,13 +0,0 @@
-# BM60 RGB
-
-A 60% hotswap inswitch RGB keyboard from KP Republic. 
-
-* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
-* Hardware Supported: BM60 RGB
-* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-60-gh60-hot-swappable-pcb-programmed-qmk-firmware-type-c)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make bm60rgb:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bm60rgb/rules.mk

@@ -1,38 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes        # Mouse keys
-EXTRAKEY_ENABLE = yes        # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no        # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no             # USB Nkey Rollover
-BACKLIGHT_ENABLE = no        # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no             # MIDI support
-UNICODE_ENABLE = no          # Unicode
-BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no            # Audio output on port C6
-FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no          # Enable support for HD44780 based LCDs
-RGB_MATRIX_ENABLE = WS2812
-LINK_TIME_OPTIMIZATION_ENABLE = yes
-
-# partially generated by KBFirmware JSON to QMK Parser
-# https://noroadsleft.github.io/kbf_qmk_converter/

keyboards/boardwalk/config.h

@@ -43,7 +43,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL */
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 
 // #define BACKLIGHT_PIN F5

keyboards/c39/keymaps/drashna/config.h

@@ -10,5 +10,3 @@
 
 #define RGB_DI_PIN B10
 #define RGBLED_NUM 15
-
-#define SOLENOID_PIN B11

keyboards/c39/keymaps/drashna/rules.mk

@@ -18,5 +18,3 @@ AUDIO_ENABLE = yes           # Audio output on port C6
 RGBLIGHT_ENABLE = yes       # RGB Enable / Disable
 
 RGBLIGHT_STARTUP_ANIMATION = yes
-
-HAPTIC_ENABLE = SOLENOID

keyboards/candybar/rules.mk

@@ -1,5 +1,37 @@
-# MCU name
-MCU = STM32F072
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+
+# Cortex version
+MCU  = cortex-m0
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/an_c/config.h

@@ -62,12 +62,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // dynamic keymaps start after this.
 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
 
-// VIA lighting is handled by the keyboard-level code
-#define VIA_CUSTOM_LIGHTING_ENABLE
-
-// Let VIA handle the QMK RGBLIGHT 
-#define VIA_QMK_RGBLIGHT_ENABLE
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/cannonkeys/an_c/rules.mk

@@ -1,5 +1,35 @@
-# MCU name
-MCU = STM32F072
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.
@@ -10,6 +40,8 @@ VPATH += keyboards/cannonkeys/stm32f072
 SRC =	keyboard.c \
       led.c
 
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control

keyboards/cannonkeys/chimera65/rules.mk

@@ -1,5 +1,35 @@
-# MCU name
-MCU = STM32F072
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.
@@ -10,6 +40,8 @@ VPATH += keyboards/cannonkeys/stm32f072
 SRC =	keyboard.c \
       led.c
 
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control

keyboards/cannonkeys/instant60/config.h

@@ -62,12 +62,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // dynamic keymaps start after this.
 #define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
 
-// VIA lighting is handled by the keyboard-level code
-#define VIA_CUSTOM_LIGHTING_ENABLE
-
-// Let VIA handle the QMK RGBLIGHT 
-#define VIA_QMK_RGBLIGHT_ENABLE
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/cannonkeys/instant60/rules.mk

@@ -1,5 +1,39 @@
-# MCU name
-MCU = STM32F072
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.