Make PREVENT_STUCK_MODIFIERS the default (#3107 )

* Remove chording as it is not documented, not used, and needs work. * Make Leader Key an optional feature. * Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE` * Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
Keyboard: add ergodash mini keyboard (#3901 )
2018-09-17 13:48:02 -04:00 · 2018-09-15 10:57:46 -07:00 · 2018-09-15 10:50:38 -07:00 · 2018-09-15 10:15:36 -07:00 · 2018-09-15 10:14:39 -07:00 · 2018-09-15 10:12:11 -07:00
245 changed files with 3169 additions and 670 deletions
--- a/common_features.mk
+++ b/common_features.mk
@@ -221,7 +221,6 @@ ifeq ($(strip $(USB_HID_ENABLE)), yes)
    include $(TMK_DIR)/protocol/usb_hid.mk
 endif

-
 ifeq ($(strip $(HD44780_ENABLE)), yes)
    SRC += drivers/avr/hd44780.c
    OPT_DEFS += -DHD44780_ENABLE
@@ -232,11 +231,15 @@ ifeq ($(strip $(DYNAMIC_KEYMAP_ENABLE)), yes)
    SRC += $(QUANTUM_DIR)/dynamic_keymap.c
 endif

+ifeq ($(strip $(LEADER_ENABLE)), yes)
+  SRC += $(QUANTUM_DIR)/process_keycode/process_leader.c
+  OPT_DEFS += -DLEADER_ENABLE
+endif
+
 QUANTUM_SRC:= \
    $(QUANTUM_DIR)/quantum.c \
    $(QUANTUM_DIR)/keymap_common.c \
-    $(QUANTUM_DIR)/keycode_config.c \
-    $(QUANTUM_DIR)/process_keycode/process_leader.c
+    $(QUANTUM_DIR)/keycode_config.c

 ifndef CUSTOM_MATRIX
    ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
@@ -251,5 +254,5 @@ ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
    QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
                $(QUANTUM_DIR)/split_common/split_util.c \
                $(QUANTUM_DIR)/split_common/i2c.c \
-                $(QUANTUM_DIR)/split_common/serial.c  
+                $(QUANTUM_DIR)/split_common/serial.c
 endif
--- a/docs/config_options.md
+++ b/docs/config_options.md
@@ -119,8 +119,8 @@ If you define these options you will enable the associated feature, which may in

 * `#define FORCE_NKRO`
  * NKRO by default requires to be turned on, this forces it on during keyboard startup regardless of EEPROM setting. NKRO can still be turned off but will be turned on again if the keyboard reboots.
-* `#define PREVENT_STUCK_MODIFIERS`
-  * stores the layer a key press came from so the same layer is used when the key is released, regardless of which layers are enabled
+* `#define STRICT_LAYER_RELEASE`
+  * force a key release to be evaluated using the current layer stack instead of remembering which layer it came from (used for advanced cases)

 ## Behaviors That Can Be Configured

--- a/docs/contributing.md
+++ b/docs/contributing.md
@@ -70,6 +70,7 @@ Most of our style is pretty easy to pick up on, but right now it's not entirely
  * Do not write obvious comments
  * If you not sure if a comment is obvious, go ahead and include it.
 * In general we don't wrap lines, they can be as long as needed. If you do choose to wrap lines please do not wrap any wider than 76 columns.
+* We use `#pragma once` at the start of header files rather than old-style include guards (`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`)

 # General Guidelines

--- a/docs/feature_leader_key.md
+++ b/docs/feature_leader_key.md
@@ -39,3 +39,11 @@ void matrix_scan_user(void) {
 As you can see, you have a few function. You can use `SEQ_ONE_KEY` for single-key sequences (Leader followed by just one key), and `SEQ_TWO_KEYS`, `SEQ_THREE_KEYS` up to `SEQ_FIVE_KEYS` for longer sequences.

 Each of these accepts one or more keycodes as arguments. This is an important point: You can use keycodes from **any layer on your keyboard**. That layer would need to be active for the leader macro to fire, obviously.
+
+## Adding Leader Key Support in the `rules.mk`
+
+To add support for Leader Key you simply need to add a single line to your keymap's `rules.mk`:
+
+```
+LEADER_ENABLE = yes
+```
--- a/docs/understanding_qmk.md
+++ b/docs/understanding_qmk.md
@@ -129,6 +129,7 @@ Comparing against our keymap we can see that the pressed key is KC_NLCK. From he
 <!-- FIXME: Magic happens between here and process_record -->

 ##### Process Record
+
 The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions.  Depending on options set in rule.mk or elsewhere, only a subset of the functions below will be included in final firmware.

 * [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/tmk_core/common/action.c#L172)
@@ -146,7 +147,6 @@ The `process_record()` function itself is deceptively simple, but hidden within
    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_music.c#L114)
    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_tap_dance.c#L136)
    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_leader.c#L38)
-    * [`bool process_chording(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_chording.c#L41)
    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_combo.c#L115)
    * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicode.c#L22)
    * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_ucis.c#L91)
--- a/keyboards/1upkeyboards/1up60rgb/config.h
+++ b/keyboards/1upkeyboards/1up60rgb/config.h
@@ -43,9 +43,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
--- a/keyboards/1upkeyboards/sweet16/config.h
+++ b/keyboards/1upkeyboards/sweet16/config.h
@@ -9,7 +9,7 @@
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    1up Keyboards
 #define PRODUCT         Sweet16
-#define DESCRIPTION     4x4 grid 
+#define DESCRIPTION     4x4 grid

 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -43,9 +43,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN B1
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -55,4 +52,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif

-#endif
+#endif
--- a/keyboards/acr60/config.h
+++ b/keyboards/acr60/config.h
@@ -41,9 +41,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 20
--- a/keyboards/alf/x2/config.h
+++ b/keyboards/alf/x2/config.h
@@ -43,9 +43,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -55,4 +52,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif

-#endif
+#endif
--- a/keyboards/alpha/config.h
+++ b/keyboards/alpha/config.h
@@ -43,8 +43,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS

 #define RGB_DI_PIN F4
 #ifdef RGB_DI_PIN
--- a/keyboards/alu84/config.h
+++ b/keyboards/alu84/config.h
@@ -59,9 +59,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLED_NUM 16
--- a/keyboards/at101_blackheart/config.h
+++ b/keyboards/at101_blackheart/config.h
@@ -38,6 +38,3 @@
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
-
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
--- a/keyboards/atreus/keymaps/jeremy/keymap.c
+++ b/keyboards/atreus/keymaps/jeremy/keymap.c
@@ -4,8 +4,6 @@
 #include "action_layer.h"
 #include "keymap_colemak.h"

-#define PREVENT_STUCK_MODIFIERS
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 #define ALPH 0
 #define NUMS 1
--- a/keyboards/atreus/keymaps/khitsule/config.h
+++ b/keyboards/atreus/keymaps/khitsule/config.h
@@ -3,8 +3,6 @@

 #include "../../config.h"

-#define PREVENT_STUCK_MODIFIERS
-
 #define IGNORE_MOD_TAP_INTERRUPT

-#endif
+#endif
--- a/keyboards/atreus/keymaps/xk/config.h
+++ b/keyboards/atreus/keymaps/xk/config.h
@@ -30,8 +30,7 @@ the Free Software Foundation, either version 2 of the License, or
 #define MOUSEKEY_WHEEL_MAX_SPEED   8
 #define MOUSEKEY_WHEEL_TIME_TO_MAX 40

