Create AG_TOGG code to toggle Alt/Gui swap.

LEADER_KEY needs to be set in config.h, not keymap.c. Credit goes to @randywallace for figuring this one out:

https://github.com/qmk/qmk_firmware/issues/2514#issuecomment-384847485

common_features.mk

@@ -221,7 +221,6 @@ ifeq ($(strip $(USB_HID_ENABLE)), yes)
     include $(TMK_DIR)/protocol/usb_hid.mk
 endif
 
-
 ifeq ($(strip $(HD44780_ENABLE)), yes)
     SRC += drivers/avr/hd44780.c
     OPT_DEFS += -DHD44780_ENABLE
@@ -232,11 +231,15 @@ ifeq ($(strip $(DYNAMIC_KEYMAP_ENABLE)), yes)
     SRC += $(QUANTUM_DIR)/dynamic_keymap.c
 endif
 
+ifeq ($(strip $(LEADER_ENABLE)), yes)
+  SRC += $(QUANTUM_DIR)/process_keycode/process_leader.c
+  OPT_DEFS += -DLEADER_ENABLE
+endif
+
 QUANTUM_SRC:= \
     $(QUANTUM_DIR)/quantum.c \
     $(QUANTUM_DIR)/keymap_common.c \
-    $(QUANTUM_DIR)/keycode_config.c \
-    $(QUANTUM_DIR)/process_keycode/process_leader.c
+    $(QUANTUM_DIR)/keycode_config.c
 
 ifndef CUSTOM_MATRIX
     ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
@@ -251,5 +254,5 @@ ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
     QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
                 $(QUANTUM_DIR)/split_common/split_util.c \
                 $(QUANTUM_DIR)/split_common/i2c.c \
-                $(QUANTUM_DIR)/split_common/serial.c  
+                $(QUANTUM_DIR)/split_common/serial.c
 endif

docs/config_options.md

@@ -119,8 +119,8 @@ If you define these options you will enable the associated feature, which may in
 
 * `#define FORCE_NKRO`
   * NKRO by default requires to be turned on, this forces it on during keyboard startup regardless of EEPROM setting. NKRO can still be turned off but will be turned on again if the keyboard reboots.
-* `#define PREVENT_STUCK_MODIFIERS`
-  * stores the layer a key press came from so the same layer is used when the key is released, regardless of which layers are enabled
+* `#define STRICT_LAYER_RELEASE`
+  * force a key release to be evaluated using the current layer stack instead of remembering which layer it came from (used for advanced cases)
 
 ## Behaviors That Can Be Configured
 

docs/contributing.md

@@ -70,6 +70,7 @@ Most of our style is pretty easy to pick up on, but right now it's not entirely
   * Do not write obvious comments
   * If you not sure if a comment is obvious, go ahead and include it.
 * In general we don't wrap lines, they can be as long as needed. If you do choose to wrap lines please do not wrap any wider than 76 columns.
+* We use `#pragma once` at the start of header files rather than old-style include guards (`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`)
 
 # General Guidelines
 

docs/feature_bootmagic.md

@@ -57,6 +57,7 @@ Hold down the Bootmagic key (Space by default) and the desired hotkey while plug
 |`MAGIC_UNNO_GUI`                  |         |Enable the GUI keys                       |
 |`MAGIC_SWAP_ALT_GUI`              |`AG_SWAP`|Swap Alt and GUI on both sides (for macOS)|
 |`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Left Alt and Left GUI              |
+|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Left Alt and GUI swap              |
 |`MAGIC_SWAP_BACKSLASH_BACKSPACE`  |         |Swap `\` and Backspace                    |
 |`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|         |Unswap `\` and Backspace                  |
 |`MAGIC_SWAP_CONTROL_CAPSLOCK`     |         |Swap Left Control and Caps Lock           |

docs/feature_leader_key.md

@@ -5,7 +5,7 @@ If you've ever used Vim, you know what a Leader key is. If not, you're about to
 That's what `KC_LEAD` does. Here's an example:
 
