Improve a number of things about how MILC operates (#7344)

* Pull in updates for MILC

* Remove the shadow argparser
* Make it easier to reason about arguments and how they're translated into the config tree
* Populate self.config during init to support setting user.qmk_home for the global CLI
* Remove the short argument -c so that we can unambiguously determine the config file location without doing full argument processing
* Remove the --save-config option as it's a little confusing anyway
* Use Pathlib for path manipulation

* Fix commands with no arguments

docs/cli.md

@@ -95,6 +95,30 @@ qmk compile <configuratorExport.json>
 qmk compile -kb <keyboard_name> -km <keymap_name>
 ```
 
+## `qmk flash`
+
+This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default.
+To specify a different bootloader, use `-bl <bootloader>`. Visit <https://docs.qmk.fm/#/flashing>
+for more details of the available bootloaders.
+
+**Usage for Configurator Exports**:
+
+```
+qmk flash <configuratorExport.json> -bl <bootloader>
+```
+
+**Usage for Keymaps**:
+
+```
+qmk flash -kb <keyboard_name> -km <keymap_name> -bl <bootloader>
+```
+
+**Listing the Bootloaders**
+
+```
+qmk flash -b
+```
+
 ## `qmk config`
 
 This command lets you configure the behavior of QMK. For the full `qmk config` documentation see [CLI Configuration](cli_configuration.md).

docs/documentation_templates.md

@@ -28,9 +28,9 @@ the Ctrl, Alt, or GUI modifiers are held down.
 
 A compact 40% (12x4) ortholinear keyboard kit made and sold by OLKB and Massdrop. [More info on qmk.fm](http://qmk.fm/planck/)
 
-Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert)  
-Hardware Supported: Planck PCB rev1, rev2, rev3, rev4, Teensy 2.0  
-Hardware Availability: [OLKB.com](https://olkb.com), [Massdrop](https://www.massdrop.com/buy/planck-mechanical-keyboard?mode=guest_open)
+* Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert)
+* Hardware Supported: Planck PCB rev1, rev2, rev3, rev4, Teensy 2.0
+* Hardware Availability: [OLKB.com](https://olkb.com), [Massdrop](https://www.massdrop.com/buy/planck-mechanical-keyboard?mode=guest_open)
 
 Make example for this keyboard (after setting up your build environment):
 
@@ -38,5 +38,3 @@ Make example for this keyboard (after setting up your build environment):
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 ```
-
-There needs to be two spaces at the end of the `Keyboard Maintainer` and `Hardware Supported` lines for it to render correctly with Markdown.

docs/faq_debug.md

@@ -27,7 +27,7 @@ You may need privilege to access the device on OS like Linux.
 Check:
 - *hid_listen* finds your device. See above.
 - Enable debug with pressing **Magic**+d. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands).
-- set `debug_enable=true` usually in `matrix_init()` in **matrix.c**.
+- set `debug_enable=true`. See [Testing and Debugging](newbs_testing_debugging.md#debugging)
 - try using 'print' function instead of debug print. See **common/print.h**.
 - disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).
 

docs/feature_haptic_feedback.md

@@ -41,11 +41,15 @@ First you will need a build a circuit to drive the solenoid through a mosfet as
 
 [Wiring diagram provided by Adafruit](https://playground.arduino.cc/uploads/Learning/solenoid_driver.pdf)
 
-Select a pin that has PWM for the signal pin
 
-```
-#define SOLENOID_PIN *pin*
-```
+| Settings                 | Default       | Description                                           |
+|--------------------------|---------------|-------------------------------------------------------|
+|`SOLENOID_PIN`            | *Not defined* |Configures the pin that the Solenoid is connected to.  |
+|`SOLENOID_DEFAULT_DWELL`  | `12` ms       |Configures the default dwell time for the solenoid.    |
+|`SOLENOID_MIN_DWELL`      | `4` ms        |Sets the lower limit for the dwell.                    |
+|`SOLENOID_MAX_DWELL`      | `100` ms      |Sets the upper limit for the dwell.                    |
+
+?> Dwell time is how long the "plunger" stays activated.  The dwell time changes how the solenoid sounds.
 
 Beware that some pins may be powered during bootloader (ie. A13 on the STM32F303 chip) and will result in the solenoid kept in the on state through the whole flashing process. This may overheat and damage the solenoid. If you find that the pin the solenoid is connected to is triggering the solenoid during bootloader/DFU, select another pin.
 
@@ -151,4 +155,4 @@ This will set what sequence HPT_RST will set as the active mode. If not defined,
 
 ### DRV2605L Continuous Haptic Mode
 
-This mode sets continuous haptic feedback with the option to increase or decrease strength. 
+This mode sets continuous haptic feedback with the option to increase or decrease strength. 

docs/feature_tap_dance.md

@@ -333,6 +333,8 @@ And then simply use `TD(X_CTL)` anywhere in your keymap.
 
 If you want to implement this in your userspace, then you may want to check out how [DanielGGordon](https://github.com/qmk/qmk_firmware/tree/master/users/gordon) has implemented this in their userspace.
 
+> In this configuration "hold" takes place **after** tap dance timeout (see `ACTION_TAP_DANCE_FN_ADVANCED_TIME`). To achieve instant hold, remove `state->interrupted` checks in conditions. As a result you may use comfortable longer tapping periods to have more time for taps and not to wait too long for holds (try starting with doubled `TAPPING_TERM`).
+
 ### Example 5: Using tap dance for advanced mod-tap and layer-tap keys
 
 Tap dance can be used to emulate `MT()` and `LT()` behavior when the tapped code is not a basic keycode. This is useful to send tapped keycodes that normally require `Shift`, such as parentheses or curly braces—or other modified keycodes, such as `Control + X`.

docs/ja/newbs.md

@@ -1,8 +1,9 @@
 # QMK 初心者ガイド
 
 <!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs.md
-  $ git diff ed0575fc8 HEAD docs/newbs.md
+  git diff ed0575fc8 HEAD docs/newbs.md | cat
 -->
 
 QMK は、メカニカルキーボード用の強力なオープンソースファームウェアです。
@@ -23,7 +24,7 @@ QMK は[多くの趣味のキーボード](http://qmk.fm/keyboards/)をサポー
 * [オンライン GUI を使用して初めてのファームウェアを構築する](newbs_building_firmware_configurator.md)
 * [ファームウェアを書きこむ](newbs_flashing.md)
 * [テストとデバッグ](newbs_testing_debugging.md)
-* [Git の最良の慣行](newbs_best_practices.md)
+* [QMK における Git 運用作法](newbs_best_practices.md)
 * [さらに学ぶための学習リソース](newbs_learn_more_resources.md)
 
 このガイドは、これまでソフトウェアをコンパイルしたことがない人を支援することに特化しています。

docs/ja/newbs_best_practices.md

@@ -1,35 +1,60 @@
-# Best Practices
+<!-- # Best Practices -->
+# QMK における Git 運用作法
 
 <!---
-  original document: ed0575fc8:docs/newbs_best_practices.md
-  $ git diff ed0575fc8 HEAD docs/newbs_best_practices.md
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
+  original document: e75919960:docs/newbs_best_practices.md
+  git diff e75919960 HEAD docs/newbs_best_practices.md | cat
 -->
 
-## Or, "How I Learned to Stop Worrying and Love Git."
+<!-- ## Or, "How I Learned to Stop Worrying and Love Git." -->
+## または、如何にして私は心配することをやめて Git を愛することを学んだか。
 
-This document aims to instruct novices in the best ways to have a smooth experience in contributing to QMK. We will walk through the process of contributing to QMK, detailing some ways to make this task easier, and then later we'll break some things in order to teach you how to fix them.
+<!-- _Almost the same as #7231:25fdbf2a0:newbs_git_best_practices.md L5_ -->
+<!-- This document aims to instruct novices in the best ways to have a smooth experience in contributing to QMK. We will walk through the process of contributing to QMK, detailing some ways to make this task easier, and then later we'll break some things in order to teach you how to fix them. -->
+この文書は、QMK への貢献をスムーズに行なう最もよい方法を初心者に教えることを目的としています。
+QMK に貢献するプロセスを順を追って説明し、この作業を簡単にするいくつかの方法を詳しく説明します。
+その後、意図的に一部を壊してみせて、それらを修正する方法を教えます。
 
-This document assumes a few things:
+<!-- This document assumes a few things: -->
+このドキュメントは以下のことを前提としています:
 
-1. You have a GitHub account, and have [forked the qmk_firmware repository](getting_started_github.md) to your account.
-2. You've [set up your build environment](newbs_getting_started.md?id=environment-setup).
+<!-- _Same as #7231:25fdbf2a0:newbs_git_best_practices.md L9_  -->
+<!-- 1. You have a GitHub account, and have [forked the qmk_firmware repository](getting_started_github.md) to your account. -->
+<!-- 2. You've [set up your build environment](newbs_getting_started.md?id=environment-setup). -->
+<!-- #7231:da7d49246: 2. You've set up both [your build environment](newbs_getting_started.md?id=set-up-your-environment) and [QMK](newbs_getting_started.md?id=set-up-qmk). -->
 
+1. あなたは GitHub アカウントがあり、アカウントに [qmk_firmware リポジトリをフォーク](getting_started_github.md) している。
+2. あなたは、[環境構築](newbs_getting_started.md#環境構築) と [QMK の設定](newbs_getting_started.md#qmk-の設定) を両方とも完了している。
 
-## Your fork's master: Update Often, Commit Never
+<!-- ## Your fork's master: Update Often, Commit Never -->
+## あなたのフォークの master ブランチ: 更新は頻繁に、コミットはしないこと
 
-It is highly recommended for QMK development, regardless of what is being done or where, to keep your `master` branch updated, but ***never*** commit to it. Instead, do all your changes in a development branch and issue pull requests from your branches when you're developing.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L3_  -->
+<!-- It is highly recommended for QMK development, regardless of what is being done or where, to keep your `master` branch updated, but ***never*** commit to it. Instead, do all your changes in a development branch and issue pull requests from your branches when you're developing. -->
+QMK の開発では、何がどこで行われているかにかかわらず、`master` ブランチを最新の状態に保つことを強くお勧めします、しかし `master` ブランチには***絶対に直接コミットしないでください***。
+代わりに、あなたのすべての変更は開発ブランチで行い、あなたが開発する時にはそのブランチからプルリクエストを発行します。
 
-To reduce the chances of merge conflicts &mdash; instances where two or more users have edited the same part of a file concurrently &mdash; keep your `master` branch relatively up-to-date, and start any new developments by creating a new branch.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L5_  -->
+<!-- To reduce the chances of merge conflicts &mdash; instances where two or more users have edited the same part of a file concurrently &mdash; keep your `master` branch relatively up-to-date, and start any new developments by creating a new branch. -->
+マージの競合 &mdash; これは 2人以上のユーザーがファイルの同じ部分をそれぞれ異なる編集をして統合できなくなった状態 &mdash; の可能性を減らすため `master` ブランチをなるべく最新の状態に保ち、新しいブランチを作成して新しい開発を開始します。
 
-### Updating your master branch
+<!-- ### Updating your master branch -->
+### あなたの master ブランチを更新する
 
-To keep your `master` branch updated, it is recommended to add the QMK Firmware repository ("repo") as a remote repository in git. To do this, open your Git command line interface and enter:
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L9_  -->
+<!-- To keep your `master` branch updated, it is recommended to add the QMK Firmware repository ("repo") as a remote repository in git. To do this, open your Git command line interface and enter: -->
+`master` ブランチを最新の状態に保つには、git のリモートリポジトリとして QMK ファームウェアのリポジトリ(以降、QMK リポジトリ)を追加することをお勧めします。
+これを行うには、Git コマンドラインインターフェイスを開き、次のように入力します。
 
 ```
 git remote add upstream https://github.com/qmk/qmk_firmware.git
 ```
 
-To verify that the repository has been added, run `git remote -v`, which should return the following:
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L15_  -->
+<!-- To verify that the repository has been added, run `git remote -v`, which should return the following: -->
+リポジトリが追加されたことを確認するには、`git remote -v` を実行します。
+次のように表示されます。(訳注: `upstream` は`上流`という意味です。)
 
 ```
 $ git remote -v
@@ -39,9 +64,15 @@ upstream        https://github.com/qmk/qmk_firmware.git (fetch)
 upstream        https://github.com/qmk/qmk_firmware.git (push)
 ```
 
-Now that this is done, you can check for updates to the repo by running `git fetch upstream`. This retrieves the branches and tags &mdash; collectively referred to as "refs" &mdash; from the QMK repo, which now has the nickname `upstream`. We can now compare the data on our fork `origin` to that held by QMK.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L25_  -->
+<!-- Now that this is done, you can check for updates to the repo by running `git fetch upstream`. This retrieves the branches and tags &mdash; collectively referred to as "refs" &mdash; from the QMK repo, which now has the nickname `upstream`. We can now compare the data on our fork `origin` to that held by QMK. -->
+これが完了すると、`git fetch upstream` を実行してリポジトリの更新を確認できます。
+このコマンドは `upstream` というニックネームを持つ QMK リポジトリから、ブランチとタグ &mdash; "refs" と総称されます &mdash; を取得します。
+これで、あなたのフォーク `origin` のデータを QMK が保持するデータと比較できます。
 
-To update your fork's master, run the following, hitting the Enter key after each line:
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L27_  -->
+<!-- To update your fork's master, run the following, hitting the Enter key after each line: -->
+あなたのフォークの `master` を更新するには、次を実行します、各行の後にEnterキーを押してください:
 
 ```
 git checkout master
@@ -50,76 +81,128 @@ git pull upstream master
 git push origin master
 ```
 
-This switches you to your `master` branch, retrieves the refs from the QMK repo, downloads the current QMK `master` branch to your computer, and then uploads it to your fork.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L36_  -->
+<!-- This switches you to your `master` branch, retrieves the refs from the QMK repo, downloads the current QMK `master` branch to your computer, and then uploads it to your fork. -->
+これにより、あなたの `master` ブランチに切り替わり、QMK リポジトリから 'refs' を取得し、現在の QMK の `master` ブランチをコンピュータにダウンロードしてから、あなたのフォークにアップロードします。
 
-### Making Changes
+<!-- ### Making Changes -->
+### 変更を行なう
 
-To make changes, create a new branch by entering:
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L40_  -->
+<!-- To make changes, create a new branch by entering: -->
+変更するには、以下を入力して新しいブランチを作成します:
 
 ```
 git checkout -b dev_branch
 git push --set-upstream origin dev_branch
 ```
 
-This creates a new branch named `dev_branch`, checks it out, and then saves the new branch to your fork. The `--set-upstream` argument tells git to use your fork and the `dev_branch` branch every time you use `git push` or `git pull` from this branch. It only needs to be used on the first push; after that, you can safely use `git push` or `git pull`, without the rest of the arguments.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L47_  -->
+<!-- This creates a new branch named `dev_branch`, checks it out, and then saves the new branch to your fork. The `--set-upstream` argument tells git to use your fork and the `dev_branch` branch every time you use `git push` or `git pull` from this branch. It only needs to be used on the first push; after that, you can safely use `git push` or `git pull`, without the rest of the arguments. -->
+これにより、`dev_branch` という名前の新しいブランチが作成され、チェックアウトされ、新しいブランチがあなたのフォークに保存されます。
+`--set-upstream` 引数は、このブランチから `git push` または `git pull` を使用するたびに、あなたのフォークと `dev_branch` ブランチを使用するように git に指示します。
+この引数は最初のプッシュでのみ使用する必要があります。
+その後、残りの引数なしで `git push` または `git pull` を安全に使用できます。
 
-!> With `git push`, you can use `-u` in place of `--set-upstream` &mdash; `-u` is an alias for `--set-upstream`.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L49_  -->
+<!--  With `git push`, you can use `-u` in place of `--set-upstream` &mdash; `-u` is an alias for `--set-upstream`. -->
+!> `git push` では、`-set-upstream` の代わりに `-u` を使用できます、 `-u` は `--set-upstream` のエイリアスです。
 
-You can name your branch nearly anything you want, though it is recommended to name it something related to the changes you are going to make.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L51_  -->
+<!-- You can name your branch nearly anything you want, though it is recommended to name it something related to the changes you are going to make. -->
+ブランチにはほぼ任意の名前を付けることができますが、あなたが行なう変更を表す名前を付けることをお勧めします。
 
-By default `git checkout -b` will base your new branch on the branch that is checked out. You can base your new branch on an existing branch that is not checked out by adding the name of the existing branch to the command:
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L53_  -->
+<!-- By default `git checkout -b` will base your new branch on the branch that is checked out. You can base your new branch on an existing branch that is not checked out by adding the name of the existing branch to the command: -->
+デフォルトでは、`git checkout -b`は、今チェックアウトされているブランチに基づいて新しいブランチを作成します。
+コマンド末尾に既存のブランチの名前を追加指定することにより、チェックアウトされていない既存のブランチを基にして新しいブランチを作成できます:
 
 ```
 git checkout -b dev_branch master
 ```
 
-Now that you have a development branch, open your text editor and make whatever changes you need to make. It is recommended to make many small commits to your branch; that way, any change that causes issues can be more easily traced and undone if needed. To make your changes, edit and save any files that need to be updated, add them to Git's *staging area*, and then commit them to your branch:
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L59_  -->
+<!-- Now that you have a development branch, open your text editor and make whatever changes you need to make. It is recommended to make many small commits to your branch; that way, any change that causes issues can be more easily traced and undone if needed. To make your changes, edit and save any files that need to be updated, add them to Git's *staging area*, and then commit them to your branch: -->
+これで開発ブランチができたのでテキストエディタを開き必要な変更を加えます。
+ブランチに対して多くの小さなコミットを行うことをお勧めします。
+そうすることで、問題を引き起こす変更をより簡単に特定し必要に応じて元に戻すことができます。
+変更を加えるには、更新が必要なファイルを編集して保存し、Git の *ステージングエリア* に追加してから、ブランチにコミットします:
 
