Initial unorthodox support

build_keyboard.mk

@@ -16,7 +16,6 @@ include common.mk
 KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
 TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
 KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
-STM32_PATH := quantum/stm32
 
 # Force expansion
 TARGET := $(TARGET)
@@ -69,7 +68,6 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
     KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
 endif
 
-
 # Pull in rules.mk files from all our subfolders
 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
     include $(KEYBOARD_PATH_5)/rules.mk
@@ -87,19 +85,6 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
     include $(KEYBOARD_PATH_1)/rules.mk
 endif
 
-ifeq ($(strip $(PROTON)), yes)
-    OPT_DEFS += -DPROTON_CONVERSION
-    include $(STM32_PATH)/proton_c.mk
-endif
-
-include quantum/mcu_selection.mk
-
-ifdef MCU_FAMILY
-    OPT_DEFS += -DQMK_STM32
-    KEYBOARD_PATHS += $(STM32_PATH)
-endif
-
-
 # Find all the C source files to be compiled in subfolders.
 KEYBOARD_SRC :=
 

docs/_sidebar.md

@@ -39,7 +39,6 @@
   * [Glossary](reference_glossary.md)
   * [Unit Testing](unit_testing.md)
   * [Useful Functions](ref_functions.md)
-  * [Configurator Support](reference_configurator_support.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)

docs/_summary.md

@@ -39,7 +39,6 @@
   * [Glossary](reference_glossary.md)
   * [Unit Testing](unit_testing.md)
   * [Useful Functions](ref_functions.md)
-  * [Configurator Support](reference_configurator_support.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)

docs/config_options.md

@@ -261,32 +261,3 @@ Use these to enable or disable building certain features. The more you have enab
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.
-
-## USB Endpoint Limitations
-
-In order to provide services over USB, QMK has to use USB endpoints.
-These are a finite resource: each microcontroller has only a certain number.
-This limits what features can be enabled together.
-If the available endpoints are exceeded, a build error is thrown.
-
-The following features can require separate endpoints:
-
-* `MOUSEKEY_ENABLE`
-* `EXTRAKEY_ENABLE`
-* `CONSOLE_ENABLE`
-* `NKRO_ENABLE`
-* `MIDI_ENABLE`
-* `RAW_ENABLE`
-* `VIRTSER_ENABLE`
-
-In order to improve utilisation of the endpoints, the HID features can be combined to use a single endpoint.
-By default, `MOUSEKEY`, `EXTRAKEY`, and `NKRO` are combined into a single endpoint.
-
-The base keyboard functionality can also be combined into the endpoint,
-by setting `KEYBOARD_SHARED_EP = yes`.
-This frees up one more endpoint,
-but it can prevent the keyboard working in some BIOSes,
-as they do not implement Boot Keyboard protocol switching.
-
-Combining the mouse also breaks Boot Mouse compatibility.
-The mouse can be uncombined by setting `MOUSE_SHARED_EP = no` if this functionality is required.

docs/feature_backlight.md

@@ -54,17 +54,14 @@ In this handler, the value of an incrementing counter is mapped onto a precomput
 
 ## Backlight Functions
 
-|Function  |Description                                                |
-|----------|-----------------------------------------------------------|
-|`backlight_toggle()`    |Turn the backlight on or off                 |
-|`backlight_enable()`    |Turn the backlight on                        |
-|`backlight_disable()`   |Turn the backlight off                       |
-|`backlight_step()`      |Cycle through backlight levels               |
-|`backlight_increase()`  |Increase the backlight level                 |
-|`backlight_decrease()`  |Decrease the backlight level                 |
-|`backlight_level(x)`    |Sets the backlight level to specified level  |
-|`get_backlight_level()` |Return the current backlight level           |
-|`is_backlight_enabled()`|Return whether the backlight is currently on |
+|Function  |Description                                               |
+|----------|----------------------------------------------------------|
+|`backlight_toggle()`   |Turn the backlight on or off                 |
+|`backlight_step()`     |Cycle through backlight levels               |
+|`backlight_increase()` |Increase the backlight level                 |
+|`backlight_decrease()` |Decrease the backlight level                 |
+|`backlight_level(x)`   |Sets the backlight level to specified level  |
+|`get_backlight_level()`|Return the current backlight level           |
 
 ### Backlight Breathing Functions
 

docs/feature_rgb_matrix.md

@@ -150,30 +150,6 @@ These are the effects that are currently available:
 	#endif
 	    RGB_MATRIX_EFFECT_MAX
 	};
-    
-You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `config.h`:
-
-
-|Define                                             |Description                                 |
-|---------------------------------------------------|--------------------------------------------|
-|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS`           |Disables `RGB_MATRIX_ALPHAS_MODS`           |
-|`#define DISABLE_RGB_MATRIX_DUAL_BEACON`           |Disables `RGB_MATRIX_DUAL_BEACON`           |
-|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN`      |Disables `RGB_MATRIX_GRADIENT_UP_DOWN`      |
-|`#define DISABLE_RGB_MATRIX_RAINDROPS`             |Disables `RGB_MATRIX_RAINDROPS`             |
-|`#define DISABLE_RGB_MATRIX_CYCLE_ALL`             |Disables `RGB_MATRIX_CYCLE_ALL`             |
-|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`      |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT`      |
-|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN`         |Disables `RGB_MATRIX_CYCLE_UP_DOWN`         |
-|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON`        |Disables `RGB_MATRIX_RAINBOW_BEACON`        |
-|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS`     |Disables `RGB_MATRIX_RAINBOW_PINWHEELS`     |
-|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|
-|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`   |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS`   |
-|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN`          |Disables `RGB_MATRIX_DIGITAL_RAIN`          |
-|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE`        |Disables `RGB_MATRIX_SOLID_REACTIVE`        |
-|`#define DISABLE_RGB_MATRIX_SPLASH`                |Disables `RGB_MATRIX_SPLASH`                |
-|`#define DISABLE_RGB_MATRIX_MULTISPLASH`           |Disables `RGB_MATRIX_MULTISPLASH`           |
-|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH`          |Disables `RGB_MATRIX_SOLID_SPLASH`          |
-|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH`     |Disables `RGB_MATRIX_SOLID_MULTISPLASH`     |
-
 
 ## Custom layer effects
 

docs/keycodes.md

@@ -459,7 +459,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
 |`SH_TT`    |Toggles with a tap; momentary when held.                                 |
-
 ## [Unicode Support](feature_unicode.md)
 
 |Key         |Aliases|                                                 |

docs/reference_configurator_support.md

@@ -1,195 +0,0 @@
-# Supporting Your Keyboard in QMK Configurator
-
-This page covers how to properly support keyboards in the [QMK Configurator](https://config.qmk.fm/).
-
-
-## How the Configurator Understands Keyboards
-
-To understand how the Configurator understands keyboards, first one must understand layout macros. For this exercise, we're going to imagine a 17-key numpad PCB, which we're going to call `numpad`.
-
-```
-┌───┬───┬───┬───┐
-│NLk│ / │ * │ - │
-├───┼───┼───┼───┤
-│7  │8  │9  │ + │
-├───┼───┼───┤   │
-│4  │5  │6  │   │
-├───┼───┼───┼───┤
-│1  │2  │3  │Ent│
-├───┴───┼───┤   │
-│0      │ . │   │
-└───────┴───┴───┘
-```
-
-?> For more on layout macros, see [Understanding QMK: Matrix Scanning](understanding_qmk.md?id=matrix-scanning) and [Understanding QMK: Matrix to Physical Layout Map](understanding_qmk.md?id=matrix-to-physical-layout-map).
-
-The Configurator's API reads the keyboard's `.h` file from `qmk_firmware/keyboards/<keyboard>/<keyboard>.h`. For our numpad, this file would be `qmk_firmware/keyboards/numpad/numpad.h`:
-
-```c
-#pragma once
-
-#define LAYOUT( \
-    k00, k01, k02, k03, \
-    k10, k11, k12, k13, \
-    k20, k21, k22,      \
-    k30, k31, k32, k33, \
-    k40,      k42       \
-  ) { \
-    { k00, k01,   k02, k03   }, \
-    { k10, k11,   k12, k13   }, \
-    { k20, k21,   k22, KC_NO }, \
-    { k30, k31,   k32, k33   }, \
-    { k40, KC_NO, k42, KC_NO }  \
-}
-```
-
-QMK uses `KC_NO` to designate places in the switch matrix where there is no switch. Sometimes, `XXX`, `___` or `____` are used as shorthand to make this section easier to read if it needs to be debugged. This is usually defined near the beginning of the `.h` file:
-
-```c
-#pragma once
-
-#define XXX KC_NO
-
-#define LAYOUT( \
-    k00, k01, k02, k03, \
-    k10, k11, k12, k13, \
-    k20, k21, k22,      \
-    k30, k31, k32, k33, \
-    k40,      k42       \
-  ) { \
-    { k00, k01, k02, k03 }, \
-    { k10, k11, k12, k13 }, \
-    { k20, k21, k22, XXX }, \
-    { k30, k31, k32, k33 }, \
-    { k40, XXX, k42, XXX }  \
-}
-```
-
-!> This usage differs from that of keymap macros, which almost always use `XXXXXXX` (seven capital X's) for `KC_NO` and `_______` (seven underscores) for `KC_TRNS`.
-
-!> To prevent user confusion, using `KC_NO` is preferred.
-
-The layout macro tells the Configurator that our keyboard has 17 keys, arranged in five rows of four columns each. Our switch positions are named `k<row><column>`, counting from 0. The names themselves actually don't matter, as long as they match between the top section, which receives the keycodes from the keymap, and the bottom half which designates where each key is in the matrix.
-
-To display our keyboard in a way that resembles the physical keyboard, we need to build a JSON file that tells the Configurator how to tie the physical locations and sizes of our keys to our switch matrix.
-
-## Building the JSON file
-
-To build the JSON file, the easiest way is to build the layout in [Keyboard Layout Editor](http://www.keyboard-layout-editor.com/) ("KLE"), from which we'll feed the Raw Data into a QMK tool that converts this data into a JSON the Configurator will read and use. Since KLE opens by default with a numpad layout, we're just going to remove the Getting Started instructions, and use what's left.
-
-Once the layout is as desired, move to the Raw Data tab in KLE, and copy the contents:
-
-```
-["Num Lock","/","*","-"],
-["7\nHome","8\n↑","9\nPgUp",{h:2},"+"],
-["4\n←","5","6\n→"],
-["1\nEnd","2\n↓","3\nPgDn",{h:2},"Enter"],
-[{w:2},"0\nIns",".\nDel"]
-```
-
-To convert this data into our JSON, go to the [QMK KLE-JSON Converter](https://qmk.fm/converter/), paste the Raw Data into the Input field, and click the Convert button. After a moment, our JSON data will appear in the Output field. Copy the contents to a new text document, and name the document `info.json`, saving it in the same folder that contains `numpad.h`.
-
-Use the `keyboard_name` object to set the name of the keyboard. The `bootloader` object is deprecated, so it can be deleted. For instruction purposes, we will put each key's object on its own line. This is only to make the file more human-readable, and does not affect the Configurator's functionality.
-
-```json
-{
-    "keyboard_name": "Numpad",
-    "url": "",
-    "maintainer": "qmk",
-    "tags": {
-        "form_factor": "numpad"
-    },
-    "width": 4,
-    "height": 5,
-    "layouts": {
-        "LAYOUT": {
-            "layout": [
-                {"label":"Num Lock", "x":0, "y":0},
-                {"label":"/", "x":1, "y":0},
-                {"label":"*", "x":2, "y":0},
-                {"label":"-", "x":3, "y":0},
-                {"label":"7", "x":0, "y":1},
-                {"label":"8", "x":1, "y":1},
-                {"label":"9", "x":2, "y":1},
-                {"label":"+", "x":3, "y":1, "h":2},
-                {"label":"4", "x":0, "y":2},
-                {"label":"5", "x":1, "y":2},
-                {"label":"6", "x":2, "y":2},
-                {"label":"1", "x":0, "y":3},
-                {"label":"2", "x":1, "y":3},
-                {"label":"3", "x":2, "y":3},
-                {"label":"Enter", "x":3, "y":3, "h":2},
-                {"label":"0", "x":0, "y":4, "w":2},
-                {"label":".", "x":2, "y":4}
-            ]
-        }
-    }
-}
-```
-
-The `layouts` object contains the data that represents the physical layout of the keyboard. It has an object `LAYOUT`, which needs to match the name of our layout macro from `numpad.h`. The `LAYOUT` object itself has an object named `layout`, which contains one JSON object for each physical key on our keyboard, formatted as follows:
-
-```
-  ┌ The name of the key. Not displayed in the Configurator.
-  │                   ┌ The key's X-axis location, in key units from the
-  │                   │ keyboard's left edge.
-  │                   │      ┌ The key's Y-axis location, in key units from
-  │                   │      │ the keyboard's top (rear-facing) edge.
-  ↓                   ↓      ↓
-{"label":"Num Lock", "x":0, "y":0},
-```
-
-Some objects will also have `"w"` and `"h"` keys, which represent a key's width and height, respectively.
-
-?> For more on the `info.json` files, see [QMK Keyboard Guidelines: Keyboard Metadata](hardware_keyboard_guidelines.md?id=keyboard-metadata)
-
-
-## How the Configurator Programs Keys
-
-The Configurator's API uses the layout macro and the JSON file we've given it to create a visual representation of the keyboard that has each visual object tied to a specific key, in sequence:
-
-key in layout macro | JSON object used
-:---: | :----
-k00   | {"label":"Num Lock", "x":0, "y":0}
-k01   | {"label":"/", "x":1, "y":0}
-k02   | {"label":"*", "x":2, "y":0}
-k03   | {"label":"-", "x":3, "y":0}
-k10   | {"label":"7", "x":0, "y":1}
-k11   | {"label":"8", "x":1, "y":1}
-k12   | {"label":"9", "x":2, "y":1}
-k13   | {"label":"+", "x":3, "y":1, "h":2}
-k20   | {"label":"4", "x":0, "y":2}
-k21   | {"label":"5", "x":1, "y":2}
-k22   | {"label":"6", "x":2, "y":2}
-k30   | {"label":"1", "x":0, "y":3}
-k31   | {"label":"2", "x":1, "y":3}
-k32   | {"label":"3", "x":2, "y":3}
-k33   | {"label":"Enter", "x":3, "y":3, "h":2}
-k40   | {"label":"0", "x":0, "y":4, "w":2}
-k42   | {"label":".", "x":2, "y":4}
-
-When a user selects the top-left key in the Configurator, and assigns Num Lock to it, the Configurator builds a keymap file with `KC_NLCK` as the first key, and so on as the keymap is built. The `label` keys are not used; they are only for the user's reference in identifying specific keys when debugging the `info.json` file.
-
-
-## Issues and Hazards
-
-Currently, the Configurator does not support key rotation or non-rectangular key shapes like ISO Enter. Additionally, keys that are vertically-offset from their "row" &mdash; the arrow keys on 1800-layouts like the [TKC1800](https://github.com/qmk/qmk_firmware/tree/4ac48a61a66206beaf2fdd5f2939d8bbedd0004c/keyboards/tkc1800/) being a prominent example &mdash; confuse the KLE-to-JSON Converter, if not adjusted for by the contributor of the `info.json` file.
-
-### Workarounds
-
-#### Non-rectangular keys
-
-For ISO Enter keys, QMK custom is to display it as a rectangular key, 1.25u wide and 2u high, aligned so its right edge is aligned with the right edge of the alphanumeric key block.
-
-![](https://i.imgur.com/JKngtTw.png)  
-*A 60% keyboard in standard ISO layout, as rendered by QMK Configurator.*
-
-#### Vertically-offset keys
-
-For vertically-offset keys, place them in KLE as if they were not offset, then edit the Y-values as needed in the converted JSON file
-
-![](https://i.imgur.com/fmDvDzR.png)  
-*An 1800-layout keyboard as rendered in Keyboard Layout Editor, without the vertical offset applied to the arrow keys.*
-
-![](https://i.imgur.com/8beYMBR.png)  
-*A Unix diff file, showing the changes needed to vertically-offset the arrow keys in our keyboard's JSON file.*

keyboards/40percentclub/luddite/info.json

@@ -1,12 +0,0 @@
-{
-    "keyboard_name": "foobar",
-    "url": "",
-    "maintainer": "qmk",
-    "width": 15,
-    "height": 5,
-    "layouts": {
-      "LAYOUT_60_ansi": {
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
-      }
-    }
-}

keyboards/40percentclub/mf68/keymaps/68keys/config.h

@@ -1,15 +0,0 @@
-#pragma once
-
-/* USB Device descriptor parameter */
-#undef VENDOR_ID
-#undef PRODUCT_ID
-#undef DEVICE_VER
-#undef MANUFACTURER
-#undef PRODUCT
-#undef DESCRIPTION
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x0A0C
-#define DEVICE_VER 0x0068
-#define MANUFACTURER 68Keys.io
-#define PRODUCT The 68Keys.io Keyboard
-#define DESCRIPTION A 68 keys mechanical keyboard

keyboards/40percentclub/mf68/keymaps/68keys/keymap.c

@@ -1,11 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_68_ansi(
-    KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC, KC_PGUP,
-    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN,
-    KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
-    KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
-    KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
-  )
-};

keyboards/40percentclub/mf68/keymaps/68keys/rules.mk

@@ -1,5 +0,0 @@
-BOOTLOADER = atmel-dfu
-
-EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = no
-BACKLIGHT_ENABLE = no

keyboards/68keys/68keys.c

@@ -0,0 +1,6 @@
+#include "68keys.h"
+
+void matrix_init_kb(void)
+{
+	matrix_init_user();
+}

keyboards/68keys/68keys.h

@@ -0,0 +1,20 @@
+#include "quantum.h"
+
+#define LAYOUT_68_ansi(                                                             \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14, K15, K16, \
+    K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32, K33, K34, \
+    K35, K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47, K48,                \
+    K50, K51, K52, K53, K54, K55, K56, K57, K58, K60, K61, K62, K63,                \
+    K64, K65, K66, K67, K68, K70, K71, K72, K73, K74)                               \
+    {                                                                               \
+        {K00, K01, K02, K03, K04, K05, K06, K07, K08},                              \
+            {K10, K11, K12, K13, K14, K15, K16, K17, K18},                          \
+            {K20, K21, K22, K23, K24, K25, K26, K27, K28},                          \
+            {K30, K31, K32, K33, K34, K35, K36, K37, K38},                          \
+            {K40, K41, K42, K43, K44, K45, K46, K47, K48},                          \
+            {K50, K51, K52, K53, K54, K55, K56, K57, K58},                          \
+            {K60, K61, K62, K63, K64, K65, K66, K67, K68},                          \
+        {                                                                           \
+            K70, K71, K72, K73, K74                                                 \
+        }                                                                           \
+    }

keyboards/68keys/README.md

@@ -2,22 +2,22 @@
 
 Custom [68Keys.io](https://68keys.io) DIY keyboard.
 