 1. Pick a key on your keyboard you want to use as the Leader key. Assign it the keycode `KC_LEAD`. This key would be dedicated just for this -- it's a single action key, can't be used for anything else.
-2. Include the line `#define LEADER_TIMEOUT 300` somewhere in your keymap.c file, probably near the top. The 300 there is 300ms -- that's how long you have for the sequence of keys following the leader. You can tweak this value for comfort, of course.
+2. Include the line `#define LEADER_TIMEOUT 300` in your config.h. The 300 there is 300ms -- that's how long you have for the sequence of keys following the leader. You can tweak this value for comfort, of course.
 3. Within your `matrix_scan_user` function, do something like this:
 
 ```
@@ -39,3 +39,11 @@ void matrix_scan_user(void) {
 As you can see, you have a few function. You can use `SEQ_ONE_KEY` for single-key sequences (Leader followed by just one key), and `SEQ_TWO_KEYS`, `SEQ_THREE_KEYS` up to `SEQ_FIVE_KEYS` for longer sequences.
 
 Each of these accepts one or more keycodes as arguments. This is an important point: You can use keycodes from **any layer on your keyboard**. That layer would need to be active for the leader macro to fire, obviously.
+
+## Adding Leader Key Support in the `rules.mk`
+
+To add support for Leader Key you simply need to add a single line to your keymap's `rules.mk`:
+
+```
+LEADER_ENABLE = yes
+```

docs/keycodes.md

@@ -271,6 +271,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|         |Unswap `\` and Backspace            |
 |`MAGIC_UNHOST_NKRO`               |         |Force NKRO off                      |
 |`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Alt and GUI on both sides    |
+|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Alt and GUI swap on both sides|
 |`MAGIC_TOGGLE_NKRO`               |         |Turn NKRO on or off                 |
 
 ## [Bluetooth](feature_bluetooth.md)

docs/understanding_qmk.md

@@ -129,6 +129,7 @@ Comparing against our keymap we can see that the pressed key is KC_NLCK. From he
 <!-- FIXME: Magic happens between here and process_record -->
 
 ##### Process Record
+
 The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions.  Depending on options set in rule.mk or elsewhere, only a subset of the functions below will be included in final firmware.
 
 * [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/tmk_core/common/action.c#L172)
@@ -146,7 +147,6 @@ The `process_record()` function itself is deceptively simple, but hidden within
     * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_music.c#L114)
     * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_tap_dance.c#L136)
     * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_leader.c#L38)
-    * [`bool process_chording(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_chording.c#L41)
     * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_combo.c#L115)
     * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicode.c#L22)
     * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_ucis.c#L91)

drivers/arm/i2c_master.c

@@ -43,11 +43,7 @@ static const I2CConfig i2cconfig = {
 
 void i2c_init(void)
 {
-  //palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); // Try releasing special pins for a short time
-
-  palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
-  palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
-
+  palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); // Try releasing special pins for a short time
   chThdSleepMilliseconds(10);
 
   palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);

drivers/arm/i2c_master.h

@@ -24,7 +24,7 @@
  */
 
 #include "ch.h"
-#include "hal.h"
+#include <hal.h>
 
 #ifndef I2C_DRIVER
   #define I2C_DRIVER I2CD1

drivers/issi/is31fl3733.c

@@ -77,7 +77,7 @@ uint8_t g_twi_transfer_buffer[20];
 uint8_t g_pwm_buffer[DRIVER_COUNT][192];
 bool g_pwm_buffer_update_required = false;
 
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 } };
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
 bool g_led_control_registers_update_required = false;
 
 void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data )
@@ -159,7 +159,7 @@ void IS31FL3733_init( uint8_t addr )
     // Select PG3
     IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
     // Set global current to maximum.
-    IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0x03 );
+    IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
     // Disable software shutdown.
     IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
 

drivers/issi/is31fl3733.h

@@ -48,166 +48,6 @@ void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, b
 void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
 void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 
-#ifdef IS31FL3737
-
-#define A_1   0x00
-#define A_2   0x01
-#define A_3   0x02
-#define A_4   0x03
-#define A_5   0x04
-#define A_6   0x05
-#define A_7   0x08
-#define A_8   0x09
-#define A_9   0x0A
-#define A_10  0x0B
-#define A_11  0x0C
-#define A_12  0x0D
-
-#define B_1   0x10
-#define B_2   0x11
-#define B_3   0x12
-#define B_4   0x13
-#define B_5   0x14
-#define B_6   0x15
-#define B_7   0x18
-#define B_8   0x19
-#define B_9   0x1A
-#define B_10  0x1B
-#define B_11  0x1C
-#define B_12  0x1D
-
-#define C_1   0x20
-#define C_2   0x21
-#define C_3   0x22
-#define C_4   0x23
-#define C_5   0x24
-#define C_6   0x25
-#define C_7   0x28
-#define C_8   0x29
-#define C_9   0x2A
-#define C_10  0x2B
-#define C_11  0x2C
-#define C_12  0x2D
-
-#define D_1   0x30
-#define D_2   0x31
-#define D_3   0x32
-#define D_4   0x33
-#define D_5   0x34
-#define D_6   0x35
-#define D_7   0x38
-#define D_8   0x39
-#define D_9   0x3A
-#define D_10  0x3B
-#define D_11  0x3C
-#define D_12  0x3D
-
-#define E_1   0x40
-#define E_2   0x41
-#define E_3   0x42
-#define E_4   0x43
-#define E_5   0x44
-#define E_6   0x45
-#define E_7   0x48
-#define E_8   0x49
-#define E_9   0x4A
-#define E_10  0x4B
-#define E_11  0x4C
-#define E_12  0x4D
-
-#define F_1   0x50
-#define F_2   0x51
-#define F_3   0x52
-#define F_4   0x53
-#define F_5   0x54
-#define F_6   0x55
-#define F_7   0x58
-#define F_8   0x59
-#define F_9   0x5A
-#define F_10  0x5B
-#define F_11  0x5C
-#define F_12  0x5D
-
-#define G_1   0x60
-#define G_2   0x61
-#define G_3   0x62
-#define G_4   0x63
-#define G_5   0x64
-#define G_6   0x65
-#define G_7   0x68
-#define G_8   0x69
-#define G_9   0x6A
-#define G_10  0x6B
-#define G_11  0x6C
-#define G_12  0x6D
-
-#define H_1   0x70
-#define H_2   0x71
-#define H_3   0x72
-#define H_4   0x73
-#define H_5   0x74
-#define H_6   0x75
-#define H_7   0x78
-#define H_8   0x79
-#define H_9   0x7A
-#define H_10  0x7B
-#define H_11  0x7C
-#define H_12  0x7D
-
-#define I_1   0x80
-#define I_2   0x81
-#define I_3   0x82
-#define I_4   0x83
-#define I_5   0x84
-#define I_6   0x85
-#define I_7   0x88
-#define I_8   0x89
-#define I_9   0x8A
-#define I_10  0x8B
-#define I_11  0x8C
-#define I_12  0x8D
-
-#define J_1   0x90
-#define J_2   0x91
-#define J_3   0x92
-#define J_4   0x93
-#define J_5   0x94
-#define J_6   0x95
-#define J_7   0x98
-#define J_8   0x99
-#define J_9   0x9A
-#define J_10  0x9B
-#define J_11  0x9C
-#define J_12  0x9D
-
-#define K_1   0xA0
-#define K_2   0xA1
-#define K_3   0xA2
-#define K_4   0xA3
-#define K_5   0xA4
-#define K_6   0xA5
-#define K_7   0xA8
-#define K_8   0xA9
-#define K_9   0xAA
-#define K_10  0xAB
-#define K_11  0xAC
-#define K_12  0xAD
-
-#define L_1   0xB0
-#define L_2   0xB1
-#define L_3   0xB2
-#define L_4   0xB3
-#define L_5   0xB4
-#define L_6   0xB5
-#define L_7   0xB8
-#define L_8   0xB9
-#define L_9   0xBA
-#define L_10  0xBB
-#define L_11  0xBC
-#define L_12  0xBD
-
-#else
-
 #define A_1  0x00
 #define A_2  0x01
 #define A_3  0x02
@@ -412,6 +252,4 @@ void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 #define L_15  0xBE
 #define L_16  0xBF
 
-#endif
-
 #endif // IS31FL3733_DRIVER_H

keyboards/1upkeyboards/1up60rgb/config.h

@@ -43,9 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS

keyboards/1upkeyboards/sweet16/config.h

@@ -9,7 +9,7 @@