-#define PREVENT_STUCK_MODIFIERS
 #define IGNORE_MOD_TAP_INTERRUPT
 #define PERMISSIVE_HOLD

-#endif
+#endif
--- a/keyboards/atreus62/keymaps/mneme/config.h
+++ b/keyboards/atreus62/keymaps/mneme/config.h
@@ -1,6 +1,5 @@
 #define ONESHOT_TIMEOUT 3000
 #define TAPPING_TERM 200
-#define PREVENT_STUCK_MODIFIERS
 #define FORCE_NKRO
 #define LEADER_TIMEOUT 1000

--- a/keyboards/atreus62/keymaps/mneme/rules.mk
+++ b/keyboards/atreus62/keymaps/mneme/rules.mk
@@ -3,3 +3,4 @@ NKRO_ENABLE = true
 MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = no
+LEADER_ENABLE = yes
--- a/keyboards/bfo9000/keymaps/andylikescandy6x18/config.h
+++ b/keyboards/bfo9000/keymaps/andylikescandy6x18/config.h
@@ -37,7 +37,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #define PERMISSIVE_HOLD

- #define PREVENT_STUCK_MODIFIERS
-
-
 #endif
--- a/keyboards/bigseries/1key/config.h
+++ b/keyboards/bigseries/1key/config.h
@@ -47,9 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    false \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
--- a/keyboards/bigseries/2key/config.h
+++ b/keyboards/bigseries/2key/config.h
@@ -47,9 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    false \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
--- a/keyboards/bigseries/3key/config.h
+++ b/keyboards/bigseries/3key/config.h
@@ -47,9 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    false \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
--- a/keyboards/bigseries/4key/config.h
+++ b/keyboards/bigseries/4key/config.h
@@ -47,9 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    false \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
--- a/keyboards/bigswitch/config.h
+++ b/keyboards/bigswitch/config.h
@@ -47,8 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    false \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS

 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
--- a/keyboards/catch22/config.h
+++ b/keyboards/catch22/config.h
@@ -46,9 +46,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    false \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN F6
 #define RGBLIGHT_ANIMATIONS
--- a/keyboards/chimera_ergo/config.h
+++ b/keyboards/chimera_ergo/config.h
@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *  These options are also useful to firmware size reduction.
 */

-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG

--- a/keyboards/chimera_ls/config.h
+++ b/keyboards/chimera_ls/config.h
@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *  These options are also useful to firmware size reduction.
 */

-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG

--- a/keyboards/chimera_ortho/config.h
+++ b/keyboards/chimera_ortho/config.h
@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *  These options are also useful to firmware size reduction.
 */

-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG

--- a/keyboards/chocopad/config.h
+++ b/keyboards/chocopad/config.h
@@ -40,10 +40,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 8
@@ -56,4 +52,4 @@
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD

-#endif
+#endif
--- a/keyboards/clueboard/60/config.h
+++ b/keyboards/clueboard/60/config.h
@@ -49,9 +49,6 @@
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 6

-/* Prevent modifiers from being stuck on after layer changes. */
-#define PREVENT_STUCK_MODIFIERS
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 //#define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
--- a/keyboards/clueboard/66/keymaps/bloodlvst/config.h
+++ b/keyboards/clueboard/66/keymaps/bloodlvst/config.h
@@ -3,6 +3,5 @@

 #include "../../config.h"

-#define PREVENT_STUCK_MODIFIERS
 #define DISABLE_SPACE_CADET_ROLLOVER
 #endif
--- a/keyboards/comet46/config.h
+++ b/keyboards/comet46/config.h
@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *  These options are also useful to firmware size reduction.
 */

-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG

--- a/keyboards/contra/config.h
+++ b/keyboards/contra/config.h
@@ -43,10 +43,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0
--- a/keyboards/contra/keymaps/ryanm101/config.h
+++ b/keyboards/contra/keymaps/ryanm101/config.h
@@ -3,7 +3,6 @@

 #include "config_common.h"

-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_TERM 200

 #ifdef AUDIO_ENABLE
@@ -28,7 +27,7 @@
 /* enable basic MIDI features:
   - MIDI notes can be sent when in Music mode is on
 */
-                                
+
 #define MIDI_BASIC

 /* enable advanced MIDI features:
@@ -42,4 +41,4 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 2

-#endif
+#endif
--- a/keyboards/crawlpad/config.h
+++ b/keyboards/crawlpad/config.h
@@ -40,9 +40,6 @@
    false \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
--- a/keyboards/crkbd/keymaps/default/config.h
+++ b/keyboards/crkbd/keymaps/default/config.h
@@ -36,7 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #define USE_SERIAL_PD2

-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100

--- a/keyboards/dichotemy/config.h
+++ b/keyboards/dichotemy/config.h
@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *  These options are also useful to firmware size reduction.
 */

-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG

--- a/keyboards/dilly/config.h
+++ b/keyboards/dilly/config.h
@@ -43,10 +43,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 8
@@ -59,4 +55,4 @@
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD

-#endif
+#endif
--- a/keyboards/dz60/config.h
+++ b/keyboards/dz60/config.h
@@ -41,9 +41,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 16
--- a/keyboards/dz60/keymaps/LEdiodes/config.h
+++ b/keyboards/dz60/keymaps/LEdiodes/config.h
@@ -41,9 +41,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 16
--- a/keyboards/dz60/keymaps/macos_arrow/keymap.c
+++ b/keyboards/dz60/keymaps/macos_arrow/keymap.c
@@ -1,9 +1,9 @@
 #include QMK_KEYBOARD_H

-#define ______ KC_TRNS
-#define _BL 0
-#define _FL 1
-#define _ML 2
+#define _BL 0 // Base layer
+#define _FL 1 // Function layer
+#define _ML 2 // Media layer
+#define _NL 2 // Numpad layer

 enum my_keycodes {
  BR_UP = SAFE_RANGE,
@@ -12,45 +12,45 @@ enum my_keycodes {

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  /* ,-----------------------------------------------------------------------------------------.
-   * | Esc | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -   | =   | Backspace |
+   * |  `  | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -   | =   | Backspace |
   * |-----------------------------------------------------------------------------------------+
   * | Tab    | Q   | W   | E   | R   | T   | Y   | U   | I   | O   | P   | [   | ]   |   \    |
   * |-----------------------------------------------------------------------------------------+
-   * | _FL      | A   | S   | D   | F   | G   | H   | J   | K   | L   | ;   | '   | Enter      |
+   * | Esc/_FL  | A   | S   | D   | F   | G   | H   | J   | K   | L   | ;   | '   | Enter      |
   * |-----------------------------------------------------------------------------------------+
-   * | Shift     | Z   | X   | C   | V   | B   | N   | M   | ,   | .   | /   | _ML | Up  |Shift|
+   * | Shift     | Z   | X   | C   | V   | B   | N   | M   | ,   | .   | /   |     | Up  |Shift|
   * |-----------------------------------------------------------------------------------------+
-   * | Ctrl | Alt  | Gui  |                Space               |Gui/_ML| Alt | Left| Down|Right|
+   * | Ctrl | Alt  | Gui  |             Space / _NL            |Gui/_ML| Alt | Left| Down|Right|
   * `-----------------------------------------------------------------------------------------'
   */
  [_BL] = LAYOUT_2_shifts(
-    KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
+    KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
-    MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
-    KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_ML), KC_UP, KC_RSFT,
-    KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, LM(_ML, MOD_RGUI), KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),
+    LT(_FL, KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+    KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_A, KC_UP, KC_RSFT,
+    KC_LCTL, KC_LALT, KC_LGUI, KC_NO, LT(_NL, KC_SPC), KC_NO, LM(_ML, MOD_RGUI), KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),