-Keymap Maintainer: [sbstjn](https://sbstjn.com)
-Hardware Supported: mf68
+Keyboard Maintainer: [sbstjn](https://sbstjn.com)  
+Hardware Supported: Pro Micro  
 Hardware Availability: [DIY Guide](https://68keys.io)
 
 Make example for this keyboard (after setting up your build environment):
 
 ```bash
 $ > cd qmk_firmware/
-$ > make 40percentclub/mf68:68keys
+$ > make 68keys:default
 ```
 
 Example of flashing this keyboard:
 
 ```bash
 $ > cd qmk_firmware/
-$ > make 40percentclub/mf68:68keys:avrdude
+$ > make 68keys:default:avrdude
 ```
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/68keys/config.h

@@ -0,0 +1,42 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0A0C
+#define DEVICE_VER 0x0068
+#define MANUFACTURER 68Keys.io
+#define PRODUCT The 68Keys.io Keyboard
+#define DESCRIPTION A 68 keys mechanical keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 9
+
+#define MATRIX_ROW_PINS                \
+    {                                  \
+        B6, B2, B3, B1, F7, F6, F5, F4 \
+    }
+#define MATRIX_COL_PINS                    \
+    {                                      \
+        D3, D2, D1, D0, D4, C6, D7, E6, B4 \
+    }
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/68keys/info.json

@@ -0,0 +1,81 @@
+{
+  "keyboard_name": "68Keys.io",
+  "url": "https://68keys.io",
+  "maintainer": "qmk",
+  "width": 17.25,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_68_ansi": {
+      "layout": [
+        { "label": "~", "x": 0, "y": 0 },
+        { "label": "!", "x": 1, "y": 0 },
+        { "label": "@", "x": 2, "y": 0 },
+        { "label": "#", "x": 3, "y": 0 },
+        { "label": "$", "x": 4, "y": 0 },
+        { "label": "%", "x": 5, "y": 0 },
+        { "label": "^", "x": 6, "y": 0 },
+        { "label": "&", "x": 7, "y": 0 },
+        { "label": "*", "x": 8, "y": 0 },
+        { "label": "(", "x": 9, "y": 0 },
+        { "label": ")", "x": 10, "y": 0 },
+        { "label": "_", "x": 11, "y": 0 },
+        { "label": "+", "x": 12, "y": 0 },
+        { "label": "Backspace", "x": 13, "y": 0, "w": 2 },
+        { "label": "ESC", "x": 15.25, "y": 0 },
+        { "label": "PGUP", "x": 16.25, "y": 0 },
+        { "label": "Tab", "x": 0, "y": 1, "w": 1.5 },
+        { "label": "Q", "x": 1.5, "y": 1 },
+        { "label": "W", "x": 2.5, "y": 1 },
+        { "label": "E", "x": 3.5, "y": 1 },
+        { "label": "R", "x": 4.5, "y": 1 },
+        { "label": "T", "x": 5.5, "y": 1 },
+        { "label": "Y", "x": 6.5, "y": 1 },
+        { "label": "U", "x": 7.5, "y": 1 },
+        { "label": "I", "x": 8.5, "y": 1 },
+        { "label": "O", "x": 9.5, "y": 1 },
+        { "label": "P", "x": 10.5, "y": 1 },
+        { "label": "{", "x": 11.5, "y": 1 },
+        { "label": "}", "x": 12.5, "y": 1 },
+        { "label": "|", "x": 13.5, "y": 1, "w": 1.5 },
+        { "label": "DEL", "x": 15.25, "y": 1 },
+        { "label": "PGDN", "x": 16.25, "y": 1 },
+        { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 },
+        { "label": "A", "x": 1.75, "y": 2 },
+        { "label": "S", "x": 2.75, "y": 2 },
+        { "label": "D", "x": 3.75, "y": 2 },
+        { "label": "F", "x": 4.75, "y": 2 },
+        { "label": "G", "x": 5.75, "y": 2 },
+        { "label": "H", "x": 6.75, "y": 2 },
+        { "label": "J", "x": 7.75, "y": 2 },
+        { "label": "K", "x": 8.75, "y": 2 },
+        { "label": "L", "x": 9.75, "y": 2 },
+        { "label": ":", "x": 10.75, "y": 2 },
+        { "label": "\"", "x": 11.75, "y": 2 },
+        { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 },
+        { "label": "Shift", "x": 0, "y": 3, "w": 2.25 },
+        { "label": "Z", "x": 2.25, "y": 3 },
+        { "label": "X", "x": 3.25, "y": 3 },
+        { "label": "C", "x": 4.25, "y": 3 },
+        { "label": "V", "x": 5.25, "y": 3 },
+        { "label": "B", "x": 6.25, "y": 3 },
+        { "label": "N", "x": 7.25, "y": 3 },
+        { "label": "M", "x": 8.25, "y": 3 },
+        { "label": "<", "x": 9.25, "y": 3 },
+        { "label": ">", "x": 10.25, "y": 3 },
+        { "label": "?", "x": 11.25, "y": 3 },
+        { "label": "Shift", "x": 12.25, "y": 3, "w": 2.75 },
+        { "x": 15.25, "y": 3 },
+        { "label": "CTRL", "x": 0, "y": 4, "w": 1.25 },
+        { "label": "ALT", "x": 1.25, "y": 4, "w": 1.25 },
+        { "label": "GUI", "x": 2.5, "y": 4, "w": 1.25 },
+        { "x": 3.75, "y": 4, "w": 6.25 },
+        { "label": "GUI", "x": 10, "y": 4, "w": 1.25 },
+        { "label": "ALT", "x": 11.25, "y": 4, "w": 1.25 },
+        { "label": "CTRL", "x": 12.5, "y": 4, "w": 1.25 },
+        { "x": 14.25, "y": 4 },
+        { "x": 15.25, "y": 4 },
+        { "x": 16.25, "y": 4 }
+      ]
+    }
+  }
+}

keyboards/68keys/keymaps/default/keymap.c

@@ -0,0 +1,10 @@
+#include QMK_KEYBOARD_H
+#include "68keys.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_68_ansi(
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC, KC_PGUP,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN,
+        KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+        KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT)};

keyboards/68keys/rules.mk

@@ -0,0 +1,22 @@
+LAYOUTS = 68_ansi
+
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+BOOTLOADER = atmel-dfu
+
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration (+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys (+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control (+450)
+CONSOLE_ENABLE = no         # Console for debug (+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+

keyboards/atom47/rev2/rev2.c

@@ -17,9 +17,6 @@ void matrix_scan_kb(void) {
 void led_init_ports(void) {
     // * Set our LED pins as output
     DDRB &= ~(1<<5);
-
-	//Set output high, so the capslock led is off
-	PORTB |= (1 << 5);
 }
 
 void led_set_kb(uint8_t usb_led) {

keyboards/atom47/rev3/rev3.c

@@ -17,9 +17,6 @@ void matrix_scan_kb(void) {
 void led_init_ports(void) {
     // * Set our LED pins as output
     DDRE |= (1 << 6);
-
-	//Set output high, so the capslock led is off
-	PORTE |= (1 << 6);
 }
 
 void led_set_kb(uint8_t usb_led) {

keyboards/bpiphany/pegasushoof/keymaps/default_jis/keymap.c

@@ -1,54 +0,0 @@
-/*
-Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
-          2018 Charlie McMackin <charliemac@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-#define KM_JIS  0
-#define KM_MEDIA 1
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] =
-  {
-   /* Layer 0: Standard JIS layer */
-   [KM_JIS] = LAYOUT_tkl_jis(KC_ESC,          KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12,            KC_PSCR,KC_SLCK,KC_PAUS, \
-                             KC_GRV,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_JYEN, KC_BSPC,  KC_INS, KC_HOME,KC_PGUP, \
-                             KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,                   KC_DEL, KC_END, KC_PGDN, \
-                             KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_BSLS,KC_ENT, \
-                             KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RO,  KC_RSFT,                           KC_UP, \
-                             KC_LCTL, KC_LGUI,KC_LALT,KC_MHEN,        KC_SPC,                 KC_HENK,KC_KANA,KC_RALT,MO(1),  KC_RCTL,                   KC_LEFT,KC_DOWN,KC_RGHT),
-   /* Layer 1: Function layer */
-   [KM_MEDIA] = LAYOUT_tkl_jis(_______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,           KC_WAKE,KC_PWR, KC_SLEP, \
-                               _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,   _______,_______,KC_VOLU, \
-                               _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,                   _______,_______,KC_VOLD, \
-                               _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
-                               _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,                           KC_MPLY, \
-                               _______,_______,_______,_______,        _______,                _______,_______,_______,_______,RESET  ,                   KC_MPRV,KC_MSTP,KC_MNXT)
-  };
-
-void led_set_user(uint8_t usb_led) {
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-    ph_caps_led_on();
-  } else {
-    ph_caps_led_off();
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-    ph_sclk_led_on();
-  } else {
-    ph_sclk_led_off();
-  }
-}

keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk

@@ -1,17 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-CUSTOM_MATRIX = yes         # Custom matrix file for the Pegasus Hoof due to the 2x74HC42
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.

keyboards/bpiphany/pegasushoof/pegasushoof.h

@@ -41,24 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 		/* 7 */  { ___ , ___ , ___ , ___ , ___ , KF7 , KG7 , KH7 , KI7 , KJ7 , KK7 , KL7 , KM7 , KN7 , ___ , KP7 , ___ , ___ }, \
 	}
 
-#define LAYOUT_tkl_jis( \
-  KG6,      KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0,        KN5, KN7, KP7, \
-  KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO7, KO2,   KR4, KC4, KE4, \
-  KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2,             KQ4, KC5, KE5, \
-  KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO3, KO1,                       \
-  KB2, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KL0,      KB3,             KC6,      \
-  KP4, KD2, KN6, KG0,           KQ6,           KH0, KI0, KN0, KM0, KP1,        KC0, KQ0, KR0  \
-  ) { /*        00-A  01-B  02-C  03-D  04-E  05-F  06-G  07-H  08-I  09-J  10-K  11-L  12-M  13-N  14-O  15-P  16-Q  17-R */ \
-     /* 0 */  { ___ , ___ , KC0 , ___ , ___ , KF0 , KG0 , KH0 , KI0 , KJ0 , KK0 , KL0 , KM0 , KN0 , KO0 , ___ , KQ0 , KR0 }, \
-     /* 1 */  { ___ , ___ , ___ , ___ , ___ , ___ , KG1 , KH1 , KI1 , KJ1 , KK1 , KL1 , KM1 , ___ , KO1 , KP1 , ___ , ___ }, \
-     /* 2 */  { ___ , KB2 , ___ , KD2 , ___ , KF2 , KG2 , KH2 , KI2 , KJ2 , KK2 , KL2 , KM2 , ___ , KO2 , ___ , ___ , ___ }, \
-     /* 3 */  { ___ , KB3 , ___ , ___ , ___ , KF3 , KG3 , KH3 , KI3 , KJ3 , KK3 , KL3 , KM3 , ___ , KO3 , ___ , ___ , ___ }, \
-     /* 4 */  { ___ , ___ , KC4 , ___ , KE4 , KF4 , KG4 , KH4 , KI4 , KJ4 , KK4 , KL4 , KM4 , ___ , KO4 , KP4 , KQ4 , KR4 }, \
-     /* 5 */  { ___ , ___ , KC5 , ___ , KE5 , KF5 , KG5 , KH5 , KI5 , KJ5 , KK5 , KL5 , KM5 , KN5 , KO5 , KP5 , ___ , ___ }, \
-     /* 6 */  { ___ , ___ , KC6 , ___ , ___ , KF6 , KG6 , ___ , KI6 , KJ6 , KK6 , KL6 , ___ , KN6 , KO6 , ___ , KQ6 , ___ }, \
-     /* 7 */  { ___ , ___ , ___ , ___ , ___ , KF7 , KG7 , KH7 , KI7 , KJ7 , KK7 , KL7 , KM7 , KN7 , KO7 , KP7 , ___ , ___ }, \
-}
-
 inline void ph_caps_led_on(void)  { DDRC |=  (1<<6); PORTC &= ~(1<<6); }
 inline void ph_caps_led_off(void) { DDRC &= ~(1<<6); PORTC &= ~(1<<6); }
 

keyboards/clueboard/unorthodox/config.h

@@ -0,0 +1,121 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC1ED
+#define PRODUCT_ID      0x23C0
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Clueboard
+#define PRODUCT         Unorthodox
+#define DESCRIPTION     A compact row-staggered keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 8
+
+#define MATRIX_ROW_PINS { B4, B3, B2, B1, B0 }
+#define MATRIX_COL_PINS { B5, A3, A2, A1, A0, B13, B14, B15 }
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 6
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+// #define WS2812_LED_N 2
+// #define RGBLED_NUM WS2812_LED_N
+// #define WS2812_TIM_N 2
+// #define WS2812_TIM_CH 2
+// #define PORT_WS2812     GPIOA
+// #define PIN_WS2812      1
+// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+//#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
+//#define WS2812_EXTERNAL_PULLUP
+

keyboards/clueboard/unorthodox/keymaps/default/keymap.c

@@ -0,0 +1,27 @@
+/* Copyright 2018 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT(\
+    KC_INS,             KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F1, \
+    KC_DEL,          KC_TAB,  KC_Q, KC_W, KC_E, KC_R, KC_T, KC_F2, \
+                  KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_F3, \
+             KC_LSFT,    KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F4, \
+    KC_HOME, KC_END, KC_LCTL,    KC_LGUI, KC_LALT, KC_SPC, KC_F5 \
+  )
+};

keyboards/clueboard/unorthodox/readme.md

@@ -0,0 +1,14 @@
+Unorthodox
+==========
+
+A split row-staggered keyboard with a symetric layout.
+
+Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+Hardware Supported: Unorthodox Kit w/Proton C
+Hardware Availability: TBD
+
+Make example for this keyboard (after setting up your build environment):
+
+    make clueboard/unorthodox:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/clueboard/unorthodox/rules.mk

@@ -33,3 +33,19 @@ OPT_DEFS =
 
 # Options to pass to dfu-util when flashing
 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes  # Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes     # USB Nkey Rollover
+AUDIO_ENABLE = yes
+RGBLIGHT_ENABLE = no
+# SERIAL_LINK_ENABLE = yes

keyboards/clueboard/unorthodox/unorthodox.c

@@ -1,4 +1,4 @@
-/* Copyright 2017 Benjamin Kesselring
+/* Copyright 2018 Jack Humbert
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,8 +14,12 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#pragma once
+#include "unorthodox.h"
 
+void matrix_init_kb(void) {
+  // Turn status LED on
+  //setPinOutput(C13);
+  //writePinHigh(C13);
 
-// place overrides here
-
+  matrix_init_user();
+}

keyboards/clueboard/unorthodox/unorthodox.h

@@ -0,0 +1,32 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "quantum.h"
+
+#define LAYOUT(\
+    k00,          k01, k02, k03, k04, k05, k06, k07, \
+    k10,        k11, k12, k13, k14, k15, k16, k17, \
+              k21, k22, k23, k24, k25, k26, k27, \
+         k31,    k32, k33, k34, k35, k36, k37, \
+    k40, k41, k42,    k43,   k44,    k46, k47 \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+    { KC_NO, k21, k22, k23, k24, k25, k26, k27 }, \
+    { KC_NO, k31, k32, k33, k34, k35, k36, k37 }, \
+    { k40, k41, k42, k43, k44, KC_NO, k46, k47 }, \
+}

keyboards/duck/octagon/v2/info.json

@@ -1,16 +1,12 @@
 {
-    "keyboard_name": "Octagon V2",
-    "url": "",
-    "maintainer": "qmk",
-    "width": 16,
-    "height": 6,
+    "keyboard_name": "Octagon V2", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 16, 
+    "height": 6, 
     "layouts": {
         "LAYOUT": {
             "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"x":12.75, "y":3}, {"label":"Enter", "x":13.75, "y":3, "w":1.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
-        },
-
-        "LAYOUT_75_ansi": {
-          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1, "w":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":6.5, "y":2}, {"x":7.5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2, "w":1.5}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.75}, {"x":1.75, "y":3}, {"x":2.75, "y":3}, {"x":3.75, "y":3}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3, "w":2.25}, {"x":15, "y":3}, {"x":0, "y":4, "w":2.25}, {"x":2.25, "y":4}, {"x":3.25, "y":4}, {"x":4.25, "y":4}, {"x":5.25, "y":4}, {"x":6.25, "y":4}, {"x":7.25, "y":4}, {"x":8.25, "y":4}, {"x":9.25, "y":4}, {"x":10.25, "y":4}, {"x":11.25, "y":4}, {"x":12.25, "y":4, "w":1.75}, {"x":14, "y":4}, {"x":15, "y":4}, {"x":0, "y":5, "w":1.25}, {"x":1.25, "y":5, "w":1.25}, {"x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"x":10, "y":5}, {"x":11, "y":5}, {"x":12, "y":5}, {"x":13, "y":5}, {"x":14, "y":5}, {"x":15, "y":5}]
         }
     }
 }

keyboards/dz60/dz60.h

@@ -170,33 +170,6 @@
     { k40,  k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, k4a,  k4b,  KC_NO, k4d,   k4e   }  \
 }
 
-/* LAYOUT_60_ansi_split
- * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
- * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e     │
- * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
- * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
- * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
- * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
- * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤
- * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d        │
- * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
- * │40  │41  │43  │44      │46  │48        │4a  │4b  │4d  │4e  │
- * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
-*/
-#define LAYOUT_60_ansi_split( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c,      k0e, \
-    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
-    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
-    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d,      \
-    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b,      k4d, k4e  \
-) { \
-    { k00,  k01,   k02,   k03,  k04,   k05,   k06,  k07,   k08,   k09,   k0a,  k0b,  k0c,   KC_NO, k0e   }, \
-    { k10,  KC_NO, k12,   k13,  k14,   k15,   k16,  k17,   k18,   k19,   k1a,  k1b,  k1c,   k1d,   k1e   }, \
-    { k20,  KC_NO, k22,   k23,  k24,   k25,   k26,  k27,   k28,   k29,   k2a,  k2b,  k2c,   k2d,   KC_NO }, \
-    { k30,  KC_NO, k32,   k33,  k34,   k35,   k36,  k37,   k38,   k39,   k3a,  k3b,  KC_NO, k3d,   KC_NO }, \
-    { k40,  k41,   KC_NO, k43,  k44,   KC_NO, k46,  KC_NO, k48,   KC_NO, k4a,  k4b,  KC_NO, k4d,   k4e   }  \
-}
-
 /* LAYOUT_60_iso
  * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
  * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e     │

keyboards/dz60/info.json

@@ -25,10 +25,6 @@
       "key_count": 61,
       "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
     },
-    "LAYOUT_60_ansi_split": {
-      "key_count": 61,
-      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"label":"FN", "x":6.00, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
-    },
     "LAYOUT_60_iso": {
       "key_count": 62,
       "layout": [{"label":"¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]

keyboards/dz60/keymaps/zvecr/keymap.c

@@ -1,40 +0,0 @@
-#include QMK_KEYBOARD_H
-
-/*
-* Each layer gets a name for readability.
-* The underscores don't mean anything - you can
-* have a layer called STUFF or any other name.
-* Layer names don't all need to be of the same
-* length, and you can also skip them entirely
-* and just use numbers.
-*
-*/
-#define BL 0     // Base Layer
-#define FL 1     // Function Layer
-#define ML 2     // Macro Layer
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-	[BL] = LAYOUT_60_ansi_split(
-		KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,
-		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-		KC_CAPS,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
-		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,
-		KC_LCTL, KC_LGUI,          KC_LALT,          KC_SPC,  MO(FL),  KC_SPC,                             KC_RALT, KC_RGUI,          MO(ML),  KC_RCTL),
-
-	[FL] = LAYOUT_60_ansi_split(
-		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_DEL,
-		_______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
-		_______,          _______, _______, _______, _______, _______, _______, _______, _______, KC_INS,  KC_HOME, KC_PGUP, _______,
-		_______,          _______, _______, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, _______, KC_DEL,  KC_END,  KC_PGDN,          _______,
-		_______, _______,          _______,          _______, _______, _______,                            _______, _______,          _______, _______),
-
-
-	[ML] = LAYOUT_60_ansi_split(
-		_______, KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,           _______,
-		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
-		_______, _______,          _______,          _______, _______, _______,                            _______, _______,          _______, _______),
-
-};

keyboards/ergodox_ez/config.h

@@ -85,20 +85,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBW 1
 
-/*
- * The debounce filtering reports a key/switch change directly,
- * without any extra delay. After that the debounce logic will filter
- * all further changes, until the key/switch reports the same state for
- * the given count of scans.
- * So a perfect switch will get a short debounce period and
- * a bad key will get a much longer debounce period.
- * The result is an adaptive debouncing period for each switch.
- *
+/* "debounce" is measured in keyboard scans. Some users reported
+ * needing values as high as 15, which was at the time around 50ms.
  * If you don't define it here, the matrix code will default to
  * 5, which is now closer to 10ms, but still plenty according to
  * manufacturer specs.
+ *
+ * Default is quite high, because of reports with some production
+ * runs seeming to need it. This may change when configuration for
+ * this is more directly exposed.
  */
-#define DEBOUNCE    10
+#define DEBOUNCE    15
 