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    1up Keyboards
 #define PRODUCT         Sweet16
-#define DESCRIPTION     4x4 grid 
+#define DESCRIPTION     4x4 grid
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -43,9 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN B1
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -55,4 +52,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 
-#endif
+#endif

keyboards/acr60/config.h

@@ -41,9 +41,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 20

keyboards/alf/x2/config.h

@@ -43,9 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -55,4 +52,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 
-#endif
+#endif

keyboards/alpha/config.h

@@ -43,8 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
 
 #define RGB_DI_PIN F4
 #ifdef RGB_DI_PIN

keyboards/alu84/config.h

@@ -59,9 +59,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLED_NUM 16

keyboards/at101_blackheart/config.h

@@ -38,6 +38,3 @@
 #define IS_COMMAND() ( \
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
-
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS

keyboards/atreus/keymaps/jeremy/keymap.c

@@ -4,8 +4,6 @@
 #include "action_layer.h"
 #include "keymap_colemak.h"
 
-#define PREVENT_STUCK_MODIFIERS
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 #define ALPH 0
 #define NUMS 1

keyboards/atreus/keymaps/khitsule/config.h

@@ -3,8 +3,6 @@
 
 #include "../../config.h"
 
-#define PREVENT_STUCK_MODIFIERS
-
 #define IGNORE_MOD_TAP_INTERRUPT
 
-#endif
+#endif

keyboards/atreus/keymaps/xk/config.h

@@ -30,8 +30,7 @@ the Free Software Foundation, either version 2 of the License, or
 #define MOUSEKEY_WHEEL_MAX_SPEED   8
 #define MOUSEKEY_WHEEL_TIME_TO_MAX 40
 
-#define PREVENT_STUCK_MODIFIERS
 #define IGNORE_MOD_TAP_INTERRUPT
 #define PERMISSIVE_HOLD
 
-#endif
+#endif

keyboards/atreus62/keymaps/mneme/config.h

@@ -1,6 +1,5 @@
 #define ONESHOT_TIMEOUT 3000
 #define TAPPING_TERM 200
-#define PREVENT_STUCK_MODIFIERS
 #define FORCE_NKRO
 #define LEADER_TIMEOUT 1000
 

keyboards/atreus62/keymaps/mneme/rules.mk

@@ -3,3 +3,4 @@ NKRO_ENABLE = true
 MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = no
+LEADER_ENABLE = yes

keyboards/bfo9000/keymaps/andylikescandy6x18/config.h

@@ -37,7 +37,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
  #define PERMISSIVE_HOLD
 
- #define PREVENT_STUCK_MODIFIERS
-
-
 #endif

keyboards/bigseries/1key/config.h

@@ -47,9 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS

keyboards/bigseries/2key/config.h

@@ -47,9 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS

keyboards/bigseries/3key/config.h

@@ -47,9 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS

keyboards/bigseries/4key/config.h

@@ -47,9 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS

keyboards/bigswitch/bigswitch.c

@@ -19,10 +19,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 volatile uint8_t runonce = true;
 static uint16_t my_timer;
 
+__attribute__ ((weak))
 void matrix_init_user(void) {
   my_timer = timer_read();
 }
 
+__attribute__ ((weak))
 void matrix_scan_user(void) {
   if (runonce && timer_elapsed(my_timer) > 1000) {
     runonce = false;

keyboards/bigswitch/config.h

@@ -47,8 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
 
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3

keyboards/bigswitch/keymaps/wanleg/config.h

@@ -0,0 +1,45 @@
+/* Copyright 2018 wanleg
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
+#undef MATRIX_ROW_PINS
+#define MATRIX_ROW_PINS { B4 }
+#undef MATRIX_COL_PINS
+#define MATRIX_COL_PINS { B6 }
+//#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#undef DIODE_DIRECTION
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+#define BREATHING_PERIOD 5
+
+/* for Tap Dance */
+#undef TAPPING_TERM
+#define TAPPING_TERM 700
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+//#define DEBOUNCING_DELAY 5
+#undef DEBOUNCING_DELAY
+#define DEBOUNCING_DELAY 2
+
+// set flashing LED with QMK DFU
+#define QMK_LED B0

keyboards/bigswitch/keymaps/wanleg/keymap.c

@@ -1,4 +1,4 @@
-/* Copyright 2016 Jack Humbert
+/* Copyright 2018 wanleg
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,20 +13,15 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+#include QMK_KEYBOARD_H
+#include "wanleg.h"
 
-#ifndef PROCESS_CHORDING_H
-#define PROCESS_CHORDING_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( /* Base */
+TD(CAD_TD) \
+),
+};
 
-#include "quantum.h"
+void led_set_user(uint8_t usb_led) {
 
-// Chording stuff
-#define CHORDING_MAX 4
-bool chording = false;
-
-uint8_t chord_keys[CHORDING_MAX] = {0};
-uint8_t chord_key_count = 0;
-uint8_t chord_key_down = 0;
-
-bool process_chording(uint16_t keycode, keyrecord_t *record);
-
-#endif
+}

keyboards/bigswitch/keymaps/wanleg/rules.mk

@@ -0,0 +1,7 @@
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+
+#If using a ProMicro and it has the QMK DFU bootloader instead of Caterina,
+#run "make <keyboard>:<keymap> dfu=qmk" when compiling to ensure it is flagged properly after being flashed
+ifeq ($(strip $(dfu)), qmk)
+    BOOTLOADER = qmk-dfu
+endif

keyboards/catch22/config.h

@@ -46,9 +46,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN F6
 #define RGBLIGHT_ANIMATIONS

keyboards/chimera_ergo/config.h

@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *  These options are also useful to firmware size reduction.
  */
 
-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG
 

keyboards/chimera_ls/config.h

@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *  These options are also useful to firmware size reduction.
  */
 
-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG
 

keyboards/chimera_ortho/config.h

@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *  These options are also useful to firmware size reduction.
  */
 
-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG
 

keyboards/chocopad/config.h

@@ -40,10 +40,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 8
@@ -56,4 +52,4 @@
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 
-#endif
+#endif

keyboards/clueboard/60/config.h

@@ -49,9 +49,6 @@
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 6
 
-/* Prevent modifiers from being stuck on after layer changes. */
-#define PREVENT_STUCK_MODIFIERS
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 //#define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/clueboard/66/keymaps/bloodlvst/config.h

@@ -3,6 +3,5 @@
 
 #include "../../config.h"
 
-#define PREVENT_STUCK_MODIFIERS
 #define DISABLE_SPACE_CADET_ROLLOVER
 #endif

keyboards/comet46/config.h

@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *  These options are also useful to firmware size reduction.
  */
 
-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG
 

keyboards/contra/config.h

@@ -43,10 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0

keyboards/contra/keymaps/ryanm101/config.h

@@ -3,7 +3,6 @@
 
 #include "config_common.h"
 
-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_TERM 200
 
 #ifdef AUDIO_ENABLE
@@ -28,7 +27,7 @@
 /* enable basic MIDI features:
    - MIDI notes can be sent when in Music mode is on
 */
-                                
+
 #define MIDI_BASIC
 
 /* enable advanced MIDI features:
@@ -42,4 +41,4 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 2
 
-#endif
+#endif

keyboards/crawlpad/config.h

@@ -40,9 +40,6 @@
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS

keyboards/crkbd/keymaps/default/config.h

@@ -36,7 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define USE_SERIAL_PD2
 
-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100
 

keyboards/dichotemy/config.h

@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *  These options are also useful to firmware size reduction.
  */
 
-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG
 

keyboards/dilly/config.h

@@ -43,10 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 8
@@ -59,4 +55,4 @@
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 
-#endif
+#endif

keyboards/dz60/config.h

@@ -41,9 +41,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 16

keyboards/dz60/keymaps/LEdiodes/config.h