  /* ,-----------------------------------------------------------------------------------------.
-   * |  `  | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |    Del    |
+   * |     | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |    Del    |
   * |-----------------------------------------------------------------------------------------+
-   * |        |     |     |     |     |     |     |     | UP  |     |     |     |     |        |
+   * |        |     |     |     |     |     |     |PgUp |     |     |     |     |     |        |
   * |-----------------------------------------------------------------------------------------+
-   * |          |     |     |     |     |     |     | Left| Down|Right|     |     |            |
+   * |          |     |     |     |     |     | Left| Down|  Up |Right|     |     |            |
   * |-----------------------------------------------------------------------------------------+
-   * |           |     |     |     |     |     |     |     |     |     |     |     |     |     |
+   * |           |     |     |     |     |     |     |PgDwn|     |     |     |     |     |     |
   * |-----------------------------------------------------------------------------------------+
   * |      |      |      |                                      |     |     |     |     |     |
   * `-----------------------------------------------------------------------------------------'
   */
-  [_FL] = LAYOUT(
-    KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ______, KC_DEL,
-    ______, ______, ______, ______, ______, ______, ______, ______, KC_UP, ______, ______, ______, ______, ______,
-    ______, ______, ______, ______, ______, ______, ______, KC_LEFT, KC_DOWN, KC_RIGHT, ______, ______, ______,
-    ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,
-    ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______),
+  [_FL] = LAYOUT_2_shifts(
+    _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL,
+    _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______, _______,
+    _______, KC_NO,  _______, _______, _______, _______, _______, _______, KC_PGDN, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),

  /* ,-----------------------------------------------------------------------------------------.
-   * |Eject| BR- | BR+ | F3  | F4  |     |     |PREV |PLAY |NEXT |MUTE | V- | V+ |             |
+   * |Eject| BR- | BR+ |     |     |     |     |PREV |PLAY |NEXT |MUTE | V- | V+ |             |
   * |-----------------------------------------------------------------------------------------+
   * |        |     |     |     |     |     |     |     |     |     |     |     |     |  Reset |
   * |-----------------------------------------------------------------------------------------+
@@ -61,12 +61,31 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   * |      |      |      |                                      |     |     |     |     |     |
   * `-----------------------------------------------------------------------------------------'
   */
-  [_ML] = LAYOUT(
-    KC_MEDIA_EJECT, BR_DOWN, BR_UP, ______, ______, KC_F5, KC_F6, KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, ______, ______,
-    ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, RESET,
-    ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,
-    ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,
-    ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______),
+  [_ML] = LAYOUT_2_shifts(
+    KC_MEDIA_EJECT, BR_DOWN, BR_UP, _______, _______, _______, _______, KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, KC_NO, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, KC_NO,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+
+  /* ,-----------------------------------------------------------------------------------------.
+   * |     |     |     |     |     |     |     |     |  %  |  (  |  )  |  < |  > |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |        |     |     |     |     |     |     |  *  |  0  |  1  |  2  |  3  |     |        |
+   * |-----------------------------------------------------------------------------------------+
+   * |          |     |     |     |     |     |     |  .  |  -  |  4  |  5  |  6  |            |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |     |     |     |     |     |     |  ,  |  =  |  7  |  8  |  9  |     |     |
+   * |-----------------------------------------------------------------------------------------+
+   * |      |      |      |                                      |     |     |     |     |     |
+   * `-----------------------------------------------------------------------------------------'
+   */
+  [_NL] = LAYOUT_2_shifts(
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_PERCENT, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_LEFT_ANGLE_BRACKET, KC_RIGHT_ANGLE_BRACKET, KC_NO, _______,
+    _______, _______, _______, _______, _______, _______, _______, KC_ASTERISK, KC_0, KC_1, KC_2, KC_3, _______, RESET,
+    _______, _______, _______, _______, _______, _______, _______, KC_DOT, KC_MINS, KC_4, KC_5, KC_6, _______,
+    _______, KC_NO,  _______, _______, _______, _______, _______, _______, KC_COMMA, KC_EQL, KC_7, KC_8, KC_9, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
 };

 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
--- a/keyboards/dz60/keymaps/macos_arrow/readme.md
+++ b/keyboards/dz60/keymaps/macos_arrow/readme.md
@@ -15,21 +15,22 @@ My build used the following components:

 ```
 ,-----------------------------------------------------------------------------------------.
-| Esc | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -   | =   | Backspace |
+|  `  | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -   | =   | Backspace |
 |-----------------------------------------------------------------------------------------+
 | Tab    | Q   | W   | E   | R   | T   | Y   | U   | I   | O   | P   | [   | ]   |   \    |
 |-----------------------------------------------------------------------------------------+
-| _FL      | A   | S   | D   | F   | G   | H   | J   | K   | L   | ;   | '   | Enter      |
+| _FL/Esc  | A   | S   | D   | F   | G   | H   | J   | K   | L   | ;   | '   | Enter      |
 |-----------------------------------------------------------------------------------------+
-| Shift     | Z   | X   | C   | V   | B   | N   | M   | ,   | .   | /   | _ML | Up  |Shift|
+| Shift     | Z   | X   | C   | V   | B   | N   | M   | ,   | .   | /   |     | Up  |Shift|
 |-----------------------------------------------------------------------------------------+
-| Ctrl | Alt  | Cmd  |                Space               |Cmd/_ML| Alt | Left| Down|Right|
+| Ctrl | Alt  | Cmd  |            _NL / Space             |Cmd/_ML| Alt | Left| Down|Right|
 `-----------------------------------------------------------------------------------------'
 ```

-* The escape key use `KC_GESC` to get grave accent on any letter with ``Alt+Esc`` and `` ` `` alone with the ``Hyper+Esc``. The `~` is obtained with `Shift+Esc`. `GRAVE_ESC_GUI_OVERRIDE` is define so `Cmd+Alt+Esc` can still work.
-* The `Caps-Lock` (`Hyper`) key switch to the function layer (`_FL`).
-* The right `Cmd` key is used to switch to the media layer (`_ML`) when used with keys mapped on that layer (the top row). Any other keys just act as a `Cmd+` that key.
+* The escape key is moved to the capslock to get keep grave letter pristine.
+* The `Caps-Lock` (`Hyper`) key switch to the function layer (`_FL`) or escape when used alone.
+* The right `Cmd` key is used to switch to the media layer (`_ML`) when used with keys mapped on that layer.
+* The space key can be used to switch to the numpad layer (`_NL`) when used with one of the mapped key on that layer.

