add sample and wavetable examples, parsers for both

* Enable RGBLIGHT_ANIMATIONS by default on the Zen rev2

* Also fixing OLED as it is upside down

Makefile

@@ -534,6 +534,8 @@ endef
 %:
 	# Check if we have the CMP tool installed
 	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
+	# Ensure that python3 is installed. This check can be removed after python is used in more places.
+	if ! python3 --version 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
 	# Check if the submodules are dirty, and display a warning if they are
 ifndef SKIP_GIT
 	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 1 --init lib/chibios; fi

keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.c

@@ -0,0 +1,56 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+// Value to place in RTC backup register 10 for persistent bootloader mode
+#define RTC_BOOTLOADER_FLAG 0x424C
+
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  stm32_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+   //JTAG-DP Disabled and SW-DP Enabled
+   AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE;
+   //Set backup register DR10 to enter bootloader on reset
+   BKP->DR10 = RTC_BOOTLOADER_FLAG;
+}

keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.h

@@ -0,0 +1,166 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for a Generic STM32F103 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F103
+#define BOARD_NAME              "Generic STM32F103x board"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK            32768
+#define STM32_HSECLK            8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F103xB
+
+/*
+ * IO pins assignments
+ */
+
+/* on-board */
+
+#define GPIOA_LED               8
+#define GPIOD_OSC_IN            0
+#define GPIOD_OSC_OUT           1
+
+/* In case your board has a "USB enable" hardware
+   controlled by a pin, define it here. (It could be just
+   a 1.5k resistor connected to D+ line.)
+*/
+/*
+#define GPIOB_USB_DISC          10
+*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ *   0 - Analog input.
+ *   1 - Push Pull output 10MHz.
+ *   2 - Push Pull output 2MHz.
+ *   3 - Push Pull output 50MHz.
+ *   4 - Digital input.
+ *   5 - Open Drain output 10MHz.
+ *   6 - Open Drain output 2MHz.
+ *   7 - Open Drain output 50MHz.
+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ *   9 - Alternate Push Pull output 10MHz.
+ *   A - Alternate Push Pull output 2MHz.
+ *   B - Alternate Push Pull output 50MHz.
+ *   C - Reserved.
+ *   D - Alternate Open Drain output 10MHz.
+ *   E - Alternate Open Drain output 2MHz.
+ *   F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA2  - Alternate output  (USART2 TX).
+ * PA3  - Normal input      (USART2 RX).
+ * PA9  - Alternate output  (USART1 TX).
+ * PA10 - Normal input      (USART1 RX).
+ */
+#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
+#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
+#define VAL_GPIOAODR            0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB10    - Push Pull output  (USB switch).
+ */
+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
+#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
+#define VAL_GPIOBODR            0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC13    - Push Pull output  (LED).
+ */
+#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
+#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
+#define VAL_GPIOCODR            0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0  - Normal input (XTAL).
+ * PD1  - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
+#define VAL_GPIODODR            0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
+#define VAL_GPIOEODR            0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+/* The point is that most of the generic STM32F103* boards
+   have a 1.5k resistor connected on one end to the D+ line
+   and on the other end to some pin. Or even a slightly more
+   complicated "USB enable" circuit, controlled by a pin.
+   That should go here.
+
+   However on some boards (e.g. one that I have), there's no
+   such hardware. In which case it's better to not do anything.
+*/
+/*
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+/*
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */

keyboards/cannonkeys/practice65/boards/GENERIC_STM32_F103/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103

keyboards/cannonkeys/practice65/bootloader_defs.h

@@ -0,0 +1,10 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+
+// STM32F103* does NOT have an USB bootloader in ROM (only serial),
+//  so setting anything here does not make much sense
+#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/cannonkeys/practice65/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/cannonkeys/practice65/config.h

@@ -0,0 +1,78 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCA04
+#define PRODUCT_ID      0x6565
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER CannonKeys
+#define PRODUCT Practice 65
+#define DESCRIPTION Practice 65
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+#define MATRIX_COL_PINS { B8, B0, A0, B5, B10, B9, A6, B12, A7, A5, A4, A3, A2, A1, B13, B14 }
+#define MATRIX_ROW_PINS { B4, B11, B1, B7, B6 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_LED_N 20
+#define RGBLED_NUM WS2812_LED_N
+#define PORT_WS2812     GPIOB
+#define PIN_WS2812      15
+#define WS2812_SPI SPID2
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/cannonkeys/practice65/halconf.h

@@ -0,0 +1,353 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/cannonkeys/practice65/keymaps/default/keymap.c

@@ -0,0 +1,48 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_default(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,   KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC, KC_DEL, KC_INS,\
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS, KC_DEL,\
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,         KC_PGUP,  \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH,           KC_RSFT, KC_UP, KC_PGDN, \
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                   KC_RALT, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT \
+  ),
+
+  [_FN1] = LAYOUT_default(
+    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, _______, _______,\
+    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
+    BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, \
+    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, \
+    KC_GRV,  _______, _______,                            _______,                            _______, _______, _______, _______, _______, RESET \
+  )
+};

keyboards/cannonkeys/practice65/ld/MKL26Z64.ld

@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
+ *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * KL26Z64 memory setup.
+ */
+MEMORY
+{
+  flash0   : org = 0x00000000, len = 0x100
+  flash1   : org = 0x00000400, len = 0x10
+  flash2   : org = 0x00000410, len = 62k - 0x410
+  flash3   : org = 0x0000F800, len = 2k
+  flash4   : org = 0x00000000, len = 0
+  flash5   : org = 0x00000000, len = 0
+  flash6   : org = 0x00000000, len = 0
+  flash7   : org = 0x00000000, len = 0
+  ram0     : org = 0x1FFFF800, len = 8k
+  ram1     : org = 0x00000000, len = 0
+  ram2     : org = 0x00000000, len = 0
+  ram3     : org = 0x00000000, len = 0
+  ram4     : org = 0x00000000, len = 0
+  ram5     : org = 0x00000000, len = 0
+  ram6     : org = 0x00000000, len = 0
+  ram7     : org = 0x00000000, len = 0
+}
+
+/* Flash region for the configuration bytes.*/
+SECTIONS
+{
+  .cfmprotect : ALIGN(4) SUBALIGN(4)
+  {
+    KEEP(*(.cfmconfig))
+  } > flash1
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash2);
+REGION_ALIAS("XTORS_FLASH_LMA", flash2);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash2);
+REGION_ALIAS("TEXT_FLASH_LMA", flash2);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash2);
+REGION_ALIAS("RODATA_FLASH_LMA", flash2);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash2);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash2);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+__eeprom_workarea_start__ = ORIGIN(flash3);
+__eeprom_workarea_size__  = LENGTH(flash3);
+__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld

keyboards/cannonkeys/practice65/ld/STM32F103x8_stm32duino_bootloader.ld

@@ -0,0 +1,88 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * ST32F103xB memory setup for use with the maplemini bootloader.
+ * You will have to
+ * 	#define CORTEX_VTOR_INIT 0x5000
+ * in your projects chconf.h
+ */
+MEMORY
+{
+    flash0  : org = 0x08002000, len = 64k - 0x2000
+    flash1  : org = 0x00000000, len = 0
+    flash2  : org = 0x00000000, len = 0
+    flash3  : org = 0x00000000, len = 0
+    flash4  : org = 0x00000000, len = 0
+    flash5  : org = 0x00000000, len = 0
+    flash6  : org = 0x00000000, len = 0
+    flash7  : org = 0x00000000, len = 0
+    ram0    : org = 0x20000000, len = 20k
+    ram1    : org = 0x00000000, len = 0
+    ram2    : org = 0x00000000, len = 0
+    ram3    : org = 0x00000000, len = 0
+    ram4    : org = 0x00000000, len = 0
+    ram5    : org = 0x00000000, len = 0
+    ram6    : org = 0x00000000, len = 0
+    ram7    : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld

keyboards/cannonkeys/practice65/mcuconf.h

@@ -0,0 +1,209 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  TRUE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+#endif /* _MCUCONF_H_ */

keyboards/cannonkeys/practice65/practice65.c

@@ -0,0 +1,2 @@
+
+#include "practice65.h"

keyboards/cannonkeys/practice65/practice65.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include "quantum.h"
+
+#define KNO KC_NO
+
+#define LAYOUT_default( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1F, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D,      K2F, \
+  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,      K3F, \
+  K40, K41,  K42,               K46,           K49, K4A, K4B, K4C, K4D,      K4F \
+) { \
+  {  K00,  K01,  K02,  K03,  K04,    K05,    K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,    K0D,   K0E,    K0F }, \
+  {  K10,  K11,  K12,  K13,  K14,    K15,    K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,    K1D,   KC_NO ,  K1F }, \
+  {  K20,  K21,  K22,  K23,  K24,    K25,    K26,    K27,    K28,    K29,  K2A,  K2B,  KC_NO,  K2D,   KC_NO,  K2F  }, \
+  {  K30,  KNO,  K32,  K33,  K34,    K35,    K36,    K37,    K38,    K39,  K3A,  K3B,  K3C,    K3D,   KC_NO,  K3F  }, \
+  {  K40,  K41,  K42,  KNO,  KC_NO,  KC_NO,  K46,    KC_NO,  KC_NO,  K49,  K4A,  K4B,  K4C,    K4D,   KC_NO,  K4F  }  \
+}

keyboards/cannonkeys/practice65/readme.md

@@ -0,0 +1,12 @@
+# Practice 65
+
+A Blue Pill STM32F103C8T6-based 65% ANSI board.
+
+Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1)  
+Hardware Supported: Blue Pill STM32F103C8T6  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cannonkeys/practice65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/practice65/rules.mk

@@ -0,0 +1,53 @@
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
+
+# GENERIC STM32F103C8T6 board - stm32duino bootloader
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
+MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+BOARD = GENERIC_STM32_F103
+
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes

keyboards/dztech/dz60rgb/keymaps/matthewrobo/config.h

@@ -0,0 +1,60 @@
+#pragma once
+
+#define FORCE_NKRO
+
+#define PERMISSIVE_HOLD
+#define TAPPING_TERM 150
+
+#undef DISABLE_RGB_MATRIX_SPLASH
+#undef DISABLE_RGB_MATRIX_MULTISPLASH
+#undef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+
+// #define DISABLE_RGB_MATRIX_ALPHAS_MODS
+#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#define DISABLE_RGB_MATRIX_BREATHING
+#define DISABLE_RGB_MATRIX_CYCLE_ALL
+#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+// #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#define DISABLE_RGB_MATRIX_DUAL_BEACON
+#define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#define DISABLE_RGB_MATRIX_RAINDROPS
+#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+// #define DISABLE_RGB_MATRIX_SPLASH
+// #define DISABLE_RGB_MATRIX_MULTISPLASH
+// #define DISABLE_RGB_MATRIX_SOLID_SPLASH
+// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+#define QMK_KEYS_PER_SCAN 4
+
+// #define RGB_MATRIX_KEYRELEASES
+
+
+// some speed shit
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#ifndef NO_DEBUG
+#define NO_DEBUG
+#endif // !NO_DEBUG
+#if !defined(NO_PRINT) && !defined(CONSOLE_ENABLE)
+#define NO_PRINT
+#endif // !NO_PRINT
+
+#define NO_ACTION_ONESHOT
+#define TAPPING_FORCE_HOLD
+#define IGNORE_MOD_TAP_INTERRUPT
+
+// #include "config_led.h"
+// #include "dz60rgb.h"

keyboards/dztech/dz60rgb/keymaps/matthewrobo/keymap.c

@@ -0,0 +1,333 @@
+#include QMK_KEYBOARD_H
+
+extern bool g_suspend_state;
+
+enum dz60rgb_layers {
+	_QWERTY,
+	_FNM,
+	_NAV,
+	_RGB,
+	_FNC
+};
+
+enum dz60rgb_keycodes {
+	REBOOT = SAFE_RANGE,
+	MAS_CRM,
+	MAS_PRP,
+	MAS_RED,
+	MAS_GRN,
+	MAS_BLU,
+	MAS_CYN,
+	MAS_MGT,
+	MAS_YEL,
+	MAS_KEY,
+	MAS_WHT,
+};
+#define _V_V_V_ KC_TRNS
+#define LT_CAPS LT(_NAV, KC_CAPS)
+#define LT_DEL  LT(_RGB, KC_DEL)
+extern rgb_config_t rgb_matrix_config;
+extern bool autoshift_enabled;
+#define MT_SLSH RSFT_T(KC_SLSH)
+#define MT_APP  RALT_T(KC_APP)
+#define LM_LALT LM(_FNM, MOD_LALT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[_QWERTY] = LAYOUT(
+		KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+		LT_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,           \
+		KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  MT_SLSH,          KC_UP,   LT_DEL,  \
+		KC_LCTL, KC_LGUI, LM_LALT,       KC_SPC,                                MT_APP,  MO(_FNC),         KC_LEFT, KC_DOWN, KC_RGHT  \
+	),
+	[_FNM] = LAYOUT(
+		_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______, _______, _______, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, \
+		_______, _______, _V_V_V_,                   _______,                   _______, _______,          _______, _______, _______  \
+	),
+	[_NAV] = LAYOUT(
+		KC_NLCK, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_P7,   KC_P8,   KC_P9,   KC_PAST, KC_PMNS, KC_PPLS, KC_DEL,  \
+		_______, KC_PGUP, KC_HOME, KC_UP,   KC_END,  _______, _______, KC_P4,   KC_P5,   KC_P6,   KC_PSLS, KC_PSCR, KC_SLCK, KC_INS,  \
+		_V_V_V_, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_P1,   KC_P2,   KC_P3,   _______, _______, KC_PENT,          \
+		_______, _______, _______, _______, _______, _______, KC_P0,   KC_P0,   KC_P0,   KC_PDOT, _______,          _______, _______, \
+		_______, _______, _______,                   _______,                   _______, _______,          _______, _______, _______  \
+	),
+	[_RGB] = LAYOUT(
+		_______, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, \
+		_______, RGB_MOD,  RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, MAS_MGT, MAS_BLU, MAS_WHT, RGB_RMOD, RGB_MOD, _______, \
+		_______, RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD, _______, MAS_RED, MAS_KEY, MAS_CYN, MAS_PRP, _______, _______,          \
+		_______, RGB_TOG,  _______, _______, _______, _______, _______, MAS_YEL, MAS_GRN, MAS_CRM, _______,          _______, _V_V_V_, \
+		_______, _______,  _______,                   _______,                   _______, _______,          _______, _______, _______  \
+	),
+	[_FNC] = LAYOUT( // fuck it edition
+		RCTL(KC_ESC),  KC_F1,      KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_F6,      KC_F7,      KC_F8,         KC_F9,        KC_F10,        KC_F11,        KC_F12,        KC_ASTG,       \
+		RCTL(KC_TAB),  RCTL(KC_Q), RCTL(KC_W), RCTL(KC_E), RCTL(KC_R), RCTL(KC_T), RCTL(KC_Y), RCTL(KC_U), RCTL(KC_I),    RCTL(KC_O),   RCTL(KC_P),    RCTL(KC_LBRC), RCTL(KC_RBRC), RCTL(KC_BSLS), \
+		RCTL(KC_CAPS), RCTL(KC_A), RCTL(KC_S), RCTL(KC_D), RCTL(KC_F), RCTL(KC_G), RCTL(KC_H), RCTL(KC_J), RCTL(KC_K),    RCTL(KC_L),   RCTL(KC_SCLN), RCTL(KC_QUOT), RCTL(KC_ENT),                 \
+		RCTL(KC_LSFT), RCTL(KC_Z), RCTL(KC_X), RCTL(KC_C), RCTL(KC_V), REBOOT,     RCTL(KC_N), RCTL(KC_M), RCTL(KC_COMM), RCTL(KC_DOT), RCTL(KC_SLSH),                KC_VOLU, RCTL(KC_DEL),        \
+		RCTL(KC_LCTL), RCTL(KC_LGUI), RCTL(KC_LALT),                   RCTL(KC_SPC),                       KC_MUTE,       _V_V_V_,                     RCTL(KC_LEFT), KC_VOLD, RCTL(KC_RGHT)        \
+	),
+	/*
+	[_FNC] = LAYOUT(
+		_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_ASTG, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
+		_______, _______, _______, _______, _______, REBOOT,  _______, _______, _______, _______, RCTL(KC_SLSH),    KC_VOLU, RCTL(KC_DEL), \
+		_______, _______, _______,                   _______,                   KC_MUTE, _______,    RCTL(KC_LEFT), KC_VOLD, RCTL(KC_RGHT)  \
+	),
+	[_LAYER] = LAYOUT(
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, \
+		_______, _______, _______,                   _______,                   _______, _______,          _______, _______, _______  \
+	),
+	 [_LAYER] = LAYOUT(
+		13,      12,      11,       10,      9,       8,       7,       6,       5,       4,       3,       2,       1,       0,      \
+		27,      26,      25,       24,      23,      22,      21,      20,      19,      18,      17,      16,      15,      14,     \
+		40,      39,      38,       37,      36,      35,      34,      33,      32,      31,      30,      29,      28,              \
+		53,      52,      51,       50,      49,      48,      47,      46,      45,      44,      43,               42,      41,     \
+		62,      61,      60,                         59,                        58,      57,               56,      55,      54      \
+	),
+	*/
+};
+
+void rgb_matrix_indicators_user(void)
+{
+	uint8_t this_led = host_keyboard_leds();
+
+	if (!g_suspend_state && rgb_matrix_config.enable) {
+		switch (biton32(layer_state)) {
+		case _NAV:
+			if (this_led & (1 << USB_LED_NUM_LOCK)) {
+				rgb_matrix_set_color(13, 0xFF, 0x00, 0x00);
+				rgb_matrix_set_color(19, 0xFF, 0xFF, 0x00);
+			} else {
+				rgb_matrix_set_color(13, 0x00, 0x00, 0x00);
+				rgb_matrix_set_color(19, 0xFF, 0x00, 0x00);
+			}
+
+			rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); // layer indicator
+			// ESDF
+			rgb_matrix_set_color(24, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(38, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(37, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(36, 0xFF, 0x00, 0x00);
+			// home/end
+			rgb_matrix_set_color(25, 0x00, 0xFF, 0x00);
+			rgb_matrix_set_color(23, 0x00, 0xFF, 0x00);
+			// pgup/dn
+			rgb_matrix_set_color(26, 0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(39, 0x00, 0x00, 0xFF);
+			// numpad
+			rgb_matrix_set_color(6,  0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(5,  0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(4,  0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(20, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(18, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(33, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(32, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(31, 0xFF, 0xFF, 0x00);
+			// zero
+			rgb_matrix_set_color(47, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(46, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(45, 0xFF, 0x00, 0x00);
+			// dot
+			rgb_matrix_set_color(44, 0x00, 0x00, 0xFF);
+			// math shit
+			rgb_matrix_set_color(3,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(2,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(1,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(0,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(17, 0x00, 0x00, 0xFF);
+			// other
+			rgb_matrix_set_color(16, 0xFF, 0xFF, 0xFF);
+			rgb_matrix_set_color(15, 0xFF, 0xFF, 0xFF);
+			rgb_matrix_set_color(14, 0xFF, 0xFF, 0xFF);
+			break;
+
+		case _RGB: {
+			HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val };
+			HSV hui = hsv;
+			HSV hud = hsv;
+			HSV sai = hsv;
+			HSV sad = hsv;
+			HSV vai = hsv;
+			HSV vad = hsv;
+			hui.h = hsv.h + 8;
+			hud.h = hsv.h - 8;
+			sai.s = hsv.s + 16 > 255 ? 255 : hsv.s + 16;
+			sad.s = hsv.s - 16 < 0   ?   0 : hsv.s - 16;
+			vai.v = hsv.v + 16 > 255 ? 255 : hsv.v + 16;
+			vad.v = hsv.v - 16 < 0   ?   0 : hsv.v - 16;
+			RGB rgb = hsv_to_rgb(hsv);
+			RGB rgbHUI = hsv_to_rgb(hui);
+			RGB rgbHUD = hsv_to_rgb(hud);
+			RGB rgbSAI = hsv_to_rgb(sai);
+			RGB rgbSAD = hsv_to_rgb(sad);
+			RGB rgbVAI = hsv_to_rgb(vai);
+			RGB rgbVAD = hsv_to_rgb(vad);
+			rgb_matrix_set_color(41, 0xFF, 0xFF, 0xFF); // layer indicator
+			rgb_matrix_set_color(59, rgb.r, rgb.g, rgb.b); // color indicator
+			rgb_matrix_set_color(26, 0xFF, 0x80, 0x00); //MOD
+			rgb_matrix_set_color(39, 0xFF, 0x80, 0x00); //MOD
+			rgb_matrix_set_color(16, 0xFF, 0x80, 0x00); //RGB_RMOD
+			rgb_matrix_set_color(15, 0xFF, 0x80, 0x00); //MOD
+			rgb_matrix_set_color(52, 0xFF, 0x40, 0x00); //TOG
+			rgb_matrix_set_color(25, 0x80, 0x80, 0x80); //SPI
+			rgb_matrix_set_color(38, 0x80, 0x80, 0x80); //SPD
+			rgb_matrix_set_color(24, rgbHUI.r, rgbHUI.g, rgbHUI.b); //HUI
+			rgb_matrix_set_color(37, rgbHUD.r, rgbHUD.g, rgbHUD.b); //HUD
+			rgb_matrix_set_color(23, rgbSAI.r, rgbSAI.g, rgbSAI.b); //SAI
+			rgb_matrix_set_color(36, rgbSAD.r, rgbSAD.g, rgbSAD.b); //SAD
+			rgb_matrix_set_color(22, rgbVAI.r, rgbVAI.g, rgbVAI.b); //VAI
+			rgb_matrix_set_color(35, rgbVAD.r, rgbVAD.g, rgbVAD.b); //VAD
+			rgb_matrix_set_color(19, 0xF0, 0x00, 0xFF); //MAS_MGT
+			rgb_matrix_set_color(18, 0x00, 0x02, 0xFF); //MAS_BLU
+			rgb_matrix_set_color(33, 0xFF, 0x00, 0x00); //MAS_RED
+			rgb_matrix_set_color(32, 0x00, 0x00, 0x00); //MAS_KEY
+			rgb_matrix_set_color(31, 0x00, 0xFF, 0xF7); //MAS_CYN
+			rgb_matrix_set_color(46, 0xFF, 0xDA, 0x00); //MAS_YEL
+			rgb_matrix_set_color(45, 0x00, 0xFF, 0x01); //MAS_GRN
+			rgb_matrix_set_color(44, 0xFF, 0xA5, 0x18); //MAS_CRM
+			rgb_matrix_set_color(30, 0x81, 0x3C, 0xFF); //MAS_PRP
+			rgb_matrix_set_color(17, 0xFF, 0xFF, 0xFF); //MAS_WHT
+		}
+		break;
+
+		case _FNC:
+			rgb_matrix_set_color(57, 0xFF, 0xFF, 0xFF); // layer indicator
+			rgb_matrix_set_color(48, 0xFF, 0x00, 0x00); // bootloader
+			rgb_matrix_set_color(42, 0x00, 0x80, 0xFF); // vol
+			rgb_matrix_set_color(55, 0x00, 0x80, 0xFF);
+			rgb_matrix_set_color(58, 0xFF, 0x00, 0x00); // mute
+			rgb_matrix_set_color(56, 0xFF, 0x80, 0x00); // ctrl+left/right
+			rgb_matrix_set_color(54, 0xFF, 0x80, 0x00);
+			rgb_matrix_set_color(41, 0xFF, 0x00, 0x40); // ctrl+delete
+			rgb_matrix_set_color(43, 0xFF, 0x00, 0x40); // ctrl+slash
+
+			if (this_led & (1 << !autoshift_enabled)) {
+				rgb_matrix_set_color(0, 0xFF, 0x00, 0x00); // KC_ASTG
+			} else {
+				rgb_matrix_set_color(0, 0xFF, 0xFF, 0x00);
+			}
+
+			break;
+		}
+	}
+
+	if (this_led & (1 << USB_LED_CAPS_LOCK)) {
+		rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF);
+	}
+}
+
+void matrix_init_user(void)
+{
+	//user initialization
+	autoshift_disable();
+}
+
+void matrix_scan_user(void)
+{
+	//user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t* record)
+{
+	static uint32_t key_timer;
+
+	switch (keycode) {
+	case REBOOT:
+		if (record->event.pressed) {
+			key_timer = timer_read32();
+		} else {
+			if (timer_elapsed32(key_timer) >= 500) {
+				rgb_matrix_enable_noeeprom();
+				rgb_matrix_mode_noeeprom(1);
+				rgb_matrix_sethsv_noeeprom(11, 11, 11);
+				wait_ms(150);
+				reset_keyboard();
+			} else {
+				register_code(KC_RCTL);
+				tap_code(KC_B);
+				unregister_code(KC_RCTL);
+			}
+		}
+
+		return false;
+
+	case MAS_CRM:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(32, 160, 255);
+		}
+
+		return false;
+
+	case MAS_PRP:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(192, 112, 255);
+		}
+
+		return false;
+
+	case MAS_RED:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(0, 255, 255);
+		}
+
+		return false;
+
+	case MAS_GRN:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(88, 255, 255);
+		}
+
+		return false;
+
+	case MAS_BLU:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(168, 255, 255);
+		}
+
+		return false;
+
+	case MAS_CYN:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(128, 255, 255);
+		}
+
+		return false;
+
+	case MAS_MGT:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(216, 255, 255);
+		}
+
+		return false;
+
+	case MAS_YEL:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(40, 255, 255);
+		}
+
+		return false;
+
+	case MAS_KEY:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(0, 0, 0);
+		}
+
+		return false;
+
+	case MAS_WHT:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(128, 0, 255);
+		}
+
+		return false;
+
+	default:
+		return true;
+	}
+}

keyboards/dztech/dz60rgb/keymaps/matthewrobo/rules.mk

@@ -0,0 +1,7 @@
+NKRO_ENABLE = yes                 # USB Nkey Rollover
+AUTO_SHIFT_ENABLE = yes      # Auto Shift
+# VELOCIKEY_ENABLE = yes
+
+EXTRAFLAGS += -flto
+
+# SRC += dz60rgb.c

keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c

@@ -2,91 +2,95 @@
 #include "konstantin.h"
 
 enum keycodes_keymap {
-  RCTRL = RANGE_KEYMAP,
+    RCTRL = RANGE_KEYMAP,
 };
 
 enum layers_keymap {
-  L_RCTRL = L_RANGE_KEYMAP,
+    L_RCTRL = L_RANGE_KEYMAP,
 };
 
-bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-  case RCTRL:
-    if (record->event.pressed) {
-      layer_on(L_RCTRL);
-      register_code(KC_RCTRL);
-    } else {
-      layer_off(L_RCTRL);
-      unregister_code(KC_RCTRL);
-    }
-    return false;
+void eeconfig_init_keymap(void) {
+    rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL);
+}
 
-  default:
-    return true;
-  }
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+    case RCTRL:
+        if (record->event.pressed) {
+            register_code(KC_RCTRL);
+            layer_on(L_RCTRL);
+        } else {
+            unregister_code(KC_RCTRL);
+            layer_off(L_RCTRL);
+        }
+        return false;
+
+    default:
+        return true;
+    }
 }
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Base layer
-   * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
-   * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │
-   * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
-   * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Bspc │
-   * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
-   * │LCtCps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │
-   * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
-   * │LShiftFn│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│FnL│
-   * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
-   *       │LGu│LAlt │           Space           │RAlGu│RCt│
-   *       └───┴─────┴───────────────────────────┴─────┴───┘
-   */
-  [L_BASE] = LAYOUT(
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
-    LCT_CPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
-    LSFT_FN, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, FN_FNLK,
-    XXXXXXX, KC_LGUI, KC_LALT,                   KC_SPC,                    RAL_RGU, RCTRL,   XXXXXXX
-  ),
+    /* Base layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+     * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Bspc │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+     * │LCtCps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+     * │LShiftFn│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│FnL│
+     * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
+     *       │LGu│LAlt │           Space           │RAlGu│RCt│
+     *       └───┴─────┴───────────────────────────┴─────┴───┘
+     */
+    [L_BASE] = LAYOUT(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+        LCT_CPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+        LSFT_FN, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, FN_FNLK,
+        XXXXXXX, KC_LGUI, KC_LALT,                   KC_SPC,                    RAL_RGU, RCTRL,   XXXXXXX
+    ),
 
-  /* Function layer
-   * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
-   * │   │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│PSc│Ins│
-   * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
-   * │     │Hom│ ↑ │End│PgU│   │   │   │   │M1 │M↑ │M2 │M3 │ Del │
-   * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
-   * │      │ ← │ ↓ │ → │PgD│   │   │   │MW↑│M← │M↓ │M→ │        │
-   * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
-   * │        │Mut│Vo-│Vo+│Ply│Prv│Nxt│MW←│MW→│M4 │M5 │      │   │
-   * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
-   *       │DPR│DstNA│            MW↓            │MAcl2│   │
-   *       └───┴─────┴───────────────────────────┴─────┴───┘
-   */
-  [L_FN] = LAYOUT(
-    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,
-    _______, KC_HOME, KC_UP,   KC_END,  KC_PGUP, _______, _______, _______, _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_BTN3, KC_DEL,
-    _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, _______,
-    _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_WH_L, KC_WH_R, KC_BTN4, KC_BTN5, _______, _______,
-    XXXXXXX, DST_P_R, DST_N_A,                   KC_WH_D,                   KC_ACL2, _______, XXXXXXX
-  ),
+    /* Function layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+     * │   │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│PSc│Ins│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+     * │     │Hom│ ↑ │End│PgU│   │   │   │   │M1 │M↑ │M3 │M2 │ Del │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+     * │      │ ← │ ↓ │ → │PgD│   │   │   │MW↑│M← │M↓ │M→ │        │
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+     * │        │Mut│Vo-│Vo+│Ply│Prv│Nxt│MW←│MW→│M4 │M5 │      │   │
+     * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
+     *       │   │     │            MW↓            │MAcl2│   │
+     *       └───┴─────┴───────────────────────────┴─────┴───┘
+     */
+    [L_FN] = LAYOUT(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,
+        _______, KC_HOME, KC_UP,   KC_END,  KC_PGUP, _______, _______, _______, _______, KC_BTN1, KC_MS_U, KC_BTN3, KC_BTN2, KC_DEL,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, _______,
+        _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_WH_L, KC_WH_R, KC_BTN4, KC_BTN5, _______, _______,
+        XXXXXXX, _______, _______,                   KC_WH_D,                   KC_ACL2, _______, XXXXXXX
+    ),
 
-  /* RCtrl layer
-   * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
-   * │   │   │   │   │   │   │   │   │   │   │   │   │   │   │   │
-   * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
-   * │     │Top│Mv↑│Btm│PrT│   │   │   │   │   │   │   │   │Clear│
-   * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
-   * │      │Mv←│Mv↓│Mv→│NxT│   │   │   │   │   │   │   │        │
-   * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
-   * │        │   │   │   │   │   │   │   │   │   │   │      │   │
-   * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
-   *       │DtR│DstA │                           │     │   │
-   *       └───┴─────┴───────────────────────────┴─────┴───┘
-   */
-  [L_RCTRL] = LAYOUT(
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, TOP,     MV_UP,   BOTTOM,  PRV_TAB, _______, _______, _______, _______, _______, _______, _______, _______, CLEAR,
-    _______, MV_LEFT, MV_DOWN, MV_RGHT, NXT_TAB, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    XXXXXXX, DST_REM, DST_ADD,                   _______,                   _______, _______, XXXXXXX
-  ),
+    /* RCtrl layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+     * │   │   │   │   │   │   │   │   │   │   │   │   │   │   │Clr│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+     * │     │Top│Mv↑│Btm│TPr│   │   │   │   │   │   │   │   │DelNx│
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+     * │      │Mv←│Mv↓│Mv→│TNx│   │   │   │   │   │   │   │        │
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+     * │        │RTg│RV-│RV+│   │   │   │   │   │   │   │      │   │
+     * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
+     *       │DPR│DstNA│                           │     │   │
+     *       └───┴─────┴───────────────────────────┴─────┴───┘
+     */
+    [L_RCTRL] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLEAR,
+        _______, TOP,     MV_UP,   BOTTOM,  TAB_PRV, _______, _______, _______, _______, _______, _______, _______, _______, DEL_NXT,
+        _______, MV_LEFT, MV_DOWN, MV_RGHT, TAB_NXT, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, RGB_TOG, RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        XXXXXXX, DST_P_R, DST_N_A,                   _______,                   _______, _______, XXXXXXX
+    ),
 };

keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk

@@ -1,11 +1,11 @@
 BOOTMAGIC_ENABLE  = no
 COMMAND_ENABLE    = yes
-CONSOLE_ENABLE    = yes
+CONSOLE_ENABLE    = no
 EXTRAKEY_ENABLE   = yes
 MOUSEKEY_ENABLE   = yes
 NKRO_ENABLE       = yes
 TAP_DANCE_ENABLE  = yes
-UNICODEMAP_ENABLE = yes
+UNICODEMAP_ENABLE = no
 
-BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE  = no
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE  = yes

keyboards/massdrop/ctrl/keymaps/matthewrobo/config.h

@@ -0,0 +1,52 @@
+#pragma once
+
+#define FORCE_NKRO
+
+#define PERMISSIVE_HOLD
+#define TAPPING_TERM 150
+
+// #define DISABLE_RGB_MATRIX_ALPHAS_MODS
+#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#define DISABLE_RGB_MATRIX_BREATHING
+#define DISABLE_RGB_MATRIX_CYCLE_ALL
+#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+// #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#define DISABLE_RGB_MATRIX_DUAL_BEACON
+#define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#define DISABLE_RGB_MATRIX_RAINDROPS
+#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+// #define DISABLE_RGB_MATRIX_SPLASH
+// #define DISABLE_RGB_MATRIX_MULTISPLASH
+// #define DISABLE_RGB_MATRIX_SOLID_SPLASH
+// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+#define QMK_KEYS_PER_SCAN 4
+
+// #define RGB_MATRIX_KEYRELEASES
+
+
+// some speed shit
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#ifndef NO_DEBUG
+#define NO_DEBUG
+#endif // !NO_DEBUG
+#if !defined(NO_PRINT) && !defined(CONSOLE_ENABLE)
+#define NO_PRINT
+#endif // !NO_PRINT
+
+#define NO_ACTION_ONESHOT
+#define TAPPING_FORCE_HOLD
+#define IGNORE_MOD_TAP_INTERRUPT

keyboards/massdrop/ctrl/keymaps/matthewrobo/keymap.c

@@ -0,0 +1,405 @@
+#include QMK_KEYBOARD_H
+extern bool g_suspend_state;
+
+enum ctrl_layers {
+	_QWERTY,
+	_NAV,
+	_FNC
+};
+
+enum ctrl_keycodes {
+	U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active
+	U_T_AGCR,              //USB Toggle Automatic GCR control
+	DBG_TOG,               //DEBUG Toggle On / Off
+	DBG_MTRX,              //DEBUG Toggle Matrix Prints
+	DBG_KBD,               //DEBUG Toggle Keyboard Prints
+	DBG_MOU,               //DEBUG Toggle Mouse Prints
+	MD_BOOT,               //Restart into bootloader after hold timeout
+	MAS_TOG,
+	MAS_CRM,
+	MAS_PRP,
+	MAS_RED,
+	MAS_GRN,
+	MAS_BLU,
+	MAS_CYN,
+	MAS_MGT,
+	MAS_YEL,
+	MAS_KEY,
+	MAS_WHT,
+};
+
+#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode
+#define LT_CAPS LT(_NAV, KC_CAPS)
+#define _V_V_V_ KC_TRNS
+extern rgb_config_t rgb_matrix_config;
+extern bool autoshift_enabled;
+
+
+keymap_config_t keymap_config;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[_QWERTY] = LAYOUT(
+		KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS, \
+		KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,   KC_INS,  KC_HOME, KC_PGUP, \
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,   KC_DEL,  KC_END,  KC_PGDN, \
+		LT_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+		KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC,                              KC_UP, \
+		KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                             KC_RALT, MO(_FNC), KC_APP,  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RGHT \
+	),
+	[_NAV] = LAYOUT(
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, _______, _______, \
+		_______, _______, _______, _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   KC_PAST, KC_PMNS, KC_PPLS, _______,   _______, _______, _______, \
+		_______, KC_PGUP, KC_HOME, KC_UP,   KC_END,  _______, _______, KC_P4,   KC_P5,   KC_P6,   KC_PSLS, _______, _______, KC_EQL,    _______, _______, _______, \
+		_V_V_V_, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_P1,   KC_P2,   KC_P3,   KC_PMNS, KC_PPLS, _______, \
+		_______, _______, _______, _______, _______, _______, KC_P0,   KC_P0,   KC_P0,   KC_PDOT, KC_PSLS, _______,                              _______, \
+		_______, _______, _______,                   _______,                            _______, _______, _______, _______,            _______, _______, _______  \
+	),
+	[_FNC] = LAYOUT(
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            KC_MUTE, KC_MSEL, KC_ASTG, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   KC_MSTP, KC_MPLY, KC_VOLU, \
+		_______, RGB_MOD, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, MAS_MGT, MAS_BLU, MAS_WHT, RGB_RMOD, RGB_MOD, _______,   KC_MPRV, KC_MNXT, KC_VOLD, \
+		_______, RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD, _______, MAS_RED, MAS_KEY, MAS_CYN, MAS_PRP, _______, _______, \
+		MAS_TOG, RGB_TOG, _______, _______, _______, MD_BOOT, TG_NKRO, MAS_YEL, MAS_GRN, MAS_CRM, _______, _______,                              RGB_VAI, \
+		_______, _______, _______,                   _______,                            _______, _V_V_V_, _______, _______,            RGB_SPD, RGB_VAD, RGB_SPI  \
+	),
+	/*
+	[X] = LAYOUT(
+	    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, _______, _______, \
+	    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______, _______, \
+	    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______, _______, \
+	    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+	    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                              _______, \
+	    _______, _______, _______,                   _______,                            _______, _______, _______, _______,            _______, _______, _______ \
+	),
+	[X] = LAYOUT(
+	    0,       1,       2,       3,       4,       5,       6,       7,       8,       9,       10,      11,      12,                 13,      14,      15,      \
+	    16,      17,      18,      19,      20,      21,      22,      23,      24,      25,      26,      27,      28,      29,        30,      31,      32,      \
+	    33,      34,      35,      36,      37,      38,      39,      40,      41,      42,      43,      44,      45,      46,        47,      48,      49,      \
+	    50,      51,      52,      53,      54,      55,      56,      57,      58,      59,      60,      61,      62,      \
+	    63,      64,      65,      66,      67,      68,      69,      70,      71,      72,      73,      74,                                   75,      \
+	    76,      77,      78,                        79,                                 80,      81,      82,      83,                 84,      85,      86      \
+	),
+	*/
+};
+
+extern rgb_led g_rgb_leds[DRIVER_LED_TOTAL];
+void set_color_helper(int index, uint8_t red, uint8_t green, uint8_t blue)
+{
+	if (!HAS_ANY_FLAGS(g_rgb_leds[index].flags, rgb_matrix_get_flags()))
+	{ return; }
+
+	rgb_matrix_set_color(index, red, green, blue);
+}
+
+void rgb_matrix_indicators_user(void)
+{
+	uint8_t this_led = host_keyboard_leds();
+
+	if (!g_suspend_state && rgb_matrix_config.enable) {
+		switch (biton32(layer_state)) {
+		case _NAV:
+			if (this_led & (1 << USB_LED_NUM_LOCK)) {
+				rgb_matrix_set_color(41, 0xFF, 0x00, 0x00);
+			} else {
+				rgb_matrix_set_color(41, 0x00, 0x00, 0x00);
+			}
+
+			// layer indicator
+			rgb_matrix_set_color(50, 0xFF, 0xFF, 0xFF);
+			rgb_matrix_set_color(101, 0xFF, 0xFF, 0xFF);
+			// ESDF
+			rgb_matrix_set_color(36, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(52, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(53, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(54, 0xFF, 0x00, 0x00);
+			// home/end
+			rgb_matrix_set_color(35, 0x00, 0xFF, 0x00);
+			rgb_matrix_set_color(37, 0x00, 0xFF, 0x00);
+			// pgup/dn
+			rgb_matrix_set_color(34, 0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(51, 0x00, 0x00, 0xFF);
+			// numpad
+			rgb_matrix_set_color(23, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(24, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(25, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(40, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(42, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(57, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(58, 0xFF, 0xFF, 0x00);
+			rgb_matrix_set_color(59, 0xFF, 0xFF, 0x00);
+			// zero
+			rgb_matrix_set_color(69, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(70, 0xFF, 0x00, 0x00);
+			rgb_matrix_set_color(71, 0xFF, 0x00, 0x00);
+			// dot
+			rgb_matrix_set_color(72, 0x00, 0x00, 0xFF);
+			// math shit
+			rgb_matrix_set_color(26,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(27,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(28,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(43,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(46,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(60,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(61,  0x00, 0x00, 0xFF);
+			rgb_matrix_set_color(73,  0x00, 0x00, 0xFF);
+			break;
+
+		case _FNC: {
+			HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val };
+			HSV hui = hsv;
+			HSV hud = hsv;
+			HSV sai = hsv;
+			HSV sad = hsv;
+			HSV vai = hsv;
+			HSV vad = hsv;
+			hui.h = hsv.h + 8;
+			hud.h = hsv.h - 8;
+			sai.s = hsv.s + 16 > 255 ? 255u : hsv.s + 16;
+			sad.s = hsv.s - 16 < 0   ?   0 : hsv.s - 16;
+			vai.v = hsv.v + 16 > 255 ? 255 : hsv.v + 16;
+			vad.v = hsv.v - 16 < 0   ?   0 : hsv.v - 16;
+			RGB rgb = hsv_to_rgb(hsv);
+			RGB rgbHUI = hsv_to_rgb(hui);
+			RGB rgbHUD = hsv_to_rgb(hud);
+			RGB rgbSAI = hsv_to_rgb(sai);
+			RGB rgbSAD = hsv_to_rgb(sad);
+			RGB rgbVAI = hsv_to_rgb(vai);
+			RGB rgbVAD = hsv_to_rgb(vad);
+			rgb_matrix_set_color(81, 0xFF, 0xFF, 0xFF); // layer indicator
+			rgb_matrix_set_color(91, 0xFF, 0xFF, 0xFF);
+			rgb_matrix_set_color(93, 0x00, 0x00, 0x00);
+			rgb_matrix_set_color(94, rgb.r, rgb.g, rgb.b);
+			rgb_matrix_set_color(95, rgb.r, rgb.g, rgb.b);
+			rgb_matrix_set_color(96, 0x00, 0x00, 0x00);
+			rgb_matrix_set_color(68, 0xFF, 0x00, 0x00); // MD_BOOT
+			rgb_matrix_set_color(69, 0xFF, 0x00, 0x40); // TG_NKRO
+			rgb_matrix_set_color(32, 0x00, 0x80, 0xFF); // KC_VOLU
+			rgb_matrix_set_color(49, 0x00, 0x80, 0xFF);
+			rgb_matrix_set_color(13, 0xFF, 0x00, 0x00); // KC_MUTE
+			rgb_matrix_set_color(30, 0xFF, 0x00, 0x00); // KC_MSTP
+			rgb_matrix_set_color(47, 0xFF, 0x40, 0x00); // KC_MPRV
+			rgb_matrix_set_color(48, 0xFF, 0x40, 0x00);
+			rgb_matrix_set_color(14, 0x00, 0xFF, 0x00); // KC_MSEL
+			rgb_matrix_set_color(31, 0x00, 0xFF, 0x00); // KC_MPLY
+
+			if (this_led & (1 << !autoshift_enabled)) {
+				rgb_matrix_set_color(15, 0xFF, 0x00, 0x00); // KC_ASTG
+			} else {
+				rgb_matrix_set_color(15, 0xFF, 0xFF, 0x00);
+			}
+
+			rgb_matrix_set_color(44, 0xFF, 0x80, 0x00); //RGB_MOD
+			rgb_matrix_set_color(45, 0xFF, 0x80, 0x00);
+			rgb_matrix_set_color(34, 0xFF, 0x80, 0x00); //RGB_MOD
+			rgb_matrix_set_color(51, 0xFF, 0x80, 0x00);
+			rgb_matrix_set_color(63, 0xFF, 0x40, 0x00); //RGB_TOG
+			rgb_matrix_set_color(64, rgb.r, rgb.g, rgb.b); //MAS_TOG
+			rgb_matrix_set_color(36, rgbHUI.r, rgbHUI.g, rgbHUI.b); //RGB_HUI
+			rgb_matrix_set_color(53, rgbHUD.r, rgbHUD.g, rgbHUD.b);
+			rgb_matrix_set_color(37, rgbSAI.r, rgbSAI.g, rgbSAI.b); //RGB_SAI
+			rgb_matrix_set_color(54, rgbSAD.r, rgbSAD.g, rgbSAD.b);
+			rgb_matrix_set_color(38, rgbVAI.r, rgbVAI.g, rgbVAI.b); //RGB_VAI
+			rgb_matrix_set_color(55, rgbVAD.r, rgbVAD.g, rgbVAD.b);
+			rgb_matrix_set_color(79, rgb.r, rgb.g, rgb.b); // config display
+			rgb_matrix_set_color(75, rgbVAI.r, rgbVAI.g, rgbVAI.b); //RGB_VAI
+			rgb_matrix_set_color(85, rgbVAD.r, rgbVAD.g, rgbVAD.b);
+			rgb_matrix_set_color(35, 0x80, 0x80, 0x80); //RGB_SPI
+			rgb_matrix_set_color(52, 0x80, 0x80, 0x80);
+			rgb_matrix_set_color(84, 0x80, 0x80, 0x80); //RGB_SPI
+			rgb_matrix_set_color(86, 0x80, 0x80, 0x80);
+			rgb_matrix_set_color(41, 0xF0, 0x00, 0xFF); //MAS_MGT
+			rgb_matrix_set_color(42, 0x00, 0x02, 0xFF); //MAS_BLU
+			rgb_matrix_set_color(57, 0xFF, 0x00, 0x00); //MAS_RED
+			rgb_matrix_set_color(58, 0x00, 0x00, 0x00); //MAS_KEY
+			rgb_matrix_set_color(59, 0x00, 0xFF, 0xF7); //MAS_CYN
+			rgb_matrix_set_color(70, 0xFF, 0xDA, 0x00); //MAS_YEL
+			rgb_matrix_set_color(71, 0x00, 0xFF, 0x01); //MAS_GRN
+			rgb_matrix_set_color(72, 0xFF, 0xA5, 0x18); //MAS_CRM
+			rgb_matrix_set_color(60, 0x81, 0x3C, 0xFF); //MAS_PRP
+			rgb_matrix_set_color(26, 0xFF, 0xFF, 0xFF); //MAS_WHT
+		}
+		break;
+		}
+	}
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void)
+{
+	autoshift_disable();
+	rgb_matrix_sethsv(192, 112, 255);
+	rgb_matrix_mode(4);
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void)
+{
+};
+
+#define MODS_SHIFT  (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT))
+#define MODS_CTRL  (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL))
+#define MODS_ALT  (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT))
+
+bool process_record_user(uint16_t keycode, keyrecord_t* record)
+{
+	static uint32_t key_timer;
+
+	switch (keycode) {
+	case U_T_AUTO:
+		if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
+			TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode");
+		}
+
+		return false;
+
+	case U_T_AGCR:
+		if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
+			TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode");
+		}
+
+		return false;
+
+	case DBG_TOG:
+		if (record->event.pressed) {
+			TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode");
+		}
+
+		return false;
+
+	case DBG_MTRX:
+		if (record->event.pressed) {
+			TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix");
+		}
+
+		return false;
+
+	case DBG_KBD:
+		if (record->event.pressed) {
+			TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard");
+		}
+
+		return false;
+
+	case DBG_MOU:
+		if (record->event.pressed) {
+			TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse");
+		}
+
+		return false;
+
+	case MD_BOOT:
+		if (record->event.pressed) {
+			key_timer = timer_read32();
+		} else {
+			if (timer_elapsed32(key_timer) >= 500) {
+				reset_keyboard();
+			}
+		}
+
+		return false;
+
+	case MAS_TOG:
+		if (record->event.pressed) {
+			switch (rgb_matrix_get_flags()) {
+			case LED_FLAG_ALL: {
+				rgb_matrix_set_flags(LED_FLAG_KEYLIGHT);
+				rgb_matrix_set_color_all(0, 0, 0);
+			}
+			break;
+
+			case LED_FLAG_KEYLIGHT: {
+				rgb_matrix_set_flags(LED_FLAG_UNDERGLOW);
+				rgb_matrix_set_color_all(0, 0, 0);
+			}
+			break;
+
+			case LED_FLAG_UNDERGLOW: {
+				rgb_matrix_set_flags(LED_FLAG_NONE);
+				rgb_matrix_disable_noeeprom();
+			}
+			break;
+
+			default: {
+				rgb_matrix_set_flags(LED_FLAG_ALL);
+			}
+			break;
+			}
+		}
+
+		return false;
+
+	case MAS_CRM:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(32, 160, 255);
+		}
+
+		return false;
+
+	case MAS_PRP:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(192, 112, 255);
+		}
+
+		return false;
+
+	case MAS_RED:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(0, 255, 255);
+		}
+
+		return false;
+
+	case MAS_GRN:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(88, 255, 255);
+		}
+
+		return false;
+
+	case MAS_BLU:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(168, 255, 255);
+		}
+
+		return false;
+
+	case MAS_CYN:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(128, 255, 255);
+		}
+
+		return false;
+
+	case MAS_MGT:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(216, 255, 255);
+		}
+
+		return false;
+
+	case MAS_YEL:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(40, 255, 255);
+		}
+
+		return false;
+
+	case MAS_KEY:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(0, 0, 0);
+		}
+
+		return false;
+
+	case MAS_WHT:
+		if (record->event.pressed) {
+			rgb_matrix_sethsv(128, 0, 255);
+		}
+
+		return false;
+
+	default:
+		return true; //Process all other keycodes normally
+	}
+}
+

keyboards/massdrop/ctrl/keymaps/matthewrobo/rules.mk

@@ -0,0 +1,2 @@
+NKRO_ENABLE = yes           # USB Nkey Rollover
+AUTO_SHIFT_ENABLE = yes      # Auto Shift

keyboards/melody96/keymaps/konstantin/keymap.c

@@ -2,77 +2,77 @@
 #include "konstantin.h"
 
 static const hsv_t *colors[] = { &GODSPEED_BLUE, &GODSPEED_YELLOW };
-static size_t cnum = sizeof colors / sizeof *colors;
+static const size_t cnum = sizeof colors / sizeof *colors;
 static size_t cidx = 0;
 