@@ -41,9 +41,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 16

keyboards/dz60/keymaps/macos_arrow/keymap.c

@@ -1,9 +1,9 @@
 #include QMK_KEYBOARD_H
 
-#define ______ KC_TRNS
-#define _BL 0
-#define _FL 1
-#define _ML 2
+#define _BL 0 // Base layer
+#define _FL 1 // Function layer
+#define _ML 2 // Media layer
+#define _NL 2 // Numpad layer
 
 enum my_keycodes {
   BR_UP = SAFE_RANGE,
@@ -12,45 +12,45 @@ enum my_keycodes {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* ,-----------------------------------------------------------------------------------------.
-   * | Esc | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -   | =   | Backspace |
+   * |  `  | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -   | =   | Backspace |
    * |-----------------------------------------------------------------------------------------+
    * | Tab    | Q   | W   | E   | R   | T   | Y   | U   | I   | O   | P   | [   | ]   |   \    |
    * |-----------------------------------------------------------------------------------------+
-   * | _FL      | A   | S   | D   | F   | G   | H   | J   | K   | L   | ;   | '   | Enter      |
+   * | Esc/_FL  | A   | S   | D   | F   | G   | H   | J   | K   | L   | ;   | '   | Enter      |
    * |-----------------------------------------------------------------------------------------+
-   * | Shift     | Z   | X   | C   | V   | B   | N   | M   | ,   | .   | /   | _ML | Up  |Shift|
+   * | Shift     | Z   | X   | C   | V   | B   | N   | M   | ,   | .   | /   |     | Up  |Shift|
    * |-----------------------------------------------------------------------------------------+
-   * | Ctrl | Alt  | Gui  |                Space               |Gui/_ML| Alt | Left| Down|Right|
+   * | Ctrl | Alt  | Gui  |             Space / _NL            |Gui/_ML| Alt | Left| Down|Right|
    * `-----------------------------------------------------------------------------------------'
    */
   [_BL] = LAYOUT_2_shifts(
-    KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
+    KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
     KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
-    MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
-    KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_ML), KC_UP, KC_RSFT,
-    KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, LM(_ML, MOD_RGUI), KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),
+    LT(_FL, KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+    KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_A, KC_UP, KC_RSFT,
+    KC_LCTL, KC_LALT, KC_LGUI, KC_NO, LT(_NL, KC_SPC), KC_NO, LM(_ML, MOD_RGUI), KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT),
 
   /* ,-----------------------------------------------------------------------------------------.
-   * |  `  | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |    Del    |
+   * |     | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |    Del    |
    * |-----------------------------------------------------------------------------------------+
-   * |        |     |     |     |     |     |     |     | UP  |     |     |     |     |        |
+   * |        |     |     |     |     |     |     |PgUp |     |     |     |     |     |        |
    * |-----------------------------------------------------------------------------------------+
-   * |          |     |     |     |     |     |     | Left| Down|Right|     |     |            |
+   * |          |     |     |     |     |     | Left| Down|  Up |Right|     |     |            |
    * |-----------------------------------------------------------------------------------------+
-   * |           |     |     |     |     |     |     |     |     |     |     |     |     |     |
+   * |           |     |     |     |     |     |     |PgDwn|     |     |     |     |     |     |
    * |-----------------------------------------------------------------------------------------+
    * |      |      |      |                                      |     |     |     |     |     |
    * `-----------------------------------------------------------------------------------------'
    */
-  [_FL] = LAYOUT(
-    KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ______, KC_DEL,
-    ______, ______, ______, ______, ______, ______, ______, ______, KC_UP, ______, ______, ______, ______, ______,
-    ______, ______, ______, ______, ______, ______, ______, KC_LEFT, KC_DOWN, KC_RIGHT, ______, ______, ______,
-    ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,
-    ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______),
+  [_FL] = LAYOUT_2_shifts(
+    _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL,
+    _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______, _______,
+    _______, KC_NO,  _______, _______, _______, _______, _______, _______, KC_PGDN, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
 
   /* ,-----------------------------------------------------------------------------------------.
-   * |Eject| BR- | BR+ | F3  | F4  |     |     |PREV |PLAY |NEXT |MUTE | V- | V+ |             |
+   * |Eject| BR- | BR+ |     |     |     |     |PREV |PLAY |NEXT |MUTE | V- | V+ |             |
    * |-----------------------------------------------------------------------------------------+
    * |        |     |     |     |     |     |     |     |     |     |     |     |     |  Reset |
    * |-----------------------------------------------------------------------------------------+
@@ -61,12 +61,31 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |      |      |      |                                      |     |     |     |     |     |
    * `-----------------------------------------------------------------------------------------'
    */
-  [_ML] = LAYOUT(
-    KC_MEDIA_EJECT, BR_DOWN, BR_UP, ______, ______, KC_F5, KC_F6, KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, ______, ______,
-    ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, RESET,
-    ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,
-    ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,
-    ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______),
+  [_ML] = LAYOUT_2_shifts(
+    KC_MEDIA_EJECT, BR_DOWN, BR_UP, _______, _______, _______, _______, KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, KC_NO, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, KC_NO,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+
+  /* ,-----------------------------------------------------------------------------------------.
+   * |     |     |     |     |     |     |     |     |  %  |  (  |  )  |  < |  > |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |        |     |     |     |     |     |     |  *  |  0  |  1  |  2  |  3  |     |        |
+   * |-----------------------------------------------------------------------------------------+
+   * |          |     |     |     |     |     |     |  .  |  -  |  4  |  5  |  6  |            |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |     |     |     |     |     |     |  ,  |  =  |  7  |  8  |  9  |     |     |
+   * |-----------------------------------------------------------------------------------------+
+   * |      |      |      |                                      |     |     |     |     |     |
+   * `-----------------------------------------------------------------------------------------'
+   */
+  [_NL] = LAYOUT_2_shifts(
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_PERCENT, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_LEFT_ANGLE_BRACKET, KC_RIGHT_ANGLE_BRACKET, KC_NO, _______,
+    _______, _______, _______, _______, _______, _______, _______, KC_ASTERISK, KC_0, KC_1, KC_2, KC_3, _______, RESET,
+    _______, _______, _______, _______, _______, _______, _______, KC_DOT, KC_MINS, KC_4, KC_5, KC_6, _______,
+    _______, KC_NO,  _______, _______, _______, _______, _______, _______, KC_COMMA, KC_EQL, KC_7, KC_8, KC_9, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {

keyboards/dz60/keymaps/macos_arrow/readme.md

@@ -15,21 +15,22 @@ My build used the following components:
 