 ## Function Layer (_FL)

@@ -37,9 +38,9 @@ My build used the following components:
 ,-----------------------------------------------------------------------------------------.
 |  `  | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |    Del    |
 |-----------------------------------------------------------------------------------------+
-|        |     |     |     |     |     |     |     | UP  |     |     |     |     |        |
+|        |     |     |     |     |     |     |PgDwn| PgUp|     |     |     |     |        |
 |-----------------------------------------------------------------------------------------+
-|          |     |     |     |     |     |     | Left| Down|Right|     |     |            |
+|          |     |     |     |     |     | Left| Down| Up  |Right|     |     |            |
 |-----------------------------------------------------------------------------------------+
 |           |     |     |     |     |     |     |     |     |     |     |     |     |     |
 |-----------------------------------------------------------------------------------------+
@@ -47,13 +48,13 @@ My build used the following components:
 `-----------------------------------------------------------------------------------------'
 ```

-The function layer is activated by the `Caps-Lock` (`Hyper`) key to access `F` keys. In addition, the `IJKL` are mapped as cursor keys on that layer.
+The function layer is activated by the `Caps-Lock` (`Hyper`) key to access `F` keys. In addition, the `HJKL` are mapped as cursor keys on that layer.

 ## Media Layer (_ML)

 ```
 ,-----------------------------------------------------------------------------------------.
-|     | BR- | BR+ | F3  | F4  |     |     |PREV |PLAY |NEXT |MUTE | V- | V+ |    Eject    |
+|Eject| BR- | BR+ |     |     |     |     |PREV |PLAY |NEXT |MUTE | V- | V+ |             |
 |-----------------------------------------------------------------------------------------+
 |        |     |     |     |     |     |     |     |     |     |     |     |     |  Reset |
 |-----------------------------------------------------------------------------------------+
@@ -67,4 +68,20 @@ The function layer is activated by the `Caps-Lock` (`Hyper`) key to access `F` k

 The media layer is activated by the right `Cmd` (`FN`) key. It contains the typical macos media keys on the top row. Blank keys act as `Cmd+` that key on the base layer.

+## Numpad Layer (_NL)

+```
+,-----------------------------------------------------------------------------------------.
+|     |     |     |     |     |     |     |     |  %  |  (  |  )  |  < |  > |             |
+|-----------------------------------------------------------------------------------------+
+|        |     |     |     |     |     |     |  *  |  0  |  1  |  2  |  3  |     |        |
+|-----------------------------------------------------------------------------------------+
+|          |     |     |     |     |     |     |  .  |  -  |  4  |  5  |  6  |            |
+|-----------------------------------------------------------------------------------------+
+|           |     |     |     |     |     |     |  ,  |  =  |  7  |  8  |  9  |     |     |
+|-----------------------------------------------------------------------------------------+
+|      |      |      |                                      |     |     |     |     |     |
+`-----------------------------------------------------------------------------------------'
+```
+
+The numpad layer is activated by the space bar, when hold.
--- a/keyboards/ergodash/ergodash.h
+++ b/keyboards/ergodash/ergodash.h
@@ -43,4 +43,22 @@
        )
 #endif // #ifdef KEYBOARD_ergodash_rev2