 #define USB_MAX_POWER_CONSUMPTION 500
 

keyboards/ergodox_ez/ergodox_ez.c

@@ -269,7 +269,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 };
 
 
-__attribute__ ((weak))
 const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
 
     /*{row | col << 4}

keyboards/ergodox_ez/keymaps/default/keymap.c

@@ -1,4 +1,6 @@
 #include QMK_KEYBOARD_H
+#include "debug.h"
+#include "action_layer.h"
 #include "version.h"
 
 #define BASE 0 // default layer

keyboards/ergodox_ez/keymaps/default_glow/keymap.c

@@ -1 +0,0 @@
-// Placeholder.  See ../default/keymap.c for details

keyboards/ergodox_ez/keymaps/default_glow/rules.mk

@@ -1,4 +0,0 @@
-RGBLIGHT_ENABLE = no
-RGB_MATRIX_ENABLE = yes # enable later
-
-SRC += ../default/keymap.c

keyboards/ergodox_ez/matrix.c

@@ -57,11 +57,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* matrix state(1:on, 0:off) */
 static matrix_row_t matrix[MATRIX_ROWS];
-/*
- * matrix state(1:on, 0:off)
- * contains the raw values without debounce filtering of the last read cycle.
- */
-static matrix_row_t raw_matrix[MATRIX_ROWS];
 
 // Debouncing: store for each key the number of scans until it's eligible to
 // change.  When scanning the matrix, ignore any changes in keys that have
@@ -123,7 +118,6 @@ void matrix_init(void)
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
         matrix[i] = 0;
-        raw_matrix[i] = 0;
         for (uint8_t j=0; j < MATRIX_COLS; ++j) {
             debounce_matrix[i * MATRIX_COLS + j] = 0;
         }
@@ -157,30 +151,26 @@ void matrix_power_up(void) {
 
 // Returns a matrix_row_t whose bits are set if the corresponding key should be
 // eligible to change in this scan.
-matrix_row_t debounce_mask(matrix_row_t rawcols, uint8_t row) {
+matrix_row_t debounce_mask(uint8_t row) {
   matrix_row_t result = 0;
-  matrix_row_t change = rawcols ^ raw_matrix[row];
-  raw_matrix[row] = rawcols;
-  for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
-    if (debounce_matrix[row * MATRIX_COLS + i]) {
-      --debounce_matrix[row * MATRIX_COLS + i];
+  for (uint8_t j=0; j < MATRIX_COLS; ++j) {
+    if (debounce_matrix[row * MATRIX_COLS + j]) {
+      --debounce_matrix[row * MATRIX_COLS + j];
     } else {
-      result |= (1 << i);
-    }
-    if (change & (1 << i)) {
-      debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
+      result |= (1 << j);
     }
   }
   return result;
 }
 
-matrix_row_t debounce_read_cols(uint8_t row) {
-  // Read the row without debouncing filtering and store it for later usage.
-  matrix_row_t cols = read_cols(row);
-  // Get the Debounce mask.
-  matrix_row_t mask = debounce_mask(cols, row);
-  // debounce the row and return the result.
-  return (cols & mask) | (matrix[row] & ~mask);;
+// Report changed keys in the given row.  Resets the debounce countdowns
+// corresponding to each set bit in 'change' to DEBOUNCE.
+void debounce_report(matrix_row_t change, uint8_t row) {
+  for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
+    if (change & (1 << i)) {
+      debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
+    }
+  }
 }
 
 uint8_t matrix_scan(void)
@@ -224,12 +214,15 @@ uint8_t matrix_scan(void)
         select_row(i + MATRIX_ROWS_PER_SIDE);
         // we don't need a 30us delay anymore, because selecting a
         // left-hand row requires more than 30us for i2c.
-
-        // grab cols from left hand
-        matrix[i] = debounce_read_cols(i);
+        matrix_row_t mask = debounce_mask(i);
+        matrix_row_t cols = (read_cols(i) & mask) | (matrix[i] & ~mask);
+        debounce_report(cols ^ matrix[i], i);
+        matrix[i] = cols;
         // grab cols from right hand
-        matrix[i + MATRIX_ROWS_PER_SIDE] = debounce_read_cols(i + MATRIX_ROWS_PER_SIDE);
-
+        mask = debounce_mask(i + MATRIX_ROWS_PER_SIDE);
+        cols = (read_cols(i + MATRIX_ROWS_PER_SIDE) & mask) | (matrix[i + MATRIX_ROWS_PER_SIDE] & ~mask);
+        debounce_report(cols ^ matrix[i + MATRIX_ROWS_PER_SIDE], i + MATRIX_ROWS_PER_SIDE);
+        matrix[i + MATRIX_ROWS_PER_SIDE] = cols;
         unselect_rows();
     }
 
@@ -386,7 +379,7 @@ static void select_row(uint8_t row)
                 break;
             case 11:
                 DDRD  |= (1<<2);
-                PORTD &= ~(1<<2);
+                PORTD &= ~(1<<3);
                 break;
             case 12:
                 DDRD  |= (1<<3);
@@ -399,3 +392,4 @@ static void select_row(uint8_t row)
         }
     }
 }
+

keyboards/ergodox_ez/rules.mk

@@ -15,7 +15,8 @@
 #----------------------------------------------------------------------------
 
 # # project specific files
-SRC += matrix.c
+SRC = matrix.c \
+  i2c_master.c
 
 # MCU name
 MCU = atmega32u4
@@ -84,9 +85,4 @@ API_SYSEX_ENABLE = no
 RGBLIGHT_ENABLE = yes
 RGB_MATRIX_ENABLE = no # enable later
 
-ifeq ($(strip $(RGB_MATRIX_ENABLE)), no)
-  SRC += i2c_master.c
-endif
-
-
 LAYOUTS = ergodox

keyboards/fortitude60/serial.c

@@ -1,10 +1,5 @@
 /*
  * WARNING: be careful changing this code, it is very timing dependent
- *
- * 2018-10-28 checked
- *  avr-gcc 4.9.2
- *  avr-gcc 5.4.0
- *  avr-gcc 7.3.0
  */
 
 #ifndef F_CPU
@@ -19,60 +14,10 @@
 #include "serial.h"
 //#include <pro_micro.h>
 
-#ifdef SOFT_SERIAL_PIN
+#ifdef USE_SERIAL
 
-#ifdef __AVR_ATmega32U4__
-  // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
-  #ifdef USE_I2C
-    #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
-      #error Using ATmega32U4 I2C, so can not use PD0, PD1
-    #endif
-  #endif
-
-  #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
-    #define SERIAL_PIN_DDR   DDRD
-    #define SERIAL_PIN_PORT  PORTD
-    #define SERIAL_PIN_INPUT PIND
-    #if SOFT_SERIAL_PIN == D0
-      #define SERIAL_PIN_MASK _BV(PD0)
-      #define EIMSK_BIT       _BV(INT0)
-      #define EICRx_BIT       (~(_BV(ISC00) | _BV(ISC01)))
-      #define SERIAL_PIN_INTERRUPT INT0_vect
-    #elif  SOFT_SERIAL_PIN == D1
-      #define SERIAL_PIN_MASK _BV(PD1)
-      #define EIMSK_BIT       _BV(INT1)
-      #define EICRx_BIT       (~(_BV(ISC10) | _BV(ISC11)))
-      #define SERIAL_PIN_INTERRUPT INT1_vect
-    #elif  SOFT_SERIAL_PIN == D2
-      #define SERIAL_PIN_MASK _BV(PD2)
-      #define EIMSK_BIT       _BV(INT2)
-      #define EICRx_BIT       (~(_BV(ISC20) | _BV(ISC21)))
-      #define SERIAL_PIN_INTERRUPT INT2_vect
-    #elif  SOFT_SERIAL_PIN == D3
-      #define SERIAL_PIN_MASK _BV(PD3)
-      #define EIMSK_BIT       _BV(INT3)
-      #define EICRx_BIT       (~(_BV(ISC30) | _BV(ISC31)))
-      #define SERIAL_PIN_INTERRUPT INT3_vect
-    #endif
-  #elif  SOFT_SERIAL_PIN == E6
-    #define SERIAL_PIN_DDR   DDRE
-    #define SERIAL_PIN_PORT  PORTE
-    #define SERIAL_PIN_INPUT PINE
-    #define SERIAL_PIN_MASK  _BV(PE6)
-    #define EIMSK_BIT        _BV(INT6)
-    #define EICRx_BIT        (~(_BV(ISC60) | _BV(ISC61)))
-    #define SERIAL_PIN_INTERRUPT INT6_vect
-  #else
-  #error invalid SOFT_SERIAL_PIN value
-  #endif
-
-#else
- #error serial.c now support ATmega32U4 only
-#endif
-
-//////////////// for backward compatibility ////////////////////////////////
-#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION)
-/* --- USE OLD API (compatible with let's split serial.c) */
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
   #if SERIAL_SLAVE_BUFFER_LENGTH > 0
   uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
   #endif
@@ -97,118 +42,56 @@ SSTD_t transactions[] = {
 };
 
 void serial_master_init(void)
-{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
+{ soft_serial_initiator_init(transactions); }
 
 void serial_slave_init(void)
-{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
+{ soft_serial_target_init(transactions); }
 
 // 0 => no error
 // 1 => slave did not respond
 // 2 => checksum error
 int serial_update_buffers()
-{
-    int result;
-    result = soft_serial_transaction();
-    return result;
-}
+{ return soft_serial_transaction(); }
 
-#endif // end of OLD API (compatible with let's split serial.c)
-////////////////////////////////////////////////////////////////////////////
+#endif // Simple API (OLD API, compatible with let's split serial.c)
 
 #define ALWAYS_INLINE __attribute__((always_inline))
 #define NO_INLINE __attribute__((noinline))
 #define _delay_sub_us(x)    __builtin_avr_delay_cycles(x)
 
-// parity check
-#define ODD_PARITY 1
-#define EVEN_PARITY 0
-#define PARITY EVEN_PARITY
+// Serial pulse period in microseconds.
+#define TID_SEND_ADJUST 14
 
-#ifdef SERIAL_DELAY
-  // custom setup in config.h
-  // #define TID_SEND_ADJUST 2
-  // #define SERIAL_DELAY 6             // micro sec
-  // #define READ_WRITE_START_ADJUST 30 // cycles
-  // #define READ_WRITE_WIDTH_ADJUST 8 // cycles
-#else
-// ============ Standard setups ============
-
-#ifndef SELECT_SOFT_SERIAL_SPEED
-#define SELECT_SOFT_SERIAL_SPEED 1
-//  0: about 189kbps
-//  1: about 137kbps (default)
-//  2: about 75kbps
-//  3: about 39kbps
-//  4: about 26kbps
-//  5: about 20kbps
-#endif
-
-#if __GNUC__ < 6
-  #define TID_SEND_ADJUST 14
-#else
-  #define TID_SEND_ADJUST 2
-#endif
-
-#if SELECT_SOFT_SERIAL_SPEED == 0
+#define SELECT_SERIAL_SPEED 1
+#if SELECT_SERIAL_SPEED == 0
   // Very High speed
   #define SERIAL_DELAY 4             // micro sec
-  #if __GNUC__ < 6
-    #define READ_WRITE_START_ADJUST 33 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_START_ADJUST 34 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 1
+  #define READ_WRITE_START_ADJUST 33 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#elif SELECT_SERIAL_SPEED == 1
   // High speed
   #define SERIAL_DELAY 6             // micro sec
-  #if __GNUC__ < 6
-    #define READ_WRITE_START_ADJUST 30 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_START_ADJUST 33 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 2
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#elif SELECT_SERIAL_SPEED == 2
   // Middle speed
   #define SERIAL_DELAY 12            // micro sec
   #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 3
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#elif SELECT_SERIAL_SPEED == 3
   // Low speed
   #define SERIAL_DELAY 24            // micro sec
   #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 4
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#elif SELECT_SERIAL_SPEED == 4
   // Very Low speed
-  #define SERIAL_DELAY 36            // micro sec
+  #define SERIAL_DELAY 50            // micro sec
   #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 5
-  // Ultra Low speed
-  #define SERIAL_DELAY 48            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
 #else
-#error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif /* SELECT_SOFT_SERIAL_SPEED */
-#endif /* SERIAL_DELAY */
+#error Illegal Serial Speed
+#endif
+
 
 #define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
 #define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
@@ -222,21 +105,17 @@ int serial_update_buffers()
 #endif
 
 static SSTD_t *Transaction_table = NULL;
-static uint8_t Transaction_table_size = 0;
 
-inline static void serial_delay(void) ALWAYS_INLINE;
 inline static
 void serial_delay(void) {
   _delay_us(SERIAL_DELAY);
 }
 
-inline static void serial_delay_half1(void) ALWAYS_INLINE;
 inline static
 void serial_delay_half1(void) {
   _delay_us(SERIAL_DELAY_HALF1);
 }
 
-inline static void serial_delay_half2(void) ALWAYS_INLINE;
 inline static
 void serial_delay_half2(void) {
   _delay_us(SERIAL_DELAY_HALF2);
@@ -256,7 +135,6 @@ void serial_input_with_pullup(void) {
   SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
 }
 
-inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
 inline static
 uint8_t serial_read_pin(void) {
   return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
@@ -274,28 +152,30 @@ void serial_high(void) {
   SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
 }
 
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
+void soft_serial_initiator_init(SSTD_t *sstd_table)
 {
     Transaction_table = sstd_table;
-    Transaction_table_size = (uint8_t)sstd_table_size;
     serial_output();
     serial_high();
 }
 
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
+void soft_serial_target_init(SSTD_t *sstd_table)
 {
     Transaction_table = sstd_table;
-    Transaction_table_size = (uint8_t)sstd_table_size;
     serial_input_with_pullup();
 
-    // Enable INT0-INT3,INT6
-    EIMSK |= EIMSK_BIT;
-#if SERIAL_PIN_MASK == _BV(PE6)
-    // Trigger on falling edge of INT6
-    EICRB &= EICRx_BIT;
+#if SERIAL_PIN_MASK == _BV(PD0)
+    // Enable INT0
+    EIMSK |= _BV(INT0);
+    // Trigger on falling edge of INT0
+    EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+#elif SERIAL_PIN_MASK == _BV(PD2)
+    // Enable INT2
+    EIMSK |= _BV(INT2);
+    // Trigger on falling edge of INT2
+    EICRA &= ~(_BV(ISC20) | _BV(ISC21));
 #else
-    // Trigger on falling edge of INT0-INT3
-    EICRA &= EICRx_BIT;
+ #error unknown SERIAL_PIN_MASK value
 #endif
 }
 
@@ -311,7 +191,7 @@ void sync_recv(void) {
 }
 
 // Used by the reciver to send a synchronization signal to the sender.
-static void sync_send(void) NO_INLINE;
+static void sync_send(void)NO_INLINE;
 static
 void sync_send(void) {
   serial_low();
@@ -325,12 +205,12 @@ static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
     uint8_t byte, i, p, pb;
 
   _delay_sub_us(READ_WRITE_START_ADJUST);
-  for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) {
+  for( i = 0, byte = 0, p = 0; i < bit; i++ ) {
       serial_delay_half1();   // read the middle of pulses
       if( serial_read_pin() ) {
-          byte = (byte << 1) | 1; p ^= 1;
+	  byte = (byte << 1) | 1; p ^= 1;
       } else {
-          byte = (byte << 1) | 0; p ^= 0;
+	  byte = (byte << 1) | 0; p ^= 0;
       }
       _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
       serial_delay_half2();
@@ -350,13 +230,13 @@ static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
 void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
 void serial_write_chunk(uint8_t data, uint8_t bit) {
     uint8_t b, p;
-    for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) {
-        if(data & b) {
-            serial_high(); p ^= 1;
-        } else {
-            serial_low();  p ^= 0;
-        }
-        serial_delay();
+    for( p = 0, b = 1<<(bit-1); b ; b >>= 1) {
+	if(data & b) {
+	    serial_high(); p ^= 1;
+	} else {
+	    serial_low();  p ^= 0;
+	}
+	serial_delay();
     }
     /* send parity bit */
     if(p & 1) { serial_high(); }
@@ -408,13 +288,6 @@ void change_reciver2sender(void) {
     serial_delay_half1(); //4
 }
 
-static inline uint8_t nibble_bits_count(uint8_t bits)
-{
-    bits = (bits & 0x5) + (bits >> 1 & 0x5);
-    bits = (bits & 0x3) + (bits >> 2 & 0x3);
-    return bits;
-}
-
 // interrupt handle to be used by the target device
 ISR(SERIAL_PIN_INTERRUPT) {
 
@@ -424,15 +297,12 @@ ISR(SERIAL_PIN_INTERRUPT) {
   SSTD_t *trans = Transaction_table;
 #else
   // recive transaction table index
-  uint8_t tid, bits;
+  uint8_t tid;
   uint8_t pecount = 0;
   sync_recv();
-  bits = serial_read_chunk(&pecount,7);
-  tid = bits>>3;
-  bits = (bits&7) != nibble_bits_count(tid);
-  if( bits || pecount> 0 || tid > Transaction_table_size ) {
+  tid = serial_read_chunk(&pecount,4);
+  if(pecount> 0)
       return;
-  }
   serial_delay_half1();
 
   serial_high(); // response step1 low->high
@@ -445,17 +315,17 @@ ISR(SERIAL_PIN_INTERRUPT) {
   // target send phase
   if( trans->target2initiator_buffer_size > 0 )
       serial_send_packet((uint8_t *)trans->target2initiator_buffer,
-                         trans->target2initiator_buffer_size);
+			 trans->target2initiator_buffer_size);
   // target switch to input
   change_sender2reciver();
 