 ```
 ,-----------------------------------------------------------------------------------------.
-| Esc | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -   | =   | Backspace |
+|  `  | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -   | =   | Backspace |
 |-----------------------------------------------------------------------------------------+
 | Tab    | Q   | W   | E   | R   | T   | Y   | U   | I   | O   | P   | [   | ]   |   \    |
 |-----------------------------------------------------------------------------------------+
-| _FL      | A   | S   | D   | F   | G   | H   | J   | K   | L   | ;   | '   | Enter      |
+| _FL/Esc  | A   | S   | D   | F   | G   | H   | J   | K   | L   | ;   | '   | Enter      |
 |-----------------------------------------------------------------------------------------+
-| Shift     | Z   | X   | C   | V   | B   | N   | M   | ,   | .   | /   | _ML | Up  |Shift|
+| Shift     | Z   | X   | C   | V   | B   | N   | M   | ,   | .   | /   |     | Up  |Shift|
 |-----------------------------------------------------------------------------------------+
-| Ctrl | Alt  | Cmd  |                Space               |Cmd/_ML| Alt | Left| Down|Right|
+| Ctrl | Alt  | Cmd  |            _NL / Space             |Cmd/_ML| Alt | Left| Down|Right|
 `-----------------------------------------------------------------------------------------'
 ```
 
-* The escape key use `KC_GESC` to get grave accent on any letter with ``Alt+Esc`` and `` ` `` alone with the ``Hyper+Esc``. The `~` is obtained with `Shift+Esc`. `GRAVE_ESC_GUI_OVERRIDE` is define so `Cmd+Alt+Esc` can still work.
-* The `Caps-Lock` (`Hyper`) key switch to the function layer (`_FL`).
-* The right `Cmd` key is used to switch to the media layer (`_ML`) when used with keys mapped on that layer (the top row). Any other keys just act as a `Cmd+` that key.
+* The escape key is moved to the capslock to get keep grave letter pristine.
+* The `Caps-Lock` (`Hyper`) key switch to the function layer (`_FL`) or escape when used alone.
+* The right `Cmd` key is used to switch to the media layer (`_ML`) when used with keys mapped on that layer.
+* The space key can be used to switch to the numpad layer (`_NL`) when used with one of the mapped key on that layer.
 
 ## Function Layer (_FL)
 
@@ -37,9 +38,9 @@ My build used the following components:
 ,-----------------------------------------------------------------------------------------.
 |  `  | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |    Del    |
 |-----------------------------------------------------------------------------------------+
-|        |     |     |     |     |     |     |     | UP  |     |     |     |     |        |
+|        |     |     |     |     |     |     |PgDwn| PgUp|     |     |     |     |        |
 |-----------------------------------------------------------------------------------------+
-|          |     |     |     |     |     |     | Left| Down|Right|     |     |            |
+|          |     |     |     |     |     | Left| Down| Up  |Right|     |     |            |
 |-----------------------------------------------------------------------------------------+
 |           |     |     |     |     |     |     |     |     |     |     |     |     |     |
 |-----------------------------------------------------------------------------------------+
@@ -47,13 +48,13 @@ My build used the following components:
 `-----------------------------------------------------------------------------------------'
 ```
 
