Initial unorthodox support

* Added FiNeX custom Redox Layout, first commit.

* updated readme

* removed old code

docs/features.md

@@ -8,7 +8,7 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [Auto Shift](feature_auto_shift.md) - Tap for the normal key, hold slightly longer for its shifted state.
 * [Backlight](feature_backlight.md) - LED lighting support for your keyboard.
 * [Bootmagic](feature_bootmagic.md) - Adjust the behavior of your keyboard using hotkeys.
-* [Combos](feature_combos.md) - Custom actions for multiple key holds.
+* [Combos](feature_combo.md) - Custom actions for multiple key holds.
 * [Command](feature_command.md) - Runtime version of bootmagic (Formerly known as "Magic").
 * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself.
 * [Grave Escape](feature_grave_esc.md) - Lets you use a single key for Esc and Grave. 

docs/i2c_driver.md

@@ -8,7 +8,6 @@ The I2C Master drivers used in QMK have a set of common functions to allow porta
 |------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
 |`void i2c_init(void);`                                                                                            |Initializes the I2C driver. This function should be called once before any transaction is initiated.                                                                         |
 |`uint8_t i2c_start(uint8_t address);`                                                                             |Starts an I2C transaction. Address is the 7-bit slave address without the direction bit.                                                                                     |
-|`uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                        |Transmit data over I2C. Address is the 7-bit slave address without the direction.                                                                                            |
 |`uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                        |Transmit data over I2C. Address is the 7-bit slave address without the direction. Returns status of transaction.                                                             |
 |`uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                         |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. |
 |`uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`       |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written.                                                                          |

docs/keycodes.md

@@ -141,9 +141,9 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_LOCKING_SCROLL`    |`KC_LSCR`           |Locking Scroll Lock                            |
 |`KC_KP_COMMA`          |`KC_PCMM`           |Keypad `,`                                     |
 |`KC_KP_EQUAL_AS400`    |                    |Keypad `=` on AS/400 keyboards                 |
-|`KC_INT1`              |`KC_RO`             |JIS `\` and <code>&#124;</code>                |
+|`KC_INT1`              |`KC_RO`             |JIS `\` and `_`                                |
 |`KC_INT2`              |`KC_KANA`           |JIS Katakana/Hiragana                          |
-|`KC_INT3`              |`KC_JYEN`           |JIS `¥`                                        |
+|`KC_INT3`              |`KC_JYEN`           |JIS `¥` and <code>&#124;</code>                |
 |`KC_INT4`              |`KC_HENK`           |JIS Henkan                                     |
 |`KC_INT5`              |`KC_MHEN`           |JIS Muhenkan                                   |
 |`KC_INT6`              |                    |JIS Numpad `,`                                 |

docs/keycodes_basic.md

@@ -123,9 +123,9 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 |Key       |Aliases  |Description                    |
 |----------|---------|-------------------------------|
-|`KC_INT1` |`KC_RO`  |JIS `\` and <code>&#124;</code>|
+|`KC_INT1` |`KC_RO`  |JIS `\` and `_`                |
 |`KC_INT2` |`KC_KANA`|JIS Katakana/Hiragana          |
-|`KC_INT3` |`KC_JYEN`|JIS `¥`                        |
+|`KC_INT3` |`KC_JYEN`|JIS `¥` and <code>&#124;</code>|
 |`KC_INT4` |`KC_HENK`|JIS Henkan                     |
 |`KC_INT5` |`KC_MHEN`|JIS Muhenkan                   |
 |`KC_INT6` |         |JIS Numpad `,`                 |

keyboards/412_64/412_64.c

@@ -0,0 +1,29 @@
+
+#include "412_64.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/412_64/412_64.h

@@ -0,0 +1,29 @@
+
+#ifndef FOURx16_H
+#define FOURx16_H
+
+#include "quantum.h"
+#define ___ KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT_ortho_4x16( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \
+    K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K30, K31, \
+    K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, K46, K47, \
+    K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K60, K61, K62, K63 \
+) \
+{ \
+    { K00, K02, K04, K06, K08, K10, K12, K14 }, \
+    { K01, K03, K05, K07, K09, K11, K13, K15 }, \
+    { K16, K18, K20, K22, K24, K26, K28, K30 }, \
+    { K17, K19, K21, K23, K25, K27, K29, K31 }, \
+    { K32, K34, K36, K38, K40, K42, K44, K46 }, \
+    { K33, K35, K37, K39, K41, K43, K45, K47 }, \
+    { K48, K50, K52, K54, K56, K58, K60, K62 }, \
+    { K49, K51, K53, K55, K57, K59, K61, K63 } \
+}
+
+#endif

keyboards/412_64/config.h

@@ -0,0 +1,202 @@
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xF7E0
+#define PRODUCT_ID      0x0412
+#define DEVICE_VER      0x0000
+#define MANUFACTURER    EDI/SCI
+#define PRODUCT         412 64 Model 00
+#define DESCRIPTION     A compact 60% keyboard inspired by the 4x4x4x4x4
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D3, F4, F5, F6, F7, B1, B3, B2 }
+#define MATRIX_COL_PINS { B0, D2, D0, D1, D4, C6, D7, E6 }
+#define UNUSED_PINS { B4, B5, B6, B7, C7, F0, F1 }
+
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN C7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+

keyboards/412_64/keymaps/default/config.h

@@ -0,0 +1,5 @@
+
+
+#pragma once
+
+// place overrides here

keyboards/412_64/keymaps/default/keymap.c

@@ -0,0 +1,105 @@
+
+#include QMK_KEYBOARD_H
+
+#define _MAIN 0
+#define _RAISE 1
+#define _LOWER 2
+
+// Readability keycodes
+#define LOWER   MO(_LOWER)
+#define RAISE   MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+/* MAIN
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------.
+ * | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | Backsp | Delete |   7    |   8    |   9    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | ESC    | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      |  PgUp  |   4    |   5    |   6    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | SHIFT  | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | ENTER  |  PgDn  |   1    |   2    |   3    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | LCTRL  |  PAUS  | GUI    | ALT    | Lower  | Space  |  Space | Raise  | Left   | Down   | Up     | Right  |  Shift |   0    |   .    |  ENTER |
+ * '-----------------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_MAIN] = LAYOUT_ortho_4x16(
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, KC_DEL, KC_KP_7, KC_KP_8, KC_KP_9,
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_PGUP, KC_KP_4, KC_KP_5, KC_KP_6,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  KC_PGDN, KC_KP_1, KC_KP_2, KC_KP_3,
+  KC_LCTL, KC_PAUS, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_RSFT, KC_KP_0, KC_KP_DOT, KC_PENT
+  ),
+
+/* RAISE
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------.
+ * |    `   |  1     |  2     |  3     |  4     |  5     |  6     |  7     |  8     |  9     |  0     |        | Insert |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |        | -      | =      | [      | ]      |   \    |  Home  |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |        |  ISO # |  ISO / |        |        |  PScr  |  End   |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |                 |        |  Next  |  Vol-  |  Vol+  |  Play  |        |        |        |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_RAISE] = LAYOUT_ortho_4x16(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, KC_INS, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, KC_NUHS, KC_NUBS, _______, _______, KC_PSCR, KC_END, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______, _______
+  ),
+
+/* LOWER
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------.
+ * |    ~   |    !   |    @   |    #   |    $   |    %   |    ^   |    &   |    *   |    (   |    )   |        |        |        |        | Reset  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |   F1   |   F2   |   F3   |   F4   |   F5   |   F6   |    _   |    +   |    {   |    }   |   |    |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |   F7   |   F8   |   F9   |  F10   |  F11   |  F12   | ISO ~  | ISO |  |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |                 |        |        |        |        |  Mute  |        |        |        |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_LOWER] = LAYOUT_ortho_4x16(
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,  _______, _______, _______, RESET,
+  _______,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS,  KC_LCBR, KC_RCBR, KC_PIPE, _______, _______, _______, _______,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS), _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, _______, _______
+  ),
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  keyevent_t event = record->event;
+    (void)event;
+
+  switch (id) {
+
+  }
+  return MACRO_NONE;
+}
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/412_64/keymaps/default/rules.mk

@@ -0,0 +1 @@
+KEY_LOCK_ENABLE = yes       # Enable the universal locking key, which lets you do any locking you require.

keyboards/412_64/readme.md

@@ -0,0 +1,15 @@
+# 412-64
+
+![412-64](image_here)
+
+A compact 60% keyboard designed by Fate Everywhere and sold on a limited basis. Born out of the desire for a Planck with a numpad for technical work.
+
+Keyboard Maintainer: [Fate Everywhere](https://github.com/fateeverywhere)  
+Hardware Supported: 4x16 T&E Prototype, 412-64 Mk. 0, Mk. 1.  
+Hardware Availability: Highly limited, contact /u/FateEverywhere on reddit for availability.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 412-64:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/412_64/rules.mk

@@ -0,0 +1,73 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = ortho_4x16 

keyboards/clueboard/unorthodox/boards/GENERIC_STM32_F303XC/board.c

@@ -0,0 +1,126 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief   SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif /* HAL_USE_SDC */
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}

keyboards/clueboard/unorthodox/boards/GENERIC_STM32_F303XC/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

keyboards/clueboard/unorthodox/bootloader_defs.h

@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800

keyboards/clueboard/unorthodox/chconf.h

@@ -0,0 +1,520 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        TRUE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/clueboard/unorthodox/config.h

@@ -0,0 +1,121 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC1ED
+#define PRODUCT_ID      0x23C0
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Clueboard
+#define PRODUCT         Unorthodox
+#define DESCRIPTION     A compact row-staggered keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 8
+
+#define MATRIX_ROW_PINS { B4, B3, B2, B1, B0 }
+#define MATRIX_COL_PINS { B5, A3, A2, A1, A0, B13, B14, B15 }
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 6
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+// #define WS2812_LED_N 2
+// #define RGBLED_NUM WS2812_LED_N
+// #define WS2812_TIM_N 2
+// #define WS2812_TIM_CH 2
+// #define PORT_WS2812     GPIOA
+// #define PIN_WS2812      1
+// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+//#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
+//#define WS2812_EXTERNAL_PULLUP
+

keyboards/clueboard/unorthodox/halconf.h

@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI                FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/clueboard/unorthodox/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-/* Copyright 2017 Jason Williams (Wilba)
+/* Copyright 2018 Zach White
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,27 +13,15 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#pragma once
 
-#define PROTOCOL_VERSION 0x0001
+#include QMK_KEYBOARD_H
 
-enum m6_b_command_id
-{
-	id_get_protocol_version = 0x01, // always 0x01
-	id_get_keyboard_value,
-	id_set_keyboard_value,
-	id_dynamic_keymap_get_keycode,
-	id_dynamic_keymap_set_keycode,
-	id_dynamic_keymap_reset,
-	id_backlight_config_set_value,
-	id_backlight_config_get_value,
-	id_backlight_config_save,
-	id_eeprom_reset,
-	id_bootloader_jump,
-	id_unhandled = 0xFF,
-};
-
-enum m6_b_keyboard_value_id
-{
-	id_uptime = 0x01
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT(\
+    KC_INS,             KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F1, \
+    KC_DEL,          KC_TAB,  KC_Q, KC_W, KC_E, KC_R, KC_T, KC_F2, \
+                  KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_F3, \
+             KC_LSFT,    KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F4, \
+    KC_HOME, KC_END, KC_LCTL,    KC_LGUI, KC_LALT, KC_SPC, KC_F5 \
+  )
 };

keyboards/clueboard/unorthodox/mcuconf.h

@@ -0,0 +1,257 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_UART4SW                       STM32_UART4SW_PCLK
+#define STM32_UART5SW                       STM32_UART5SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+#undef STM32_HSE_BYPASS
+// #error "oh no"
+// #endif
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_USE_ADC4                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC4_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC4_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  TRUE
+#define STM32_GPT_USE_TIM7                  TRUE
+#define STM32_GPT_USE_TIM8                  TRUE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  TRUE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* MCUCONF_H */

keyboards/clueboard/unorthodox/readme.md

@@ -0,0 +1,14 @@
+Unorthodox
+==========
+
+A split row-staggered keyboard with a symetric layout.
+
+Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+Hardware Supported: Unorthodox Kit w/Proton C
+Hardware Availability: TBD
+
+Make example for this keyboard (after setting up your build environment):
+
+    make clueboard/unorthodox:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/clueboard/unorthodox/rules.mk

@@ -0,0 +1,51 @@
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F3xx
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F303xC
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f3xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = GENERIC_STM32_F303XC
+
+# Cortex version
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+
+USE_FPU = yes
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes  # Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes     # USB Nkey Rollover
+AUDIO_ENABLE = yes
+RGBLIGHT_ENABLE = no
+# SERIAL_LINK_ENABLE = yes

keyboards/clueboard/unorthodox/unorthodox.c

@@ -0,0 +1,25 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "unorthodox.h"
+
+void matrix_init_kb(void) {
+  // Turn status LED on
+  //setPinOutput(C13);
+  //writePinHigh(C13);
+
+  matrix_init_user();
+}

keyboards/clueboard/unorthodox/unorthodox.h

@@ -0,0 +1,32 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "quantum.h"
+
+#define LAYOUT(\
+    k00,          k01, k02, k03, k04, k05, k06, k07, \
+    k10,        k11, k12, k13, k14, k15, k16, k17, \
+              k21, k22, k23, k24, k25, k26, k27, \
+         k31,    k32, k33, k34, k35, k36, k37, \
+    k40, k41, k42,    k43,   k44,    k46, k47 \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+    { KC_NO, k21, k22, k23, k24, k25, k26, k27 }, \
+    { KC_NO, k31, k32, k33, k34, k35, k36, k37 }, \
+    { k40, k41, k42, k43, k44, KC_NO, k46, k47 }, \
+}

keyboards/converter/ibm_terminal/README.md

@@ -1,40 +0,0 @@
-Keyboard converter for IBM terminal keyboard
-============================================
-
-This is a port of TMK's converter/terminal_usb to QMK.
-
-It supports PS/2 Scan Code Set 3 and runs on USB AVR chips such like PJRC Teensy.
-I tested the converter on ATMega32U4 with 1392595(102keys) and 6110345(122keys).
-
-Source code: https://github.com/qmk/qmk_firmware.git
-Article: http://geekhack.org/index.php?topic=27272.0
-
-
-CONNECTION
-----------
-Keyboard    ATMega32U4
-----------------------
-Data:       PD2
-Clock:      PD5
-
-And VCC and GND, of course. See RESOURCE for keyboard connector pin assign.
-
-
-BUILD
------
-$ git clone https://github.com/qmk/qmk_firmware.git
-$ cd qmk_firmware
-$ make converter/ibm_terminal:default
-
-
-RESOURCE
---------
-Soarer's Converter: http://geekhack.org/index.php?topic=17458.0
-102keys(1392595): http://geekhack.org/index.php?topic=10737.0
-122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html
-KbdBabel: http://www.kbdbabel.org/
-RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png
-DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png
-WinAVR: http://winavr.sourceforge.net/
-
-EOF

keyboards/converter/ibm_terminal/ibm_terminal.h

@@ -19,7 +19,7 @@ void matrix_init_user(void);
  * 17|         |
  *   +---------+
  */
-#define KEYMAP( \
+#define LAYOUT( \
                   K08,K10,K18,K20,K28,K30,K38,K40,K48,K50,K57,K5F,                                         \
                   K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E,                                         \
                                                                                                            \
@@ -45,13 +45,13 @@ void matrix_init_user(void);
     { K68,   K69,   K6A,   K6B,   K6C,   K6D,   K6E,   K6F   }, \
     { K70,   K71,   K72,   K73,   K74,   K75,   K76,   K77   }, \
     { K78,   K79,   K7A,   K7B,   K7C,   K7D,   K7E,   KC_NO }, \
-    { KC_NO, KC_NO, KC_NO, K83,   K84,   KC_NO, KC_NO, KC_NO,}, \
+    { KC_NO, KC_NO, KC_NO, K83,   K84,   KC_NO, KC_NO, KC_NO }  \
 }
 
 /*
  * IBM Terminal keyboard 1399625, 101-key
  */
-#define KEYMAP_101( \
+#define LAYOUT_101( \
     K08,    K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E,  K57,K5F,K62,                   \
                                                                                              \
     K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66,  K67,K6E,K6F,  K76,K77,K7E,K84, \
@@ -76,7 +76,7 @@ void matrix_init_user(void);
     { KC_NO, K69,   K6A,   K6B,   K6C,   K6D,   K6E,   K6F   }, \
     { K70,   K71,   K72,   K73,   K74,   K75,   K76,   K77   }, \
     { KC_NO, K79,   K7A,   KC_NO, K7C,   K7D,   K7E,   KC_NO }, \
-    { KC_NO, KC_NO, KC_NO, KC_NO, K84,   KC_NO, KC_NO, KC_NO,}, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, K84,   KC_NO, KC_NO, KC_NO }  \
 }
 
