update rgb config

compile issues
merge from master
2019-05-07 00:13:50 -04:00 · 2019-05-06 21:59:36 -04:00 · 2019-05-03 13:23:27 -04:00 · 2019-05-03 13:13:09 -04:00 · 2019-05-02 21:31:55 -04:00 · 2019-01-03 13:19:05 -05:00
85 changed files with 2948 additions and 936 deletions
--- a/docs/feature_macros.md
+++ b/docs/feature_macros.md
@@ -230,7 +230,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 void matrix_scan_user(void) {     # The very important timer. 
  if (is_alt_tab_active) {
    if (timer_elapsed(alt_tab_timer) > 1000) {
-      unregister_code(KC_LALT);
+      unregister_code16(LALT(KC_TAB));
      is_alt_tab_active = false;
    }
  }
--- a/docs/feature_space_cadet.md
+++ b/docs/feature_space_cadet.md
@@ -39,15 +39,15 @@ By default Space Cadet assumes a US ANSI layout, but if your layout uses differe
 |`LSPO_KEYS`     |`KC_LSFT, LSPO_MOD, LSPO_KEY`  |Send `KC_LSFT` when held, the mod and  key defined by `LSPO_MOD` and `LSPO_KEY`. |
 |`RSPC_KEYS`     |`KC_RSFT, RSPC_MOD, RSPC_KEY`  |Send `KC_RSFT` when held, the mod and  key defined by `RSPC_MOD` and `RSPC_KEY`. |
 |`LCPO_KEYS`     |`KC_LCTL, KC_LCTL, KC_9`       |Send `KC_LCTL` when held, the mod `KC_LCTL` with the key `KC_9` when tapped.     |
-|`RCPC_KEYS`     |`KC_RCTL, KC_RCTL, KC_0`       |Send `KC_RCTL` when held, the mod `KC_RCTL` with the key `KC_0` when tapped.     |
+|`RCPO_KEYS`     |`KC_RCTL, KC_RCTL, KC_0`       |Send `KC_RCTL` when held, the mod `KC_RCTL` with the key `KC_0` when tapped.     |
 |`LAPO_KEYS`     |`KC_LALT, KC_LALT, KC_9`       |Send `KC_LALT` when held, the mod `KC_LALT` with the key `KC_9` when tapped.     |
-|`RAPC_KEYS`     |`KC_RALT, KC_RALT, KC_0`       |Send `KC_RALT` when held, the mod `KC_RALT` with the key `KC_0` when tapped.     |
+|`RAPO_KEYS`     |`KC_RALT, KC_RALT, KC_0`       |Send `KC_RALT` when held, the mod `KC_RALT` with the key `KC_0` when tapped.     |
 |`SFTENT_KEYS`   |`KC_RSFT, KC_TRNS, SFTENT_KEY` |Send `KC_RSFT` when held, no mod with the key `SFTENT_KEY` when tapped.          |


 ## Obsolete Configuration

-These defines are used in the above defines internally to support backwards compatibility, so you may continue to use them, however the above defines open up a larger range of flexibility than before. As an example, say you want to not send any modifier when you tap just `KC_LSPO`, with the old defines you had an all or nothing choice of using the `DISABLE_SPACE_CADET_MODIFIER` define. Now you can define that key as: `#define LSPO_KEYS KC_LSFT, KC_TRNS, KC_9`. This tells the system to set Left Shift if held or used with other keys, then on tap send no modifier (transparent) with the `KC_9`.
+These defines are used in the above defines internally to support backwards compatibility, so you may continue to use them, however the above defines open up a larger range of flexibility than before. As an example, say you want to not send any modifier when you tap just `KC_LSPO`, with the old defines you had an all or nothing choice of using the `DISABLE_SPACE_CADET_MODIFIER` define. Now you can define that key as: `#define KC_LSPO_KEYS KC_LSFT, KC_TRNS, KC_9`. This tells the system to set Left Shift if held or used with other keys, then on tap send no modifier (transparent) with the `KC_9`

 |Define                        |Default      |Description                                                       |
 |------------------------------|-------------|------------------------------------------------------------------|
--- a/docs/newbs_testing_debugging.md
+++ b/docs/newbs_testing_debugging.md
@@ -13,9 +13,9 @@ Note: These programs are not provided by or endorsed by QMK.
 * [Keyboard Tester](http://www.keyboardtester.com) (Web Based)
 * [Keyboard Checker](http://keyboardchecker.com) (Web Based)