-void eeconfig_init_keymap(void) {
-  rgblight_sethsv(colors[cidx]->h, colors[cidx]->s, colors[cidx]->v);
-}
-
 enum keycodes_keymap {
-  RGB_SET = RANGE_KEYMAP,
+    RGB_SET = RANGE_KEYMAP,
 };
 
-bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-  case RGB_SET:
-    if (record->event.pressed) {
-      cidx = (cidx + 1) % cnum;
-      rgblight_sethsv(colors[cidx]->h, colors[cidx]->s, colors[cidx]->v);
-    }
-    return false;
+void eeconfig_init_keymap(void) {
+    rgblight_sethsv(colors[cidx]->h, colors[cidx]->s, colors[cidx]->v);
+}
 
-  default:
-    return true;
-  }
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+    case RGB_SET:
+        if (record->event.pressed) {
+            cidx = (cidx + 1) % cnum;
+            rgblight_sethsv(colors[cidx]->h, colors[cidx]->s, colors[cidx]->v);
+        }
+        return false;
+
+    default:
+        return true;
+    }
 }
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Base layer
-   * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
-   * │Esc│F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│PSc│Ins│Hom│End│PgU│PgD│
-   * ├───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤
-   * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │Del│NLk│P/ │P* │P- │
-   * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┼───┼───┼───┤
-   * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Bspc │P7 │P8 │P9 │   │
-   * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┼───┼───┤P+ │
-   * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │P4 │P5 │P6 │   │
-   * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┼───┼───┼───┤
-   * │LSft│RAG│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │P1 │P2 │P3 │   │
-   * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴──┬───┼───┼───┼───┼───┤PEn│
-   * │LCtl│LGui│LAlt│         Space          │RAlGu│RCtrl│ ← │ ↓ │ → │P0 │P. │   │
-   * └────┴────┴────┴────────────────────────┴─────┴─────┴───┴───┴───┴───┴───┴───┘
-   */
-  [L_BASE] = LAYOUT( \
-    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,  KC_HOME, KC_END,  KC_PGUP, KC_PGDN,
-    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_P7,   KC_P8,   KC_P9,   XXXXXXX,
-    FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
-    KC_LSFT, RAL_RGU, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_P1,   KC_P2,   KC_P3,   XXXXXXX,
-    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             RAL_RGU, XXXXXXX, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT
-  ),
+    /* Base layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+     * │Esc│F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│PSc│Ins│Hom│End│PgU│PgD│
+     * ├───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤
+     * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │Del│NLk│P/ │P* │P- │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┼───┼───┼───┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Bspc │P7 │P8 │P9 │   │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┼───┼───┤P+ │
+     * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │P4 │P5 │P6 │   │
+     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┼───┼───┼───┤
+     * │LSft│RAG│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │P1 │P2 │P3 │   │
+     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬┴──┬───┼───┼───┼───┼───┤PEn│
+     * │LCtl│LGui│LAlt│         Space          │RAG│FnL│RCt│ ← │ ↓ │ → │P0 │P. │   │
+     * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┴───┴───┴───┴───┘
+     */
+    [L_BASE] = LAYOUT(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,  KC_HOME, KC_END,  KC_PGUP, KC_PGDN,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_P7,   KC_P8,   KC_P9,   XXXXXXX,
+        FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_LSFT, RAL_RGU, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_P1,   KC_P2,   KC_P3,   XXXXXXX,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             RAL_RGU, FN_FNLK, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT
+    ),
 
-  /* Function layer
-   * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
-   * │   │   │   │   │   │   │   │   │   │   │   │   │   │Sys│SLk│Pau│Brk│Top│Btm│
-   * ├───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤
-   * │   │   │   │   │   │   │   │   │   │   │   │   │   │   │   │RTg│ ÷ │ × │ − │
-   * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┼───┼───┼───┤
-   * │ M4  │M2 │M↑ │M1 │M3 │M5 │   │UCM│   │Stp│Ply│Prv│Nxt│Clear│RH+│RS+│RV+│   │
-   * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┼───┼───┤RSt│
-   * │      │M← │M↓ │M→ │MW↑│   │   │   │   │   │   │   │        │RH-│RS-│RV-│   │
-   * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┼───┼───┼───┤
-   * │    │   │MA0│MA2│MW←│MW→│   │   │   │Vo-│Vo+│Mut│      │PgU│RMR│RMS│RMB│   │
-   * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴──┬───┼───┼───┼───┼───┤RMP│
-   * │    │DtPR│DtNA│          MW↓           │     │ App │Hom│PgD│End│RM-│RM+│   │
-   * └────┴────┴────┴────────────────────────┴─────┴─────┴───┴───┴───┴───┴───┴───┘
-   */
-  [L_FN] = LAYOUT( \
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_SYSR, KC_SLCK, KC_PAUS, KC_BRK,  TOP,     BOTTOM,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, DIVIDE,  TIMES,   MINUS,
-    KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD,  _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, CLEAR,            RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX,
-    _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______,                   RGB_HUD, RGB_SAD, RGB_VAD, RGB_SET,
-    _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______,          KC_PGUP, RGB_M_R, RGB_M_SN,RGB_M_B, XXXXXXX,
-    _______, DST_P_R, DST_N_A,                            KC_WH_D,                            _______, XXXXXXX, KC_APP,  KC_HOME, KC_PGDN, KC_END,  RGB_RMOD,RGB_MOD, RGB_M_P
-  ),
+    /* Function layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+     * │   │   │   │   │   │   │   │   │   │   │   │   │   │Sys│SLk│Pau│Brk│Top│Btm│
+     * ├───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤
+     * │   │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│   │   │RTg│ ÷ │ × │ − │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┼───┼───┼───┤
+     * │ M4  │M2 │M↑ │M1 │M3 │M5 │   │UCM│   │Stp│Ply│Prv│Nxt│Clear│RH+│RS+│RV+│   │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┼───┼───┤RSt│
+     * │      │M← │M↓ │M→ │MW↑│   │   │   │   │   │   │   │        │RH-│RS-│RV-│   │
+     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┼───┼───┼───┤
+     * │    │   │MA0│MA2│MW←│MW→│   │   │   │Vo-│Vo+│Mut│      │PgU│RMR│RMS│RMB│   │
+     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬┴──┬───┼───┼───┼───┼───┤RMP│
+     * │    │DtPR│DtNA│          MW↓           │   │   │App│Hom│PgD│End│RM-│RM+│   │
+     * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┴───┴───┴───┴───┘
+     */
+    [L_FN] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_SYSR, KC_SLCK, KC_PAUS, KC_BRK,  TOP,     BOTTOM,
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, RGB_TOG, DIVIDE,  TIMES,   MINUS,
+        KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD,  _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, CLEAR,            RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX,
+        _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______,                   RGB_HUD, RGB_SAD, RGB_VAD, RGB_SET,
+        _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______,          KC_PGUP, RGB_M_R, RGB_M_SN,RGB_M_B, XXXXXXX,
+        _______, DST_P_R, DST_N_A,                            KC_WH_D,                            _______, _______, KC_APP,  KC_HOME, KC_PGDN, KC_END,  RGB_RMOD,RGB_MOD, RGB_M_P
+    ),
 };

keyboards/planck/ez/config.h

@@ -51,6 +51,9 @@
 #undef AUDIO_VOICES
 #undef C6_AUDIO
 
+#define A5_AUDIO
+#define DAC_OFF_VALUE 4095
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 6
 

keyboards/planck/keymaps/synth_sample/config.h

@@ -0,0 +1,39 @@
+#pragma once
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+// Most tactile encoders have detents every 4 stages
+#define ENCODER_RESOLUTION 4
+

keyboards/planck/keymaps/synth_sample/keymap.c

@@ -0,0 +1,298 @@
+/* Copyright 2019 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  BACKLIT,
+  EXT_PLV
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_planck_grid(
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT_planck_grid(
+    KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+    KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT_planck_grid(
+    KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT ,
+    BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_planck_grid(
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
+    _______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_planck_grid(
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_PLOVER] = LAYOUT_planck_grid(
+    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   ,
+    XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,
+    XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_planck_grid(
+    _______, RESET,   DEBUG,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD,  RGB_VAI, RGB_VAD, KC_DEL ,
+    _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK,  DVORAK,  PLOVER,  _______,
+    _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  TERM_ON, TERM_OFF, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______
+)
+
+};
+
+#ifdef AUDIO_ENABLE
+  float plover_song[][2]     = SONG(PLOVER_SOUND);
+  float plover_gb_song[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+#endif
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+        #ifdef KEYBOARD_planck_rev5
+          PORTE &= ~(1<<6);
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+        #ifdef KEYBOARD_planck_rev5
+          PORTE |= (1<<6);
+        #endif
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_SONG(plover_song);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void encoder_update(bool clockwise) {
+    if (clockwise) {
+      #ifdef MOUSEKEY_ENABLE
+        register_code(KC_MS_WH_DOWN);
+        unregister_code(KC_MS_WH_DOWN);
+      #else
+        register_code(KC_PGDN);
+        unregister_code(KC_PGDN);
+      #endif
+    } else {
+      #ifdef MOUSEKEY_ENABLE
+        register_code(KC_MS_WH_UP);
+        unregister_code(KC_MS_WH_UP);
+      #else
+        register_code(KC_PGUP);
+        unregister_code(KC_PGUP);
+      #endif
+    }
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool music_mask_user(uint16_t keycode) {
+  switch (keycode) {
+    case RAISE:
+    case LOWER:
+      return false;
+    default:
+      return true;
+  }
+}
+
+#include "sample.h"
+
+uint32_t dac_sample_custom_counter = 0;
+
+uint16_t dac_value_generate(void) {
+  if (is_playing_note()) {
+    uint16_t sample = dac_sample_custom[dac_sample_custom_counter];
+    dac_sample_custom_counter = (dac_sample_custom_counter + 1) % DAC_SAMPLE_CUSTOM_LENGTH;
+    return sample;
+  } else {
+    return DAC_OFF_VALUE;
+  }
+}

keyboards/planck/keymaps/synth_wavetable/config.h

@@ -0,0 +1,39 @@
+#pragma once
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+// Most tactile encoders have detents every 4 stages
+#define ENCODER_RESOLUTION 4
+

keyboards/planck/keymaps/synth_wavetable/keymap.c

@@ -0,0 +1,326 @@
+/* Copyright 2019 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "audio.h"
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  BACKLIT,
+  EXT_PLV
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_planck_grid(
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT_planck_grid(
+    KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+    KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT_planck_grid(
+    KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT ,
+    BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_planck_grid(
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
+    _______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_planck_grid(
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_PLOVER] = LAYOUT_planck_grid(
+    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   ,
+    XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,
+    XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_planck_grid(
+    _______, RESET,   DEBUG,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD,  RGB_VAI, RGB_VAD, KC_DEL ,
+    _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK,  DVORAK,  PLOVER,  _______,
+    _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  TERM_ON, TERM_OFF, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______
+)
+
+};
+
+#ifdef AUDIO_ENABLE
+  float plover_song[][2]     = SONG(PLOVER_SOUND);
+  float plover_gb_song[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+#endif
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+        #ifdef KEYBOARD_planck_rev5
+          PORTE &= ~(1<<6);
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+        #ifdef KEYBOARD_planck_rev5
+          PORTE |= (1<<6);
+        #endif
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_SONG(plover_song);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool music_mask_user(uint16_t keycode) {
+  switch (keycode) {
+    case RAISE:
+    case LOWER:
+      return false;
+    default:
+      return true;
+  }
+}
+
+#include "wavetable.h"
+
+float dac_if[8] = {0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0};
+uint8_t dac_morph = 0;
+// uint8_t dac_morph_flipped = 0;
+// uint16_t dac_morph_counter = 0;
+
+void dac_setup_note(void) {
+  dac_if[dac_number_of_voices()] = 0.0f;
+}
+
+uint16_t dac_value_generate(void) {
+  uint16_t value = DAC_OFF_VALUE;
+  uint8_t working_voices = dac_number_of_voices();
+  if (working_voices > DAC_VOICES_MAX)
+    working_voices = DAC_VOICES_MAX;
+
+  if (working_voices > 0) {
+    uint16_t value_avg = 0;
+    for (uint8_t i = 0; i < working_voices; i++) {
+      dac_if[i] = dac_if[i] + ((dac_get_frequency(i) * DAC_BUFFER_SIZE) / DAC_SAMPLE_RATE);
+
+      // Needed because % doesn't work with floats
+      while (dac_if[i] >= (DAC_BUFFER_SIZE))
+        dac_if[i] = dac_if[i] - DAC_BUFFER_SIZE;
+
+      // #define DAC_MORPH_SPEED 372
+      // #define DAC_MORPH_SPEED_COMPUTED (DAC_SAMPLE_RATE / DAC_WAVETABLE_CUSTOM_LENGTH * (1000 / DAC_MORPH_SPEED))
+
+      uint16_t dac_i = (uint16_t)dac_if[i];
+      // value_avg += dac_buffer_custom[dac_morph_flipped][dac_i] / working_voices / 2 * ((dac_morph >= 63) ? 6400 - dac_morph_counter : dac_morph_counter) / 6400;
+      // value_avg += dac_buffer_custom[dac_morph_flipped + 1][dac_i] / working_voices / 2 * ((dac_morph >= 63) ? dac_morph_counter : 6400 - dac_morph_counter) / 6400;
+
+      // value_avg += dac_wavetable_custom[dac_morph][dac_i] / working_voices / 2 * (DAC_MORPH_SPEED_COMPUTED - dac_morph_counter) / DAC_MORPH_SPEED_COMPUTED;
+      // value_avg += dac_wavetable_custom[dac_morph + 1][dac_i] / working_voices / 2 * dac_morph_counter / DAC_MORPH_SPEED_COMPUTED;
+      value_avg += dac_wavetable_custom[dac_morph][dac_i] / working_voices;
+    }
+    value = value_avg;
+
+    // dac_morph_counter++;
+    // if (dac_morph_counter >= DAC_MORPH_SPEED_COMPUTED) {
+      // dac_morph_counter = 0;
+      // dac_morph = (dac_morph + 1) % 125;
+      // dac_morph_flipped = ((dac_morph >= 63) ? (125 - dac_morph) : dac_morph);
+      // dac_morph = (dac_morph + 1) % (DAC_WAVETABLE_CUSTOM_LENGTH - 1);
+    // }
+  }
+  return value;
+}
+
+void encoder_update(bool clockwise) {
+  if (clockwise) {
+    dac_morph = (dac_morph + 1) % DAC_WAVETABLE_CUSTOM_LENGTH;
+  } else {
+    if (dac_morph == 0)
+      dac_morph = (DAC_WAVETABLE_CUSTOM_LENGTH - 1);
+    else
+      dac_morph--;
+  }
+}

keyboards/planck/rev6/config.h

@@ -51,6 +51,8 @@
 #undef AUDIO_VOICES
 #undef C6_AUDIO
 
+#define A5_AUDIO
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 6
 

keyboards/planck/rev6/rev6.c

@@ -16,7 +16,9 @@
 #include "rev6.h"
 
 void matrix_init_kb(void) {
-	matrix_init_user();
+    palSetPadMode(GPIOA, 4, PAL_MODE_OUTPUT_PUSHPULL );
+    palSetPad(GPIOA, 4);
+    matrix_init_user();
 }
 
 void matrix_scan_kb(void) {

keyboards/projectkb/alice/alice.c

@@ -0,0 +1,27 @@
+#include "alice.h"
+
+void matrix_init_board(void){
+    setPinOutput(A0);
+    setPinOutput(A1);
+    setPinOutput(A2);
+}
+
+
+void led_set_kb(uint8_t usb_led) {
+    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+        writePinLow(A0);
+    } else {
+        writePinHigh(A0);
+    }
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        writePinLow(A1);
+    } else {
+        writePinHigh(A1);
+    }
+    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+        writePinLow(A2);
+    } else {
+        writePinHigh(A2);
+    }
+    led_set_user(usb_led);
+}

keyboards/projectkb/alice/alice.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include "quantum.h"
+
+#define KNO KC_NO
+
+#define LAYOUT_default( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
+  K10, K11, K12, K13, K14, K15, K16,      K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \
+  K20, K21, K22, K23, K24, K25, K26,      K28, K29, K2A, K2B, K2C, K2D,      K2F, \
+       K31, K32, K33, K34, K35, K36,      K38, K39, K3A, K3B, K3C, K3D, K3E, K3F,         \
+       K41,      K43, K44,      K46,           K49,      K4B,                K4F \
+) { \
+  {  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F  }, \
+  {  K10, K11, K12, K13, K14, K15, K16, KNO, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F  }, \
+  {  K20, K21, K22, K23, K24, K25, K26, KNO, K28, K29, K2A, K2B, K2C, K2D, KNO, K2F  }, \
+  {  KNO, K31, K32, K33, K34, K35, K36, KNO, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F  }, \
+  {  KNO, K41, KNO, K43, K44, KNO, K46, KNO, KNO, K49, KNO, K4B, KNO, KNO, KNO, K4F  }  \
+}

keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -0,0 +1,109 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}

keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -0,0 +1,922 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for ST STM32F072B-Discovery board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_ST_STM32F072B_DISCOVERY
+#define BOARD_NAME                  "ST STM32F072B-Discovery"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: HSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK                32768
+#endif
+
+#define STM32_LSEDRV                (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK                0U
+#endif
+
+#define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F072xB
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON                0U
+#define GPIOA_PIN1                  1U
+#define GPIOA_PIN2                  2U
+#define GPIOA_PIN3                  3U
+#define GPIOA_PIN4                  4U
+#define GPIOA_PIN5                  5U
+#define GPIOA_PIN6                  6U
+#define GPIOA_PIN7                  7U
+#define GPIOA_PIN8                  8U
+#define GPIOA_PIN9                  9U
+#define GPIOA_PIN10                 10U
+#define GPIOA_USB_DM                11U
+#define GPIOA_USB_DP                12U
+#define GPIOA_SWDIO                 13U
+#define GPIOA_SWCLK                 14U
+#define GPIOA_PIN15                 15U
+
+#define GPIOB_PIN0                  0U
+#define GPIOB_PIN1                  1U
+#define GPIOB_PIN2                  2U
+#define GPIOB_PIN3                  3U
+#define GPIOB_PIN4                  4U
+#define GPIOB_PIN5                  5U
+#define GPIOB_PIN6                  6U
+#define GPIOB_PIN7                  7U
+#define GPIOB_PIN8                  8U
+#define GPIOB_PIN9                  9U
+#define GPIOB_PIN10                 10U
+#define GPIOB_PIN11                 11U
+#define GPIOB_PIN12                 12U
+#define GPIOB_SPI2_SCK              13U
+#define GPIOB_SPI2_MISO             14U
+#define GPIOB_SPI2_MOSI             15U
+
+#define GPIOC_MEMS_CS               0U
+#define GPIOC_PIN1                  1U
+#define GPIOC_PIN2                  2U
+#define GPIOC_PIN3                  3U
+#define GPIOC_PIN4                  4U
+#define GPIOC_PIN5                  5U
+#define GPIOC_LED_RED               6U
+#define GPIOC_LED_BLUE              7U
+#define GPIOC_LED_ORANGE            8U
+#define GPIOC_LED_GREEN             9U
+#define GPIOC_PIN10                 10U
+#define GPIOC_PIN11                 11U
+#define GPIOC_PIN12                 12U
+#define GPIOC_PIN13                 13U
+#define GPIOC_OSC32_IN              14U
+#define GPIOC_OSC32_OUT             15U
+
+#define GPIOD_PIN0                  0U
+#define GPIOD_PIN1                  1U
+#define GPIOD_PIN2                  2U
+#define GPIOD_PIN3                  3U
+#define GPIOD_PIN4                  4U
+#define GPIOD_PIN5                  5U
+#define GPIOD_PIN6                  6U
+#define GPIOD_PIN7                  7U
+#define GPIOD_PIN8                  8U
+#define GPIOD_PIN9                  9U
+#define GPIOD_PIN10                 10U
+#define GPIOD_PIN11                 11U
+#define GPIOD_PIN12                 12U
+#define GPIOD_PIN13                 13U
+#define GPIOD_PIN14                 14U
+#define GPIOD_PIN15                 15U
+
+#define GPIOE_PIN0                  0U
+#define GPIOE_PIN1                  1U
+#define GPIOE_PIN2                  2U
+#define GPIOE_PIN3                  3U
+#define GPIOE_PIN4                  4U
+#define GPIOE_PIN5                  5U
+#define GPIOE_PIN6                  6U
+#define GPIOE_PIN7                  7U
+#define GPIOE_PIN8                  8U
+#define GPIOE_PIN9                  9U
+#define GPIOE_PIN10                 10U
+#define GPIOE_PIN11                 11U
+#define GPIOE_PIN12                 12U
+#define GPIOE_PIN13                 13U
+#define GPIOE_PIN14                 14U
+#define GPIOE_PIN15                 15U
+
+#define GPIOF_OSC_IN                0U
+#define GPIOF_OSC_OUT               1U
+#define GPIOF_PIN2                  2U
+#define GPIOF_PIN3                  3U
+#define GPIOF_PIN4                  4U
+#define GPIOF_PIN5                  5U
+#define GPIOF_PIN6                  6U
+#define GPIOF_PIN7                  7U
+#define GPIOF_PIN8                  8U
+#define GPIOF_PIN9                  9U
+#define GPIOF_PIN10                 10U
+#define GPIOF_PIN11                 11U
+#define GPIOF_PIN12                 12U
+#define GPIOF_PIN13                 13U
+#define GPIOF_PIN14                 14U
+#define GPIOF_PIN15                 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
+#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
+
+#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
+#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
+#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
+
+#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
+#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
+#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
+#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
+#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
+#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
+#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
+
+
+
+#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n)              (0U << (n))
+#define PIN_ODR_HIGH(n)             (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
+#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0  - BUTTON                    (input floating).
+ * PA1  - PIN1                      (input pullup).
+ * PA2  - PIN2                      (input pullup).
+ * PA3  - PIN3                      (input pullup).
+ * PA4  - PIN4                      (input pullup).
+ * PA5  - PIN5                      (input pullup).
+ * PA6  - PIN6                      (input pullup).
+ * PA7  - PIN7                      (input pullup).
+ * PA8  - PIN8                      (input pullup).
+ * PA9  - PIN9                      (input pullup).
+ * PA10 - PIN10                     (input pullup).
+ * PA11 - USB_DM                    (input floating).
+ * PA12 - USB_DP                    (input floating).
+ * PA13 - SWDIO                     (alternate 0).
+ * PA14 - SWCLK                     (alternate 0).
+ * PA15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
+                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
+                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
+                                     PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
+                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
+                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
+                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
+                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
+                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
+                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
+                                     PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
+#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0  - PIN0                      (input pullup).
+ * PB1  - PIN1                      (input pullup).
+ * PB2  - PIN2                      (input pullup).
+ * PB3  - PIN3                      (input pullup).
+ * PB4  - PIN4                      (input pullup).
+ * PB5  - PIN5                      (input pullup).
+ * PB6  - PIN6                      (input pullup).
+ * PB7  - PIN7                      (input pullup).
+ * PB8  - PIN8                      (input pullup).
+ * PB9  - PIN9                      (input pullup).
+ * PB10 - PIN10                     (input pullup).
+ * PB11 - PIN11                     (input pullup).
+ * PB12 - PIN12                     (input pullup).
+ * PB13 - SPI2_SCK                  (alternate 0).
+ * PB14 - SPI2_MISO                 (alternate 0).
+ * PB15 - SPI2_MOSI                 (alternate 0).
+ */
+#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
+#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0  - MEMS_CS                   (output pushpull maximum).
+ * PC1  - PIN1                      (input pullup).
+ * PC2  - PIN2                      (input pullup).
+ * PC3  - PIN3                      (input pullup).
+ * PC4  - PIN4                      (input pullup).
+ * PC5  - PIN5                      (input pullup).
+ * PC6  - LED_RED                   (output pushpull maximum).
+ * PC7  - LED_BLUE                  (output pushpull maximum).
+ * PC8  - LED_ORANGE                (output pushpull maximum).
+ * PC9  - LED_GREEN                 (output pushpull maximum).
+ * PC10 - PIN10                     (input pullup).
+ * PC11 - PIN11                     (input pullup).
+ * PC12 - PIN12                     (input pullup).
+ * PC13 - PIN13                     (input pullup).
+ * PC14 - OSC32_IN                  (input floating).
+ * PC15 - OSC32_OUT                 (input floating).
+ */
+#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
+                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
+                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
+                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
+                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
+                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
+                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
+                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
+                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
+#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
+                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
+                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
+                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0  - PIN0                      (input pullup).
+ * PD1  - PIN1                      (input pullup).
+ * PD2  - PIN2                      (input pullup).
+ * PD3  - PIN3                      (input pullup).
+ * PD4  - PIN4                      (input pullup).
+ * PD5  - PIN5                      (input pullup).
+ * PD6  - PIN6                      (input pullup).
+ * PD7  - PIN7                      (input pullup).
+ * PD8  - PIN8                      (input pullup).
+ * PD9  - PIN9                      (input pullup).
+ * PD10 - PIN10                     (input pullup).
+ * PD11 - PIN11                     (input pullup).
+ * PD12 - PIN12                     (input pullup).
+ * PD13 - PIN13                     (input pullup).
+ * PD14 - PIN14                     (input pullup).
+ * PD15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
+#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0  - PIN0                      (input pullup).
+ * PE1  - PIN1                      (input pullup).
+ * PE2  - PIN2                      (input pullup).
+ * PE3  - PIN3                      (input pullup).
+ * PE4  - PIN4                      (input pullup).
+ * PE5  - PIN5                      (input pullup).
+ * PE6  - PIN6                      (input pullup).
+ * PE7  - PIN7                      (input pullup).
+ * PE8  - PIN8                      (input pullup).
+ * PE9  - PIN9                      (input pullup).
+ * PE10 - PIN10                     (input pullup).
+ * PE11 - PIN11                     (input pullup).
+ * PE12 - PIN12                     (input pullup).
+ * PE13 - PIN13                     (input pullup).
+ * PE14 - PIN14                     (input pullup).
+ * PE15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
+#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
+#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0  - OSC_IN                    (input floating).
+ * PF1  - OSC_OUT                   (input floating).
+ * PF2  - PIN2                      (input pullup).
+ * PF3  - PIN3                      (input pullup).
+ * PF4  - PIN4                      (input pullup).
+ * PF5  - PIN5                      (input pullup).
+ * PF6  - PIN6                      (input pullup).
+ * PF7  - PIN7                      (input pullup).
+ * PF8  - PIN8                      (input pullup).
+ * PF9  - PIN9                      (input pullup).
+ * PF10 - PIN10                     (input pullup).
+ * PF11 - PIN11                     (input pullup).
+ * PF12 - PIN12                     (input pullup).
+ * PF13 - PIN13                     (input pullup).
+ * PF14 - PIN14                     (input pullup).
+ * PF15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
+                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
+                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
+                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
+                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
+                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
+                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
+                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
+#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
+
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */

keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/projectkb/alice/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg

@@ -0,0 +1,703 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- STM32F0xx board Template -->
+<board
+  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
+  <configuration_settings>
+    <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
+    <output_path>..</output_path>
+    <hal_version>3.0.x</hal_version>
+  </configuration_settings>
+  <board_name>ST STM32F072B-Discovery</board_name>
+  <board_id>ST_STM32F072B_DISCOVERY</board_id>
+  <board_functions></board_functions>
+  <subtype>STM32F072xB</subtype>
+  <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
+  	LSEBypass="false" LSEDrive="3 High Drive (default)" />
+  <ports>
+    <GPIOA>
+      <pin0
+        ID="BUTTON"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID="USB_DM"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID="USB_DP"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SWDIO"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SWCLK"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullDown"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOA>
+    <GPIOB>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SPI2_SCK"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SPI2_MISO"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID="SPI2_MOSI"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+    </GPIOB>
+    <GPIOC>
+      <pin0
+        ID="MEMS_CS"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Output"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID="LED_RED"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin7
+        ID="LED_BLUE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin8
+        ID="LED_ORANGE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" ></pin8>
+      <pin9
+        ID="LED_GREEN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID="OSC32_IN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID="OSC32_OUT"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOC>
+    <GPIOD>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOD>
+    <GPIOE>
+    	<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    </GPIOE>
+    <GPIOF>
+      <pin0
+        ID="OSC_IN"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID="OSC_OUT"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOF>
+  </ports>
+</board>

keyboards/projectkb/alice/bootloader_defs.h

@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/projectkb/alice/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  FALSE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     FALSE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/projectkb/alice/config.h

@@ -0,0 +1,92 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x0159
+#define PRODUCT_ID      0xA71C
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER ProjectKB
+#define PRODUCT Alice
+#define DESCRIPTION ProjectKB Alice
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+#define MATRIX_COL_PINS { B2, B10, B11, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15, B12 }
+#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_LED_N 14
+#define RGBLED_NUM WS2812_LED_N
+#define PORT_WS2812     GPIOB
+#define PIN_WS2812      15
+#define WS2812_SPI SPID2
+
+
+// EEPROM usage
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x01
+#define EEPROM_VERSION_ADDR 34
+
+#define EEPROM_CUSTOM_BACKLIGHT 804
+
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/projectkb/alice/halconf.h

@@ -0,0 +1,351 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#pragma once
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+/** @} */

keyboards/projectkb/alice/keymaps/default/keymap.c

@@ -0,0 +1,45 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_default(
+    KC_ESC,  KC_TILD, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_DEL,  KC_BSPC,
+    KC_PGUP, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,             KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_PGDN, KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,             KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+             KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,             KC_B,   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RGUI,
+             KC_LCTL,          KC_LALT, KC_SPC,  MO(_FN1),                          KC_SPC,           KC_RALT,          KC_RCTL
+  ),
+
+  [_FN1] = LAYOUT_default(
+    RGB_TOG,  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,  KC_DEL,
+    RGB_MOD,  _______,  _______, KC_UP,  _______, _______, _______,          RGB_SAI, RGB_HUI, RGB_VAI, _______, _______, _______, _______, _______,
+    RGB_RMOD, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,          RGB_SAD, RGB_HUD, RGB_VAD, _______, _______, _______,          _______,
+              _______, BL_INC,  BL_DEC,  BL_TOGG, BL_BRTG, _______,          _______, _______, _______, _______, _______, _______, _______, _______,
+              _______,          _______, _______, _______,                            _______,          _______,          RESET
+  )
+};
+

keyboards/projectkb/alice/mcuconf.h

@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */

keyboards/projectkb/alice/readme.md

@@ -0,0 +1,12 @@
+# ProjectKeyboard Alice PCB
+
+ProjectKeyboard Alice Keyboard Replacement PCB
+
+Keyboard Maintainer: onefiftynine 
+
+Hardware Supported: STM32F072CBT6  
+Make example for this keyboard (after setting up your build environment):
+
+    make projectkb/alice:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/projectkb/alice/rules.mk

@@ -0,0 +1,56 @@
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Build Options
+#   comment out to disable the options.
+#
+
+# project specific files
+VPATH += keyboards/cannonkeys/stm32f072
+SRC =	keyboard.c \
+      led.c
+
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = no # Custom matrix file
+# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
+RGBLIGHT_ENABLE = yes
+
+# RAW_ENABLE = yes
+# DYNAMIC_KEYMAP_ENABLE = yes
+

keyboards/sol/common/knob_v2.c

@@ -1,71 +0,0 @@
-#include "knob_v2.h"
-
-bool knob_prev_a = false;
-static knob_report_t knob_report = {.dir = 0, .phase = 0};
-
-void knob_init(void) {
-    // I use pins D1 (ISR1) & D4 for a knob.
-
-    // Set pin mode for D4 as input.
-    DDRD &= ~(0UL << ENCODER_PIN_2);
-
-    // Enable internal pull-up for D4.
-    // This is done by "writing" 1 to a pin that has its mode set to input.
-    PORTD |= (1 << ENCODER_PIN_2);
-
-    // Enable interrupt for D1
-    // For more info on the below flags see this awesome section 11.1 (pages 89-90) here:
-    // https://cdn-shop.adafruit.com/datasheets/atmel-7766-8-bit-avr-atmega16u4-32u4_datasheet.pdf
-    // Set pin mode & pull-up.
-    DDRD &= ~(0UL << ENCODER_PIN_1);
-    PORTD |= (1UL << ENCODER_PIN_1);
-
-    // INT:    33221100
-    EICRA |= 0b00010000;  // 0b01 - any edge
-    // INT:     6  3210
-    EIMSK |= 0b00000100;
-}
-
-ISR(ENCODER_INT) {
-    bool a = PIND & (1 << ENCODER_PIN_1);
-
-    if (knob_prev_a != a) {
-        // "A" channel has REALLY changed.
-        knob_report.phase = a;
-        knob_prev_a = a;
-        bool b = PIND & (1 << ENCODER_PIN_2);
-        if (a == b) {
-            // Halfway through CCW rotation (A == B)
-            //
-            //         +---YOU ARE HERE (A=1, B=1)
-            //         |     +---OR HERE (A=0, B=0)
-            //         |     |
-            //         v     v
-            // A: _____/^^^^^\__
-            // B: __/^^^^^\_____
-            knob_report.dir++;
-        } else {
-            // Halfway through CW rotation (A != B)
-            //
-            //         +---YOU ARE HERE (A=1, B=0)
-            //         |     +---OR HERE (A=0, B=1)
-            //         |     |
-            //         v     v
-            // A: _____/^^^^^\_____
-            // B: ________/^^^^^\__
-            knob_report.dir--;
-        }
-    }
-}
-
-knob_report_t knob_report_read(void) {
-    // Return knob report.
-    return knob_report;
-}
-
-void knob_report_reset(void) {
-    // Call this ASAP once you've processed the previous knob report.
-    // TODO: This should probably be called within `knob_report_read`.
-    knob_report.dir = 0;
-    knob_report.phase = 0;
-}

keyboards/sol/common/knob_v2.h

@@ -1,28 +0,0 @@
-// Rotary knob implementation - Version 2.
-// Uses 2 digital pins - D2 (via interrupt) & D6.
-// #include "rev1.h"
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <stdbool.h>
-
-#ifndef ENCODER_PIN_1
-  #define ENCODER_PIN_1 PD2
-#endif
-#ifndef ENCODER_PIN_2
-  #define ENCODER_PIN_2 PD6
-#endif
-#ifndef ENCODER_INT
-  #define ENCODER_INT   INT2_vect
-#endif
-
-typedef struct knob_report_t {
-    int8_t dir;  // Contains number of rotations that happened
-    int8_t phase;  // Contains 0 if last rotation happened on 90 degrees, 1 if on 270
-}  knob_report_t;
-
-void knob_init(void);
-knob_report_t knob_report_read(void);
-void knob_report_reset(void);
-
-bool knob_prev_a;
-int8_t knob_dir;

keyboards/sol/config.h

@@ -20,3 +20,73 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
+#define TAPPING_TERM 150
+
+/* Select hand configuration */
+#define SOFT_SERIAL_PIN D3
+#define EE_HANDS
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 12
+#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, E6}
+
+// wiring of each half
+#define MATRIX_COLS 7
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7 }
+
+// Encoder support
+#define NUMBER_OF_ENCODERS 1
+#define ENCODERS_PAD_A { D2 }
+#define ENCODERS_PAD_B { D6 }
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN B3
+
+#ifdef IOS_DEVICE_ENABLE
+  #define RGBLIGHT_LIMIT_VAL 40
+#elif RGBLIGHT_FULL_POWER
+  #define RGBLIGHT_LIMIT_VAL 255
+#else
+  #define RGBLIGHT_LIMIT_VAL 120
+#endif
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS RGBLIGHT_LIMIT_VAL
+
+#define LED_HITS_TO_REMEMBER 5
+
+#define RGBLIGHT_ANIMATIONS
+
+#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
+// USB_MAX_POWER_CONSUMPTION value for Helix keyboard
+//  120  RGBoff, OLEDoff
+//  120  OLED
+//  330  RGB 6
+//  300  RGB 32
+//  310  OLED & RGB 32
+  #define USB_MAX_POWER_CONSUMPTION 500
+#else
+  // fix iPhone and iPad power adapter issue
+  // iOS device need lessthan 100
+  #define USB_MAX_POWER_CONSUMPTION 100
+#endif
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/sol/keymaps/brianweyer/keymap.c

@@ -11,8 +11,6 @@ extern keymap_config_t keymap_config;
 extern rgblight_config_t rgblight_config;
 #endif
 
-extern uint8_t is_master;
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -59,8 +57,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
          LCTL,    LALT,      FN,    LGUI, RGB_MOD,        SPC,     DEL,         BSPC,        SPC,     ADJ,    LGUI,      FN,    LALT,    LCTL,
   //|--------+--------+--------+--------+--------+--+--------+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
-                           VOLD,    VOLU,                 SPC,     ENT,          ENT,        SPC,             DOWN,    UP
-  //                      Rotary Left               |--------+--------|    |--------+-----------+              Rotary Right
+                                                          SPC,     ENT,          ENT,        SPC
+  //                                                |--------+--------|    |--------+-----------+
       ),
 
   /* FN
@@ -90,8 +88,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
       _______, _______, _______, _______, _______,    _______, _______,      _______,    _______, _______, _______, _______, _______, _______,
   //|--------+--------+--------+--------+--------+--+--------+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
-                           VOLD,    VOLU,             _______, _______,      _______,    _______,               UP,    DOWN
-  //                      Rotary Left               |--------+--------|    |--------+-----------+              Rotary Right
+                                                      _______, _______,      _______,    _______
+  //                                                |--------+--------|    |--------+-----------+
       ),
 
   /* ADJ
@@ -122,8 +120,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
       _______, _______, _______, _______, _______,    _______, _______,      _______, _______,    _______, _______, _______, _______, _______, \
   //|--------+--------+--------+--------+--------+--+--------+--------|    |--------+--------+--+--------+--------+--------+--------+--------|
-                        _______, _______,             _______, _______,      _______, _______,             _______, _______ \
-  //                      Rotary Left               |--------+--------|    |--------+--------+              Rotary Right
+                                                      _______, _______,      _______, _______ \
+  //                                                |--------+--------|    |--------+--------+
       )
 };
 
@@ -132,6 +130,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 bool TOG_STATUS = false;
 int RGB_current_mode;
 
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (index == 0) { /* First encoder */
+    if (clockwise) {
+      tap_code(KC_VOLU);
+    } else {
+      tap_code(KC_VOLD);
+    }
+  } else if (index == 1) { /* Second encoder*/
+    if (clockwise) {
+      tap_code(KC_UP);
+    } else {
+      tap_code(KC_DOWN);
+    }
+  }
+}
+#endif
+
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
   switch (keycode) {
@@ -182,7 +198,7 @@ void matrix_init_user(void) {
 #ifdef OLED_DRIVER_ENABLE
 
 oled_rotation_t oled_init_user(oled_rotation_t rotation) {
-  if (!has_usb())
+  if (!is_keyboard_master())
     return OLED_ROTATION_180;  // flip 180 for offhand
   return rotation;
 }
@@ -244,7 +260,7 @@ static void render_status(void) {
 }
 
 void oled_task_user(void) {
-  if (is_master)
+  if (is_keyboard_master())
     render_status();
   else
     render_logo();

keyboards/sol/keymaps/brianweyer/rules.mk

@@ -17,18 +17,12 @@ RGB_MATRIX_KEYPRESSES = no  # Enable reactive per-key effects. Can be very laggy
 RGBLIGHT_FULL_POWER = no    # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
 UNICODE_ENABLE = no         # Unicode
 SWAP_HANDS_ENABLE = no      # Enable one-hand typing
-ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90)
 
 OLED_DRIVER_ENABLE = yes    # Enable the OLED Driver (+5000)
 IOS_DEVICE_ENABLE = no      # Limit max brightness to connect to IOS device (iPad,iPhone)
 
 # Do not edit past here
 
-ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes)
-    OPT_DEFS += -DENCODER_ENABLE_CUSTOM
-    SRC += common/knob_v2.c
-endif
-
 ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
     OPT_DEFS += -DIOS_DEVICE_ENABLE
 else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)

keyboards/sol/keymaps/danielhklein/keymap.c

@@ -11,8 +11,6 @@ extern keymap_config_t keymap_config;
 extern rgblight_config_t rgblight_config;
 #endif
 
-extern uint8_t is_master;
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -64,7 +62,7 @@ LAYOUT( \
       KC_CAPS, _10,     _11,      _12,     _13,     _14,     KC_LCBR,  KC_RCBR, _15,     _16,     _17,     _18,      _19,     KC_QUOT,  \
       KC_LSFT, _20,     _21,      _22,     _23,     _24,     KC_GRV,   KC_BSLS, _25,     _26,     _27,     _28,      _29,     KC_RSFT,  \
       KC_LEFT, KC_DOWN, KC_LCTRL, KC_LALT, KC_LGUI, KC_BSPC, FN,       ADJ,     KC_SPC,  KC_RGUI, KC_RALT, KC_RCTRL, KC_UP,   KC_RIGHT, \
-                        KC_VOLU,  KC_VOLD,          KC_BSPC, FN,       ADJ,     KC_SPC,           KC_VOLU, KC_VOLD \
+                                                    KC_BSPC, FN,       ADJ,     KC_SPC \
 )
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -132,7 +130,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS,  KC_END,  \
       _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MPLY, KC_MUTE, KC_VOLD, KC_VOLU, KC_MRWD, KC_MFFD, \
       XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-                        XXXXXXX, XXXXXXX,          XXXXXXX, _______, XXXXXXX, XXXXXXX,          XXXXXXX, XXXXXXX \
+                                                   XXXXXXX, _______, XXXXXXX, XXXXXXX \
       ),
 
   /* ADJ
@@ -157,7 +155,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       XXXXXXX, RGB_SAD, RGB_VAI, RGB_SAI, XXXXXXX,  XXXXXXX, COLEMAK, XXXXXXX, KC_P4,   KC_P5,   KC_P6,   KC_PENT, XXXXXXX, XXXXXXX, \
       XXXXXXX, RGB_HUD, RGB_VAD, RGB_HUI, XXXXXXX,  XXXXXXX, QWERTY,  XXXXXXX, KC_P1,   KC_P2,   KC_P3,   KC_SPC,  XXXXXXX, XXXXXXX, \
       XXXXXXX, RGBRST,  RGB_TOG, RGB_MOD, RGB_RMOD, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_P0,   KC_PDOT, KC_BSPC, XXXXXXX, XXXXXXX, \
-                        XXXXXXX, XXXXXXX,           XXXXXXX, XXXXXXX, _______, XXXXXXX,          XXXXXXX, XXXXXXX \
+                                                    XXXXXXX, XXXXXXX, _______, XXXXXXX \
       )
 };
 
@@ -165,6 +163,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 bool TOG_STATUS = false;
 int RGB_current_mode;
 
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (index == 0) { /* First encoder */
+    if (clockwise) {
+      tap_code(KC_VOLU);
+    } else {
+      tap_code(KC_VOLD);
+    }
+  } else if (index == 1) { /* Second encoder*/
+    if (clockwise) {
+      tap_code(KC_VOLU);
+    } else {
+      tap_code(KC_VOLD);
+    }
+  }
+}
+#endif
+
 // Setting ADJ layer RGB back to default
 void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
   if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
@@ -308,7 +324,7 @@ static void render_status(void) {
 }
 
 void oled_task_user(void) {
-  if (is_master)
+  if (is_keyboard_master())
     render_status();
   else
     render_logo();

keyboards/sol/keymaps/danielhklein/rules.mk

@@ -17,18 +17,12 @@ RGB_MATRIX_KEYPRESSES = no  # Enable reactive per-key effects. Can be very laggy
 RGBLIGHT_FULL_POWER = no    # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
 UNICODE_ENABLE = no         # Unicode
 SWAP_HANDS_ENABLE = no      # Enable one-hand typing
-ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90)
 
 OLED_DRIVER_ENABLE = no     # Enable the OLED Driver (+5000)
 IOS_DEVICE_ENABLE = no      # Limit max brightness to connect to IOS device (iPad,iPhone)
 
 # Do not edit past here
 
-ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes)
-    OPT_DEFS += -DENCODER_ENABLE_CUSTOM
-    SRC += common/knob_v2.c
-endif
-
 ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
     OPT_DEFS += -DIOS_DEVICE_ENABLE
 else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)

keyboards/sol/keymaps/default/keymap.c

@@ -12,8 +12,6 @@ extern keymap_config_t keymap_config;
 extern rgblight_config_t rgblight_config;
 #endif
 
-extern uint8_t is_master;
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -70,7 +68,7 @@ LAYOUT( \
       FN_CAPS, _10,     _11,     _12,     _13,     _14,    KC_LPRN,  KC_RPRN, _15,     _16,     _17,     _18,     _19,     KC_QUOT, \
       KC_LSFT, _20,     _21,     _22,     _23,     _24,    KC_LCBR,  KC_RCBR, _25,     _26,     _27,     _28,     _29,     KC_ENT, \
       KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG,  ADJ,     KC_SPC, KC_DEL,  KC_ENT,  KC_SPC,  FN,      KC_LEFT, KC_DOWN, KC_UP,  KC_RIGHT, \
-                        KC_VOLU, KC_VOLD,          KC_SPC, KC_DEL,  KC_ENT,  KC_SPC,          KC_VOLU, KC_VOLD \
+                                                    KC_SPC, KC_DEL,  KC_ENT,  KC_SPC \
 )
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -138,7 +136,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \
       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
       _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______,     KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, \
-                        KC_VOLU, KC_VOLD,          _______, _______, _______, _______,           KC_VOLU, KC_VOLD \
+                                                   _______, _______, _______, _______ \
       ),
 
   /* ADJ
@@ -163,7 +161,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       _______, RGB_HUD, RGB_VAD, RGB_HUI, RGBRST,  _______, _______, _______, _______, QWERTY,  COLEMAK, _______, _______, _______, \
       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
       _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, \
-                        KC_VOLU, KC_VOLD,          _______, _______, _______, _______,          KC_VOLU, KC_VOLD \
+                                                   _______, _______, _______, _______ \
       )
 };
 
@@ -173,6 +171,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 bool TOG_STATUS = false;
 int RGB_current_mode;
 
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (index == 0) { /* First encoder */
+    if (clockwise) {
+      tap_code(KC_VOLU);
+    } else {
+      tap_code(KC_VOLD);
+    }
+  } else if (index == 1) { /* Second encoder*/
+    if (clockwise) {
+      tap_code(KC_VOLU);
+    } else {
+      tap_code(KC_VOLD);
+    }
+  }
+}
+#endif
+
 // Setting ADJ layer RGB back to default
 void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
   if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
@@ -316,7 +332,7 @@ static void render_status(void) {
 }
 
 void oled_task_user(void) {
-  if (is_master)
+  if (is_keyboard_master())
     render_status();
   else
     render_logo();

keyboards/sol/keymaps/default/rules.mk

@@ -17,18 +17,12 @@ RGB_MATRIX_KEYPRESSES = no  # Enable reactive per-key effects. Can be very laggy
 RGBLIGHT_FULL_POWER = no    # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
 UNICODE_ENABLE = no         # Unicode
 SWAP_HANDS_ENABLE = no      # Enable one-hand typing
-ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90)
 
 OLED_DRIVER_ENABLE = no     # Enable the OLED Driver (+5000)
 IOS_DEVICE_ENABLE = no      # Limit max brightness to connect to IOS device (iPad,iPhone)
 
 # Do not edit past here
 
-ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes)
-    OPT_DEFS += -DENCODER_ENABLE_CUSTOM
-    SRC += common/knob_v2.c
-endif
-
 ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
     OPT_DEFS += -DIOS_DEVICE_ENABLE
 else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)

keyboards/sol/keymaps/kageurufu/keymap.c

@@ -35,7 +35,7 @@ EXPAND_LAYOUT( \
       FN_ESC,  _10,     _11,     _12,     _13,     _14,    RGB_SAI,  RGB_VAI, _15,     _16,     _17,     _18,     _19,     KC_QUOT, \
       KC_LSPO, _20,     _21,     _22,     _23,     _24,    RGB_SAD,  RGB_VAD, _25,     _26,     _27,     _28,     _29,     KC_RSPC, \
       KC_LCTL, KC_LGUI, KC_LGUI, KC_LALT, FN,      KC_SPC, FN,       FN,      KC_SPC,  KC_MINS, KC_EQL,  KC_DOWN, KC_PGUP, KC_PGDN, \
-                        KC_VOLD, KC_VOLU,          KC_SPC, KC_BSPC,  KC_ENT,  KC_SPC,           KC_VOLD, KC_VOLU \
+                                                   KC_SPC, KC_BSPC,  KC_ENT,  KC_SPC \
 )
 #define BASE_LAYOUT(...) _BASE_LAYOUT(__VA_ARGS__)
 