-#endif
+#endif

keyboards/converter/ibm_terminal/info.json

@@ -0,0 +1,245 @@
+{
+  "keyboard_name": "Keyboard converter for IBM terminal keyboard",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 24.75,
+  "height": 8,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"label":"F13", "x":3.25, "y":0},
+        {"label":"F14", "x":4.25, "y":0},
+        {"label":"F15", "x":5.25, "y":0},
+        {"label":"F16", "x":6.25, "y":0},
+        {"label":"F17", "x":7.25, "y":0},
+        {"label":"F18", "x":8.25, "y":0},
+        {"label":"F19", "x":9.25, "y":0},
+        {"label":"F20", "x":10.25, "y":0},
+        {"label":"F21", "x":11.25, "y":0},
+        {"label":"F22", "x":12.25, "y":0},
+        {"label":"F23", "x":13.25, "y":0},
+        {"label":"F24", "x":14.25, "y":0},
+        {"label":"F1", "x":3.25, "y":1},
+        {"label":"F2", "x":4.25, "y":1},
+        {"label":"F3", "x":5.25, "y":1},
+        {"label":"F4", "x":6.25, "y":1},
+        {"label":"F5", "x":7.25, "y":1},
+        {"label":"F6", "x":8.25, "y":1},
+        {"label":"F7", "x":9.25, "y":1},
+        {"label":"F8", "x":10.25, "y":1},
+        {"label":"F9", "x":11.25, "y":1},
+        {"label":"F10", "x":12.25, "y":1},
+        {"label":"F11", "x":13.25, "y":1},
+        {"label":"F12", "x":14.25, "y":1},
+        {"label":"Print Screen", "x":0, "y":3},
+        {"label":"Esc", "x":1, "y":3},
+        {"label":"Esc", "x":2.25, "y":3},
+        {"label":"1", "x":3.25, "y":3},
+        {"label":"2", "x":4.25, "y":3},
+        {"label":"3", "x":5.25, "y":3},
+        {"label":"4", "x":6.25, "y":3},
+        {"label":"5", "x":7.25, "y":3},
+        {"label":"6", "x":8.25, "y":3},
+        {"label":"7", "x":9.25, "y":3},
+        {"label":"8", "x":10.25, "y":3},
+        {"label":"9", "x":11.25, "y":3},
+        {"label":"0", "x":12.25, "y":3},
+        {"label":"-", "x":13.25, "y":3},
+        {"label":"=", "x":14.25, "y":3},
+        {"label":"No", "x":15.25, "y":3},
+        {"label":"Back Space", "x":16.25, "y":3},
+        {"label":"Insert", "x":17.5, "y":3},
+        {"label":"Home", "x":18.5, "y":3},
+        {"label":"Page Up", "x":19.5, "y":3},
+        {"label":"Num Lock", "x":20.75, "y":3},
+        {"label":"/", "x":21.75, "y":3},
+        {"label":"*", "x":22.75, "y":3},
+        {"label":"-", "x":23.75, "y":3},
+        {"label":"Scroll Lock", "x":0, "y":4},
+        {"label":"Int4", "x":1, "y":4},
+        {"label":"Tab", "x":2.25, "y":4, "w":1.5},
+        {"label":"Q", "x":3.75, "y":4},
+        {"label":"W", "x":4.75, "y":4},
+        {"label":"E", "x":5.75, "y":4},
+        {"label":"R", "x":6.75, "y":4},
+        {"label":"T", "x":7.75, "y":4},
+        {"label":"Y", "x":8.75, "y":4},
+        {"label":"U", "x":9.75, "y":4},
+        {"label":"I", "x":10.75, "y":4},
+        {"label":"O", "x":11.75, "y":4},
+        {"label":"P", "x":12.75, "y":4},
+        {"label":"[", "x":13.75, "y":4},
+        {"label":"]", "x":14.75, "y":4},
+        {"label":"No", "x":15.75, "y":4, "w":1.5},
+        {"label":"Delete", "x":17.5, "y":4},
+        {"label":"End", "x":18.5, "y":4},
+        {"label":"Page Down", "x":19.5, "y":4},
+        {"label":"7", "x":20.75, "y":4},
+        {"label":"8", "x":21.75, "y":4},
+        {"label":"9", "x":22.75, "y":4},
+        {"label":"+", "x":23.75, "y":4},
+        {"label":"Pause", "x":0, "y":5},
+        {"label":"Int5", "x":1, "y":5},
+        {"label":"Caps Lock", "x":2.25, "y":5, "w":1.75},
+        {"label":"A", "x":4, "y":5},
+        {"label":"S", "x":5, "y":5},
+        {"label":"D", "x":6, "y":5},
+        {"label":"F", "x":7, "y":5},
+        {"label":"G", "x":8, "y":5},
+        {"label":"H", "x":9, "y":5},
+        {"label":"J", "x":10, "y":5},
+        {"label":"K", "x":11, "y":5},
+        {"label":"L", "x":12, "y":5},
+        {"label":";", "x":13, "y":5},
+        {"label":"'", "x":14, "y":5},
+        {"label":"\\", "x":15, "y":5},
+        {"label":"Enter", "x":16, "y":5, "w":1.25},
+        {"label":"Up", "x":18.5, "y":5},
+        {"label":"4", "x":20.75, "y":5},
+        {"label":"5", "x":21.75, "y":5},
+        {"label":"6", "x":22.75, "y":5},
+        {"label":",", "x":23.75, "y":5},
+        {"label":"App", "x":0, "y":6},
+        {"label":"Int6", "x":1, "y":6},
+        {"label":"Shift", "x":2.25, "y":6, "w":1.25},
+        {"label":"ISO \\", "x":3.5, "y":6},
+        {"label":"Z", "x":4.5, "y":6},
+        {"label":"X", "x":5.5, "y":6},
+        {"label":"C", "x":6.5, "y":6},
+        {"label":"V", "x":7.5, "y":6},
+        {"label":"B", "x":8.5, "y":6},
+        {"label":"N", "x":9.5, "y":6},
+        {"label":"M", "x":10.5, "y":6},
+        {"label":",", "x":11.5, "y":6},
+        {"label":".", "x":12.5, "y":6},
+        {"label":"/", "x":13.5, "y":6},
+        {"label":"No", "x":14.5, "y":6},
+        {"label":"Shift", "x":15.5, "y":6, "w":1.75},
+        {"label":"Left", "x":17.5, "y":6},
+        {"label":"Int2", "x":18.5, "y":6},
+        {"label":"Right", "x":19.5, "y":6},
+        {"label":"1", "x":20.75, "y":6},
+        {"label":"2", "x":21.75, "y":6},
+        {"label":"3", "x":22.75, "y":6},
+        {"label":"Enter", "x":23.75, "y":6},
+        {"label":"RGUI", "x":0, "y":7},
+        {"label":"lgui", "x":1, "y":7},
+        {"label":"Ctrl", "x":2.25, "y":7, "w":1.5},
+        {"label":"Alt", "x":4.75, "y":7, "w":1.5},
+        {"label":"Space", "x":6.25, "y":7, "w":7},
+        {"label":"Alt", "x":13.25, "y":7, "w":1.5},
+        {"label":"Ctrl", "x":15.75, "y":7, "w":1.5},
+        {"label":"Down", "x":18.5, "y":7},
+        {"label":"No", "x":20.75, "y":7},
+        {"label":"0", "x":21.75, "y":7},
+        {"label":".", "x":22.75, "y":7},
+        {"label":"No", "x":23.75, "y":7}
+      ]
+    },
+    "LAYOUT_101": {
+      "layout": [
+        {"label":"Esc", "x":0, "y":0},
+        {"label":"F1", "x":2, "y":0},
+        {"label":"F2", "x":3, "y":0},
+        {"label":"F3", "x":4, "y":0},
+        {"label":"F4", "x":5, "y":0},
+        {"label":"F5", "x":6.5, "y":0},
+        {"label":"F6", "x":7.5, "y":0},
+        {"label":"F7", "x":8.5, "y":0},
+        {"label":"F8", "x":9.5, "y":0},
+        {"label":"F9", "x":11, "y":0},
+        {"label":"F10", "x":12, "y":0},
+        {"label":"F11", "x":13, "y":0},
+        {"label":"F12", "x":14, "y":0},
+        {"label":"Print Screen", "x":15.25, "y":0},
+        {"label":"Scroll Lock", "x":16.25, "y":0},
+        {"label":"Pause", "x":17.25, "y":0},
+        {"label":"`", "x":0, "y":2},
+        {"label":"1", "x":1, "y":2},
+        {"label":"2", "x":2, "y":2},
+        {"label":"3", "x":3, "y":2},
+        {"label":"4", "x":4, "y":2},
+        {"label":"5", "x":5, "y":2},
+        {"label":"6", "x":6, "y":2},
+        {"label":"7", "x":7, "y":2},
+        {"label":"8", "x":8, "y":2},
+        {"label":"9", "x":9, "y":2},
+        {"label":"0", "x":10, "y":2},
+        {"label":"-", "x":11, "y":2},
+        {"label":"=", "x":12, "y":2},
+        {"label":"Back Space", "x":13, "y":2, "w":2},
+        {"label":"Insert", "x":15.25, "y":2},
+        {"label":"Home", "x":16.25, "y":2},
+        {"label":"Page Up", "x":17.25, "y":2},
+        {"label":"Num Lock", "x":18.5, "y":2},
+        {"label":"/", "x":19.5, "y":2},
+        {"label":"*", "x":20.5, "y":2},
+        {"label":"-", "x":21.5, "y":2},
+        {"label":"Tab", "x":0, "y":3, "w":1.5},
+        {"label":"Q", "x":1.5, "y":3},
+        {"label":"W", "x":2.5, "y":3},
+        {"label":"E", "x":3.5, "y":3},
+        {"label":"R", "x":4.5, "y":3},
+        {"label":"T", "x":5.5, "y":3},
+        {"label":"Y", "x":6.5, "y":3},
+        {"label":"U", "x":7.5, "y":3},
+        {"label":"I", "x":8.5, "y":3},
+        {"label":"O", "x":9.5, "y":3},
+        {"label":"P", "x":10.5, "y":3},
+        {"label":"[", "x":11.5, "y":3},
+        {"label":"]", "x":12.5, "y":3},
+        {"label":"\\", "x":13.5, "y":3, "w":1.5},
+        {"label":"Delete", "x":15.25, "y":3},
+        {"label":"End", "x":16.25, "y":3},
+        {"label":"Page Down", "x":17.25, "y":3},
+        {"label":"7", "x":18.5, "y":3},
+        {"label":"8", "x":19.5, "y":3},
+        {"label":"9", "x":20.5, "y":3},
+        {"label":"Caps Lock", "x":0, "y":4, "w":1.75},
+        {"label":"A", "x":1.75, "y":4},
+        {"label":"S", "x":2.75, "y":4},
+        {"label":"D", "x":3.75, "y":4},
+        {"label":"F", "x":4.75, "y":4},
+        {"label":"G", "x":5.75, "y":4},
+        {"label":"H", "x":6.75, "y":4},
+        {"label":"J", "x":7.75, "y":4},
+        {"label":"K", "x":8.75, "y":4},
+        {"label":"L", "x":9.75, "y":4},
+        {"label":";", "x":10.75, "y":4},
+        {"label":"'", "x":11.75, "y":4},
+        {"label":"Enter", "x":12.75, "y":4, "w":2.25},
+        {"label":"4", "x":18.5, "y":4},
+        {"label":"5", "x":19.5, "y":4},
+        {"label":"6", "x":20.5, "y":4},
+        {"label":"+", "x":21.5, "y":3, "h":2},
+        {"label":"Shift", "x":0, "y":5, "w":2.25},
+        {"label":"Z", "x":2.25, "y":5},
+        {"label":"X", "x":3.25, "y":5},
+        {"label":"C", "x":4.25, "y":5},
+        {"label":"V", "x":5.25, "y":5},
+        {"label":"B", "x":6.25, "y":5},
+        {"label":"N", "x":7.25, "y":5},
+        {"label":"M", "x":8.25, "y":5},
+        {"label":",", "x":9.25, "y":5},
+        {"label":".", "x":10.25, "y":5},
+        {"label":"/", "x":11.25, "y":5},
+        {"label":"Shift", "x":12.25, "y":5, "w":2.75},
+        {"label":"Up", "x":16.25, "y":5},
+        {"label":"1", "x":18.5, "y":5},
+        {"label":"2", "x":19.5, "y":5},
+        {"label":"3", "x":20.5, "y":5},
+        {"label":"Ctrl", "x":0, "y":6, "w":1.5},
+        {"label":"Alt", "x":2.5, "y":6, "w":1.5},
+        {"label":"Space", "x":4, "y":6, "w":7},
+        {"label":"Alt", "x":11, "y":6, "w":1.5},
+        {"label":"Ctrl", "x":13.5, "y":6, "w":1.5},
+        {"label":"Left", "x":15.25, "y":6},
+        {"label":"Down", "x":16.25, "y":6},
+        {"label":"Right", "x":17.25, "y":6},
+        {"label":"0", "x":18.5, "y":6, "w":2},
+        {"label":".", "x":20.5, "y":6},
+        {"label":"Enter", "x":21.5, "y":5, "h":2}
+      ]
+    }
+  }
+}

keyboards/converter/ibm_terminal/keymaps/default/config.h

@@ -1,6 +1,3 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
-#include "../../config.h"
-
-#endif
+// place overrides here

keyboards/converter/ibm_terminal/keymaps/default/keymap.c

@@ -15,18 +15,12 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include <stdint.h>
-#include <stdbool.h>
-#include "keycode.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "ibm_terminal.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     // Layer 0
 
-    KEYMAP(
+    LAYOUT(
                         KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24,
                         KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12,
 
@@ -56,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `----'    `---------------------------------------'    `----' `-----------' `---------------'
      */
 /*
-    KEYMAP_101(
+    LAYOUT_101(
      KC_ESC,       KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,        KC_PSCR,KC_SLCK, KC_BRK,
 
      KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,KC_BSPC,      KC_INS,KC_HOME,KC_PGUP,     KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS,

keyboards/converter/ibm_terminal/keymaps/priyadi/config.h

@@ -1,6 +1,3 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
-#include "../../config.h"
-
-#endif
+// place overrides here

keyboards/converter/ibm_terminal/keymaps/priyadi/keymap.c

@@ -15,17 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "keycode.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "ibm_terminal.h"
-#include "action_layer.h"
-
-// Fillers to make layering clearer
-
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
+#include QMK_KEYBOARD_H
 
 enum layers {
   QWE, // qwerty
@@ -159,7 +149,7 @@ const uint32_t PROGMEM unicode_map[] = {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* qwerty */
-    [QWE] = KEYMAP(
+    [QWE] = LAYOUT(
                                    KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_PSCR, KC_SLCK, KC_PAUS,
                                    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
 
@@ -171,7 +161,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     /* colemak */
-    [COL] = KEYMAP(
+    [COL] = LAYOUT(
                                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
                                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
 
@@ -183,7 +173,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     /* workman */
-    [WOR] = KEYMAP(
+    [WOR] = LAYOUT(
                                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
                                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
 
@@ -195,7 +185,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     /* dvorak */
-    [DVO] = KEYMAP(
+    [DVO] = LAYOUT(
                                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
                                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
 
@@ -207,7 +197,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     /* system */
-    [SYS] = KEYMAP(
+    [SYS] = LAYOUT(
                                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
                                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
 
@@ -219,7 +209,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     /* mouse keys */
-    [MOU] = KEYMAP(
+    [MOU] = LAYOUT(
                                    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
                                    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
 
@@ -231,7 +221,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     /* emoji */
-    [EMO] = KEYMAP(
+    [EMO] = LAYOUT(
                                    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
                                    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
 
@@ -243,7 +233,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     /*
-    [XXX] = KEYMAP(
+    [XXX] = LAYOUT(
                                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
                                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
 

keyboards/converter/ibm_terminal/readme.md

@@ -0,0 +1,39 @@
+# Keyboard converter for IBM terminal keyboard
+
+This is a port of TMK's converter/terminal_usb to QMK.
+
+It supports PS/2 Scan Code Set 3 and runs on USB AVR chips such like PJRC Teensy.
+I tested the converter on ATMega32U4 with 1392595(102keys) and 6110345(122keys).
+
+Source code: https://github.com/qmk/qmk_firmware.git  
+Article: http://geekhack.org/index.php?topic=27272.0
+
+
+## Connection
+
+Keyboard | ATMega32U4
+:------- | :---------
+Data     |  PD2
+Clock    |  PD5
+
+And VCC and GND, of course. See Resource section for keyboard connector pin assign.
+
+
+## Build
+
+```
+git clone https://github.com/qmk/qmk_firmware.git
+cd qmk_firmware
+make converter/ibm_terminal:default
+```
+
+## Resource
+
+- Soarer's Converter: http://geekhack.org/index.php?topic=17458.0
+- 102keys(1392595): http://geekhack.org/index.php?topic=10737.0
+- 122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html
+- KbdBabel: http://www.kbdbabel.org/
+- RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png
+- DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png
+- WinAVR: http://winavr.sourceforge.net/
+

keyboards/converter/m0110_usb/README.md

@@ -1,19 +1,19 @@
-M0110(A) keyboard converter
-======================================
+# M0110(A) keyboard converter
+
 This is a port of the original M0110 converter from TMK to QMK. The original converter was designed to work with **ATmega32U2** and **ATmega32U4** based microcontrollers to convert Apple M0110/M0110A keyboards and M0120 numpads to USB. This port has been tested to be compatible with the [**Adafruit Feather 32U4 BLE**](https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le).
 
 
-### Enabling Bluetooth for the Adafruit Feather 32U4 BLE
-----------------------------------------------------
+## Enabling Bluetooth for the Adafruit Feather 32U4 BLE
+
 Simply add `BLUETOOTH = AdafruitBLE` to your `rules.mk` file. This enables code specifically for the Adafruit Feather 32U4 BLE. If enabled, the device will use the `PRODUCT` and `DESCRIPTION` values from `config.h` for the device name displayed by the Feather on host devices. You can simply change these values to change the device name.
 
 
-### Pins
-----
+## Pins
+
 This port utilizes the same pins that the TMK converter used. `PD1` is used for `CLOCK` and `PD0` is used for the `DATA` from the keyboard. These pins can be changed in `config.h`.
 