+#ifdef KEYBOARD_ergodash_mini
+    #include "mini.h"
+
+    // Used to create a keymap using only KC_ prefixed keys
+    #define LAYOUT_kc( \
+        L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+        L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+        L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+        L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36  \
+        ) \
+        LAYOUT( \
+            KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
+            KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
+            KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
+            KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, KC_##R36  \
+        )
+#endif // #ifdef KEYBOARD_ergodash_mini
+
 #endif
--- a/keyboards/ergodash/mini/config.h
+++ b/keyboards/ergodash/mini/config.h
@@ -0,0 +1,97 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Omkbd
+#define PRODUCT         ErgoDashmini
+#define DESCRIPTION     Power
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+#define C6_AUDIO
+#ifdef AUDIO_ENABLE
+  #define STARTUP_SONG SONG(STARTUP_SOUND)
+  #define GOODBYE_SONG SONG(GOODBYE_SOUND)
+#endif
+
+/* number of backlight levels */
+#ifdef BACKLIGHT_ENABLE
+  #define BACKLIGHT_PIN B6
+  #define BACKLIGHT_LEVELS 7
+//  #define BACKLIGHT_BREATHING
+//  #define BREATHING_PERIOD 4
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 20    // Number of LEDs
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
--- a/keyboards/ergodash/mini/info.json
+++ b/keyboards/ergodash/mini/info.json
@@ -0,0 +1,13 @@
+{
+  "keyboard_name": "ErgoDash mini",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 18,
+  "height": 6.25,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 56,
+      "layout": [{"label":"L00", "x":0, "y":1.375}, {"label":"L01", "x":1, "y":1.375}, {"label":"L02", "x":2, "y":1.125}, {"label":"L03", "x":3, "y":1}, {"label":"L04", "x":4, "y":1.125}, {"label":"L05", "x":5, "y":1.25}, {"label":"L06", "x":6, "y":1.75}, {"label":"R00", "x":11, "y":1.75}, {"label":"R01", "x":12, "y":1.25}, {"label":"R02", "x":13, "y":1.125}, {"label":"R03", "x":14, "y":1}, {"label":"R04", "x":15, "y":1.125}, {"label":"R05", "x":16, "y":1.375}, {"label":"R06", "x":17, "y":1.375}, {"label":"L10", "x":0, "y":2.375}, {"label":"L11", "x":1, "y":2.375}, {"label":"L12", "x":2, "y":2.125}, {"label":"L13", "x":3, "y":2}, {"label":"L14", "x":4, "y":2.125}, {"label":"L15", "x":5, "y":2.25}, {"label":"L16", "x":6, "y":2.75}, {"label":"R10", "x":11, "y":2.75}, {"label":"R11", "x":12, "y":2.25}, {"label":"R12", "x":13, "y":2.125}, {"label":"R13", "x":14, "y":2}, {"label":"R14", "x":15, "y":2.125}, {"label":"R15", "x":16, "y":2.375}, {"label":"R16", "x":17, "y":2.375}, {"label":"L20", "x":0, "y":3.375}, {"label":"L21", "x":1, "y":3.375}, {"label":"L22", "x":2, "y":3.125}, {"label":"L23", "x":3, "y":3}, {"label":"L24", "x":4, "y":3.125}, {"label":"L25", "x":5, "y":3.25}, {"label":"L26", "x":6.5, "y":4.25}, {"label":"R20", "x":10.5, "y":4.25}, {"label":"R21", "x":12, "y":3.25}, {"label":"R22", "x":13, "y":3.125}, {"label":"R23", "x":14, "y":3}, {"label":"R24", "x":15, "y":3.125}, {"label":"R25", "x":16, "y":3.375}, {"label":"R26", "x":17, "y":3.375}, {"label":"L30", "x":0, "y":4.375}, {"label":"L31", "x":1, "y":4.375}, {"label":"L32", "x":2, "y":4.125}, {"label":"L33", "x":3, "y":4}, {"label":"L34", "x":5.5, "y":5.25}, {"label":"L35", "x":6.5, "y":5.25}, {"label":"L36", "x":7.5, "y":4.25, "h":2}, {"label":"R30", "x":9.5, "y":4.25, "h":2}, {"label":"R31", "x":10.5, "y":5.25}, {"label":"R32", "x":11.5, "y":5.25}, {"label":"R33", "x":14, "y":4}, {"label":"R34", "x":15, "y":4.125}, {"label":"R35", "x":16, "y":4.375}, {"label":"R36", "x":17, "y":4.375}]
+    }
+  }
+}
--- a/keyboards/ergodash/mini/keymaps/default/config.h
+++ b/keyboards/ergodash/mini/keymaps/default/config.h
@@ -0,0 +1,39 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
--- a/keyboards/ergodash/mini/keymaps/default/keymap.c
+++ b/keyboards/ergodash/mini/keymaps/default/keymap.c
@@ -0,0 +1,129 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * |  Esc |   Q  |   W  |   E  |   R  |   T  |   -  |                    |   =  |   Y  |   U  |   I  |   O  |   P  |  \   |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * | Tab  |   A  |   S  |   D  |   F  |   G  |   [  |                    |   ]  |   H  |   J  |   K  |   L  |   ;  |  "   |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  | Space|                    | Enter|   N  |   M  |   ,  |   .  |   /  | Shift|
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|Delete|||||||| Bksp | Enter| Raise|||||||| Left | Down |  Up  | Right|
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   */
+  [_QWERTY] = LAYOUT( \
+    KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_MINS,                        KC_EQL , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS, \
+    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_LBRC,                        KC_RBRC, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC , KC_DEL,        KC_BSPC,KC_ENT , RAISE,            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+  ),
+
+  /* Lower
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * |   `  |   !  |   @  |   #  |   $  |   %  |   _  |                    |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * |   ~  |   1  |   2  |   3  |   4  |   5  |   {  |                    |   }  | Left | Down |  Up  | Right|   :  |  "   |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|Delete|||||||| Bksp | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   */
+  [_LOWER] = LAYOUT(
+    KC_GRV , KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
+    KC_TILD, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LCBR,                        KC_RCBR, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT, KC_COLN, KC_DQT , \
+    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC , KC_DEL,        KC_BSPC,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+  ),
+
+  /* Raise
+  * ,----------------------------------------------------------------------------------------------------------------------.
+  * |   `  |   !  |   @  |   #  |   $  |   %  |   _  |                    |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
+  * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+  * |   ~  |   F1 |   F2 |   F3 |   F4 |   F5 |   {  |                    |   }  | Left | Down |  Up  | Right|   :  |  "   |
+  * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+  * | Shift|   F6 |   F7 |   F8 |   F9 |  F10 | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+  * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+  * | Ctrl |  F11 |  F12 | EISU |||||||| Lower| Space|Delete|||||||| Bksp | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
+  * ,----------------------------------------------------------------------------------------------------------------------.
+  */
+  [_RAISE] = LAYOUT(
+    KC_GRV , KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
+    KC_TILD, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT, KC_COLN, KC_DQT , \
+    KC_LSFT, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_F11 , KC_F12,  EISU,             LOWER,   KC_SPC , KC_DEL,        KC_BSPC,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+    ),
+
+  /* Adjust
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * |      | Reset|RGB ON|  MODE|  HUE-|  HUE+|      |                    |      |  SAT-|  SAT+|  VAL-|  VAL+|      |      |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * |      |      |      |      ||||||||      |      |      ||||||||      |      |      ||||||||      |      |      |      |
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   */
+  [_ADJUST] = LAYOUT(
+    _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI,_______,                       _______, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
+    _______, _______, BL_TOGG, BL_BRTG, BL_INC , BL_DEC ,_______,                       _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______,_______,                       _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______,          _______,_______,_______,       _______,_______, _______,          _______, _______, _______, _______  \
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
--- a/keyboards/ergodash/mini/keymaps/default/rules.mk
+++ b/keyboards/ergodash/mini/keymaps/default/rules.mk
--- a/keyboards/ergodash/mini/mini.c
+++ b/keyboards/ergodash/mini/mini.c
@@ -0,0 +1,13 @@
+#include "ergodash.h"
+
+#ifdef AUDIO_ENABLE
+    float tone_startup[][2] = SONG(STARTUP_SOUND);
+    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    led_set_user(usb_led);
+}
+#endif
--- a/keyboards/ergodash/mini/mini.h
+++ b/keyboards/ergodash/mini/mini.h
@@ -0,0 +1,60 @@
+#ifndef MINI_H
+#define MINI_H
+
+#include "ergodash.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+	#include <avr/io.h>
+	#include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#ifndef FLIP_HALF
+// Standard Keymap
+// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
+#define LAYOUT( \
+	L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36  \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05, L06 }, \
+		{ L10, L11, L12, L13, L14, L15, L16 }, \
+		{ L20, L21, L22, L23, L24, L25, L26 }, \
+		{ L30, L31, L32, L33, L34, L35, L36 }, \
+		{ R06, R05, R04, R03, R02, R01, R00 }, \
+		{ R16, R15, R14, R13, R12, R11, R10 }, \
+		{ R26, R25, R24, R23, R22, R21, R20 }, \
+		{ R36, R35, R34, R33, R32, R31, R30 }, \
+	}
+#else
+// Keymap with right side flipped
+// (TRRS jack on both halves are to the right)
+#define LAYOUT( \
+	L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36  \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05, L06 }, \
+		{ L10, L11, L12, L13, L14, L15, L16 }, \
+		{ L20, L21, L22, L23, L24, L25, L26 }, \
+		{ L30, L31, L32, L33, L34, L35, L36 }, \
+		{ R00, R01, R02, R03, R04, R05, R06 }, \
+		{ R10, R11, R12, R13, R14, R15, R16 }, \
+		{ R20, R21, R22, R23, R24, R25, R26 }, \
+		{ R30, R31, R32, R33, R34, R35, R36 }, \
+	}
+#endif
+
+#endif
--- a/keyboards/ergodash/mini/readme.md
+++ b/keyboards/ergodash/mini/readme.md
@@ -0,0 +1,18 @@
+# ErgoDash mini
+
+![ErgoDash mini](https://github.com/omkbd/picture/blob/master/Ergodashmini.jpg)
+
+Keyboard Maintainer: [omkbd](https://github.com/omkbd) [@omkbd](https://twitter.com/omkbd)  
+Hardware Supported: ErgoDash mini PCB, Pro Micro ATmega32u4  
+Hardware Availability: Order your own [yourself](https://github.com/omkbd/ErgoDash)
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ergodash/mini:default
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+
+# Layout
+![layout](https://github.com/omkbd/picture/blob/master/ergodashmini-layout.png)
+![PCB](https://github.com/omkbd/picture/blob/master/Ergodashmini_PCB.jpg)
--- a/keyboards/ergodash/mini/rules.mk
+++ b/keyboards/ergodash/mini/rules.mk
@@ -0,0 +1,2 @@
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no
--- a/keyboards/ergodash/readme.md
+++ b/keyboards/ergodash/readme.md
@@ -1,6 +1,6 @@
 # ErgoDash

-![ErgoDash](https://github.com/omkbd/picture/blob/master/IMG_20180630_1702141.jpg)
+![ErgoDash](https://github.com/omkbd/picture/blob/master/Ergodash.jpg)

 Keyboard Maintainer: [omkbd](https://github.com/omkbd) [@omkbd](https://twitter.com/omkbd)  
 Hardware Supported: ErgoDash PCB, Pro Micro ATmega32u4  
@@ -15,4 +15,4 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)

 # Layout
 ![layout](https://github.com/omkbd/picture/blob/master/ergodash-layout.png)
-![PCB](https://github.com/omkbd/picture/blob/master/IMG_20180630_2022231.jpg)
+![PCB](https://github.com/omkbd/picture/blob/master/Ergodash_PCB.jpg)
--- a/keyboards/ergodash/rev2/config.h
+++ b/keyboards/ergodash/rev2/config.h
@@ -45,6 +45,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST

+#define C6_AUDIO
+
 /* number of backlight levels */
 #ifdef BACKLIGHT_ENABLE
  #define BACKLIGHT_PIN B6
--- a/keyboards/ergodash/rev2/keymaps/default/keymap.c
+++ b/keyboards/ergodash/rev2/keymaps/default/keymap.c
@@ -19,29 +19,29 @@ enum custom_keycodes {
 // Fillers to make layering more clear
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
-#define KC_JPN LALT(KC_GRV)
+#define EISU LALT(KC_GRV)

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

  /* Qwerty
   * ,----------------------------------------------------------------------------------------------------------------------.
-   * | ESC  |   1  |   2  |   3  |   4  |   5  |   [  |                    |   ]  |   6  |   7  |   8  |   9  |   0  | Caps |
+   * | ESC  |   1  |   2  |   3  |   4  |   5  |   [  |                    |   ]  |   6  |   7  |   8  |   9  |   0  |Pscree|
   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
   * |  `   |   Q  |   W  |   E  |   R  |   T  |   -  |                    |   =  |   Y  |   U  |   I  |   O  |   P  |  \   |
   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
   * | Tab  |   A  |   S  |   D  |   F  |   G  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   ;  |  "   |
   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * | Shift|   Z  |   X  |   C  |   V  |   B  |  JPN |                    | Enter|   N  |   M  |   ,  |   .  |   /  | Shift|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  | Space|                    | Enter|   N  |   M  |   ,  |   .  |   /  | Shift|
   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * | Ctrl |  GUI |  ALt |Adjust|||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Left | Down |  Up  | Right|
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Left | Down |  Up  | Right|
   * ,----------------------------------------------------------------------------------------------------------------------.
   */
  [_QWERTY] = LAYOUT( \
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LBRC,                        KC_RBRC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_CAPS, \
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LBRC,                        KC_RBRC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_PSCR, \
    KC_GRV,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_MINS,                        KC_EQL , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS, \
    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_JPN ,                        KC_ENT , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC ,_______,        _______,KC_ENT , RAISE,            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,_______,        _______,KC_ENT , RAISE,            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
  ),

  /* Lower
@@ -52,17 +52,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * | Shift|   6  |   7  |   8  |   9  |   0  |  JPN |                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * | Ctrl |  GUI |  ALt |Adjust|||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
   * ,----------------------------------------------------------------------------------------------------------------------.
   */
  [_LOWER] = LAYOUT(
    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
-    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_JPN ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC ,_______,        _______,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,_______,        _______,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
  ),

  /* Raise
@@ -73,17 +73,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * | Shift|   6  |   7  |   8  |   9  |   0  |  JPN |                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * | Ctrl |  GUI |  ALt |Adjust|||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
   * ,----------------------------------------------------------------------------------------------------------------------.
   */
  [_RAISE] = LAYOUT(
    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
-    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_JPN ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC ,_______,        _______,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,_______,        _______,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
  ),

  /* Adjust
--- a/keyboards/ergodash/rev2/rules.mk
+++ b/keyboards/ergodash/rev2/rules.mk
@@ -1 +1,2 @@
-BACKLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no
--- a/keyboards/ergodash/rules.mk
+++ b/keyboards/ergodash/rules.mk
@@ -64,7 +64,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 SUBPROJECT_rev1 = yes
 USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
--- a/keyboards/ergodone/config.h
+++ b/keyboards/ergodone/config.h
@@ -53,8 +53,6 @@
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    5

-#define PREVENT_STUCK_MODIFIERS
-
 #define USB_MAX_POWER_CONSUMPTION 500

 /* NKRO */
--- a/keyboards/ergodox_ez/config.h
+++ b/keyboards/ergodox_ez/config.h
@@ -97,8 +97,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #define DEBOUNCE    15

-#define PREVENT_STUCK_MODIFIERS
-
 #define USB_MAX_POWER_CONSUMPTION 500

 // RGB backlight
--- a/keyboards/ergodox_ez/keymaps/heartrobotninja/rules.mk
+++ b/keyboards/ergodox_ez/keymaps/heartrobotninja/rules.mk
@@ -13,6 +13,7 @@ AUTOLOG_ENABLE = no
 RGBLIGHT_ENABLE = yes
 RGBLIGHT_ANIMATION = yes
 EXTRAKEY_ENABLE = yes
+LEADER_ENABLE = yes

 OPT_DEFS += -DUSER_PRINT

@@ -31,4 +32,4 @@ OPT_DEFS += -DKEYMAP_VERSION=\"$(KEYMAP_VERSION)\\\#$(KEYMAP_BRANCH)\"

 ifndef QUANTUM_DIR
 	include ../../../../Makefile
-endif
+endif
--- a/keyboards/ergodox_ez/keymaps/vim/vim.h
+++ b/keyboards/ergodox_ez/keymaps/vim/vim.h
@@ -9,7 +9,6 @@

 #define PRESS(keycode) register_code16(keycode)
 #define RELEASE(keycode) unregister_code16(keycode)
-#define PREVENT_STUCK_MODIFIERS

 uint16_t VIM_QUEUE = KC_NO;

--- a/keyboards/ergodox_infinity/keymaps/gordon/config.h
+++ b/keyboards/ergodox_infinity/keymaps/gordon/config.h
@@ -15,8 +15,6 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

-#define PREVENT_STUCK_MODIFIERS
-
 #undef  IGNORE_MOD_TAP_INTERRUPT
 #define IGNORE_MOD_TAP_INTERRUPT

--- a/keyboards/ergodox_infinity/keymaps/narze/config.h
+++ b/keyboards/ergodox_infinity/keymaps/narze/config.h
@@ -13,7 +13,6 @@

 #define IGNORE_MOD_TAP_INTERRUPT
 #define PERMISSIVE_HOLD
-#define PREVENT_STUCK_MODIFIERS

 #undef MOUSEKEY_DELAY
 #define MOUSEKEY_DELAY 100
--- a/keyboards/ergodox_infinity/keymaps/not-quite-neo/rules.mk
+++ b/keyboards/ergodox_infinity/keymaps/not-quite-neo/rules.mk
@@ -1,2 +1,3 @@
 BACKLIGHT_ENABLE = yes
-UNICODE_ENABLE = yes
+UNICODE_ENABLE = yes
+LEADER_ENABLE = yes
--- a/keyboards/ergoinu/config.h
+++ b/keyboards/ergoinu/config.h
@@ -31,8 +31,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT         ergoinu
 #define DESCRIPTION     An (Not Portable But Small) Ergonomic split keyboard

-
-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100

--- a/keyboards/ergotravel/keymaps/ckofy/config.h
+++ b/keyboards/ergotravel/keymaps/ckofy/config.h
@@ -33,9 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #define TAPPING_TOGGLE 2

-// required if modifiers are defined in layers besided the default one.
-#define PREVENT_STUCK_MODIFIERS
-
 #undef RGBLED_NUM
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 12
--- a/keyboards/felix/config.h
+++ b/keyboards/felix/config.h
@@ -42,8 +42,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS

 /* there is no rgb underglow by default. */
 #define RGB_DI_PIN
@@ -53,4 +51,4 @@
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8

-#endif
+#endif
--- a/keyboards/four_banger/config.h
+++ b/keyboards/four_banger/config.h
@@ -43,9 +43,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E6
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -55,4 +52,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif

-#endif
+#endif
--- a/keyboards/fourier/keymaps/jennetters/config.h
+++ b/keyboards/fourier/keymaps/jennetters/config.h
@@ -22,10 +22,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #define TAPPING_TERM 100

-/* Try to prevent sticky keys */
-#define PREVENT_STUCK_MODIFIERS
-
 /* Use I2C or Serial, not both */

 #define USE_SERIAL
-// #define USE_I2C
+// #define USE_I2C
--- a/keyboards/fractal/config.h
+++ b/keyboards/fractal/config.h
@@ -43,10 +43,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0
--- a/keyboards/frosty_flake/keymaps/nikchi/rules.mk
+++ b/keyboards/frosty_flake/keymaps/nikchi/rules.mk
@@ -1,5 +1,5 @@
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -17,6 +17,7 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 TAP_DANCE_ENABLE = yes
+LEADER_ENABLE = yes

 ifndef QUANTUM_DIR
 	include ../../../../Makefile
--- a/keyboards/gh80_3000/config.h
+++ b/keyboards/gh80_3000/config.h
@@ -43,10 +43,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0
@@ -55,4 +51,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif

-#endif
+#endif
--- a/keyboards/gherkin/config.h
+++ b/keyboards/gherkin/config.h
@@ -43,10 +43,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0
@@ -55,4 +51,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif

-#endif
+#endif
--- a/keyboards/gherkin/keymaps/talljoe_gherkin/config.h
+++ b/keyboards/gherkin/keymaps/talljoe_gherkin/config.h
@@ -3,6 +3,4 @@

 #include "../../config.h"

-#define PREVENT_STUCK_MODIFIERS
-
-#endif
+#endif
--- a/keyboards/gonnerd/keymaps/gam3cat/config.h
+++ b/keyboards/gonnerd/keymaps/gam3cat/config.h
@@ -1,7 +1,6 @@
 #include "../../config.h"
 //GRAVE_ESC override for CTRL+SHIFT+ESC Windows task manager shortcut.
 #define GRAVE_ESC_CTRL_OVERRIDE
-#define PREVENT_STUCK_MODIFIERS

 //Delay matrix scan for tap dance, reduce to activate modifier keys faster.
 //#define TAPPING_TERM 200
--- a/keyboards/hadron/keymaps/default/config.h
+++ b/keyboards/hadron/keymaps/default/config.h
@@ -5,7 +5,6 @@

 #define LEADER_TIMEOUT 300
 //#define BACKLIGHT_BREATHING
-#define PREVENT_STUCK_MODIFIERS

 #define USE_I2C
 #define SSD1306OLED
--- a/keyboards/hadron/keymaps/side_numpad/config.h
+++ b/keyboards/hadron/keymaps/side_numpad/config.h
@@ -5,7 +5,6 @@

 #define LEADER_TIMEOUT 300
 //#define BACKLIGHT_BREATHING
-#define PREVENT_STUCK_MODIFIERS

 #define USE_I2C
 #define SSD1306OLED
--- a/keyboards/handwired/MS_sculpt_mobile/config.h
+++ b/keyboards/handwired/MS_sculpt_mobile/config.h
@@ -28,10 +28,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DESCRIPTION     6000

 /* key matrix size */
-#define MATRIX_ROWS 8 
-#define MATRIX_COLS 18 
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18

-#ifdef ASTAR 
+#ifdef ASTAR
 #define PRODUCT         sculpt mobile astar
                        /*0   1   2   3    4   5  6   7   8 */
 #define MATRIX_ROW_PINS {D7, C6, D4, D0, D1, D3, D2, E2}
@@ -95,6 +95,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION

-#define PREVENT_STUCK_MODIFIERS
-
 #endif
--- a/keyboards/handwired/atreus50/keymaps/ajp10304/config.h
+++ b/keyboards/handwired/atreus50/keymaps/ajp10304/config.h
@@ -3,8 +3,6 @@

 #include "../../config.h"

-#define PREVENT_STUCK_MODIFIERS
-
 #undef MATRIX_ROW_PINS
 #undef MATRIX_COL_PINS

--- a/keyboards/handwired/dactyl/config.h
+++ b/keyboards/handwired/dactyl/config.h
@@ -63,8 +63,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    15

-#define PREVENT_STUCK_MODIFIERS
-
 #define USB_MAX_POWER_CONSUMPTION 500

 #endif
--- a/keyboards/handwired/kbod/config.h
+++ b/keyboards/handwired/kbod/config.h
@@ -48,7 +48,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
- 
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
@@ -159,8 +159,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION

-#define PREVENT_STUCK_MODIFIERS
-
 #undef TAPPING_TOGGLE
 #define TAPPING_TOGGLE 2

--- a/keyboards/handwired/promethium/keymaps/default/config.h
+++ b/keyboards/handwired/promethium/keymaps/default/config.h
@@ -11,8 +11,6 @@
 /* skip bootmagic and eeconfig */
 #define BOOTMAGIC_KEY_SKIP              KC_SPACE

-#define PREVENT_STUCK_MODIFIERS
-
 #define RGBSPS_ENABLE
 #define RGBSPS_DEMO_ENABLE

--- a/keyboards/handwired/promethium/keymaps/priyadi/config.h
+++ b/keyboards/handwired/promethium/keymaps/priyadi/config.h
@@ -11,8 +11,6 @@
 /* skip bootmagic and eeconfig */
 #define BOOTMAGIC_KEY_SKIP              KC_SPACE

-#define PREVENT_STUCK_MODIFIERS
-
 #define RGBSPS_ENABLE
 #define RGBSPS_DEMO_ENABLE

--- a/keyboards/handwired/space_oddity/config.h
+++ b/keyboards/handwired/space_oddity/config.h
@@ -49,10 +49,6 @@
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )

-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0
--- a/keyboards/helix/pico/config.h
+++ b/keyboards/helix/pico/config.h
@@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DESCRIPTION     A split keyboard for the cheap makers


-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100

--- a/keyboards/helix/rev1/keymaps/OLED_sample/config.h
+++ b/keyboards/helix/rev1/keymaps/OLED_sample/config.h
@@ -35,7 +35,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #define SSD1306OLED

-#define PREVENT_STUCK_MODIFIERS
+#define USE_SERIAL_PD2
+
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100

--- a/keyboards/helix/rev2/config.h
+++ b/keyboards/helix/rev2/config.h
@@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DESCRIPTION     A split keyboard for the cheap makers


-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100

--- a/keyboards/hhkb/keymaps/blakedietz/rules.mk
+++ b/keyboards/hhkb/keymaps/blakedietz/rules.mk
@@ -1,2 +1,3 @@
 TAP_DANCE_ENABLE = no
 UNICODE_ENABLE   = no
+LEADER_ENABLE = yes
--- a/keyboards/infinity60/config.h
+++ b/keyboards/infinity60/config.h
@@ -18,8 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_H
 #define CONFIG_H