 ```
 git add path/to/updated_file
 git commit -m "My commit message."
 ```
 
-`git add` adds files that have been changed to Git's *staging area*, which is Git's "loading zone." This contains the changes that are going to be *committed* by `git commit`, which saves the changes to the repo. Use descriptive commit messages so you can know what was changed at a glance.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L66_  -->
+<!-- `git add` adds files that have been changed to Git's *staging area*, which is Git's "loading zone." This contains the changes that are going to be *committed* by `git commit`, which saves the changes to the repo. Use descriptive commit messages so you can know what was changed at a glance. -->
+`git add`は、変更されたファイルを Git の *ステージングエリア* に追加します。
+これは、Git の「ロードゾーン」です。
+これには、`git commit` によって *コミット* される変更が含まれており、リポジトリへの変更が保存されます。
+変更内容が一目でわかるように、説明的なコミットメッセージを使用します。
 
-!> If you've changed a lot of files, but all the files are part of the same change, you can use `git add .` to add all the changed files that are in your current directory, rather than having to add each file individually.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L68_  -->
+<!-- !> If you've changed a lot of files, but all the files are part of the same change, you can use `git add .` to add all the changed files that are in your current directory, rather than having to add each file individually. -->
+!> 多くのファイルを変更したが、すべてのファイルが同じ変更の一部である場合、各ファイルを個別に追加するのではなく、 `git add .` を使用して、現在のディレクトリにあるすべての変更されたファイルを追加できます。
 
-### Publishing Your Changes
+<!-- ### Publishing Your Changes -->
+### 変更を公開する
 
-The last step is to push your changes to your fork. To do this, enter `git push`. Git now publishes the current state of `dev_branch` to your fork.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_using_your_master_branch.md L72_  -->
+<!-- The last step is to push your changes to your fork. To do this, enter `git push`. Git now publishes the current state of `dev_branch` to your fork. -->
+最後のステップは、変更をフォークにプッシュすることです。これを行うには、`git push`と入力します。
+Git は `dev_branch` の現在の状態をフォークに公開します。
 
+<!-- ## Resolving Merge Conflicts -->
+##  マージの競合の解決
 
-## Resolving Merge Conflicts
+<!-- _Same as #7231:25fdbf2a0:newbs_git_resolving_merge_conflicts.md L3_  -->
+<!-- Sometimes when your work in a branch takes a long time to complete, changes that have been made by others conflict with changes you have made to your branch when you open a pull request. This is called a *merge conflict*, and is what happens when multiple people edit the same parts of the same files. -->
+ブランチでの作業の完了に時間がかかる場合、他の人が行った変更が、プルリクエストを開いたときにブランチに加えた変更と競合することがあります。
+これは *マージの競合* と呼ばれ、複数の人が同じファイルの同じ部分を編集すると発生します。
 
-Sometimes when your work in a branch takes a long time to complete, changes that have been made by others conflict with changes you have made to your branch when you open a pull request. This is called a *merge conflict*, and is what happens when multiple people edit the same parts of the same files.
+<!-- ### Rebasing Your Changes -->
+### 変更のリベース
 
-### Rebasing Your Changes
+<!-- _Same as #7231:25fdbf2a0:newbs_git_resolving_merge_conflicts.md L9_  -->
+<!-- A *rebase* is Git's way of taking changes that were applied at one point, reversing them, and then applying the same changes to another point. In the case of a merge conflict, you can rebase your branch to grab the changes that were made between when you created your branch and the present time. -->
+*リベース* は、ある時点で適用された変更を取得し、それらを元に戻し、次に同じ変更を別のポイントに適用する Git の方法です。
+マージの競合が発生した場合、ブランチをリベースして、ブランチを作成してから現在までに行われた変更を取得できます。
 
-A *rebase* is Git's way of taking changes that were applied at one point, reversing them, and then applying the same changes to another point. In the case of a merge conflict, you can rebase your branch to grab the changes that were made between when you created your branch and the present time.
-
-To start, run the following:
+<!-- _Same as #7231:25fdbf2a0:newbs_git_resolving_merge_conflicts.md L11_  -->
+<!-- To start, run the following: -->
+開始するには、次を実行します:
 
 ```
 git fetch upstream
 git rev-list --left-right --count HEAD...upstream/master
 ```
 
-The `git rev-list` command entered here returns the number of commits that differ between the current branch and QMK's master branch. We run `git fetch` first to make sure we have the refs that represent the current state of the upstream repo. The output of the `git rev-list` command entered returns two numbers:
+<!-- _Same as #7231:25fdbf2a0:newbs_git_resolving_merge_conflicts.md L18_  -->
+<!-- The `git rev-list` command entered here returns the number of commits that differ between the current branch and QMK's master branch. We run `git fetch` first to make sure we have the refs that represent the current state of the upstream repo. The output of the `git rev-list` command entered returns two numbers: -->
+ここに入力された `git rev-list` コマンドは、現在のブランチと QMK の master ブランチで異なるコミットの数を返します。
+最初に `git fetch` を実行して、upstream リポジトリの現在の状態を表す refs があることを確認します。
+入力された `git rev-list` コマンドの出力は2つの数値を返します:
 
 ```
 $ git rev-list --left-right --count HEAD...upstream/master
 7       35
 ```
 
-The first number represents the number of commits on the current branch since it was created, and the second number is the number of commits made to `upstream/master` since the current branch was created, and thus, the changes that are not recorded in the current branch.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_resolving_merge_conflicts.md L25_  -->
+<!-- The first number represents the number of commits on the current branch since it was created, and the second number is the number of commits made to `upstream/master` since the current branch was created, and thus, the changes that are not recorded in the current branch. -->
+最初の数字は、現在のブランチが作成されてからのコミット数を表し、2番目の数字は、現在のブランチが作成されてから `upstream/master` に対して行われたコミットの数であり、したがって、現在のブランチに記録されていない変更です。
 
-Now that the current states of both the current branch and the upstream repo are known, we can start a rebase operation:
+<!-- _Same as #7231:25fdbf2a0:newbs_git_resolving_merge_conflicts.md L27_-->
+<!-- Now that the current states of both the current branch and the upstream repo are known, we can start a rebase operation: -->
+現在のブランチと upstream リポジトリの両方の現在の状態がわかったので、リベース操作を開始できます:
 
 ```
 git rebase upstream/master
 ```
 
-This tells Git to undo the commits on the current branch, and then reapply them against QMK's master branch.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_resolving_merge_conflicts.md L33_  -->
+<!-- This tells Git to undo the commits on the current branch, and then reapply them against QMK's master branch. -->
+これにより、Git は現在のブランチのコミットを取り消してから、QMK の master ブランチに対してコミットを再適用します。
 
 ```
 $ git rebase upstream/master
@@ -140,7 +223,10 @@ You can instead skip this commit: run "git rebase --skip".
 To abort and get back to the state before "git rebase", run "git rebase --abort".
 ```
 
-This tells us that we have a merge conflict, and gives the name of the file with the conflict. Open the conflicting file in your text editor, and somewhere in the file, you'll find something like this:
+<!-- _Same as #7231:25fdbf2a0:newbs_git_resolving_merge_conflicts.md L54_  -->
+<!-- This tells us that we have a merge conflict, and gives the name of the file with the conflict. Open the conflicting file in your text editor, and somewhere in the file, you'll find something like this: -->
+これにより、マージの競合があることがわかり、競合のあるファイルの名前が示されます。
+テキストエディタで競合するファイルを開くと、ファイルのどこかに次のような行があります:
 
 ```
 <<<<<<< HEAD
@@ -150,19 +236,28 @@ This tells us that we have a merge conflict, and gives the name of the file with
 >>>>>>> Commit #1
 ```
 
-The line `<<<<<<< HEAD` marks the beginning of a merge conflict, and the `>>>>>>> Commit #1` line marks the end, with the conflicting sections separated by `=======`. The part on the `HEAD` side is from the QMK master version of the file, and the part marked with the commit message is from the current branch and commit.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_resolving_merge_conflicts.md L64_  -->
+<!-- The line `<<<<<<< HEAD` marks the beginning of a merge conflict, and the `>>>>>>> Commit #1` line marks the end, with the conflicting sections separated by `=======`. The part on the `HEAD` side is from the QMK master version of the file, and the part marked with the commit message is from the current branch and commit. -->
+行 `<<<<<<< HEAD` はマージ競合の始まりを示し、行 `>>>>>>> commit #1` は終了を示し、競合するセクションは `=======` で区切られます。
+`HEAD` 側の部分はファイルの QMK master バージョンからのものであり、コミットメッセージでマークされた部分は現在のブランチとコミットからのものです。
 
-Because Git tracks *changes to files* rather than the contents of the files directly, if Git can't find the text that was in the file previous to the commit that was made, it won't know how to edit the file. Re-editing the file will solve the conflict. Make your changes, and then save the file.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_resolving_merge_conflicts.md L66_  -->
+<!-- Because Git tracks *changes to files* rather than the contents of the files directly, if Git can't find the text that was in the file previous to the commit that was made, it won't know how to edit the file. Re-editing the file will solve the conflict. Make your changes, and then save the file. -->
+Git はファイルの内容ではなく *ファイルへの変更* を直接追跡するため、Git がコミットの前にファイル内にあったテキストを見つけられない場合、ファイルの編集方法がわかりません。
+ファイルを再編集して、競合を解決します。
+変更を加えてから、ファイルを保存します。
 
 ```
 <p>Need help? Email support@webhost.us.</p>
 ```
 
-Now run:
+そしてコマンド実行:
 