 
-### Other important hardware notes from the original TMK converter Readme:
+## Other important hardware notes from the original TMK converter Readme:
 >### Hardware
 >--------
 >You can buy preassembled [TMK converter] or make yourown with AVR dev board like PJRC [Teensy].
@@ -45,7 +45,7 @@ This port utilizes the same pins that the TMK converter used. `PD1` is used for
 [**View the original TMK converter Repository**](https://github.com/tmk/tmk_keyboard/tree/master/converter/m0110_usb)
 
 
-### QMK Port Changelog
----------
+## QMK Port Changelog
+
 - 2018/08/01 - Original Release
 

keyboards/converter/m0110_usb/info.json

@@ -0,0 +1,172 @@
+{
+  "keyboard_name": "M0110(A) keyboard converter",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 19.25,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_ansi": {
+      "key_count": 78,
+      "layout": [
+        {"label":"`", "x":0, "y":0},
+        {"label":"1", "x":1, "y":0},
+        {"label":"2", "x":2, "y":0},
+        {"label":"3", "x":3, "y":0},
+        {"label":"4", "x":4, "y":0},
+        {"label":"5", "x":5, "y":0},
+        {"label":"6", "x":6, "y":0},
+        {"label":"7", "x":7, "y":0},
+        {"label":"8", "x":8, "y":0},
+        {"label":"9", "x":9, "y":0},
+        {"label":"0", "x":10, "y":0},
+        {"label":"-", "x":11, "y":0},
+        {"label":"=", "x":12, "y":0},
+        {"label":"Backspace", "x":13, "y":0, "w":1.5},
+        {"label":"Num Lock", "x":15.25, "y":0},
+        {"label":"=", "x":16.25, "y":0},
+        {"label":"/", "x":17.25, "y":0},
+        {"label":"*", "x":18.25, "y":0},
+        {"label":"Tab", "x":0, "y":1, "w":1.5},
+        {"label":"Q", "x":1.5, "y":1},
+        {"label":"W", "x":2.5, "y":1},
+        {"label":"E", "x":3.5, "y":1},
+        {"label":"R", "x":4.5, "y":1},
+        {"label":"T", "x":5.5, "y":1},
+        {"label":"Y", "x":6.5, "y":1},
+        {"label":"U", "x":7.5, "y":1},
+        {"label":"I", "x":8.5, "y":1},
+        {"label":"O", "x":9.5, "y":1},
+        {"label":"P", "x":10.5, "y":1},
+        {"label":"[", "x":11.5, "y":1},
+        {"label":"]", "x":12.5, "y":1},
+        {"label":"7", "x":15.25, "y":1},
+        {"label":"8", "x":16.25, "y":1},
+        {"label":"9", "x":17.25, "y":1},
+        {"label":"-", "x":18.25, "y":1},
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+        {"label":"A", "x":1.75, "y":2},
+        {"label":"S", "x":2.75, "y":2},
+        {"label":"D", "x":3.75, "y":2},
+        {"label":"F", "x":4.75, "y":2},
+        {"label":"G", "x":5.75, "y":2},
+        {"label":"H", "x":6.75, "y":2},
+        {"label":"J", "x":7.75, "y":2},
+        {"label":"K", "x":8.75, "y":2},
+        {"label":"L", "x":9.75, "y":2},
+        {"label":";", "x":10.75, "y":2},
+        {"label":"'", "x":11.75, "y":2},
+        {"label":"Enter", "x":12.75, "y":2, "w":1.75},
+        {"label":"4", "x":15.25, "y":2},
+        {"label":"5", "x":16.25, "y":2},
+        {"label":"6", "x":17.25, "y":2},
+        {"label":"+", "x":18.25, "y":2},
+        {"label":"Shift", "x":0, "y":3, "w":2.25},
+        {"label":"Z", "x":2.25, "y":3},
+        {"label":"X", "x":3.25, "y":3},
+        {"label":"C", "x":4.25, "y":3},
+        {"label":"V", "x":5.25, "y":3},
+        {"label":"B", "x":6.25, "y":3},
+        {"label":"N", "x":7.25, "y":3},
+        {"label":"M", "x":8.25, "y":3},
+        {"label":",", "x":9.25, "y":3},
+        {"label":".", "x":10.25, "y":3},
+        {"label":"/", "x":11.25, "y":3},
+        {"label":"Up", "x":13.5, "y":3},
+        {"label":"1", "x":15.25, "y":3},
+        {"label":"2", "x":16.25, "y":3},
+        {"label":"3", "x":17.25, "y":3},
+        {"label":"Enter", "x":18.25, "y":3, "h":2},
+        {"label":"Alt", "x":0, "y":4, "w":1.5},
+        {"label":"GUI", "x":1.5, "y":4, "w":2},
+        {"label":"Space", "x":3.5, "y":4, "w":6},
+        {"label":"MO(1)", "x":9.5, "y":4},
+        {"label":"\\", "x":10.5, "y":4},
+        {"label":"Left", "x":11.5, "y":4},
+        {"label":"Right", "x":12.5, "y":4},
+        {"label":"Down", "x":13.5, "y":4},
+        {"label":"0", "x":15.25, "y":4, "w":2},
+        {"label":".", "x":17.25, "y":4}
+      ]
+    },
+    "LAYOUT_iso": {
+      "key_count": 75,
+      "layout": [
+        {"label":"`", "x":0, "y":0},
+        {"label":"1", "x":1, "y":0},
+        {"label":"2", "x":2, "y":0},
+        {"label":"3", "x":3, "y":0},
+        {"label":"4", "x":4, "y":0},
+        {"label":"5", "x":5, "y":0},
+        {"label":"6", "x":6, "y":0},
+        {"label":"7", "x":7, "y":0},
+        {"label":"8", "x":8, "y":0},
+        {"label":"9", "x":9, "y":0},
+        {"label":"0", "x":10, "y":0},
+        {"label":"-", "x":11, "y":0},
+        {"label":"=", "x":12, "y":0},
+        {"label":"Backspace", "x":13, "y":0, "w":1.5},
+        {"label":"Num Lock", "x":15.25, "y":0},
+        {"label":"=", "x":16.25, "y":0},
+        {"label":"/", "x":17.25, "y":0},
+        {"label":"*", "x":18.25, "y":0},
+        {"label":"Tab", "x":0, "y":1, "w":1.5},
+        {"label":"Q", "x":1.5, "y":1},
+        {"label":"W", "x":2.5, "y":1},
+        {"label":"E", "x":3.5, "y":1},
+        {"label":"R", "x":4.5, "y":1},
+        {"label":"T", "x":5.5, "y":1},
+        {"label":"Y", "x":6.5, "y":1},
+        {"label":"U", "x":7.5, "y":1},
+        {"label":"I", "x":8.5, "y":1},
+        {"label":"O", "x":9.5, "y":1},
+        {"label":"P", "x":10.5, "y":1},
+        {"label":"[", "x":11.5, "y":1},
+        {"label":"]", "x":12.5, "y":1},
+        {"label":"Return", "x":13.75, "y":1, "w":0.75, "h":2},
+        {"label":"7", "x":15.25, "y":1},
+        {"label":"8", "x":16.25, "y":1},
+        {"label":"9", "x":17.25, "y":1},
+        {"label":"-", "x":18.25, "y":1},
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+        {"label":"A", "x":1.75, "y":2},
+        {"label":"S", "x":2.75, "y":2},
+        {"label":"D", "x":3.75, "y":2},
+        {"label":"F", "x":4.75, "y":2},
+        {"label":"G", "x":5.75, "y":2},
+        {"label":"H", "x":6.75, "y":2},
+        {"label":"J", "x":7.75, "y":2},
+        {"label":"K", "x":8.75, "y":2},
+        {"label":"L", "x":9.75, "y":2},
+        {"label":";", "x":10.75, "y":2},
+        {"label":"'", "x":11.75, "y":2},
+        {"label":"#", "x":12.75, "y":2},
+        {"label":"4", "x":15.25, "y":2},
+        {"label":"5", "x":16.25, "y":2},
+        {"label":"6", "x":17.25, "y":2},
+        {"label":"+", "x":18.25, "y":2},
+        {"label":"Shift", "x":0, "y":3, "w":1.25},
+        {"label":"\\", "x":1.25, "y":3},
+        {"label":"Z", "x":2.25, "y":3},
+        {"label":"X", "x":3.25, "y":3},
+        {"label":"C", "x":4.25, "y":3},
+        {"label":"V", "x":5.25, "y":3},
+        {"label":"B", "x":6.25, "y":3},
+        {"label":"N", "x":7.25, "y":3},
+        {"label":"M", "x":8.25, "y":3},
+        {"label":",", "x":9.25, "y":3},
+        {"label":".", "x":10.25, "y":3},
+        {"label":"/", "x":11.25, "y":3},
+        {"label":"1", "x":15.25, "y":3},
+        {"label":"2", "x":16.25, "y":3},
+        {"label":"3", "x":17.25, "y":3},
+        {"label":"Enter", "x":18.25, "y":3, "h":2},
+        {"label":"Option", "x":1, "y":4},
+        {"label":"GUI", "x":2, "y":4, "w":1.5},
+        {"label":"Space", "x":3.5, "y":4, "w":7.5},
+        {"label":"Enter", "x":11, "y":4, "w":1.5},
+        {"label":"0", "x":15.25, "y":4, "w":2},
+        {"label":".", "x":17.25, "y":4}
+      ]
+    }
+  }
+}

keyboards/crkbd/crkbd.c

@@ -1 +1,6 @@
 #include "crkbd.h"
+#include "ssd1306.h" 
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	return process_record_gfx(keycode,record) && process_record_user(keycode, record);
+}

keyboards/crkbd/ssd1306.c

@@ -24,12 +24,17 @@ static const unsigned char font[] PROGMEM;
 //static uint16_t last_battery_update;
 //static uint32_t vbat;
 //#define BatteryUpdateInterval 10000 /* milliseconds */
-#define ScreenOffInterval 300000 /* milliseconds */
+
+// 'last_flush' is declared as uint16_t,
+// so this must be less than 65535 
+#define ScreenOffInterval 60000 /* milliseconds */
 #if DEBUG_TO_SCREEN
 static uint8_t displaying;
 #endif
 static uint16_t last_flush;
 
+static bool force_dirty = true;
+
 // Write command sequence.
 // Returns true on success.
 static inline bool _send_cmd1(uint8_t cmd) {
@@ -321,12 +326,19 @@ void iota_gfx_task_user(void) {
 void iota_gfx_task(void) {
   iota_gfx_task_user();
 
-  if (display.dirty) {
+  if (display.dirty|| force_dirty) {
     iota_gfx_flush();
+    force_dirty = false;
   }
 
   if (timer_elapsed(last_flush) > ScreenOffInterval) {
     iota_gfx_off();
   }
 }
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
+  force_dirty = true;
+  return true;
+}
+
 #endif

keyboards/crkbd/ssd1306.h

@@ -3,6 +3,7 @@
 #include <stdbool.h>
 #include <stdio.h>
 #include "pincontrol.h"
+#include "action.h"
 
 enum ssd1306_cmds {
   DisplayOff = 0xAE,
@@ -86,3 +87,5 @@ void matrix_write(struct CharacterMatrix *matrix, const char *data);
 void matrix_write_ln(struct CharacterMatrix *matrix, const char *data);
 void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
 void matrix_render(struct CharacterMatrix *matrix);
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record);

keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.c

@@ -0,0 +1,56 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+// Value to place in RTC backup register 10 for persistent bootloader mode
+#define RTC_BOOTLOADER_FLAG 0x424C
+
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  stm32_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+   //JTAG-DP Disabled and SW-DP Enabled
+   AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE;
+   //Set backup register DR10 to enter bootloader on reset
+   BKP->DR10 = RTC_BOOTLOADER_FLAG;
+}

keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.h

@@ -0,0 +1,166 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for a Generic STM32F103 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F103
+#define BOARD_NAME              "Generic STM32F103x board"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK            32768
+#define STM32_HSECLK            8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F103xB
+
+/*
+ * IO pins assignments
+ */
+
+/* on-board */
+
+#define GPIOA_LED               8
+#define GPIOD_OSC_IN            0
+#define GPIOD_OSC_OUT           1
+
+/* In case your board has a "USB enable" hardware
+   controlled by a pin, define it here. (It could be just
+   a 1.5k resistor connected to D+ line.)
+*/
+/*
+#define GPIOB_USB_DISC          10
+*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ *   0 - Analog input.
+ *   1 - Push Pull output 10MHz.
+ *   2 - Push Pull output 2MHz.
+ *   3 - Push Pull output 50MHz.
+ *   4 - Digital input.
+ *   5 - Open Drain output 10MHz.
+ *   6 - Open Drain output 2MHz.
+ *   7 - Open Drain output 50MHz.
+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ *   9 - Alternate Push Pull output 10MHz.
+ *   A - Alternate Push Pull output 2MHz.
+ *   B - Alternate Push Pull output 50MHz.
+ *   C - Reserved.
+ *   D - Alternate Open Drain output 10MHz.
+ *   E - Alternate Open Drain output 2MHz.
+ *   F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA2  - Alternate output  (USART2 TX).
+ * PA3  - Normal input      (USART2 RX).
+ * PA9  - Alternate output  (USART1 TX).
+ * PA10 - Normal input      (USART1 RX).
+ */
+#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
+#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
+#define VAL_GPIOAODR            0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB10    - Push Pull output  (USB switch).
+ */
+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
+#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
+#define VAL_GPIOBODR            0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC13    - Push Pull output  (LED).
+ */
+#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
+#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
+#define VAL_GPIOCODR            0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0  - Normal input (XTAL).
+ * PD1  - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
+#define VAL_GPIODODR            0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
+#define VAL_GPIOEODR            0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+/* The point is that most of the generic STM32F103* boards
+   have a 1.5k resistor connected on one end to the D+ line
+   and on the other end to some pin. Or even a slightly more
+   complicated "USB enable" circuit, controlled by a pin.
+   That should go here.
+
+   However on some boards (e.g. one that I have), there's no
+   such hardware. In which case it's better to not do anything.
+*/
+/*
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+/*
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */

keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103

keyboards/handwired/practice60/bootloader_defs.h

@@ -0,0 +1,10 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+
+// STM32F103* does NOT have an USB bootloader in ROM (only serial),
+//  so setting anything here does not make much sense
+// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/handwired/practice60/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/handwired/practice60/config.h

@@ -0,0 +1,74 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6464
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER QMK
+#define PRODUCT Practice 60
+#define DESCRIPTION Practice 60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0, C15, C14 }
+#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 1
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/handwired/practice60/halconf.h

@@ -0,0 +1,353 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/handwired/practice60/hsv2rgb.c

@@ -0,0 +1,80 @@
+/* hsv2rgb.c
+ * Integer only conversion functions between HSV and RGB
+ */
+
+#include "hsv2rgb.h"
+
+// TODO fix these buggy macros
+#define max(x,y) ((x>y) ? x:y)
+#define min(x,y) ((x>y) ? y:x)
+#define min3(x,y,z) (min(min(x,y),z))
+#define max3(x,y,z) (max(max(x,y),z))
+
+
+rgb_color hsv2rgb(hsv_color hsv)
+{
+  // From : http://qscribble.blogspot.fr/2008/06/integer-conversion-from-hsl-to-rgb.html
+  int h = hsv.h;
+  int s = hsv.s;
+  int v = hsv.v;
+  rgb_color rgb = {0, 0, 0};
+
+  if (v == 0)
+    return rgb;
+
+  // sextant = 0 .. 5
+  int sextant = (h*6)/256;
+  // f = 0 .. 42
+  int f = h - (sextant*256)/6;
+
+  int p = (v * (256 - s))/256;
+  int q = (v * (256*43 - s*f))/(256*43);
+  int t = (v * (256*43 - s*(43-f)))/(256*43);
+
+  // Corrige les erreurs dues aux arrondis
+  p = max(min(p, 255), 0);
+  q = max(min(q, 255), 0);
+  t = max(min(t, 255), 0);
+
+  switch(sextant){
+  case 0: rgb.r = v; rgb.g = t; rgb.b = p; break;
+  case 1: rgb.r = q; rgb.g = v; rgb.b = p; break;
+  case 2: rgb.r = p; rgb.g = v; rgb.b = t; break;
+  case 3: rgb.r = p; rgb.g = q; rgb.b = v; break;
+  case 4: rgb.r = t; rgb.g = p; rgb.b = v; break;
+  default:rgb.r = v; rgb.g = p; rgb.b = q; break;
+  }
+  return rgb;
+}
+
+
+hsv_color rgb2hsv(rgb_color rgb)
+{
+  // From : http://www.ruinelli.ch/rgb-to-hsv
+  hsv_color hsv = {0, 0, 0};
+  int min, max, delta;
+
+  min = min3(rgb.r, rgb.g, rgb.b);
+  max = max3(rgb.r, rgb.g, rgb.b);
+
+  if(max==0) {
+    hsv.h = 0;
+    hsv.s = 0;
+    hsv.v = 0;
+    return hsv;
+  }
+
+  hsv.v = max;
+  delta = max - min;
+
+  hsv.s = (delta)*255 / max;
+
+  if(rgb.r == max)
+    hsv.h = (rgb.g - rgb.b)*42/delta;        // between yellow & magenta
+  else if(rgb.g == max)
+    hsv.h = 120 + (rgb.b - rgb.r)*42/delta;    // between cyan & yellow
+  else
+    hsv.h = 240 + (rgb.r - rgb.g)*42/delta;    // between magenta & cyan
+
+  return hsv;
+}

keyboards/handwired/practice60/hsv2rgb.h

@@ -0,0 +1,23 @@
+/* hsv2rgb.h
+ * Convert Hue Saturation Value to Red Green Blue
+ *
+ * Programme de convertion d'une information HSV en RGB
+ */
+#ifndef HSV2RGB_H
+#define HSV2RGB_H
+
+typedef struct {
+  unsigned char h;
+  unsigned char s;
+  unsigned char v;
+} hsv_color;
+
+typedef struct {
+  unsigned char r;
+  unsigned char g;
+  unsigned char b;
+} rgb_color;
+
+rgb_color hsv2rgb(hsv_color hsv);
+
+#endif

keyboards/handwired/practice60/keymaps/default/keymap.c

@@ -0,0 +1,48 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_60_ansi(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    MT(MOD_LSFT, KC_Y),    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+    KC_LCTL , KC_LGUI , KC_LALT ,                      KC_SPC                    , KC_RALT , KC_RGUI , MO(_FN1)  , KC_RCTL
+  ),
+
+  [_FN1] = LAYOUT_60_ansi(
+    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC, \
+    RGB_TOG, RGB_MOD, KC_UP,   _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
+    BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    KC_GRV, _______, _______, _______, _______,          _______, _______, _______
+  )
+};

keyboards/handwired/practice60/ld/MKL26Z64.ld

@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
+ *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * KL26Z64 memory setup.
+ */
+MEMORY
+{
+  flash0   : org = 0x00000000, len = 0x100
+  flash1   : org = 0x00000400, len = 0x10
+  flash2   : org = 0x00000410, len = 62k - 0x410
+  flash3   : org = 0x0000F800, len = 2k
+  flash4   : org = 0x00000000, len = 0
+  flash5   : org = 0x00000000, len = 0
+  flash6   : org = 0x00000000, len = 0
+  flash7   : org = 0x00000000, len = 0
+  ram0     : org = 0x1FFFF800, len = 8k
+  ram1     : org = 0x00000000, len = 0
+  ram2     : org = 0x00000000, len = 0
+  ram3     : org = 0x00000000, len = 0
+  ram4     : org = 0x00000000, len = 0
+  ram5     : org = 0x00000000, len = 0
+  ram6     : org = 0x00000000, len = 0
+  ram7     : org = 0x00000000, len = 0
+}
+
+/* Flash region for the configuration bytes.*/
+SECTIONS
+{
+  .cfmprotect : ALIGN(4) SUBALIGN(4)
+  {
+    KEEP(*(.cfmconfig))
+  } > flash1
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash2);
+REGION_ALIAS("XTORS_FLASH_LMA", flash2);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash2);
+REGION_ALIAS("TEXT_FLASH_LMA", flash2);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash2);
+REGION_ALIAS("RODATA_FLASH_LMA", flash2);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash2);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash2);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+__eeprom_workarea_start__ = ORIGIN(flash3);
+__eeprom_workarea_size__  = LENGTH(flash3);
+__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld

keyboards/handwired/practice60/ld/STM32F103x8_stm32duino_bootloader.ld

@@ -0,0 +1,88 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * ST32F103xB memory setup for use with the maplemini bootloader.
+ * You will have to
+ * 	#define CORTEX_VTOR_INIT 0x5000
+ * in your projects chconf.h
+ */
+MEMORY
+{
+    flash0  : org = 0x08002000, len = 64k - 0x2000
+    flash1  : org = 0x00000000, len = 0
+    flash2  : org = 0x00000000, len = 0
+    flash3  : org = 0x00000000, len = 0
+    flash4  : org = 0x00000000, len = 0
+    flash5  : org = 0x00000000, len = 0
+    flash6  : org = 0x00000000, len = 0
+    flash7  : org = 0x00000000, len = 0
+    ram0    : org = 0x20000000, len = 20k
+    ram1    : org = 0x00000000, len = 0
+    ram2    : org = 0x00000000, len = 0
+    ram3    : org = 0x00000000, len = 0
+    ram4    : org = 0x00000000, len = 0
+    ram5    : org = 0x00000000, len = 0
+    ram6    : org = 0x00000000, len = 0
+    ram7    : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld

keyboards/handwired/practice60/led.c

@@ -0,0 +1,51 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+#include "backlight.h"
+#include "led.h"
+#include "printf.h"
+
+void backlight_init_ports(void) {
+    printf("backlight_init_ports()\n");
+    #ifdef BACKLIGHT_ENABLE
+    palSetPadMode(GPIOA, 8, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(GPIOA, 8);
+    #endif
+}
+
+void backlight_set(uint8_t level) {
+    printf("backlight_set(%d)\n", level);
+    #ifdef BACKLIGHT_ENABLE
+    if (level == 0) {
+        // Turn backlight off
+        palSetPad(GPIOA, 8);
+    } else {
+        // Turn backlight on
+        palClearPad(GPIOA, 8);
+    }
+    #endif
+}
+
+void led_set(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        palClearPad(GPIOC, 13);
+    } else {
+    	palSetPad(GPIOC, 13);
+    }
+}

keyboards/handwired/practice60/mcuconf.h

@@ -0,0 +1,209 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+#endif /* _MCUCONF_H_ */

keyboards/handwired/practice60/practice60.c

@@ -0,0 +1,32 @@
+
+#include "practice60.h"
+
+#include "ch.h"
+#include "hal.h"
+
+#include "underglow.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+
+/* generic STM32F103C8T6 board */
+#ifdef BOARD_GENERIC_STM32_F103
+#define LED_ON()    do { palClearPad(GPIOC, 13) ;} while (0)
+#define LED_OFF()   do { palSetPad(GPIOC, 13); } while (0)
+#define LED_TGL()   do { palTogglePad(GPIOC, 13); } while (0)
+#endif
+
+void matrix_init_kb(void){
+      /* MOSI pin*/
+    palSetPadMode(GPIOB, 15, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
+
+    LED_ON();
+    palSetPad(GPIOA, 8);
+    wait_ms(500);
+    palClearPad(GPIOA, 8);
+    LED_OFF();
+
+    leds_init();
+
+
+}

keyboards/handwired/practice60/practice60.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_60_ansi( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \
+ K40, K41, K42, K43, K49, K4A, K4B, K4C \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B }, \
+ { K40, K41, K42, K43, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C }, \
+}
+

keyboards/handwired/practice60/readme.md

@@ -0,0 +1,3 @@
+# Practice 60
+
+Blue Pill STM32F103C8T6 based 60% board

keyboards/handwired/practice60/rules.mk

@@ -0,0 +1,56 @@
+# project specific files
+SRC =	led.c \
+		  underglow.c \
+		  hsv2rgb.c
+
+# GENERIC STM32F103C8T6 board - stm32duino bootloader
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
+MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+BOARD = GENERIC_STM32_F103
+
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes
+
+LAYOUTS = 60_ansi
+
+DEFAULT_FOLDER = handwired/practice60

keyboards/handwired/practice60/underglow.c

@@ -0,0 +1,157 @@
+#include "ch.h"
+#include "hal.h"
+
+#include "hsv2rgb.h"
+#include "underglow.h"
+
+#define BYTES_FOR_LED_BYTE 4
+#define NB_COLORS 3
+#define BYTES_FOR_LED BYTES_FOR_LED_BYTE*NB_COLORS
+#define DATA_SIZE BYTES_FOR_LED*NB_LEDS
+#define RESET_SIZE 200
+#define PREAMBLE_SIZE 4
+
+// Define the spi your LEDs are plugged to here
+#define LEDS_SPI SPID2
+// Define the number of LEDs you wish to control in your LED strip
+#define NB_LEDS 8
+
+#define LED_SPIRAL 1
+
+static uint8_t txbuf[PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE];
+static uint8_t get_protocol_eq(uint8_t data, int pos);
+
+/*
+ * This lib is meant to be used asynchronously, thus the colors contained in
+ * the txbuf will be sent in loop, so that the colors are always the ones you
+ * put in the table (the user thus have less to worry about)
+ *
+ * Since the data are sent via DMA, and the call to spiSend is a blocking one,
+ * the processor ressources are not used to much, if you see your program being
+ * too slow, simply add a:
+ * chThdSleepMilliseconds(x);
+ * after the spiSend, where you increment x untill you are satisfied with your
+ * program speed, another trick may be to lower this thread priority : your call
+ */
+static THD_WORKING_AREA(LEDS_THREAD_WA, 128);
+static THD_FUNCTION(ledsThread, arg) {
+  (void) arg;
+  while(1){
+    spiSend(&LEDS_SPI, PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE, txbuf);
+  }
+}
+
+#if LED_SPIRAL
+/*
+ * 'Led spiral' is a simple demo in which we put all the leds to the same
+ * color, where this color does all the hsv circle in loop.
+ * If you want to launch the thread that will chage the led colors to the
+ * appropriate value, simply set LED_SPIRAL to 1.
+ */
+static THD_WORKING_AREA(HSVTRANS_WA, 128);
+static THD_FUNCTION(hsv_transThread, arg){
+  (void) arg;
+  hsv_color color = {0, 255, 127};
+  while(1){
+    color.h += 1;
+    color.h %= 256;
+    set_leds_color_hsv(color);
+    chThdSleepMilliseconds(50);
+  }
+}
+#endif
+
+static const SPIConfig spicfg = {
+  NULL,
+  GPIOB,
+  15,
+  SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us
+};
+
+/*
+ * Function used to initialize the driver.
+ *
+ * Starts by shutting off all the LEDs.
+ * Then gets access on the LED_SPI driver.
+ * May eventually launch an animation on the LEDs (e.g. a thread setting the
+ * txbuff values)
+ */
+void leds_init(void){
+  for(int i = 0; i < RESET_SIZE; i++)
+    txbuf[DATA_SIZE+i] = 0x00;
+  for (int i=0; i<PREAMBLE_SIZE; i++)
+    txbuf[i] = 0x00;
+  spiAcquireBus(&LEDS_SPI);              /* Acquire ownership of the bus.    */
+  spiStart(&LEDS_SPI, &spicfg);          /* Setup transfer parameters.       */
+  spiSelect(&LEDS_SPI);                  /* Slave Select assertion.          */
+  chThdCreateStatic(LEDS_THREAD_WA, sizeof(LEDS_THREAD_WA),NORMALPRIO, ledsThread, NULL);
+#if LED_SPIRAL
+  chThdCreateStatic(HSVTRANS_WA, sizeof(HSVTRANS_WA),
+      NORMALPRIO, hsv_transThread, NULL);
+#endif
+}
+
+/*
+ * As the trick here is to use the SPI to send a huge pattern of 0 and 1 to
+ * the ws2812b protocol, we use this helper function to translate bytes into
+ * 0s and 1s for the LED (with the appropriate timing).
+ */
+static uint8_t get_protocol_eq(uint8_t data, int pos){
+  uint8_t eq = 0;
+  if (data & (1 << (2*(3-pos))))
+    eq = 0b1110;
+  else
+    eq = 0b1000;
+  if (data & (2 << (2*(3-pos))))
+    eq += 0b11100000;
+  else
+    eq += 0b10000000;
+  return eq;
+}
+
+/*
+ * If you want to set a LED's color in the HSV color space, simply call this
+ * function with a hsv_color containing the desired color and the index of the
+ * led on the LED strip (starting from 0, the first one being the closest the
+ * first plugged to the board)
+ *
+ * Only set the color of the LEDs through the functions given by this API
+ * (unless you really know what you are doing)
+ */
+void set_led_color_hsv(hsv_color color, int pos){
+  set_led_color_rgb(hsv2rgb(color), pos);
+}
+
+/*
+ * If you want to set a LED's color in the RGB color space, simply call this
+ * function with a hsv_color containing the desired color and the index of the
+ * led on the LED strip (starting from 0, the first one being the closest the
+ * first plugged to the board)
+ *
+ * Only set the color of the LEDs through the functions given by this API
+ * (unless you really know what you are doing)
+ */
+void set_led_color_rgb(rgb_color color, int pos){
+  for(int j = 0; j < 4; j++)
+    txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + j] = get_protocol_eq(color.g, j);
+  for(int j = 0; j < 4; j++)
+    txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE+j] = get_protocol_eq(color.r, j);
+  for(int j = 0; j < 4; j++)
+    txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE*2+j] = get_protocol_eq(color.b, j);
+}
+
+/*
+ * Same as the two above, but sets all the LEDs in the LED strip (HSV)
+ */
+void set_leds_color_hsv(hsv_color color){
+  for(int i = 0; i < NB_LEDS; i++)
+    set_led_color_hsv(color, i);
+}
+
+/*
+ * Same as the two above, but sets all the LEDs in the LED strip (RGB)
+ */
+void set_leds_color_rgb(rgb_color color){
+  for(int i = 0; i < NB_LEDS; i++)
+    set_led_color_rgb(color, i);
+}

keyboards/handwired/practice60/underglow.h

@@ -0,0 +1,10 @@
+#pragma once
+
+#include "hsv2rgb.h"
+
+void set_leds_color_hsv(hsv_color color);
+void set_leds_color_rgb(rgb_color color);
+void set_led_color_hsv(hsv_color color, int pos);
+void set_led_color_rgb(rgb_color color, int pos);
+
+void leds_init(void);

keyboards/helix/pico/pico.c

@@ -2,6 +2,12 @@
 
 
 #ifdef SSD1306OLED
+#include "ssd1306.h"
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	return process_record_gfx(keycode,record) && process_record_user(keycode, record);
+}
+
 void led_set_kb(uint8_t usb_led) {
     // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
     //led_set_user(usb_led);

keyboards/helix/rev1/rev1.c

@@ -2,6 +2,12 @@
 
 
 #ifdef SSD1306OLED
+#include "ssd1306.h"
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	return process_record_gfx(keycode,record) && process_record_user(keycode, record);
+}
+
 void led_set_kb(uint8_t usb_led) {
     // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
     led_set_user(usb_led);

keyboards/helix/rev2/rev2.c

@@ -2,6 +2,12 @@
 
 
 #ifdef SSD1306OLED
+#include "ssd1306.h"
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	return process_record_gfx(keycode,record) && process_record_user(keycode, record);
+}
+
 void led_set_kb(uint8_t usb_led) {
     // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
     //led_set_user(usb_led);

keyboards/helix/ssd1306.c

@@ -1,3 +1,4 @@
+
 #ifdef SSD1306OLED
 
 #include "ssd1306.h"
@@ -27,12 +28,17 @@
 //static uint16_t last_battery_update;
 //static uint32_t vbat;
 //#define BatteryUpdateInterval 10000 /* milliseconds */
-#define ScreenOffInterval 300000 /* milliseconds */
+
+// 'last_flush' is declared as uint16_t,
+// so this must be less than 65535 
+#define ScreenOffInterval 60000 /* milliseconds */
 #if DEBUG_TO_SCREEN
 static uint8_t displaying;
 #endif
 static uint16_t last_flush;
 
+static bool force_dirty = true;
+
 // Write command sequence.
 // Returns true on success.
 static inline bool _send_cmd1(uint8_t cmd) {
@@ -318,12 +324,19 @@ void iota_gfx_task_user(void) {
 void iota_gfx_task(void) {
   iota_gfx_task_user();
 
-  if (display.dirty) {
+  if (display.dirty|| force_dirty) {
     iota_gfx_flush();
+    force_dirty = false;
   }
 
   if (timer_elapsed(last_flush) > ScreenOffInterval) {
     iota_gfx_off();
   }
 }
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
+  force_dirty = true;
+  return true;
+}
+
 #endif

keyboards/helix/ssd1306.h

@@ -4,6 +4,7 @@
 #include <stdbool.h>
 #include <stdio.h>
 #include "pincontrol.h"
+#include "action.h"
 
 enum ssd1306_cmds {
   DisplayOff = 0xAE,
@@ -87,6 +88,6 @@ void matrix_write(struct CharacterMatrix *matrix, const char *data);
 void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
 void matrix_render(struct CharacterMatrix *matrix);
 
-
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record);
 
 #endif

keyboards/kbd67/config.h

@@ -0,0 +1,240 @@
+/*
+Copyright 2018 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    kbdfans
+#define PRODUCT         kbd67
+#define DESCRIPTION     65% Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 20
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 180 /* The maximum brightness level */
+  // #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+  // #define RGBLIGHT_EFFECT_BREATHING
+  // #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+  // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+  // #define RGBLIGHT_EFFECT_SNAKE
+  // #define RGBLIGHT_EFFECT_KNIGHT
+  // #define RGBLIGHT_EFFECT_CHRISTMAS
+  // #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+  // #define RGBLIGHT_EFFECT_RGB_TEST
+  // #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/kbd67/info.json

@@ -0,0 +1,16 @@
+{
+  "keyboard_name": "kbd67",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 16,
+  "height": 5,
+  "layouts": {
+      "LAYOUT_all": {
+          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+      },
+
+      "LAYOUT_65_ansi": {
+          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+      }
+  }
+}

keyboards/kbd67/kbd67.c

@@ -0,0 +1,51 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "kbd67.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 2);
+		PORTB &= ~(1 << 2);
+	} else {
+		DDRB &= ~(1 << 2);
+		PORTB &= ~(1 << 2);
+	}
+
+	led_set_user(usb_led);
+}

keyboards/kbd67/kbd67.h

@@ -0,0 +1,59 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef KBD67_H
+#define KBD67_H
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
+    K10,      K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \
+    K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2F, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, K3F, \
+    K40, K41,      K43, K44,      K46,      K48,      K4A, K4B, K4C, K4D, K4E, K4F  \
+) \
+{ \
+    { K00, K01,   K02,   K03, K04, K05,   K06, K07,   K08, K09,   K0A, K0B, K0C,   K0D, K0E,   K0F }, \
+    { K10, KC_NO, K12,   K13, K14, K15,   K16, K17,   K18, K19,   K1A, K1B, K1C,   K1D, K1E,   K1F }, \
+    { K20, KC_NO, K22,   K23, K24, K25,   K26, K27,   K28, K29,   K2A, K2B, K2C,   K2D, KC_NO, K2F }, \
+    { K30, K31,   K32,   K33, K34, K35,   K36, K37,   K38, K39,   K3A, K3B, KC_NO, K3D, K3E,   K3F }, \
+    { K40, K41,   KC_NO, K43, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C,   K4D, K4E,   K4F }, \
+}
+
+#define LAYOUT_65_ansi( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,      K0E, K0F, \
+    K10,      K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \
+    K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2F, \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, K3F, \
+    K40, K41,      K43,           K46,                K4A, K4B, K4C, K4D, K4E, K4F  \
+) \
+{ \
+    { K00, K01,   K02,   K03, K04,   K05,   K06, K07,   K08,   K09,   K0A, K0B, K0C,   KC_NO, K0E,   K0F }, \
+    { K10, KC_NO, K12,   K13, K14,   K15,   K16, K17,   K18,   K19,   K1A, K1B, K1C,   K1D,   K1E,   K1F }, \
+    { K20, KC_NO, K22,   K23, K24,   K25,   K26, K27,   K28,   K29,   K2A, K2B, K2C,   K2D,   KC_NO, K2F }, \
+    { K30, KC_NO, K32,   K33, K34,   K35,   K36, K37,   K38,   K39,   K3A, K3B, KC_NO, K3D,   K3E,   K3F }, \
+    { K40, K41,   KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C,   K4D,   K4E,   K4F }, \
+}
+
+#endif

keyboards/kbd67/keymaps/default/config.h

@@ -1,4 +1,4 @@
-/* Copyright 2018 Jason Williams (Wilba)
+/* Copyright 2018 MechMerlin
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,22 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #pragma once
 
-#if RGB_BACKLIGHT_ENABLED
-#else
-#error rgb_backlight.h included when RGB_BACKLIGHT_ENABLED == 0
-#endif // RGB_BACKLIGHT_ENABLED
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#include "quantum/color.h"
-
-void backlight_init_drivers(void);
-void backlight_update_pwm_buffers(void);
-void backlight_timer_init(void);
-void backlight_timer_enable(void);
-void backlight_timer_disable(void);
-void backlight_set_suspend_state(bool state);
-
+// place overrides here

keyboards/kbd67/keymaps/default/keymap.c

@@ -0,0 +1,99 @@
+/* Copyright 2018 'mechmerlin'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap (Base Layer) Default Layer
+   * ,----------------------------------------------------------------.
+   * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |~ ` |
+   * |----------------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |Del |
+   * |----------------------------------------------------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgUp|
+   * |----------------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|PgDn|
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |        Space          |Alt| FN|Ctrl|Lef|Dow|Rig |
+   * `----------------------------------------------------------------'
+   */
+[0] = LAYOUT_65_ansi(
+  KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME, \
+  KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, \
+  KC_LCTL, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT, KC_PGDN,  \
+  KC_LSFT, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,           \
+  KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                          KC_RALT, MO(1),   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap Fn Layer
+   * ,----------------------------------------------------------------.
+   * |   | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |Ins |
+   * |----------------------------------------------------------------|
+   * |     |   |Up |   |   |   |   |   |   |   |   |   |   |     |Hme |
+   * |----------------------------------------------------------------|
+   * |      |<- |Dn | ->|   |   |   |   |   |   |   |   |        |End |
+   * |----------------------------------------------------------------|
+   * |        |   |   |Bl-|BL |BL+|   |VU-|VU+|MUT|   |   McL|MsU|McR |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                       |   |   |    |MsL|MsD|MsR |
+   * `----------------------------------------------------------------'
+   */
+[1] = LAYOUT_65_ansi(
+   KC_GRV,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,          KC_DEL,KC_INS, \
+   KC_CAPS,_______,  KC_UP,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,  KC_UP,_______,     _______,_______,   \
+      _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,            _______,_______, \
+           _______,_______,_______,_______,_______,_______,_______,_______, KC_END,KC_PGDN,KC_DOWN,       _______,KC_PGUP,_______, \
+    _______,  _______,  _______,                     _______,                     _______,_______,_______,KC_HOME,KC_PGDN, KC_END),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/kbd67/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for kbd67

keyboards/kbd67/readme.md

@@ -0,0 +1,15 @@
+# kbd67
+
+![kbd67](imgur.com image replace me!)
+
+65% keyboard with blocker.  
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: KBD67 PCB  
+Hardware Availability: [KBDFans](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kbd67:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbd67/rules.mk

@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/rama/m6_a/config.h

@@ -1,20 +1,18 @@
-/*
-Copyright 2018 Wilba
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #pragma once
 
 #include "config_common.h"
@@ -47,7 +45,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
- 
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
@@ -109,88 +107,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
 #define RGB_BACKLIGHT_ENABLED 0
 
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
-
 // EEPROM usage
 
 // TODO: refactor with new user EEPROM code (coming soon)
@@ -206,3 +126,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
 // Dynamic keymap starts after backlight config (35+37)
 #define DYNAMIC_KEYMAP_EEPROM_ADDR 72
+

keyboards/rama/m6_a/rules.mk

@@ -1,5 +1,5 @@
 # project specific files
-SRC =	keyboards/rama/m6_b/m6_b.c
+SRC =	../zeal60/zeal60.c
 
 # MCU name
 MCU = atmega32u4
@@ -43,24 +43,32 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 # Boot Section
 BOOTLOADER = atmel-dfu
 