@@ -65,15 +65,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       ________________FUNCTION_L3________________, _______, _______, ________________FUNCTION_R3________________, \
       ________________FUNCTION_L4________________, _______, _______, ________________FUNCTION_R4________________, \
       ________________FUNCTION_L5________________, ADJ,     ADJ,     ________________FUNCTION_R5________________, \
-               KC_VOLD, KC_VOLU,          _______, KC_DEL,  _______, _______,          KC_VOLD, KC_VOLU \
+                                          _______, KC_DEL,  _______, _______ \
       ),
 
-  [_ADJ] =  EXPAND_LAYOUT( \
+  [_ADJ] = EXPAND_LAYOUT( \
       _________________ADJUST_L1_________________, _______, _______, _________________ADJUST_R1_________________, \
       _________________ADJUST_L2_________________, _______, _______, _________________ADJUST_R2_________________, \
       _________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, \
       _________________ADJUST_L4_________________, _______, _______, _________________ADJUST_R4_________________, \
       _________________ADJUST_L5_________________, _______, _______, _________________ADJUST_R5_________________, \
-               KC_VOLD, KC_VOLU,          _______, _______, _______, _______,          KC_VOLD, KC_VOLU \
+                                          _______, _______, _______, _______ \
       )
 };
+
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (index == 0) { /* First encoder */
+    if (clockwise) {
+      tap_code(KC_VOLU);
+    } else {
+      tap_code(KC_VOLD);
+    }
+  } else if (index == 1) { /* Second encoder*/
+    if (clockwise) {
+      tap_code(KC_VOLU);
+    } else {
+      tap_code(KC_VOLD);
+    }
+  }
+}
+#endif

keyboards/sol/keymaps/kageurufu/rules.mk

@@ -17,18 +17,12 @@ RGB_MATRIX_KEYPRESSES = no  # Enable reactive per-key effects. Can be very laggy
 RGBLIGHT_FULL_POWER = no    # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
 UNICODE_ENABLE = no         # Unicode
 SWAP_HANDS_ENABLE = no      # Enable one-hand typing
-ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90)
 
 OLED_DRIVER_ENABLE = no     # Enable the OLED Driver (+5000)
 IOS_DEVICE_ENABLE = no      # Limit max brightness to connect to IOS device (iPad,iPhone)
 
 # Do not edit past here
 
-ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes)
-    OPT_DEFS += -DENCODER_ENABLE_CUSTOM
-    SRC += common/knob_v2.c
-endif
-
 ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
     OPT_DEFS += -DIOS_DEVICE_ENABLE
 else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)

keyboards/sol/keymaps/xulkal/keymap.c

@@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _________________QWERTY_L3_________________,  KC_GRV,   KC_QUOT,  _________________QWERTY_R3_________________, \
     _________________QWERTY_L4_________________,  RGB_TOG,  RGBRST,   _________________QWERTY_R4_________________, \
     _________________QWERTY_L5_________________,  RGB_RMOD, RGB_MOD,  _________________QWERTY_R5_________________, \
-                KC_VOLU, KC_VOLD,        KC_SPC,  KC_DEL,   KC_ENT,   KC_SPC,        KC_VOLU, KC_VOLD \
+                                         KC_SPC,  KC_DEL,   KC_ENT,   KC_SPC \
   ),
 
 #ifndef GAMELAYER_DISABLE
@@ -46,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ___________________GAME_L3_________________,  KC_GRV,   KC_QUOT,  ___________________GAME_R3_________________, \
     ___________________GAME_L4_________________,  RGB_TOG,  RGBRST,   ___________________GAME_R4_________________, \
     ___________________GAME_L5_________________,  RGB_RMOD, RGB_MOD,  ___________________GAME_R5_________________, \
-                KC_VOLU, KC_VOLD,        KC_SPC,  KC_DEL,   KC_ENT,   KC_SPC,        KC_VOLU, KC_VOLD \
+                                         KC_SPC,  KC_DEL,   KC_ENT,   KC_SPC \
   ),
 #endif
 
@@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     __________________LOWER_L3_________________, _______, _______, __________________LOWER_R3_________________, \
     __________________LOWER_L4_________________, _______, _______, __________________LOWER_R4_________________, \
     __________________LOWER_L5_________________, _______, _______, __________________LOWER_R5_________________, \
-                _______, _______,       _______, _______, _______, _______,          _______, _______ \
+                                        _______, _______, _______, _______ \
   ),
 
   [_RAISE] = EXPAND_LAYOUT( \
@@ -65,7 +65,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     __________________RAISE_L3_________________, _______, _______, __________________RAISE_R3_________________, \
     __________________RAISE_L4_________________, _______, _______, __________________RAISE_R4_________________, \
     __________________RAISE_L5_________________, _______, _______, __________________RAISE_R5_________________, \
-                _______, _______,       _______, _______, _______, _______,          _______, _______ \
+                                        _______, _______, _______, _______ \
   ),
 
 #ifdef TRILAYER_ENABLED
@@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, \
     _________________ADJUST_L4_________________, _______, _______, _________________ADJUST_R4_________________, \
     _________________ADJUST_L5_________________, _______, _______, _________________ADJUST_R5_________________, \
-                _______, _______,       _______, _______, _______, _______,          _______, _______ \
+                                        _______, _______, _______, _______ \
   ),
 #endif
 };
@@ -158,7 +158,7 @@ static void render_status(void) {
 }
 
 void oled_task_user(void) {
-  if (has_usb()) {
+  if (is_keyboard_master()) {
     render_status();
   } else {
     render_logo();

keyboards/sol/keymaps/xulkal/rules.mk

@@ -16,17 +16,12 @@ RGB_MATRIX_KEYPRESSES   = yes   # Enable reactive per-key effects. Can be very l
 RGBLIGHT_FULL_POWER     = no    # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
 UNICODE_ENABLE          = no    # Unicode
 SWAP_HANDS_ENABLE       = no    # Enable one-hand typing
-ENCODER_ENABLE_CUSTOM   = no    # Enable rotary encoder (+90)
 OLED_DRIVER_ENABLE      = yes   # Enable the OLED Driver (+5000)
+ENCODER_ENABLE          = no    # Enable rotary encoder (+90)
 IOS_DEVICE_ENABLE       = no    # Limit max brightness to connect to IOS device (iPad,iPhone)
 
 # Do not edit past here
 
-ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes)
-    OPT_DEFS += -DENCODER_ENABLE_CUSTOM
-    SRC += common/knob_v2.c
-endif
-
 ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
     OPT_DEFS += -DIOS_DEVICE_ENABLE
 else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)

keyboards/sol/rev1/config.h

@@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef REV1_CONFIG_H
-#define REV1_CONFIG_H
+#pragma once
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
@@ -27,117 +26,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT         Sol
 #define DESCRIPTION     "An RGB, split, ortho-esque keyboard"
 
-#define PREVENT_STUCK_MODIFIERS
-#define TAPPING_FORCE_HOLD
-#define TAPPING_TERM 150
-
-#define USE_I2C
-#define USE_SERIAL
-#define USE_SERIAL_PD3
-
-/* Select hand configuration */
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-/* Select rows configuration */
-// Rows are 4 or 5
-// #define HELIX_ROWS 5 see ./rules.mk
-
-/* key matrix size */
-// Rows are doubled-up
-#define MATRIX_ROWS 12
-#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, E6}
-
-// wiring of each half
-#define MATRIX_COLS 7
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7 }
-// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-// #define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN B3
-#define RGBLIGHT_TIMER
-//#define RGBLED_NUM 12    // Number of LEDs. see ./keymaps/default/config.h
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
-
-#define DRIVER_COUNT      1
-// #define RGB_MATRIX_KEYPRESSES
-#define BACKLIGHT_PIN B7
-#define BACKLIGHT_LEVELS 5
-
 #ifdef LED_MIRRORED
   #define RGBLED_NUM 35
 #else
   #define RGBLED_NUM 70
 #endif
 #define DRIVER_LED_TOTAL  RGBLED_NUM
-
-#define RGBLIGHT_RAINBOW_SWIRL_RANGE 1950
-
-#ifdef IOS_DEVICE_ENABLE
-  #define RGBLIGHT_LIMIT_VAL 40
-  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 40
-#elif RGBLIGHT_FULL_POWER
-  #define RGBLIGHT_LIMIT_VAL 255
-  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255
-#else
-  #define RGBLIGHT_LIMIT_VAL 120
-  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
-#endif
-
-#define RGBLIGHT_VAL_STEP (RGBLIGHT_LIMIT_VAL / 10)
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-
-#define RGBLIGHT_ANIMATIONS
-
-#define LED_HITS_TO_REMEMBER 5
-
-#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
-// USB_MAX_POWER_CONSUMPTION value for Helix keyboard
-//  120  RGBoff, OLEDoff
-//  120  OLED
-//  330  RGB 6
-//  300  RGB 32
-//  310  OLED & RGB 32
-  #define USB_MAX_POWER_CONSUMPTION 500
-#else
-  // fix iPhone and iPad power adapter issue
-  // iOS device need lessthan 100
-  #define USB_MAX_POWER_CONSUMPTION 100
-#endif
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif

keyboards/sol/rev1/matrix.c

@@ -1,304 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include <drivers/avr/pro_micro.h>
-
-#include "serial.h"
-
-#ifndef DEBOUNCE
-#  define DEBOUNCE	5
-#endif
-
-#ifdef ENCODER_ENABLE_CUSTOM
-  #include "common/knob_v2.h"
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
-static uint8_t error_count = 0;
-uint8_t is_master = 0 ;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-static uint8_t matrix_master_scan(void);
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    debug_enable = true;
-    debug_matrix = true;
-    debug_mouse = true;
-    // initialize row and col
-    unselect_rows();
-    init_cols();
-
-    TX_RX_LED_INIT;
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-
-    is_master = has_usb();
-
-    #ifdef ENCODER_ENABLE_CUSTOM
-        knob_init();  //FOR ENCODER
-    #endif
-    matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void)
-{
-    // Right hand is stored after the left in the matirx so, we need to offset it
-    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-
-    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-        select_row(i);
-        _delay_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i+offset] != cols) {
-            matrix_debouncing[i+offset] = cols;
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-                matrix[i+offset] = matrix_debouncing[i+offset];
-            }
-        }
-    }
-
-    #ifdef ENCODER_ENABLE_CUSTOM
-      knob_report_t knob_report = knob_report_read();
-
-      knob_report_reset();
-
-      matrix[5 + offset] &= 0b11111100;
-      if (knob_report.phase) { // I check for phase to avoid handling the rotation twice (on 90 and 270 degrees).
-        if (knob_report.dir > 0) {
-          matrix[5 + offset] |= 0b00000001;
-        } else if (knob_report.dir < 0) {
-          matrix[5 + offset] |= 0b00000010;
-        }
-      }
-    #endif
-
-    return 1;
-}
-
-int serial_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-    int ret=serial_update_buffers();
-    if (ret ) {
-        return 1;
-    }
-
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        matrix[slaveOffset+i] = serial_slave_buffer[i];
-    }
-    return 0;
-}
-
-uint8_t matrix_scan(void)
-{
-    if (is_master) {
-        matrix_master_scan();
-    }else{
-        matrix_slave_scan();
-
-        int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
-
-        for (int i = 0; i < ROWS_PER_HAND; ++i) {
-            matrix[offset+i] = serial_master_buffer[i];
-        }
-
-        matrix_scan_quantum();
-    }
-    return 1;
-}
-
-
-uint8_t matrix_master_scan(void) {
-
-    int ret = _matrix_scan();
-
-    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        serial_master_buffer[i] = matrix[offset+i];
-    }
-
-    if( serial_transaction() ) {
-        // turn on the indicator led when halves are disconnected
-        TXLED1;
-
-        error_count++;
-
-        if (error_count > ERROR_DISCONNECT_COUNT) {
-            // reset other half if disconnected
-            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-            for (int i = 0; i < ROWS_PER_HAND; ++i) {
-                matrix[slaveOffset+i] = 0;
-            }
-        }
-    } else {
-        // turn off the indicator led on no error
-        TXLED0;
-        error_count = 0;
-    }
-    matrix_scan_quantum();
-    return ret;
-}
-
-void matrix_slave_scan(void) {
-    _matrix_scan();
-
-    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        serial_slave_buffer[i] = matrix[offset+i];
-    }
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
-    }
-    return count;
-}
-
-static void  init_cols(void)
-{
-    for(int x = 0; x < MATRIX_COLS; x++) {
-        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
-        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
-    }
-}
-
-static matrix_row_t read_cols(void)
-{
-    matrix_row_t result = 0;
-    for(int x = 0; x < MATRIX_COLS; x++) {
-        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
-    }
-    return result;
-}
-
-static void unselect_rows(void)
-{
-    for(int x = 0; x < ROWS_PER_HAND; x++) {
-        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
-        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
-    }
-}
-
-static void select_row(uint8_t row)
-{
-    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
-    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
-}

keyboards/sol/rev1/rev1.c

@@ -1,4 +1,4 @@
-#include "sol.h"
+#include "quantum.h"
 
 #ifdef RGB_MATRIX_ENABLE
   rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
@@ -81,7 +81,3 @@
   };
 #endif
 
-void matrix_init_kb(void) {
-	matrix_init_user();
-};
-

keyboards/sol/rev1/rev1.h

@@ -1,70 +1 @@
-#ifndef REV1_H
-#define REV1_H
-
-#include "sol.h"
-
-//void promicro_bootloader_jmp(bool program);
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-//rgb led driver
-#include "ws2812.h"
-#endif
-
-#ifdef USE_I2C
-#include <stddef.h>
-#ifdef __AVR__
-	#include <avr/io.h>
-	#include <avr/interrupt.h>
-#endif
-#endif
-
-//void promicro_bootloader_jmp(bool program);
-// LEL/LER/REL/RER are
-//   LeftEncoderLeft, LeftEncoderRight, RightEncoderLeft, and RightEncoderRight
-
-#define LAYOUT( \
-  L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \
-  L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \
-  L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \
-  L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \
-  L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \
-            LEL, LER,      L55, L56, R56, R50,      REL, RER \
-  ) \
-  { \
-    { L00, L01, L02, L03, L04, L05, L06 }, \
-    { L10, L11, L12, L13, L14, L15, L16 }, \
-    { L20, L21, L22, L23, L24, L25, L26 }, \
-    { L30, L31, L32, L33, L34, L35, L36 }, \
-    { L40, L41, L42, L43, L44, L45, L46 }, \
-    { LEL, LER, KC_NO, KC_NO, KC_NO, L55, L56 }, \
-    { R05, R04, R03, R02, R01, R00, R06 }, \
-    { R15, R14, R13, R12, R11, R10, R16 }, \
-    { R25, R24, R23, R22, R21, R20, R26 }, \
-    { R35, R34, R33, R32, R31, R30, R36 }, \
-    { R45, R44, R43, R42, R41, R40, R46 }, \
-    { REL, RER, KC_NO, KC_NO, KC_NO, R50, R56 } \
-  }
-
-#define KC________ KC_TRNS
-#define KC_RGB_MOD RGB_MOD
-#define KC_FN FN
-#define KC_ADJ ADJ
-#define LAYOUT_kc( \
-  L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \
-  L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \
-  L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \
-  L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \
-  L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \
-            LEL, LER,      L55, L56, R56, R50,      REL, RER \
-  ) \
-  LAYOUT( \
-    KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
-    KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
-    KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
-    KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \
-    KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##L46, KC_##R46, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45, \
-                        KC_##LEL, KC_##LER,      KC_##L55, KC_##L56, KC_##R56, KC_##R50,      KC_##REL, KC_##RER \
-  )
-
-#endif
+#pragma once

keyboards/sol/rev1/rules.mk

@@ -1,2 +0,0 @@
-SRC += rev1/matrix.c \
-	     rev1/split_util.c

keyboards/sol/rev1/split_util.c

@@ -1,54 +0,0 @@
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-#include "serial.h"
-
-volatile bool isLeftHand = true;
-
-static void setup_handedness(void) {
-  #ifdef EE_HANDS
-    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
-  #else
-    #if defined(MASTER_RIGHT)
-      isLeftHand = !has_usb();
-    #else
-      isLeftHand = has_usb();
-    #endif
-  #endif
-}
-
-static void keyboard_master_setup(void) {
-    serial_master_init();
-}
-
-static void keyboard_slave_setup(void) {
-    serial_slave_init();
-}
-
-bool has_usb(void) {
-   USBCON |= (1 << OTGPADE); //enables VBUS pad
-   _delay_us(5);
-   return (USBSTA & (1<<VBUS));  //checks state of VBUS
-}
-
-void split_keyboard_setup(void) {
-   setup_handedness();
-
-   if (has_usb()) {
-      keyboard_master_setup();
-   } else {
-      keyboard_slave_setup();
-   }
-   sei();
-}
-
-// this code runs before the usb and keyboard is initialized
-void matrix_setup(void) {
-    split_keyboard_setup();
-}

keyboards/sol/rev1/split_util.h

@@ -1,15 +0,0 @@
-#ifndef SPLIT_KEYBOARD_UTIL_H
-#define SPLIT_KEYBOARD_UTIL_H
-
-#include <stdbool.h>
-#include "eeconfig.h"
-
-extern volatile bool isLeftHand;
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
-
-void split_keyboard_setup(void);
-bool has_usb(void);
-
-#endif

keyboards/sol/rules.mk

@@ -1,5 +1,3 @@
-SRC += serial.c
-
 # MCU name
 #MCU = at90usb1287
 MCU = atmega32u4
@@ -48,6 +46,9 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 # Custom local font file
 OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\"
 
+SPLIT_KEYBOARD = yes
+ENCODER_ENABLE = yes
+
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
@@ -62,6 +63,4 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 
-CUSTOM_MATRIX = yes
-
 DEFAULT_FOLDER = sol/rev1

keyboards/sol/serial.c

@@ -1,288 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <stdbool.h>
-#include "serial.h"
-
-#ifdef USE_SERIAL
-
-#define _delay_sub_us(x)    __builtin_avr_delay_cycles(x)
-
-// Serial pulse period in microseconds.
-#define SELECT_SERIAL_SPEED 1
-#if SELECT_SERIAL_SPEED == 0
-  // Very High speed
-  #define SERIAL_DELAY 4             // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
-#elif SELECT_SERIAL_SPEED == 1
-  // High speed
-  #define SERIAL_DELAY 6             // micro sec
-  #define READ_WRITE_START_ADJUST 23 // cycles
-  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
-#elif SELECT_SERIAL_SPEED == 2
-  // Middle speed
-  #define SERIAL_DELAY 12            // micro sec
-  #define READ_WRITE_START_ADJUST 25 // cycles
-  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
-#elif SELECT_SERIAL_SPEED == 3
-  // Low speed
-  #define SERIAL_DELAY 24            // micro sec
-  #define READ_WRITE_START_ADJUST 25 // cycles
-  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
-#elif SELECT_SERIAL_SPEED == 4
-  // Very Low speed
-  #define SERIAL_DELAY 50            // micro sec
-  #define READ_WRITE_START_ADJUST 25 // cycles
-  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
-#else
-#error Illegal Serial Speed
-#endif
-
-
-#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
-#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
-
-#define SLAVE_INT_WIDTH 1
-#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
-
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-
-#define SLAVE_DATA_CORRUPT (1<<0)
-volatile uint8_t status = 0;
-
-inline static
-void serial_delay(void) {
-  _delay_us(SERIAL_DELAY);
-}
-
-inline static
-void serial_delay_half1(void) {
-  _delay_us(SERIAL_DELAY_HALF1);
-}
-
-inline static
-void serial_delay_half2(void) {
-  _delay_us(SERIAL_DELAY_HALF2);
-}
-
-inline static
-void serial_output(void) {
-  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static
-void serial_input_with_pullup(void) {
-  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
-  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-inline static
-uint8_t serial_read_pin(void) {
-  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
-}
-
-inline static
-void serial_low(void) {
-  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
-}
-
-inline static
-void serial_high(void) {
-  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-void serial_master_init(void) {
-  serial_output();
-  serial_high();
-}
-
-void serial_slave_init(void) {
-  serial_input_with_pullup();
-
-
-// Enable INT3
-EIMSK |= _BV(INT3);
-// Trigger on falling edge of INT3
-EICRA &= ~(_BV(ISC30) | _BV(ISC31));
-
-}
-
-// Used by the sender to synchronize timing with the reciver.
-static
-void sync_recv(void) {
-  for (int i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
-  }
-  // This shouldn't hang if the slave disconnects because the
-  // serial line will float to high if the slave does disconnect.
-  while (!serial_read_pin());
-}
-
-// Used by the reciver to send a synchronization signal to the sender.
-static
-void sync_send(void) {
-  serial_low();
-  serial_delay();
-  serial_high();
-}
-
-// Reads a byte from the serial line
-static
-uint8_t serial_read_byte(void) {
-  uint8_t byte = 0;
-  _delay_sub_us(READ_WRITE_START_ADJUST);
-  for ( uint8_t i = 0; i < 8; ++i) {
-    serial_delay_half1();   // read the middle of pulses
-    byte = (byte << 1) | serial_read_pin();
-    _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
-    serial_delay_half2();
-  }
-  return byte;
-}
-
-// Sends a byte with MSB ordering
-static
-void serial_write_byte(uint8_t data) {
-  uint8_t b = 1<<7;
-  while( b ) {
-    if(data & b) {
-      serial_high();
-    } else {
-      serial_low();
-    }
-    b >>= 1;
-    serial_delay();
-  }
-  serial_low(); // sync_send() / senc_recv() need raise edge
-}
-
-// interrupt handle to be used by the slave device
-ISR(SERIAL_PIN_INTERRUPT) {
-  serial_output();
-
-  // slave send phase
-  uint8_t checksum = 0;
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
-    sync_send();
-    serial_write_byte(serial_slave_buffer[i]);
-    checksum += serial_slave_buffer[i];
-  }
-  sync_send();
-  serial_write_byte(checksum);
-
-  // slave switch to input
-  sync_send(); //0
-  serial_delay_half1(); //1
-  serial_low();         //2
-  serial_input_with_pullup(); //2
-  serial_delay_half1(); //3
-
-  // slave recive phase
-  uint8_t checksum_computed = 0;
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
-    sync_recv();
-    serial_master_buffer[i] = serial_read_byte();
-    checksum_computed += serial_master_buffer[i];
-  }
-  sync_recv();
-  uint8_t checksum_received = serial_read_byte();
-
-  if ( checksum_computed != checksum_received ) {
-    status |= SLAVE_DATA_CORRUPT;
-  } else {
-    status &= ~SLAVE_DATA_CORRUPT;
-  }
-
-  sync_recv(); //weit master output to high
-}
-
-inline
-bool serial_slave_DATA_CORRUPT(void) {
-  return status & SLAVE_DATA_CORRUPT;
-}
-
-// Copies the serial_slave_buffer to the master and sends the
-// serial_master_buffer to the slave.
-//
-// Returns:
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers(void) {
-  // this code is very time dependent, so we need to disable interrupts
-  cli();
-
-  // signal to the slave that we want to start a transaction
-  serial_output();
-  serial_low();
-  _delay_us(SLAVE_INT_WIDTH);
-
-  // wait for the slaves response
-  serial_input_with_pullup();
-  _delay_us(SLAVE_INT_RESPONSE_TIME);
-
-  // check if the slave is present
-  if (serial_read_pin()) {
-    // slave failed to pull the line low, assume not present
-    serial_output();
-    serial_high();
-    sei();
-    return 1;
-  }
-
-  // master recive phase
-  // if the slave is present syncronize with it
-
-  uint8_t checksum_computed = 0;
-  // receive data from the slave
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
-    sync_recv();
-    serial_slave_buffer[i] = serial_read_byte();
-    checksum_computed += serial_slave_buffer[i];
-  }
-  sync_recv();
-  uint8_t checksum_received = serial_read_byte();
-
-  if (checksum_computed != checksum_received) {
-    serial_output();
-    serial_high();
-    sei();
-    return 2;
-  }
-
-  // master switch to output
-  sync_recv(); //0
-  serial_delay();  //1
-  serial_low();    //3
-  serial_output(); // 3
-  serial_delay_half1(); //4
-
-  // master send phase
-  uint8_t checksum = 0;
-
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
-    sync_send();
-    serial_write_byte(serial_master_buffer[i]);
-    checksum += serial_master_buffer[i];
-  }
-  sync_send();
-  serial_write_byte(checksum);
-
-  // always, release the line when not in use
-  sync_send();
-
-  sei();
-  return 0;
-}
-
-#endif

keyboards/sol/serial.h

@@ -1,26 +0,0 @@
-#ifndef MY_SERIAL_H
-#define MY_SERIAL_H
-
-#include <stdbool.h>
-
-/* TODO:  some defines for interrupt setup */
-#define SERIAL_PIN_DDR DDRD
-#define SERIAL_PIN_PORT PORTD
-#define SERIAL_PIN_INPUT PIND
-#define SERIAL_PIN_MASK _BV(PD3) //SErial pin goes here, D0-D3
-#define SERIAL_PIN_INTERRUPT INT3_vect //"INT#" of your serial pin
-
-
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-
-// Buffers for master - slave communication
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(void);
-bool serial_slave_data_corrupt(void);
-
-#endif

keyboards/sol/sol.h

@@ -1,7 +1,53 @@
-#ifndef SOL_H
-#define SOL_H
+#pragma once
 
-#include "rev1.h"
 #include "quantum.h"
-
+#ifdef KEYBOARD_sol_rev1
+#include "rev1.h"
+#elif KEYBOARD_sol_rev2
+#include "rev2.h"
 #endif
+
+
+#define LAYOUT( \
+  L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \
+  L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \
+  L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \
+  L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \
+  L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \
+                           L55, L56, R56, R50 \
+  ) \
+  { \
+    { L00, L01, L02, L03, L04, L05, L06 }, \
+    { L10, L11, L12, L13, L14, L15, L16 }, \
+    { L20, L21, L22, L23, L24, L25, L26 }, \
+    { L30, L31, L32, L33, L34, L35, L36 }, \
+    { L40, L41, L42, L43, L44, L45, L46 }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, L55, L56 }, \
+    { R05, R04, R03, R02, R01, R00, R06 }, \
+    { R15, R14, R13, R12, R11, R10, R16 }, \
+    { R25, R24, R23, R22, R21, R20, R26 }, \
+    { R35, R34, R33, R32, R31, R30, R36 }, \
+    { R45, R44, R43, R42, R41, R40, R46 }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, R50, R56 } \
+  }
+
+#define KC________ KC_TRNS
+#define KC_RGB_MOD RGB_MOD
+#define KC_FN FN
+#define KC_ADJ ADJ
+#define LAYOUT_kc( \
+  L00, L01, L02, L03, L04, L05, L06, R06, R00, R01, R02, R03, R04, R05, \
+  L10, L11, L12, L13, L14, L15, L16, R16, R10, R11, R12, R13, R14, R15, \
+  L20, L21, L22, L23, L24, L25, L26, R26, R20, R21, R22, R23, R24, R25, \
+  L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \
+  L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45, \
+                           L55, L56, R56, R50 \
+  ) \
+  LAYOUT( \
+    KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
+    KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
+    KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
+    KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \
+    KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##L46, KC_##R46, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45, \
+                                                      KC_##L55, KC_##L56, KC_##R56, KC_##R50 \
+  )

keyboards/ut472/config.h

@@ -0,0 +1,60 @@
+/*
+Copyright 2018 Carlos Filoteo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Keyhive
+#define PRODUCT         UT47.2
+#define DESCRIPTION     An awesome 40% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D1, D2, D3, D4 }
+#define MATRIX_COL_PINS { C4, C5, B7, B6, B5, B4, B3, B2, B1, B0, D6, D5 }
+#define UNUSED_PINS
+
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGB_DI_PIN C6
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 8
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/ut472/info.json