   // target recive phase
   if( trans->initiator2target_buffer_size > 0 ) {
       if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
-                               trans->initiator2target_buffer_size) ) {
-          *trans->status = TRANSACTION_ACCEPTED;
+			       trans->initiator2target_buffer_size) ) {
+	  *trans->status = TRANSACTION_ACCEPTED;
       } else {
-          *trans->status = TRANSACTION_DATA_ERROR;
+	  *trans->status = TRANSACTION_DATA_ERROR;
       }
   } else {
       *trans->status = TRANSACTION_ACCEPTED;
@@ -479,8 +349,6 @@ int  soft_serial_transaction(void) {
   SSTD_t *trans = Transaction_table;
 #else
 int  soft_serial_transaction(int sstd_index) {
-  if( sstd_index > Transaction_table_size )
-      return TRANSACTION_TYPE_ERROR;
   SSTD_t *trans = &Transaction_table[sstd_index];
 #endif
   cli();
@@ -507,10 +375,9 @@ int  soft_serial_transaction(int sstd_index) {
 
 #else
   // send transaction table index
-  int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index));
   sync_send();
   _delay_sub_us(TID_SEND_ADJUST);
-  serial_write_chunk(tid, 7);
+  serial_write_chunk(sstd_index, 4);
   serial_delay_half1();
 
   // wait for the target response (step1 low->high)
@@ -522,12 +389,12 @@ int  soft_serial_transaction(int sstd_index) {
   // check if the target is present (step2 high->low)
   for( int i = 0; serial_read_pin(); i++ ) {
       if (i > SLAVE_INT_ACK_WIDTH + 1) {
-          // slave failed to pull the line low, assume not present
-          serial_output();
-          serial_high();
-          *trans->status = TRANSACTION_NO_RESPONSE;
-          sei();
-          return TRANSACTION_NO_RESPONSE;
+	  // slave failed to pull the line low, assume not present
+	  serial_output();
+	  serial_high();
+	  *trans->status = TRANSACTION_NO_RESPONSE;
+	  sei();
+	  return TRANSACTION_NO_RESPONSE;
       }
       _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
   }
@@ -537,12 +404,12 @@ int  soft_serial_transaction(int sstd_index) {
   // if the target is present syncronize with it
   if( trans->target2initiator_buffer_size > 0 ) {
       if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
-                                trans->target2initiator_buffer_size) ) {
-          serial_output();
-          serial_high();
-          *trans->status = TRANSACTION_DATA_ERROR;
-          sei();
-          return TRANSACTION_DATA_ERROR;
+				trans->target2initiator_buffer_size) ) {
+	  serial_output();
+	  serial_high();
+	  *trans->status = TRANSACTION_DATA_ERROR;
+	  sei();
+	  return TRANSACTION_DATA_ERROR;
       }
    }
 
@@ -552,7 +419,7 @@ int  soft_serial_transaction(int sstd_index) {
   // initiator send phase
   if( trans->initiator2target_buffer_size > 0 ) {
       serial_send_packet((uint8_t *)trans->initiator2target_buffer,
-                         trans->initiator2target_buffer_size);
+			 trans->initiator2target_buffer_size);
   }
 
   // always, release the line when not in use
@@ -574,17 +441,4 @@ int soft_serial_get_and_clean_status(int sstd_index) {
 }
 #endif
 
-#endif
-
-// Helix serial.c history
-//   2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
-//   2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
-//             (adjusted with avr-gcc 4.9.2)
-//   2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
-//             (adjusted with avr-gcc 4.9.2)
-//   2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
-//             (adjusted with avr-gcc 4.9.2)
-//   2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
-//             (adjusted with avr-gcc 7.3.0)
-//   2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
-//             (adjusted with avr-gcc 5.4.0, 7.3.0)
+#endif

keyboards/fortitude60/serial.h

@@ -4,47 +4,40 @@
 #include <stdbool.h>
 
 // /////////////////////////////////////////////////////////////////
-// Need Soft Serial defines in config.h
+// Need Soft Serial defines in serial_config.h
 // /////////////////////////////////////////////////////////////////
 // ex.
-//  #define SOFT_SERIAL_PIN ??   // ?? = D0,D1,D2,D3,E6
-//  OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
-//                                               //  1: about 137kbps (default)
-//                                               //  2: about 75kbps
-//                                               //  3: about 39kbps
-//                                               //  4: about 26kbps
-//                                               //  5: about 20kbps
+//  #define SERIAL_PIN_DDR DDRD
+//  #define SERIAL_PIN_PORT PORTD
+//  #define SERIAL_PIN_INPUT PIND
+//  #define SERIAL_PIN_MASK _BV(PD?)   ?=0,2
+//  #define SERIAL_PIN_INTERRUPT INT?_vect  ?=0,2
 //
-// //// USE OLD API (compatible with let's split serial.c)
+// //// USE Simple API (OLD API, compatible with let's split serial.c)
 // ex.
 //  #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
 //  #define SERIAL_MASTER_BUFFER_LENGTH 1
 //
-// //// USE NEW API
-//    //// USE simple API (using signle-type transaction function)
-//      #define SERIAL_USE_SINGLE_TRANSACTION
-//    //// USE flexible API (using multi-type transaction function)
-//      #define SERIAL_USE_MULTI_TRANSACTION
+// //// USE flexible API (using multi-type transaction function)
+//  #define SERIAL_USE_MULTI_TRANSACTION
 //
 // /////////////////////////////////////////////////////////////////
 
 
-//////////////// for backward compatibility ////////////////////////////////
-#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION)
-/* --- USE OLD API (compatible with let's split serial.c) */
- #if SERIAL_SLAVE_BUFFER_LENGTH > 0
- extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
- #endif
- #if SERIAL_MASTER_BUFFER_LENGTH > 0
- extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
- #endif
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
+#if SERIAL_SLAVE_BUFFER_LENGTH > 0
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+#endif
+#if SERIAL_MASTER_BUFFER_LENGTH > 0
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+#endif
 
- void serial_master_init(void);
- void serial_slave_init(void);
- int serial_update_buffers(void);
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
 
-#endif // end of USE OLD API
-////////////////////////////////////////////////////////////////////////////
+#endif // USE Simple API
 
 // Soft Serial Transaction Descriptor
 typedef struct _SSTD_t  {
@@ -54,18 +47,16 @@ typedef struct _SSTD_t  {
     uint8_t target2initiator_buffer_size;
     uint8_t *target2initiator_buffer;
 } SSTD_t;
-#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
 
 // initiator is transaction start side
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
+void soft_serial_initiator_init(SSTD_t *sstd_table);
 // target is interrupt accept side
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
+void soft_serial_target_init(SSTD_t *sstd_table);
 
 // initiator resullt
 #define TRANSACTION_END 0
 #define TRANSACTION_NO_RESPONSE 0x1
 #define TRANSACTION_DATA_ERROR  0x2
-#define TRANSACTION_TYPE_ERROR  0x4
 #ifndef SERIAL_USE_MULTI_TRANSACTION
 int  soft_serial_transaction(void);
 #else
@@ -81,9 +72,9 @@ int  soft_serial_transaction(int sstd_index);
 //   target:
 //       TRANSACTION_DATA_ERROR
 //    or TRANSACTION_ACCEPTED
-#define TRANSACTION_ACCEPTED 0x8
+#define TRANSACTION_ACCEPTED 0x4
 #ifdef SERIAL_USE_MULTI_TRANSACTION
 int  soft_serial_get_and_clean_status(int sstd_index);
 #endif
 
-#endif /* SOFT_SERIAL_H */
+#endif /* SOFT_SERIAL_H */

keyboards/fortitude60/serial_config.h

@@ -2,9 +2,13 @@
 #define SOFT_SERIAL_CONFIG_H
 
 /* Soft Serial defines */
-#define SOFT_SERIAL_PIN D2
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD2)
+#define SERIAL_PIN_INTERRUPT INT2_vect
 
 #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
 #define SERIAL_MASTER_BUFFER_LENGTH 1
 
-#endif /* SOFT_SERIAL_CONFIG_H */
+#endif /* SOFT_SERIAL_CONFIG_H */

keyboards/handwired/108key_trackpoint/108key_trackpoint.c

@@ -1 +0,0 @@
-#include "108key_trackpoint.h"

keyboards/handwired/108key_trackpoint/108key_trackpoint.h

@@ -1,23 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT( \
-  K000,       K002, K003, K004, K005,       K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017,       K019, K020, K021, K022, \
-	                                                                                                                                          \
-  K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, K215, K216, K217,       K219, K220, K221, K222, \
-  K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317,       K319, K320, K321,       \
-  K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413,                               K419, K420, K421, K422, \
-  K501, K502, K503, K504, K505, K506, K507, K508, K509, K510, K511,       K513,             K516,             K519, K520, K521,       \
-	K600, K601,       K603,             K606,                   K610, K611,       K613, K614, K615, K616, K617,       K619,       K621, K622, \
-                             K705, K706, K707  \
-) { \
-  { K000,  KC_NO, K002,  K003,  K004,  K005,  KC_NO, K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015,  K016,  K017,  KC_NO, K019,  K020,  K021,  K022 }, \
-  { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
-  { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  KC_NO, K214,  K215,  K216,  K217,  KC_NO, K219,  K220,  K221,  K222 }, \
-  { K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  K315,  K316,  K317,  KC_NO, K319,  K320,  K321,  KC_NO }, \
-  { K400,  KC_NO, K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  K412,  K413,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K419,  K420,  K421,  K422 }, \
-  { KC_NO, K501,  K502,  K503,  K504,  K505,  K506,  K507,  K508,  K509,  K510,  K511,  KC_NO, K513,  KC_NO, KC_NO, K516,  KC_NO, KC_NO, K519,  K520,  K521,  KC_NO }, \
-  { K600,  K601,  KC_NO, K603,  KC_NO, KC_NO, K606,  KC_NO, KC_NO, KC_NO, K610,  K611,  KC_NO, K613,  K614,  K615,  K616,  K617,  KC_NO, K619,  KC_NO, K621,  K622 }, \
-  { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K705,  K706,  K707,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }  \
-}

keyboards/handwired/108key_trackpoint/README.md

@@ -1,23 +0,0 @@
-# 108 Key with TrackPoint
-
-![wiring](https://raw.githubusercontent.com/qmk/qmk.fm/gh-pages/keyboards/handwired/108key_trackpoint/wiring.JPG)
-
-This is based off the handwired/trackpoint keyboard and generated code from [Keyboard Firmware Builder](https://kbfirmware.com/).
-
-Keyboard Maintainer: [mkem114](https://github.com/mkem114)  
-Hardware Supported (tested): Teensy++ 2.0
-
-Make example for this keyboard (after setting up your build environment):
-
-    make handwired/108keyTrackpoint:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-You may have to modify the source code to suit 104 keys, RGB back-lights, different micro-controllers, or big ass enter.
-
-There are three keymaps:
-* qwerty with the four extra keys being: mute, media prev, media next, and media play
-* dvorak with the four extra keys being: mute, media prev, media next, and media play
-* dvorak_media with the caps lock being media play and the four extra keys being: mute, volume down, volume up, and media next
-
-To figure out how to wire your specific TrackPoint have a look out: [How to integrate a trackpoint in a mechanical keyboard](https://github.com/alonswartz/trackpoint).

keyboards/handwired/108key_trackpoint/config.h

@@ -1,73 +0,0 @@
-#pragma once
-
-#include "config_common.h"
-
-#define VENDOR_ID       0x1234
-#define PRODUCT_ID      0x5678
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    QMK
-#define PRODUCT         108Key-Trackpoint
-#define DESCRIPTION     A 108 key ANSI keyboard with a trackpoint and three mouse buttons
-
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 23
-
-#ifdef PS2_USE_USART
-  #define PS2_CLOCK_PORT  PORTD
-  #define PS2_CLOCK_PIN   PIND
-  #define PS2_CLOCK_DDR   DDRD
-  #define PS2_CLOCK_BIT   5
-  #define PS2_DATA_PORT   PORTD
-  #define PS2_DATA_PIN    PIND
-  #define PS2_DATA_DDR    DDRD
-  #define PS2_DATA_BIT    2
-
-  /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
-  /* set DDR of CLOCK as input to be slave */
-  #define PS2_USART_INIT() do {   \
-      PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
-      PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
-      UCSR1C = ((1 << UMSEL10) |  \
-                (3 << UPM10)   |  \
-                (0 << USBS1)   |  \
-                (3 << UCSZ10)  |  \
-                (0 << UCPOL1));   \
-      UCSR1A = 0;                 \
-      UBRR1H = 0;                 \
-      UBRR1L = 0;                 \
-  } while (0)
-  #define PS2_USART_RX_INT_ON() do {  \
-      UCSR1B = ((1 << RXCIE1) |       \
-                (1 << RXEN1));        \
-  } while (0)
-  #define PS2_USART_RX_POLL_ON() do { \
-      UCSR1B = (1 << RXEN1);          \
-  } while (0)
-  #define PS2_USART_OFF() do {    \
-      UCSR1C = 0;                 \
-      UCSR1B &= ~((1 << RXEN1) |  \
-                  (1 << TXEN1));  \
-  } while (0)
-  #define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
-  #define PS2_USART_RX_DATA       UDR1
-  #define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
-  #define PS2_USART_RX_VECT       USART1_RX_vect
-#endif
-
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
-#define MATRIX_COL_PINS { C0, C1, C2, C3, C4, C5, C6, C7, D0, D1, F0, D3, D4, F1, D6, D7, E0, E1, E2, E3, E4, E5, E6 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-#define DEBOUNCING_DELAY 5
-
-#define LOCKING_SUPPORT_ENABLE
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for commkand */
-#define IS_COMMAND() ( \
-  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-

keyboards/handwired/108key_trackpoint/keymaps/default/keymap.c

@@ -1,14 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT (
-    KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_MUTE, KC_MPRV, KC_MNXT, KC_MPLY,
-
-    KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9,
-    KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
-    KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_P1, KC_P2, KC_P3,
-    KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_APP, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT,
-    KC_BTN1, KC_BTN3, KC_BTN2
-  )
-};

keyboards/handwired/108key_trackpoint/keymaps/dvorak/keymap.c

@@ -1,14 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT (
-    KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_MUTE, KC_MPRV, KC_MNXT, KC_MPLY,
-
-    KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-    KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9,
-    KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
-    KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_LSFT, KC_UP, KC_P1, KC_P2, KC_P3,
-    KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_APP, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT,
-    KC_BTN1, KC_BTN3, KC_BTN2
-  )
-};

keyboards/handwired/108key_trackpoint/keymaps/dvorak_media/keymap.c

@@ -1,14 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT (
-    KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT,
-
-    KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-    KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9,
-    KC_MPLY, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
-    KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_LSFT, KC_UP, KC_P1, KC_P2, KC_P3,
-    KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_APP, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT,
-    KC_BTN1, KC_BTN3, KC_BTN2
-  )
-};

keyboards/handwired/108key_trackpoint/rules.mk

@@ -1,82 +0,0 @@
-# MCU name
-MCU = at90usb1286
-#MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-BOOTLOADER = halfkay
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
-PS2_MOUSE_ENABLE = yes
-PS2_USE_USART = yes

keyboards/handwired/ep40/ep40.c

@@ -13,7 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "40.h"
+#include "ep40.h"
 
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here

keyboards/handwired/ep40/readme.md

@@ -4,12 +4,12 @@
 
 A simple 40% keyboard
 
-Keyboard Maintainer: [Elliot Powell](https://github.com/e11i0t23), [/u/e11i0t23 on reddit](https://reddit.com/u/e11i0t23)  
+Keyboard Maintainer: [Elliot Powell](https://reddit.com/u/e11i0t23, https://github.com/e11i0t23)  
 Hardware Supported: EP40 PCB  
 Hardware Availability: None at the moment
 
 Make example for this keyboard (after setting up your build environment):
 
-    make ep/40:default
+    make ep40:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/idobo/keymaps/default75/keymap.c

@@ -1,67 +0,0 @@
-/* Copyright 2018 Milton Griffin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-// Keyboard Layers
-#define _QW 0
-#define _FN 1
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* QWERTY
- * .--------------------------------------------------------------------------------------------------------------------------------------.
- * | ESC    | 1      | 2      | 3      | 4      | 5      | -      | `      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
- * | TAB    | Q      | W      | E      | R      | T      | [      | \      | ]      | Y      | U      | I      | O      | P      | '      |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
- * | CAP LK | A      | S      | D      | F      | G      | HOME   | DEL    | PG UP  | H      | J      | K      | L      | ;      | ENTER  |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
- * | LSHIFT | Z      | X      | C      | V      | B      | END    | UP     | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
- * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
- * | LCTRL  | LGUI   | LALT   | FN     | SPACE  | SPACE  | LEFT   | DOWN   | RIGHT  | SPACE  | SPACE  | FN     | RALT   | RGUI   | RCTRL  |
- * '--------------------------------------------------------------------------------------------------------------------------------------'
- */
-
- [_QW] = LAYOUT_ortho_5x15( /* QWERTY */
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS, KC_GRV,  KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC, KC_BSLS, KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_QUOT, \
-    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME, KC_DEL,  KC_PGUP, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,  \
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_UP,   KC_PGDN, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, MO(_FN), KC_SPC,  KC_SPC,  KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC,  KC_SPC,  MO(_FN), KC_RALT, KC_RGUI, KC_RCTL  \
- ),
-
-/* FUNCTION
- * .--------------------------------------------------------------------------------------------------------------------------------------.
- * | F1     | F2     | F3     | F4     | F5     | F6     | NUM LK | P/     | P*     | F7     | F8     | F9     | F10    | F11    | F12    |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * | SELECT | CALC   | MYCOMP | MAIL   | RGB HD | RGB HI | P7     | P8     | P9     | -      |        |        | PR SCR | SCR LK | PAUSE  |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * | PREV   | PLAY   | NEXT   | STOP   | RGB SD | RGB SI | P4     | P5     | P6     | +      |        | RESET  |        |        |        |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * | VOL-   | MUTE   | VOL+   | APP    | RGB VD | RGB VI | P1     | P2     | P3     | PENT   |        |        |        |        |        |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        |        | RGB TG | FN     | RGB RMD| RGB MD | P0     |        | P.     | PENT   | PENT   | FN     |        |        |        |
- * '--------------------------------------------------------------------------------------------------------------------------------------'
- */
- 
- [_FN] = LAYOUT_ortho_5x15( /* FUNCTION */
-    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_NLCK, KC_SLSH, KC_ASTR, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  \
-    KC_MSEL, KC_CALC, KC_MYCM, KC_MAIL, RGB_HUD, RGB_HUI, KC_P7,   KC_P8,   KC_P9,   KC_MINS, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, \
-    KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, RGB_SAD, RGB_SAI, KC_P4,   KC_P5,   KC_P6,   KC_PLUS, _______, RESET,   _______, _______, _______, \
-    KC_VOLD, KC_MUTE, KC_VOLU, KC_APP,  RGB_VAD, RGB_VAI, KC_P1,   KC_P2,   KC_P3,   KC_PENT, _______, _______, _______, _______, _______, \
-    _______, _______, RGB_TOG, MO(_FN), RGB_RMOD,RGB_MOD, KC_P0,   _______, KC_PDOT, KC_PENT, KC_PENT, MO(_FN), _______, _______, _______  \
- ),
-};

keyboards/idobo/keymaps/default75/readme.md

@@ -1 +0,0 @@
-# The default keymap for xd75, with led controls

keyboards/idobo/keymaps/default75/rules.mk

@@ -1,14 +0,0 @@
-# Copyright 2013 Jun Wako <wakojun@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.

keyboards/levinson/readme.md

@@ -4,25 +4,17 @@ Levinson
 A split 40% split 4x12 ortholinear keyboard made and sold by Keebio. It's essentially a Let's Split with LED backlight support and 2u thumb key support. [More info at Keebio](https://keeb.io).
 
 Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges)  
-Hardware Supported: Pro Micro, Elite-C  
+Hardware Supported: Pro Micro  
 Hardware Availability: [Keebio](https://keeb.io)  
 
 Make example for this keyboard (after setting up your build environment):
 
     make levinson/rev2:default
 
-Example of flashing this keyboard with Pro micro:
+Example of flashing this keyboard:
 
     make levinson/rev2:default:avrdude
 
-Example of flashing this keyboard with Elite-C:
-
-You'll need to add `BOOTLOADER = atmel-dfu` to your `rules.mk` to ensure that resetting the board works properly.
-
-Hold the reset button on the Elite-C board, or the reset button on the keyboard if already assembled, then release the button and run:
-
-    make levinson/rev2:default:dfu
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
 
 A build guide for this keyboard can be found here: [Levinson Build Guide](https://docs.keeb.io)

keyboards/niu_mini/keymaps/spacebarracecar/keymap.c

@@ -6,8 +6,8 @@
 
 enum layers {
   _BASE,
-  _RAISE,
-  _LOWER
+  _LOWER,
+  _RAISE
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_LOWER] = LAYOUT_ortho_4x12(
   DE_TILD,  DE_EXLM,  DE_DQOT,  DE_HASH,  DE_DLR,   DE_PERC,  CU_CIRC,  DE_AMPR,  DE_ASTR,  DE_LPRN,  DE_RPRN,  _______,
   _______,  DE_AT,    CTRLX,    CTRLC,    CTRLV,    XXXXXXX,  XXXXXXX,  DE_UNDS,  DE_PLUS,  DE_LCBR,  DE_RCBR,  DE_PIPE,
-  _______,  DE_EURO,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  DE_MINS,  CU_EQL,   CU_LBRC,  CU_RBRC,  _______,
+  _______,  DE_EURO,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,  _______,  _______,  _______,
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
 ),
 
@@ -64,7 +64,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_RAISE] = LAYOUT_ortho_4x12(
   CU_GRV,   DE_1,     DE_2,     CU_3,     DE_4,     DE_5,     CU_6,     CU_7,     CU_8,     CU_9,     CU_0,     _______,
   _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    DE_MINS,  CU_EQL,   CU_LBRC,  CU_RBRC,  CU_BSLS,
-  _______,  KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   XXXXXXX,  _______,  _______,  _______,  _______,
+  _______,  KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   _______,  _______,  _______,  _______,  _______,
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
 ),
 
@@ -89,21 +89,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Navigation
 ,-----------------------------------------------------------------------------------------------------------------------.
-|ALT F4   |PageDown |Up       |PageUp   |Home     |         |         |         |Win+Up   |         |         |Del      |
+|ESCT     |PageDown |Up       |PageUp   |Home     |         |         |         |Win+Up   |         |         |Del      |
 |---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
 |         |Left     |Down     |Right    |End      |         |         |Win+Left |Win+Down |Win+Right|         |Enter    |
 |---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
 |         |Prev     |Pause    |Next     |LowerVol |RaiseVol |Mute     |         |         |         |         |         |
 |---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|RESET    |ESCT     |         |         |         |         |         |         |         |         |         |Game     |
+|RESET    |         |         |         |         |         |         |         |         |         |         |Game     |
 `-----------------------------------------------------------------------------------------------------------------------'
 */
 
 [_NAV] = LAYOUT_ortho_4x12(
-  ALTF4,    KC_PGDN,  KC_UP,    KC_PGUP,  KC_HOME,  XXXXXXX,  XXXXXXX,  XXXXXXX,  GUIU,     XXXXXXX,  XXXXXXX,  KC_DEL,
+  CU_ESCT,  KC_PGDN,  KC_UP,    KC_PGUP,  KC_HOME,  XXXXXXX,  XXXXXXX,  XXXXXXX,  GUIU,     XXXXXXX,  XXXXXXX,  KC_DEL,
   _______,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_END,   XXXXXXX,  XXXXXXX,  GUIL,     GUID,     GUIR,     RGB_M_P,  KC_ENT,
   _______,  KC_MPRV,  KC_MPLY,  KC_MNXT,  KC_VOLD,  KC_VOLU,  KC_MUTE,  RGB_TOG,  RGB_MOD,  RGB_HUI,  CU_RGBV,  _______,
-  RESET,    CU_ESCT,  _______,  _______,  _______,  KC_SPC,   KC_ENT,   _______,  _______,  _______,  _______,  CU_GAME
+  RESET,    _______,  _______,  _______,  _______,  KC_SPC,   KC_ENT,   _______,  _______,  _______,  _______,  CU_GAME
 )
 
 };
@@ -121,17 +121,6 @@ switch (keycode) {
     } else {
       return true;
     }
-  case KC_LALT:
-    if (game) {
-      if (record->event.pressed){
-        layer_on(_RAISE);
-      } else {
-        layer_off(_RAISE);
-      }
-      return false;
-    } else {
-      return true;
-    }
   default:
     return true;
   }

keyboards/planck/keymaps/ishtob/keymap.c

@@ -25,9 +25,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_QWERTY] = LAYOUT_planck_grid(
-  LT_FN(KC_TAB), _________________QWERTY_L1_________________, _________________QWERTY_R1_________________, KC_BSPC,
-  KC_LCTL,       _________________QWERTY_L2_________________, _________________QWERTY_R2_________________, CTL_ENT,
-  KC_LSFT,       _________________QWERTY_L3_________________, _________________QWERTY_R3_________________, LT_RAI(KC_MINS),
+  LT_FN(KC_TAB), KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  KC_LCTL,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    LT_MC(KC_SCLN), CTL_ENT,
+  KC_LSFT,       KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, LT_RAI(KC_MINS),
   KC_ESC,        KC_CAPS, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE, KC_RALT, TG_NUMLAY, KC_APP,  KC_DEL
 ),
  
@@ -43,10 +43,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_COLEMAK] = LAYOUT_planck_grid(
-  LT_FN(KC_TAB), _________________COLEMAK_L1________________, _________________COLEMAK_R1________________, KC_BSPC,
-  KC_LCTL,       _________________COLEMAK_L2________________, _________________COLEMAK_R2________________, KC_ENT,
-  KC_LSFT,       _________________COLEMAK_L3________________, _________________COLEMAK_R3________________, LT_RAI(KC_MINS),
-  KC_ESC,        KC_CAPS, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE, KC_RALT, TG_NUMLAY, KC_APP,  KC_DEL
+  LT_FN(KC_TAB),    KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+  KC_LCTL,   KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    LT_MC(KC_O),    KC_ENT,
+  KC_LSFT,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, LT_RAI(KC_MINS),
+  KC_ESC,    KC_CAPS, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE, KC_RALT, TG_NUMLAY, KC_APP,  KC_DEL
 ),
  
 /* Dvorak
@@ -61,10 +61,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_DVORAK] = LAYOUT_planck_grid(
-  LT_FN(KC_TAB), _________________DVORAK_L1_________________, _________________DVORAK_R1_________________, KC_BSPC,
-  KC_LCTL,       _________________DVORAK_L2_________________, _________________DVORAK_R2_________________, KC_ENT,
-  KC_LSFT,       _________________DVORAK_L3_________________, _________________DVORAK_R3_________________, LT_RAI(KC_MINS),
-  KC_ESC,        KC_CAPS, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE, KC_RALT, TG_NUMLAY, KC_APP,  KC_DEL
+  LT_FN(KC_TAB),  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+  KC_LCTL, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    LT_MC(KC_S),    KC_ENT,
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z, LT_RAI(KC_MINS),
+  KC_ESC,  KC_CAPS, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE, KC_RALT, TG_NUMLAY, KC_APP,  KC_DEL
 ),
  
 /* Lower
@@ -79,9 +79,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_LOWER] = LAYOUT_planck_grid(
-  ________________NUMBER_LEFT________________, ________________NUMBER_RIGHT_______________,    KC_GRV,  KC_BSLS,
-  _______, __________________LONG_FUNC_LEFT___________________,   KC_UNDS, KC_EQL,  KC_LBRC, KC_RBRC, KC_PIPE,
-  _______, __________________LONG_FUNC_RIGHT__________________,S(KC_NUHS),S(KC_NUBS),KC_LCBR, KC_RCBR, _______,
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_GRV,  KC_BSLS,
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_EQL,  KC_LBRC, KC_RBRC, KC_PIPE,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),KC_LCBR, KC_RCBR, _______,
   _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
  
@@ -97,7 +97,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_RAISE] = LAYOUT_planck_grid(
-  ________________NUMBER_LEFT________________, ________________NUMBER_RIGHT_______________,    KC_PLUS,  KC_BSLS,
+  KC_1,    KC_2,    KC_3,    KC_4,     KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_PLUS,  KC_BSLS,
   _______, KC_A,    KC_UP,   KC_D,    KC_PSCR,  KC_VOLU, KC_4,    KC_5,    KC_6,    KC_PAST, KC_COLN, KC_QUOT,
   _______, KC_LEFT, KC_DOWN, KC_RIGHT,KC__MUTE, KC_VOLD, KC_1,    KC_2,    KC_3,    KC_UP, KC_SLSH,   _______,
   _______, _______, _______, _______, _______, KC_SPC,  KC_0,   _______,  KC_LEFT, KC_DOWN, KC_RIGHT,   KC_NLCK
@@ -135,8 +135,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_FNLAYER] = LAYOUT_planck_grid(
   _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PLUS,
-  _______, __________________LONG_FUNC_LEFT___________________,   KC_UNDS, KC_EQL,  KC_LBRC, KC_RBRC, KC_QUOT,
-  _______, __________________LONG_FUNC_RIGHT__________________,S(KC_NUHS),S(KC_NUBS),KC_LCBR, KC_RCBR, _______,
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_EQL,  KC_LBRC, KC_RBRC, KC_QUOT,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),KC_LCBR, KC_RCBR, _______,
   _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
  

keyboards/planck/keymaps/spacebarracecar/keymap.c

@@ -6,8 +6,8 @@
 
 enum layers {
   _BASE,
-  _RAISE,
   _LOWER,
+  _RAISE,
   _MUSICMODE
 };
 
@@ -46,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_LOWER] = LAYOUT_ortho_4x12(
   DE_TILD,  DE_EXLM,  DE_DQOT,  DE_HASH,  DE_DLR,   DE_PERC,  CU_CIRC,  DE_AMPR,  DE_ASTR,  DE_LPRN,  DE_RPRN,  _______,
   _______,  DE_AT,    CTRLX,    CTRLC,    CTRLV,    XXXXXXX,  XXXXXXX,  DE_UNDS,  DE_PLUS,  DE_LCBR,  DE_RCBR,  DE_PIPE,
-  _______,  DE_EURO,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  DE_MINS,  CU_EQL,   CU_LBRC,  CU_RBRC,  _______,
+  _______,  DE_EURO,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,  _______,  _______,  _______,
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
 ),
 
@@ -65,7 +65,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_RAISE] = LAYOUT_ortho_4x12(
   CU_GRV,   DE_1,     DE_2,     CU_3,     DE_4,     DE_5,     CU_6,     CU_7,     CU_8,     CU_9,     CU_0,     _______,
   _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    DE_MINS,  CU_EQL,   CU_LBRC,  CU_RBRC,  CU_BSLS,
-  _______,  KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   XXXXXXX,  _______,  _______,  _______,  _______,
+  _______,  KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   _______,  _______,  _______,  _______,  _______,
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
 ),
 
@@ -97,21 +97,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Navigation
 ,-----------------------------------------------------------------------------------------------------------------------.
-|ALT F4   |PageDown |Up       |PageUp   |Home     |         |         |         |Win+Up   |         |         |Del      |
+|ESCT     |PageDown |Up       |PageUp   |Home     |         |         |         |Win+Up   |         |         |Del      |
 |---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
 |         |Left     |Down     |Right    |End      |         |         |Win+Left |Win+Down |Win+Right|         |Enter    |
 |---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
 |         |Prev     |Pause    |Next     |LowerVol |RaiseVol |Mute     |         |         |         |         |         |
 |---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|RESET    |ESCT     |         |         |         |         |         |         |         |         |         |Game     |
+|RESET    |         |         |         |         |         |         |         |         |         |         |Game     |
 `-----------------------------------------------------------------------------------------------------------------------'
 */
 
 [_NAV] = LAYOUT_ortho_4x12(
-  ALTF4,    KC_PGDN,  KC_UP,    KC_PGUP,  KC_HOME,  XXXXXXX,  XXXXXXX,  XXXXXXX,  GUIU,     XXXXXXX,  XXXXXXX,  KC_DEL,
+  CU_ESCT,  KC_PGDN,  KC_UP,    KC_PGUP,  KC_HOME,  XXXXXXX,  XXXXXXX,  XXXXXXX,  GUIU,     XXXXXXX,  XXXXXXX,  KC_DEL,
   _______,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_END,   XXXXXXX,  XXXXXXX,  GUIL,     GUID,     GUIR,     XXXXXXX,  KC_ENT,
   _______,  KC_MPRV,  KC_MPLY,  KC_MNXT,  KC_VOLD,  KC_VOLU,  KC_MUTE,  MU_ON,    XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,
-  RESET,    CU_ESCT,  _______,  _______,  _______,  KC_SPC,   KC_ENT,   _______,  _______,  _______,  _______,  CU_GAME
+  RESET,    _______,  _______,  _______,  _______,  KC_SPC,   KC_ENT,   _______,  _______,  _______,  _______,  CU_GAME
 )
 
 };
@@ -129,17 +129,6 @@ switch (keycode) {
     } else {
       return true;
     }
-  case KC_LALT:
-    if (game) {
-      if (record->event.pressed){
-        layer_on(_RAISE);
-      } else {
-        layer_off(_RAISE);
-      }
-      return false;
-    } else {
-      return true;
-    }
   case MU_ON:
     if(record->event.pressed) {
       layer_off(_LOWER);

keyboards/planck/rev6/boards/GENERIC_STM32_F303XC/board.c

@@ -0,0 +1,126 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief   SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif /* HAL_USE_SDC */
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}

keyboards/planck/rev6/boards/GENERIC_STM32_F303XC/board.h

@@ -18,14 +18,14 @@
 #define _BOARD_H_
 
 /*
- * Setup for Generic STM32_F303 Board
+ * Setup for Clueboard 60% Keyboard
  */
 
 /*
  * Board identifier.
  */
 #define BOARD_GENERIC_STM32_F303XC
-#define BOARD_NAME                  "STM32_F303"
+#define BOARD_NAME                  "Planck PCB"
 
 /*
  * Board oscillators-related settings.

keyboards/planck/rev6/boards/GENERIC_STM32_F303XC/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

keyboards/planck/rev6/bootloader_defs.h

@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800

keyboards/planck/rev6/chconf.h

@@ -0,0 +1,520 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        TRUE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/planck/rev6/halconf.h

@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI                FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/planck/rev6/mcuconf.h

@@ -0,0 +1,257 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_UART4SW                       STM32_UART4SW_PCLK
+#define STM32_UART5SW                       STM32_UART5SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+#undef STM32_HSE_BYPASS
+// #error "oh no"
+// #endif
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_USE_ADC4                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC4_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC4_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  TRUE
+#define STM32_GPT_USE_TIM7                  TRUE
+#define STM32_GPT_USE_TIM8                  TRUE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  TRUE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* MCUCONF_H */

keyboards/planck/rev6/rules.mk

@@ -2,8 +2,41 @@
 SRC =	matrix.c
 LAYOUTS += ortho_4x12
 
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F3xx
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F303xC
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f3xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = GENERIC_STM32_F303XC
+
 # Cortex version
-MCU  = STM32F303
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+
+USE_FPU = yes
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
 
 # Build Options
 #   comment out to disable the options.

keyboards/planck/rules.mk

@@ -1,6 +1,39 @@
 # MCU name
+#MCU = at90usb1287
 MCU = atmega32u4
 
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
 #     different sizes, comment this out, and the correct address will be loaded