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+CONSOLE_ENABLE = no         # Console for debug(+400)
 COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = no
+

keyboards/rama/m6_b/config.h

@@ -109,8 +109,38 @@
 
 #define RGB_BACKLIGHT_ENABLED 1
 
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+// This conditionally compiles the backlight code for M6-B specifics
+#define RGB_BACKLIGHT_M6_B
 
+// enable/disable LEDs based on layout
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
 // EEPROM usage
 
@@ -127,3 +157,4 @@
 #define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
 // Dynamic keymap starts after backlight config (35+37)
 #define DYNAMIC_KEYMAP_EEPROM_ADDR 72
+

keyboards/rama/m6_b/m6_b.c

@@ -13,218 +13,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "m6_b.h"
-#include "m6_b_api.h"
-
-// Check that no backlight functions are called
-#if RGB_BACKLIGHT_ENABLED
-#include "rgb_backlight.h"
-#endif // RGB_BACKLIGHT_ENABLED
-
-#include "raw_hid.h"
-#include "dynamic_keymap.h"
-#include "timer.h"
-#include "tmk_core/common/eeprom.h"
-
-bool eeprom_is_valid(void)
-{
-	return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC &&
-			eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION);
-}
-
-void eeprom_set_valid(bool valid)
-{
-	eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF);
-	eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
-}
-
-void eeprom_reset(void)
-{
-	// Set the keyboard-specific EEPROM state as invalid.
-	eeprom_set_valid(false);
-	// Set the TMK/QMK EEPROM state as invalid.
-	eeconfig_disable();
-}
-
-#ifdef RAW_ENABLE
-
-void raw_hid_receive( uint8_t *data, uint8_t length )
-{
-	uint8_t *command_id = &(data[0]);
-	uint8_t *command_data = &(data[1]);
-	switch ( *command_id )
-	{
-		case id_get_protocol_version:
-		{
-			command_data[0] = PROTOCOL_VERSION >> 8;
-			command_data[1] = PROTOCOL_VERSION & 0xFF;
-			break;
-		}
-		case id_get_keyboard_value:
-		{
-			if ( command_data[0] == id_uptime )
-			{
-				uint32_t value = timer_read32();
-				command_data[1] = (value >> 24 ) & 0xFF;
-				command_data[2] = (value >> 16 ) & 0xFF;
-				command_data[3] = (value >> 8 ) & 0xFF;
-				command_data[4] = value & 0xFF;
-			}
-			else
-			{
-				*command_id = id_unhandled;
-			}
-			break;
-		}
-#ifdef DYNAMIC_KEYMAP_ENABLE
-		case id_dynamic_keymap_get_keycode:
-		{
-			uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] );
-			command_data[3] = keycode >> 8;
-			command_data[4] = keycode & 0xFF;
-			break;
-		}
-		case id_dynamic_keymap_set_keycode:
-		{
-			dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
-			break;
-		}
-		case id_dynamic_keymap_reset:
-		{
-			dynamic_keymap_reset();
-			break;
-		}
-#endif // DYNAMIC_KEYMAP_ENABLE
-#if RGB_BACKLIGHT_ENABLED
-		case id_backlight_config_set_value:
-		{
-			//backlight_config_set_value(command_data);
-			break;
-		}
-		case id_backlight_config_get_value:
-		{
-			//backlight_config_get_value(command_data);
-			break;
-		}
-		case id_backlight_config_save:
-		{
-			//backlight_config_save();
-			break;
-		}
-#endif // RGB_BACKLIGHT_ENABLED
-		case id_eeprom_reset:
-		{
-			eeprom_reset();
-			break;
-		}
-		case id_bootloader_jump:
-		{
-			// Need to send data back before the jump
-			// Informs host that the command is handled
-			raw_hid_send( data, length );
-			// Give host time to read it
-			wait_ms(100);
-			bootloader_jump();
-			break;
-		}
-		default:
-		{
-			// Unhandled message.
-			*command_id = id_unhandled;
-			break;
-		}
-	}
-
-	// Return same buffer with values changed
-	raw_hid_send( data, length );
-
-}
-
+#ifndef RGB_BACKLIGHT_M6_B
+#error RGB_BACKLIGHT_M6_B not defined, you done goofed somehao, brah
 #endif
-
-void main_init(void)
-{
-	// If the EEPROM has the magic, the data is good.
-	// OK to load from EEPROM.
-	if (eeprom_is_valid()) {
-#if RGB_BACKLIGHT_ENABLED
-		//backlight_config_load();
-#endif // RGB_BACKLIGHT_ENABLED
-	} else	{
-#if RGB_BACKLIGHT_ENABLED
-		// If the EEPROM has not been saved before, or is out of date,
-		// save the default values to the EEPROM. Default values
-		// come from construction of the zeal_backlight_config instance.
-		//backlight_config_save();
-#endif // RGB_BACKLIGHT_ENABLED
-#ifdef DYNAMIC_KEYMAP_ENABLE
-		// This resets the keymaps in EEPROM to what is in flash.
-		dynamic_keymap_reset();
-#endif
-		// Save the magic number last, in case saving was interrupted
-		eeprom_set_valid(true);
-	}
-#if RGB_BACKLIGHT_ENABLED
-	// Initialize LED drivers for backlight.
-	backlight_init_drivers();
-
-	backlight_timer_init();
-	backlight_timer_enable();
-#endif // RGB_BACKLIGHT_ENABLED
-}
-
-void bootmagic_lite(void)
-{
-	// The lite version of TMK's bootmagic.
-	// 100% less potential for accidentally making the
-	// keyboard do stupid things.
-
-	// We need multiple scans because debouncing can't be turned off.
-	matrix_scan();
-	wait_ms(DEBOUNCING_DELAY);
-	wait_ms(DEBOUNCING_DELAY);
-	matrix_scan();
-
-	// If the Esc (matrix 0,0) is held down on power up,
-	// reset the EEPROM valid state and jump to bootloader.
-	if ( matrix_get_row(0) & (1<<0) ) {
-		eeprom_reset();
-		bootloader_jump();
-	}
-}
-
-void matrix_init_kb(void) {
-	bootmagic_lite();
-	main_init();
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#if RGB_BACKLIGHT_ENABLED
-	// This only updates the LED driver buffers if something has changed.
-	backlight_update_pwm_buffers();
-#endif // BACKLIGHT_ENABLED
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	led_set_user(usb_led);
-}
-
-void suspend_power_down_kb(void)
-{
-#if RGB_BACKLIGHT_ENABLED
-	//backlight_set_suspend_state(true);
-#endif // BACKLIGHT_ENABLED
-}
-
-void suspend_wakeup_init_kb(void)
-{
-#if RGB_BACKLIGHT_ENABLED
-	//backlight_set_suspend_state(false);
-#endif // BACKLIGHT_ENABLED
-}

keyboards/rama/m6_b/rgb_backlight.c

@@ -1,139 +0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#if RGB_BACKLIGHT_ENABLED
-
-#include "rgb_backlight.h"
-//#include "rgb_backlight_api.h"
-
-#include <avr/io.h>
-#include <util/delay.h>
-#include <avr/interrupt.h>
-#include "progmem.h"
-
-#include "quantum/color.h"
-#include "drivers/avr/i2c_master.h"
-#include "drivers/issi/is31fl3218.h"
-
-bool g_suspend_state = false;
-
-// Global tick at 20 Hz
-uint32_t g_tick = 0;
-uint8_t g_config_effect_speed = 0;
-uint8_t g_config_brightness = 255;
-
-void backlight_update_pwm_buffers(void)
-{
-	IS31FL3218_update_pwm_buffers();
-}
-
-void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-	IS31FL3218_set_color( index, red, green, blue );
-}
-
-void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-	IS31FL3218_set_color_all( red, green, blue );
-}
-
-
-// This is (F_CPU/1024) / 20 Hz
-// = 15625 Hz / 20 Hz
-// = 781
-#define TIMER3_TOP 260
-
-void backlight_timer_init(void)
-{
-	static uint8_t backlight_timer_is_init = 0;
-	if ( backlight_timer_is_init )
-	{
-		return;
-	}
-	backlight_timer_is_init = 1;
-
-	// Timer 3 setup
-	TCCR3B = _BV(WGM32) | 			// CTC mode OCR3A as TOP
-			 _BV(CS32) | _BV(CS30); // prescale by /1024
-	// Set TOP value
-	uint8_t sreg = SREG;
-	cli();
-
-	OCR3AH = (TIMER3_TOP >> 8) & 0xff;
-	OCR3AL = TIMER3_TOP & 0xff;
-	SREG = sreg;
-}
-
-void backlight_timer_enable(void)
-{
-	TIMSK3 |= _BV(OCIE3A);
-}
-
-void backlight_timer_disable(void)
-{
-	TIMSK3 &= ~_BV(OCIE3A);
-}
-
-void backlight_set_suspend_state(bool state)
-{
-	g_suspend_state = state;
-}
-
-void backlight_effect_cycle_all(void)
-{
-	uint8_t hueOffset = ( g_tick << g_config_effect_speed ) & 0xFF;
-	uint8_t satOffset = 127;
-	// Relies on hue being 8-bit and wrapping
-	for ( int i=0; i<6; i++ )
-	{
-		HSV hsv = { .h = hueOffset, .s = satOffset, .v = g_config_brightness };
-		RGB rgb = hsv_to_rgb( hsv );
-		backlight_set_color( i, rgb.r, rgb.g, rgb.b );
-	}
-}
-
-ISR(TIMER3_COMPA_vect)
-{
-	// delay 1 second before driving LEDs or doing anything else
-	static uint8_t startup_tick = 0;
-	if ( startup_tick < 20 )
-	{
-		startup_tick++;
-		return;
-	}
-
-	g_tick++;
-
-	if ( g_suspend_state )
-	{
-		backlight_set_color_all( 0, 0, 0 );
-	}
-	else
-	{
-		//HSV hsv = { .h = 240, .s = 255, .v = g_config_brightness };
-		//RGB rgb = hsv_to_rgb( hsv );
-		//backlight_set_color_all( rgb.r, rgb.g, rgb.b );
-		backlight_effect_cycle_all();
-	}
-}
-
-void backlight_init_drivers(void)
-{
-	// Initialize I2C
-	i2c_init();
-	IS31FL3218_init();
-}
-
-#endif // RGB_BACKLIGHT_ENABLED

keyboards/rama/m6_b/rules.mk

@@ -1,5 +1,6 @@
 # project specific files
-SRC =	rgb_backlight.c \
+SRC =	../zeal60/zeal60.c \
+		../zeal60/rgb_backlight.c \
 		quantum/color.c \
 		drivers/issi/is31fl3218.c \
 		drivers/avr/i2c_master.c
@@ -56,22 +57,23 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+CONSOLE_ENABLE = no         # Console for debug(+400)
 COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 RAW_ENABLE = yes
 DYNAMIC_KEYMAP_ENABLE = yes
 CIE1931_CURVE = yes
+

keyboards/rama/u80_a/config.h

@@ -185,3 +185,20 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x07
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+37)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 72

keyboards/rama/u80_a/keymaps/default/keymap.c

@@ -18,5 +18,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
 	    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
 
+	  [2] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+	  [3] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
 };
 

keyboards/rama/u80_a/rules.mk

@@ -52,17 +52,21 @@ BOOTLOADER = atmel-dfu
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes

keyboards/redox/keymaps/finex/config.h

@@ -0,0 +1,36 @@
+/*
+Copyright 2018 Leonardo (FiNeX) Finetti <finex@finex.org>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8

keyboards/redox/keymaps/finex/keymap.c

@@ -0,0 +1,188 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Layer names
+#define _QWERTY 0
+#define _COLEMAKDHMK 1
+#define _QWERTY_MAC 2
+#define _COLEMAKDHMK_MAC 3
+#define _SYMB 4
+#define _ADJUST 5
+
+// Custom keycodes
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAKDHMK,
+  QWERTY_MAC,
+  COLEMAKDHMK_MAC,
+  SYMB,
+  ADJUST,
+  ASC_SAR,
+  ASC_DAR,
+  ASC_SQT,
+  ASC_DQT,
+  ASC_HAP,
+  ASC_SAD
+};
+
+// Shortcut to make keymap more readable
+#define KC_SYQT LT(_SYMB, KC_QUOT)
+#define KC_SYGR LT(_SYMB, KC_GRV)
+#define KC_SYSP LT(_SYMB, KC_SPC)
+#define KC_ADEN LT(_ADJUST, KC_END)
+#define KC_ADPU LT(_ADJUST, KC_PGUP)
+#define KC_CESC LCTL_T(KC_ESC)
+#define KC_CBSP LCTL_T(KC_BSPC)
+#define KC_CMIN RCTL_T(KC_MINUS)
+#define KC_GBSP LGUI_T(KC_BSPC)
+#define KC_ADEL LALT_T(KC_DEL)
+#define KC_APLS RALT_T(KC_PPLS)
+#define KC_LSEN LSFT_T(KC_ENT)
+#define KC_RSEN RSFT_T(KC_ENT)
+#define FN1 QWERTY
+#define FN2 COLEMAKDHMK
+#define FN3 QWERTY_MAC
+#define FN4 COLEMAKDHMK_MAC
+
+// Send custom strings or change default base layer
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+    switch(keycode) {
+      case ASC_SAR:
+        SEND_STRING("->");
+        return false;
+      case ASC_DAR:
+        SEND_STRING("=>");
+        return false;
+      case ASC_SQT:
+        // SS_RALT(): Avoid sending dead key on software intl layouts
+        SEND_STRING(SS_RALT("'"));
+        return false;
+      case ASC_DQT:
+        // SS_RALT(SS_LSFT()): Avoid sending dead key on software intl layouts
+        SEND_STRING(SS_RALT(SS_LSFT("\"")));
+        return false;
+      case ASC_HAP:
+        SEND_STRING(":-) ");
+        return false;
+      case ASC_SAD:
+        SEND_STRING(":-( ");
+        return false;
+      case QWERTY:
+        if (record->event.pressed) {
+          set_single_persistent_default_layer(_QWERTY);
+        }
+        return false;
+        break;
+      case COLEMAKDHMK:
+        if (record->event.pressed) {
+          set_single_persistent_default_layer(_COLEMAKDHMK);
+        }
+        return false;
+        break;
+      case QWERTY_MAC:
+        if (record->event.pressed) {
+          set_single_persistent_default_layer(_QWERTY_MAC);
+        }
+        return false;
+        break;
+      case COLEMAKDHMK_MAC:
+        if (record->event.pressed) {
+          set_single_persistent_default_layer(_COLEMAKDHMK_MAC);
+        }
+        return false;
+        break;
+    }
+  }
+  return true;
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_SYGR ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,                                            KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_SYQT ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_TAB  ,KC_Q    ,KC_W    ,KC_E    ,KC_R    ,KC_T    ,KC_DEL  ,                          KC_BSPC ,KC_Y    ,KC_U    ,KC_I    ,KC_O    ,KC_P    ,KC_EQL  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_CESC ,KC_A    ,KC_S    ,KC_D    ,KC_F    ,KC_G    ,KC_LBRC ,                          KC_RBRC ,KC_H    ,KC_J    ,KC_K    ,KC_L    ,KC_SCLN ,KC_CMIN ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_LSPO ,KC_Z    ,KC_X    ,KC_C    ,KC_V    ,KC_B    ,KC_ADPU ,KC_PGDN ,        KC_HOME ,KC_ADEN ,KC_N    ,KC_M    ,KC_COMM ,KC_DOT  ,KC_SLSH ,KC_RSPC ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+     KC_SYSP ,KC_BSLS ,KC_QUOT ,KC_LGUI ,     KC_ADEL ,    KC_CBSP ,KC_LSEN ,        KC_RSEN ,KC_SYSP ,    KC_APLS ,     KC_LEFT ,KC_DOWN ,KC_UP   ,KC_RGHT
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+
+  [_COLEMAKDHMK] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_SYGR ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,                                            KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_SYQT ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_TAB  ,KC_Q    ,KC_W    ,KC_F    ,KC_P    ,KC_B    ,KC_DEL  ,                          KC_BSPC ,KC_J    ,KC_L    ,KC_U    ,KC_Y    ,KC_SCLN ,KC_EQL  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_CESC ,KC_A    ,KC_R    ,KC_S    ,KC_T    ,KC_G    ,KC_LBRC ,                          KC_RBRC ,KC_M    ,KC_N    ,KC_E    ,KC_I    ,KC_O    ,KC_CMIN ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_LSPO ,KC_Z    ,KC_X    ,KC_C    ,KC_D    ,KC_V    ,KC_ADPU ,KC_PGDN ,        KC_HOME ,KC_ADEN ,KC_K    ,KC_H    ,KC_COMM ,KC_DOT  ,KC_SLSH ,KC_RSPC ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+     KC_SYSP ,KC_BSLS ,KC_QUOT ,KC_LGUI ,     KC_ADEL ,    KC_CBSP ,KC_LSEN ,        KC_RSEN ,KC_SYSP ,    KC_APLS ,     KC_LEFT ,KC_DOWN ,KC_UP   ,KC_RGHT
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+
+  [_QWERTY_MAC] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_SYGR ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,                                            KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_SYQT ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_TAB  ,KC_Q    ,KC_W    ,KC_E    ,KC_R    ,KC_T    ,KC_DEL  ,                          KC_BSPC ,KC_Y    ,KC_U    ,KC_I    ,KC_O    ,KC_P    ,KC_EQL  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_CESC ,KC_A    ,KC_S    ,KC_D    ,KC_F    ,KC_G    ,KC_LBRC ,                          KC_RBRC ,KC_H    ,KC_J    ,KC_K    ,KC_L    ,KC_SCLN ,KC_CMIN ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_LSPO ,KC_Z    ,KC_X    ,KC_C    ,KC_V    ,KC_B    ,KC_ADPU ,KC_PGDN ,        KC_HOME ,KC_ADEN ,KC_N    ,KC_M    ,KC_COMM ,KC_DOT  ,KC_SLSH ,KC_RSPC ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+     KC_SYSP ,KC_BSLS ,KC_QUOT ,KC_LCTL ,     KC_ADEL ,    KC_GBSP ,KC_LSEN ,        KC_RSEN ,KC_SYSP ,    KC_APLS ,     KC_LEFT ,KC_DOWN ,KC_UP   ,KC_RGHT
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+
+  [_COLEMAKDHMK_MAC] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_SYGR ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,                                            KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_SYQT ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_TAB  ,KC_Q    ,KC_W    ,KC_F    ,KC_P    ,KC_B    ,KC_DEL  ,                          KC_BSPC ,KC_J    ,KC_L    ,KC_U    ,KC_Y    ,KC_SCLN ,KC_EQL  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_CESC ,KC_A    ,KC_R    ,KC_S    ,KC_T    ,KC_G    ,KC_LBRC ,                          KC_RBRC ,KC_M    ,KC_N    ,KC_E    ,KC_I    ,KC_O    ,KC_CMIN ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_LSPO ,KC_Z    ,KC_X    ,KC_C    ,KC_D    ,KC_V    ,KC_ADPU ,KC_PGDN ,        KC_HOME ,KC_ADEN ,KC_K    ,KC_H    ,KC_COMM ,KC_DOT  ,KC_SLSH ,KC_RSPC ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+     KC_SYSP ,KC_BSLS ,KC_QUOT ,KC_LCTL ,     KC_ADEL ,    KC_GBSP ,KC_LSEN ,        KC_RSEN ,KC_SYSP ,    KC_APLS ,     KC_LEFT ,KC_DOWN ,KC_UP   ,KC_RGHT
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+
+  [_SYMB] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     XXXXXXX ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,                                            KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______ ,KC_CIRC ,KC_BSLS ,KC_PMNS ,KC_UNDS ,XXXXXXX ,_______ ,                          _______ ,XXXXXXX ,KC_KP_7 ,KC_KP_8 ,KC_KP_9 ,KC_F11  ,KC_APP  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______ ,KC_PAST ,KC_PIPE ,ASC_SQT ,KC_TILD ,KC_QUOT ,ASC_SAR ,                          ASC_DAR ,XXXXXXX ,KC_KP_4 ,KC_KP_5 ,KC_KP_6 ,KC_F12  ,KC_PSCR ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______ ,KC_HASH ,KC_AMPR  ,KC_AT  ,ASC_DQT ,KC_GRV  ,ASC_SAD ,ASC_HAP ,        _______ ,_______ ,XXXXXXX ,KC_KP_1 ,KC_KP_2 ,KC_KP_3 ,KC_UP   ,_______ ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+     _______ ,_______ ,_______ ,_______ ,     _______ ,    _______ ,_______ ,        _______ ,_______ ,    KC_KP_0 ,     KC_PDOT ,KC_LEFT ,KC_DOWN ,KC_RGHT
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+
+  [_ADJUST] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     XXXXXXX ,FN1     ,FN2     ,FN3     ,FN4     ,XXXXXXX ,                                            XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,RESET   ,RGB_M_P ,RGB_TOG ,RGB_MOD ,RGB_HUD ,RGB_HUI ,                          RGB_SAD ,RGB_SAI ,RGB_VAD ,RGB_VAI ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,RGB_M_B ,RGB_M_R ,RGB_M_SW,RGB_M_SN,XXXXXXX ,                          XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,RGB_M_K ,RGB_M_X ,RGB_M_G ,XXXXXXX ,_______ ,XXXXXXX ,        XXXXXXX ,_______ ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,     XXXXXXX ,    XXXXXXX ,XXXXXXX ,        XXXXXXX ,XXXXXXX ,    XXXXXXX ,     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  )
+
+};