@@ -0,0 +1,13 @@
+{
+  "keyboard_name": "UT47.2",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 12.5,
+  "height": 4,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 47,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Backspace", "x":11, "y":0, "w":1.5}, {"label":"LT(3) / Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"\"", "x":11.25, "y":1, "w":1.25}, {"label":"Shift", "x":0, "y":2, "w":1.5}, {"label":"Z", "x":1.5, "y":2}, {"label":"X", "x":2.5, "y":2}, {"label":"C", "x":3.5, "y":2}, {"label":"V", "x":4.5, "y":2}, {"label":"B", "x":5.5, "y":2}, {"label":"N", "x":6.5, "y":2}, {"label":"M", "x":7.5, "y":2}, {"label":"<", "x":8.5, "y":2}, {"label":">", "x":9.5, "y":2}, {"label":"?", "x":10.5, "y":2}, {"label":"Shift / Enter", "x":11.5, "y":2}, {"label":"Ctrl", "x":0, "y":3}, {"label":"Alt", "x":1, "y":3}, {"label":"GUI", "x":2, "y":3}, {"label":"Menu", "x":3, "y":3}, {"label":"MO(2)", "x":4, "y":3, "w":1.25}, {"x":5.25, "y":3, "w":2}, {"label":"MO(1)", "x":7.25, "y":3, "w":1.25}, {"label":"\u2190", "x":8.5, "y":3}, {"label":"\u2193", "x":9.5, "y":3}, {"label":"\u2191", "x":10.5, "y":3}, {"label":"\u2192", "x":11.5, "y":3}]
+    }
+  }
+}

keyboards/ut472/keymaps/default/config.h

@@ -0,0 +1,21 @@
+/* Copyright 2018 Carlos Filoteo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+// place overrides here

keyboards/ut472/keymaps/default/keymap.c

@@ -0,0 +1,100 @@
+/* Copyright 2018 Carlos Filoteo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define LT3_TAB LT(3, KC_TAB)
+
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Base Layer
+   * ,-------------------------------------------------------------------------.
+   * | Esc |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |Bspace |
+   * |-------------------------------------------------------------------------+
+   * |Tab/L3|  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |   '  |
+   * |-------------------------------------------------------------------------+
+   * | Shift |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |Sh/En|
+   * |-------------------------------------------------------------------------+
+   * | Ctrl| Alt | Gui | App |  L2  |   Space   |  L1  | Left| Down|  Up |Right|
+   * `-------------------------------------------------------------------------'
+   */
+
+LAYOUT(
+  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  LT3_TAB, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_SFTENT,
+  KC_LCTL, KC_LALT, KC_LGUI, KC_APP,  MO(2),      KC_SPC,        MO(1),  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+  /* FN Layer 1
+   * ,-------------------------------------------------------------------------.
+   * | ` ~ |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  | Delete|
+   * |-------------------------------------------------------------------------+
+   * |      |     |     |     |     |     |     |  -  |  =  |  [  |  ]  |  \   |
+   * |-------------------------------------------------------------------------+
+   * |       | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 |     |
+   * |-------------------------------------------------------------------------+
+   * |     |     |     |Capsl|      |          |       | Home| PgDn| PgUp| End |
+   * `-------------------------------------------------------------------------'
+   */
+
+LAYOUT( /* Right */
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELETE,
+  _______, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+  _______, KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  _______,
+  _______, _______, _______, KC_CAPS, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
+),
+
+  /* FN Layer 2
+   * ,-------------------------------------------------------------------------.
+   * |   ~  |  !  |  @  |  #  |  $  |  %  |  ^  |  &  |  *  |  (  |  )  |Delete|
+   * |-------------------------------------------------------------------------+
+   * |      |     |     |     |     |     |     |  _  |  +  |  { |  }  |   |   |
+   * |-------------------------------------------------------------------------+
+   * |       | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 |     |
+   * |-------------------------------------------------------------------------+
+   * |     |     |     |Capsl|      |          |       | Home| PgDn| PgUp| End |
+   * `-------------------------------------------------------------------------'
+   */
+
+LAYOUT( /* Left */
+  KC_TILDE,  KC_EXCLAIM,  KC_AT,  KC_HASH,  KC_DOLLAR, KC_PERCENT, KC_CIRCUMFLEX, KC_AMPERSAND, KC_ASTERISK, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_DELETE,
+  _______, _______, _______, _______, _______, _______, _______, KC_UNDERSCORE, KC_PLUS, KC_LEFT_CURLY_BRACE, KC_RIGHT_CURLY_BRACE, KC_PIPE,
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
+  _______, _______, _______, KC_CAPS, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
+),
+
+  /* FN Layer 2
+   * ,-------------------------------------------------------------------------.
+   * | Esc | Calc|Webhm| Mail| Comp|     |     |     |     |     |PrtSc|       |
+   * |-------------------------------------------------------------------------+
+   * |      |     |     |     |     |     |     |     |     |     |     |      |
+   * |-------------------------------------------------------------------------+
+   * |       |    |     |     |     |     |     |     |     |     |     |     |
+   * |-------------------------------------------------------------------------+
+   * |     |     |     |     |      |          |       |MousL|MousD|MousU|MousR|
+   * `-------------------------------------------------------------------------'
+   */
+
+LAYOUT( /* Tab */
+  KC_ESC,  KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______,     _______,      _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R
+),
+};

keyboards/ut472/keymaps/default/readme.md

@@ -0,0 +1,5 @@
+# UT47 default keymap
+
+![UT47 layout image](https://i.imgur.com/Tsz5qsF.png)
+
+[KLE](http://www.keyboard-layout-editor.com/##@@_y:0%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&_w:1.5%3B&=Back%20Space&_x:0.25&a:4&f:4&w:4&h:4&d:true%3B&=%3Cb%3EGNAP!%3C%2F%2Fb%3E%3Cp%3E%3Cp%3EMinimum%20stagger%3Cp%3E47%20key%20layout%3B&@_a:7&f:3&w:1.25%3B&=Tab&=A&=S&=D&=F&=G&=H&=J&=K&=L&=%2F%3B&_w:1.25%3B&=%27%3B&@_w:1.5%3B&=Shift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F%2F&=Return%3B&@=Ctrl&=Alt&=Super&=Menu&_w:1.25%3B&=%2F&dArr%2F%3B&_w:2%3B&=&_w:1.25%3B&=%2F&uArr%2F%3B&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&uarr%2F%3B&=%2F&rarr%2F%3B%3B&=undefined)

keyboards/ut472/readme.md

@@ -0,0 +1,20 @@
+# ut47.2
+
+Somewhere between ortholinear and standard offset. Created to have all the same functions on a Planck in a keyboard but with a more conventional keyboard row stagger.
+
+Keyboard Maintainer: [filoxo](https://github.com/filoxo), [network_operations](https://www.keyhive.xyz)
+
+The keyboard files can be found here: https://github.com/ai03-2725/UT47.2
+or purchased at keyhive.xyz
+
+## Instructions
+
+To create a hex file for the UT47.2, run:
+
+    make ut472:default
+
+## Layout
+
+Go to the [default layout README](keymaps/default/readme.md) for more information.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ut472/rules.mk

@@ -0,0 +1,69 @@
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+RGBLIGHT_ENABLE = yes

keyboards/ut472/ut472.c

@@ -0,0 +1,13 @@
+#include "ut472.h"
+
+void matrix_init_kb(void) {
+  // Keyboard start-up code goes here
+  // Runs once when the firmware starts up
+  matrix_init_user();
+};
+
+void matrix_scan_kb(void) {
+  // Looping keyboard code goes here
+  // This runs every cycle (a lot)
+  matrix_scan_user();
+};

keyboards/ut472/ut472.h

@@ -0,0 +1,34 @@
+/* Copyright 2018 Carlos Filoteo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+ #pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
+  K30, K31, K32, K33, K34,    K35,   K37, K38, K39, K3a, K3b  \
+) \
+  { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b }, \
+    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, K3a, K3b }  \
+  }
+
+

keyboards/whitefox/keymaps/konstantin/keymap.c

@@ -2,66 +2,66 @@
 #include "konstantin.h"
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Base layer
-   * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
-   * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │PSc│
-   * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
-   * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Bspc │Del│
-   * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
-   * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
-   * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-   * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RCtRSf│ ↑ │PgD│
-   * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
-   * │LCtl│LGui│LAlt│         Space          │RAlG│FnLk│ │ ← │ ↓ │ → │
-   * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
-   */
-  [L_BASE] = LAYOUT_truefox( \
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,  KC_PSCR, \
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL,  \
-    FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_PGUP, \
-    KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RCT_RSF,          KC_UP,   KC_PGDN, \
-    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    RAL_RGU, FN_FNLK,                   KC_LEFT, KC_DOWN, KC_RGHT  \
-  ),
+    /* Base layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+     * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │PSc│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Bspc │Del│
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RCtRSf│ ↑ │PgD│
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │LCtl│LGui│LAlt│         Space          │RAlG│FnLk│ │ ← │ ↓ │ → │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [L_BASE] = LAYOUT_truefox(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,  KC_PSCR,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL,
+        FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_PGUP,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RCT_RSF,          KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    RAL_RGU, FN_FNLK,                   KC_LEFT, KC_DOWN, KC_RGHT
+    ),
 
-  /* Function layer
-   * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
-   * │   │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│Num│SLk│Pau│
-   * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
-   * │ M4  │M2 │M↑ │M1 │M3 │M5 │   │UCM│   │Stp│Ply│Prv│Nxt│Clear│Ins│
-   * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
-   * │      │M← │M↓ │M→ │MW↑│   │   │   │   │   │   │   │        │Top│
-   * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-   * │        │MA0│MA2│MW←│MW→│   │   │   │Vo-│Vo+│Mut│ App  │PgU│Btm│
-   * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
-   * │    │DtPR│DtNA│          MW↓           │    │    │ │Hom│PgD│End│
-   * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
-   */
-  [L_FN] = LAYOUT_truefox( \
-    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  NUMPAD,  KC_SLCK, KC_PAUS, \
-    KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD,  _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, CLEAR,            KC_INS,  \
-    _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______,          _______,          TOP,     \
-    _______,          KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_APP,           KC_PGUP, BOTTOM,  \
-    _______, DST_P_R, DST_N_A,                            KC_WH_D,                   _______, _______,                   KC_HOME, KC_PGDN, KC_END   \
-  ),
+    /* Function layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+     * │   │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│Num│SLk│Pau│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
+     * │ M4  │M2 │M↑ │M1 │M3 │M5 │   │UCM│   │Stp│Ply│Prv│Nxt│Clear│Ins│
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │      │M← │M↓ │M→ │MW↑│   │   │   │   │   │   │   │        │Top│
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │        │MA0│MA2│MW←│MW→│   │   │   │Vo-│Vo+│Mut│ App  │PgU│Btm│
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │    │DtPR│DtNA│          MW↓           │    │    │ │Hom│PgD│End│
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [L_FN] = LAYOUT_truefox(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  NUMPAD,  KC_SLCK, KC_PAUS,
+        KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD,  _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, CLEAR,            KC_INS,
+        _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______,          _______,          TOP,
+        _______,          KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_APP,           KC_PGUP, BOTTOM,
+        _______, DST_P_R, DST_N_A,                            KC_WH_D,                   _______, _______,                   KC_HOME, KC_PGDN, KC_END
+    ),
 
-  /* Numpad layer
-   * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
-   * │   │   │   │   │   │   │   │P7 │P8 │P9 │P- │ − │ = │Num│   │   │
-   * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
-   * │     │   │   │   │   │   │   │P4 │P5 │P6 │P+ │ ( │ ) │     │   │
-   * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
-   * │      │   │   │   │   │   │   │P1 │P2 │P3 │P* │ × │ PEnter │   │
-   * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-   * │        │   │   │   │   │   │P0 │P0 │ , │P. │P/ │  ÷   │   │   │
-   * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
-   * │    │    │    │                        │    │    │ │   │   │   │
-   * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
-   */
-  [L_NUMPAD] = LAYOUT_truefox( \
-    _______, _______, _______, _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   KC_PMNS, MINUS,   EQUALS,  NUMPAD,  _______, _______, \
-    _______, _______, _______, _______, _______, _______, _______, KC_P4,   KC_P5,   KC_P6,   KC_PPLS, L_PAREN, R_PAREN, _______,          _______, \
-    _______, _______, _______, _______, _______, _______, _______, KC_P1,   KC_P2,   KC_P3,   KC_PAST, TIMES,            KC_PENT,          _______, \
-    _______,          _______, _______, _______, _______, _______, KC_P0,   KC_P0,   COMMA,   KC_PDOT, KC_PSLS, DIVIDE,           _______, _______, \
-    _______, _______, _______,                            _______,                   _______, _______,                   _______, _______, _______  \
-  ),
+    /* Numpad layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+     * │   │   │   │   │   │   │   │P7 │P8 │P9 │P- │ − │ = │Num│   │   │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
+     * │     │   │   │   │   │   │   │P4 │P5 │P6 │P+ │ ( │ ) │     │   │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │      │   │   │   │   │   │   │P1 │P2 │P3 │P* │ × │ PEnter │   │
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │        │   │   │   │   │   │P0 │P0 │ , │P. │P/ │  ÷   │   │   │
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │    │    │    │                        │    │    │ │   │   │   │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [L_NUMPAD] = LAYOUT_truefox(
+        _______, _______, _______, _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   KC_PMNS, MINUS,   EQUALS,  NUMPAD,  _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, KC_P4,   KC_P5,   KC_P6,   KC_PPLS, L_PAREN, R_PAREN, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, KC_P1,   KC_P2,   KC_P3,   KC_PAST, TIMES,            KC_PENT,          _______,
+        _______,          _______, _______, _______, _______, _______, KC_P0,   KC_P0,   COMMA,   KC_PDOT, KC_PSLS, DIVIDE,           _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,                   _______, _______, _______
+    ),
 };

keyboards/zen/rev2/config.h

@@ -65,6 +65,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGBLED_NUM 34    // Number of LEDs
+#define RGBLIGHT_ANIMATIONS
 
 /*
  * Feature disable options

keyboards/zen/rev2/rev2.c

@@ -24,7 +24,7 @@ const char* layer_name_user(uint32_t layer) {
 
 __attribute__((weak))
 void render_status(void) {
-  // Setup for 90 degree rendering because it's awesome!
+  // Setup for 270 degree rendering because it's awesome!
   // It can house 16 lines of text, with 5 letters each line
   // Render to mode icon
   static const char PROGMEM mode_logo[2][4] = {
@@ -49,7 +49,7 @@ void render_status(void) {
 
 oled_rotation_t oled_init_user(oled_rotation_t rotation) {
   if (is_keyboard_master())
-    return OLED_ROTATION_90;  // flips the display 90 degrees if mainhand
+    return OLED_ROTATION_270;  // flips the display 270 degrees if mainhand
   return rotation;
 }
 

message.mk

@@ -81,3 +81,7 @@ MSG_FILE_TOO_BIG = $(ERROR_COLOR)The firmware is too large!$(NO_COLOR) $(CURRENT
 MSG_FILE_TOO_SMALL = The firmware is too small! $(CURRENT_SIZE)/$(MAX_SIZE)\n
 MSG_FILE_JUST_RIGHT = The firmware size is fine - $(CURRENT_SIZE)/$(MAX_SIZE) ($(FREE_SIZE) bytes free)\n
 MSG_FILE_NEAR_LIMIT = The firmware size is approaching the maximum - $(CURRENT_SIZE)/$(MAX_SIZE) ($(FREE_SIZE) bytes free)\n
+MSG_PYTHON_MISSING = $(WARN_COLOR)WARNING:$(NO_COLOR)\n \
+	Python 3 is not installed. It will be required by a future version\n\
+	of qmk_firmware.\n\n\
+	Please run $(BOLD)util/qmk_install.sh$(NO_COLOR) to install all the dependencies QMK requires.\n\n

quantum/audio/audio.h

@@ -13,8 +13,8 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef AUDIO_H
-#define AUDIO_H
+
+#pragma once
 
 #include <stdint.h>
 #include <stdbool.h>
@@ -27,6 +27,9 @@
 #include "voices.h"
 #include "quantum.h"
 #include <math.h>
+#if defined(PROTOCOL_CHIBIOS)
+  #include "audio_arm.h"
+#endif
 
 // Largely untested PWM audio mode (doesn't sound as good)
 // #define PWM_AUDIO
@@ -107,6 +110,5 @@ void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat);
 #define PLAY_SONG(note_array) play_notes(&note_array, NOTE_ARRAY_SIZE((note_array)), false)
 #define PLAY_LOOP(note_array) play_notes(&note_array, NOTE_ARRAY_SIZE((note_array)), true)
 
+bool is_playing_note(void);
 bool is_playing_notes(void);
-
-#endif

quantum/audio/audio_arm.c

@@ -1,4 +1,4 @@
-/* Copyright 2016 Jack Humbert
+/* Copyright 2016-2019 Jack Humbert
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,21 +26,8 @@
 
 // -----------------------------------------------------------------------------
 
-int voices = 0;
-int voice_place = 0;
-float frequency = 0;
-float frequency_alt = 0;
-int volume = 0;
-long position = 0;
-
-float frequencies[8] = {0, 0, 0, 0, 0, 0, 0, 0};
-int volumes[8] = {0, 0, 0, 0, 0, 0, 0, 0};
-bool sliding = false;
-
-float place = 0;
-
-uint8_t * sample;
-uint16_t sample_length = 0;
+uint8_t dac_voices = 0;
+float dac_frequencies[8] = { 0.0 };
 
 bool     playing_notes = false;
 bool     playing_note = false;
@@ -48,14 +35,12 @@ float    note_frequency = 0;
 float    note_length = 0;
 uint8_t  note_tempo = TEMPO_DEFAULT;
 float    note_timbre = TIMBRE_DEFAULT;
-uint16_t note_position = 0;
+uint32_t note_position = 0;
 float (* notes_pointer)[][2];
 uint16_t notes_count;
 bool     notes_repeat;
-bool     note_resting = false;
 
 uint16_t current_note = 0;
-uint8_t rest_counter = 0;
 
 #ifdef VIBRATO_ENABLE
 float vibrato_counter = 0;
@@ -77,200 +62,198 @@ bool glissando = true;
 #endif
 float startup_song[][2] = STARTUP_SONG;
 
-static void gpt_cb8(GPTDriver *gptp);
-
-#define DAC_BUFFER_SIZE 100
-#ifndef DAC_SAMPLE_MAX
-#define DAC_SAMPLE_MAX  65535U
-#endif
-
-#define START_CHANNEL_1() gptStart(&GPTD6, &gpt6cfg1); \
-    gptStartContinuous(&GPTD6, 2U)
-#define START_CHANNEL_2() gptStart(&GPTD7, &gpt7cfg1); \
-    gptStartContinuous(&GPTD7, 2U)
-#define STOP_CHANNEL_1() gptStopTimer(&GPTD6)
-#define STOP_CHANNEL_2() gptStopTimer(&GPTD7)
-#define RESTART_CHANNEL_1() STOP_CHANNEL_1(); \
-    START_CHANNEL_1()
-#define RESTART_CHANNEL_2() STOP_CHANNEL_2(); \
-    START_CHANNEL_2()
-#define UPDATE_CHANNEL_1_FREQ(freq) gpt6cfg1.frequency = freq * DAC_BUFFER_SIZE; \
-    RESTART_CHANNEL_1()
-#define UPDATE_CHANNEL_2_FREQ(freq) gpt7cfg1.frequency = freq * DAC_BUFFER_SIZE; \
-    RESTART_CHANNEL_2()
-#define GET_CHANNEL_1_FREQ (uint16_t)(gpt6cfg1.frequency * DAC_BUFFER_SIZE)
-#define GET_CHANNEL_2_FREQ (uint16_t)(gpt7cfg1.frequency * DAC_BUFFER_SIZE)
-
-
-/*
- * GPT6 configuration.
- */
-// static const GPTConfig gpt6cfg1 = {
-//   .frequency    = 1000000U,
-//   .callback     = NULL,
-//   .cr2          = TIM_CR2_MMS_1,    /* MMS = 010 = TRGO on Update Event.    */
-//   .dier         = 0U
-// };
-
-GPTConfig gpt6cfg1 = {
-  .frequency    = 440U*DAC_BUFFER_SIZE,
-  .callback     = NULL,
-  .cr2          = TIM_CR2_MMS_1,    /* MMS = 010 = TRGO on Update Event.    */
-  .dier         = 0U
+static const dacsample_t dac_buffer_sine[DAC_BUFFER_SIZE] = {
+  // 256 values, max 4095
+  0x800,0x832,0x864,0x896,0x8c8,0x8fa,0x92c,0x95e,
+  0x98f,0x9c0,0x9f1,0xa22,0xa52,0xa82,0xab1,0xae0,
+  0xb0f,0xb3d,0xb6b,0xb98,0xbc5,0xbf1,0xc1c,0xc47,
+  0xc71,0xc9a,0xcc3,0xceb,0xd12,0xd39,0xd5f,0xd83,
+  0xda7,0xdca,0xded,0xe0e,0xe2e,0xe4e,0xe6c,0xe8a,
+  0xea6,0xec1,0xedc,0xef5,0xf0d,0xf24,0xf3a,0xf4f,
+  0xf63,0xf76,0xf87,0xf98,0xfa7,0xfb5,0xfc2,0xfcd,
+  0xfd8,0xfe1,0xfe9,0xff0,0xff5,0xff9,0xffd,0xffe,
+  0xfff,0xffe,0xffd,0xff9,0xff5,0xff0,0xfe9,0xfe1,
+  0xfd8,0xfcd,0xfc2,0xfb5,0xfa7,0xf98,0xf87,0xf76,
+  0xf63,0xf4f,0xf3a,0xf24,0xf0d,0xef5,0xedc,0xec1,
+  0xea6,0xe8a,0xe6c,0xe4e,0xe2e,0xe0e,0xded,0xdca,
+  0xda7,0xd83,0xd5f,0xd39,0xd12,0xceb,0xcc3,0xc9a,
+  0xc71,0xc47,0xc1c,0xbf1,0xbc5,0xb98,0xb6b,0xb3d,
+  0xb0f,0xae0,0xab1,0xa82,0xa52,0xa22,0x9f1,0x9c0,
+  0x98f,0x95e,0x92c,0x8fa,0x8c8,0x896,0x864,0x832,
+  0x800,0x7cd,0x79b,0x769,0x737,0x705,0x6d3,0x6a1,
+  0x670,0x63f,0x60e,0x5dd,0x5ad,0x57d,0x54e,0x51f,
+  0x4f0,0x4c2,0x494,0x467,0x43a,0x40e,0x3e3,0x3b8,
+  0x38e,0x365,0x33c,0x314,0x2ed,0x2c6,0x2a0,0x27c,
+  0x258,0x235,0x212,0x1f1,0x1d1,0x1b1,0x193,0x175,
+  0x159,0x13e,0x123,0x10a,0xf2, 0xdb, 0xc5, 0xb0,
+  0x9c, 0x89, 0x78, 0x67, 0x58, 0x4a, 0x3d, 0x32,
+  0x27, 0x1e, 0x16, 0xf,  0xa,  0x6,  0x2,  0x1,
+  0x0,  0x1,  0x2,  0x6,  0xa,  0xf,  0x16, 0x1e,
+  0x27, 0x32, 0x3d, 0x4a, 0x58, 0x67, 0x78, 0x89,
+  0x9c, 0xb0, 0xc5, 0xdb, 0xf2, 0x10a,0x123,0x13e,
+  0x159,0x175,0x193,0x1b1,0x1d1,0x1f1,0x212,0x235,
+  0x258,0x27c,0x2a0,0x2c6,0x2ed,0x314,0x33c,0x365,
+  0x38e,0x3b8,0x3e3,0x40e,0x43a,0x467,0x494,0x4c2,
+  0x4f0,0x51f,0x54e,0x57d,0x5ad,0x5dd,0x60e,0x63f,
+  0x670,0x6a1,0x6d3,0x705,0x737,0x769,0x79b,0x7cd
 };
 