-The function layer is activated by the `Caps-Lock` (`Hyper`) key to access `F` keys. In addition, the `IJKL` are mapped as cursor keys on that layer.
+The function layer is activated by the `Caps-Lock` (`Hyper`) key to access `F` keys. In addition, the `HJKL` are mapped as cursor keys on that layer.
 
 ## Media Layer (_ML)
 
 ```
 ,-----------------------------------------------------------------------------------------.
-|     | BR- | BR+ | F3  | F4  |     |     |PREV |PLAY |NEXT |MUTE | V- | V+ |    Eject    |
+|Eject| BR- | BR+ |     |     |     |     |PREV |PLAY |NEXT |MUTE | V- | V+ |             |
 |-----------------------------------------------------------------------------------------+
 |        |     |     |     |     |     |     |     |     |     |     |     |     |  Reset |
 |-----------------------------------------------------------------------------------------+
@@ -67,4 +68,20 @@ The function layer is activated by the `Caps-Lock` (`Hyper`) key to access `F` k
 
 The media layer is activated by the right `Cmd` (`FN`) key. It contains the typical macos media keys on the top row. Blank keys act as `Cmd+` that key on the base layer.
 
+## Numpad Layer (_NL)
 
+```
+,-----------------------------------------------------------------------------------------.
+|     |     |     |     |     |     |     |     |  %  |  (  |  )  |  < |  > |             |
+|-----------------------------------------------------------------------------------------+
+|        |     |     |     |     |     |     |  *  |  0  |  1  |  2  |  3  |     |        |
+|-----------------------------------------------------------------------------------------+
+|          |     |     |     |     |     |     |  .  |  -  |  4  |  5  |  6  |            |
+|-----------------------------------------------------------------------------------------+
+|           |     |     |     |     |     |     |  ,  |  =  |  7  |  8  |  9  |     |     |
+|-----------------------------------------------------------------------------------------+
+|      |      |      |                                      |     |     |     |     |     |
+`-----------------------------------------------------------------------------------------'
+```
+
+The numpad layer is activated by the space bar, when hold.

keyboards/ergodash/ergodash.h

@@ -43,4 +43,22 @@
         )
 #endif // #ifdef KEYBOARD_ergodash_rev2
 
+#ifdef KEYBOARD_ergodash_mini
+    #include "mini.h"
+
+    // Used to create a keymap using only KC_ prefixed keys
+    #define LAYOUT_kc( \
+        L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+        L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+        L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+        L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36  \
+        ) \
+        LAYOUT( \
+            KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
+            KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
+            KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
+            KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, KC_##R36  \
+        )
+#endif // #ifdef KEYBOARD_ergodash_mini
+
 #endif

keyboards/ergodash/mini/config.h

@@ -0,0 +1,97 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Omkbd
+#define PRODUCT         ErgoDashmini
+#define DESCRIPTION     Power
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+#define C6_AUDIO
+#ifdef AUDIO_ENABLE
+  #define STARTUP_SONG SONG(STARTUP_SOUND)
+  #define GOODBYE_SONG SONG(GOODBYE_SOUND)
+#endif
+
+/* number of backlight levels */
+#ifdef BACKLIGHT_ENABLE
+  #define BACKLIGHT_PIN B6
+  #define BACKLIGHT_LEVELS 7
+//  #define BACKLIGHT_BREATHING
+//  #define BREATHING_PERIOD 4
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 20    // Number of LEDs
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/ergodash/mini/info.json

@@ -0,0 +1,13 @@
+{
+  "keyboard_name": "ErgoDash mini",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 18,
+  "height": 6.25,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 56,
+      "layout": [{"label":"L00", "x":0, "y":1.375}, {"label":"L01", "x":1, "y":1.375}, {"label":"L02", "x":2, "y":1.125}, {"label":"L03", "x":3, "y":1}, {"label":"L04", "x":4, "y":1.125}, {"label":"L05", "x":5, "y":1.25}, {"label":"L06", "x":6, "y":1.75}, {"label":"R00", "x":11, "y":1.75}, {"label":"R01", "x":12, "y":1.25}, {"label":"R02", "x":13, "y":1.125}, {"label":"R03", "x":14, "y":1}, {"label":"R04", "x":15, "y":1.125}, {"label":"R05", "x":16, "y":1.375}, {"label":"R06", "x":17, "y":1.375}, {"label":"L10", "x":0, "y":2.375}, {"label":"L11", "x":1, "y":2.375}, {"label":"L12", "x":2, "y":2.125}, {"label":"L13", "x":3, "y":2}, {"label":"L14", "x":4, "y":2.125}, {"label":"L15", "x":5, "y":2.25}, {"label":"L16", "x":6, "y":2.75}, {"label":"R10", "x":11, "y":2.75}, {"label":"R11", "x":12, "y":2.25}, {"label":"R12", "x":13, "y":2.125}, {"label":"R13", "x":14, "y":2}, {"label":"R14", "x":15, "y":2.125}, {"label":"R15", "x":16, "y":2.375}, {"label":"R16", "x":17, "y":2.375}, {"label":"L20", "x":0, "y":3.375}, {"label":"L21", "x":1, "y":3.375}, {"label":"L22", "x":2, "y":3.125}, {"label":"L23", "x":3, "y":3}, {"label":"L24", "x":4, "y":3.125}, {"label":"L25", "x":5, "y":3.25}, {"label":"L26", "x":6.5, "y":4.25}, {"label":"R20", "x":10.5, "y":4.25}, {"label":"R21", "x":12, "y":3.25}, {"label":"R22", "x":13, "y":3.125}, {"label":"R23", "x":14, "y":3}, {"label":"R24", "x":15, "y":3.125}, {"label":"R25", "x":16, "y":3.375}, {"label":"R26", "x":17, "y":3.375}, {"label":"L30", "x":0, "y":4.375}, {"label":"L31", "x":1, "y":4.375}, {"label":"L32", "x":2, "y":4.125}, {"label":"L33", "x":3, "y":4}, {"label":"L34", "x":5.5, "y":5.25}, {"label":"L35", "x":6.5, "y":5.25}, {"label":"L36", "x":7.5, "y":4.25, "h":2}, {"label":"R30", "x":9.5, "y":4.25, "h":2}, {"label":"R31", "x":10.5, "y":5.25}, {"label":"R32", "x":11.5, "y":5.25}, {"label":"R33", "x":14, "y":4}, {"label":"R34", "x":15, "y":4.125}, {"label":"R35", "x":16, "y":4.375}, {"label":"R36", "x":17, "y":4.375}]
+    }
+  }
+}

keyboards/ergodash/mini/keymaps/default/config.h

@@ -0,0 +1,39 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17

keyboards/ergodash/mini/keymaps/default/keymap.c

@@ -0,0 +1,129 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * |  Esc |   Q  |   W  |   E  |   R  |   T  |   -  |                    |   =  |   Y  |   U  |   I  |   O  |   P  |  \   |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * | Tab  |   A  |   S  |   D  |   F  |   G  |   [  |                    |   ]  |   H  |   J  |   K  |   L  |   ;  |  "   |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  | Space|                    | Enter|   N  |   M  |   ,  |   .  |   /  | Shift|
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|Delete|||||||| Bksp | Enter| Raise|||||||| Left | Down |  Up  | Right|
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   */
+  [_QWERTY] = LAYOUT( \
+    KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_MINS,                        KC_EQL , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS, \
+    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_LBRC,                        KC_RBRC, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC , KC_DEL,        KC_BSPC,KC_ENT , RAISE,            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+  ),
+
+  /* Lower
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * |   `  |   !  |   @  |   #  |   $  |   %  |   _  |                    |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * |   ~  |   1  |   2  |   3  |   4  |   5  |   {  |                    |   }  | Left | Down |  Up  | Right|   :  |  "   |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|Delete|||||||| Bksp | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   */
+  [_LOWER] = LAYOUT(
+    KC_GRV , KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
+    KC_TILD, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LCBR,                        KC_RCBR, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT, KC_COLN, KC_DQT , \
+    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC , KC_DEL,        KC_BSPC,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+  ),
+
+  /* Raise
+  * ,----------------------------------------------------------------------------------------------------------------------.
+  * |   `  |   !  |   @  |   #  |   $  |   %  |   _  |                    |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
+  * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+  * |   ~  |   F1 |   F2 |   F3 |   F4 |   F5 |   {  |                    |   }  | Left | Down |  Up  | Right|   :  |  "   |
+  * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+  * | Shift|   F6 |   F7 |   F8 |   F9 |  F10 | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+  * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+  * | Ctrl |  F11 |  F12 | EISU |||||||| Lower| Space|Delete|||||||| Bksp | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