keyboards/primekb/prime_o/keymaps/spacebarracecar/keymap.c

@@ -8,257 +8,14 @@
 
 enum layers {
   _BASE,
-  _RAISE,
   _LOWER,
+  _RAISE,
   _GAME = _NAV+1
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-#ifdef LEFTNUM
-
-/* Base
-,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
-|-        |*        |/        |Numlock  |`        |1        |2        |3        |4        |5        |6        |7        |8        |9        |0        |\        |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|+        |7        |8        |9        |Tab      |Q        |W        |E        |R        |T        |Z        |U        |I        |O        |P        |Backspace|
-|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|=        |4        |5        |6        |Esc/Nav  |A        |S        |D        |F        |G        |H        |J        |K        |L        |;        |'        |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|Enter    |1        |2        |3        |(/LShift |Y        |X        |C        |V        |B        |N        |M        |,        |.        |/        |)/RShift |
-|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|Backspace|.        |0        |00       |RCtrl    |         |Alt      |Win      |Lower    |Space    |Enter    |Raise    |Win      |AltGr    |         |LCtrl    |
-`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
-*/
-
-[_BASE] = LAYOUT(
-  KC_PMNS,  KC_PAST,  KC_PSLS,  KC_NLCK,  CU_GRV,   DE_1,     DE_2,     CU_3,     DE_4,     DE_5,     CU_6,     CU_7,     CU_8,     CU_9,     CU_0,     CU_BSLS,
-  KC_PPLS,  KC_P7,    KC_P8,    KC_P9,    KC_TAB,   DE_Q,     DE_W,     DE_E,     DE_R,     DE_T,     CU_Z,     DE_U,     DE_I,     DE_O,     DE_P,     KC_BSPC,
-  CU_EQL,   KC_P4,    KC_P5,    KC_P6,    CU_NAV,   DE_A,     DE_S,     DE_D,     DE_F,     DE_G,     DE_H,     DE_J,     DE_K,     DE_L,     CU_SCLN,  CU_QUOT,
-  KC_PENT,  KC_P1,    KC_P2,    KC_P3,    CU_LSFT,  CU_Y,     DE_X,     DE_C,     DE_V,     DE_B,     DE_N,     DE_M,     CU_COMM,  CU_DOT,   CU_SLSH,  CU_RSFT,
-  KC_BSPC,  KC_PDOT,  KC_P0,    KC_P00,   KC_LCTL,  XXXXXXX,  KC_LGUI,  KC_LALT,  LOWER,    KC_SPC,   KC_ENT,   RAISE,    KC_RALT,  KC_RGUI,  KC_APP,   KC_RCTL
-),
-
-/* Lower
-,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
-|-        |*        |/        |Numlock  |`        |1        |2        |3        |4        |5        |6        |7        |8        |9        |0        |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|+        |7        |8        |9        |~        |!        |"        |#        |$        |%        |^        |&        |*        |(        |)        |         |
-|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|=        |4        |5        |6        |         |@        |Strg+X   |Strg+C   |Strg+V   |         |         |_        |+        |{        |}        ||        |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|Enter    |1        |2        |3        |         |?        |         |         |         |         |         |         |         |         |         |         |
-|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|Backspace|.        |0        |00       |         |         |         |         |         |         |         |         |         |         |         |         |
-`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
-*/
-
-[_LOWER] = LAYOUT(
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-  _______,  _______,  _______,  _______,  DE_TILD,  DE_EXLM,  DE_DQOT,  DE_HASH,  DE_DLR,   DE_PERC,  CU_CIRC,  DE_AMPR,  DE_ASTR,  DE_LPRN,  DE_RPRN,  _______,
-  _______,  _______,  _______,  _______,  _______,  DE_AT,    CTRLX,    CTRLC,    CTRLV,    XXXXXXX,  XXXXXXX,  DE_UNDS,  DE_PLUS,  DE_LCBR,  DE_RCBR,  DE_PIPE,
-  _______,  _______,  _______,  _______,  _______,  DE_EURO,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  DE_MINS,  CU_EQL,   CU_LBRC,  CU_RBRC,  _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
-),
-
-/* Raise
-,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
-|-        |*        |/        |Numlock  |`        |1        |2        |3        |4        |5        |6        |7        |8        |9        |0        |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|+        |7        |8        |9        |`        |1        |2        |3        |4        |5        |6        |7        |8        |9        |0        |         |
-|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|=        |4        |5        |6        |         |F1       |F2       |F3       |F4       |F5       |F6       |-        |=        |[        |]        |\        |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|Enter    |1        |2        |3        |         |F7       |F8       |F9       |F10      |F11      |F12      |         |         |         |         |         |
-|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|Backspace|.        |0        |00       |         |         |         |         |         |         |         |         |         |         |         |         |
-`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
-*/
-
-[_RAISE] = LAYOUT(
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-  _______,  _______,  _______,  _______,  CU_GRV,   DE_1,     DE_2,     CU_3,     DE_4,     DE_5,     CU_6,     CU_7,     CU_8,     CU_9,     CU_0,     _______,
-  _______,  _______,  _______,  _______,  _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    DE_MINS,  CU_EQL,   CU_LBRC,  CU_RBRC,  CU_BSLS,
-  _______,  _______,  _______,  _______,  _______,  KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   XXXXXXX,  _______,  _______,  _______,  _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
-),
-
-/* Deadkey
-,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
-|-        |*        |/        |Numlock  |         |         |         |         |         |         |         |         |         |         |         |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|+        |7        |8        |9        |         |         |         |         |         |         |         |Ü        |         |Ö        |         |         |
-|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|=        |4        |5        |6        |         |Ä        |ß        |         |         |         |         |         |         |         |         |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|Enter    |1        |2        |3        |         |         |         |         |         |         |         |         |         |         |         |         |
-|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|Backspace|.        |0        |00       |         |         |         |         |         |"        |"        |         |         |         |         |         |
-`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
-*/
-
-[_DEADKEY] = LAYOUT(
-  _______,  _______,  _______,  _______,  CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,
-  _______,  _______,  _______,  _______,  KC_TAB,   CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_UE,    CU_ED,    CU_OE,    CU_ED,    _______,
-  _______,  _______,  _______,  _______,  _______,  CU_AE,    CU_SS,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_DDQ,
-  _______,  _______,  _______,  _______,  _______,  CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  CU_DDQ,   CU_DDQ,   _______,  _______,  _______,  _______,  _______
-),
-
-/* Navigation
-,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
-|-        |*        |/        |Numlock  |Escape   |         |         |         |         |         |         |         |         |         |         |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|+        |7        |8        |9        |ALT F4   |PageDown |Up       |PageUp   |Home     |         |         |         |Win+Up   |         |         |Del      |
-|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|=        |4        |5        |6        |         |Left     |Down     |Right    |End      |         |         |Win+Left |Win+Down |Win+Right|         |Enter    |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|Enter    |1        |2        |3        |         |Prev     |Pause    |Next     |LowerVol |RaiseVol |Mute     |         |         |         |         |         |
-|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|Backspace|.        |0        |00       |RESET    |ESCT     |         |         |         |         |         |         |         |         |         |Game     |
-`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
-*/
-
-[_NAV] = LAYOUT(
-  _______,  _______,  _______,  _______,  KC_ESC,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
-  _______,  _______,  _______,  _______,  ALTF4,    KC_PGDN,  KC_UP,    KC_PGUP,  KC_HOME,  XXXXXXX,  XXXXXXX,  XXXXXXX,  GUIU,     XXXXXXX,  XXXXXXX,  KC_DEL,
-  _______,  _______,  _______,  _______,  _______,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_END,   XXXXXXX,  XXXXXXX,  GUIL,     GUID,     GUIR,     XXXXXXX,  KC_ENT,
-  _______,  _______,  _______,  _______,  _______,  KC_MPRV,  KC_MPLY,  KC_MNXT,  KC_VOLD,  KC_VOLU,  KC_MUTE,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,
-  _______,  _______,  _______,  _______,  RESET,    CU_ESCT,  _______,  _______,  _______,  KC_SPC,   KC_ENT,   _______,  _______,  _______,  _______,  CU_GAME
-),
-
-// Can be used to place macros on the numpad
-[_GAME] = LAYOUT(
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
-)
-
-#elif defined CENTERNUM
-
-/* Base
-,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
-|`        |1        |2        |3        |4        |5        |Numlock  |/        |*        |=        |6        |7        |8        |9        |0        |\        |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|Tab      |Q        |W        |E        |R        |T        |7        |8        |9        |-        |Z        |U        |I        |O        |P        |Backspace|
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|Esc/Nav  |A        |S        |D        |F        |G        |4        |5        |6        |+        |H        |J        |K        |L        |;        |'        |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|(/LShift |Y        |X        |C        |V        |B        |1        |2        |3        |Enter    |N        |M        |,        |.        |/        |)/RShift |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|RCtrl    |         |Alt      |Win      |Lower    |Space    |00       |0        |.        |Tab      |Enter    |Raise    |Win      |AltGr    |         |LCtrl    |
-`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
-*/
-
-[_BASE] = LAYOUT(
-  CU_GRV,   DE_1,     DE_2,     CU_3,     DE_4,     DE_5,     KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,  CU_6,     CU_7,     CU_8,     CU_9,     CU_0,     CU_BSLS,
-  KC_TAB,   DE_Q,     DE_W,     DE_E,     DE_R,     DE_T,     KC_P7,    KC_P8,    KC_P9,    KC_PPLS,  CU_Z,     DE_U,     DE_I,     DE_O,     DE_P,     KC_BSPC,
-  CU_NAV,   DE_A,     DE_S,     DE_D,     DE_F,     DE_G,     KC_P4,    KC_P5,    KC_P6,    CU_EQL,   DE_H,     DE_J,     DE_K,     DE_L,     CU_SCLN,  CU_QUOT,
-  CU_LSFT,  CU_Y,     DE_X,     DE_C,     DE_V,     DE_B,     KC_P1,    KC_P2,    KC_P3,    KC_PENT,  DE_N,     DE_M,     CU_COMM,  CU_DOT,   CU_SLSH,  CU_RSFT,
-  KC_LCTL,  XXXXXXX,  KC_LGUI,  KC_LALT,  LOWER,    KC_SPC,   KC_P00,   KC_P0,    KC_PDOT,  KC_TAB,   KC_ENT,   RAISE,    KC_RALT,  KC_RGUI,  KC_APP,   KC_RCTL
-),
-
-/* Lower
-,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
-|`        |1        |2        |3        |4        |5        |Numlock  |/        |*        |-        |6        |7        |8        |9        |0        |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|~        |!        |"        |#        |$        |%        |7        |8        |9        |+        |^        |&        |*        |(        |)        |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|         |@        |Strg+X   |Strg+C   |Strg+V   |         |4        |5        |6        |=        |         |_        |+        |{        |}        ||        |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|         |?        |         |         |         |         |1        |2        |3        |Enter    |         |         |         |         |         |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|         |         |         |         |         |         |00       |0        |.        |Tab      |         |         |         |         |         |         |
-`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
-*/
-
-[_LOWER] = LAYOUT(
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-  DE_TILD,  DE_EXLM,  DE_DQOT,  DE_HASH,  DE_DLR,   DE_PERC,  _______,  _______,  _______,  _______,  CU_CIRC,  DE_AMPR,  DE_ASTR,  DE_LPRN,  DE_RPRN,  _______,
-  _______,  DE_AT,    CTRLX,    CTRLC,    CTRLV,    XXXXXXX,  _______,  _______,  _______,  _______,  XXXXXXX,  DE_UNDS,  DE_PLUS,  DE_LCBR,  DE_RCBR,  DE_PIPE,
-  _______,  DE_EURO,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,  _______,  _______,  _______,  XXXXXXX,  DE_MINS,  CU_EQL,   CU_LBRC,  CU_RBRC,  _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
-),
-
-/* Raise
-,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
-|`        |1        |2        |3        |4        |5        |Numlock  |/        |*        |-        |6        |7        |8        |9        |0        |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|`        |1        |2        |3        |4        |5        |7        |8        |9        |+        |6        |7        |8        |9        |0        |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|         |F1       |F2       |F3       |F4       |F5       |4        |5        |6        |=        |F6       |-        |=        |[        |]        |\        |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|         |F7       |F8       |F9       |F10      |F11      |1        |2        |3        |Enter    |F12      |         |         |         |         |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|         |         |         |         |         |         |00       |0        |.        |Tab      |         |         |         |         |         |         |
-`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
-*/
-
-[_RAISE] = LAYOUT(
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-  CU_GRV,   DE_1,     DE_2,     CU_3,     DE_4,     DE_5,     _______,  _______,  _______,  _______,  CU_6,     CU_7,     CU_8,     CU_9,     CU_0,     _______,
-  _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    _______,  _______,  _______,  _______,  KC_F6,    DE_MINS,  CU_EQL,   CU_LBRC,  CU_RBRC,  CU_BSLS,
-  _______,  KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   _______,  _______,  _______,  _______,  KC_F12,   XXXXXXX,  _______,  _______,  _______,  _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
-),
-
-/* Deadkey
-,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
-|         |         |         |         |         |         |Numlock  |/        |*        |-        |         |         |         |         |         |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|         |         |         |         |         |         |7        |8        |9        |+        |         |Ü        |         |Ö        |         |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|         |Ä        |ß        |         |         |         |4        |5        |6        |=        |         |         |         |         |         |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|         |         |         |         |         |         |1        |2        |3        |Enter    |         |         |         |         |         |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|         |         |         |         |         |"        |00       |0        |.        |Tab      |"        |         |         |         |         |         |
-`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
-*/
-
-[_DEADKEY] = LAYOUT(
-  CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    _______,  _______,  _______,  _______,  CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,
-  KC_TAB,   CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    _______,  _______,  _______,  _______,  CU_ED,    CU_UE,    CU_ED,    CU_OE,    CU_ED,    _______,
-  _______,  CU_AE,    CU_SS,    CU_ED,    CU_ED,    CU_ED,    _______,  _______,  _______,  _______,  CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_DDQ,
-  _______,  CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    _______,  _______,  _______,  _______,  CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    _______,
-  _______,  _______,  _______,  _______,  _______,  CU_DDQ,   _______,  _______,  _______,  _______,  CU_DDQ,   _______,  _______,  _______,  _______,  _______
-),
-
-/* Navigation
-,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
-|Escape   |         |         |         |         |         |Numlock  |/        |*        |-        |         |         |         |         |         |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|ALT F4   |PageDown |Up       |PageUp   |Home     |         |7        |8        |9        |+        |         |         |Win+Up   |         |         |Del      |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|         |Left     |Down     |Right    |End      |         |4        |5        |6        |=        |         |Win+Left |Win+Down |Win+Right|         |Enter    |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|         |Prev     |Pause    |Next     |LowerVol |RaiseVol |1        |2        |3        |Enter    |Mute     |         |         |         |         |         |
-|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|RESET    |ESCT     |         |         |         |         |00       |0        |.        |Tab      |         |         |         |         |         |Game     |
-`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
-*/
-
-[_NAV] = LAYOUT(
-  KC_ESC,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,  _______,  _______,  _______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
-  ALTF4,    KC_PGDN,  KC_UP,    KC_PGUP,  KC_HOME,  XXXXXXX,  _______,  _______,  _______,  _______,  XXXXXXX,  XXXXXXX,  GUIU,     XXXXXXX,  XXXXXXX,  KC_DEL,
-  _______,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_END,   XXXXXXX,  _______,  _______,  _______,  _______,  XXXXXXX,  GUIL,     GUID,     GUIR,     XXXXXXX,  KC_ENT,
-  _______,  KC_MPRV,  KC_MPLY,  KC_MNXT,  KC_VOLD,  KC_VOLU,  _______,  _______,  _______,  _______,  KC_MUTE,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,
-  RESET,    CU_ESCT,  _______,  _______,  _______,  KC_SPC,   _______,  _______,  _______,  _______,  KC_ENT,   _______,  _______,  _______,  _______,  CU_GAME
-),
-
-// Can be used to place macros on the numpad
-[_GAME] = LAYOUT(
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
-)
-
-#else
-
+#ifndef LEFTNUM
 /* Base
 ,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
 |`        |1        |2        |3        |4        |5        |6        |7        |8        |9        |0        |\        |Numlock  |/        |*        |=        |
@@ -276,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_BASE] = LAYOUT(
   CU_GRV,   DE_1,     DE_2,     CU_3,     DE_4,     DE_5,     CU_6,     CU_7,     CU_8,     CU_9,     CU_0,     CU_BSLS,  KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,
   KC_TAB,   DE_Q,     DE_W,     DE_E,     DE_R,     DE_T,     CU_Z,     DE_U,     DE_I,     DE_O,     DE_P,     KC_BSPC,  KC_P7,    KC_P8,    KC_P9,    KC_PPLS,
-  CU_NAV,   DE_A,     DE_S,     DE_D,     DE_F,     DE_G,     DE_H,     DE_J,     DE_K,     DE_L,     CU_SCLN,  CU_QUOT,  KC_P4,    KC_P5,    KC_P6,    CU_EQL,
+  CU_NAV,   DE_A,     DE_S,     DE_D,     DE_F,     DE_G,     DE_H,     DE_J,     DE_K,     DE_L,     CU_SCLN,  CU_QUOT,  KC_P4,    KC_P5,    KC_P6,    KC_PEQL,
   CU_LSFT,  CU_Y,     DE_X,     DE_C,     DE_V,     DE_B,     DE_N,     DE_M,     CU_COMM,  CU_DOT,   CU_SLSH,  CU_RSFT,  KC_P1,    KC_P2,    KC_P3,    KC_PENT,
   KC_LCTL,  XXXXXXX,  KC_LGUI,  KC_LALT,  LOWER,    KC_SPC,   KC_ENT,   RAISE,    KC_RALT,  KC_RGUI,  KC_APP,   KC_RCTL,  KC_P00,   KC_P0,    KC_PDOT,  KC_TAB
 ),
@@ -299,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
   DE_TILD,  DE_EXLM,  DE_DQOT,  DE_HASH,  DE_DLR,   DE_PERC,  CU_CIRC,  DE_AMPR,  DE_ASTR,  DE_LPRN,  DE_RPRN,  _______,  _______,  _______,  _______,  _______,
   _______,  DE_AT,    CTRLX,    CTRLC,    CTRLV,    XXXXXXX,  XXXXXXX,  DE_UNDS,  DE_PLUS,  DE_LCBR,  DE_RCBR,  DE_PIPE,  _______,  _______,  _______,  _______,
-  _______,  DE_EURO,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  DE_MINS,  CU_EQL,   CU_LBRC,  CU_RBRC,  _______,  _______,  _______,  _______,  _______,
+  _______,  DE_EURO,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
 ),
 
@@ -321,7 +78,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
   CU_GRV,   DE_1,     DE_2,     CU_3,     DE_4,     DE_5,     CU_6,     CU_7,     CU_8,     CU_9,     CU_0,     _______,  _______,  _______,  _______,  _______,
   _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    DE_MINS,  CU_EQL,   CU_LBRC,  CU_RBRC,  CU_BSLS,  _______,  _______,  _______,  _______,
-  _______,  KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   XXXXXXX,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
 ),
 
@@ -351,22 +108,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 ,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
 |Escape   |         |         |         |         |         |         |         |         |         |         |         |Numlock  |/        |*        |-        |
 |---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|ALT F4   |PageDown |Up       |PageUp   |Home     |         |         |         |Win+Up   |         |         |Del      |7        |8        |9        |+        |
+|ESCT     |PageDown |Up       |PageUp   |Home     |         |         |         |Win+Up   |         |         |Del      |7        |8        |9        |+        |
 |---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
 |         |Left     |Down     |Right    |End      |         |         |Win+Left |Win+Down |Win+Right|         |Enter    |4        |5        |6        |=        |
 |---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
 |         |Prev     |Pause    |Next     |LowerVol |RaiseVol |Mute     |         |         |         |         |         |1        |2        |3        |Enter    |
 |---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
-|RESET    |ESCT     |         |         |         |         |         |         |         |         |         |Game     |00       |0        |.        |Tab      |
+|RESET    |         |         |         |         |         |         |         |         |         |         |Game     |00       |0        |.        |Tab      |
 `---------------------------------------------------------------------------------------------------------------------------------------------------------------'
 */
 
 [_NAV] = LAYOUT(
   KC_ESC,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,  _______,  _______,  _______,
-  ALTF4,    KC_PGDN,  KC_UP,    KC_PGUP,  KC_HOME,  XXXXXXX,  XXXXXXX,  XXXXXXX,  GUIU,     XXXXXXX,  XXXXXXX,  KC_DEL,   _______,  _______,  _______,  _______,
+  CU_ESCT,  KC_PGDN,  KC_UP,    KC_PGUP,  KC_HOME,  XXXXXXX,  XXXXXXX,  XXXXXXX,  GUIU,     XXXXXXX,  XXXXXXX,  KC_DEL,   _______,  _______,  _______,  _______,
   _______,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_END,   XXXXXXX,  XXXXXXX,  GUIL,     GUID,     GUIR,     XXXXXXX,  KC_ENT,   _______,  _______,  _______,  _______,
   _______,  KC_MPRV,  KC_MPLY,  KC_MNXT,  KC_VOLD,  KC_VOLU,  KC_MUTE,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,  _______,  _______,  _______,  _______,
-  RESET,    CU_ESCT,  _______,  _______,  _______,  KC_SPC,   KC_ENT,   _______,  _______,  _______,  _______,  CU_GAME,  _______,  _______,  _______,  _______
+  RESET,    _______,  _______,  _______,  _______,  KC_SPC,   KC_ENT,   _______,  _______,  _______,  _______,  CU_GAME,  _______,  _______,  _______,  _______
 ),
 
 // Can be used to place macros on the numpad
@@ -377,7 +134,127 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
 )
+#endif
 