-## Debugging
+## Debugging With QMK Toolbox

-Your keyboard will output debug information if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, use the [Command](feature_command.md) feature to enable debug mode, or add the following code to your keymap.
+[QMK Toolbox](https://github.com/qmk/qmk_toolbox) will show messages from your keyboard if you have `CONSOLE_ENABLE = yes` in your `rules.mk`. By default the output is very limited, but you can turn on debug mode to increase the amount of debug output. Use the `DEBUG` keycode in your keymap, use the [Command](feature_command.md) feature to enable debug mode, or add the following code to your keymap.

 ```c
 void keyboard_post_init_user(void) {
@@ -27,14 +27,6 @@ void keyboard_post_init_user(void) {
 }
 ```

-### Debugging With QMK Toolbox
-
-For compatible platforms, [QMK Toolbox](https://github.com/qmk/qmk_toolbox) can be used to display debug messages from your keyboard.
-
-### Debugging With hid_listen
-
-Prefer a terminal based solution? [hid_listen](https://www.pjrc.com/teensy/hid_listen.html), provided by PJRC, can also be used to display debug messages. Prebuilt binaries for Windows,Linux,and MacOS are available.
-
 <!-- FIXME: Describe the debugging messages here. -->

 ## Sending Your Own Debug Messages
@@ -49,51 +41,3 @@ After that you can use a few different print functions:
 * `uprintf("%s string", var)`: Print a formatted string
 * `dprint("string")` Print a simple string, but only when debug mode is enabled
 * `dprintf("%s string", var)`: Print a formatted string, but only when debug mode is enabled
-
-## Debug Examples
-
-Below is a collection of real world debugging examples. For additional information, refer to [Debugging/Troubleshooting QMK](faq_debug.md).
-
-### Which matrix position is this keypress?
-
-When porting, or when attempting to diagnose pcb issues, it can be useful to know if a keypress is scanned correctly. To enable logging for this scenario, add the following code to your keymaps `keymap.c`
-
-```c
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  // If console is enabled, it will print the matrix position and status of each key pressed
-#ifdef CONSOLE_ENABLE
-    uprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
-#endif 
-  return true;
-}
-```
-
-Example output
-```text
-Waiting for device:.......
-Listening:
-KL: kc: 169, col: 0, row: 0, pressed: 1
-KL: kc: 169, col: 0, row: 0, pressed: 0
-KL: kc: 174, col: 1, row: 0, pressed: 1
-KL: kc: 174, col: 1, row: 0, pressed: 0
-KL: kc: 172, col: 2, row: 0, pressed: 1
-KL: kc: 172, col: 2, row: 0, pressed: 0
-```
-
-### How long did it take to scan for a keypress?
-