 ```
 git add conflicting_file_1.txt
 git rebase --continue
 ```
 
-Git logs the changes to the conflicting file, and continues applying the commits from our branch until it reaches the end.
+<!-- _Same as #7231:25fdbf2a0:newbs_git_resolving_merge_conflicts.md L79_  -->
+<!-- Git logs the changes to the conflicting file, and continues applying the commits from our branch until it reaches the end. -->
+Git は、競合するファイルへの変更をログに記録し、ブランチのコミットが最後に達するまで適用し続けます。

docs/ja/newbs_building_firmware.md

@@ -1,8 +1,9 @@
 # 初めてのファームウェアを構築する(コマンドライン版)
 
 <!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_building_firmware.md
-  $ git diff ed0575fc8 HEAD docs/newbs_building_firmware.md
+  git diff ed0575fc8 HEAD docs/newbs_building_firmware.md | cat
 -->
 
 ビルド環境をセットアップしたので、カスタムファームウェアのビルドを開始する準備ができました。

docs/ja/newbs_building_firmware_configurator.md

@@ -1,8 +1,9 @@
 # QMK Configurator
 
 <!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_building_firmware_configurator.md
-  $ git diff ed0575fc8 HEAD docs/newbs_building_firmware_configurator.md
+  git diff ed0575fc8 HEAD docs/newbs_building_firmware_configurator.md | cat
 -->
 
 [QMK Configurator](https://config.qmk.fm) は、QMKファームウェアの hex ファイルを生成するオンライングラフィカルユーザーインターフェイスです。

docs/ja/newbs_flashing.md

@@ -1,8 +1,9 @@
 # ファームウェアを書きこむ
 
 <!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_flashing.md
-  $ git diff ed0575fc8 HEAD docs/newbs_flashing.md
+  git diff ed0575fc8 HEAD docs/newbs_flashing.md | cat
 -->
 
 カスタムファームウェアは出来たので、キーボードに書き込みたくなるでしょう/フラッシュしたくなるでしょう。

docs/ja/newbs_getting_started.md

@@ -1,8 +1,9 @@
 # イントロダクション
 
 <!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: docs/newbs_getting_started.md
-  $ git diff 161d469 HEAD docs/newbs_getting_started.md
+  git diff 161d469 HEAD docs/newbs_getting_started.md | cat
 -->
 
 キーボードにはプロセッサが入っており、それはコンピュータに入っているものと大して違わないものです。

docs/ja/newbs_learn_more_resources.md

@@ -1,8 +1,9 @@
 # 学習リソース
 
 <!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_learn_more_resources.md
-  $ git diff ed0575fc8 HEAD docs/newbs_learn_more_resources.md
+  git diff ed0575fc8 HEAD docs/newbs_learn_more_resources.md | cat
 -->
 
 これらのリソースは、QMKコミュニティの新しいメンバーに、初心者向けドキュメントで提供されている情報に対する理解を深めることを目的としています。

docs/ja/newbs_testing_debugging.md

@@ -1,8 +1,9 @@
 # テストとデバッグ
 
 <!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_testing_debugging.md
-  $ git diff ed0575fc8 HEAD docs/newbs_testing_debugging.md
+  git diff ed0575fc8 HEAD docs/newbs_testing_debugging.md | cat
 -->
 
 カスタムファームウェアをキーボードへ書き込んだら、テストする準備が整います。運が良ければ全て問題なく動作しているはずですが、もしそうでなければこのドキュメントがどこが悪いのか調べるのに役立ちます。

drivers/haptic/DRV2605L.c

@@ -115,15 +115,13 @@ void DRV_init(void) {
 }
 
 void DRV_rtp_init(void) {
-  DRV_write(DRV_GO, 0x00);
-  DRV_write(DRV_RTP_INPUT, 20); //20 is the lowest value I've found where haptics can still be felt. 
-  DRV_write(DRV_MODE, 0x05); 
-  DRV_write(DRV_GO, 0x01);
+    DRV_write(DRV_GO, 0x00);
+    DRV_write(DRV_RTP_INPUT, 20);  // 20 is the lowest value I've found where haptics can still be felt.
+    DRV_write(DRV_MODE, 0x05);
+    DRV_write(DRV_GO, 0x01);
 }
 
-void DRV_amplitude(uint8_t amplitude) {
-  DRV_write(DRV_RTP_INPUT, amplitude);
-}
+void DRV_amplitude(uint8_t amplitude) { DRV_write(DRV_RTP_INPUT, amplitude); }
 
 void DRV_pulse(uint8_t sequence) {
     DRV_write(DRV_GO, 0x00);

drivers/haptic/haptic.c

@@ -169,12 +169,12 @@ void haptic_set_mode(uint8_t mode) {
 }
 
 void haptic_set_amplitude(uint8_t amp) {
-  haptic_config.amplitude = amp;
-  eeconfig_update_haptic(haptic_config.raw);
-  xprintf("haptic_config.amplitude = %u\n", haptic_config.amplitude);
-  #ifdef DRV2605L
-  DRV_amplitude(amp);
-  #endif
+    haptic_config.amplitude = amp;
+    eeconfig_update_haptic(haptic_config.raw);
+    xprintf("haptic_config.amplitude = %u\n", haptic_config.amplitude);
+#ifdef DRV2605L
+    DRV_amplitude(amp);
+#endif
 }
 
 void haptic_set_buzz(uint8_t buzz) {
@@ -211,52 +211,50 @@ uint8_t haptic_get_dwell(void) {
 }
 
 void haptic_enable_continuous(void) {
-  haptic_config.cont        = 1;
-  xprintf("haptic_config.cont = %u\n", haptic_config.cont);
-  eeconfig_update_haptic(haptic_config.raw);
-  #ifdef DRV2605L
-  DRV_rtp_init();
-  #endif
+    haptic_config.cont = 1;
+    xprintf("haptic_config.cont = %u\n", haptic_config.cont);
+    eeconfig_update_haptic(haptic_config.raw);
+#ifdef DRV2605L
+    DRV_rtp_init();
+#endif
 }
 
 void haptic_disable_continuous(void) {
-  haptic_config.cont        = 0;
-  xprintf("haptic_config.cont = %u\n", haptic_config.cont);
-  eeconfig_update_haptic(haptic_config.raw);
-  #ifdef DRV2605L
-  DRV_write(DRV_MODE,0x00); 
-  #endif
+    haptic_config.cont = 0;
+    xprintf("haptic_config.cont = %u\n", haptic_config.cont);
+    eeconfig_update_haptic(haptic_config.raw);
+#ifdef DRV2605L
+    DRV_write(DRV_MODE, 0x00);
+#endif
 }
 
 void haptic_toggle_continuous(void) {
 #ifdef DRV2605L
-if (haptic_config.cont) {
-  haptic_disable_continuous();
-  } else {
-    haptic_enable_continuous();
-  }
-  eeconfig_update_haptic(haptic_config.raw);
+    if (haptic_config.cont) {
+        haptic_disable_continuous();
+    } else {
+        haptic_enable_continuous();
+    }
+    eeconfig_update_haptic(haptic_config.raw);
 #endif
 }
 
-
 void haptic_cont_increase(void) {
-  uint8_t amp = haptic_config.amplitude + 10;
-  if (haptic_config.amplitude >= 120) {
-    amp = 120;
-  }
-  haptic_set_amplitude(amp);
+    uint8_t amp = haptic_config.amplitude + 10;
+    if (haptic_config.amplitude >= 120) {
+        amp = 120;
+    }
+    haptic_set_amplitude(amp);
 }
 
 void haptic_cont_decrease(void) {
-  uint8_t amp = haptic_config.amplitude - 10;
-  if (haptic_config.amplitude < 20) {
-    amp = 20;
-  }
-  haptic_set_amplitude(amp);
+    uint8_t amp = haptic_config.amplitude - 10;
+    if (haptic_config.amplitude < 20) {
+        amp = 20;
+    }
+    haptic_set_amplitude(amp);
 }
 
-
 void haptic_play(void) {
 #ifdef DRV2605L
     uint8_t play_eff = 0;
@@ -269,7 +267,6 @@ void haptic_play(void) {
 }
 
 bool process_haptic(uint16_t keycode, keyrecord_t *record) {
-
     if (keycode == HPT_ON && record->event.pressed) {
         haptic_enable();
     }
@@ -300,16 +297,16 @@ bool process_haptic(uint16_t keycode, keyrecord_t *record) {
     if (keycode == HPT_DWLD && record->event.pressed) {
         haptic_dwell_decrease();
     }
-    if (keycode == HPT_CONT && record->event.pressed) { 
-        haptic_toggle_continuous(); 
+    if (keycode == HPT_CONT && record->event.pressed) {
+        haptic_toggle_continuous();
     }
-    if (keycode == HPT_CONI && record->event.pressed) { 
-        haptic_cont_increase(); 
+    if (keycode == HPT_CONI && record->event.pressed) {
+        haptic_cont_increase();
     }
-    if (keycode == HPT_COND && record->event.pressed) { 
-        haptic_cont_decrease(); 
+    if (keycode == HPT_COND && record->event.pressed) {
+        haptic_cont_decrease();
     }
-      
+
     if (haptic_config.enable) {
         if (record->event.pressed) {
             // keypress

drivers/haptic/haptic.h

@@ -34,14 +34,14 @@
 typedef union {
     uint32_t raw;
     struct {
-        bool     enable    :1;
-        uint8_t  feedback  :2;
-        uint8_t  mode      :7;
-        bool     buzz      :1;
-        uint8_t  dwell     :7;
-        bool     cont      :1;
-        uint8_t  amplitude :8;
-        uint16_t reserved  :7; 
+        bool     enable : 1;
+        uint8_t  feedback : 2;
+        uint8_t  mode : 7;
+        bool     buzz : 1;
+        uint8_t  dwell : 7;
+        bool     cont : 1;
+        uint8_t  amplitude : 8;
+        uint16_t reserved : 7;
     };
 } haptic_config_t;
 

drivers/haptic/solenoid.h

@@ -29,12 +29,8 @@
 #    define SOLENOID_MIN_DWELL 4
 #endif
 
-#ifndef SOLENOID_ACTIVE
-#    define SOLENOID_ACTIVE false
-#endif
-
 #ifndef SOLENOID_PIN
-#    define SOLENOID_PIN F6
+#    error SOLENOID_PIN not defined
 #endif
 
 void solenoid_buzz_on(void);

keyboards/1upkeyboards/sweet16/v1/rules.mk

@@ -1,5 +1,17 @@
+# MCU name
 MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
-LINK_TIME_OPTIMIZATION_ENABLE=yes
+
 RGBLIGHT_ENABLE = yes
-BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+
+LINK_TIME_OPTIMIZATION_ENABLE = yes

keyboards/1upkeyboards/sweet16/v2/promicro/rules.mk

@@ -1,6 +1,15 @@
+# MCU name
 MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
-LINK_TIME_OPTIMIZATION_ENABLE=yes
 
 ## Features
 CONSOLE_ENABLE = yes
@@ -8,3 +17,5 @@ CONSOLE_ENABLE = yes
 ## On a Pro Micro you have to choose between underglow and the rotary encoder.
 RGBLIGHT_ENABLE = no
 ENCODER_ENABLE = yes
+
+LINK_TIME_OPTIMIZATION_ENABLE = yes

keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk

@@ -1,3 +1,4 @@
+# MCU name
 MCU = STM32F303
 
 ## Features

keyboards/boston_meetup/2019/rules.mk

@@ -1,7 +1,5 @@
-# project specific files
-
-# Cortex version
-MCU  = STM32F303
+# MCU name
+MCU = STM32F303
 
 # Build Options
 #   comment out to disable the options.

keyboards/ckeys/thedora/rules.mk

@@ -1,3 +1,4 @@
+# MCU name
 MCU = STM32F303
 
 # Build Options

keyboards/clueboard/60/rules.mk

@@ -1,41 +1,5 @@
-# project specific files
-SRC =	led.c
-LAYOUTS += 60_ansi 60_ansi_split_bs_rshift 60_iso
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
+# MCU name
+MCU = STM32F303
 
 # Build Options
 #   comment out to disable the options.
@@ -48,3 +12,7 @@ CONSOLE_ENABLE = yes	  # Console for debug
 COMMAND_ENABLE = no     # Commands for debug and configuration
 NKRO_ENABLE = yes	      # USB Nkey Rollover
 AUDIO_ENABLE = yes
+
+# project specific files
+SRC =	led.c
+LAYOUTS += 60_ansi 60_ansi_split_bs_rshift 60_iso

keyboards/clueboard/66/rev4/rules.mk

@@ -1,19 +1,5 @@
-LAYOUTS = 66_ansi 66_iso
-
-## chip/board settings
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-MCU_LDSCRIPT = STM32F303xC
-MCU_STARTUP = stm32f3xx
-BOARD = GENERIC_STM32_F303XC
-MCU  = cortex-m4
-ARMV = 7
-USE_FPU = yes
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
+# MCU name
+MCU = STM32F303
 
 # Build Options
 #   comment out to disable the options.
@@ -31,3 +17,5 @@ MIDI_ENABLE = no        # MIDI controls
 UNICODE_ENABLE = no     # Unicode
 BLUETOOTH_ENABLE = no   # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = yes
+
+LAYOUTS = 66_ansi 66_iso

keyboards/clueboard/66_hotswap/gen1/rules.mk

@@ -1,43 +1,5 @@
-# project specific files
-SRC =	led.c
-LAYOUTS += 66_ansi
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
+# MCU name
+MCU = STM32F303
 
 # LED Configuration
 LED_MATRIX_ENABLE = IS31FL3731
@@ -57,3 +19,7 @@ NKRO_ENABLE = yes	    # USB Nkey Rollover
 #CUSTOM_MATRIX = yes # Custom matrix file
 AUDIO_ENABLE = yes
 # SERIAL_LINK_ENABLE = yes
+
+# project specific files
+SRC =	led.c
+LAYOUTS += 66_ansi

keyboards/clueboard/california/rules.mk

@@ -1,3 +1,4 @@
+# MCU name
 MCU = STM32F303
 
 ## Features

keyboards/crkbd/rev1/matrix.c

@@ -133,9 +133,8 @@ void rx_led_off(void)
 
 void matrix_init(void)
 {
-    debug_enable = true;
-    debug_matrix = true;
-    debug_mouse = true;
+    split_keyboard_setup();
+
     // initialize row and col
     unselect_rows();
     init_cols();

keyboards/crkbd/rev1/split_util.c

@@ -7,6 +7,11 @@
 #include "split_util.h"
 #include "matrix.h"
 #include "keyboard.h"
+#include "wait.h"
+
+#ifdef EE_HANDS
+#    include "eeconfig.h"
+#endif
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -14,19 +19,59 @@
 #  include "split_scomm.h"
 #endif
 
+#ifndef SPLIT_USB_TIMEOUT
+#    define SPLIT_USB_TIMEOUT 2500
+#endif
+
 volatile bool isLeftHand = true;
 
-static void setup_handedness(void) {
-  #ifdef EE_HANDS
-    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
-  #else
-    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
-    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
-      isLeftHand = !has_usb();
-    #else
-      isLeftHand = has_usb();
-    #endif
-  #endif
+bool waitForUsb(void) {
+    for (uint8_t i = 0; i < (SPLIT_USB_TIMEOUT / 100); i++) {
+        // This will return true of a USB connection has been established
+        if (UDADDR & _BV(ADDEN)) {
+            return true;
+        }
+        wait_ms(100);
+    }
+
+    // Avoid NO_USB_STARTUP_CHECK - Disable USB as the previous checks seem to enable it somehow
+    (USBCON &= ~(_BV(USBE) | _BV(OTGPADE)));
+
+    return false;
+}
+
+__attribute__((weak)) bool is_keyboard_left(void) {
+#if defined(SPLIT_HAND_PIN)
+    // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
+    setPinInput(SPLIT_HAND_PIN);
+    return readPin(SPLIT_HAND_PIN);
+#elif defined(EE_HANDS)
+    return eeconfig_read_handedness();
+#elif defined(MASTER_RIGHT)
+    return !is_keyboard_master();
+#endif
+
+    return is_keyboard_master();
+}
+
+__attribute__((weak)) bool is_keyboard_master(void) {
+    static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
+
+    // only check once, as this is called often
+    if (usbstate == UNKNOWN) {
+#if defined(SPLIT_USB_DETECT)
+        usbstate = waitForUsb() ? MASTER : SLAVE;
+#elif defined(__AVR__)
+        USBCON |= (1 << OTGPADE);  // enables VBUS pad
+        wait_us(5);
+
+        usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE;  // checks state of VBUS
+#else
+        usbstate = MASTER;
+#endif
+    }
+
+    return (usbstate == MASTER);
 }
 
 static void keyboard_master_setup(void) {
@@ -47,14 +92,9 @@ static void keyboard_slave_setup(void) {
 #endif
 }
 
-bool has_usb(void) {
-   USBCON |= (1 << OTGPADE); //enables VBUS pad
-   _delay_us(5);
-   return (USBSTA & (1<<VBUS));  //checks state of VBUS
-}
-
+// this code runs before the usb and keyboard is initialized
 void split_keyboard_setup(void) {
-   setup_handedness();
+    isLeftHand = is_keyboard_left();
 
    if (has_usb()) {
       keyboard_master_setup();
@@ -64,7 +104,7 @@ void split_keyboard_setup(void) {
    sei();
 }
 
-// this code runs before the usb and keyboard is initialized
-void matrix_setup(void) {
-    split_keyboard_setup();
+// backwards compat
+bool has_usb(void) {
+   return is_keyboard_master();
 }

keyboards/cutie_club/wraith/info.json

@@ -1,15 +1,180 @@
 {
-  "keyboard_name": "wraith",
-  "url": "",
-  "maintainer": "amberstarlight",
-  "width": 16,
-  "height": 6,
-	"layouts": {
-    "LAYOUT_ansi": {
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Prt Sc", "x":14, "y":0}, {"label":"Fn", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Insert", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Delete", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Pg Up", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"Pg Dn", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.5}, {"label":"Alt", "x":2.25, "y":5, "w":1.5}, {"x":3.75, "y":5, "w":7}, {"label":"Alt", "x":10.75, "y":5, "w":1.5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
-    },
-    "LAYOUT_iso": {
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Prt Sc", "x":14, "y":0}, {"label":"Fn", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"\"", "x":2, "y":1}, {"label":"\u00a3", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Insert", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2}, {"label":"Delete", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"@", "x":11.75, "y":3}, {"label":"~", "x":12.75, "y":3}, {"label":"Pg Up", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"label":"|", "x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"Pg Dn", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.5}, {"label":"Alt", "x":2.25, "y":5, "w":1.5}, {"x":3.75, "y":5, "w":7}, {"label":"Alt", "x":10.75, "y":5, "w":1.5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
+    "keyboard_name": "wraith",
+    "url": "",
+    "maintainer": "amberstarlight",
+    "width": 16,
+    "height": 6,
+    "layouts": {
+        "LAYOUT_ansi": {
+            "key_count": 80,
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"F1", "x":1.25, "y":0},
+                {"label":"F2", "x":2.25, "y":0},
+                {"label":"F3", "x":3.25, "y":0},
+                {"label":"F4", "x":4.25, "y":0},
+                {"label":"F5", "x":5.5, "y":0},
+                {"label":"F6", "x":6.5, "y":0},
+                {"label":"F7", "x":7.5, "y":0},
+                {"label":"F8", "x":8.5, "y":0},
+                {"label":"F9", "x":9.75, "y":0},
+                {"label":"F10", "x":10.75, "y":0},
+                {"label":"F11", "x":11.75, "y":0},
+                {"label":"F12", "x":12.75, "y":0},
+                {"label":"Prt Sc", "x":14, "y":0},
+                {"label":"Fn", "x":15, "y":0},
+                {"label":"~", "x":0, "y":1},
+                {"label":"!", "x":1, "y":1},
+                {"label":"@", "x":2, "y":1},
+                {"label":"#", "x":3, "y":1},
+                {"label":"$", "x":4, "y":1},
+                {"label":"%", "x":5, "y":1},
+                {"label":"^", "x":6, "y":1},
+                {"label":"&", "x":7, "y":1},
+                {"label":"*", "x":8, "y":1},
+                {"label":"(", "x":9, "y":1},
+                {"label":")", "x":10, "y":1},
+                {"label":"_", "x":11, "y":1},
+                {"label":"+", "x":12, "y":1},
+                {"label":"Backspace", "x":13, "y":1, "w":2},
+                {"label":"Insert", "x":15, "y":1},
+                {"label":"Tab", "x":0, "y":2, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2},
+                {"label":"W", "x":2.5, "y":2},
+                {"label":"E", "x":3.5, "y":2},
+                {"label":"R", "x":4.5, "y":2},
+                {"label":"T", "x":5.5, "y":2},
+                {"label":"Y", "x":6.5, "y":2},
+                {"label":"U", "x":7.5, "y":2},
+                {"label":"I", "x":8.5, "y":2},
+                {"label":"O", "x":9.5, "y":2},
+                {"label":"P", "x":10.5, "y":2},
+                {"label":"{", "x":11.5, "y":2},
+                {"label":"}", "x":12.5, "y":2},
+                {"label":"|", "x":13.5, "y":2, "w":1.5},
+                {"label":"Delete", "x":15, "y":2},
+                {"label":"Caps Lock", "x":0, "y":3, "w":1.75},
+                {"label":"A", "x":1.75, "y":3},
+                {"label":"S", "x":2.75, "y":3},
+                {"label":"D", "x":3.75, "y":3},
+                {"label":"F", "x":4.75, "y":3},
+                {"label":"G", "x":5.75, "y":3},
+                {"label":"H", "x":6.75, "y":3},
+                {"label":"J", "x":7.75, "y":3},
+                {"label":"K", "x":8.75, "y":3},
+                {"label":"L", "x":9.75, "y":3},
+                {"label":":", "x":10.75, "y":3},
+                {"label":"\"", "x":11.75, "y":3},
+                {"label":"Enter", "x":12.75, "y":3, "w":2.25},
+                {"label":"Pg Up", "x":15, "y":3},
+                {"label":"Shift", "x":0, "y":4, "w":2.25},
+                {"label":"Z", "x":2.25, "y":4},
+                {"label":"X", "x":3.25, "y":4},
+                {"label":"C", "x":4.25, "y":4},
+                {"label":"V", "x":5.25, "y":4},
+                {"label":"B", "x":6.25, "y":4},
+                {"label":"N", "x":7.25, "y":4},
+                {"label":"M", "x":8.25, "y":4},
+                {"label":"<", "x":9.25, "y":4},
+                {"label":">", "x":10.25, "y":4},
+                {"label":"?", "x":11.25, "y":4},