+#ifdef LEFTNUM
+/* Base
+,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
+|-        |*        |/        |Numlock  |`        |1        |2        |3        |4        |5        |6        |7        |8        |9        |0        |\        |
+|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|+        |7        |8        |9        |Tab      |Q        |W        |E        |R        |T        |Z        |U        |I        |O        |P        |Backspace|
+|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|=        |4        |5        |6        |Esc/Nav  |A        |S        |D        |F        |G        |H        |J        |K        |L        |;        |'        |
+|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|Enter    |1        |2        |3        |(/LShift |Y        |X        |C        |V        |B        |N        |M        |,        |.        |/        |)/RShift |
+|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|Backspace|.        |0        |00       |RCtrl    |         |Alt      |Win      |Lower    |Space    |Enter    |Raise    |Win      |AltGr    |         |LCtrl    |
+`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
+*/
+
+[_BASE] = LAYOUT(
+  KC_PMNS,  KC_PAST,  KC_PSLS,  KC_NLCK,  CU_GRV,   DE_1,     DE_2,     CU_3,     DE_4,     DE_5,     CU_6,     CU_7,     CU_8,     CU_9,     CU_0,     CU_BSLS,
+  KC_PPLS,  KC_P7,    KC_P8,    KC_P9,    KC_TAB,   DE_Q,     DE_W,     DE_E,     DE_R,     DE_T,     CU_Z,     DE_U,     DE_I,     DE_O,     DE_P,     KC_BSPC,
+  KC_PEQL,  KC_P4,    KC_P5,    KC_P6,    CU_NAV,   DE_A,     DE_S,     DE_D,     DE_F,     DE_G,     DE_H,     DE_J,     DE_K,     DE_L,     CU_SCLN,  CU_QUOT,
+  KC_PENT,  KC_P1,    KC_P2,    KC_P3,    CU_LSFT,  CU_Y,     DE_X,     DE_C,     DE_V,     DE_B,     DE_N,     DE_M,     CU_COMM,  CU_DOT,   CU_SLSH,  CU_RSFT,
+  KC_BSPC,  KC_PDOT,  KC_P0,    KC_P00,   KC_LCTL,  XXXXXXX,  KC_LGUI,  KC_LALT,  LOWER,    KC_SPC,   KC_ENT,   RAISE,    KC_RALT,  KC_RGUI,  KC_APP,   KC_RCTL
+),
+
+/* Lower
+,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
+|-        |*        |/        |Numlock  |`        |1        |2        |3        |4        |5        |6        |7        |8        |9        |0        |         |
+|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|+        |7        |8        |9        |~        |!        |"        |#        |$        |%        |^        |&        |*        |(        |)        |         |
+|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|=        |4        |5        |6        |         |@        |Strg+X   |Strg+C   |Strg+V   |         |         |_        |+        |{        |}        ||        |
+|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|Enter    |1        |2        |3        |         |?        |         |         |         |         |         |         |         |         |         |         |
+|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|Backspace|.        |0        |00       |         |         |         |         |         |         |         |         |         |         |         |         |
+`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
+*/
+
+[_LOWER] = LAYOUT(
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,  _______,  _______,  DE_TILD,  DE_EXLM,  DE_DQOT,  DE_HASH,  DE_DLR,   DE_PERC,  CU_CIRC,  DE_AMPR,  DE_ASTR,  DE_LPRN,  DE_RPRN,  _______,
+  _______,  _______,  _______,  _______,  _______,  DE_AT,    CTRLX,    CTRLC,    CTRLV,    XXXXXXX,  XXXXXXX,  DE_UNDS,  DE_PLUS,  DE_LCBR,  DE_RCBR,  DE_PIPE,
+  _______,  _______,  _______,  _______,  _______,  DE_EURO,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,  _______,  _______,  _______,
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
+),
+
+/* Raise
+,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
+|-        |*        |/        |Numlock  |`        |1        |2        |3        |4        |5        |6        |7        |8        |9        |0        |         |
+|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|+        |7        |8        |9        |`        |1        |2        |3        |4        |5        |6        |7        |8        |9        |0        |         |
+|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|=        |4        |5        |6        |         |F1       |F2       |F3       |F4       |F5       |F6       |-        |=        |[        |]        |\        |
+|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|Enter    |1        |2        |3        |         |F7       |F8       |F9       |F10      |F11      |F12      |         |         |         |         |         |
+|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|Backspace|.        |0        |00       |         |         |         |         |         |         |         |         |         |         |         |         |
+`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
+*/
+
+[_RAISE] = LAYOUT(
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,  _______,  _______,  CU_GRV,   DE_1,     DE_2,     CU_3,     DE_4,     DE_5,     CU_6,     CU_7,     CU_8,     CU_9,     CU_0,     _______,
+  _______,  _______,  _______,  _______,  _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    DE_MINS,  CU_EQL,   CU_LBRC,  CU_RBRC,  CU_BSLS,
+  _______,  _______,  _______,  _______,  _______,  KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   _______,  _______,  _______,  _______,  _______,
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
+),
+
+/* Deadkey
+,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
+|-        |*        |/        |Numlock  |         |         |         |         |         |         |         |         |         |         |         |         |
+|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|+        |7        |8        |9        |         |         |         |         |         |         |         |Ü        |         |Ö        |         |         |
+|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|=        |4        |5        |6        |         |Ä        |ß        |         |         |         |         |         |         |         |         |         |
+|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|Enter    |1        |2        |3        |         |         |         |         |         |         |         |         |         |         |         |         |
+|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|Backspace|.        |0        |00       |         |         |         |         |         |"        |"        |         |         |         |         |         |
+`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
+*/
+
+[_DEADKEY] = LAYOUT(
+  _______,  _______,  _______,  _______,  CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,
+  _______,  _______,  _______,  _______,  KC_TAB,   CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_UE,    CU_ED,    CU_OE,    CU_ED,    _______,
+  _______,  _______,  _______,  _______,  _______,  CU_AE,    CU_SS,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_DDQ,
+  _______,  _______,  _______,  _______,  _______,  CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    CU_ED,    _______,
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  CU_DDQ,   CU_DDQ,   _______,  _______,  _______,  _______,  _______
+),
+
+/* Navigation
+,---------------------------------------------------------------------------------------------------------------------------------------------------------------.
+|-        |*        |/        |Numlock  |Escape   |         |         |         |         |         |         |         |         |         |         |         |
+|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|+        |7        |8        |9        |ESCT     |PageDown |Up       |PageUp   |Home     |         |         |         |Win+Up   |         |         |Del      |
+|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|=        |4        |5        |6        |         |Left     |Down     |Right    |End      |         |         |Win+Left |Win+Down |Win+Right|         |Enter    |
+|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|Enter    |1        |2        |3        |         |Prev     |Pause    |Next     |LowerVol |RaiseVol |Mute     |         |         |         |         |         |
+|---------+---------+---------+---------|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------|
+|Backspace|.        |0        |00       |RESET    |         |         |         |         |         |         |         |         |         |         |Game     |
+`---------------------------------------------------------------------------------------------------------------------------------------------------------------'
+*/
+
+[_NAV] = LAYOUT(
+  _______,  _______,  _______,  _______,  KC_ESC,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+  _______,  _______,  _______,  _______,  CU_ESCT,  KC_PGDN,  KC_UP,    KC_PGUP,  KC_HOME,  XXXXXXX,  XXXXXXX,  XXXXXXX,  GUIU,     XXXXXXX,  XXXXXXX,  KC_DEL,
+  _______,  _______,  _______,  _______,  _______,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_END,   XXXXXXX,  XXXXXXX,  GUIL,     GUID,     GUIR,     XXXXXXX,  KC_ENT,
+  _______,  _______,  _______,  _______,  _______,  KC_MPRV,  KC_MPLY,  KC_MNXT,  KC_VOLD,  KC_VOLU,  KC_MUTE,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,
+  _______,  _______,  _______,  _______,  RESET,    _______,  _______,  _______,  _______,  KC_SPC,   KC_ENT,   _______,  _______,  _______,  _______,  CU_GAME
+),
+
+// Can be used to place macros on the numpad
+[_GAME] = LAYOUT(
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
+)
 #endif
 
 };
@@ -395,17 +272,6 @@ switch (keycode) {
     } else {
       return true;
     }
-  case KC_LALT:
-    if (game) {
-      if (record->event.pressed){
-        layer_on(_RAISE);
-      } else {
-        layer_off(_RAISE);
-      }
-      return false;
-    } else {
-      return true;
-    }
   case CU_GAME:
     if(record->event.pressed) {
       if (game)

keyboards/primekb/prime_o/keymaps/spacebarracecar/readme.md

@@ -3,4 +3,4 @@
 This keymap emulates most keys of the US-International layout on PCs that have German set as input language.  
 This allows the use of the keyboard on any PC in Germany without the need to change any settings.
 The keymap is mostly based on the Planck default layout but adds essential features for german input, like access to Ä, Ö, Ü, ß.
-Righthand numpad is enabled by default, enable lefthand numpad with #define LEFTNUM and center numpad with #define CENTERNUM.
+Righthand Numpad is enabled by default, enable lefthand Numpad with #define LEFTNUM.

keyboards/proton_c/config.h

@@ -33,6 +33,7 @@
 #define MATRIX_ROW_PINS { B9 }
 #define MATRIX_COL_PINS { B0 }
 
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 6
 

keyboards/rama/m60_a/rules.mk

@@ -54,7 +54,7 @@ BOOTLOADER = atmel-dfu
 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
+#   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -68,7 +68,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -76,5 +76,3 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 RAW_ENABLE = yes
 DYNAMIC_KEYMAP_ENABLE = yes
 CIE1931_CURVE = yes
-
-LAYOUTS = 60_hhkb

keyboards/satan/info.json

@@ -20,11 +20,8 @@
     "LAYOUT_60_iso_split_bs_rshift": {
       "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0}, {"label":"k05", "x":5, "y":0}, {"label":"k06", "x":6, "y":0}, {"label":"k07", "x":7, "y":0}, {"label":"k08", "x":8, "y":0}, {"label":"k09", "x":9, "y":0}, {"label":"k0a", "x":10, "y":0}, {"label":"k0b", "x":11, "y":0}, {"label":"k0c", "x":12, "y":0}, {"label":"k0d", "x":13, "y":0}, {"label":"k49", "x":14, "y":0}, {"label":"k10", "x":0, "y":1, "w":1.5}, {"label":"k11", "x":1.5, "y":1}, {"label":"k12", "x":2.5, "y":1}, {"label":"k13", "x":3.5, "y":1}, {"label":"k14", "x":4.5, "y":1}, {"label":"k15", "x":5.5, "y":1}, {"label":"k16", "x":6.5, "y":1}, {"label":"k17", "x":7.5, "y":1}, {"label":"k18", "x":8.5, "y":1}, {"label":"k19", "x":9.5, "y":1}, {"label":"k1a", "x":10.5, "y":1}, {"label":"k1b", "x":11.5, "y":1}, {"label":"k1c", "x":12.5, "y":1}, {"label":"k20", "x":0, "y":2, "w":1.75}, {"label":"k21", "x":1.75, "y":2}, {"label":"k22", "x":2.75, "y":2}, {"label":"k23", "x":3.75, "y":2}, {"label":"k24", "x":4.75, "y":2}, {"label":"k25", "x":5.75, "y":2}, {"label":"k26", "x":6.75, "y":2}, {"label":"k27", "x":7.75, "y":2}, {"label":"k28", "x":8.75, "y":2}, {"label":"k29", "x":9.75, "y":2}, {"label":"k2a", "x":10.75, "y":2}, {"label":"k2b", "x":11.75, "y":2}, {"label":"k2c", "x":12.75, "y":2}, {"label":"k2d", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"k30", "x":0, "y":3, "w":1.25}, {"label":"k31", "x":1.25, "y":3}, {"label":"k32", "x":2.25, "y":3}, {"label":"k33", "x":3.25, "y":3}, {"label":"k34", "x":4.25, "y":3}, {"label":"k35", "x":5.25, "y":3}, {"label":"k36", "x":6.25, "y":3}, {"label":"k37", "x":7.25, "y":3}, {"label":"k38", "x":8.25, "y":3}, {"label":"k39", "x":9.25, "y":3}, {"label":"k3a", "x":10.25, "y":3}, {"label":"k3b", "x":11.25, "y":3}, {"label":"k3d", "x":12.25, "y":3, "w":1.75}, {"label":"k3c", "x":14, "y":3}, {"label":"k40", "x":0, "y":4, "w":1.5}, {"label":"k41", "x":1.5, "y":4}, {"label":"k42", "x":2.5, "y":4, "w":1.5}, {"label":"k45", "x":4, "y":4, "w":6}, {"label":"k4a", "x":10, "y":4, "w":1.5}, {"label":"k4b", "x":11.5, "y":4}, {"label":"k4c", "x":12.5, "y":4}, {"label":"k4d", "x":13.5, "y":4, "w":1.5}]
     },
-    "LAYOUT_60_ansi_split_rshift": {
-      "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0}, {"label":"k05", "x":5, "y":0}, {"label":"k06", "x":6, "y":0}, {"label":"k07", "x":7, "y":0}, {"label":"k08", "x":8, "y":0}, {"label":"k09", "x":9, "y":0}, {"label":"k0a", "x":10, "y":0}, {"label":"k0b", "x":11, "y":0}, {"label":"k0c", "x":12, "y":0}, {"label":"k0d", "x":13, "y":0, "w":2}, {"label":"k10", "x":0, "y":1, "w":1.5}, {"label":"k11", "x":1.5, "y":1}, {"label":"k12", "x":2.5, "y":1}, {"label":"k13", "x":3.5, "y":1}, {"label":"k14", "x":4.5, "y":1}, {"label":"k15", "x":5.5, "y":1}, {"label":"k16", "x":6.5, "y":1}, {"label":"k17", "x":7.5, "y":1}, {"label":"k18", "x":8.5, "y":1}, {"label":"k19", "x":9.5, "y":1}, {"label":"k1a", "x":10.5, "y":1}, {"label":"k1b", "x":11.5, "y":1}, {"label":"k1c", "x":12.5, "y":1}, {"label":"k1d", "x":13.5, "y":1, "w":1.5}, {"label":"k20", "x":0, "y":2, "w":1.75}, {"label":"k21", "x":1.75, "y":2}, {"label":"k22", "x":2.75, "y":2}, {"label":"k23", "x":3.75, "y":2}, {"label":"k24", "x":4.75, "y":2}, {"label":"k25", "x":5.75, "y":2}, {"label":"k26", "x":6.75, "y":2}, {"label":"k27", "x":7.75, "y":2}, {"label":"k28", "x":8.75, "y":2}, {"label":"k29", "x":9.75, "y":2}, {"label":"k2a", "x":10.75, "y":2}, {"label":"k2b", "x":11.75, "y":2}, {"label":"k2d", "x":12.75, "y":2, "w":2.25}, {"label":"k30", "x":0, "y":3, "w":2.25}, {"label":"k32", "x":2.25, "y":3}, {"label":"k33", "x":3.25, "y":3}, {"label":"k34", "x":4.25, "y":3}, {"label":"k35", "x":5.25, "y":3}, {"label":"k36", "x":6.25, "y":3}, {"label":"k37", "x":7.25, "y":3}, {"label":"k38", "x":8.25, "y":3}, {"label":"k39", "x":9.25, "y":3}, {"label":"k3a", "x":10.25, "y":3}, {"label":"k3b", "x":11.25, "y":3}, {"label":"k3d", "x":12.25, "y":3, "w":1.75}, {"label":"k3c", "x":14, "y":3}, {"label":"k40", "x":0, "y":4, "w":1.25}, {"label":"k41", "x":1.25, "y":4, "w":1.25}, {"label":"k42", "x":2.5, "y":4, "w":1.25}, {"label":"k45", "x":3.75, "y":4, "w":6.25}, {"label":"k4a", "x":10, "y":4, "w":1.25}, {"label":"k4b", "x":11.25, "y":4, "w":1.25}, {"label":"k4c", "x":12.5, "y":4, "w":1.25}, {"label":"k4d", "x":13.75, "y":4, "w":1.25}]
-    },
     "LAYOUT_60_iso_split_rshift": {
       "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0}, {"label":"k05", "x":5, "y":0}, {"label":"k06", "x":6, "y":0}, {"label":"k07", "x":7, "y":0}, {"label":"k08", "x":8, "y":0}, {"label":"k09", "x":9, "y":0}, {"label":"k0a", "x":10, "y":0}, {"label":"k0b", "x":11, "y":0}, {"label":"k0c", "x":12, "y":0}, {"label":"k0d", "x":13, "y":0, "w":2}, {"label":"k10", "x":0, "y":1, "w":1.5}, {"label":"k11", "x":1.5, "y":1}, {"label":"k12", "x":2.5, "y":1}, {"label":"k13", "x":3.5, "y":1}, {"label":"k14", "x":4.5, "y":1}, {"label":"k15", "x":5.5, "y":1}, {"label":"k16", "x":6.5, "y":1}, {"label":"k17", "x":7.5, "y":1}, {"label":"k18", "x":8.5, "y":1}, {"label":"k19", "x":9.5, "y":1}, {"label":"k1a", "x":10.5, "y":1}, {"label":"k1b", "x":11.5, "y":1}, {"label":"k1c", "x":12.5, "y":1}, {"label":"k20", "x":0, "y":2, "w":1.75}, {"label":"k21", "x":1.75, "y":2}, {"label":"k22", "x":2.75, "y":2}, {"label":"k23", "x":3.75, "y":2}, {"label":"k24", "x":4.75, "y":2}, {"label":"k25", "x":5.75, "y":2}, {"label":"k26", "x":6.75, "y":2}, {"label":"k27", "x":7.75, "y":2}, {"label":"k28", "x":8.75, "y":2}, {"label":"k29", "x":9.75, "y":2}, {"label":"k2a", "x":10.75, "y":2}, {"label":"k2b", "x":11.75, "y":2}, {"label":"k2c", "x":12.75, "y":2}, {"label":"k2d", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"k30", "x":0, "y":3, "w":1.25}, {"label":"k31", "x":1.25, "y":3}, {"label":"k32", "x":2.25, "y":3}, {"label":"k33", "x":3.25, "y":3}, {"label":"k34", "x":4.25, "y":3}, {"label":"k35", "x":5.25, "y":3}, {"label":"k36", "x":6.25, "y":3}, {"label":"k37", "x":7.25, "y":3}, {"label":"k38", "x":8.25, "y":3}, {"label":"k39", "x":9.25, "y":3}, {"label":"k3a", "x":10.25, "y":3}, {"label":"k3b", "x":11.25, "y":3}, {"label":"k3d", "x":12.25, "y":3, "w":1.75}, {"label":"k3c", "x":14, "y":3}, {"label":"k40", "x":0, "y":4, "w":1.25}, {"label":"k41", "x":1.25, "y":4, "w":1.25}, {"label":"k42", "x":2.5, "y":4, "w":1.25}, {"label":"k45", "x":3.75, "y":4, "w":6.25}, {"label":"k4a", "x":10, "y":4, "w":1.25}, {"label":"k4b", "x":11.25, "y":4, "w":1.25}, {"label":"k4c", "x":12.5, "y":4, "w":1.25}, {"label":"k4d", "x":13.75, "y":4, "w":1.25}]
     }
   }
-}
+}

keyboards/subatomic/config.h

@@ -24,22 +24,24 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6063
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    OLKB
-#define PRODUCT         Subatomic
+#define MANUFACTURER    Ortholinear Keyboards
+#define PRODUCT         The Subatomic Keyboard
 #define DESCRIPTION     A compact ortholinear keyboard
 