-#define PREVENT_STUCK_MODIFIERS
-
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0x1c11
 #define PRODUCT_ID      0xb04d
--- a/keyboards/iris/keymaps/davidrambo/config.h
+++ b/keyboards/iris/keymaps/davidrambo/config.h
@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 /* Select hand configuration */
 #define PERMISSIVE_HOLD
-#define PREVENT_STUCK_MODIFIERS
 #define MASTER_LEFT
 // #define MASTER_RIGHT
 // #define EE_HANDS
--- a/keyboards/iris/keymaps/jennetters/config.h
+++ b/keyboards/iris/keymaps/jennetters/config.h
@@ -19,9 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #define TAPPING_TERM 150

-/* Try to prevent sticky keys */
-#define PREVENT_STUCK_MODIFIERS
-
 /* Use I2C or Serial, not both */

 #define USE_SERIAL
@@ -38,4 +35,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 12
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_VAL_STEP 8
--- a/keyboards/iris/keymaps/krusli/config.h
+++ b/keyboards/iris/keymaps/krusli/config.h
@@ -20,8 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #include "config_common.h"

-// #define PREVENT_STUCK_MODIFIERS
-
 /* Use I2C or Serial, not both */

 #define USE_SERIAL
--- a/keyboards/iris/keymaps/xyverz/config.h
+++ b/keyboards/iris/keymaps/xyverz/config.h
@@ -23,8 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define USE_SERIAL
 #define EE_HANDS

-#define PREVENT_STUCK_MODIFIERS
-
 #undef PRODUCT
 #define PRODUCT Iris Keyboard

--- a/keyboards/jc65/v32u4/keymaps/gam3cat/config.h
+++ b/keyboards/jc65/v32u4/keymaps/gam3cat/config.h
@@ -1,7 +1,6 @@
 #include "../../config.h"
 //GRAVE_ESC override for CTRL+SHIFT+ESC Windows task manager shortcut.
 #define GRAVE_ESC_CTRL_OVERRIDE
-#define PREVENT_STUCK_MODIFIERS

 //Delay matrix scan for tap dance, reduce to activate modifier keys faster.
 //#define TAPPING_TERM 200
--- a/keyboards/jj40/keymaps/ajp10304/config.h
+++ b/keyboards/jj40/keymaps/ajp10304/config.h
@@ -1,8 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#define PREVENT_STUCK_MODIFIERS
-
-#endif
--- a/keyboards/jj40/keymaps/fun40/config.h
+++ b/keyboards/jj40/keymaps/fun40/config.h
@@ -4,6 +4,5 @@
 #include "../../config.h"

 #define FORCE_NKRO
-#define PREVENT_STUCK_MODIFIERS

 #endif
--- a/keyboards/jj40/keymaps/krusli/config.h
+++ b/keyboards/jj40/keymaps/krusli/config.h
@@ -3,7 +3,6 @@

 #include "../../config.h"

-#define PREVENT_STUCK_MODIFIERS
 // #define TAPPING_TERM 300

 #endif
--- a/keyboards/jj40/keymaps/oscillope/config.h
+++ b/keyboards/jj40/keymaps/oscillope/config.h
@@ -3,7 +3,6 @@

 #include "../../config.h"

-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_TERM 200

 #endif
--- a/keyboards/jj40/keymaps/suzuken/config.h
+++ b/keyboards/jj40/keymaps/suzuken/config.h
@@ -3,7 +3,6 @@

 #include "../../config.h"

-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_TERM 300

 #endif
--- a/keyboards/jj40/keymaps/waples/config.h
+++ b/keyboards/jj40/keymaps/waples/config.h
@@ -3,7 +3,6 @@

 #include "../../config.h"

-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_TERM 300

 #endif
--- a/keyboards/jm60/config.h
+++ b/keyboards/jm60/config.h
@@ -18,8 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_H
 #define CONFIG_H

-#define PREVENT_STUCK_MODIFIERS
-
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6464
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Joe Wasson	743449472e	Make `PREVENT_STUCK_MODIFIERS` the default (#3107 ) * Remove chording as it is not documented, not used, and needs work. * Make Leader Key an optional feature. * Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE` * Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.	2018-09-17 13:48:02 -04:00
omkbd	b65e214375	Keyboard: add ergodash mini keyboard (#3901 ) * add ergodash mini add ergodash mini (4rows version) fix keymap and readme * fix replace include guard remove includes * fix audio	2018-09-15 10:57:46 -07:00
Olivier Poitrey	6bf2c07715	Keymap: dz60/macos_arrow: rev3 (#3909 ) * Arrow keys are now arranged on hjkl (vi style) * The escape key is moved on capslock, shared with func layer switch * The grave key is now dedicated (not shared with escape) * Add a new numpad layer that can be activated with the spacebar * Fix layout mismatch between layers * Use bult-in underscore KC_TRNS alias	2018-09-15 10:50:38 -07:00
Pascal Greilich	232ef75783	Keymap: A new alternative layout for planck (#3894 ) * a new planck layout * layout images * layout images 2 * typo * update include following PR comment * updates following PR commments 2 * updates following PR comments	2018-09-15 10:15:36 -07:00
Naoki Katahira	9712501bf3	Keyboard: Add Lily58 Keyboard (#3893 ) * add Lily58 * file fix	2018-09-15 10:14:39 -07:00
Graham P Heath	db35065e14	Keymap: Grahampheath: telophase fix and keymaps (#3888 ) * add my config * fix backlight, clean up that code * group background code, restore static var * qwerty is supposed to be in the middle * wrap layer change backlight in ifdef * backlight levels and some more 'emojis'. * Restructure to make it possible to press cmd ent on the right side of the board with one hand. * Expose the period through the number layer. Add Hyper keys to mouse layer * reduce mouse speed * add a : -P key * Thumbs up and down, remove some keys that are duplicated via function keys, clean up * fix build issues * add various emoji * duplicate default Meira keymaps * Miera updates * add documented but unmapped emoji * Sound for the Meira, was stumped by a file size! Thanks drashna! * add docs * docs * revert lib changes... * clean up * clean up * remove make file * Fixes missing key * clean up * add my lets split * add more emoji * add the telophase board (unofficially, I guess...) * add missing files * add/reset files * Review feedback implementation: Not needed. Add #define FLIP_HALF to your config.h file instead. * Review feedback implementation: All of these includes should be replaced with #include QMK_KEYBOARD_H. * Review feedback implementation: [FAILING] You may want to use LAYOUT_ortho_4x12 instead, and move this to /layouts/community/ortho_4x12/ instead. That way, you can use the same keymap for all of the boards. * clean up * add a key for command tilde (osx loves it) * at least its building again * remove adjusts and migrate layer switching to MO(_LAYER) * update the telophase readme * update the telophase readme * grahampheaths -> grahampheath * ONEHAND_ENABLE -> SWAP_HANDS_ENABLE * convert lets split to use ortho_4x12 * Move lets split keyboard layout into community/ortho_4x12 * make telophase use LAYOUT() * I did it?! * Add clap and grin * swap tabs and back and forward * whitespace * Add ellipsis and thanks emoji * Move flip_half to telophase config (conflicts with lets split layout) * Use #pragma once instead of config_user_h * remove unused stuff	2018-09-15 10:12:11 -07:00
James Laird-Wah	b1f11636c6	docs/contributing: add `#pragma once` to Coding Conventions This supersedes the older include guard mechanism since all the compilers now support it. It's easier for new users and less prone to error.	2018-09-15 09:37:06 -07:00