+                {"label":"Shift", "x":12.25, "y":4, "w":1.75},
+                {"label":"\u2191", "x":14, "y":4},
+                {"label":"Pg Dn", "x":15, "y":4},
+                {"label":"Ctrl", "x":0, "y":5, "w":1.5},
+                {"label":"Alt", "x":2.25, "y":5, "w":1.5},
+                {"x":3.75, "y":5, "w":7},
+                {"label":"Alt", "x":10.75, "y":5, "w":1.5},
+                {"label":"\u2190", "x":13, "y":5},
+                {"label":"\u2193", "x":14, "y":5},
+                {"label":"\u2192", "x":15, "y":5}
+            ]
+        },
+        "LAYOUT_iso": {
+            "key_count": 81,
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"F1", "x":1.25, "y":0},
+                {"label":"F2", "x":2.25, "y":0},
+                {"label":"F3", "x":3.25, "y":0},
+                {"label":"F4", "x":4.25, "y":0},
+                {"label":"F5", "x":5.5, "y":0},
+                {"label":"F6", "x":6.5, "y":0},
+                {"label":"F7", "x":7.5, "y":0},
+                {"label":"F8", "x":8.5, "y":0},
+                {"label":"F9", "x":9.75, "y":0},
+                {"label":"F10", "x":10.75, "y":0},
+                {"label":"F11", "x":11.75, "y":0},
+                {"label":"F12", "x":12.75, "y":0},
+                {"label":"Prt Sc", "x":14, "y":0},
+                {"label":"Fn", "x":15, "y":0},
+                {"label":"~", "x":0, "y":1},
+                {"label":"!", "x":1, "y":1},
+                {"label":"\"", "x":2, "y":1},
+                {"label":"\u00a3", "x":3, "y":1},
+                {"label":"$", "x":4, "y":1},
+                {"label":"%", "x":5, "y":1},
+                {"label":"^", "x":6, "y":1},
+                {"label":"&", "x":7, "y":1},
+                {"label":"*", "x":8, "y":1},
+                {"label":"(", "x":9, "y":1},
+                {"label":")", "x":10, "y":1},
+                {"label":"_", "x":11, "y":1},
+                {"label":"+", "x":12, "y":1},
+                {"label":"Backspace", "x":13, "y":1, "w":2},
+                {"label":"Insert", "x":15, "y":1},
+                {"label":"Tab", "x":0, "y":2, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2},
+                {"label":"W", "x":2.5, "y":2},
+                {"label":"E", "x":3.5, "y":2},
+                {"label":"R", "x":4.5, "y":2},
+                {"label":"T", "x":5.5, "y":2},
+                {"label":"Y", "x":6.5, "y":2},
+                {"label":"U", "x":7.5, "y":2},
+                {"label":"I", "x":8.5, "y":2},
+                {"label":"O", "x":9.5, "y":2},
+                {"label":"P", "x":10.5, "y":2},
+                {"label":"{", "x":11.5, "y":2},
+                {"label":"}", "x":12.5, "y":2},
+                {"label":"Delete", "x":15, "y":2},
+                {"label":"Caps Lock", "x":0, "y":3, "w":1.75},
+                {"label":"A", "x":1.75, "y":3},
+                {"label":"S", "x":2.75, "y":3},
+                {"label":"D", "x":3.75, "y":3},
+                {"label":"F", "x":4.75, "y":3},
+                {"label":"G", "x":5.75, "y":3},
+                {"label":"H", "x":6.75, "y":3},
+                {"label":"J", "x":7.75, "y":3},
+                {"label":"K", "x":8.75, "y":3},
+                {"label":"L", "x":9.75, "y":3},
+                {"label":":", "x":10.75, "y":3},
+                {"label":"@", "x":11.75, "y":3},
+                {"label":"~", "x":12.75, "y":3},
+                {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2},
+                {"label":"Pg Up", "x":15, "y":3},
+                {"label":"Shift", "x":0, "y":4, "w":1.25},
+                {"label":"|", "x":1.25, "y":4},
+                {"label":"Z", "x":2.25, "y":4},
+                {"label":"X", "x":3.25, "y":4},
+                {"label":"C", "x":4.25, "y":4},
+                {"label":"V", "x":5.25, "y":4},
+                {"label":"B", "x":6.25, "y":4},
+                {"label":"N", "x":7.25, "y":4},
+                {"label":"M", "x":8.25, "y":4},
+                {"label":"<", "x":9.25, "y":4},
+                {"label":">", "x":10.25, "y":4},
+                {"label":"?", "x":11.25, "y":4},
+                {"label":"Shift", "x":12.25, "y":4, "w":1.75},
+                {"label":"\u2191", "x":14, "y":4},
+                {"label":"Pg Dn", "x":15, "y":4},
+                {"label":"Ctrl", "x":0, "y":5, "w":1.5},
+                {"label":"Alt", "x":2.25, "y":5, "w":1.5},
+                {"x":3.75, "y":5, "w":7},
+                {"label":"Alt", "x":10.75, "y":5, "w":1.5},
+                {"label":"\u2190", "x":13, "y":5},
+                {"label":"\u2193", "x":14, "y":5},
+                {"label":"\u2192", "x":15, "y":5}
+            ]
+        }
     }
-  }
 }

keyboards/dz60/rules.mk

@@ -25,4 +25,4 @@ BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes
 
-LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso
+LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso 60_abnt2

keyboards/dztech/dz60rgb/info.json

@@ -1,13 +1,13 @@
 {
-  "keyboard_name": "dz60rgb",
-  "url": "",
-  "maintainer": "dztch",
-  "width": 14,
-  "height": 5,
-  "layouts": {
+    "keyboard_name": "DZ60RGB",
+    "url": "",
+    "maintainer": "dztech",
+    "width": 15,
+    "height": 5,
+    "layouts": {
         "LAYOUT": {
             "key_count": 63,
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"\u2191", "x":13, "y":3},{"label":"?", "x":14, "y":3},	{"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Ctrl", "x":11, "y":4}, {"label":"\u2190", "x":12, "y":4}, {"label":"\u2193", "x":13, "y":4}, {"label":"\u2192", "x":14, "y":4}]
-        },
+        }
     }
 }

keyboards/dztech/dz60rgb/rules.mk

@@ -1,6 +1,6 @@
-MCU  = STM32F303
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
+# MCU name
+MCU = STM32F303
+
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys
@@ -11,4 +11,4 @@ COMMAND_ENABLE = no                # Commands for debug and configuration
 NKRO_ENABLE = no                 # USB Nkey Rollover
 AUDIO_ENABLE = no
 RGB_MATRIX_ENABLE = IS31FL3733     # Use RGB matrix
-NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
+NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in

keyboards/dztech/dz60rgb_ansi/rules.mk

@@ -1,6 +1,6 @@
-MCU  = STM32F303
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
+# MCU name
+MCU = STM32F303
+
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys
@@ -13,4 +13,4 @@ AUDIO_ENABLE = no
 RGB_MATRIX_ENABLE = IS31FL3733     # Use RGB matrix
 NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
 
-LAYOUTS = 60_ansi
+LAYOUTS = 60_ansi

keyboards/dztech/dz65rgb/rules.mk

@@ -1,6 +1,6 @@
-MCU  = STM32F303
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
+# MCU name
+MCU = STM32F303
+
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys

keyboards/gh60/revc/info.json

@@ -9,417 +9,38 @@
     "height": 5,
     "layouts": {
         "LAYOUT_all": {
-            "key_count": 65,
-            "layout": [
-                {"label":"~", "x":0, "y":0},
-                {"label":"!", "x":1, "y":0},
-                {"label":"@", "x":2, "y":0},
-                {"label":"#", "x":3, "y":0},
-                {"label":"$", "x":4, "y":0},
-                {"label":"%", "x":5, "y":0},
-                {"label":"^", "x":6, "y":0},
-                {"label":"&", "x":7, "y":0},
-                {"label":"*", "x":8, "y":0},
-                {"label":"(", "x":9, "y":0},
-                {"label":")", "x":10, "y":0},
-                {"label":"_", "x":11, "y":0},
-                {"label":"+", "x":12, "y":0},
-                {"label":"Backspace", "x":13, "y":0},
-                {"label":"Backspace Extra", "x":14, "y":0},
-                {"label":"Tab", "x":0, "y":1, "w":1.5},
-                {"label":"Q", "x":1.5, "y":1},
-                {"label":"W", "x":2.5, "y":1},
-                {"label":"E", "x":3.5, "y":1},
-                {"label":"R", "x":4.5, "y":1},
-                {"label":"T", "x":5.5, "y":1},
-                {"label":"Y", "x":6.5, "y":1},
-                {"label":"U", "x":7.5, "y":1},
-                {"label":"I", "x":8.5, "y":1},
-                {"label":"O", "x":9.5, "y":1},
-                {"label":"P", "x":10.5, "y":1},
-                {"label":"{", "x":11.5, "y":1},
-                {"label":"}", "x":12.5, "y":1},
-                {"label":"|", "x":13.5, "y":1, "w":1.5},
-                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
-                {"label":"A", "x":1.75, "y":2},
-                {"label":"S", "x":2.75, "y":2},
-                {"label":"D", "x":3.75, "y":2},
-                {"label":"F", "x":4.75, "y":2},
-                {"label":"G", "x":5.75, "y":2},
-                {"label":"H", "x":6.75, "y":2},
-                {"label":"J", "x":7.75, "y":2},
-                {"label":"K", "x":8.75, "y":2},
-                {"label":"L", "x":9.75, "y":2},
-                {"label":":", "x":10.75, "y":2},
-                {"label":"\"", "x":11.75, "y":2},
-                {"label":"ISO Hash", "x":12.75, "y":2},
-                {"label":"Enter", "x":13.75, "y":2, "w":1.25},
-                {"label":"Shift", "x":0, "y":3, "w":1.25},
-                {"label":"ISO Backslash", "x":1.25, "y":3},
-                {"label":"Z", "x":2.25, "y":3},
-                {"label":"X", "x":3.25, "y":3},
-                {"label":"C", "x":4.25, "y":3},
-                {"label":"V", "x":5.25, "y":3},
-                {"label":"B", "x":6.25, "y":3},
-                {"label":"N", "x":7.25, "y":3},
-                {"label":"M", "x":8.25, "y":3},
-                {"label":"<", "x":9.25, "y":3},
-                {"label":">", "x":10.25, "y":3},
-                {"label":"?", "x":11.25, "y":3},
-                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
-                {"label":"HHKB Fn", "x":14, "y":3},
-                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
-                {"label":"Win", "x":1.25, "y":4, "w":1.25},
-                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
-                {"label":"Space", "x":3.75, "y":4, "w":6.25},
-                {"label":"Alt", "x":10, "y":4, "w":1.25},
-                {"label":"Win", "x":11.25, "y":4, "w":1.25},
-                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
-                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
-            ]
+            "key_count":65,
+            "layout": [{"label":"~","x":0,"y":0},{"label":"!","x":1,"y":0},{"label":"@","x":2,"y":0},{"label":"#","x":3,"y":0},{"label":"$","x":4,"y":0},{"label":"%","x":5,"y":0},{"label":"^","x":6,"y":0},{"label":"&","x":7,"y":0},{"label":"*","x":8,"y":0},{"label":"(","x":9,"y":0},{"label":")","x":10,"y":0},{"label":"_","x":11,"y":0},{"label":"+","x":12,"y":0},{"label":"Backspace","x":13,"y":0},{"label":"Backspace Extra","x":14,"y":0},{"label":"Tab","x":0,"y":1,"w":1.5},{"label":"Q","x":1.5,"y":1},{"label":"W","x":2.5,"y":1},{"label":"E","x":3.5,"y":1},{"label":"R","x":4.5,"y":1},{"label":"T","x":5.5,"y":1},{"label":"Y","x":6.5,"y":1},{"label":"U","x":7.5,"y":1},{"label":"I","x":8.5,"y":1},{"label":"O","x":9.5,"y":1},{"label":"P","x":10.5,"y":1},{"label":"{","x":11.5,"y":1},{"label":"}","x":12.5,"y":1},{"label":"|","x":13.5,"y":1,"w":1.5},{"label":"Caps Lock","x":0,"y":2,"w":1.75},{"label":"A","x":1.75,"y":2},{"label":"S","x":2.75,"y":2},{"label":"D","x":3.75,"y":2},{"label":"F","x":4.75,"y":2},{"label":"G","x":5.75,"y":2},{"label":"H","x":6.75,"y":2},{"label":"J","x":7.75,"y":2},{"label":"K","x":8.75,"y":2},{"label":"L","x":9.75,"y":2},{"label":":","x":10.75,"y":2},{"label":"\"","x":11.75,"y":2},{"label":"ISO Hash","x":12.75,"y":2},{"label":"Enter","x":13.75,"y":2,"w":1.25},{"label":"Shift","x":0,"y":3,"w":1.25},{"label":"ISO Backslash","x":1.25,"y":3},{"label":"Z","x":2.25,"y":3},{"label":"X","x":3.25,"y":3},{"label":"C","x":4.25,"y":3},{"label":"V","x":5.25,"y":3},{"label":"B","x":6.25,"y":3},{"label":"N","x":7.25,"y":3},{"label":"M","x":8.25,"y":3},{"label":"<","x":9.25,"y":3},{"label":">","x":10.25,"y":3},{"label":"?","x":11.25,"y":3},{"label":"Shift","x":12.25,"y":3,"w":1.75},{"label":"HHKB Fn","x":14,"y":3},{"label":"Ctrl","x":0,"y":4,"w":1.25},{"label":"Win","x":1.25,"y":4,"w":1.25},{"label":"Alt","x":2.5,"y":4,"w":1.25},{"label":"Space","x":3.75,"y":4,"w":6.25},{"label":"Alt","x":10,"y":4,"w":1.25},{"label":"Win","x":11.25,"y":4,"w":1.25},{"label":"Menu","x":12.5,"y":4,"w":1.25},{"label":"Ctrl","x":13.75,"y":4,"w":1.25}]
         },
 
         "LAYOUT": {
-            "key_count": 65,
-            "layout": [
-                {"label":"~", "x":0, "y":0},
-                {"label":"!", "x":1, "y":0},
-                {"label":"@", "x":2, "y":0},
-                {"label":"#", "x":3, "y":0},
-                {"label":"$", "x":4, "y":0},
-                {"label":"%", "x":5, "y":0},
-                {"label":"^", "x":6, "y":0},
-                {"label":"&", "x":7, "y":0},
-                {"label":"*", "x":8, "y":0},
-                {"label":"(", "x":9, "y":0},
-                {"label":")", "x":10, "y":0},
-                {"label":"_", "x":11, "y":0},
-                {"label":"+", "x":12, "y":0},
-                {"label":"Backspace", "x":13, "y":0},
-                {"label":"Tab", "x":0, "y":1, "w":1.5},
-                {"label":"Q", "x":1.5, "y":1},
-                {"label":"W", "x":2.5, "y":1},
-                {"label":"E", "x":3.5, "y":1},
-                {"label":"R", "x":4.5, "y":1},
-                {"label":"T", "x":5.5, "y":1},
-                {"label":"Y", "x":6.5, "y":1},
-                {"label":"U", "x":7.5, "y":1},
-                {"label":"I", "x":8.5, "y":1},
-                {"label":"O", "x":9.5, "y":1},
-                {"label":"P", "x":10.5, "y":1},
-                {"label":"{", "x":11.5, "y":1},
-                {"label":"}", "x":12.5, "y":1},
-                {"label":"|", "x":13.5, "y":1, "w":1.5},
-                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
-                {"label":"A", "x":1.75, "y":2},
-                {"label":"S", "x":2.75, "y":2},
-                {"label":"D", "x":3.75, "y":2},
-                {"label":"F", "x":4.75, "y":2},
-                {"label":"G", "x":5.75, "y":2},
-                {"label":"H", "x":6.75, "y":2},
-                {"label":"J", "x":7.75, "y":2},
-                {"label":"K", "x":8.75, "y":2},
-                {"label":"L", "x":9.75, "y":2},
-                {"label":":", "x":10.75, "y":2},
-                {"label":"\"", "x":11.75, "y":2},
-                {"label":"ISO Hash", "x":12.75, "y":2},
-                {"label":"Enter", "x":13.75, "y":2, "w":1.25},
-                {"label":"Shift", "x":0, "y":3, "w":1.25},
-                {"label":"ISO Backslash", "x":1.25, "y":3},
-                {"label":"Z", "x":2.25, "y":3},
-                {"label":"X", "x":3.25, "y":3},
-                {"label":"C", "x":4.25, "y":3},
-                {"label":"V", "x":5.25, "y":3},
-                {"label":"B", "x":6.25, "y":3},
-                {"label":"N", "x":7.25, "y":3},
-                {"label":"M", "x":8.25, "y":3},
-                {"label":"<", "x":9.25, "y":3},
-                {"label":">", "x":10.25, "y":3},
-                {"label":"?", "x":11.25, "y":3},
-                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
-                {"label":"HHKB Fn", "x":14, "y":3},
-                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
-                {"label":"Win", "x":1.25, "y":4, "w":1.25},
-                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
-                {"label":"Space", "x":3.75, "y":4, "w":6.25},
-                {"label":"Backspace Extra", "x":14, "y":0},
-                {"label":"Alt", "x":10, "y":4, "w":1.25},
-                {"label":"Win", "x":11.25, "y":4, "w":1.25},
-                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
-                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
-            ]
+            "key_count":65,
+            "layout": [{"label":"~","x":0,"y":0},{"label":"!","x":1,"y":0},{"label":"@","x":2,"y":0},{"label":"#","x":3,"y":0},{"label":"$","x":4,"y":0},{"label":"%","x":5,"y":0},{"label":"^","x":6,"y":0},{"label":"&","x":7,"y":0},{"label":"*","x":8,"y":0},{"label":"(","x":9,"y":0},{"label":")","x":10,"y":0},{"label":"_","x":11,"y":0},{"label":"+","x":12,"y":0},{"label":"Backspace","x":13,"y":0},{"label":"Tab","x":0,"y":1,"w":1.5},{"label":"Q","x":1.5,"y":1},{"label":"W","x":2.5,"y":1},{"label":"E","x":3.5,"y":1},{"label":"R","x":4.5,"y":1},{"label":"T","x":5.5,"y":1},{"label":"Y","x":6.5,"y":1},{"label":"U","x":7.5,"y":1},{"label":"I","x":8.5,"y":1},{"label":"O","x":9.5,"y":1},{"label":"P","x":10.5,"y":1},{"label":"{","x":11.5,"y":1},{"label":"}","x":12.5,"y":1},{"label":"|","x":13.5,"y":1,"w":1.5},{"label":"Caps Lock","x":0,"y":2,"w":1.75},{"label":"A","x":1.75,"y":2},{"label":"S","x":2.75,"y":2},{"label":"D","x":3.75,"y":2},{"label":"F","x":4.75,"y":2},{"label":"G","x":5.75,"y":2},{"label":"H","x":6.75,"y":2},{"label":"J","x":7.75,"y":2},{"label":"K","x":8.75,"y":2},{"label":"L","x":9.75,"y":2},{"label":":","x":10.75,"y":2},{"label":"\"","x":11.75,"y":2},{"label":"ISO Hash","x":12.75,"y":2},{"label":"Enter","x":13.75,"y":2,"w":1.25},{"label":"Shift","x":0,"y":3,"w":1.25},{"label":"ISO Backslash","x":1.25,"y":3},{"label":"Z","x":2.25,"y":3},{"label":"X","x":3.25,"y":3},{"label":"C","x":4.25,"y":3},{"label":"V","x":5.25,"y":3},{"label":"B","x":6.25,"y":3},{"label":"N","x":7.25,"y":3},{"label":"M","x":8.25,"y":3},{"label":"<","x":9.25,"y":3},{"label":">","x":10.25,"y":3},{"label":"?","x":11.25,"y":3},{"label":"Shift","x":12.25,"y":3,"w":1.75},{"label":"HHKB Fn","x":14,"y":3},{"label":"Ctrl","x":0,"y":4,"w":1.25},{"label":"Win","x":1.25,"y":4,"w":1.25},{"label":"Alt","x":2.5,"y":4,"w":1.25},{"label":"Space","x":3.75,"y":4,"w":6.25},{"label":"Backspace Extra","x":14,"y":0},{"label":"Alt","x":10,"y":4,"w":1.25},{"label":"Win","x":11.25,"y":4,"w":1.25},{"label":"Menu","x":12.5,"y":4,"w":1.25},{"label":"Ctrl","x":13.75,"y":4,"w":1.25}]
         },
 
         "LAYOUT_60_ansi": {
-            "key_count": 61,
-            "layout": [
-                {"label":"~", "x":0, "y":0},
-                {"label":"!", "x":1, "y":0},
-                {"label":"@", "x":2, "y":0},
-                {"label":"#", "x":3, "y":0},
-                {"label":"$", "x":4, "y":0},
-                {"label":"%", "x":5, "y":0},
-                {"label":"^", "x":6, "y":0},
-                {"label":"&", "x":7, "y":0},
-                {"label":"*", "x":8, "y":0},
-                {"label":"(", "x":9, "y":0},
-                {"label":")", "x":10, "y":0},
-                {"label":"_", "x":11, "y":0},
-                {"label":"+", "x":12, "y":0},
-                {"label":"Backspace", "x":13, "y":0, "w":2},
-                {"label":"Tab", "x":0, "y":1, "w":1.5},
-                {"label":"Q", "x":1.5, "y":1},
-                {"label":"W", "x":2.5, "y":1},
-                {"label":"E", "x":3.5, "y":1},
-                {"label":"R", "x":4.5, "y":1},
-                {"label":"T", "x":5.5, "y":1},
-                {"label":"Y", "x":6.5, "y":1},
-                {"label":"U", "x":7.5, "y":1},