 /* key matrix size */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 8
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
 
 /* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2, A3, A6 }
-#define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0, B9, B8 }
+#define MATRIX_ROW_PINS { D2, D5, B5, B6, D3 }
+#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, C6, C5 }
 #define UNUSED_PINS
 
 // #define AUDIO_VOICES
 // #define C6_AUDIO
 
+#define BACKLIGHT_PIN B7
+
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 

keyboards/subatomic/keymaps/default/config.h

@@ -0,0 +1,29 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+#endif

keyboards/subatomic/keymaps/default/keymap.c

@@ -44,13 +44,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Pg Dn| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  | Right|   \  |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_QWERTY] = LAYOUT_ortho_5x14(
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
-  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
-  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
-),
+[_QWERTY] = {
+  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
+  {KC_TRNS, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,  KC_TRNS},
+  {KC_TRNS, KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_TRNS},
+  {KC_TRNS, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  KC_TRNS},
+  {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS}
+},
 
 /* Colemak
  * ,-------------------------------------------------------------------------------------------------.
@@ -65,13 +65,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Pg Dn| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  | Right|   \  |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_COLEMAK] = LAYOUT_ortho_5x14(
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
-  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL,
-  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
-  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
-),
+[_COLEMAK] = {
+  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
+  {KC_TRNS, KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL,  KC_TRNS},
+  {KC_TRNS, KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, KC_TRNS},
+  {KC_TRNS, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  KC_TRNS},
+  {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS}
+},
 
 /* Dvorak
  * ,-------------------------------------------------------------------------------------------------.
@@ -86,13 +86,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Pg Dn| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  | Right|   \  |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_DVORAK] = LAYOUT_ortho_5x14(
-  KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS,
-  KC_TRNS, KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL,  KC_TRNS,
-  KC_TRNS, KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, KC_TRNS,
-  KC_TRNS, KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT,  KC_TRNS,
-  KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS
-),
+[_DVORAK] = {
+  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
+  {KC_TRNS, KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL,  KC_TRNS},
+  {KC_TRNS, KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, KC_TRNS},
+  {KC_TRNS, KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT,  KC_TRNS},
+  {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS}
+},
 
 /* Lower
  * ,-------------------------------------------------------------------------------------------------.
@@ -107,13 +107,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |      |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_LOWER] = LAYOUT_ortho_5x14(
-   KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
-   KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
-   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
-   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______,
-   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
-  ),
+[_LOWER] = {
+  {KC_TRNS, KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, KC_TRNS},
+  {KC_TRNS, KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  KC_TRNS},
+  {KC_TRNS, KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS},
+  {KC_TRNS, _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______,KC_TRNS},
+  {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_TRNS}
+},
 
 /* Raise
  * ,-------------------------------------------------------------------------------------------------.
@@ -128,13 +128,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |             |      | Next | Vol- | Vol+ |      | Play |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_RAISE] = LAYOUT_ortho_5x14(
-   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
-   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
-   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______,
-   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
-),
+[_RAISE] = {
+  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
+  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  KC_TRNS},
+  {KC_TRNS, KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, KC_TRNS},
+  {KC_TRNS, _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, KC_TRNS},
+  {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_TRNS}
+},
 
 /* Adjust (Lower + Raise)
  * ,-------------------------------------------------------------------------------------------------.
@@ -149,13 +149,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |             |      |      |      |      |      |      |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_ADJUST] = LAYOUT_ortho_5x14(
-   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
-   _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
-   _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______,
-   _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______,
-   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-)
+[_ADJUST] = {
+  {KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS},
+  {KC_TRNS, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,  KC_TRNS},
+  {KC_TRNS, _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, KC_TRNS},
+  {KC_TRNS, _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______, KC_TRNS},
+  {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_TRNS}
+}
 
 
 };

keyboards/subatomic/rules.mk

@@ -1,22 +1,69 @@
-# project specific files
-#SRC = matrix.c
 
-# Cortex version
-MCU  = STM32F303
+
+# MCU name
+MCU = at90usb1286
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=8192
 
 # Build Options
-#   comment out to disable the options.
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
 #
-BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes  # Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes     # USB Nkey Rollover
-#CUSTOM_MATRIX = yes # Custom matrix file
-AUDIO_ENABLE = yes
-RGBLIGHT_ENABLE = no
-# SERIAL_LINK_ENABLE = yes
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = yes            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/subatomic/subatomic.h

@@ -3,25 +3,4 @@
 
 #include "quantum.h"
 
-
-#define LAYOUT_ortho_5x14( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
-    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
-    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \
-) \
-{ \
-    { k00, k01, k02, k03, k04, k05, KC_NO, KC_NO }, \
-    { k10, k11, k12, k13, k14, k15, KC_NO, KC_NO }, \
-    { k20, k21, k22, k23, k24, k25, KC_NO, KC_NO }, \
-    { k30, k31, k32, k33, k34, k35, KC_NO, KC_NO }, \
-    { k06, k07, k08, k09, k0a, k0b, k0c,   k0d }, \
-    { k16, k17, k18, k19, k1a, k1b, k1c,   k1d }, \
-    { k26, k27, k28, k29, k2a, k2b, k2c,   k2d }, \
-    { k36, k37, k38, k39, k3a, k3b, k3c,   k3d }, \
-    { k40, k41, k42, k49, k4a, k4b, k4c,   k4d }, \
-    { k46, k47, k48, k43, k44, k45, KC_NO, KC_NO }, \
-}
-
-#endif
+#endif

keyboards/tv44/keymaps/talljoe-minivan/config.h

@@ -11,7 +11,7 @@
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
     K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
     K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
-) LAYOUT_arrow( \
+) KEYMAP_ARROW( \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
     K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K0D, \
@@ -24,7 +24,7 @@
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
     K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
     K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
-) LAYOUT_arrow( \
+) KEYMAP_ARROW( \
     K00, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2C, \
     K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
@@ -37,14 +37,14 @@
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
     K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
     K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
-) LAYOUT_arrow( \
+) KEYMAP_ARROW( \
     K00, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K2D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2C, \
     K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
-    K40, K41, K42,      K44, K45,      K48, K0B, K0C, K4C       \
+    K40, K49, K42,      K44, K45,      K48, K0B, K0C, K4C       \
 )
 
-#define TEMPLATE_RESET LAYOUT_arrow( \
+#define TEMPLATE_RESET KEYMAP_ARROW( \
     RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET, \
     KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
     KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \

keyboards/whitefox/keymaps/konstantin/config.h

@@ -5,18 +5,15 @@
 #undef  IS_COMMAND
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RCTL)))
 
-#define MAGIC_KEY_LAYER0_ALT1 BSLS
-#define MAGIC_KEY_BOOTLOADER  ESC
+#define MAGIC_KEY_LAYER0_ALT1  BSLS
+#define MAGIC_KEY_BOOTLOADER   ESC
 
-#define MOUSEKEY_DELAY             50
-#define MOUSEKEY_INTERVAL          15
-#define MOUSEKEY_MAX_SPEED         4
-#define MOUSEKEY_TIME_TO_MAX       50
-#define MOUSEKEY_WHEEL_MAX_SPEED   1
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 50
-
-#define NO_ACTION_FUNCTION
-#define NO_ACTION_MACRO
+#define MOUSEKEY_DELAY              50
+#define MOUSEKEY_INTERVAL           15
+#define MOUSEKEY_MAX_SPEED          4
+#define MOUSEKEY_TIME_TO_MAX        50
+#define MOUSEKEY_WHEEL_MAX_SPEED    1
+#define MOUSEKEY_WHEEL_TIME_TO_MAX  50
 
 #define PERMISSIVE_HOLD
 #define TAPPING_TERM    200

keyboards/whitefox/keymaps/konstantin/keymap.c

@@ -151,11 +151,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
    */
   [L_BASE] = LAYOUT_truefox( \
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,  KC_PSCR, \
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL,  \
-    FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_PGUP, \
-    KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RCT_RSF,          KC_UP,   KC_PGDN, \
-    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    RAL_RGU, FN_FNLK,                   KC_LEFT, KC_DOWN, KC_RGHT  \
+    KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSLS,KC_GRV, KC_PSCR, \
+    KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC,        KC_DEL,  \
+    FN_CAPS,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,        KC_ENT,         KC_PGUP, \
+    KC_LSFT,        KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,RCT_RSF,        KC_UP,  KC_PGDN, \
+    KC_LCTL,KC_LGUI,KC_LALT,                        KC_SPC,                 RAL_RGU,FN_FNLK,                KC_LEFT,KC_DOWN,KC_RGHT  \
   ),
 
   /* Function layer
@@ -172,11 +172,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
    */
   [L_FN] = LAYOUT_truefox( \
-    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  NUMPAD,  KC_SLCK, KC_PAUS, \
-    KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, CLEAR,            KC_INS,  \
-    _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______,          _______,          TOP,     \
-    _______,          KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_APP,           KC_PGUP, BOTTOM,  \
-    _______, DESKTOP, DSKTP_L,                            KC_WH_D,                   DSKTP_R, _______,                   KC_HOME, KC_PGDN, KC_END   \
+    _______,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, NUMPAD, KC_SLCK,KC_PAUS, \
+    KC_BTN4,KC_BTN2,KC_MS_U,KC_BTN1,KC_BTN3,KC_BTN5,_______,_______,_______,KC_MSTP,KC_MPLY,KC_MPRV,KC_MNXT,CLEAR,          KC_INS,  \
+    _______,KC_MS_L,KC_MS_D,KC_MS_R,KC_WH_U,_______,_______,_______,_______,_______,_______,_______,        _______,        TOP,     \
+    _______,        KC_ACL0,KC_ACL2,KC_WH_L,KC_WH_R,_______,_______,_______,KC_VOLD,KC_VOLU,KC_MUTE,KC_APP,         KC_PGUP,BOTTOM,  \
+    _______,DESKTOP,DSKTP_L,                        KC_WH_D,                DSKTP_R,_______,                KC_HOME,KC_PGDN,KC_END   \
   ),
 
   /* Numpad layer
@@ -193,10 +193,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
    */
   [L_NUMPAD] = LAYOUT_truefox( \
-    NUMPAD,  _______, _______, _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   KC_PMNS, MINUS,   EQUALS,  NUMPAD,  _______, _______, \
-    _______, _______, _______, _______, _______, _______, _______, KC_P4,   KC_P5,   KC_P6,   KC_PPLS, L_PAREN, R_PAREN, _______,          _______, \
-    _______, _______, _______, _______, _______, _______, _______, KC_P1,   KC_P2,   KC_P3,   KC_PAST, TIMES,            KC_PENT,          _______, \
-    _______,          _______, _______, _______, _______, _______, KC_P0,   KC_P0,   COMMA,   KC_PDOT, KC_PSLS, DIVIDE,           _______, _______, \
-    _______, _______, _______,                            _______,                   _______, _______,                   _______, _______, _______  \
+    NUMPAD, _______,_______,_______,_______,_______,_______,KC_P7,  KC_P8,  KC_P9,  KC_PMNS,MINUS,  EQUALS, NUMPAD, _______,_______, \
+    _______,_______,_______,_______,_______,_______,_______,KC_P4,  KC_P5,  KC_P6,  KC_PPLS,L_PAREN,R_PAREN,_______,        _______, \
+    _______,_______,_______,_______,_______,_______,_______,KC_P1,  KC_P2,  KC_P3,  KC_PAST,TIMES,          KC_PENT,        _______, \
+    _______,        _______,_______,_______,_______,_______,KC_P0,  KC_P0,  COMMA,  KC_PDOT,KC_PSLS,DIVIDE,         _______,_______, \
+    _______,_______,_______,                        _______,                _______,_______,                _______,_______,_______  \
   ),
 };

keyboards/whitefox/keymaps/konstantin/rules.mk

@@ -1,13 +1,15 @@
+AUDIO_ENABLE      = no
 BACKLIGHT_ENABLE  = no
+BLUETOOTH_ENABLE  = no
 BOOTMAGIC_ENABLE  = no
 COMMAND_ENABLE    = yes
 CONSOLE_ENABLE    = yes
 EXTRAKEY_ENABLE   = yes
+MIDI_ENABLE       = no
 MOUSEKEY_ENABLE   = yes
 NKRO_ENABLE       = yes
+RGBLIGHT_ENABLE   = no
 SLEEP_LED_ENABLE  = no
 TAP_DANCE_ENABLE  = yes
 UNICODE_ENABLE    = yes
 VISUALIZER_ENABLE = no
-
-EXTRAFLAGS += -flto

keyboards/xd75/keymaps/boy_314/keymap.c

@@ -3,9 +3,9 @@
 // Layer shorthand
 #define _DV 0
 #define _QW 1
-#define _NP 2
-#define _FN1 3
-#define _FN2 4
+#define _FN1 2
+#define _FN2 3
+#define _NP 4
 
 #define RGBLIGHT_LIGHT_VAL 255
 const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {10, 10, 10};
@@ -23,7 +23,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
  * | LSHIFT | ;      | Q      | J      | K      | X      | END    | UP     | PG DN  | M      | W      | W      | V      | Z      | RSHIFT |
  * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
- * | LCTRL  | DEL    | LALT   | WIN    | FN1    | SPACE  | LEFT   | DOWN   | RIGHT  | SPACE  | FN2    | LEFT   | DOWN   | UP     | RIGHT  |
+ * | LCTRL  | DEL    | LALT   | WIN    | FN1    | SPACE  | LEFT   | DOWN   | RIGHT  | SPACE  | FN2    | [      | ]      | {      | }      |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
 
@@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   { KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_LBRC, KC_BSLS, KC_RBRC, KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH  },
   { KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_HOME, KC_DEL,  KC_PGUP, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_ENT   },
   { KC_LSPO, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_END,  KC_UP,   KC_PGDN, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSPC  },
-  { KC_LCTL, KC_DEL,  KC_LALT, KC_LGUI, MO(_FN1),KC_SPC,  KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC,  MO(_FN2),KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT },
+  { KC_LCTL, KC_DEL,  KC_LALT, KC_LGUI, MO(_FN1),KC_SPC,  KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC,  MO(_FN2),KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR  },
  },
 
 /* QWERTY
@@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
  * | LSHIFT | Z      | X      | C      | V      | B      | END    | UP     | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
  * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
- * | LCTRL  | DEL    | LALT   | WIN    | FN1    | SPACE  | LEFT   | DOWN   | RIGHT  | SPACE  | FN2    | LEFT   | DOWN   | UP     | RIGHT  |
+ * | LCTRL  | DEL    | LALT   | WIN    | FN1    | SPACE  | LEFT   | DOWN   | RIGHT  | SPACE  | FN2    | [      | ]      | {      | }      |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
  
@@ -54,31 +54,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   { KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC, KC_BSLS, KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_ENT   },
   { KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME, KC_DEL,  KC_PGUP, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT  },
   { KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_UP,   KC_PGDN, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC  },
-  { KC_LCTL, KC_DEL,  KC_LALT, KC_LGUI, MO(_FN1),KC_SPC,  KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC,  MO(_FN2),KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT },
+  { KC_LCTL, KC_DEL,  KC_LALT, KC_LGUI, MO(_FN1),KC_SPC,  KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC,  MO(_FN2),KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR  },
  },
  
-/* NUMPAD
- * .--------------------------------------------------------------------------------------------------------------------------------------.
- * |        |        |        |        |        |        | /      | *      | -      |        |        |        |        |        |        |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        |        |        |        |        |        | 7      | 8      | 9      |        |        |        |        |        |        |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        |        |        |        |        |        | 4      | 5      | 6      |        |        |        |        |        |        |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        |        |        |        |        |        | 1      | 2      | 3      |        |        |        |        |        |        |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        |        |        |        |        |        | +      | 0      | .      |        |        |        |        |        |        |
- * '--------------------------------------------------------------------------------------------------------------------------------------'
- */  
-
-  [_NP] = { /* NUMPAD */
-  { _______, _______, _______, _______, _______, _______, KC_SLSH, KC_ASTR, KC_MINS, _______, _______, _______, _______, _______, _______  },
-  { _______, _______, _______, _______, _______, _______,    KC_7,    KC_8,    KC_9, _______, _______, _______, _______, _______, _______  },
-  { _______, _______, _______, _______, _______, _______,    KC_4,    KC_5,    KC_6, _______, _______, _______, _______, _______, _______  },
-  { _______, _______, _______, _______, _______, _______,    KC_1,    KC_2,    KC_3, _______, _______, _______, _______, _______, _______  },
-  { _______, _______, _______, _______, _______, _______, KC_PLUS,    KC_0,  KC_DOT, _______, _______, _______, _______, _______, _______  },
- },
-
 /* FUNCTION1
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * |   `    |   !    |   @    |   #    |   $    |   %    |        |        |        |    ^   |   &    |   *    |   (    |   )    | BACKSP |
@@ -106,7 +84,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * |   `    | 1      | 2      | 3      | 4      | 5      |        |        |        | 6      | 7      | 8      | 9      | 0      | BACKSP |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |   `    |        |        |   UP   |        |        | RESET  |RGB HUE-|RGB HUE+| NUMPAD |        |        |        |        |        |
+ * |   `    |        |        |   UP   |        |        | RESET  |RGB HUE-|RGB HUE+|        |        |        |        |        |        |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
  * | DEL    |        |  LEFT  |  DOWN  | RIGHT  |        |        |RGB SAT-|RGB SAT+| DVORAK |   -    |   =    |   [    |   ]    |   \    |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
@@ -118,10 +96,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  
  [_FN2] = { /* FUNCTION2 */
   {  KC_GRV,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5, _______, _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC  },
-  {  KC_GRV, _______, _______,   KC_UP, _______, _______,   RESET, RGB_HUD, RGB_HUI, TG(_NP), _______, _______, _______, _______, KC_DEL   },
-  {  KC_DEL, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, RGB_SAD, RGB_SAI, TG(_DV), KC_MINS,  KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS  },
-  { _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, TG(_QW), _______, _______, KC_PGDN, KC_PGUP, _______  },
+  {  KC_GRV, _______, _______,   KC_UP, _______, _______,   RESET, RGB_HUD, RGB_HUI, _______, _______, _______, _______, _______, KC_DEL   },
+  {  KC_DEL, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, RGB_SAD, RGB_SAI, TO(_DV), KC_MINS,  KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS  },
+  { _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, TO(_QW), _______, _______, KC_PGDN, KC_PGUP, _______  },
   { _______, _______, _______, _______, _______, _______, _______,RGB_RMOD, RGB_MOD, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  },
+ },
+ 
+/* NUMPAD
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        |        |        |        |        | /      | *      | -      |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        | 7      | 8      | 9      |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        | 4      | 5      | 6      |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        | 1      | 2      | 3      |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        | 0      | 0      | .      |        |        |        |        |        |        |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */  
+
+  [_NP] = { /* NUMPAD */
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
  }
 };
 
@@ -149,13 +149,6 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
     return MACRO_NONE;
 };
 
-void matrix_init_user(void) {
-  if (!(host_keyboard_leds() & (1<<USB_LED_NUM_LOCK))) {
-    register_code(KC_NUMLOCK);
-    unregister_code(KC_NUMLOCK);
-  }
-}
-
 void led_set_user(uint8_t usb_led) {
     if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
         rgblight_mode(18);