keyboards/redox/keymaps/finex/readme.md

@@ -0,0 +1,35 @@
+# Customized keymap for Redox by Leonardo (FiNeX) Finetti.
+
+
+## Features
+
+- Enabled USE_SERIAL for Falba.Tech Redox keyboards.
+- PC Layouts: QWERTY, Colemak Mod DH-MK.
+- Mac Layouts: same as above with CTRL-GUI keys inverted on the bottom row.
+- Added redundant "Space", "Esc" and "Ctrl" keys.
+- Added macro to print "->" and "=>" strings.
+- Added macro to print ":-( " and ":-) " strings.
+- Added more arrows.
+- Added "(" and ")" on Shifts keys.
+- Added Shift on both ) "Enter" keys.
+- Removed Mouse and media support.
+- Added missing "Print Screen" and "Menu" keys.
+- Added missing "F11" and "F12" keys.
+
+
+## Layers
+
+This keymap use the default one with some minor improvements to suit my needs.
+
+## Changelog
+
+- 2018/11/13
+  First public release
+
+
+## TODO
+
+- Bring back mouse and multimedia keys.
+- Add default Colemak Mod DH layout.
+- Improve top corner keys.
+- Improve bottom row keys (mostly KC_BSLS and KC_QUOT).

keyboards/redox/keymaps/finex/rules.mk

@@ -0,0 +1,3 @@
+RGBLIGHT_ENABLE = yes
+
+COMMAND_ENABLE = no

keyboards/wilba_tech/wt60_a/config.h

@@ -185,3 +185,20 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x07
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+37)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 72

keyboards/wilba_tech/wt60_a/rules.mk

@@ -52,17 +52,20 @@ BOOTLOADER = atmel-dfu
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes

keyboards/wilba_tech/wt65_a/config.h

@@ -185,3 +185,20 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x07
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+37)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 72

keyboards/wilba_tech/wt65_a/rules.mk

@@ -52,17 +52,20 @@ BOOTLOADER = atmel-dfu
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes

keyboards/wilba_tech/wt80_a/config.h

@@ -185,3 +185,20 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x07
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+37)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 72

keyboards/wilba_tech/wt80_a/keymaps/default/keymap.c

@@ -18,5 +18,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
 	    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
 
+	  [2] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+	  [3] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
 };
 

keyboards/wilba_tech/wt80_a/rules.mk

@@ -52,17 +52,20 @@ BOOTLOADER = atmel-dfu
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes

keyboards/wilba_tech/wt80_a/wt80_a.h

@@ -41,3 +41,18 @@
     { K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, K516 }  \
 }
 
+#define LAYOUT_no_split( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,             K014, K015, K016, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K114, K115, K116, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K214, K215, K216, \
+    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,                               \
+    K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,                   K415,       \
+    K500, K501, K502,                   K506,                   K510, K511, K512, K513,       K514, K515, K516  \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, K015, K016 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \
+    { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____ }, \
+	{ K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, ____ }, \
+    { K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, K516 }  \
+}

keyboards/wilba_tech/wt_main.c

@@ -16,6 +16,152 @@
 
 #include "quantum.h"
 #include "keyboards/wilba_tech/wt_mono_backlight.h"
+#include "keyboards/zeal60/zeal60_api.h" // Temporary hack
+
+#include "raw_hid.h"
+#include "dynamic_keymap.h"
+#include "timer.h"
+#include "tmk_core/common/eeprom.h"
+
+bool eeprom_is_valid(void)
+{
+	return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC &&
+			eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION);
+}
+
+void eeprom_set_valid(bool valid)
+{
+	eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF);
+	eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
+}
+
+void eeprom_reset(void)
+{
+	// Set the Zeal60 specific EEPROM state as invalid.
+	eeprom_set_valid(false);
+	// Set the TMK/QMK EEPROM state as invalid.
+	eeconfig_disable();
+}
+
+#ifdef RAW_ENABLE
+
+void raw_hid_receive( uint8_t *data, uint8_t length )
+{
+	uint8_t *command_id = &(data[0]);
+	uint8_t *command_data = &(data[1]);
+	switch ( *command_id )
+	{
+		case id_get_protocol_version:
+		{
+			command_data[0] = PROTOCOL_VERSION >> 8;
+			command_data[1] = PROTOCOL_VERSION & 0xFF;
+			break;
+		}
+		case id_get_keyboard_value:
+		{
+			if ( command_data[0] == id_uptime )
+			{
+				uint32_t value = timer_read32();
+				command_data[1] = (value >> 24 ) & 0xFF;
+				command_data[2] = (value >> 16 ) & 0xFF;
+				command_data[3] = (value >> 8 ) & 0xFF;
+				command_data[4] = value & 0xFF;
+			}
+			else
+			{
+				*command_id = id_unhandled;
+			}
+			break;
+		}
+#ifdef DYNAMIC_KEYMAP_ENABLE
+		case id_dynamic_keymap_get_keycode:
+		{
+			uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] );
+			command_data[3] = keycode >> 8;
+			command_data[4] = keycode & 0xFF;
+			break;
+		}
+		case id_dynamic_keymap_set_keycode:
+		{
+			dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
+			break;
+		}
+		case id_dynamic_keymap_reset:
+		{
+			dynamic_keymap_reset();
+			break;
+		}
+#endif // DYNAMIC_KEYMAP_ENABLE
+		case id_backlight_config_set_value:
+		{
+			//backlight_config_set_value(command_data);
+			break;
+		}
+		case id_backlight_config_get_value:
+		{
+			//backlight_config_get_value(command_data);
+			break;
+		}
+		case id_backlight_config_save:
+		{
+			//backlight_config_save();
+			break;
+		}
+		case id_eeprom_reset:
+		{
+			eeprom_reset();
+			break;
+		}
+		case id_bootloader_jump:
+		{
+			// Need to send data back before the jump
+			// Informs host that the command is handled
+			raw_hid_send( data, length );
+			// Give host time to read it
+			wait_ms(100);
+			bootloader_jump();
+			break;
+		}
+		default:
+		{
+			// Unhandled message.
+			*command_id = id_unhandled;
+			break;
+		}
+	}
+
+	// Return same buffer with values changed
+	raw_hid_send( data, length );
+
+}
+
+#endif
+
+void main_init(void)
+{
+	// If the EEPROM has the magic, the data is good.
+	// OK to load from EEPROM.
+	if (eeprom_is_valid()) {
+		//backlight_config_load();
+	} else	{
+		// If the EEPROM has not been saved before, or is out of date,
+		// save the default values to the EEPROM. Default values
+		// come from construction of the zeal_backlight_config instance.
+		//backlight_config_save();
+#ifdef DYNAMIC_KEYMAP_ENABLE
+		// This resets the keymaps in EEPROM to what is in flash.
+		dynamic_keymap_reset();
+#endif
+		// Save the magic number last, in case saving was interrupted
+		eeprom_set_valid(true);
+	}
+
+	// Initialize LED drivers for backlight.
+	backlight_init_drivers();
+
+	backlight_timer_init();
+	backlight_timer_enable();
+}
 
 void bootmagic_lite(void)
 {
@@ -32,9 +178,7 @@ void bootmagic_lite(void)
 	// If the Esc (matrix 0,0) is held down on power up,
 	// reset the EEPROM valid state and jump to bootloader.
 	if ( matrix_get_row(0) & (1<<0) ) {
-		// Set the TMK/QMK EEPROM state as invalid.
-		eeconfig_disable();
-		// Jump to bootloader.
+		eeprom_reset();
 		bootloader_jump();
 	}
 }
@@ -42,14 +186,13 @@ void bootmagic_lite(void)
 void matrix_init_kb(void)
 {
 	bootmagic_lite();
-	backlight_init_drivers();
-	backlight_timer_init();
-	backlight_timer_enable();
+	main_init();
 	matrix_init_user();
 }
 
 void matrix_scan_kb(void)
 {
+	// This only updates the LED driver buffers if something has changed.
 	backlight_update_pwm_buffers();
 	matrix_scan_user();
 }

keyboards/zeal60/rgb_backlight.c

@@ -15,12 +15,12 @@
  */
 #if RGB_BACKLIGHT_ENABLED
 
-#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A)
+#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B)
 #else
-#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A
+#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B
 #endif
 
-#include "zeal60.h"
+#include "quantum.h"
 #include "rgb_backlight.h"
 #include "rgb_backlight_api.h"
 #include "rgb_backlight_keycodes.h"
@@ -32,7 +32,14 @@
 
 #include "quantum/color.h"
 #include "drivers/avr/i2c_master.h"
+
+#if defined (RGB_BACKLIGHT_M6_B)
+#include "drivers/issi/is31fl3218.h"
+#define BACKLIGHT_LED_COUNT 6
+#else
 #include "drivers/issi/is31fl3731.h"
+#define BACKLIGHT_LED_COUNT 72
+#endif
 
 #define BACKLIGHT_EFFECT_MAX 10
 
@@ -69,11 +76,12 @@ uint8_t g_indicator_state = 0;
 uint32_t g_tick = 0;
 
 // Ticks since this key was last hit.
-uint8_t g_key_hit[72];
+uint8_t g_key_hit[BACKLIGHT_LED_COUNT];
 
 // Ticks since any key was last hit.
 uint32_t g_any_key_hit = 0;
 
+#if !defined(RGB_BACKLIGHT_M6_B)
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
 #define ISSI_ADDR_1 0x74
@@ -162,7 +170,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 	{1, C9_16, C7_15, C6_15}, // LD16
 	{1, C8_16, C7_16, C6_16}, // LD17
 };
-
+#endif // !defined(RGB_BACKLIGHT_M6_B)
 
 
 typedef struct Point {
@@ -175,7 +183,7 @@ typedef struct Point {
 // point values in range x=0..224 y=0..64
 // origin is center of top-left key (i.e Esc)
 #if defined (RGB_BACKLIGHT_ZEAL65)
-const Point g_map_led_to_point[72] PROGMEM = {
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
 	// LA0..LA17
 	{120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
 	{128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
@@ -189,7 +197,7 @@ const Point g_map_led_to_point[72] PROGMEM = {
 	{124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48},
 	{116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {144,60}, {164,64}, {188,64}, {208,64}
 };
-const Point g_map_led_to_point_polar[72] PROGMEM = {
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
 	// LA0..LA17
 	{64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,247},
 	{61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255},
@@ -204,7 +212,7 @@ const Point g_map_led_to_point_polar[72] PROGMEM = {
 	{189,128}, {200,131}, {210,141}, {218,159}, {201,228}, {201,228}, {206,255}, {213,255}, {218,255}
 };
 #elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A)
-const Point g_map_led_to_point[72] PROGMEM = {
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
 	// LA0..LA17
 	{120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
 	{128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
@@ -218,7 +226,7 @@ const Point g_map_led_to_point[72] PROGMEM = {
 	{124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {210,48}, {224,48},
 	{116,48}, {132,48}, {148,48}, {164,48}, {144,64}, {161,64}, {181,64}, {201,64}, {221,64}
 };
-const Point g_map_led_to_point_polar[72] PROGMEM = {
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
 	// LA0..LA17
 	{58,129}, {70,129}, {80,139}, {89,157}, {96,181}, {101,208}, {105,238}, {109,255}, {128,247}, {58,255},
 	{64,255}, {70,255}, {75,255}, {80,255}, {85,255}, {89,255}, {93,255}, {96,255},
@@ -232,6 +240,16 @@ const Point g_map_led_to_point_polar[72] PROGMEM = {
 	{0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255},
 	{195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255}
 };
+#elif defined (RGB_BACKLIGHT_M6_B)
+// M6-B is really simple:
+// 0 3 5
+// 1 2 4
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+	{0,0}, {0,16}, {16,16}, {16,0}, {32,16}, {32,0}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+	{0,0}, {0,16}, {16,16}, {16,0}, {32,16}, {32,0}
+};
 #endif
 
 // This may seem counter-intuitive, but it's quite flexible.
@@ -245,16 +263,30 @@ void map_led_to_point( uint8_t index, Point *point )
 	point->x = pgm_read_byte(addr);
 	point->y = pgm_read_byte(addr+1);
 
+#if defined (RGB_BACKLIGHT_M6_B)
+	return;
+#endif
+
 	switch (index)
 	{
 		case 18+4: // LB4A
 			if ( g_config.use_split_backspace )
 				point->x -= 8;
 			break;
+#if defined (RGB_BACKLIGHT_ZEAL60)
 		case 18+14: // LB14A
 			if ( g_config.use_iso_enter )
 				point->y += 8; // extremely pedantic
 			break;
+		case 54+5: // LD5A
+			if ( !g_config.use_iso_enter )
+				point->x -= 10;
+			break;
+		case 36+16: // LC16A
+			if ( !g_config.use_split_left_shift )
+				point->x += 8;
+			break;
+#endif
 #if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A)
 		case 36+0: // LC0A
 			if ( g_config.use_7u_spacebar )
@@ -264,19 +296,11 @@ void map_led_to_point( uint8_t index, Point *point )
 			if ( g_config.use_7u_spacebar )
 				point->x += 4;
 			break;
-#endif
-		case 36+16: // LC16A
-			if ( !g_config.use_split_left_shift )
-				point->x += 8;
-			break;
-		case 54+5: // LD5A
-			if ( !g_config.use_iso_enter )
-				point->x -= 10;
-			break;
 		case 54+7: // LD7A
 			if ( !g_config.use_split_right_shift )
 				point->x -= 8;
 			break;
+#endif
 	}
 }
 
@@ -325,6 +349,13 @@ const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
 	{ 36+16, 36+15,  36+5,  36+4,  36+3,  36+2,  36+1,  54+9, 54+10, 54+11, 54+12,  54+6,  54+7,  54+8 },
 	{ 36+17,  36+8,  36+7,  36+6,   255,   255,   255,  36+0,  255,  54+13, 54+14, 54+15, 54+16, 54+17 }
 };
+#elif defined (RGB_BACKLIGHT_M6_B)
+// M6-B is really simple:
+// 0 3 5
+// 1 2 4
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+	{     0,     3,     5,     1,     2,     4 }
+};
 #endif
 
 void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led )
@@ -338,18 +369,30 @@ void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led )
 
 void backlight_update_pwm_buffers(void)
 {
+#if defined (RGB_BACKLIGHT_M6_B)
+	IS31FL3218_update_pwm_buffers();
+#else
 	IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 );
 	IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
+#endif
 }
 
 void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
 {
+#if defined (RGB_BACKLIGHT_M6_B)
+	IS31FL3218_set_color( index, red, green, blue );
+#else
 	IS31FL3731_set_color( index, red, green, blue );
+#endif
 }
 
 void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
 {
+#if defined (RGB_BACKLIGHT_M6_B)
+	IS31FL3218_set_color_all( red, green, blue );
+#else
 	IS31FL3731_set_color_all( red, green, blue );
+#endif
 }
 
 void backlight_set_key_hit(uint8_t row, uint8_t column)
@@ -436,6 +479,7 @@ void backlight_effect_rgb_test(void)
 	}
 }
 
+#if defined(RGB_DEBUGGING_ONLY)
 // This tests the LEDs
 // Note that it will change the LED control registers
 // in the LED drivers, and leave them in an invalid
@@ -475,6 +519,7 @@ void backlight_effect_single_LED_test(void)
 	backlight_set_color_all( 255, 255, 255 );
 	backlight_test_led( led, color==0, color==1, color==2 );
 }
+#endif // defined(RGB_DEBUGGING_ONLY)
 
 // All LEDs off
 void backlight_effect_all_off(void)
@@ -502,7 +547,7 @@ void backlight_effect_alphas_mods(void)
 		{
 			uint8_t index;
 			map_row_column_to_led( row, column, &index );
-			if ( index < 72 )
+			if ( index < BACKLIGHT_LED_COUNT )
 			{
 				if ( ( g_config.alphas_mods[row] & (1<<column) ) == 0 )
 				{
@@ -542,7 +587,7 @@ void backlight_effect_gradient_up_down(void)
 	HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
 	RGB rgb;
 	Point point;
-	for ( int i=0; i<72; i++ )
+	for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
 	{
 		map_led_to_point( i, &point );
 		// The y range will be 0..64, map this to 0..4
@@ -580,9 +625,9 @@ void backlight_effect_raindrops(bool initialize)
 	RGB rgb;
 
 	// Change one LED every tick
-	uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % 72 : 255;
+	uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255;
 