-                {"label":"I", "x":8.5, "y":1},
-                {"label":"O", "x":9.5, "y":1},
-                {"label":"P", "x":10.5, "y":1},
-                {"label":"{", "x":11.5, "y":1},
-                {"label":"}", "x":12.5, "y":1},
-                {"label":"|", "x":13.5, "y":1, "w":1.5},
-                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
-                {"label":"A", "x":1.75, "y":2},
-                {"label":"S", "x":2.75, "y":2},
-                {"label":"D", "x":3.75, "y":2},
-                {"label":"F", "x":4.75, "y":2},
-                {"label":"G", "x":5.75, "y":2},
-                {"label":"H", "x":6.75, "y":2},
-                {"label":"J", "x":7.75, "y":2},
-                {"label":"K", "x":8.75, "y":2},
-                {"label":"L", "x":9.75, "y":2},
-                {"label":":", "x":10.75, "y":2},
-                {"label":"\"", "x":11.75, "y":2},
-                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
-                {"label":"Shift", "x":0, "y":3, "w":2.25},
-                {"label":"Z", "x":2.25, "y":3},
-                {"label":"X", "x":3.25, "y":3},
-                {"label":"C", "x":4.25, "y":3},
-                {"label":"V", "x":5.25, "y":3},
-                {"label":"B", "x":6.25, "y":3},
-                {"label":"N", "x":7.25, "y":3},
-                {"label":"M", "x":8.25, "y":3},
-                {"label":"<", "x":9.25, "y":3},
-                {"label":">", "x":10.25, "y":3},
-                {"label":"?", "x":11.25, "y":3},
-                {"label":"Shift", "x":12.25, "y":3, "w":2.75},
-                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
-                {"label":"Win", "x":1.25, "y":4, "w":1.25},
-                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
-                {"label":"Space", "x":3.75, "y":4, "w":6.25},
-                {"label":"Alt", "x":10, "y":4, "w":1.25},
-                {"label":"Win", "x":11.25, "y":4, "w":1.25},
-                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
-                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
-            ]
+            "key_count":61,
+            "layout": [{"label":"~","x":0,"y":0},{"label":"!","x":1,"y":0},{"label":"@","x":2,"y":0},{"label":"#","x":3,"y":0},{"label":"$","x":4,"y":0},{"label":"%","x":5,"y":0},{"label":"^","x":6,"y":0},{"label":"&","x":7,"y":0},{"label":"*","x":8,"y":0},{"label":"(","x":9,"y":0},{"label":")","x":10,"y":0},{"label":"_","x":11,"y":0},{"label":"+","x":12,"y":0},{"label":"Backspace","x":13,"y":0,"w":2},{"label":"Tab","x":0,"y":1,"w":1.5},{"label":"Q","x":1.5,"y":1},{"label":"W","x":2.5,"y":1},{"label":"E","x":3.5,"y":1},{"label":"R","x":4.5,"y":1},{"label":"T","x":5.5,"y":1},{"label":"Y","x":6.5,"y":1},{"label":"U","x":7.5,"y":1},{"label":"I","x":8.5,"y":1},{"label":"O","x":9.5,"y":1},{"label":"P","x":10.5,"y":1},{"label":"{","x":11.5,"y":1},{"label":"}","x":12.5,"y":1},{"label":"|","x":13.5,"y":1,"w":1.5},{"label":"Caps Lock","x":0,"y":2,"w":1.75},{"label":"A","x":1.75,"y":2},{"label":"S","x":2.75,"y":2},{"label":"D","x":3.75,"y":2},{"label":"F","x":4.75,"y":2},{"label":"G","x":5.75,"y":2},{"label":"H","x":6.75,"y":2},{"label":"J","x":7.75,"y":2},{"label":"K","x":8.75,"y":2},{"label":"L","x":9.75,"y":2},{"label":":","x":10.75,"y":2},{"label":"\"","x":11.75,"y":2},{"label":"Enter","x":12.75,"y":2,"w":2.25},{"label":"Shift","x":0,"y":3,"w":2.25},{"label":"Z","x":2.25,"y":3},{"label":"X","x":3.25,"y":3},{"label":"C","x":4.25,"y":3},{"label":"V","x":5.25,"y":3},{"label":"B","x":6.25,"y":3},{"label":"N","x":7.25,"y":3},{"label":"M","x":8.25,"y":3},{"label":"<","x":9.25,"y":3},{"label":">","x":10.25,"y":3},{"label":"?","x":11.25,"y":3},{"label":"Shift","x":12.25,"y":3,"w":2.75},{"label":"Ctrl","x":0,"y":4,"w":1.25},{"label":"Win","x":1.25,"y":4,"w":1.25},{"label":"Alt","x":2.5,"y":4,"w":1.25},{"label":"Space","x":3.75,"y":4,"w":6.25},{"label":"Alt","x":10,"y":4,"w":1.25},{"label":"Win","x":11.25,"y":4,"w":1.25},{"label":"Menu","x":12.5,"y":4,"w":1.25},{"label":"Ctrl","x":13.75,"y":4,"w":1.25}]
         },
 
         "LAYOUT_60_iso": {
-            "key_count": 62,
-            "layout": [
-                {"label":"\u00ac", "x":0, "y":0},
-                {"label":"!", "x":1, "y":0},
-                {"label":"\"", "x":2, "y":0},
-                {"label":"\u00a3", "x":3, "y":0},
-                {"label":"$", "x":4, "y":0},
-                {"label":"%", "x":5, "y":0},
-                {"label":"^", "x":6, "y":0},
-                {"label":"&", "x":7, "y":0},
-                {"label":"*", "x":8, "y":0},
-                {"label":"(", "x":9, "y":0},
-                {"label":")", "x":10, "y":0},
-                {"label":"_", "x":11, "y":0},
-                {"label":"+", "x":12, "y":0},
-                {"label":"Backspace", "x":13, "y":0, "w":2},
-                {"label":"Tab", "x":0, "y":1, "w":1.5},
-                {"label":"Q", "x":1.5, "y":1},
-                {"label":"W", "x":2.5, "y":1},
-                {"label":"E", "x":3.5, "y":1},
-                {"label":"R", "x":4.5, "y":1},
-                {"label":"T", "x":5.5, "y":1},
-                {"label":"Y", "x":6.5, "y":1},
-                {"label":"U", "x":7.5, "y":1},
-                {"label":"I", "x":8.5, "y":1},
-                {"label":"O", "x":9.5, "y":1},
-                {"label":"P", "x":10.5, "y":1},
-                {"label":"{", "x":11.5, "y":1},
-                {"label":"}", "x":12.5, "y":1},
-                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
-                {"label":"A", "x":1.75, "y":2},
-                {"label":"S", "x":2.75, "y":2},
-                {"label":"D", "x":3.75, "y":2},
-                {"label":"F", "x":4.75, "y":2},
-                {"label":"G", "x":5.75, "y":2},
-                {"label":"H", "x":6.75, "y":2},
-                {"label":"J", "x":7.75, "y":2},
-                {"label":"K", "x":8.75, "y":2},
-                {"label":"L", "x":9.75, "y":2},
-                {"label":":", "x":10.75, "y":2},
-                {"label":"@", "x":11.75, "y":2},
-                {"label":"~", "x":12.75, "y":2},
-                {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
-                {"label":"Shift", "x":0, "y":3, "w":1.25},
-                {"label":"|", "x":1.25, "y":3},
-                {"label":"Z", "x":2.25, "y":3},
-                {"label":"X", "x":3.25, "y":3},
-                {"label":"C", "x":4.25, "y":3},
-                {"label":"V", "x":5.25, "y":3},
-                {"label":"B", "x":6.25, "y":3},
-                {"label":"N", "x":7.25, "y":3},
-                {"label":"M", "x":8.25, "y":3},
-                {"label":"<", "x":9.25, "y":3},
-                {"label":">", "x":10.25, "y":3},
-                {"label":"?", "x":11.25, "y":3},
-                {"label":"Shift", "x":12.25, "y":3, "w":2.75},
-                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
-                {"label":"Win", "x":1.25, "y":4, "w":1.25},
-                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
-                {"label":"Space", "x":3.75, "y":4, "w":6.25},
-                {"label":"AltGr", "x":10, "y":4, "w":1.25},
-                {"label":"Win", "x":11.25, "y":4, "w":1.25},
-                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
-                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
-            ]
+            "key_count":62,
+            "layout": [{"label":"\u00ac","x":0,"y":0},{"label":"!","x":1,"y":0},{"label":"\"","x":2,"y":0},{"label":"\u00a3","x":3,"y":0},{"label":"$","x":4,"y":0},{"label":"%","x":5,"y":0},{"label":"^","x":6,"y":0},{"label":"&","x":7,"y":0},{"label":"*","x":8,"y":0},{"label":"(","x":9,"y":0},{"label":")","x":10,"y":0},{"label":"_","x":11,"y":0},{"label":"+","x":12,"y":0},{"label":"Backspace","x":13,"y":0,"w":2},{"label":"Tab","x":0,"y":1,"w":1.5},{"label":"Q","x":1.5,"y":1},{"label":"W","x":2.5,"y":1},{"label":"E","x":3.5,"y":1},{"label":"R","x":4.5,"y":1},{"label":"T","x":5.5,"y":1},{"label":"Y","x":6.5,"y":1},{"label":"U","x":7.5,"y":1},{"label":"I","x":8.5,"y":1},{"label":"O","x":9.5,"y":1},{"label":"P","x":10.5,"y":1},{"label":"{","x":11.5,"y":1},{"label":"}","x":12.5,"y":1},{"label":"Enter","x":13.75,"y":1,"w":1.25,"h":2},{"label":"Caps Lock","x":0,"y":2,"w":1.75},{"label":"A","x":1.75,"y":2},{"label":"S","x":2.75,"y":2},{"label":"D","x":3.75,"y":2},{"label":"F","x":4.75,"y":2},{"label":"G","x":5.75,"y":2},{"label":"H","x":6.75,"y":2},{"label":"J","x":7.75,"y":2},{"label":"K","x":8.75,"y":2},{"label":"L","x":9.75,"y":2},{"label":":","x":10.75,"y":2},{"label":"@","x":11.75,"y":2},{"label":"~","x":12.75,"y":2},{"label":"Shift","x":0,"y":3,"w":1.25},{"label":"|","x":1.25,"y":3},{"label":"Z","x":2.25,"y":3},{"label":"X","x":3.25,"y":3},{"label":"C","x":4.25,"y":3},{"label":"V","x":5.25,"y":3},{"label":"B","x":6.25,"y":3},{"label":"N","x":7.25,"y":3},{"label":"M","x":8.25,"y":3},{"label":"<","x":9.25,"y":3},{"label":">","x":10.25,"y":3},{"label":"?","x":11.25,"y":3},{"label":"Shift","x":12.25,"y":3,"w":2.75},{"label":"Ctrl","x":0,"y":4,"w":1.25},{"label":"Win","x":1.25,"y":4,"w":1.25},{"label":"Alt","x":2.5,"y":4,"w":1.25},{"label":"Space","x":3.75,"y":4,"w":6.25},{"label":"AltGr","x":10,"y":4,"w":1.25},{"label":"Win","x":11.25,"y":4,"w":1.25},{"label":"Menu","x":12.5,"y":4,"w":1.25},{"label":"Ctrl","x":13.75,"y":4,"w":1.25}]
         },
 
         "LAYOUT_60_ansi_split_bs_rshift": {
-            "key_count": 63,
-            "layout": [
-                {"label":"~", "x":0, "y":0},
-                {"label":"!", "x":1, "y":0},
-                {"label":"@", "x":2, "y":0},
-                {"label":"#", "x":3, "y":0},
-                {"label":"$", "x":4, "y":0},
-                {"label":"%", "x":5, "y":0},
-                {"label":"^", "x":6, "y":0},
-                {"label":"&", "x":7, "y":0},
-                {"label":"*", "x":8, "y":0},
-                {"label":"(", "x":9, "y":0},
-                {"label":")", "x":10, "y":0},
-                {"label":"_", "x":11, "y":0},
-                {"label":"+", "x":12, "y":0},
-                {"label":"Backspace", "x":13, "y":0},
-                {"label":"Backspace Extra", "x":14, "y":0},
-                {"label":"Tab", "x":0, "y":1, "w":1.5},
-                {"label":"Q", "x":1.5, "y":1},
-                {"label":"W", "x":2.5, "y":1},
-                {"label":"E", "x":3.5, "y":1},
-                {"label":"R", "x":4.5, "y":1},
-                {"label":"T", "x":5.5, "y":1},
-                {"label":"Y", "x":6.5, "y":1},
-                {"label":"U", "x":7.5, "y":1},
-                {"label":"I", "x":8.5, "y":1},
-                {"label":"O", "x":9.5, "y":1},
-                {"label":"P", "x":10.5, "y":1},
-                {"label":"{", "x":11.5, "y":1},
-                {"label":"}", "x":12.5, "y":1},
-                {"label":"|", "x":13.5, "y":1, "w":1.5},
-                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
-                {"label":"A", "x":1.75, "y":2},
-                {"label":"S", "x":2.75, "y":2},
-                {"label":"D", "x":3.75, "y":2},
-                {"label":"F", "x":4.75, "y":2},
-                {"label":"G", "x":5.75, "y":2},
-                {"label":"H", "x":6.75, "y":2},
-                {"label":"J", "x":7.75, "y":2},
-                {"label":"K", "x":8.75, "y":2},
-                {"label":"L", "x":9.75, "y":2},
-                {"label":":", "x":10.75, "y":2},
-                {"label":"\"", "x":11.75, "y":2},
-                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
-                {"label":"Shift", "x":0, "y":3, "w":2.25},
-                {"label":"Z", "x":2.25, "y":3},
-                {"label":"X", "x":3.25, "y":3},
-                {"label":"C", "x":4.25, "y":3},
-                {"label":"V", "x":5.25, "y":3},
-                {"label":"B", "x":6.25, "y":3},
-                {"label":"N", "x":7.25, "y":3},
-                {"label":"M", "x":8.25, "y":3},
-                {"label":"<", "x":9.25, "y":3},
-                {"label":">", "x":10.25, "y":3},
-                {"label":"?", "x":11.25, "y":3},
-                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
-                {"label":"HHKB Fn", "x":14, "y":3},
-                {"label":"Ctrl", "x":0, "y":4, "w":1.5},
-                {"label":"Win", "x":1.5, "y":4},
-                {"label":"Alt", "x":2.5, "y":4, "w":1.5},
-                {"label":"Space", "x":4, "y":4, "w":6},
-                {"label":"Alt", "x":10, "y":4, "w":1.5},
-                {"label":"Win", "x":11.5, "y":4},
-                {"label":"Menu", "x":12.5, "y":4},
-                {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}
-            ]
+            "key_count":63,
+            "layout": [{"label":"~","x":0,"y":0},{"label":"!","x":1,"y":0},{"label":"@","x":2,"y":0},{"label":"#","x":3,"y":0},{"label":"$","x":4,"y":0},{"label":"%","x":5,"y":0},{"label":"^","x":6,"y":0},{"label":"&","x":7,"y":0},{"label":"*","x":8,"y":0},{"label":"(","x":9,"y":0},{"label":")","x":10,"y":0},{"label":"_","x":11,"y":0},{"label":"+","x":12,"y":0},{"label":"Backspace","x":13,"y":0},{"label":"Backspace Extra","x":14,"y":0},{"label":"Tab","x":0,"y":1,"w":1.5},{"label":"Q","x":1.5,"y":1},{"label":"W","x":2.5,"y":1},{"label":"E","x":3.5,"y":1},{"label":"R","x":4.5,"y":1},{"label":"T","x":5.5,"y":1},{"label":"Y","x":6.5,"y":1},{"label":"U","x":7.5,"y":1},{"label":"I","x":8.5,"y":1},{"label":"O","x":9.5,"y":1},{"label":"P","x":10.5,"y":1},{"label":"{","x":11.5,"y":1},{"label":"}","x":12.5,"y":1},{"label":"|","x":13.5,"y":1,"w":1.5},{"label":"Caps Lock","x":0,"y":2,"w":1.75},{"label":"A","x":1.75,"y":2},{"label":"S","x":2.75,"y":2},{"label":"D","x":3.75,"y":2},{"label":"F","x":4.75,"y":2},{"label":"G","x":5.75,"y":2},{"label":"H","x":6.75,"y":2},{"label":"J","x":7.75,"y":2},{"label":"K","x":8.75,"y":2},{"label":"L","x":9.75,"y":2},{"label":":","x":10.75,"y":2},{"label":"\"","x":11.75,"y":2},{"label":"Enter","x":12.75,"y":2,"w":2.25},{"label":"Shift","x":0,"y":3,"w":2.25},{"label":"Z","x":2.25,"y":3},{"label":"X","x":3.25,"y":3},{"label":"C","x":4.25,"y":3},{"label":"V","x":5.25,"y":3},{"label":"B","x":6.25,"y":3},{"label":"N","x":7.25,"y":3},{"label":"M","x":8.25,"y":3},{"label":"<","x":9.25,"y":3},{"label":">","x":10.25,"y":3},{"label":"?","x":11.25,"y":3},{"label":"Shift","x":12.25,"y":3,"w":1.75},{"label":"HHKB Fn","x":14,"y":3},{"label":"Ctrl","x":0,"y":4,"w":1.5},{"label":"Win","x":1.5,"y":4},{"label":"Alt","x":2.5,"y":4,"w":1.5},{"label":"Space","x":4,"y":4,"w":6},{"label":"Alt","x":10,"y":4,"w":1.5},{"label":"Win","x":11.5,"y":4},{"label":"Menu","x":12.5,"y":4},{"label":"Ctrl","x":13.5,"y":4,"w":1.5}]
         },
 
         "LAYOUT_60_ansi_split_rshift": {
             "key_count": 62,
-            "layout": [
-                {"label":"~", "x":0, "y":0},
-                {"label":"!", "x":1, "y":0},
-                {"label":"@", "x":2, "y":0},
-                {"label":"#", "x":3, "y":0},
-                {"label":"$", "x":4, "y":0},
-                {"label":"%", "x":5, "y":0},
-                {"label":"^", "x":6, "y":0},
-                {"label":"&", "x":7, "y":0},
-                {"label":"*", "x":8, "y":0},
-                {"label":"(", "x":9, "y":0},
-                {"label":")", "x":10, "y":0},
-                {"label":"_", "x":11, "y":0},
-                {"label":"+", "x":12, "y":0},
-                {"label":"Backspace", "x":13, "y":0, "w":2},
-                {"label":"Tab", "x":0, "y":1, "w":1.5},
-                {"label":"Q", "x":1.5, "y":1},
-                {"label":"W", "x":2.5, "y":1},
-                {"label":"E", "x":3.5, "y":1},
-                {"label":"R", "x":4.5, "y":1},
-                {"label":"T", "x":5.5, "y":1},
-                {"label":"Y", "x":6.5, "y":1},
-                {"label":"U", "x":7.5, "y":1},
-                {"label":"I", "x":8.5, "y":1},
-                {"label":"O", "x":9.5, "y":1},
-                {"label":"P", "x":10.5, "y":1},
-                {"label":"{", "x":11.5, "y":1},
-                {"label":"}", "x":12.5, "y":1},
-                {"label":"|", "x":13.5, "y":1, "w":1.5},
-                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
-                {"label":"A", "x":1.75, "y":2},
-                {"label":"S", "x":2.75, "y":2},
-                {"label":"D", "x":3.75, "y":2},
-                {"label":"F", "x":4.75, "y":2},
-                {"label":"G", "x":5.75, "y":2},
-                {"label":"H", "x":6.75, "y":2},
-                {"label":"J", "x":7.75, "y":2},
-                {"label":"K", "x":8.75, "y":2},
-                {"label":"L", "x":9.75, "y":2},
-                {"label":":", "x":10.75, "y":2},
-                {"label":"\"", "x":11.75, "y":2},
-                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
-                {"label":"Shift", "x":0, "y":3, "w":2.25},
-                {"label":"Z", "x":2.25, "y":3},
-                {"label":"X", "x":3.25, "y":3},
-                {"label":"C", "x":4.25, "y":3},
-                {"label":"V", "x":5.25, "y":3},
-                {"label":"B", "x":6.25, "y":3},
-                {"label":"N", "x":7.25, "y":3},
-                {"label":"M", "x":8.25, "y":3},
-                {"label":"<", "x":9.25, "y":3},
-                {"label":">", "x":10.25, "y":3},
-                {"label":"?", "x":11.25, "y":3},
-                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
-                {"label":"HHKB Fn", "x":14, "y":3},
-                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
-                {"label":"Win", "x":1.25, "y":4, "w":1.25},
-                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
-                {"label":"Space", "x":3.75, "y":4, "w":6.25},
-                {"label":"Alt", "x":10, "y":4, "w":1.25},
-                {"label":"Win", "x":11.25, "y":4, "w":1.25},
-                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
-                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
-            ]
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"HHKB Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"Space", "x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_60_abnt2": {
+            "key_count": 63,
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"\u00a8", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"`", "x":11.5, "y":1}, {"label":"{", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":"\u00c7", "x":10.75, "y":2}, {"label":"^", "x":11.75, "y":2}, {"label":"}", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":":", "x":11.25, "y":3}, {"label":"?", "x":12.25, "y":3}, {"label":"Shift", "x":13.25, "y":3, "w":1.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
         }
     }
 }

keyboards/gh60/revc/keymaps/default_abnt2/keymap.c

@@ -0,0 +1,83 @@
+/* Copyright 2019 Luiz Correia
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include QMK_KEYBOARD_H
+#include "keymap_br_abnt2.h"
+
+enum layer_names {
+    _BL,
+    _FL,
+    _CL,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Layer 0 (BR ABNT2 Layout shown)
+   * ,-----------------------------------------------------------.