+  * ,----------------------------------------------------------------------------------------------------------------------.
+  */
+  [_RAISE] = LAYOUT(
+    KC_GRV , KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
+    KC_TILD, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT, KC_COLN, KC_DQT , \
+    KC_LSFT, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_F11 , KC_F12,  EISU,             LOWER,   KC_SPC , KC_DEL,        KC_BSPC,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+    ),
+
+  /* Adjust
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * |      | Reset|RGB ON|  MODE|  HUE-|  HUE+|      |                    |      |  SAT-|  SAT+|  VAL-|  VAL+|      |      |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * |      |      |      |      ||||||||      |      |      ||||||||      |      |      ||||||||      |      |      |      |
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   */
+  [_ADJUST] = LAYOUT(
+    _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI,_______,                       _______, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
+    _______, _______, BL_TOGG, BL_BRTG, BL_INC , BL_DEC ,_______,                       _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______,_______,                       _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______,          _______,_______,_______,       _______,_______, _______,          _______, _______, _______, _______  \
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/ergodash/mini/mini.c

@@ -0,0 +1,13 @@
+#include "ergodash.h"
+
+#ifdef AUDIO_ENABLE
+    float tone_startup[][2] = SONG(STARTUP_SOUND);
+    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    led_set_user(usb_led);
+}
+#endif

keyboards/ergodash/mini/mini.h

@@ -0,0 +1,60 @@
+#ifndef MINI_H
+#define MINI_H
+
+#include "ergodash.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+	#include <avr/io.h>
+	#include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#ifndef FLIP_HALF
+// Standard Keymap
+// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
+#define LAYOUT( \
+	L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36  \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05, L06 }, \
+		{ L10, L11, L12, L13, L14, L15, L16 }, \
+		{ L20, L21, L22, L23, L24, L25, L26 }, \
+		{ L30, L31, L32, L33, L34, L35, L36 }, \
+		{ R06, R05, R04, R03, R02, R01, R00 }, \
+		{ R16, R15, R14, R13, R12, R11, R10 }, \
+		{ R26, R25, R24, R23, R22, R21, R20 }, \
+		{ R36, R35, R34, R33, R32, R31, R30 }, \
+	}
+#else
+// Keymap with right side flipped
+// (TRRS jack on both halves are to the right)
+#define LAYOUT( \
+	L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36  \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05, L06 }, \
+		{ L10, L11, L12, L13, L14, L15, L16 }, \
+		{ L20, L21, L22, L23, L24, L25, L26 }, \
+		{ L30, L31, L32, L33, L34, L35, L36 }, \
+		{ R00, R01, R02, R03, R04, R05, R06 }, \
+		{ R10, R11, R12, R13, R14, R15, R16 }, \
+		{ R20, R21, R22, R23, R24, R25, R26 }, \
+		{ R30, R31, R32, R33, R34, R35, R36 }, \
+	}
+#endif
+
+#endif

keyboards/ergodash/mini/readme.md

@@ -0,0 +1,18 @@
+# ErgoDash mini
+
+![ErgoDash mini](https://github.com/omkbd/picture/blob/master/Ergodashmini.jpg)
+
+Keyboard Maintainer: [omkbd](https://github.com/omkbd) [@omkbd](https://twitter.com/omkbd)  
+Hardware Supported: ErgoDash mini PCB, Pro Micro ATmega32u4  
+Hardware Availability: Order your own [yourself](https://github.com/omkbd/ErgoDash)
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ergodash/mini:default
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+
+# Layout
+![layout](https://github.com/omkbd/picture/blob/master/ergodashmini-layout.png)
+![PCB](https://github.com/omkbd/picture/blob/master/Ergodashmini_PCB.jpg)

keyboards/ergodash/mini/rules.mk

@@ -0,0 +1,2 @@
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no

keyboards/ergodash/readme.md

@@ -1,6 +1,6 @@
 # ErgoDash
 
-![ErgoDash](https://github.com/omkbd/picture/blob/master/IMG_20180630_1702141.jpg)
+![ErgoDash](https://github.com/omkbd/picture/blob/master/Ergodash.jpg)
 
 Keyboard Maintainer: [omkbd](https://github.com/omkbd) [@omkbd](https://twitter.com/omkbd)  
 Hardware Supported: ErgoDash PCB, Pro Micro ATmega32u4  
@@ -15,4 +15,4 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
 
 # Layout
 ![layout](https://github.com/omkbd/picture/blob/master/ergodash-layout.png)
-![PCB](https://github.com/omkbd/picture/blob/master/IMG_20180630_2022231.jpg)
+![PCB](https://github.com/omkbd/picture/blob/master/Ergodash_PCB.jpg)

keyboards/ergodash/rev2/config.h

@@ -45,6 +45,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
+#define C6_AUDIO
+
 /* number of backlight levels */
 #ifdef BACKLIGHT_ENABLE
   #define BACKLIGHT_PIN B6

keyboards/ergodash/rev2/keymaps/default/keymap.c

@@ -19,29 +19,29 @@ enum custom_keycodes {
 // Fillers to make layering more clear
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
-#define KC_JPN LALT(KC_GRV)
+#define EISU LALT(KC_GRV)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Qwerty
    * ,----------------------------------------------------------------------------------------------------------------------.
-   * | ESC  |   1  |   2  |   3  |   4  |   5  |   [  |                    |   ]  |   6  |   7  |   8  |   9  |   0  | Caps |
+   * | ESC  |   1  |   2  |   3  |   4  |   5  |   [  |                    |   ]  |   6  |   7  |   8  |   9  |   0  |Pscree|
    * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
    * |  `   |   Q  |   W  |   E  |   R  |   T  |   -  |                    |   =  |   Y  |   U  |   I  |   O  |   P  |  \   |
    * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
    * | Tab  |   A  |   S  |   D  |   F  |   G  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   ;  |  "   |
    * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * | Shift|   Z  |   X  |   C  |   V  |   B  |  JPN |                    | Enter|   N  |   M  |   ,  |   .  |   /  | Shift|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  | Space|                    | Enter|   N  |   M  |   ,  |   .  |   /  | Shift|
    * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * | Ctrl |  GUI |  ALt |Adjust|||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Left | Down |  Up  | Right|
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Left | Down |  Up  | Right|
    * ,----------------------------------------------------------------------------------------------------------------------.
    */
   [_QWERTY] = LAYOUT( \
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LBRC,                        KC_RBRC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_CAPS, \
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LBRC,                        KC_RBRC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_PSCR, \
     KC_GRV,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_MINS,                        KC_EQL , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS, \
     KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_JPN ,                        KC_ENT , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC ,_______,        _______,KC_ENT , RAISE,            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,_______,        _______,KC_ENT , RAISE,            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
   ),
 
   /* Lower
@@ -52,17 +52,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
    * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
    * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * | Shift|   6  |   7  |   8  |   9  |   0  |  JPN |                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
    * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * | Ctrl |  GUI |  ALt |Adjust|||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
    * ,----------------------------------------------------------------------------------------------------------------------.
    */
   [_LOWER] = LAYOUT(
     KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
     KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
     KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
-    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_JPN ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC ,_______,        _______,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,_______,        _______,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
   ),
 
   /* Raise
@@ -73,17 +73,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
    * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
    * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * | Shift|   6  |   7  |   8  |   9  |   0  |  JPN |                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
    * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * | Ctrl |  GUI |  ALt |Adjust|||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
    * ,----------------------------------------------------------------------------------------------------------------------.