-	for ( int i=0; i<72; i++ )
+	for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
 	{
 		// If initialize, all get set to random colors
 		// If not, all but one will stay the same as before.
@@ -604,7 +649,7 @@ void backlight_effect_cycle_all(void)
 	uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
 
 	// Relies on hue being 8-bit and wrapping
-	for ( int i=0; i<72; i++ )
+	for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
 	{
 		uint16_t offset2 = g_key_hit[i]<<2;
 		// stabilizer LEDs use spacebar hits
@@ -627,7 +672,7 @@ void backlight_effect_cycle_left_right(void)
 	HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
 	RGB rgb;
 	Point point;
-	for ( int i=0; i<72; i++ )
+	for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
 	{
 		uint16_t offset2 = g_key_hit[i]<<2;
 		// stabilizer LEDs use spacebar hits
@@ -652,7 +697,7 @@ void backlight_effect_cycle_up_down(void)
 	HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
 	RGB rgb;
 	Point point;
-	for ( int i=0; i<72; i++ )
+	for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
 	{
 		uint16_t offset2 = g_key_hit[i]<<2;
 		// stabilizer LEDs use spacebar hits
@@ -677,9 +722,9 @@ void backlight_effect_jellybean_raindrops( bool initialize )
 	RGB rgb;
 
 	// Change one LED every tick
-	uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % 72 : 255;
+	uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255;
 
-	for ( int i=0; i<72; i++ )
+	for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
 	{
 		// If initialize, all get set to random colors
 		// If not, all but one will stay the same as before.
@@ -702,7 +747,7 @@ void backlight_effect_cycle_radial1(void)
 	HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
 	RGB rgb;
 	Point point;
-	for ( int i=0; i<72; i++ )
+	for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
 	{
 		map_led_to_point_polar( i, &point );
 		// Relies on hue being 8-bit and wrapping
@@ -720,7 +765,7 @@ void backlight_effect_cycle_radial2(void)
 	HSV hsv = { .h = 0, .s = g_config.color_1.s, .v = g_config.brightness };
 	RGB rgb;
 	Point point;
-	for ( int i=0; i<72; i++ )
+	for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
 	{
 		map_led_to_point_polar( i, &point );
 		uint8_t offset2 = offset + point.x;
@@ -826,7 +871,7 @@ ISR(TIMER3_COMPA_vect)
 		g_any_key_hit++;
 	}
 
-	for ( int led = 0; led < 72; led++ )
+	for ( int led = 0; led < BACKLIGHT_LED_COUNT; led++ )
 	{
 		if ( g_key_hit[led] < 255 )
 		{
@@ -899,7 +944,9 @@ ISR(TIMER3_COMPA_vect)
 
 	if ( ! suspend_backlight )
 	{
+#if !defined(RGB_BACKLIGHT_M6_B)
 		backlight_effect_indicators();
+#endif
 	}
 }
 
@@ -1239,17 +1286,19 @@ void backlight_init_drivers(void)
 {
 	// Initialize I2C
 	i2c_init();
+
+#if defined(RGB_BACKLIGHT_M6_B)
+	IS31FL3218_init();
+#else
 	IS31FL3731_init( ISSI_ADDR_1 );
 	IS31FL3731_init( ISSI_ADDR_2 );
 
-	for ( int index = 0; index < 72; index++ )
+	for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ )
 	{
 		// OR the possible "disabled" cases together, then NOT the result to get the enabled state
 		// LC6 LD13 not present on Zeal65
 #if defined (RGB_BACKLIGHT_ZEAL65)
 		bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5
-						  ( index == 36+15 && !g_config.use_split_left_shift ) || // LC15
-						  ( index == 54+8 && !g_config.use_split_right_shift ) || // LD8
 						  ( index == 36+6 ) || // LC6
 						  ( index == 54+13 ) ); // LD13
 #elif defined (RGB_BACKLIGHT_M60_A)
@@ -1286,11 +1335,12 @@ void backlight_init_drivers(void)
 	}
 	// This actually updates the LED drivers
 	IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
+#endif // !defined(RGB_BACKLIGHT_M6_B)
 
 	// TODO: put the 1 second startup delay here?
 
 	// clear the key hits
-	for ( int led=0; led<72; led++ )
+	for ( int led=0; led<BACKLIGHT_LED_COUNT; led++ )
 	{
 		g_key_hit[led] = 255;
 	}
@@ -1510,9 +1560,10 @@ void backlight_color_2_sat_decrease(void)
 	backlight_config_save();
 }
 
+#if defined(RGB_DEBUGGING_ONLY)
 void backlight_test_led( uint8_t index, bool red, bool green, bool blue )
 {
-	for ( int i=0; i<72; i++ )
+	for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
 	{
 		if ( i == index )
 		{
@@ -1524,6 +1575,7 @@ void backlight_test_led( uint8_t index, bool red, bool green, bool blue )
 		}
 	}
 }
+#endif // defined(RGB_DEBUGGING_ONLY)
 
 void backlight_debug_led( bool state )
 {

keyboards/zeal60/zeal60.c

@@ -164,6 +164,7 @@ void main_init(void)
 		// Save the magic number last, in case saving was interrupted
 		eeprom_set_valid(true);
 	}
+
 #if RGB_BACKLIGHT_ENABLED
 	// Initialize LED drivers for backlight.
 	backlight_init_drivers();

keyboards/zeal65/config.h

@@ -79,10 +79,10 @@
 
 // enable/disable LEDs based on layout
 #define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0  // Unused
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 // Unused
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1       // Used only for stab LED matching spacebar LED
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0         // Unused
 #define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
 
 // disable backlight when USB suspended (PC sleep/hibernate/shutdown)

quantum/template/avr/config.h

@@ -54,11 +54,24 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
-// #define RGBLIGHT_ANIMATIONS
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
 // #endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */

util/bootloader_atmega32u4_1_0_0.hex

@@ -1,253 +1,253 @@
-:020000020000FC
-:047000000C948D3E21
-:047028000C94B73DD0
-:10702F0012010002FF010020EB03F42F0000010208
-:10703F00030109021200010100803209040000005F
-:10704F00000000000C03410054004D0045004C00AF
-:10705F001603410054006D00330032005500340018
-:10706F004400460055000C0331002E0030002E0066
-:10707F0030000403090416010C0100000C0000018C
-:02708F006C7F14
-:1070920012BD01BDF89A00B5089501E00895F9996D
-:1070A200FECF12BD01BD20BDFA9AF99AF6CFF99929
-:1070B200FECF0C944938F80104910895F8013491F7
-:1070C20031962491890108950091610000930C0189
-:1070D20000E80093610001E00093610005BF02E057
-:1070E20005BF0C9486380091D70001600093D70049
-:1070F200A89507EF04BF0091600000610093600053
-:1071020000E00093600001E008950E94AA3D0E9401
-:10711200B53DFDCF0CD00F7708D0006806D00061D6
-:1071220004D0016028D0789408950093D80000918B
-:10713200D8000895FCDF00621ED04CD009B500FFD4
-:10714200FDCFF5DF0F7D17D00091E0000E7F009399
-:10715200E0000091E000077F0093E0000091E20070
-:1071620001600093E2000091E20008600093E200F7
-:1071720078940C94743B0093D800089500910D010B
-:10718200002359F40091D90000FF07C0D0DF006846
-:10719200F2DF01E000930D01CDDFE0E2F2E00081D9
-:1071A200018100FF0DC0008111811E7F11830083C8
-:1071B20001E00093EA0000E00093EA0000931E025F
-:1071C20000E00093E9000091E80003FF02C00E9482
-:1071D200F23B0895A89539D000E40093600000E0E6
-:1071E200009381000093800010E0009385000093DB
-:1071F200840001E006BB00918100036000938100DE
-:107202000091600007FFFCCF00E80093600010933C
-:107212008100A89507EF04BF18D010936000209159
-:1072220084003091850010938100109380001093A8
-:1072320085001093840001E006BB2D3D354010F01F
-:1072420002E101C002E009BD089500916000006101
-:107252000093600008950E94AD3E239741D100E063
-:1072620000930901B5D104811581012B51F437D165
-:1072720000910701002309F4B9C000E0009307015F
-:10728200B5C058D102FFFDCF37D1068335D1009367
-:107292000F0132D1009310012FD1009311012CD193
-:1072A2000093120129D10093130102852091130149
-:1072B20030911201409111015091100116811A95DD
-:1072C20041F01250A9F01A9599F11A9509F473C078
-:1072D2008BC010910F01113011F411E001C010E0C8
-:1072E200138799D00C3F11F414D17FC077D17DC0A0
-:1072F20092D010910F01112329F01A9549F01A9595
-:10730200A9F073C010E013870C3F09F06EC0ECCFF8
-:1073120056D103C04CD109F468C00D911C9144D1DF
-:107322000F3FC1F305E0009309015FC011E0EBCF0D
-:10733200D2D029F00250E1F10A9541F056C0FDD0B9
-:107342000E94A33F0FEF00930A014FC0552319F08B
-:107352005A9579F04AC04ED00DEF04BF74D0EAD0EE
-:1073620003FFFDCF67D051D04AD008E00093600000
-:10737200FFCF40D068D0DED003FFFDCF5BD03FD03F
-:1073820044D00FEF1FE004C009811A810150104060
-:1073920009831A8309811A81012BB1F700E800934E
-:1073A200610000910C01009361000C940000FFCF7A
-:1073B20001E003871AC08FD019F00A9539F015C081
-:1073C200535098F4BAD002E000870FC0505339F0FE
-:1073D2005A9541F05F52B1F35A95A1F306C002E00B
-:1073E2000883F0CF01E0FCCFA8D079D02396E4E067
-:1073F2000C94BA3E01E005BF00E005BF089500917C
-:10740200D8000F770093D800089509B50D7F09BD04
-:1074120000E009BD08955183408333832283109194
-:10742200E8001B7F1093E8001091E8001F7710938B
-:10743200E80008955DD053D0F8940091E000016017
-:107442000093E000089579D04AC0219749D0009175
-:107452000601035019F00250B9F00BC03CD021F0E4
-:107462000A9559F00A9529F400910A010C3F19F482
-:1074720050D02196089567D0FCCF0091010100936E
-:10748200F100009100010AC01091100124D019F0FE
-:107492000A9549F0EECF135018F400E00093F10082
-:1074A2001ED044D0E6CF105339F01A9539F01F524E
-:1074B20041F01A9541F0F4CF08E5F0CF00E006D094
-:1074C200EDCF02E0FCCF04E001D0E8CF10E020E0F5
-:1074D20030E00C94113F00910F010023089521C068
-:1074E2000BD008D007D00093040106D00093050109
-:1074F20021D00BC000D008830091F10008950091C3
-:10750200EB0000620093EB0015D0077F0093E800C8
-:107512000895F5DF02E00093080103E000930901FA
-:10752200089559D007D000FFFDCF089503D002FF80
-:10753200FDCF03C00091E8000895FCDF0B7FE6DF7A
-:10754200F9DF0F77E3CF0E94AC3E42D038D006C0BD
-:107552002BD00093F1002BD059F43DD0082F092BEA
-:10756200A9F0E8DF02FD12C0E5DF00FFFDCF4424F1
-:10757200042D4394003289F300910B0100230D91F5
-:107582001C9131F311970E945838E3CFD3DF00FFEB
-:10759200FDCF21D0CFDF00FFFDCFCCDF02FFFDCF3B
-:1075A200CCDFE5E00C94B93E11970C945C380D9158
-:1075B2001C910F5F1F4F1C930E93019708958281B8
-:1075C200938100811181801B910B0196DF01089547
-:1075D200E0E0F1E00895AEDF0E7F98CF0E94A93E71
-:1075E200F7DF80819181A081B181AF710481158122
-:1075F20000521040048315830AC000910B0100233E
-:1076020031F4A301920103E911E00E943B3F47D00C
-:10761200B8F1662477242C0111C06EDFF301ED5618
-:10762200FE4F008301E0600E00E0701E01960091A3
-:10763200F200002311F033D0B8F47FDF30D0E8F24B
-:10764200F301B096E238F040C0F674DF02FFFDCFDE
-:107652000091F200BDDF24813581201B304024835C
-:107662003583E5CF49DFAA95AA23E1F700910B0103
-:10767200013099F62091F1008C010E945038D6CF4A
-:1076820004811581012B21F055DF02FFFDCF55DF6B
-:10769200A2DF50DF00FFFDCFE8E00C94B63EE0E051
-:1076A200F1E0028113810817190708952091EB0078
-:1076B20021602093EB000093EC000091ED0002703A
-:1076C200012B0093ED000091ED0002600093ED00AC
-:1076D2001091EE00012F000F00E0001F0895412FCE
-:1076E2000093E900089500E009D000FD05C000E024
-:1076F200F7DF10E202E0DACF00E00895F1DF009157
-:10770200EB0008950F770132A9F5112369F11A955B
-:1077120059F01A9561F01A9569F01A95F9F01A95CF
-:10772200C1F01A95D9F024C00E942C3920C00E94C1
-:10773200263A1DC029D00091090123D001E01FD0B3
-:1077420020D0009108011BD00E94923A0E94973AE1
-:107752000EC01AD00091080114D007C002E00093B5
-:10776200080100E0009309010FD00E94923A03C081
-:107772000E94803A02C001E0089500E0089501D01D
-:1077820000E00093F10008950091E800077F009364
-:10779200E800089508950350F9F4112339F01A9579
-:1077A20051F01A9581F01A9599F016C004E016D09E
-:1077B20001E810E703C011D003E510E7E7E1F2E0CA
-:1077C20000831183D8CF06E109D00FE510E7F6CF89
-:1077D20004D005E710E7F2CFD0CF0CE000931A02F5
-:1077E200089527D120D100931D02E1D0212F11232A
-:1077F20029F12A95E9F02250F1F0225099F02A95C8
-:1078020049F0225061F02A9581F02A95E1F02A95FB
-:10781200E9F023C0003809F44FC00C94833B0038D0
-:10782200E1F7C8C00023C9F71EC00023B1F72DC07D
-:10783200033098F744C1033080F70BC1003868F376
-:10784200033858F7C9C0013841F77BC1013051F400
-:10785200FCD0BFD000FD06C0FCCF0E94833B0023BA
-:1078620009F41ED008951091E3001078DCD00F7750
-:10787200012B0093E300E9D0ACD000FFFDCF0091D3
-:10788200E30000680093E300089591D0123040F4C1
-:107892000FD010931E02DAD000911E020C94CB3B43
-:1078A2000091EB0001D004C000620093EB00089548
-:1078B2000091E800077FC0C0BA93AA93229700E024
-:1078C2000093190274D0AFD0202F2A9519F02A956F
-:1078D200E9F022C002E100931A020FE210E7E7E1A9
-:1078E200F2E0008311839DD008839DD00983E0DFFD
-:1078F20000911A0210E02881398102171307A8F4B7
-:107902000F7181F401E00093190211C002E10093AA
-:107912001A0201E410E7E3CF0E94CC3B002319F7DF
-:107922008ED040C01093190202C020931A027ED05A
-:10793200A7E1B2E001C08AD000911A02002309F146
-:1079420048D004FD1EC045D000FD03C042D004FF54
-:10795200FACF10E0012F1395003281F0ED91FC91E6
-:107962001197049133D02D913C912F5F3F4F3C935F
-:107972002E93FD0103810A95038361F72AD004FF48
-:10798200DACF00911902013039F423D004FD04C08A
-:1079920020D000FFFDCF5AD01CD004FFFDCF46D02F
-:1079A20018D00B7F49D02296A991B99108951091D0
-:1079B200F10008957DDF00911E0208D047D009D062
-:1079C2000F773AD006D002FFFDCFBFC00093F1007F
-:1079D20008950091E800089524D010911D021058D6
-:1079E20029F01A9589F01A9591F019C061DF00917A
-:1079F2001C02ECDF00E0EADF29D0EBDF02FFFDCF63
-:107A020018D0E7DF0F770CC053DF00E0F2CF51D080
-:107A12000F7710E0F801E55EFD4F0081EACF0FD04D
-:107A22000BC001D000D00091F1000895D2DF0F7E8B
-:107A320003C00091E8000B7F0093E80008950091D5
-:107A4200EB0032DFC6DF077F089532DFC2DF0E7F31
-:107A5200F3CF00911D02002329F00A9509F10A953E
-:107A620031F01EC0E0DF0A9561D0D9F41AC061D0AE
-:107A7200B9F4D9DF0F7711F416D01BD00093E900C7
-:107A82001091EB0010FF0BC00ED010E01093E90034
-:107A920021E0F801E55EFD4F20834FD003C042D0C4
-:107AA20045D0CFDFC9CF1091EB0010621093EB00ED
-:107AB20008951091E800177F1093E800089500914F
-:107AC2001D02002311F4AFDF02C0013011F4B7DF51
-:107AD200B3CF023031F52DD019F52091F1002F7777
-:107AE2002093E90023D000FF19C081F01FD000616C
-:107AF200DCDE01E010E0422F0E949F3E0093EA008C
-:107B020000E00093EA0012D00860CFDE0BD030E034
-:107B1200F901E55EFD4F008310D0DACF03D0D7CF55
-:107B2200BFDE089500E00093E90008950091EB00A4
-:107B3200089579DF3CDF00230895BADE4ADF0E7F25
-:107B4200089583DF46DF02FFFDCF73DF42DF0F7749
-:107B520073CF0091D70001600093D7000E948B3849
-:107B620000E000931F0208950C94BF388A93FA93A1
-:107B7200EA933A922A921A920A927A936A935A93BF
-:107B82004A933A932A931A930A938FB70091DA0091
-:107B920000FF24C00091D80000FF20C00EEF009328
-:107BA200DA000091D90000FF11C001E000930D013D
-:107BB200ABD0026096D09AD00860A2D00E949B38C7
-:107BC2000091E0000E7F0093E00008C000E0009307
-:107BD2000D0100931E0298D0046083D07FD002FF73
-:107BE20005C084D002FF02C00BEF75D077D000FF32
-:107BF2001BC07CD000FF18C001E000930E016AD0C8
-:107C020083D000626ED00EEF6FD0006179D06ED05B
-:107C12000F7D76D00091D80000620093D80009B59C
-:107C22000D7F09BD00E009BD59D004FF20C05ED020
-:107C320004FF1DC009B500FD05C00E94EB3809B55F
-:107C420000FFFDCF0091D8000F7D0093D80042D0F5
-:107C520000910E01002359F04CD00FEE45D00F7E5B
-:107C620052D000643ED042D001604AD042D036D0D9
-:107C720005FF0FC03BD005FF0CC000E000930E01D2
-:107C820035D00F7E3DD00FED2FD00F7D3CD0006858
-:107C920028D024D003FF0DC029D003FF0AC000E082
-:107CA20000931F0207EF17D00E94743B2DD0116082
-:107CB20018D08FBF09911991299139914991599100
-:107CC200699179910990199029903990E991F991E6
-:107CD200899118950FEE0093E10008950091E1005B
-:107CE20008951183008308950093E1000091E2005A
-:107CF20008950091E200006203D00091E200086062
-:107D02000093E2000895FCDFE0E2F2E000811181DD
-:107D1200089500008895FECF01E60DBF02E00EBF78
-:107D2200C2EED2E00E947438002311F00E94D33ECA
-:107D32000E9465380E948A3E0C948A3E4A951AF047
-:107D4200000F111FFBCF0895BA92AA929A928A92BB
-:107D52007A926A925A924A92BA93AA939A938A937D
-:107D62000895BB84AA84998488847F806E805D8014
-:107D72004C80BB81AA8199818881F0E00FB6F8948A
-:107D8200CE0FDF1F0FBE089520E006D0E9F7089559
-:107D9200259102D0E9F708952D9301501040202F2C
-:107DA200212B089585E890E7FC0105911491FC01CF
-:107DB2003296A591B491FC01349625913491422FCB
-:107DC200432B19F0F901E4DF01C0DEDF069610E76C
-:107DD2008139910748F308952F930CD02F9101D048
-:107DE20008953CD0F12FE02F45E047BFE89536D00B
-:107DF20012D0089533D0F12FE02F43E047BFE8952A
-:107E02002DD008952BD0F12FE02F43E047BFE89506
-:107E120025D001D0089522D041E147BFE8951EC088
-:107E22001DD0F12FE02F41E247BFC895002D16C0AB
-:107E320015D0F12FE02F49E047BFC895002D0EC0A5
-:107E4200F32FE22F012E102E41E047BFE89506C026
-:107E520005D0002E29E027BFE89500C0022E27B7E3
-:107E620020FDFCCF202D0895022E27B726FDFCCF42
-:107E7200202D08950E94A53E22974801C901DA01EA
-:107E820010C05BD001E0A00E00E0B01E00E4A0161E
-:107E920000E0B00608F440C0830120E030E00E9418
-:107EA200F23E0A2F0B2B09F440C0082F0F7710E087
-:107EB2002C01401A510A320100E4A02E03C00A2FFD
-:107EC2000B2BE1F04816590680F0F40101914F01A5
-:107ED2000983119729F001914F010883119711C06D
-:107EE200F2013196049108830CC0F20104910983D6
-:107EF2003196E817F907A1F7F401EDCF1BD00883FB
-:107F020019839201088119810E94213F16D0AA94F7
-:107F1200B1F62301AA24BB240DD0312F0F3F3F4FCE
-:107F220009F4AFCF83011DD0B7CF01E02296ECE078
-:107F32000C94B23E82010C945F3802E0400E00E0E5
-:107F4200501E08959A938A9380E090E08C0109D0A4
-:107F520080589F4F8F3F0FE69007C0F38991999108
-:107F6200089520E030E00C94FB3E00000000000089
-:067F720000000000FC000D
-:107FE4000C94ED3E0C94113F0C94193F0C94213FDA
-:0C7FF4000C94F23E0C94033F0C94293FC7
-:040000030000700089
-:00000001FF
+:020000020000FC
+:047000000C948D3E21
+:047028000C94B73DD0
+:10702F0012010002FF010020EB03F42F0000010208
+:10703F00030109021200010100803209040000005F
+:10704F00000000000C03410054004D0045004C00AF
+:10705F001603410054006D00330032005500340018
+:10706F004400460055000C0331002E0030002E0066
+:10707F0030000403090416010C0100000C0000018C
+:02708F006C7F14
+:1070920012BD01BDF89A00B5089501E00895F9996D
+:1070A200FECF12BD01BD20BDFA9AF99AF6CFF99929
+:1070B200FECF0C944938F80104910895F8013491F7
+:1070C20031962491890108950091610000930C0189
+:1070D20000E80093610001E00093610005BF02E057
+:1070E20005BF0C9486380091D70001600093D70049
+:1070F200A89507EF04BF0091600000610093600053
+:1071020000E00093600001E008950E94AA3D0E9401
+:10711200B53DFDCF0CD00F7708D0006806D00061D6
+:1071220004D0016028D0789408950093D80000918B
+:10713200D8000895FCDF00621ED04CD009B500FFD4
+:10714200FDCFF5DF0F7D17D00091E0000E7F009399
+:10715200E0000091E000077F0093E0000091E20070
+:1071620001600093E2000091E20008600093E200F7
+:1071720078940C94743B0093D800089500910D010B
+:10718200002359F40091D90000FF07C0D0DF006846
+:10719200F2DF01E000930D01CDDFE0E2F2E00081D9
+:1071A200018100FF0DC0008111811E7F11830083C8
+:1071B20001E00093EA0000E00093EA0000931E025F
+:1071C20000E00093E9000091E80003FF02C00E9482
+:1071D200F23B0895A89539D000E40093600000E0E6
+:1071E200009381000093800010E0009385000093DB
+:1071F200840001E006BB00918100036000938100DE
+:107202000091600007FFFCCF00E80093600010933C
+:107212008100A89507EF04BF18D010936000209159
+:1072220084003091850010938100109380001093A8
+:1072320085001093840001E006BB2D3D354010F01F
+:1072420002E101C002E009BD089500916000006101
+:107252000093600008950E94AD3E239741D100E063
+:1072620000930901B5D104811581012B51F437D165
+:1072720000910701002309F4B9C000E0009307015F
+:10728200B5C058D102FFFDCF37D1068335D1009367
+:107292000F0132D1009310012FD1009311012CD193
+:1072A2000093120129D10093130102852091130149
+:1072B20030911201409111015091100116811A95DD
+:1072C20041F01250A9F01A9599F11A9509F473C078
+:1072D2008BC010910F01113011F411E001C010E0C8
+:1072E200138799D00C3F11F414D17FC077D17DC0A0
+:1072F20092D010910F01112329F01A9549F01A9595
+:10730200A9F073C010E013870C3F09F06EC0ECCFF8
+:1073120056D103C04CD109F468C00D911C9144D1DF
+:107322000F3FC1F305E0009309015FC011E0EBCF0D
+:10733200D2D029F00250E1F10A9541F056C0FDD0B9
+:107342000E94A33F0FEF00930A014FC0552319F08B
+:107352005A9579F04AC04ED00DEF04BF74D0EAD0EE
+:1073620003FFFDCF67D051D04AD008E00093600000
+:10737200FFCF40D068D0DED003FFFDCF5BD03FD03F
+:1073820044D00FEF1FE004C009811A810150104060
+:1073920009831A8309811A81012BB1F700E800934E
+:1073A200610000910C01009361000C940000FFCF7A
+:1073B20001E003871AC08FD019F00A9539F015C081
+:1073C200535098F4BAD002E000870FC0505339F0FE
+:1073D2005A9541F05F52B1F35A95A1F306C002E00B
+:1073E2000883F0CF01E0FCCFA8D079D02396E4E067
+:1073F2000C94BA3E01E005BF00E005BF089500917C
+:10740200D8000F770093D800089509B50D7F09BD04
+:1074120000E009BD08955183408333832283109194
+:10742200E8001B7F1093E8001091E8001F7710938B
+:10743200E80008955DD053D0F8940091E000016017
+:107442000093E000089579D04AC0219749D0009175
+:107452000601035019F00250B9F00BC03CD021F0E4
+:107462000A9559F00A9529F400910A010C3F19F482
+:1074720050D02196089567D0FCCF0091010100936E
+:10748200F100009100010AC01091100124D019F0FE
+:107492000A9549F0EECF135018F400E00093F10082
+:1074A2001ED044D0E6CF105339F01A9539F01F524E
+:1074B20041F01A9541F0F4CF08E5F0CF00E006D094
+:1074C200EDCF02E0FCCF04E001D0E8CF10E020E0F5
+:1074D20030E00C94113F00910F010023089521C068
+:1074E2000BD008D007D00093040106D00093050109
+:1074F20021D00BC000D008830091F10008950091C3
+:10750200EB0000620093EB0015D0077F0093E800C8
+:107512000895F5DF02E00093080103E000930901FA
+:10752200089559D007D000FFFDCF089503D002FF80
+:10753200FDCF03C00091E8000895FCDF0B7FE6DF7A
+:10754200F9DF0F77E3CF0E94AC3E42D038D006C0BD
+:107552002BD00093F1002BD059F43DD0082F092BEA
+:10756200A9F0E8DF02FD12C0E5DF00FFFDCF4424F1
+:10757200042D4394003289F300910B0100230D91F5
+:107582001C9131F311970E945838E3CFD3DF00FFEB
+:10759200FDCF21D0CFDF00FFFDCFCCDF02FFFDCF3B
+:1075A200CCDFE5E00C94B93E11970C945C380D9158
+:1075B2001C910F5F1F4F1C930E93019708958281B8
+:1075C200938100811181801B910B0196DF01089547
+:1075D200E0E0F1E00895AEDF0E7F98CF0E94A93E71
+:1075E200F7DF80819181A081B181AF710481158122
+:1075F20000521040048315830AC000910B0100233E
+:1076020031F4A301920103E911E00E943B3F47D00C
+:10761200B8F1662477242C0111C06EDFF301ED5618
+:10762200FE4F008301E0600E00E0701E01960091A3
+:10763200F200002311F033D0B8F47FDF30D0E8F24B
+:10764200F301B096E238F040C0F674DF02FFFDCFDE
+:107652000091F200BDDF24813581201B304024835C
+:107662003583E5CF49DFAA95AA23E1F700910B0103
+:10767200013099F62091F1008C010E945038D6CF4A
+:1076820004811581012B21F055DF02FFFDCF55DF6B
+:10769200A2DF50DF00FFFDCFE8E00C94B63EE0E051
+:1076A200F1E0028113810817190708952091EB0078
+:1076B20021602093EB000093EC000091ED0002703A
+:1076C200012B0093ED000091ED0002600093ED00AC
+:1076D2001091EE00012F000F00E0001F0895412FCE
+:1076E2000093E900089500E009D000FD05C000E024
+:1076F200F7DF10E202E0DACF00E00895F1DF009157
+:10770200EB0008950F770132A9F5112369F11A955B
+:1077120059F01A9561F01A9569F01A95F9F01A95CF
+:10772200C1F01A95D9F024C00E942C3920C00E94C1
+:10773200263A1DC029D00091090123D001E01FD0B3
+:1077420020D0009108011BD00E94923A0E94973AE1
+:107752000EC01AD00091080114D007C002E00093B5
+:10776200080100E0009309010FD00E94923A03C081
+:107772000E94803A02C001E0089500E0089501D01D
+:1077820000E00093F10008950091E800077F009364
+:10779200E800089508950350F9F4112339F01A9579
+:1077A20051F01A9581F01A9599F016C004E016D09E
+:1077B20001E810E703C011D003E510E7E7E1F2E0CA
+:1077C20000831183D8CF06E109D00FE510E7F6CF89
+:1077D20004D005E710E7F2CFD0CF0CE000931A02F5
+:1077E200089527D120D100931D02E1D0212F11232A
+:1077F20029F12A95E9F02250F1F0225099F02A95C8
+:1078020049F0225061F02A9581F02A95E1F02A95FB
+:10781200E9F023C0003809F44FC00C94833B0038D0
+:10782200E1F7C8C00023C9F71EC00023B1F72DC07D
+:10783200033098F744C1033080F70BC1003868F376
+:10784200033858F7C9C0013841F77BC1013051F400
+:10785200FCD0BFD000FD06C0FCCF0E94833B0023BA
+:1078620009F41ED008951091E3001078DCD00F7750
+:10787200012B0093E300E9D0ACD000FFFDCF0091D3
+:10788200E30000680093E300089591D0123040F4C1
+:107892000FD010931E02DAD000911E020C94CB3B43
+:1078A2000091EB0001D004C000620093EB00089548
+:1078B2000091E800077FC0C0BA93AA93229700E024
+:1078C2000093190274D0AFD0202F2A9519F02A956F
+:1078D200E9F022C002E100931A020FE210E7E7E1A9
+:1078E200F2E0008311839DD008839DD00983E0DFFD
+:1078F20000911A0210E02881398102171307A8F4B7
+:107902000F7181F401E00093190211C002E10093AA
+:107912001A0201E410E7E3CF0E94CC3B002319F7DF
+:107922008ED040C01093190202C020931A027ED05A
+:10793200A7E1B2E001C08AD000911A02002309F146
+:1079420048D004FD1EC045D000FD03C042D004FF54
+:10795200FACF10E0012F1395003281F0ED91FC91E6
+:107962001197049133D02D913C912F5F3F4F3C935F
+:107972002E93FD0103810A95038361F72AD004FF48
+:10798200DACF00911902013039F423D004FD04C08A
+:1079920020D000FFFDCF5AD01CD004FFFDCF46D02F
+:1079A20018D00B7F49D02296A991B99108951091D0
+:1079B200F10008957DDF00911E0208D047D009D062
+:1079C2000F773AD006D002FFFDCFBFC00093F1007F
+:1079D20008950091E800089524D010911D021058D6
+:1079E20029F01A9589F01A9591F019C061DF00917A
+:1079F2001C02ECDF00E0EADF29D0EBDF02FFFDCF63
+:107A020018D0E7DF0F770CC053DF00E0F2CF51D080
+:107A12000F7710E0F801E55EFD4F0081EACF0FD04D
+:107A22000BC001D000D00091F1000895D2DF0F7E8B
+:107A320003C00091E8000B7F0093E80008950091D5
+:107A4200EB0032DFC6DF077F089532DFC2DF0E7F31
+:107A5200F3CF00911D02002329F00A9509F10A953E
+:107A620031F01EC0E0DF0A9561D0D9F41AC061D0AE
+:107A7200B9F4D9DF0F7711F416D01BD00093E900C7
+:107A82001091EB0010FF0BC00ED010E01093E90034
+:107A920021E0F801E55EFD4F20834FD003C042D0C4
+:107AA20045D0CFDFC9CF1091EB0010621093EB00ED
+:107AB20008951091E800177F1093E800089500914F
+:107AC2001D02002311F4AFDF02C0013011F4B7DF51
+:107AD200B3CF023031F52DD019F52091F1002F7777
+:107AE2002093E90023D000FF19C081F01FD000616C
+:107AF200DCDE01E010E0422F0E949F3E0093EA008C
+:107B020000E00093EA0012D00860CFDE0BD030E034
+:107B1200F901E55EFD4F008310D0DACF03D0D7CF55
+:107B2200BFDE089500E00093E90008950091EB00A4
+:107B3200089579DF3CDF00230895BADE4ADF0E7F25
+:107B4200089583DF46DF02FFFDCF73DF42DF0F7749
+:107B520073CF0091D70001600093D7000E948B3849
+:107B620000E000931F0208950C94BF388A93FA93A1
+:107B7200EA933A922A921A920A927A936A935A93BF
+:107B82004A933A932A931A930A938FB70091DA0091
+:107B920000FF24C00091D80000FF20C00EEF009328
+:107BA200DA000091D90000FF11C001E000930D013D
+:107BB200ABD0026096D09AD00860A2D00E949B38C7
+:107BC2000091E0000E7F0093E00008C000E0009307
+:107BD2000D0100931E0298D0046083D07FD002FF73
+:107BE20005C084D002FF02C00BEF75D077D000FF32
+:107BF2001BC07CD000FF18C001E000930E016AD0C8
+:107C020083D000626ED00EEF6FD0006179D06ED05B
+:107C12000F7D76D00091D80000620093D80009B59C
+:107C22000D7F09BD00E009BD59D004FF20C05ED020
+:107C320004FF1DC009B500FD05C00E94EB3809B55F
+:107C420000FFFDCF0091D8000F7D0093D80042D0F5
+:107C520000910E01002359F04CD00FEE45D00F7E5B
+:107C620052D000643ED042D001604AD042D036D0D9
+:107C720005FF0FC03BD005FF0CC000E000930E01D2
+:107C820035D00F7E3DD00FED2FD00F7D3CD0006858
+:107C920028D024D003FF0DC029D003FF0AC000E082
+:107CA20000931F0207EF17D00E94743B2DD0116082
+:107CB20018D08FBF09911991299139914991599100
+:107CC200699179910990199029903990E991F991E6
+:107CD200899118950FEE0093E10008950091E1005B
+:107CE20008951183008308950093E1000091E2005A
+:107CF20008950091E200006203D00091E200086062
+:107D02000093E2000895FCDFE0E2F2E000811181DD
+:107D1200089500008895FECF01E60DBF02E00EBF78
+:107D2200C2EED2E00E947438002311F00E94D33ECA
+:107D32000E9465380E948A3E0C948A3E4A951AF047
+:107D4200000F111FFBCF0895BA92AA929A928A92BB
+:107D52007A926A925A924A92BA93AA939A938A937D
+:107D62000895BB84AA84998488847F806E805D8014
+:107D72004C80BB81AA8199818881F0E00FB6F8948A
+:107D8200CE0FDF1F0FBE089520E006D0E9F7089559
+:107D9200259102D0E9F708952D9301501040202F2C
+:107DA200212B089585E890E7FC0105911491FC01CF
+:107DB2003296A591B491FC01349625913491422FCB
+:107DC200432B19F0F901E4DF01C0DEDF069610E76C
+:107DD2008139910748F308952F930CD02F9101D048
+:107DE20008953CD0F12FE02F45E047BFE89536D00B
+:107DF20012D0089533D0F12FE02F43E047BFE8952A
+:107E02002DD008952BD0F12FE02F43E047BFE89506
+:107E120025D001D0089522D041E147BFE8951EC088
+:107E22001DD0F12FE02F41E247BFC895002D16C0AB
+:107E320015D0F12FE02F49E047BFC895002D0EC0A5
+:107E4200F32FE22F012E102E41E047BFE89506C026
+:107E520005D0002E29E027BFE89500C0022E27B7E3
+:107E620020FDFCCF202D0895022E27B726FDFCCF42
+:107E7200202D08950E94A53E22974801C901DA01EA
+:107E820010C05BD001E0A00E00E0B01E00E4A0161E
+:107E920000E0B00608F440C0830120E030E00E9418
+:107EA200F23E0A2F0B2B09F440C0082F0F7710E087
+:107EB2002C01401A510A320100E4A02E03C00A2FFD
+:107EC2000B2BE1F04816590680F0F40101914F01A5
+:107ED2000983119729F001914F010883119711C06D
+:107EE200F2013196049108830CC0F20104910983D6
+:107EF2003196E817F907A1F7F401EDCF1BD00883FB
+:107F020019839201088119810E94213F16D0AA94F7
+:107F1200B1F62301AA24BB240DD0312F0F3F3F4FCE
+:107F220009F4AFCF83011DD0B7CF01E02296ECE078
+:107F32000C94B23E82010C945F3802E0400E00E0E5
+:107F4200501E08959A938A9380E090E08C0109D0A4
+:107F520080589F4F8F3F0FE69007C0F38991999108
+:107F6200089520E030E00C94FB3E00000000000089
+:067F720000000000FC000D
+:107FE4000C94ED3E0C94113F0C94193F0C94213FDA
+:0C7FF4000C94F23E0C94033F0C94293FC7
+:040000030000700089
+:00000001FF