+   * |Esc|1 !|2 @|3 #|4 $|5 %|6 ¨|7 &|8 *|9 (|0 )|- _|= +| Bksp  |
+   * |-----------------------------------------------------------|
+   * | Tab | Q | W | E | R | T | Y | U | I | O | P |' `|{ [|Enter|
+   * |------------------------------------------------------.    |
+   * | Fn1  | A | S | D | F | G | H | J | K | L | Ç |^ ~|} ]|    |
+   * |-----------------------------------------------------------|
+   * |Sft |\ || Z | X | C | V | B | N | M |, <|. >|; :|/ ?|Shift |
+   * |-----------------------------------------------------------|
+   * |Ctrl |GUI|Alt  |         Space         |Alt  |GUI|Fn2|Ctrl |
+   * `-----------------------------------------------------------'
+   */
+  [_BL] = LAYOUT_60_abnt2(
+    KC_GESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    BR_ACUT, BR_LBRC,
+    KC_CAPS,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,  BR_CCDL,  BR_TILD, BR_RBRC, KC_ENT,
+    KC_LSFT, BR_BSLS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT, BR_SCLN, BR_SLSH, KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, MO(_FL),   KC_RCTL),
+
+
+  [_FL] = LAYOUT_60_abnt2(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+    XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_LCTL, KC_LGUI, KC_LGUI,                            XXXXXXX,                            KC_RALT, KC_RGUI, _______, KC_RCTL),
+
+  [_CL] = LAYOUT_60_abnt2(
+    KC_GRV,  KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DEL,
+    XXXXXXX, XXXXXXX, KC_UP,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    _______, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_LCTL, KC_LGUI, KC_LALT,                            XXXXXXX,                            XXXXXXX, XXXXXXX, _______, XXXXXXX),
+
+};
+
+void matrix_scan_user(void) {
+
+    if (layer_state_is(_FL)) {
+        gh60_wasd_leds_on();
+        gh60_fn_led_on();
+    } else {
+        gh60_wasd_leds_off();
+        gh60_fn_led_off();
+    }
+
+    if (layer_state_is(_CL)) {
+        gh60_poker_leds_on();
+        gh60_esc_led_on();
+    } else {
+        gh60_poker_leds_off();
+        gh60_esc_led_off();
+    }
+
+};

keyboards/gh60/revc/keymaps/default_abnt2/readme.md

@@ -0,0 +1,15 @@
+# BR ABNT2 layout
+
+This is a Brazilian ABNT2 keymap for the GH60 in a standard layout.
+
+The top-left sends Escape normally, but becomes a quote key when
+tapped whilst either Fn or GUI are held down.
+
+## Layout Image
+
+![Layout Image](http://s2.glbimg.com/hlQMZ_E87B3DB_96rVuO_pY2Yy8=/695x0/s.glbimg.com/po/tt2/f/original/2016/06/21/900px-kb_portuguese_brazilsvg_.png)
+
+----
+### References
+
+1. [Grave Escape - QMK Firmware Documentation](https://docs.qmk.fm/#/feature_grave_esc)

keyboards/gh60/revc/revc.h

@@ -115,3 +115,30 @@ inline void gh60_wasd_leds_off(void)    { setPinInput(F7); writePinLow(F7); }
     { K30, KC_NO, K32, K33,   K34,   K35, K36,   K37,   K38,   K39,   K3A, K3B, K3C,   K3D }, \
     { K40, K41,   K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C,   K4D }  \
 }
+
+/* LAYOUT_60_abnt2
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d     │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │10   │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d  │
+ * │20    │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┤
+ * │30  │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │  3d  │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬──┴─┬────┤
+ * │40  │41  │42  │45                      │4a  │4b  │4c  │4d  │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+*/
+#define LAYOUT_60_abnt2( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,            K45,                K4A, K4B,K4C, K4D       \
+) { \
+    { K00, K01, K02, K03,   K04,   K05, K06,   K07,   K08,   K09,   K0A, K0B, K0C,   K0D   }, \
+    { K10, K11, K12, K13,   K14,   K15, K16,   K17,   K18,   K19,   K1A, K1B, K1C,   KC_NO }, \
+    { K20, K21, K22, K23,   K24,   K25, K26,   K27,   K28,   K29,   K2A, K2B, K2C,   K2D   }, \
+    { K30, K31, K32, K33,   K34,   K35, K36,   K37,   K38,   K39,   K3A, K3B, K3C,   K3D   }, \
+    { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C,   K4D   }  \
+}

keyboards/hadron/rules.mk

@@ -1,2 +1 @@
-
 DEFAULT_FOLDER = hadron/ver2

keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.c

@@ -1,126 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
-};
-#endif
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
- */
-void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-}

keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

keyboards/hadron/ver3/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800

keyboards/hadron/ver3/rules.mk

@@ -1,6 +1,4 @@
-# projecct specific files
-
-# Cortex version
+# MCU name
 MCU = STM32F303
 
 # Build Options

keyboards/handwired/co60/rev6/rules.mk

@@ -1,40 +1,5 @@
-# project specific files
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -v 0483 -p df11
+# MCU name
+MCU = STM32F303
 
 # Code for backlight breathing:
 SRC += led.c

keyboards/handwired/co60/rev7/rules.mk

@@ -1,40 +1,5 @@
-# project specific files
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -v 0483 -p df11
+# MCU name
+MCU = STM32F303
 
 # Code for backlight breathing:
 SRC += led.c

keyboards/handwired/steamvan/rev1/rules.mk

@@ -1,40 +1,5 @@
-# project specific files
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -v 0483 -p df11
+# MCU name
+MCU = STM32F303
 
 # Code for backlight breathing:
 SRC += led.c

keyboards/handwired/wulkan/rules.mk

@@ -1,3 +1,4 @@
+# MCU name
 MCU = STM32F303
 
 # Build Options

keyboards/hs60/v2/boards/GENERIC_STM32_F303XC/board.c

@@ -1,126 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
-};
-#endif
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
- */
-void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-}

keyboards/hs60/v2/boards/GENERIC_STM32_F303XC/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

keyboards/hs60/v2/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800

keyboards/hs60/v2/rules.mk

@@ -1,52 +1,11 @@
-# project specific files
-SRC =	keyboards/wilba_tech/wt_main.c \
-		keyboards/wilba_tech/wt_rgb_backlight.c \
-		drivers/issi/is31fl3733.c \
-		quantum/color.c \
-		drivers/arm/i2c_master.c
-
-## chip/board settings
-#   the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-#   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
+# MCU name
+MCU = STM32F303
 
 # Do not put the microcontroller into power saving mode
 # when we get USB suspend event. We want it to keep updating
 # backlight effects.
 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
 
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
-
 # Build Options
 #   comment out to disable the options.
 #
@@ -67,3 +26,10 @@ DYNAMIC_KEYMAP_ENABLE = no
 CIE1931_CURVE = yes
 
 LAYOUTS = 60_ansi 60_iso
+
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
+		drivers/issi/is31fl3733.c \
+		quantum/color.c \
+		drivers/arm/i2c_master.c

keyboards/kbdfans/kbd19x/rules.mk

@@ -22,7 +22,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)

keyboards/kbdfans/kbd4x/rules.mk

@@ -22,7 +22,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)

keyboards/kbdfans/kbd66/rules.mk

@@ -22,7 +22,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode

keyboards/kbdfans/kbd67/hotswap/rules.mk

@@ -22,7 +22,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)

keyboards/kbdfans/kbd67/mkiirgb/rules.mk

@@ -1,6 +1,6 @@
-MCU  = STM32F303
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
+# MCU name
+MCU = STM32F303
+
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys
@@ -11,4 +11,4 @@ NKRO_ENABLE = yes                 # USB Nkey Rollover
 AUDIO_ENABLE = no
 RGB_MATRIX_ENABLE = yes     # Use RGB matrix
 
-LAYOUTS = 65_ansi_blocker
+LAYOUTS = 65_ansi_blocker

keyboards/kbdfans/kbd67/rev1/rules.mk

@@ -22,7 +22,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)

keyboards/kbdfans/kbd67/rev2/rules.mk

@@ -22,7 +22,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)

keyboards/kbdfans/kbd6x/rules.mk

@@ -22,7 +22,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode

keyboards/kbdfans/kbd8x/rules.mk

@@ -22,7 +22,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes      # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)

keyboards/leeku/finger65/config.h

@@ -0,0 +1,45 @@
+/*
+Copyright 2018 Rasmus Schults <rasmusx@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6050
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    LeeKu
+#define PRODUCT         L3
+#define DESCRIPTION     QMK keyboard firmware for L3
+
+#define RGBLED_NUM 12
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B3, B4, B5, B6, B7 }
+#define MATRIX_ROW_PINS { C3, C4, C5, C6, C7 }
+#define UNUSED_PINS
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 1
+

keyboards/leeku/finger65/finger65.h

@@ -0,0 +1,61 @@
+/* Copyright 2018 Rasmus Schults <rasmusx@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, \
+    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N,      K3P, \
+    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N,      K2P, \
+    K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M,      K1O, K1P, \
+    K0A, K0B, K0C,           K0D, K0G, K0I,           K0J, K0M,      K0N, K0O, K0P  \
+) { \
+    { K4A, K4B, K4C, K4D, K4E,   K4F,   K4G, K4H,   K4I, K4J, K4K,   K4L,   K4M, K4N,   K4O,   K4P }, \
+    { K3A, K3B, K3C, K3D, K3E,   K3F,   K3G, K3H,   K3I, K3J, K3K,   K3L,   K3M, K3N,   KC_NO, K3P }, \
+    { K2A, K2B, K2C, K2D, K2E,   K2F,   K2G, K2H,   K2I, K2J, K2K,   K2L,   K2M, K2N,   KC_NO, K2P }, \
+    { K1A, K1B, K1C, K1D, K1E,   K1F,   K1G, K1H,   K1I, K1J, K1K,   K1L,   K1M, KC_NO, K1O,   K1P }, \
+    { K0A, K0B, K0C, K0D, KC_NO, KC_NO, K0G, KC_NO, K0I, K0J, KC_NO, KC_NO, K0M, K0N,   K0O,   K0P }  \
+}
+
+#define LAYOUT_65_ansi( \
+    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M,      K4O, K4P, \
+    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N,      K3P, \
+    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L,      K2N,      K2P, \
+    K1A,      K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M,      K1O, K1P, \
+    K0A, K0B, K0C,                K0G,                K0J, K0M,      K0N, K0O, K0P  \
+) { \
+    { K4A, K4B,   K4C, K4D,   K4E,   K4F,   K4G, K4H,   K4I,   K4J, K4K,   K4L,   K4M,   KC_NO, K4O,   K4P }, \
+    { K3A, K3B,   K3C, K3D,   K3E,   K3F,   K3G, K3H,   K3I,   K3J, K3K,   K3L,   K3M,   K3N,   KC_NO, K3P }, \
+    { K2A, K2B,   K2C, K2D,   K2E,   K2F,   K2G, K2H,   K2I,   K2J, K2K,   K2L,   KC_NO, K2N,   KC_NO, K2P }, \
+    { K1A, KC_NO, K1C, K1D,   K1E,   K1F,   K1G, K1H,   K1I,   K1J, K1K,   K1L,   K1M,   KC_NO, K1O,   K1P }, \
+    { K0A, K0B,   K0C, KC_NO, KC_NO, KC_NO, K0G, KC_NO, KC_NO, K0J, KC_NO, KC_NO, K0M,   K0N,   K0O,   K0P }  \
+}
+
+#define LAYOUT_65_ansi_split_bs( \
+    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, \
+    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N,      K3P, \
+    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L,      K2N,      K2P, \
+    K1A,      K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M,      K1O, K1P, \
+    K0A, K0B, K0C,                K0G,                K0J, K0M,      K0N, K0O, K0P  \
+) { \
+    { K4A, K4B,   K4C, K4D,   K4E,   K4F,   K4G, K4H,   K4I,   K4J, K4K,   K4L,   K4M,   K4N,   K4O,   K4P }, \
+    { K3A, K3B,   K3C, K3D,   K3E,   K3F,   K3G, K3H,   K3I,   K3J, K3K,   K3L,   K3M,   K3N,   KC_NO, K3P }, \
+    { K2A, K2B,   K2C, K2D,   K2E,   K2F,   K2G, K2H,   K2I,   K2J, K2K,   K2L,   KC_NO, K2N,   KC_NO, K2P }, \
+    { K1A, KC_NO, K1C, K1D,   K1E,   K1F,   K1G, K1H,   K1I,   K1J, K1K,   K1L,   K1M,   KC_NO, K1O,   K1P }, \
+    { K0A, K0B,   K0C, KC_NO, KC_NO, KC_NO, K0G, KC_NO, KC_NO, K0J, KC_NO, KC_NO, K0M,   K0N,   K0O,   K0P }  \
+}

keyboards/leeku/finger65/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+#include QMK_KEYBOARD_H
+
+enum layers {
+  _BASE,
+  _FN,
+};
+
+/*
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │ESC│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ ( │ ) │ ` │BS │HOM│
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
+ * │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │PGU│
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┼───┤
+ * │ FUNC │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │ENT │PGD│
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤
+ * │ SHIFT  │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │SHIFT │UP │END│
+ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴──┬───┼───┼───┤
+ * │CTRL│GUI │ALT │     SPACE (6.25u)      │ ALT │CTRL │LFT│DWN│RGT│
+ * └────┴────┴────┴────────────────────────┴─────┴─────┴───┴───┴───┘
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_all(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSPC, KC_HOME,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+    TG(_FN), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,  KC_PGDN,
+    KC_LSFT, XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
+    KC_LCTL, KC_LGUI, KC_LALT,                   _______, KC_SPC,  _______,          KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT),
+
+  [_FN] = LAYOUT_all(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, KC_DEL,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   KC_INS,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_PAUS,
+    _______, _______, _______,                   _______, _______, _______,          _______, _______,          KC_HOME, KC_PGDN, KC_END),
+};

keyboards/leeku/finger65/keymaps/madhatter/keymap.c

@@ -0,0 +1,54 @@
+#include QMK_KEYBOARD_H
+
+enum layers {
+  _QWERTY,
+  _FNMS,
+};
+
+#define FNMS MO(_FNMS)
+
+/*
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │ESC│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ ( │ ) │ \ │ \ │HOM│
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┼───┼───┤
+ * │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │BKSPC│PGU│
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+ * │   `  │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ ENTER  │PGD│
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+ * │ SHIFT  │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │SHIFT │UP │END│
+ * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴──┬───┼───┼───┤
+ * │CTRL │GUI│ ALT │      SPACE (6.25u)    │ ALT │CTRL │LFT│DWN│RGT│
+ * └─────┴───┴─────┴───────────────────────┴─────┴─────┴───┴───┴───┘
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_65_ansi_split_bs(
+    KC_GESC, KC_1,   KC_2,   KC_3,  KC_4, KC_5,  KC_6,  KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_BSLS, KC_HOME,
+    KC_TAB,  KC_Q,   KC_W,   KC_E,  KC_R, KC_T,  KC_Y,  KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC,          KC_BSPC, KC_PGUP,
+    KC_GRV,  KC_A,   KC_S,   KC_D,  KC_F, KC_G,  KC_H,  KC_J, KC_K,    KC_L,   KC_SCLN, KC_QUOT,          KC_ENT,           KC_PGDN,
+    KC_LSFT, KC_Z,   KC_X,   KC_C,  KC_V, KC_B,  KC_N,  KC_M, KC_COMM, KC_DOT, KC_SLSH,          KC_RSFT, KC_UP,   KC_END,
+    KC_LCTL, KC_LGUI,KC_LALT,                    KC_SPC,                       FNMS,             KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+
+  [_FNMS] = LAYOUT_65_ansi_split_bs(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, _______, KC_DEL,  KC_MPLY,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,         RESET,   KC_VOLU,
+    AG_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          EEP_RST,         KC_VOLD,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   KC_BTN1, KC_MS_U,KC_MNXT,
+    _______, _______, _______,                            _______,                   _______,          _______,          KC_MS_L,KC_MS_D, KC_MS_R
+  ),
+};
+
+// uint32_t layer_state_set_user(uint32_t state) {
+//   switch(biton32(state)) {
+//   case _FNMS:
+//     led_off();
+//     rgb_on();
+//     break;
+//   default:
+//     led_off();
+//     rgb_off();
+//     break;
+//   }
+//   return state;
+// }

keyboards/leeku/finger65/keymaps/madhatter/rules.mk

@@ -0,0 +1 @@
+MOUSEKEY_ENABLE = yes

keyboards/leeku/finger65/readme.md

@@ -0,0 +1,16 @@
+# Leeku Finger65 PCB
+
+* Keyboard Maintainer: [sidcarter](https://github.com/sidcarter)
+* Hardware Supported: LeeKu Finger65 PCB, atmega32a
+
+* Make example for this keyboard (after setting up your build environment):
+
+    make leeku/finger65:default
+
+* This PCB is not QMK ready by default. If you want to use your Leeku Finger65 PCB with QMK, you must:
+
+    * ISP Flash the Leeku PCB using the bootloader for the atmega32a that resides in the `util/` folder
+    * Build and install [bootloadHID](https://www.obdev.at/products/vusb/bootloadhid.html) on your system
+    * You can then do a `make leeku/finger65:default:flash` to flash your PCB with QMK
+
+* See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/leeku/finger65/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = atmega32a
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = bootloadHID
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = no        # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no            # USB Nkey Rollover
+MIDI_ENABLE = no            # MIDI support

keyboards/leeku/finger65/usbconfig.h

@@ -0,0 +1,364 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   0
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'L', 'e', 'e', 'k', 'u'
+#define USB_CFG_VENDOR_NAME_LEN 5
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'F', 'i', 'n', 'g', 'e', 'r', '6', '5'
+#define USB_CFG_DEVICE_NAME_LEN 8
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+#endif /* __usbconfig_h_included__ */

keyboards/nafuda/config.h

@@ -0,0 +1,69 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3060
+#define DEVICE_VER      0x0012
+#define MANUFACTURER    Salicylic_Acid
+#define PRODUCT         nafuda
+#define DESCRIPTION     A custom cursorpad
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D1, D0, D4 }
+#define MATRIX_COL_PINS { F4, F5, F6 }
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+
+#define RGBLED_NUM 7    // Number of LEDs
+#define RGBLIGHT_ANIMATIONS
+
+#ifndef IOS_DEVICE_ENABLE
+  #define RGBLIGHT_LIMIT_VAL 180
+  #define RGBLIGHT_VAL_STEP 17
+#else
+  #define RGBLIGHT_LIMIT_VAL 50
+  #define RGBLIGHT_VAL_STEP 4
+#endif
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+
+#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
+  #define USB_MAX_POWER_CONSUMPTION 400
+#else
+  // fix iPhone and iPad power adapter issue
+  // iOS device need lessthan 100
+  #define USB_MAX_POWER_CONSUMPTION 100
+#endif

keyboards/nafuda/info.json

@@ -0,0 +1,20 @@
+{
+    "keyboard_name": "nafuda", 
+    "url": "https://salicylic-acid3.hatenablog.com/", 
+    "maintainer": "Salicylic_acid3", 
+    "width": 3, 
+    "height": 3, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Mouse", "x":1, "y":0},
+                {"label":"Backspace", "x":0, "y":0.5},
+                {"label":"\u2191", "x":1, "y":1},
+                {"label":"Browser", "x":2, "y":0.5},
+                {"label":"\u2190", "x":0, "y":1.5},
+                {"label":"\u2193", "x":1, "y":2},
+                {"label":"\u2192", "x":2, "y":1.5}
+            ]
+        }
+    }
+}

keyboards/nafuda/keymaps/default/config.h

@@ -0,0 +1,23 @@