    */
   [_RAISE] = LAYOUT(
     KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
     KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
     KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
-    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_JPN ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC ,_______,        _______,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,_______,        _______,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
   ),
 
   /* Adjust

keyboards/ergodash/rev2/rules.mk

@@ -1 +1,2 @@
-BACKLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no

keyboards/ergodash/rules.mk

@@ -64,7 +64,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 SUBPROJECT_rev1 = yes
 USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/ergodone/config.h

@@ -53,8 +53,6 @@
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    5
 
-#define PREVENT_STUCK_MODIFIERS
-
 #define USB_MAX_POWER_CONSUMPTION 500
 
 /* NKRO */

keyboards/ergodox_ez/config.h

@@ -97,8 +97,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define DEBOUNCE    15
 
-#define PREVENT_STUCK_MODIFIERS
-
 #define USB_MAX_POWER_CONSUMPTION 500
 
 // RGB backlight

keyboards/ergodox_ez/keymaps/heartrobotninja/rules.mk

@@ -13,6 +13,7 @@ AUTOLOG_ENABLE = no
 RGBLIGHT_ENABLE = yes
 RGBLIGHT_ANIMATION = yes
 EXTRAKEY_ENABLE = yes
+LEADER_ENABLE = yes
 
 OPT_DEFS += -DUSER_PRINT
 
@@ -31,4 +32,4 @@ OPT_DEFS += -DKEYMAP_VERSION=\"$(KEYMAP_VERSION)\\\#$(KEYMAP_BRANCH)\"
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
-endif
+endif

keyboards/ergodox_ez/keymaps/vim/vim.h

@@ -9,7 +9,6 @@
 
 #define PRESS(keycode) register_code16(keycode)
 #define RELEASE(keycode) unregister_code16(keycode)
-#define PREVENT_STUCK_MODIFIERS
 
 uint16_t VIM_QUEUE = KC_NO;
 

keyboards/ergodox_infinity/keymaps/gordon/config.h

@@ -15,8 +15,6 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#define PREVENT_STUCK_MODIFIERS
-
 #undef  IGNORE_MOD_TAP_INTERRUPT
 #define IGNORE_MOD_TAP_INTERRUPT
 

keyboards/ergodox_infinity/keymaps/narze/config.h

@@ -13,7 +13,6 @@
 
 #define IGNORE_MOD_TAP_INTERRUPT
 #define PERMISSIVE_HOLD
-#define PREVENT_STUCK_MODIFIERS
 
 #undef MOUSEKEY_DELAY
 #define MOUSEKEY_DELAY 100

keyboards/ergodox_infinity/keymaps/not-quite-neo/rules.mk

@@ -1,2 +1,3 @@
 BACKLIGHT_ENABLE = yes
-UNICODE_ENABLE = yes
+UNICODE_ENABLE = yes
+LEADER_ENABLE = yes

keyboards/ergoinu/config.h

@@ -31,8 +31,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT         ergoinu
 #define DESCRIPTION     An (Not Portable But Small) Ergonomic split keyboard
 
-
-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100
 

keyboards/ergotravel/keymaps/ckofy/config.h

@@ -33,9 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define TAPPING_TOGGLE 2
 
-// required if modifiers are defined in layers besided the default one.
-#define PREVENT_STUCK_MODIFIERS
-
 #undef RGBLED_NUM
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 12

keyboards/felix/config.h

@@ -42,8 +42,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
 
 /* there is no rgb underglow by default. */
 #define RGB_DI_PIN
@@ -53,4 +51,4 @@
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 
-#endif
+#endif

keyboards/four_banger/config.h

@@ -43,9 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E6
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -55,4 +52,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 
-#endif
+#endif

keyboards/fourier/keymaps/jennetters/config.h

@@ -22,10 +22,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define TAPPING_TERM 100
 
-/* Try to prevent sticky keys */
-#define PREVENT_STUCK_MODIFIERS
-
 /* Use I2C or Serial, not both */
 
 #define USE_SERIAL
-// #define USE_I2C
+// #define USE_I2C

keyboards/fractal/config.h

@@ -43,10 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0

keyboards/frosty_flake/keymaps/nikchi/rules.mk

@@ -1,5 +1,5 @@
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -17,6 +17,7 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 TAP_DANCE_ENABLE = yes
+LEADER_ENABLE = yes
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile

keyboards/gh80_3000/config.h

@@ -43,10 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0
@@ -55,4 +51,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 
-#endif
+#endif

keyboards/gherkin/config.h

@@ -43,10 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0
@@ -55,4 +51,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 
-#endif
+#endif

keyboards/gherkin/keymaps/talljoe_gherkin/config.h

@@ -3,6 +3,4 @@
 
 #include "../../config.h"
 
-#define PREVENT_STUCK_MODIFIERS
-
-#endif
+#endif

keyboards/gonnerd/keymaps/gam3cat/config.h

@@ -1,7 +1,6 @@
 #include "../../config.h"
 //GRAVE_ESC override for CTRL+SHIFT+ESC Windows task manager shortcut.
 #define GRAVE_ESC_CTRL_OVERRIDE
-#define PREVENT_STUCK_MODIFIERS
 
 //Delay matrix scan for tap dance, reduce to activate modifier keys faster.
 //#define TAPPING_TERM 200

keyboards/hadron/keymaps/default/config.h

@@ -5,7 +5,6 @@
 
 #define LEADER_TIMEOUT 300
 //#define BACKLIGHT_BREATHING
-#define PREVENT_STUCK_MODIFIERS
 
 #define USE_I2C
 #define SSD1306OLED

keyboards/hadron/keymaps/side_numpad/config.h

@@ -5,7 +5,6 @@
 
 #define LEADER_TIMEOUT 300
 //#define BACKLIGHT_BREATHING
-#define PREVENT_STUCK_MODIFIERS
 
 #define USE_I2C
 #define SSD1306OLED

keyboards/handwired/MS_sculpt_mobile/config.h

@@ -28,10 +28,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DESCRIPTION     6000
 
 /* key matrix size */
-#define MATRIX_ROWS 8 
-#define MATRIX_COLS 18 
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
 
-#ifdef ASTAR 
+#ifdef ASTAR
 #define PRODUCT         sculpt mobile astar
                         /*0   1   2   3    4   5  6   7   8 */
 #define MATRIX_ROW_PINS {D7, C6, D4, D0, D1, D3, D2, E2}
@@ -95,6 +95,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-#define PREVENT_STUCK_MODIFIERS
-
 #endif

keyboards/handwired/atreus50/keymaps/ajp10304/config.h

@@ -3,8 +3,6 @@
 
 #include "../../config.h"
 
-#define PREVENT_STUCK_MODIFIERS
-
 #undef MATRIX_ROW_PINS
 #undef MATRIX_COL_PINS
 

keyboards/handwired/dactyl/config.h

@@ -63,8 +63,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    15
 
-#define PREVENT_STUCK_MODIFIERS
-
 #define USB_MAX_POWER_CONSUMPTION 500
 
 #endif

keyboards/handwired/kbod/config.h

@@ -48,7 +48,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
- 
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
@@ -159,8 +159,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-#define PREVENT_STUCK_MODIFIERS
-
 #undef TAPPING_TOGGLE
 #define TAPPING_TOGGLE 2
 

keyboards/handwired/promethium/keymaps/default/config.h

@@ -11,8 +11,6 @@
 /* skip bootmagic and eeconfig */
 #define BOOTMAGIC_KEY_SKIP              KC_SPACE
 
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGBSPS_ENABLE
 #define RGBSPS_DEMO_ENABLE
 

keyboards/handwired/promethium/keymaps/priyadi/config.h

@@ -11,8 +11,6 @@
 /* skip bootmagic and eeconfig */
 #define BOOTMAGIC_KEY_SKIP              KC_SPACE
 
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGBSPS_ENABLE
 #define RGBSPS_DEMO_ENABLE
 

keyboards/handwired/space_oddity/config.h

@@ -49,10 +49,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0

keyboards/helix/pico/config.h

@@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DESCRIPTION     A split keyboard for the cheap makers
 
 
-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100
 

keyboards/helix/rev1/keymaps/OLED_sample/config.h

@@ -35,7 +35,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define SSD1306OLED
 
-#define PREVENT_STUCK_MODIFIERS
+#define USE_SERIAL_PD2
+
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100
 

keyboards/helix/rev2/config.h

@@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DESCRIPTION     A split keyboard for the cheap makers
 
 
-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100
 

keyboards/hhkb/keymaps/blakedietz/rules.mk

@@ -1,2 +1,3 @@
 TAP_DANCE_ENABLE = no
 UNICODE_ENABLE   = no
+LEADER_ENABLE = yes

keyboards/infinity60/config.h

@@ -18,8 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_H
 #define CONFIG_H
 
-#define PREVENT_STUCK_MODIFIERS
-
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0x1c11
 #define PRODUCT_ID      0xb04d

keyboards/iris/keymaps/davidrambo/config.h

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Select hand configuration */
 #define PERMISSIVE_HOLD
-#define PREVENT_STUCK_MODIFIERS
 #define MASTER_LEFT
 // #define MASTER_RIGHT
 // #define EE_HANDS

keyboards/iris/keymaps/jennetters/config.h

@@ -19,9 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define TAPPING_TERM 150
 
-/* Try to prevent sticky keys */
-#define PREVENT_STUCK_MODIFIERS
-
 /* Use I2C or Serial, not both */
 
 #define USE_SERIAL
@@ -38,4 +35,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 12
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_VAL_STEP 8