-GPTConfig gpt7cfg1 = {
-  .frequency    = 440U*DAC_BUFFER_SIZE,
-  .callback     = NULL,
-  .cr2          = TIM_CR2_MMS_1,    /* MMS = 010 = TRGO on Update Event.    */
-  .dier         = 0U
+static const dacsample_t dac_buffer_triangle[DAC_BUFFER_SIZE] = {
+  // 256 values, max 4095
+  0x20, 0x40, 0x60, 0x80, 0xa0, 0xc0, 0xe0, 0x100,
+  0x120,0x140,0x160,0x180,0x1a0,0x1c0,0x1e0,0x200,
+  0x220,0x240,0x260,0x280,0x2a0,0x2c0,0x2e0,0x300,
+  0x320,0x340,0x360,0x380,0x3a0,0x3c0,0x3e0,0x400,
+  0x420,0x440,0x460,0x480,0x4a0,0x4c0,0x4e0,0x500,
+  0x520,0x540,0x560,0x580,0x5a0,0x5c0,0x5e0,0x600,
+  0x620,0x640,0x660,0x680,0x6a0,0x6c0,0x6e0,0x700,
+  0x720,0x740,0x760,0x780,0x7a0,0x7c0,0x7e0,0x800,
+  0x81f,0x83f,0x85f,0x87f,0x89f,0x8bf,0x8df,0x8ff,
+  0x91f,0x93f,0x95f,0x97f,0x99f,0x9bf,0x9df,0x9ff,
+  0xa1f,0xa3f,0xa5f,0xa7f,0xa9f,0xabf,0xadf,0xaff,
+  0xb1f,0xb3f,0xb5f,0xb7f,0xb9f,0xbbf,0xbdf,0xbff,
+  0xc1f,0xc3f,0xc5f,0xc7f,0xc9f,0xcbf,0xcdf,0xcff,
+  0xd1f,0xd3f,0xd5f,0xd7f,0xd9f,0xdbf,0xddf,0xdff,
+  0xe1f,0xe3f,0xe5f,0xe7f,0xe9f,0xebf,0xedf,0xeff,
+  0xf1f,0xf3f,0xf5f,0xf7f,0xf9f,0xfbf,0xfdf,0xfff,
+  0xfdf,0xfbf,0xf9f,0xf7f,0xf5f,0xf3f,0xf1f,0xeff,
+  0xedf,0xebf,0xe9f,0xe7f,0xe5f,0xe3f,0xe1f,0xdff,
+  0xddf,0xdbf,0xd9f,0xd7f,0xd5f,0xd3f,0xd1f,0xcff,
+  0xcdf,0xcbf,0xc9f,0xc7f,0xc5f,0xc3f,0xc1f,0xbff,
+  0xbdf,0xbbf,0xb9f,0xb7f,0xb5f,0xb3f,0xb1f,0xaff,
+  0xadf,0xabf,0xa9f,0xa7f,0xa5f,0xa3f,0xa1f,0x9ff,
+  0x9df,0x9bf,0x99f,0x97f,0x95f,0x93f,0x91f,0x8ff,
+  0x8df,0x8bf,0x89f,0x87f,0x85f,0x83f,0x81f,0x800,
+  0x7e0,0x7c0,0x7a0,0x780,0x760,0x740,0x720,0x700,
+  0x6e0,0x6c0,0x6a0,0x680,0x660,0x640,0x620,0x600,
+  0x5e0,0x5c0,0x5a0,0x580,0x560,0x540,0x520,0x500,
+  0x4e0,0x4c0,0x4a0,0x480,0x460,0x440,0x420,0x400,
+  0x3e0,0x3c0,0x3a0,0x380,0x360,0x340,0x320,0x300,
+  0x2e0,0x2c0,0x2a0,0x280,0x260,0x240,0x220,0x200,
+  0x1e0,0x1c0,0x1a0,0x180,0x160,0x140,0x120,0x100,
+  0xe0, 0xc0, 0xa0, 0x80, 0x60, 0x40, 0x20, 0x0
 };
 
-GPTConfig gpt8cfg1 = {
-  .frequency    = 10,
-  .callback     = gpt_cb8,
-  .cr2          = TIM_CR2_MMS_1,    /* MMS = 010 = TRGO on Update Event.    */
-  .dier         = 0U
-};
-
-
-/*
- * DAC test buffer (sine wave).
- */
-// static const dacsample_t dac_buffer[DAC_BUFFER_SIZE] = {
-//   2047, 2082, 2118, 2154, 2189, 2225, 2260, 2296, 2331, 2367, 2402, 2437,
-//   2472, 2507, 2542, 2576, 2611, 2645, 2679, 2713, 2747, 2780, 2813, 2846,
-//   2879, 2912, 2944, 2976, 3008, 3039, 3070, 3101, 3131, 3161, 3191, 3221,
-//   3250, 3278, 3307, 3335, 3362, 3389, 3416, 3443, 3468, 3494, 3519, 3544,
-//   3568, 3591, 3615, 3637, 3660, 3681, 3703, 3723, 3744, 3763, 3782, 3801,
-//   3819, 3837, 3854, 3870, 3886, 3902, 3917, 3931, 3944, 3958, 3970, 3982,
-//   3993, 4004, 4014, 4024, 4033, 4041, 4049, 4056, 4062, 4068, 4074, 4078,
-//   4082, 4086, 4089, 4091, 4092, 4093, 4094, 4093, 4092, 4091, 4089, 4086,
-//   4082, 4078, 4074, 4068, 4062, 4056, 4049, 4041, 4033, 4024, 4014, 4004,
-//   3993, 3982, 3970, 3958, 3944, 3931, 3917, 3902, 3886, 3870, 3854, 3837,
-//   3819, 3801, 3782, 3763, 3744, 3723, 3703, 3681, 3660, 3637, 3615, 3591,
-//   3568, 3544, 3519, 3494, 3468, 3443, 3416, 3389, 3362, 3335, 3307, 3278,
-//   3250, 3221, 3191, 3161, 3131, 3101, 3070, 3039, 3008, 2976, 2944, 2912,
-//   2879, 2846, 2813, 2780, 2747, 2713, 2679, 2645, 2611, 2576, 2542, 2507,
-//   2472, 2437, 2402, 2367, 2331, 2296, 2260, 2225, 2189, 2154, 2118, 2082,
-//   2047, 2012, 1976, 1940, 1905, 1869, 1834, 1798, 1763, 1727, 1692, 1657,
-//   1622, 1587, 1552, 1518, 1483, 1449, 1415, 1381, 1347, 1314, 1281, 1248,
-//   1215, 1182, 1150, 1118, 1086, 1055, 1024,  993,  963,  933,  903,  873,
-//    844,  816,  787,  759,  732,  705,  678,  651,  626,  600,  575,  550,
-//    526,  503,  479,  457,  434,  413,  391,  371,  350,  331,  312,  293,
-//    275,  257,  240,  224,  208,  192,  177,  163,  150,  136,  124,  112,
-//    101,   90,   80,   70,   61,   53,   45,   38,   32,   26,   20,   16,
-//     12,    8,    5,    3,    2,    1,    0,    1,    2,    3,    5,    8,
-//     12,   16,   20,   26,   32,   38,   45,   53,   61,   70,   80,   90,
-//    101,  112,  124,  136,  150,  163,  177,  192,  208,  224,  240,  257,
-//    275,  293,  312,  331,  350,  371,  391,  413,  434,  457,  479,  503,
-//    526,  550,  575,  600,  626,  651,  678,  705,  732,  759,  787,  816,
-//    844,  873,  903,  933,  963,  993, 1024, 1055, 1086, 1118, 1150, 1182,
-//   1215, 1248, 1281, 1314, 1347, 1381, 1415, 1449, 1483, 1518, 1552, 1587,
-//   1622, 1657, 1692, 1727, 1763, 1798, 1834, 1869, 1905, 1940, 1976, 2012
-// };
-
-// static const dacsample_t dac_buffer_2[DAC_BUFFER_SIZE] = {
-//     12,    8,    5,    3,    2,    1,    0,    1,    2,    3,    5,    8,
-//     12,   16,   20,   26,   32,   38,   45,   53,   61,   70,   80,   90,
-//    101,  112,  124,  136,  150,  163,  177,  192,  208,  224,  240,  257,
-//    275,  293,  312,  331,  350,  371,  391,  413,  434,  457,  479,  503,
-//    526,  550,  575,  600,  626,  651,  678,  705,  732,  759,  787,  816,
-//    844,  873,  903,  933,  963,  993, 1024, 1055, 1086, 1118, 1150, 1182,
-//   1215, 1248, 1281, 1314, 1347, 1381, 1415, 1449, 1483, 1518, 1552, 1587,
-//   1622, 1657, 1692, 1727, 1763, 1798, 1834, 1869, 1905, 1940, 1976, 2012,
-//   2047, 2082, 2118, 2154, 2189, 2225, 2260, 2296, 2331, 2367, 2402, 2437,
-//   2472, 2507, 2542, 2576, 2611, 2645, 2679, 2713, 2747, 2780, 2813, 2846,
-//   2879, 2912, 2944, 2976, 3008, 3039, 3070, 3101, 3131, 3161, 3191, 3221,
-//   3250, 3278, 3307, 3335, 3362, 3389, 3416, 3443, 3468, 3494, 3519, 3544,
-//   3568, 3591, 3615, 3637, 3660, 3681, 3703, 3723, 3744, 3763, 3782, 3801,
-//   3819, 3837, 3854, 3870, 3886, 3902, 3917, 3931, 3944, 3958, 3970, 3982,
-//   3993, 4004, 4014, 4024, 4033, 4041, 4049, 4056, 4062, 4068, 4074, 4078,
-//   4082, 4086, 4089, 4091, 4092, 4093, 4094, 4093, 4092, 4091, 4089, 4086,
-//   4082, 4078, 4074, 4068, 4062, 4056, 4049, 4041, 4033, 4024, 4014, 4004,
-//   3993, 3982, 3970, 3958, 3944, 3931, 3917, 3902, 3886, 3870, 3854, 3837,
-//   3819, 3801, 3782, 3763, 3744, 3723, 3703, 3681, 3660, 3637, 3615, 3591,
-//   3568, 3544, 3519, 3494, 3468, 3443, 3416, 3389, 3362, 3335, 3307, 3278,
-//   3250, 3221, 3191, 3161, 3131, 3101, 3070, 3039, 3008, 2976, 2944, 2912,
-//   2879, 2846, 2813, 2780, 2747, 2713, 2679, 2645, 2611, 2576, 2542, 2507,
-//   2472, 2437, 2402, 2367, 2331, 2296, 2260, 2225, 2189, 2154, 2118, 2082,
-//   2047, 2012, 1976, 1940, 1905, 1869, 1834, 1798, 1763, 1727, 1692, 1657,
-//   1622, 1587, 1552, 1518, 1483, 1449, 1415, 1381, 1347, 1314, 1281, 1248,
-//   1215, 1182, 1150, 1118, 1086, 1055, 1024,  993,  963,  933,  903,  873,
-//    844,  816,  787,  759,  732,  705,  678,  651,  626,  600,  575,  550,
-//    526,  503,  479,  457,  434,  413,  391,  371,  350,  331,  312,  293,
-//    275,  257,  240,  224,  208,  192,  177,  163,  150,  136,  124,  112,
-//    101,   90,   80,   70,   61,   53,   45,   38,   32,   26,   20,   16
-// };
-
-// squarewave
-static const dacsample_t dac_buffer[DAC_BUFFER_SIZE] = {
+static const dacsample_t dac_buffer_square[DAC_BUFFER_SIZE] = {
   // First half is max, second half is 0
   [0                 ... DAC_BUFFER_SIZE/2-1] = DAC_SAMPLE_MAX,
   [DAC_BUFFER_SIZE/2 ... DAC_BUFFER_SIZE  -1] = 0,
 };
 
-// squarewave
-static const dacsample_t dac_buffer_2[DAC_BUFFER_SIZE] = {
-  // opposite of dac_buffer above
-  [0                 ... DAC_BUFFER_SIZE/2-1] = 0,
-  [DAC_BUFFER_SIZE/2 ... DAC_BUFFER_SIZE  -1] = DAC_SAMPLE_MAX,
-};
+static dacsample_t dac_buffer_empty[DAC_BUFFER_SIZE] = { DAC_OFF_VALUE };
 
-/*
- * DAC streaming callback.
+static float dac_if[8] = {0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0};
+
+/**
+ * Generation of the waveform being passed to the callback. Declared weak so users
+ * can override it with their own waveforms/noises.
  */
-size_t nx = 0, ny = 0, nz = 0;
-static void end_cb1(DACDriver *dacp, dacsample_t *buffer, size_t n) {
+__attribute__ ((weak))
+uint16_t dac_value_generate(void) {
+  uint16_t value = DAC_OFF_VALUE;
+  uint8_t working_voices = dac_voices;
+  if (working_voices > DAC_VOICES_MAX)
+    working_voices = DAC_VOICES_MAX;
+
+  if (working_voices > 0) {
+    uint16_t value_avg = 0;
+    for (uint8_t i = 0; i < working_voices; i++) {
+      dac_if[i] = dac_if[i] + ((dac_frequencies[i] * DAC_BUFFER_SIZE) / DAC_SAMPLE_RATE);
+
+      // Needed because % doesn't work with floats
+      while (dac_if[i] >= (DAC_BUFFER_SIZE))
+        dac_if[i] = dac_if[i] - DAC_BUFFER_SIZE;
+
+      // Wavetable generation/lookup
+      uint16_t dac_i = (uint16_t)dac_if[i];
+      // SINE
+      value_avg += dac_buffer_sine[dac_i] / working_voices / 3;
+      // TRIANGLE
+      value_avg += dac_buffer_triangle[dac_i] / working_voices / 3;
+      // SQUARE
+      value_avg += dac_buffer_square[dac_i] / working_voices / 3;
+    }
+    value = value_avg;
+  }
+  return value;
+}
+
+/**
+ * DAC streaming callback. Does all of the main computing for playing songs.
+ */
+static void dac_end(DACDriver * dacp, dacsample_t * sample_p, size_t sample_count) {
 
   (void)dacp;
 
-  nz++;
-  if (dac_buffer == buffer) {
-    nx += n;
-  }
-  else {
-    ny += n;
+  for (uint8_t s = 0; s < sample_count; s++) {
+    sample_p[s] = dac_value_generate();
   }
 
-  if ((nz % 1000) == 0) {
-    // palTogglePad(GPIOD, GPIOD_LED3);
+  if (playing_notes) {
+    note_position += sample_count;
+
+    // End of the note - 35 is arbitary here, but gets us close to AVR's timing
+    if ((note_position >= (note_length*DAC_SAMPLE_RATE/35))) {
+      stop_note((*notes_pointer)[current_note][0]);
+      current_note++;
+      if (current_note >= notes_count) {
+        if (notes_repeat) {
+          current_note = 0;
+        } else {
+          playing_notes = false;
+          return;
+        }
+      }
+      play_note((*notes_pointer)[current_note][0], 15);
+      envelope_index = 0;
+      note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100);
+
+      // Skip forward in the next note's length if we've over shot the last, so
+      // the overall length of the song is the same
+      note_position = note_position - (note_length*DAC_SAMPLE_RATE/35);
+    }
   }
 }
 
-/*
- * DAC error callback.
- */
-static void error_cb1(DACDriver *dacp, dacerror_t err) {
+static void dac_error(DACDriver *dacp, dacerror_t err) {
 
   (void)dacp;
   (void)err;
 
-  chSysHalt("DAC failure");
+  chSysHalt("DAC failure. halp");
 }
 
-static const DACConfig dac1cfg1 = {
+static const GPTConfig gpt6cfg1 = {
+  .frequency    = DAC_SAMPLE_RATE * 3,
+  .callback     = NULL,
+  .cr2          = TIM_CR2_MMS_1,       /* MMS = 010 = TRGO on Update Event.  */
+  .dier         = 0U
+};
+
+static const DACConfig dac_conf = {
   .init         = DAC_SAMPLE_MAX,
   .datamode     = DAC_DHRM_12BIT_RIGHT
 };
 
-static const DACConversionGroup dacgrpcfg1 = {
+/**
+ * @note The DAC_TRG(0) here selects the Timer 6 TRGO event, which is triggered
+ * on the rising edge after 3 APB1 clock cycles, causing our gpt6cfg1.frequency
+ * to be a third of what we expect.
+ *
+ * Here are all the values for DAC_TRG (TSEL in the ref manual)
+ * TIM15_TRGO 0b011
+ * TIM2_TRGO  0b100
+ * TIM3_TRGO  0b001
+ * TIM6_TRGO  0b000
+ * TIM7_TRGO  0b010
+ * EXTI9      0b110
+ * SWTRIG     0b111
+ */
+static const DACConversionGroup dac_conv_cfg = {
   .num_channels = 1U,
-  .end_cb       = end_cb1,
-  .error_cb     = error_cb1,
-  .trigger      = DAC_TRG(0)
-};
-
-static const DACConfig dac1cfg2 = {
-  .init         = DAC_SAMPLE_MAX,
-  .datamode     = DAC_DHRM_12BIT_RIGHT
-};
-
-static const DACConversionGroup dacgrpcfg2 = {
-  .num_channels = 1U,
-  .end_cb       = end_cb1,
-  .error_cb     = error_cb1,
-  .trigger      = DAC_TRG(0)
+  .end_cb       = dac_end,
+  .error_cb     = dac_error,
+  .trigger      = DAC_TRG(0b000)
 };
 
 void audio_init() {
@@ -292,26 +275,20 @@ void audio_init() {
   #endif
 #endif // ARM EEPROM
 
-  /*
-   * Starting DAC1 driver, setting up the output pin as analog as suggested
-   * by the Reference Manual.
-   */
-  palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG);
-  palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG);
-  dacStart(&DACD1, &dac1cfg1);
-  dacStart(&DACD2, &dac1cfg2);
 
-  /*
-   * Starting GPT6/7 driver, it is used for triggering the DAC.
-   */
-  START_CHANNEL_1();
-  START_CHANNEL_2();
+#if defined(A4_AUDIO)
+  palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG );
+  dacStart(&DACD1, &dac_conf);
+  dacStartConversion(&DACD1, &dac_conv_cfg, dac_buffer_empty, DAC_BUFFER_SIZE);
+#endif
+#if defined(A5_AUDIO)
+  palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG );
+  dacStart(&DACD2, &dac_conf);
+  dacStartConversion(&DACD2, &dac_conv_cfg, dac_buffer_empty, DAC_BUFFER_SIZE);
+#endif
 
-  /*
-   * Starting a continuous conversion.
-   */
-  dacStartConversion(&DACD1, &dacgrpcfg1, (dacsample_t *)dac_buffer, DAC_BUFFER_SIZE);
-  dacStartConversion(&DACD2, &dacgrpcfg2, (dacsample_t *)dac_buffer_2, DAC_BUFFER_SIZE);
+  gptStart(&GPTD6, &gpt6cfg1);
+  gptStartContinuous(&GPTD6, 2U);
 
   audio_initialized = true;
 
@@ -329,22 +306,13 @@ void stop_all_notes() {
     if (!audio_initialized) {
         audio_init();
     }
-    voices = 0;
-
-    gptStopTimer(&GPTD6);
-    gptStopTimer(&GPTD7);
-    gptStopTimer(&GPTD8);
+    dac_voices = 0;
 
     playing_notes = false;
     playing_note = false;
-    frequency = 0;
-    frequency_alt = 0;
-    volume = 0;
 
-    for (uint8_t i = 0; i < 8; i++)
-    {
-        frequencies[i] = 0;
-        volumes[i] = 0;
+    for (uint8_t i = 0; i < 8; i++) {
+        dac_frequencies[i] = 0;
     }
 }
 
@@ -356,32 +324,20 @@ void stop_note(float freq) {
       audio_init();
     }
     for (int i = 7; i >= 0; i--) {
-      if (frequencies[i] == freq) {
-        frequencies[i] = 0;
-        volumes[i] = 0;
+      if (dac_frequencies[i] == freq) {
+        dac_frequencies[i] = 0;
         for (int j = i; (j < 7); j++) {
-          frequencies[j] = frequencies[j+1];
-          frequencies[j+1] = 0;
-          volumes[j] = volumes[j+1];
-          volumes[j+1] = 0;
+          dac_frequencies[j] = dac_frequencies[j+1];
+          dac_frequencies[j+1] = 0;
         }
         break;
       }
     }
-    voices--;
-    if (voices < 0) {
-      voices = 0;
+    dac_voices--;
+    if (dac_voices < 0) {
+      dac_voices = 0;
     }
-    if (voice_place >= voices) {
-      voice_place = 0;
-    }
-    if (voices == 0) {
-      STOP_CHANNEL_1();
-      STOP_CHANNEL_2();
-      gptStopTimer(&GPTD8);
-      frequency = 0;
-      frequency_alt = 0;
-      volume = 0;
+    if (dac_voices == 0) {
       playing_note = false;
     }
   }
@@ -406,196 +362,6 @@ float vibrato(float average_freq) {
 