+/* Copyright 2018 Salicylic_acid3
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Select hand configuration */
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 180
+

keyboards/nafuda/keymaps/default/keymap.c

@@ -0,0 +1,61 @@
+#include QMK_KEYBOARD_H
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_number {
+  _BASE,
+  _MOUSE,
+  _BROWSER,
+  _ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT(
+  //|-------------------------------------------|
+                          TG(_MOUSE),
+  //|---------------+---------------+-----------|
+LT(_ADJUST, KC_BSPC),          KC_UP,TG(_BROWSER),
+  //|---------------+---------------+-----------|
+             KC_LEFT,        KC_DOWN,    KC_RIGHT
+  //|-------------------------------------------|
+  ),
+
+  [_MOUSE] = LAYOUT(
+  //|-------------------------------------------|
+                          TG(_MOUSE),
+  //|---------------+---------------+-----------|
+             KC_BTN1,        KC_MS_U,    KC_BTN2,
+  //|---------------+---------------+-----------|
+             KC_MS_L,        KC_MS_D,    KC_MS_R
+  //|-------------------------------------------|
+  ),
+
+  [_BROWSER] = LAYOUT(
+  //|-------------------------------------------|
+                          LCTL(KC_W),
+  //|---------------+---------------+-----------|
+    LCTL(LSFT(KC_T)),        KC_WH_U,TG(_BROWSER),
+  //|---------------+---------------+-----------|
+  LCTL(LSFT(KC_TAB)),        KC_WH_D,LCTL(KC_TAB)
+  //|-------------------------------------------|
+  ),
+
+  [_ADJUST] = LAYOUT( /* Base */
+  //|-------------------------------------------|
+                             RGB_VAD,
+  //|---------------+---------------+-----------|
+         MO(_ADJUST),        RGB_SAD,    RGB_VAI,
+  //|---------------+---------------+-----------|
+             RGB_MOD,        RGB_TOG,    RGB_SAI
+  //|-------------------------------------------|
+  )
+};

keyboards/nafuda/keymaps/default/readme.md

@@ -0,0 +1,34 @@
+# The default keymap for nafuda
+
+## Base
+|        1       |     2    |  3    |
+|:--------------:|:--------:|:-----:|
+|                |   MOUSE  |       |
+| ADJUST or BSPC |     UP   |BROWSER|
+|    LEFT        |    DOWN  |  RIGHT|
+
+
+## MOUSE
+|  1       |     2    |     3     |
+|:--------:|:--------:|:---------:|
+|          |    BASE  |           |
+|    Btn 1 | MOUSE_UP |    Btn2   |
+|MOUSE_LEFT|MOUSE_DOWN|MOUSE_RIGHT|
+
+
+## BROWSER
+|       1     |     2    |    3    |
+|:-----------:|:--------:|:-------:|
+|             |  LCTL(W) |         |
+| LCTL+LSFT(T)| WHEEL_UP | BROWSER |
+|LCTL+SFT(TAB)|WHEEL_DOWN|LCTL(TAB)|
+
+
+## Adjust
+|    1    |     2   |    3   |
+|:-------:|:-------:|:------:|
+|         | RGB_VAD |        |
+| Adjust  | RGB_SAD | RGB_VAI|
+| RGB_MOD | RGB_TOG | RGB_SAI|
+
+

keyboards/nafuda/nafuda.c

@@ -0,0 +1,5 @@
+#include "nafuda.h"
+
+void matrix_init_kb(void) {
+	matrix_init_user();
+};

keyboards/nafuda/nafuda.h

@@ -0,0 +1,24 @@
+#pragma once
+
+#include "quantum.h"
+
+/*
+ * ,-----------------.
+ * |     | L01 |     |
+ * |-----------------+
+ * | L10 | L11 | L12 |
+ * |-----------------+
+ * | L20 | L21 | L22 |
+ * |-----------------'
+ */
+
+#define LAYOUT( \
+         L01,      \
+    L10, L11, L12, \
+    L20, L21, L22  \
+  ) \
+  { \
+    {KC_NO,  L01,KC_NO  },  \
+    {  L10,  L11,  L12  },  \
+    {  L20,  L21,  L22  }   \
+  }

keyboards/nafuda/readme.md

@@ -0,0 +1,17 @@
+# nafuda
+
+![nafuda](https://cdn-ak.f.st-hatena.com/images/fotolife/S/Salicylic_acid3/20190608/20190608024901.jpg)
+
+This is 7 keys cursor macropad. 
+
+* Keyboard Maintainer: [Salicylic_acid3](https://github.com/Salicylic-acid3)
+* Hardware Supported: Nafuda PCB, Pro Micro
+* Hardware Availability: [PCB & Case Data](https://github.com/Salicylic-acid3/PCB_Data), [Booth Shop](https://salicylic-acid3.booth.pm/items/1271706)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make nafuda:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+[Build guide](https://salicylic-acid3.hatenablog.com/entry/nafuda-build-guide) 

keyboards/nafuda/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
+TAP_DANCE_ENABLE = no
+OLED_DRIVER_ENABLE = no
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+

keyboards/nk65/boards/GENERIC_STM32_F303XC/board.c

@@ -1,126 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
-};
-#endif
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
- */
-void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-}

keyboards/nk65/boards/GENERIC_STM32_F303XC/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

keyboards/nk65/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800

keyboards/nk65/rules.mk

@@ -1,52 +1,11 @@
-# project specific files
-SRC =	keyboards/wilba_tech/wt_main.c \
-		keyboards/wilba_tech/wt_rgb_backlight.c \
-		drivers/issi/is31fl3733.c \
-		quantum/color.c \
-		drivers/arm/i2c_master.c
-
-## chip/board settings
-#   the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-#   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
+# MCU name
+MCU = STM32F303
 
 # Do not put the microcontroller into power saving mode
 # when we get USB suspend event. We want it to keep updating
 # backlight effects.
 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
 
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
-
 # Build Options
 #   comment out to disable the options.
 #
@@ -67,3 +26,10 @@ DYNAMIC_KEYMAP_ENABLE = no
 CIE1931_CURVE = yes
 
 LAYOUTS = 65_ansi
+
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
+		drivers/issi/is31fl3733.c \
+		quantum/color.c \
+		drivers/arm/i2c_master.c

keyboards/planck/ez/rules.mk

@@ -1,5 +1,5 @@
-# Cortex version
-MCU  = STM32F303
+# MCU name
+MCU = STM32F303
 
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in

keyboards/planck/rev6/rules.mk

@@ -1,8 +1,5 @@
-# project specific files
-LAYOUTS += ortho_4x12
-
-# Cortex version
-MCU  = STM32F303
+# MCU name
+MCU = STM32F303
 
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in

keyboards/preonic/rev3/rules.mk

@@ -1,5 +1,5 @@
-# Cortex version
-MCU  = STM32F303
+# MCU name
+MCU = STM32F303
 
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in

keyboards/xbows/knight/keymaps/default/keymap.c

@@ -2,14 +2,14 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT(
-		KC_ESC,  KC_F1,   KC_F2, KC_F3,  KC_F4,  KC_F5,   KC_F6,  KC_F7, KC_F8,  KC_F9,   KC_F10, KC_F11,  KC_F12,  KC_DEL,  KC_PSCR, KC_ESC,  KC_TAB,  KC_BSPC, MO(1),
+		KC_ESC,  KC_F1,   KC_F2, KC_F3,  KC_F4,  KC_F5,   KC_F6,  KC_F7, KC_F8,  KC_F9,   KC_F10, KC_F11,  KC_F12,  KC_DEL,  KC_PSCR, KC_ESC ,  KC_TAB,  KC_BSPC, MO(1),
 		KC_GRV,  KC_1,    KC_2,  KC_3,   KC_4,   KC_5,    KC_6,   KC_7,  KC_8,   KC_9,            KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_EQL,  
 		KC_TAB,  KC_Q,    KC_W,  KC_E,   KC_R,   KC_T,    KC_Y,   KC_U,  KC_I,   KC_O,    KC_P,   KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, KC_P7,   KC_P8,   KC_P9,   KC_PMNS,      
 		KC_CAPS, KC_A,    KC_S,  KC_D,   KC_F,   KC_G,    KC_BSPC,KC_H,  KC_J,   KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,  KC_PGDN, KC_P4,   KC_P5,   KC_P6,   KC_PPLS,   
 		KC_LSFT, KC_Z,    KC_X,  KC_C,   KC_V,   KC_B,    KC_ENT, KC_N,  KC_M,   KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,            KC_P1,   KC_P2,   KC_P3,       
 		KC_LCTL, KC_LGUI, KC_LALT,KC_SPC,        KC_LCTL, KC_LSFT,KC_SPC,        KC_RALT, MO(1),  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT,          KC_P0,   KC_PDOT, KC_ENT),
   [1] = LAYOUT(
-		KC_ESC,  KC_F1,   KC_F2, KC_F3,  KC_F4,  KC_F5,   KC_F6,  KC_F7, KC_F8,  KC_F9,   KC_F10, KC_F11,  KC_F12,  KC_DEL,  KC_PSCR,  KC_ESC, KC_TAB, KC_BSPC,KC_TRNS,   
+		KC_ESC,  KC_F1,   KC_F2, KC_F3,  KC_F4,  KC_F5,   KC_F6,  KC_F7, KC_F8,  KC_F9,   KC_F10, KC_F11,  KC_F12,  KC_DEL,  KC_PSCR,  RESET,  KC_TAB, KC_BSPC,KC_TRNS,   
 		KC_GRV,  KC_1,    KC_2,  KC_3,   KC_4,   KC_5,    KC_6,   KC_7,  KC_8,   KC_9,            KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  KC_NLCK,KC_PSLS,KC_PAST,KC_EQL,
 		KC_TAB,  KC_Q,    KC_W,  KC_E,   KC_R,   KC_T,    KC_Y,   KC_U,  KC_I,   KC_O,    KC_P,   KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,  KC_P7,  KC_P8,  KC_P9,  KC_PMNS, 
 		KC_CAPS, KC_A,    KC_S,  KC_D,   KC_F,   KC_G,    BL_STEP,KC_H,  KC_J,   KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,  KC_PGDN,  KC_P4,  KC_P5,  KC_P6,  KC_PPLS, 

keyboards/xbows/knight/knight.c

@@ -1,19 +1,23 @@
 #include "knight.h"
+
 void matrix_init_kb(void) {
-    setPinOutput(D1);
-    setPinOutput(E2);
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+
     matrix_init_user();
-};
-void led_set_kb(uint8_t usb_led) {
-    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        writePinHigh(D1);
-    } else {
-        writePinLow(D1);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinHigh(E2);
-    } else {
-        writePinLow(E2);
-    }
-    led_set_user(usb_led);
+    led_init_ports();
+}
+
+void led_init_ports(void) {
+    setPinOutput(D1);
+    writePinHigh(D1);
+    setPinOutput(E2);
+    writePinHigh(E2);
+}
+bool led_update_kb(led_t led_state) {
+    if(led_update_user(led_state)) {
+        writePin(E2, !led_state.caps_lock);
+        writePin(D1, !led_state.num_lock);
+    }
+    return true;
 }

layouts/community/ortho_4x12/jotix/keymap.c

@@ -32,9 +32,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 // ┌───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┐
     KC_GRV, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   _______,
 // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤
-    _______,KC_VOLD,KC_MUTE,KC_VOLU,KC_MINS, KC_EQL,KC_LBRC,KC_RBRC,_______,_______,_______,_______,
+    _______,KC_VOLD,KC_MUTE,KC_VOLU,KC_MINS, KC_EQL,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,_______,_______,
 // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤
-    _______,KC_MPRV,KC_MPLY,KC_MNXT,KC_UNDS,KC_PLUS,KC_LCBR,KC_RCBR,_______,_______,_______,_______,
+    _______,KC_MPRV,KC_MPLY,KC_MNXT,KC_UNDS,KC_PLUS,KC_BTN1,KC_BTN2,_______,_______,_______,_______,
 // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤
     _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______
 // └───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┘

layouts/default/60_abnt2/default_60_abnt2/keymap.c

@@ -0,0 +1,22 @@
+#include QMK_KEYBOARD_H
+#include "keymap_br_abnt2.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_60_abnt2(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    BR_ACUT, BR_LBRC,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    BR_CCDL, BR_TILD, BR_RBRC, KC_ENT,
+        KC_LSFT, BR_BSLS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  BR_SCLN, BR_SLSH, KC_RSFT,
+        KC_LCTL, KC_LALT, KC_LGUI,                            KC_SPC,                             KC_RGUI, KC_RALT, MO(1),   KC_RCTL
+    ),
+
+    [1] = LAYOUT_60_abnt2(
+        BR_QUOT, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, _______, _______, _______, RESET,   _______, KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    )
+
+};

layouts/default/60_abnt2/info.json

@@ -0,0 +1,76 @@
+{
+    "keyboard_name": "",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_60_abnt2": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"1", "x":1, "y":0},
+                {"label":"2", "x":2, "y":0},
+                {"label":"3", "x":3, "y":0},
+                {"label":"4", "x":4, "y":0},
+                {"label":"5", "x":5, "y":0},
+                {"label":"6", "x":6, "y":0},
+                {"label":"7", "x":7, "y":0},
+                {"label":"8", "x":8, "y":0},
+                {"label":"9", "x":9, "y":0},
+                {"label":"0", "x":10, "y":0},
+                {"label":"-", "x":11, "y":0},
+                {"label":"=", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0, "w":2},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"´", "x":11.5, "y":1},
+                {"label":"[", "x":12.5, "y":1},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":"Ç", "x":10.75, "y":2},
+                {"label":"˜", "x":11.75, "y":2},
+                {"label":"]", "x":12.75, "y":2},
+                {"label":"Enter", "x":13.5, "y":1, "w":1.5},
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"\\", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":",", "x":9.25, "y":3},
+                {"label":".", "x":10.25, "y":3},
+                {"label":";", "x":11.25, "y":3},
+                {"label":"/", "x":12.25, "y":3},
+                {"label":"Shift", "x":13.25, "y":3, "w":1.75},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"GUI", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"AltGr", "x":10, "y":4, "w":1.25},
+                {"label":"GUI", "x":11.25, "y":4, "w":1.25},
+                {"label":"MO(1)", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
+        }
+    }
+}

layouts/default/60_abnt2/layout.json

@@ -0,0 +1,5 @@
+[{a:7,f:5},"","","","","","","","","","","","","",{w:2},""],
+[{w:1.5},"","","","","","","","","","","","","",{w:1.5,w2:1.25,h2:2,x2:0.25},""],
+[{w:1.75},"","","","","","","","","","","","",""],
+[{w:1.25},"","","","","","","","","","","","","",{w:1.75},""],
+[{w:1.25},"",{w:1.25},"",{w:1.25},"",{w:6.25},"",{w:1.25},"",{w:1.25},"",{w:1.25},"",{w:1.25},""]

layouts/default/60_abnt2/readme.md

@@ -0,0 +1,3 @@
+# 60_abnt2
+
+![60% ABNT2 layout](https://raw.githubusercontent.com/noroadsleft/qmk_images/master/layouts/default/60_abnt2/keyboard-layout.png)

lib/python/milc.py

@@ -20,6 +20,7 @@ import re
 import shlex
 import sys
 from decimal import Decimal
+from pathlib import Path
 from tempfile import NamedTemporaryFile
 from time import sleep
 
@@ -39,7 +40,7 @@ import colorama
 from appdirs import user_config_dir
 
 # Disable logging until we can configure it how the user wants
-logging.basicConfig(filename='/dev/null')
+logging.basicConfig(stream=os.devnull)
 
 # Log Level Representations
 EMOJI_LOGLEVELS = {
@@ -96,7 +97,6 @@ def format_ansi(text):
 class ANSIFormatter(logging.Formatter):
     """A log formatter that inserts ANSI color.
     """
-
     def format(self, record):
         msg = super(ANSIFormatter, self).format(record)
         return format_ansi(msg)
@@ -105,7 +105,6 @@ class ANSIFormatter(logging.Formatter):
 class ANSIEmojiLoglevelFormatter(ANSIFormatter):
     """A log formatter that makes the loglevel an emoji on UTF capable terminals.
     """
-
     def format(self, record):
         if UNICODE_SUPPORT:
             record.levelname = EMOJI_LOGLEVELS[record.levelname].format(**ansi_colors)
@@ -115,7 +114,6 @@ class ANSIEmojiLoglevelFormatter(ANSIFormatter):
 class ANSIStrippingFormatter(ANSIFormatter):
     """A log formatter that strips ANSI.
     """
-
     def format(self, record):
         msg = super(ANSIStrippingFormatter, self).format(record)
         return ansi_escape.sub('', msg)
@@ -127,7 +125,6 @@ class Configuration(object):
     This class never raises IndexError, instead it will return None if a
     section or option does not yet exist.
     """
-
     def __contains__(self, key):
         return self._config.__contains__(key)
 
@@ -214,9 +211,8 @@ def handle_store_boolean(self, *args, **kwargs):
 
 
 class SubparserWrapper(object):
-    """Wrap subparsers so we can populate the normal and the shadow parser.
+    """Wrap subparsers so we can track what options the user passed.
     """
-
     def __init__(self, cli, submodule, subparser):
         self.cli = cli
         self.submodule = submodule
@@ -232,26 +228,30 @@ class SubparserWrapper(object):
         self.subparser.completer = completer
 
     def add_argument(self, *args, **kwargs):
+        """Add an argument for this subcommand.
+
+        This also stores the default for the argument in `self.cli.default_arguments`.
+        """
         if 'action' in kwargs and kwargs['action'] == 'store_boolean':
+            # Store boolean will call us again with the enable/disable flag arguments
             return handle_store_boolean(self, *args, **kwargs)
 
         self.cli.acquire_lock()
         self.subparser.add_argument(*args, **kwargs)
-
-        if 'default' in kwargs:
-            del kwargs['default']
-        if 'action' in kwargs and kwargs['action'] == 'store_false':
-            kwargs['action'] == 'store_true'
-        self.cli.subcommands_default[self.submodule].add_argument(*args, **kwargs)
+        if self.submodule not in self.cli.default_arguments:
+            self.cli.default_arguments[self.submodule] = {}
+        self.cli.default_arguments[self.submodule][self.cli.get_argument_name(*args, **kwargs)] = kwargs.get('default')
         self.cli.release_lock()
 
 
 class MILC(object):
     """MILC - An Opinionated Batteries Included Framework
     """
-
     def __init__(self):
         """Initialize the MILC object.
+
+            version
+                The version string to associate with your CLI program
         """
         # Setup a lock for thread safety
         self._lock = threading.RLock() if thread else None
@@ -263,9 +263,10 @@ class MILC(object):
         self._inside_context_manager = False
         self.ansi = ansi_colors
         self.arg_only = []
-        self.config = Configuration()
+        self.config = None
         self.config_file = None
-        self.version = os.environ.get('QMK_VERSION', 'unknown')
+        self.default_arguments = {}
+        self.version = 'unknown'
         self.release_lock()
 
         # Figure out our program name
@@ -273,6 +274,7 @@ class MILC(object):
         self.prog_name = self.prog_name.split('/')[-1]
 
         # Initialize all the things
+        self.read_config_file()
         self.initialize_argparse()
         self.initialize_logging()
 
@@ -282,7 +284,7 @@ class MILC(object):
 
     @description.setter
     def description(self, value):
-        self._description = self._arg_parser.description = self._arg_defaults.description = value
+        self._description = self._arg_parser.description = value
 
     def echo(self, text, *args, **kwargs):
         """Print colorized text to stdout.
@@ -311,12 +313,9 @@ class MILC(object):
 
         self.acquire_lock()
         self.subcommands = {}
-        self.subcommands_default = {}
         self._subparsers = None
-        self._subparsers_default = None
         self.argwarn = argcomplete.warn
         self.args = None
-        self._arg_defaults = argparse.ArgumentParser(**kwargs)
         self._arg_parser = argparse.ArgumentParser(**kwargs)
         self.set_defaults = self._arg_parser.set_defaults
         self.print_usage = self._arg_parser.print_usage
@@ -329,25 +328,18 @@ class MILC(object):
         self._arg_parser.completer = completer
 
     def add_argument(self, *args, **kwargs):
-        """Wrapper to add arguments to both the main and the shadow argparser.
+        """Wrapper to add arguments and track whether they were passed on the command line.
         """
         if 'action' in kwargs and kwargs['action'] == 'store_boolean':
             return handle_store_boolean(self, *args, **kwargs)
 
-        if kwargs.get('add_dest', True) and args[0][0] == '-':
-            kwargs['dest'] = 'general_' + self.get_argument_name(*args, **kwargs)
-        if 'add_dest' in kwargs:
-            del kwargs['add_dest']
-
         self.acquire_lock()
-        self._arg_parser.add_argument(*args, **kwargs)
 
-        # Populate the shadow parser
-        if 'default' in kwargs:
-            del kwargs['default']
-        if 'action' in kwargs and kwargs['action'] == 'store_false':
-            kwargs['action'] == 'store_true'
-        self._arg_defaults.add_argument(*args, **kwargs)
+        self._arg_parser.add_argument(*args, **kwargs)
+        if 'general' not in self.default_arguments:
+            self.default_arguments['general'] = {}
+        self.default_arguments['general'][self.get_argument_name(*args, **kwargs)] = kwargs.get('default')
+
         self.release_lock()
 
     def initialize_logging(self):
@@ -374,15 +366,14 @@ class MILC(object):
         self.add_argument('--log-file-fmt', default='[%(levelname)s] [%(asctime)s] [file:%(pathname)s] [line:%(lineno)d] %(message)s', help='Format string for log file.')
         self.add_argument('--log-file', help='File to write log messages to')
         self.add_argument('--color', action='store_boolean', default=True, help='color in output')
-        self.add_argument('-c', '--config-file', help='The config file to read and/or write')
-        self.add_argument('--save-config', action='store_true', help='Save the running configuration to the config file')
+        self.add_argument('--config-file', help='The location for the configuration file')
+        self.arg_only.append('config_file')
 
     def add_subparsers(self, title='Sub-commands', **kwargs):
         if self._inside_context_manager:
             raise RuntimeError('You must run this before the with statement!')
 
         self.acquire_lock()
-        self._subparsers_default = self._arg_defaults.add_subparsers(title=title, dest='subparsers', **kwargs)
         self._subparsers = self._arg_parser.add_subparsers(title=title, dest='subparsers', **kwargs)
         self.release_lock()
 
@@ -404,10 +395,12 @@ class MILC(object):
         if self.config_file:
             return self.config_file
 
-        if self.args and self.args.general_config_file:
-            return self.args.general_config_file
+        if '--config-file' in sys.argv:
+            return Path(sys.argv[sys.argv.index('--config-file') + 1]).expanduser().resolve()
 
-        return os.path.join(user_config_dir(appname='qmk', appauthor='QMK'), '%s.ini' % self.prog_name)
+        filedir = user_config_dir(appname='qmk', appauthor='QMK')
+        filename = '%s.ini' % self.prog_name
+        return Path(filedir) / filename
 
     def get_argument_name(self, *args, **kwargs):
         """Takes argparse arguments and returns the dest name.
@@ -446,7 +439,7 @@ class MILC(object):
     def arg_passed(self, arg):
         """Returns True if arg was passed on the command line.
         """
-        return self.args_passed[arg] in (None, False)
+        return self.default_arguments.get(arg) != self.args[arg]
 
     def parse_args(self):
         """Parse the CLI args.
@@ -459,25 +452,22 @@ class MILC(object):
 
         self.acquire_lock()
         self.args = self._arg_parser.parse_args()
-        self.args_passed = self._arg_defaults.parse_args()
 
         if 'entrypoint' in self.args:
             self._entrypoint = self.args.entrypoint
 
-        if self.args.general_config_file:
-            self.config_file = self.args.general_config_file
-
         self.release_lock()
 
-    def read_config(self):
-        """Parse the configuration file and determine the runtime configuration.
+    def read_config_file(self):
+        """Read in the configuration file and store it in self.config.
         """
         self.acquire_lock()
+        self.config = Configuration()
         self.config_file = self.find_config_file()
 
-        if self.config_file and os.path.exists(self.config_file):
+        if self.config_file and self.config_file.exists():
             config = RawConfigParser(self.config)
-            config.read(self.config_file)
+            config.read(str(self.config_file))
 
             # Iterate over the config file options and write them into self.config
             for section in config.sections():
@@ -487,8 +477,10 @@ class MILC(object):
                     # Coerce values into useful datatypes
                     if value.lower() in ['1', 'yes', 'true', 'on']:
                         value = True
-                    elif value.lower() in ['0', 'no', 'false', 'none', 'off']:
+                    elif value.lower() in ['0', 'no', 'false', 'off']:
                         value = False
+                    elif value.lower() in ['none']:
+                        continue
                     elif value.replace('.', '').isdigit():
                         if '.' in value:
                             value = Decimal(value)
@@ -497,32 +489,44 @@ class MILC(object):
 
                     self.config[section][option] = value
 
-        # Fold the CLI args into self.config
+        self.release_lock()
+
+    def merge_args_into_config(self):
+        """Merge CLI arguments into self.config to create the runtime configuration.
+        """
+        self.acquire_lock()
         for argument in vars(self.args):
             if argument in ('subparsers', 'entrypoint'):
                 continue
 
-            if '_' in argument:
-                section, option = argument.split('_', 1)
-            else:
-                section = self._entrypoint.__name__
-                option = argument
+            if argument not in self.arg_only:
+                # Find the argument's section
+                if self._entrypoint.__name__ in self.default_arguments and argument in self.default_arguments[self._entrypoint.__name__]:
+                    argument_found = True
+                    section = self._entrypoint.__name__
+                if argument in self.default_arguments['general']:
+                    argument_found = True
+                    section = 'general'
 
-            if option not in self.arg_only:
-                if hasattr(self.args_passed, argument):
+                if not argument_found:
+                    raise RuntimeError('Could not find argument in `self.default_arguments`. This should be impossible!')
+                    exit(1)
+
+                # Merge this argument into self.config
+                if argument in self.default_arguments:
                     arg_value = getattr(self.args, argument)
                     if arg_value:
-                        self.config[section][option] = arg_value
+                        self.config[section][argument] = arg_value
                 else:
-                    if option not in self.config[section]:
-                        self.config[section][option] = getattr(self.args, argument)
+                    if argument not in self.config[section]:
+                        self.config[section][argument] = getattr(self.args, argument)
 
         self.release_lock()
 
     def save_config(self):
         """Save the current configuration to the config file.
         """
-        self.log.debug("Saving config file to '%s'", self.config_file)
+        self.log.debug("Saving config file to '%s'", str(self.config_file))
 
         if not self.config_file:
             self.log.warning('%s.config_file file not set, not saving config!', self.__class__.__name__)
@@ -530,31 +534,34 @@ class MILC(object):
 
         self.acquire_lock()
 
+        # Generate a sanitized version of our running configuration
         config = RawConfigParser()
-        config_dir = os.path.dirname(self.config_file)
-
         for section_name, section in self.config._config.items():
             config.add_section(section_name)
             for option_name, value in section.items():
                 if section_name == 'general':
-                    if option_name in ['save_config']:
+                    if option_name in ['config_file']:
                         continue
-                config.set(section_name, option_name, str(value))
+                if value is not None:
+                    config.set(section_name, option_name, str(value))
 
-        if not os.path.exists(config_dir):
-            os.makedirs(config_dir)
+        # Write out the config file
+        config_dir = self.config_file.parent
+        if not config_dir.exists():
+            config_dir.mkdir(parents=True, exist_ok=True)
 
-        with NamedTemporaryFile(mode='w', dir=config_dir, delete=False) as tmpfile:
+        with NamedTemporaryFile(mode='w', dir=str(config_dir), delete=False) as tmpfile:
             config.write(tmpfile)
 
         # Move the new config file into place atomically
         if os.path.getsize(tmpfile.name) > 0:
-            os.rename(tmpfile.name, self.config_file)
+            os.rename(tmpfile.name, str(self.config_file))
         else:
-            self.log.warning('Config file saving failed, not replacing %s with %s.', self.config_file, tmpfile.name)
+            self.log.warning('Config file saving failed, not replacing %s with %s.', str(self.config_file), tmpfile.name)
 
+        # Housekeeping
         self.release_lock()
-        cli.log.info('Wrote configuration to %s', shlex.quote(self.config_file))
+        cli.log.info('Wrote configuration to %s', shlex.quote(str(self.config_file)))
 
     def __call__(self):
         """Execute the entrypoint function.
@@ -603,16 +610,11 @@ class MILC(object):
             name = handler.__name__.replace("_", "-")
 
         self.acquire_lock()
+
         kwargs['help'] = description
-        self.subcommands_default[name] = self._subparsers_default.add_parser(name, **kwargs)
         self.subcommands[name] = SubparserWrapper(self, name, self._subparsers.add_parser(name, **kwargs))
         self.subcommands[name].set_defaults(entrypoint=handler)
 
-        if name not in self.__dict__:
-            self.__dict__[name] = self.subcommands[name]
-        else:
-            self.log.debug("Could not add subcommand '%s' to attributes, key already exists!", name)
-
         self.release_lock()
 
         return handler
@@ -620,7 +622,6 @@ class MILC(object):
     def subcommand(self, description, **kwargs):
         """Decorator to register a subcommand.
         """
-
         def subcommand_function(handler):
             return self.add_subcommand(handler, description, **kwargs)
 
@@ -644,9 +645,9 @@ class MILC(object):
         self.log_format = self.config['general']['log_fmt']
 
         if self.config.general.color:
-            self.log_format = ANSIEmojiLoglevelFormatter(self.args.general_log_fmt, self.config.general.datetime_fmt)
+            self.log_format = ANSIEmojiLoglevelFormatter(self.args.log_fmt, self.config.general.datetime_fmt)
         else:
-            self.log_format = ANSIStrippingFormatter(self.args.general_log_fmt, self.config.general.datetime_fmt)
+            self.log_format = ANSIStrippingFormatter(self.args.log_fmt, self.config.general.datetime_fmt)
 
         if self.log_file:
             self.log_file_handler = logging.FileHandler(self.log_file, self.log_file_mode)
@@ -673,13 +674,9 @@ class MILC(object):
 
         colorama.init()
         self.parse_args()
-        self.read_config()
+        self.merge_args_into_config()
         self.setup_logging()
 
-        if 'save_config' in self.config.general and self.config.general.save_config:
-            self.save_config()
-            exit(0)
-
         return self
 
     def __exit__(self, exc_type, exc_val, exc_tb):

lib/python/qmk/cli/__init__.py

@@ -7,6 +7,7 @@ from . import compile
 from . import config
 from . import docs
 from . import doctor
+from . import flash
 from . import hello
 from . import json
 from . import list

lib/python/qmk/cli/compile.py

@@ -9,6 +9,9 @@ import subprocess
 from argparse import FileType
 
 from milc import cli
+from qmk.commands import create_make_command
+from qmk.commands import parse_configurator_json
+from qmk.commands import compile_configurator_json
 
 import qmk.keymap
 import qmk.path
@@ -30,20 +33,20 @@ def compile(cli):
     """
     if cli.args.filename:
         # Parse the configurator json
-        user_keymap = json.load(cli.args.filename)
+        user_keymap = parse_configurator_json(cli.args.filename)
 
         # Generate the keymap
         keymap_path = qmk.path.keymap(user_keymap['keyboard'])
         cli.log.info('Creating {fg_cyan}%s{style_reset_all} keymap in {fg_cyan}%s', user_keymap['keymap'], keymap_path)
-        qmk.keymap.write(user_keymap['keyboard'], user_keymap['keymap'], user_keymap['layout'], user_keymap['layers'])
-        cli.log.info('Wrote keymap to {fg_cyan}%s/%s/keymap.c', keymap_path, user_keymap['keymap'])
 
         # Compile the keymap
-        command = ['make', ':'.join((user_keymap['keyboard'], user_keymap['keymap']))]
+        command = compile_configurator_json(cli.args.filename)
+
+        cli.log.info('Wrote keymap to {fg_cyan}%s/%s/keymap.c', keymap_path, user_keymap['keymap'])
 
     elif cli.config.compile.keyboard and cli.config.compile.keymap:
         # Generate the make command for a specific keyboard/keymap.
-        command = ['make', ':'.join((cli.config.compile.keyboard, cli.config.compile.keymap))]
+        command = create_make_command(cli.config.compile.keyboard, cli.config.compile.keymap)
 
     else:
         cli.log.error('You must supply a configurator export or both `--keyboard` and `--keymap`.')

lib/python/qmk/cli/flash.py

@@ -0,0 +1,88 @@
+"""Compile and flash QMK Firmware
+
+You can compile a keymap already in the repo or using a QMK Configurator export.
+A bootloader must be specified.
+"""
+import os
+import sys
+import subprocess
+from argparse import FileType
+
+from milc import cli
+from qmk.commands import create_make_command
+from qmk.commands import parse_configurator_json
+from qmk.commands import compile_configurator_json
+
+import qmk.path
+
+
+def print_bootloader_help():
+    """Prints the available bootloaders listed in docs.qmk.fm.
+    """
+    cli.log.info('Here are the available bootloaders:')
+    cli.echo('\tdfu')
+    cli.echo('\tdfu-ee')
+    cli.echo('\tdfu-split-left')
+    cli.echo('\tdfu-split-right')
+    cli.echo('\tavrdude')
+    cli.echo('\tBootloadHID')
+    cli.echo('\tdfu-util')
+    cli.echo('\tdfu-util-split-left')
+    cli.echo('\tdfu-util-split-right')
+    cli.echo('\tst-link-cli')
+    cli.echo('For more info, visit https://docs.qmk.fm/#/flashing')
+
+
+@cli.argument('-bl', '--bootloader', default='flash', help='The flash command, corresponding to qmk\'s make options of bootloaders.')
+@cli.argument('filename', nargs='?', arg_only=True, help='The configurator export JSON to compile. Use this if you dont want to specify a keymap and keyboard.')
+@cli.argument('-km', '--keymap', help='The keymap to build a firmware for. Use this if you dont have a configurator file. Ignored when a configurator file is supplied.')
+@cli.argument('-kb', '--keyboard', help='The keyboard to build a firmware for. Use this if you dont have a configurator file. Ignored when a configurator file is supplied.')
+@cli.argument('-b', '--bootloaders', action='store_true', help='List the available bootloaders.')
+@cli.subcommand('QMK Flash.')
+def flash(cli):
+    """Compile and or flash QMK Firmware or keyboard/layout
+
+    If a Configurator JSON export is supplied this command will create a new keymap. Keymap and Keyboard arguments
+    will be ignored.
+
+    If no file is supplied, keymap and keyboard are expected.
+
+    If bootloader is omitted, the one according to the rules.mk will be used.
+
+    """
+    command = []
+    if cli.args.bootloaders:
+        # Provide usage and list bootloaders
+        cli.echo('usage: qmk flash [-h] [-b] [-kb KEYBOARD] [-km KEYMAP] [-bl BOOTLOADER] [filename]')
+        print_bootloader_help()
+        return False
+
+    elif cli.args.keymap and not cli.args.keyboard:
+        # If only a keymap was given but no keyboard, suggest listing keyboards
+        cli.echo('usage: qmk flash [-h] [-b] [-kb KEYBOARD] [-km KEYMAP] [-bl BOOTLOADER] [filename]')
+        cli.log.error('run \'qmk list_keyboards\' to find out the supported keyboards')
+        return False
+
+    elif cli.args.filename:
+        # Get keymap path to log info
+        user_keymap = parse_configurator_json(cli.args.filename)
+        keymap_path = qmk.path.keymap(user_keymap['keyboard'])
+
+        cli.log.info('Creating {fg_cyan}%s{style_reset_all} keymap in {fg_cyan}%s', user_keymap['keymap'], keymap_path)
+
+        # Convert the JSON into a C file and write it to disk.
+        command = compile_configurator_json(cli.args.filename, cli.args.bootloader)
+
+        cli.log.info('Wrote keymap to {fg_cyan}%s/%s/keymap.c', keymap_path, user_keymap['keymap'])
+
+    elif cli.args.keyboard and cli.args.keymap:
+        # Generate the make command for a specific keyboard/keymap.
+        command = create_make_command(cli.config.flash.keyboard, cli.config.flash.keymap, cli.args.bootloader)
+
+    else:
+        cli.echo('usage: qmk flash [-h] [-b] [-kb KEYBOARD] [-km KEYMAP] [-bl BOOTLOADER] [filename]')
+        cli.log.error('You must supply a configurator export or both `--keyboard` and `--keymap`. You can also specify a bootloader with --bootloader. Use --bootloaders to list the available bootloaders.')
+        return False
+
+    cli.log.info('Flashing keymap with {fg_cyan}%s\n\n', ' '.join(command))
+    subprocess.run(command)

lib/python/qmk/commands.py

@@ -0,0 +1,59 @@
+"""Functions that build make commands
+"""
+import json
+import qmk.keymap
+
+
+def create_make_command(keyboard, keymap, target=None):
+    """Create a make compile command
+
+    Args:
+        keyboard
+            The path of the keyboard, for example 'plank'
+
+        keymap
+            The name of the keymap, for example 'algernon'
+
+        target
+            Usually a bootloader.
+
+    Returns:
+        A command that can be run to make the specified keyboard and keymap
+    """
+    if target is None:
+        return ['make', ':'.join((keyboard, keymap))]
+    return ['make', ':'.join((keyboard, keymap, target))]
+
+
+def parse_configurator_json(configurator_filename):
+    """Open and parse a configurator json export
+    """
+    file = open(configurator_filename)
+    user_keymap = json.load(file)
+    file.close()
+    return user_keymap
+
+
+def compile_configurator_json(configurator_filename, bootloader=None):
+    """Convert a configurator export JSON file into a C file
+
+    Args:
+        configurator_filename
+            The configurator JSON export file
+
+        bootloader
+            A bootloader to flash
+
+    Returns:
+        A command to run to compile and flash the C file.
+    """
+    # Parse the configurator json
+    user_keymap = parse_configurator_json(configurator_filename)
+
+    # Write the keymap C file
+    qmk.keymap.write(user_keymap['keyboard'], user_keymap['keymap'], user_keymap['layout'], user_keymap['layers'])
+
+    # Return a command that can be run to make the keymap and flash if given
+    if bootloader is None:
+        return create_make_command(user_keymap['keyboard'], user_keymap['keymap'])
+    return create_make_command(user_keymap['keyboard'], user_keymap['keymap'], bootloader)