 #endif
 
-static void gpt_cb8(GPTDriver *gptp) {
-  float freq;
-
-  if (playing_note) {
-    if (voices > 0) {
-
-      float freq_alt = 0;
-      if (voices > 1) {
-        if (polyphony_rate == 0) {
-          if (glissando) {
-            if (frequency_alt != 0 && frequency_alt < frequencies[voices - 2] && frequency_alt < frequencies[voices - 2] * pow(2, -440/frequencies[voices - 2]/12/2)) {
-              frequency_alt = frequency_alt * pow(2, 440/frequency_alt/12/2);
-            } else if (frequency_alt != 0 && frequency_alt > frequencies[voices - 2] && frequency_alt > frequencies[voices - 2] * pow(2, 440/frequencies[voices - 2]/12/2)) {
-              frequency_alt = frequency_alt * pow(2, -440/frequency_alt/12/2);
-            } else {
-              frequency_alt = frequencies[voices - 2];
-            }
-          } else {
-            frequency_alt = frequencies[voices - 2];
-          }
-
-          #ifdef VIBRATO_ENABLE
-            if (vibrato_strength > 0) {
-              freq_alt = vibrato(frequency_alt);
-            } else {
-              freq_alt = frequency_alt;
-            }
-          #else
-            freq_alt = frequency_alt;
-          #endif
-        }
-
-        if (envelope_index < 65535) {
-          envelope_index++;
-        }
-
-        freq_alt = voice_envelope(freq_alt);
-
-        if (freq_alt < 30.517578125) {
-          freq_alt = 30.52;
-        }
-
-        if (GET_CHANNEL_2_FREQ != (uint16_t)freq_alt) {
-          UPDATE_CHANNEL_2_FREQ(freq_alt);
-        } else {
-          RESTART_CHANNEL_2();
-        }
-        //note_timbre;
-      }
-
-      if (polyphony_rate > 0) {
-        if (voices > 1) {
-          voice_place %= voices;
-          if (place++ > (frequencies[voice_place] / polyphony_rate)) {
-            voice_place = (voice_place + 1) % voices;
-            place = 0.0;
-          }
-        }
-
-        #ifdef VIBRATO_ENABLE
-          if (vibrato_strength > 0) {
-              freq = vibrato(frequencies[voice_place]);
-          } else {
-              freq = frequencies[voice_place];
-          }
-        #else
-          freq = frequencies[voice_place];
-        #endif
-      } else {
-        if (glissando) {
-          if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440/frequencies[voices - 1]/12/2)) {
-            frequency = frequency * pow(2, 440/frequency/12/2);
-          } else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440/frequencies[voices - 1]/12/2)) {
-            frequency = frequency * pow(2, -440/frequency/12/2);
-          } else {
-            frequency = frequencies[voices - 1];
-          }
-        } else {
-          frequency = frequencies[voices - 1];
-        }
-
-        #ifdef VIBRATO_ENABLE
-          if (vibrato_strength > 0) {
-            freq = vibrato(frequency);
-          } else {
-            freq = frequency;
-          }
-        #else
-          freq = frequency;
-        #endif
-      }
-
-      if (envelope_index < 65535) {
-        envelope_index++;
-      }
-
-      freq = voice_envelope(freq);
-
-      if (freq < 30.517578125) {
-        freq = 30.52;
-      }
-
-
-      if (GET_CHANNEL_1_FREQ != (uint16_t)freq) {
-        UPDATE_CHANNEL_1_FREQ(freq);
-      } else {
-        RESTART_CHANNEL_1();
-      }
-      //note_timbre;
-    }
-  }
-
-  if (playing_notes) {
-    if (note_frequency > 0) {
-      #ifdef VIBRATO_ENABLE
-        if (vibrato_strength > 0) {
-          freq = vibrato(note_frequency);
-        } else {
-          freq = note_frequency;
-        }
-      #else
-        freq = note_frequency;
-      #endif
-
-      if (envelope_index < 65535) {
-        envelope_index++;
-      }
-      freq = voice_envelope(freq);
-
-
-      if (GET_CHANNEL_1_FREQ != (uint16_t)freq) {
-        UPDATE_CHANNEL_1_FREQ(freq);
-        UPDATE_CHANNEL_2_FREQ(freq);
-      }
-      //note_timbre;
-    } else {
-        // gptStopTimer(&GPTD6);
-        // gptStopTimer(&GPTD7);
-    }
-
-    note_position++;
-    bool end_of_note = false;
-    if (GET_CHANNEL_1_FREQ > 0) {
-      if (!note_resting)
-        end_of_note = (note_position >= (note_length*8 - 1));
-      else
-        end_of_note = (note_position >= (note_length*8));
-    } else {
-      end_of_note = (note_position >= (note_length*8));
-    }
-
-    if (end_of_note) {
-      current_note++;
-      if (current_note >= notes_count) {
-        if (notes_repeat) {
-          current_note = 0;
-        } else {
-          STOP_CHANNEL_1();
-          STOP_CHANNEL_2();
-          // gptStopTimer(&GPTD8);
-          playing_notes = false;
-          return;
-        }
-      }
-      if (!note_resting) {
-        note_resting = true;
-        current_note--;
-        if ((*notes_pointer)[current_note][0] == (*notes_pointer)[current_note + 1][0]) {
-          note_frequency = 0;
-          note_length = 1;
-        } else {
-          note_frequency = (*notes_pointer)[current_note][0];
-          note_length = 1;
-        }
-      } else {
-        note_resting = false;
-        envelope_index = 0;
-        note_frequency = (*notes_pointer)[current_note][0];
-        note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100);
-      }
-
-      note_position = 0;
-    }
-  }
-
-  if (!audio_config.enable) {
-    playing_notes = false;
-    playing_note = false;
-  }
-}
 
 void play_note(float freq, int vol) {
 
@@ -605,29 +371,19 @@ void play_note(float freq, int vol) {
       audio_init();
   }
 
-  if (audio_config.enable && voices < 8) {
-
-     // Cancel notes if notes are playing
-    if (playing_notes) {
-      stop_all_notes();
-    }
-
+  if (audio_config.enable && dac_voices < 8) {
     playing_note = true;
-
-    envelope_index = 0;
-
     if (freq > 0) {
-      frequencies[voices] = freq;
-      volumes[voices] = vol;
-      voices++;
+      envelope_index = 0;
+      dac_frequencies[dac_voices] = freq;
+      dac_voices++;
     }
-
-    gptStart(&GPTD8, &gpt8cfg1);
-    gptStartContinuous(&GPTD8, 2U);
-    RESTART_CHANNEL_1();
-    RESTART_CHANNEL_2();
   }
+}
 
+__attribute__ ((weak))
+void dac_setup_note(void) {
+  dac_if[dac_voices] = 0.0f;
 }
 
 void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat) {
@@ -638,31 +394,26 @@ void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat) {
 
   if (audio_config.enable) {
 
-    // Cancel note if a note is playing
-    if (playing_note) {
-      stop_all_notes();
-    }
-
     playing_notes = true;
 
     notes_pointer = np;
     notes_count = n_count;
     notes_repeat = n_repeat;
 
-    place = 0;
     current_note = 0;
 
-    note_frequency = (*notes_pointer)[current_note][0];
     note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100);
     note_position = 0;
 
-    gptStart(&GPTD8, &gpt8cfg1);
-    gptStartContinuous(&GPTD8, 2U);
-    RESTART_CHANNEL_1();
-    RESTART_CHANNEL_2();
+    play_note((*notes_pointer)[current_note][0], 15);
+
   }
 }
 
+bool is_playing_note(void) {
+  return playing_note;
+}
+
 bool is_playing_notes(void) {
   return playing_notes;
 }
@@ -770,3 +521,11 @@ void increase_tempo(uint8_t tempo_change) {
     note_tempo -= tempo_change;
   }
 }
+
+uint8_t dac_number_of_voices(void) {
+  return dac_voices;
+}
+
+float dac_get_frequency(uint8_t index) {
+  return dac_frequencies[index];
+}

quantum/audio/audio_arm.h

@@ -0,0 +1,89 @@
+/* Copyright 2019 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "ch.h"
+
+/**
+ * Size of the dac_buffer arrays. All must be the same size.
+ */
+#define DAC_BUFFER_SIZE 256U
+
+/**
+ * Highest value allowed by our 12bit DAC.
+ */
+#ifndef DAC_SAMPLE_MAX
+  #define DAC_SAMPLE_MAX  4095U
+#endif
+
+// #define DAC_LOW_QUALITY
+
+/**
+ * These presets allow you to quickly switch between quality/voice settings for
+ * the DAC. The sample rate and number of voices roughly has an inverse
+ * relationship - slightly higher sample rates may be possible.
+ */
+#ifdef DAC_VERY_LOW_QUALITY
+  #define DAC_SAMPLE_RATE 11025U
+  #define DAC_VOICES_MAX 8
+#endif
+
+#ifdef DAC_LOW_QUALITY
+  #define DAC_SAMPLE_RATE 22050U
+  #define DAC_VOICES_MAX 4
+#endif
+
+#ifdef DAC_HIGH_QUALITY
+  #define DAC_SAMPLE_RATE 44100U
+  #define DAC_VOICES_MAX 2
+#endif
+
+#ifdef DAC_VERY_HIGH_QUALITY
+  #define DAC_SAMPLE_RATE 88200U
+  #define DAC_VOICES_MAX 1
+#endif
+
+/**
+ * Effective bitrate of the DAC. 44.1khz is the standard for most audio - any
+ * lower will sacrifice perceptible audio quality. Any higher will limit the
+ * number of simultaneous voices. In most situations, a tenth (1/10) of the
+ * sample rate is where notes become unbearable.
+ */
+#ifndef DAC_SAMPLE_RATE
+  #define DAC_SAMPLE_RATE 44100U
+#endif
+
+/**
+ * The number of voices (in polyphony) that are supported. If too high a value
+ * is used here, the keyboard will freeze and glitch-out when that many voices
+ * are being played.
+ */
+#ifndef DAC_VOICES_MAX
+  #define DAC_VOICES_MAX 2
+#endif
+
+/**
+ * The default value of the DAC when not playing anything. Certain hardware
+ * setups may require a high (DAC_SAMPLE_MAX) or low (0) value here.
+ */
+#ifndef DAC_OFF_VALUE
+  #define DAC_OFF_VALUE DAC_SAMPLE_MAX / 2
+#endif
+
+uint8_t dac_number_of_voices(void);
+float dac_get_frequency(uint8_t index);
+uint16_t dac_value_generate(void);
+void dac_setup_note(void);

quantum/process_keycode/process_music.c

@@ -195,6 +195,16 @@ bool process_music(uint16_t keycode, keyrecord_t *record) {
           music_sequence_interval+=10;
           return false;
         }
+
+        if (keycode == KC_LEFT) {
+            music_offset--;
+            return false;
+        }
+
+        if (keycode == KC_RIGHT) {
+            music_offset++;
+            return false;
+        }
       }
 
       uint8_t note = 36;

quantum/quantum.c

@@ -247,12 +247,6 @@ bool process_record_quantum(keyrecord_t *record) {
     preprocess_tap_dance(keycode, record);
   #endif
 
-  #if defined(OLED_DRIVER_ENABLE) && !defined(OLED_DISABLE_TIMEOUT)
-    // Wake up oled if user is using those fabulous keys!
-    if (record->event.pressed)
-      oled_on();
-  #endif
-
   if (!(
   #if defined(KEY_LOCK_ENABLE)
     // Must run first to be able to mask key_up events.
@@ -976,9 +970,6 @@ void matrix_init_quantum() {
   #ifdef OUTPUT_AUTO_ENABLE
     set_output(OUTPUT_AUTO);
   #endif
-  #ifdef OLED_DRIVER_ENABLE
-    oled_init(OLED_ROTATION_0);
-  #endif
   matrix_init_kb();
 }
 
@@ -1015,10 +1006,6 @@ void matrix_scan_quantum() {
     haptic_task();
   #endif
 
-  #ifdef OLED_DRIVER_ENABLE
-    oled_task();
-  #endif
-
   matrix_scan_kb();
 }
 #if defined(BACKLIGHT_ENABLE) && (defined(BACKLIGHT_PIN) || defined(BACKLIGHT_PINS))
@@ -1214,10 +1201,10 @@ void backlight_task(void) {
 // (which is not possible since the backlight is not wired to PWM pins on the
 // CPU), we do the LED on/off by oursleves.
 // The timer is setup to count up to 0xFFFF, and we set the Output Compare
-// register to the current 16bits backlight level (after CIE correction). 
-// This means the CPU will trigger a compare match interrupt when the counter 
-// reaches the backlight level, where we turn off the LEDs, 
-// but also an overflow interrupt when the counter rolls back to 0, 
+// register to the current 16bits backlight level (after CIE correction).
+// This means the CPU will trigger a compare match interrupt when the counter
+// reaches the backlight level, where we turn off the LEDs,
+// but also an overflow interrupt when the counter rolls back to 0,
 // in which we're going to turn on the LEDs.
 // The LED will then be on for OCRxx/0xFFFF time, adjusted every 244Hz.
 
@@ -1229,7 +1216,7 @@ ISR(TIMERx_COMPA_vect) {
 }
 
 // Triggered when the counter reaches the TOP value
-// this one triggers at F_CPU/65536 =~ 244 Hz 
+// this one triggers at F_CPU/65536 =~ 244 Hz
 ISR(TIMERx_OVF_vect) {
 #ifdef BACKLIGHT_BREATHING
   breathing_task();

quantum/split_common/matrix.c

@@ -299,7 +299,7 @@ uint8_t _matrix_scan(void) {
 
   debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed);
 
-  return 1;
+  return (uint8_t)changed;
 }
 
 uint8_t matrix_scan(void) {

quantum/stm32/mcuconf.h

@@ -141,8 +141,8 @@
 #define STM32_GPT_USE_TIM3                  FALSE
 #define STM32_GPT_USE_TIM4                  FALSE
 #define STM32_GPT_USE_TIM6                  TRUE
-#define STM32_GPT_USE_TIM7                  TRUE
-#define STM32_GPT_USE_TIM8                  TRUE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
 #define STM32_GPT_TIM1_IRQ_PRIORITY         7
 #define STM32_GPT_TIM2_IRQ_PRIORITY         7
 #define STM32_GPT_TIM3_IRQ_PRIORITY         7

tmk_core/common/keyboard.c

@@ -75,6 +75,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef QWIIC_ENABLE
 #   include "qwiic.h"
 #endif
+#ifdef OLED_DRIVER_ENABLE
+    #include "oled_driver.h"
+#endif
 #ifdef VELOCIKEY_ENABLE
   #include "velocikey.h"
 #endif
@@ -205,6 +208,9 @@ void keyboard_init(void) {
 #ifdef QWIIC_ENABLE
     qwiic_init();
 #endif
+#ifdef OLED_DRIVER_ENABLE
+    oled_init(OLED_ROTATION_0);
+#endif
 #ifdef PS2_MOUSE_ENABLE
     ps2_mouse_init();
 #endif
@@ -262,7 +268,11 @@ void keyboard_task(void)
     uint8_t keys_processed = 0;
 #endif
 
+#if defined(OLED_DRIVER_ENABLE) && !defined(OLED_DISABLE_TIMEOUT)
+    uint8_t ret = matrix_scan();
+#else
     matrix_scan();
+#endif
 
     if (is_keyboard_master()) {
         for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
@@ -306,6 +316,15 @@ MATRIX_LOOP_END:
     qwiic_task();
 #endif
 
+#ifdef OLED_DRIVER_ENABLE
+    oled_task();
+#ifndef OLED_DISABLE_TIMEOUT
+    // Wake up oled if user is using those fabulous keys!
+    if (ret)
+        oled_on();
+#endif
+#endif
+
 #ifdef MOUSEKEY_ENABLE
     // mousekey repeat & acceleration
     mousekey_task();

tmk_core/common/mousekey.c

@@ -114,7 +114,9 @@ void mousekey_task(void) {
   /* diagonal move [1/sqrt(2)] */
   if (mouse_report.x && mouse_report.y) {
     mouse_report.x = times_inv_sqrt2(mouse_report.x);
+    if (mouse_report.x == 0) { mouse_report.x = 1; }
     mouse_report.y = times_inv_sqrt2(mouse_report.y);
+    if (mouse_report.y == 0) { mouse_report.y = 1; }
   }
   if (mouse_report.v > 0) mouse_report.v = wheel_unit();
   if (mouse_report.v < 0) mouse_report.v = wheel_unit() * -1;
@@ -232,7 +234,9 @@ void adjust_speed(void) {
   // adjust for diagonals
   if (mouse_report.x && mouse_report.y) {
   mouse_report.x = times_inv_sqrt2(mouse_report.x);
+  if (mouse_report.x == 0) { mouse_report.x = 1; }
   mouse_report.y = times_inv_sqrt2(mouse_report.y);
+  if (mouse_report.y == 0) { mouse_report.y = 1; }
   }
   if (mouse_report.h && mouse_report.v) {
   mouse_report.h = times_inv_sqrt2(mouse_report.h);

users/konstantin/konstantin.c

@@ -4,107 +4,99 @@ __attribute__((weak))
 void keyboard_pre_init_keymap(void) {}
 
 void keyboard_pre_init_user(void) {
-  keyboard_pre_init_keymap();
+    keyboard_pre_init_keymap();
 }
 
 __attribute__((weak))
 void eeconfig_init_keymap(void) {}
 
 void eeconfig_init_user(void) {
-  eeconfig_init_keymap();
+    eeconfig_init_keymap();
 }
 
 __attribute__((weak))
 void keyboard_post_init_keymap(void) {}
 
 void keyboard_post_init_user(void) {
-  keyboard_post_init_keymap();
+    keyboard_post_init_keymap();
 }
 
 __attribute__((weak))
 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  return true;
+    return true;
 }
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (!process_record_keymap(keycode, record)) {
-    return false;
-  }
-
-#ifdef LAYER_NUMPAD
-  void toggle_numpad(void) {
-    layer_invert(L_NUMPAD);
-    bool numpad = IS_LAYER_ON(L_NUMPAD), num_lock = IS_HOST_LED_ON(USB_LED_NUM_LOCK);
-    if (num_lock != numpad) {
-      tap_code(KC_NLCK);  // Toggle Num Lock to match layer state
-    }
-  }
-#endif
-
-  switch (keycode) {
-  case CLEAR:
-    if (record->event.pressed) {
-      SEND_STRING(SS_LCTRL("a") SS_TAP(X_DELETE));
-    }
-    return false;
-
-  case DST_P_R:
-    (record->event.pressed ? register_code16 : unregister_code16)(
-      (get_mods() & DST_MOD_MASK) ? DST_REM : DST_PRV
-    );
-    return false;
-
-  case DST_N_A:
-    (record->event.pressed ? register_code16 : unregister_code16)(
-      (get_mods() & DST_MOD_MASK) ? DST_ADD : DST_NXT
-    );
-    return false;
-
-#ifdef LAYER_FN
-    static bool fn_lock;
-
-  case FN_FNLK:
-    if (record->event.pressed && record->tap.count == TAPPING_TOGGLE) {
-      fn_lock = !IS_LAYER_ON(L_FN);  // Fn layer will be toggled after this
-    }
-    return true;
-#endif
-
-#ifdef LAYER_NUMPAD
-  case NUMPAD:
-    if (record->event.pressed) {
-      toggle_numpad();
-    }
-    return false;
-#endif
-
-  case KC_ESC:
-    if (record->event.pressed) {
-#ifdef LAYER_NUMPAD
-      if (IS_LAYER_ON(L_NUMPAD)) {
-        toggle_numpad();
+    if (!process_record_keymap(keycode, record)) {
         return false;
-      }
+    }
+
+    switch (keycode) {
+    case CLEAR:
+        if (record->event.pressed) {
+            SEND_STRING(SS_LCTRL("a") SS_TAP(X_DELETE));
+        }
+        return false;
+
+    case DST_P_R:
+        (record->event.pressed ? register_code16 : unregister_code16)(
+            (get_mods() & DST_MOD_MASK) ? DST_REM : DST_PRV
+        );
+        return false;
+
+    case DST_N_A:
+        (record->event.pressed ? register_code16 : unregister_code16)(
+            (get_mods() & DST_MOD_MASK) ? DST_ADD : DST_NXT
+        );
+        return false;
+
+#ifdef LAYER_FN
+        static bool fn_lock;
+
+    case FN_FNLK:
+        if (record->event.pressed && record->tap.count == TAPPING_TOGGLE) {
+            fn_lock = !IS_LAYER_ON(L_FN);  // Fn layer will be toggled after this
+        }
+        return true;
+#endif
+
+    case KC_ESC:
+        if (record->event.pressed) {
+#ifdef LAYER_NUMPAD  // Disable Numpad layer before Fn layer
+            if (IS_LAYER_ON(L_NUMPAD)) {
+                layer_off(L_NUMPAD);
+                return false;
+            }
 #endif
 #ifdef LAYER_FN
-      if (IS_LAYER_ON(L_FN) && fn_lock) {
-        layer_off(L_FN);
-        return fn_lock = false;
-      }
+            if (IS_LAYER_ON(L_FN) && fn_lock) {
+                layer_off(L_FN);
+                return fn_lock = false;
+            }
 #endif
-    }
-    return true;
+        }
+        return true;
 
-  default:
-    return true;
-  }
+    default:
+        return true;
+    }
 }
 
 __attribute__((weak))
 uint32_t layer_state_set_keymap(uint32_t state) {
-  return state;
+    return state;
 }
 
 uint32_t layer_state_set_user(uint32_t state) {
-  return layer_state_set_keymap(state);
+    state = layer_state_set_keymap(state);
+
+#ifdef LAYER_NUMPAD
+    bool numpad = state & 1UL<<L_NUMPAD;
+    bool num_lock = IS_HOST_LED_ON(USB_LED_NUM_LOCK);
+    if (numpad != num_lock) {
+        tap_code(KC_NLCK);  // Toggle Num Lock to match Numpad layer state
+    }
+#endif
+
+    return state;
 }

users/konstantin/konstantin.h

@@ -1,20 +1,25 @@
 #pragma once
 
 #include "quantum.h"
-#if defined(RGBLIGHT_ENABLE) || defined(RGBMATRIX_ENABLE)
-  #include "rgb.h"
+#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+    #include "rgb.h"
 #endif
 #ifdef TAP_DANCE_ENABLE
-  #include "tap_dance.h"
+    #include "tap_dance.h"
 #endif
 #if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE)
-  #include "unicode.h"
+    #include "unicode.h"
 #endif
 
 #ifdef LAYER_FN
-  #define FN      MO(L_FN)
-  #define FN_CAPS LT(L_FN, KC_CAPS)
-  #define FN_FNLK TT(L_FN)
+    #define FN      MO(L_FN)
+    #define FN_CAPS LT(L_FN, KC_CAPS)
+    #define FN_ESC  LT(L_FN, KC_ESC)
+    #define FN_FNLK TT(L_FN)
+#endif
+
+#ifdef LAYER_NUMPAD
+    #define NUMPAD TG(L_NUMPAD)
 #endif
 
 #define KC_SYSR LALT(KC_PSCR)
@@ -27,50 +32,49 @@
 #define MV_RGHT LCTL(KC_RGHT)
 #define TOP     LCTL(KC_HOME)
 #define BOTTOM  LCTL(KC_END)
-#define PRV_TAB LCTL(KC_PGUP)
-#define NXT_TAB LCTL(KC_PGDN)
+#define TAB_PRV LCTL(KC_PGUP)
+#define TAB_NXT LCTL(KC_PGDN)
+#define DEL_PRV LCTL(KC_BSPC)
+#define DEL_NXT LCTL(KC_DEL)
 
 #define DST_ADD LCTL(LGUI(KC_D))
 #define DST_REM LCTL(LGUI(KC_F4))
 #define DST_PRV LCTL(LGUI(KC_LEFT))
 #define DST_NXT LCTL(LGUI(KC_RGHT))
 #ifndef DST_MOD_MASK
-  #define DST_MOD_MASK MOD_MASK_CTRL
+    #define DST_MOD_MASK MOD_MASK_SHIFT
 #endif
 
 #define LCT_CPS LCTL_T(KC_CAPS)
 
 #ifdef SEND_STRING_CLEAN
-  #undef  SEND_STRING
-  #define SEND_STRING(string) {     \
-      uint8_t ss_mods = get_mods(); \
-      clear_mods();                 \
-      send_string_P(PSTR(string));  \
-      set_mods(ss_mods);            \
-    }
+    #undef  SEND_STRING
+    #define SEND_STRING(string) {         \
+            uint8_t ss_mods = get_mods(); \
+            clear_mods();                 \
+            send_string_P(PSTR(string));  \
+            set_mods(ss_mods);            \
+        }
 #endif
 
 enum keycodes_user {
-  CLEAR = SAFE_RANGE,
-  DST_P_R,
-  DST_N_A,
-#ifdef LAYER_NUMPAD
-  NUMPAD,
-#endif
+    CLEAR = SAFE_RANGE,
+    DST_P_R,
+    DST_N_A,
 
-  RANGE_KEYMAP,
+    RANGE_KEYMAP,
 };
 
 enum layers_user {
-  L_BASE,
+    L_BASE,
 #ifdef LAYER_FN
-  L_FN,
+    L_FN,
 #endif
 #ifdef LAYER_NUMPAD
-  L_NUMPAD,
+    L_NUMPAD,
 #endif
 
-  L_RANGE_KEYMAP,
+    L_RANGE_KEYMAP,
 };
 
 void keyboard_pre_init_keymap(void);

users/konstantin/rgb.h

@@ -3,15 +3,15 @@
 #include "quantum.h"
 
 typedef struct {
-  uint16_t h;  // 0–360
-  uint8_t  s;  // 0–255
-  uint8_t  v;  // 0–255
+    uint16_t h;  // 0–360
+    uint8_t  s;  // 0–255
+    uint8_t  v;  // 0–255
 } hsv_t;
 
 typedef struct {
-  uint8_t r;  // 0–255
-  uint8_t g;  // 0–255
-  uint8_t b;  // 0–255
+    uint8_t r;  // 0–255
+    uint8_t g;  // 0–255
+    uint8_t b;  // 0–255
 } rgb_t;
 
 extern const hsv_t GODSPEED_BLUE;

users/konstantin/rules.mk

@@ -1,12 +1,15 @@
 SRC += konstantin.c
-ifneq (,$(filter yes,$(RGBLIGHT_ENABLE) $(RGB_MATRIX_ENABLE)))  # if either is yes
-  SRC += rgb.c
+ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
+    SRC += rgb.c
+endif
+ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
+    SRC += rgb.c
 endif
 ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
-  SRC += tap_dance.c
+    SRC += tap_dance.c
 endif
-ifneq (,$(filter yes,$(UNICODE_ENABLE) $(UNICODEMAP_ENABLE)))  # if either is yes
-  SRC += unicode.c
+ifneq (,$(filter yes,$(UNICODE_ENABLE) $(UNICODEMAP_ENABLE)))
+    SRC += unicode.c
 endif
 
 EXTRAFLAGS += -flto