-When testing performance issues, it can be useful to know the frequency at which the switch matrix is being scanned. To enable logging for this scenario, add the following code to your keymaps `config.h`
-
-```c
-#define DEBUG_MATRIX_SCAN_RATE
-```
-
-Example output
-```text
-  > matrix scan frequency: 315
-  > matrix scan frequency: 313
-  > matrix scan frequency: 316
-  > matrix scan frequency: 316
-  > matrix scan frequency: 316
-  > matrix scan frequency: 316
-```
--- a/docs/zh-cn/getting_started_introduction.md
+++ b/docs/zh-cn/getting_started_introduction.md
@@ -1,54 +1,54 @@
-# 介绍
-
-本页解释了使用QMK项目所需的基本信息。它假定您能熟练使用Unix shell，但您不熟悉C语言也不熟悉使用make编译。
-
-## 基本QMK结构
-
-QMK是[Jun Wako](https://github.com/tmk)的[tmk_keyboard](https://github.com/tmk/tmk_keyboard)工程的一个分叉。经过更改的TMK原始代码放在`tmk` 文件夹中。 QMK增加的新东西可以在 `quantum` 文件夹中找到。 键盘项目可以在 `handwired`（手动飞线） 和 `keyboard`（PCB键盘）这两个文件夹找到。
-
-### 用户空间结构
-
-在`users`文件夹里面的目录是每个用户的目录。这个文件夹里面放的是用户们在不同键盘都能用到的代码。详见[用户空间特性](feature_userspace.md) 
-
-### 键盘项目结构
-
-在`keyboards`文件夹和他的子文件夹`handwired`中就是各个键盘的项目了，比如`qmk_firmware/keyboards/clueboard`。内部结构与如下:
-
-* `keymaps/`: 可以构建的不同布局
-* `rules.mk`: 用来设置 "make" 命令默认选项的文件。别直接编辑这个文件,你应该使用具体某个布局的 `rules.mk`.
-* `config.h`: 用于设置默认编译选项的文件。别直接编辑这个文件, 你应该使用具体某个布局的 `config.h`.
-
-### 布局结构
-
-在各个布局的文件夹，你能找到以下文件。只有 `keymap.c` 是必要的, 如果其他文件找不到就会直接选择默认选项。
-
-* `config.h`: 配置布局的选项
-* `keymap.c`: 布局的全部代码, 必要文件
-* `rules.mk`: 使能的QMK特性
-* `readme.md`:介绍你的布局,告诉别人怎么使用，附上功能说明。请将图片上传到imgur等图床（译者注：imgur可能已被墙，为了方便国人访问，建议使用国内可以直接访问的图床）。
-
-# `config.h` 文件
-
-有三个重要的`config.h` 位置:
-
-* 键盘 (`/keyboards/<keyboard>/config.h`)
-* 用户空间 (`/users/<user>/config.h`)
-* 布局 (`/keyboards/<keyboard>/keymaps/<keymap>/config.h`)
-
-构建系统按照上述顺序自动获取配置文件。如果要覆盖由上一个 `config.h` 所做的设置，您需要首先为要更改的设置包含一些样板代码。
-
-```
-#pragma once
-```
-
-要覆盖上一个 `config.h` 所做的设置，你要先 `#undef` 然后再 `#define` 这个设置.
-
-样板代码和设置看起来像这样：
-
-```
-#pragma once
-
-// 像下面那样覆盖设置（MY_SETTING指的是你要覆盖的设置项）!
-#undef MY_SETTING
-#define MY_SETTING 4
-```
+# 介绍
+
+本页解释了使用QMK项目所需的基本信息。它假定您能熟练使用Unix shell，但您不熟悉C语言也不熟悉使用make编译。
+
+## 基本QMK结构
+
+QMK是[Jun Wako](https://github.com/tmk)的[tmk_keyboard](https://github.com/tmk/tmk_keyboard)工程的一个分叉。经过更改的TMK原始代码放在`tmk` 文件夹中。 QMK增加的新东西可以在 `quantum` 文件夹中找到。 键盘项目可以在 `handwired`（手动飞线） 和 `keyboard`（PCB键盘）这两个文件夹找到。
+
+### 用户空间结构
+
+在`users`文件夹里面的目录是每个用户的目录。这个文件夹里面放的是用户们在不同键盘都能用到的代码。详见[用户空间特性](feature_userspace.md) 
+
+### 键盘项目结构
+
+在`keyboards`文件夹和他的子文件夹`handwired`中就是各个键盘的项目了，比如`qmk_firmware/keyboards/clueboard`。内部结构与如下:
+
+* `keymaps/`: 可以构建的不同布局
+* `rules.mk`: 用来设置 "make" 命令默认选项的文件。别直接编辑这个文件,你应该使用具体某个布局的 `rules.mk`.
+* `config.h`: 用于设置默认编译选项的文件。别直接编辑这个文件, 你应该使用具体某个布局的 `config.h`.
+
+### 布局结构
+
+在各个布局的文件夹，你能找到以下文件。只有 `keymap.c` 是必要的, 如果其他文件找不到就会直接选择默认选项。
+
+* `config.h`: 配置布局的选项
+* `keymap.c`: 布局的全部代码, 必要文件
+* `rules.mk`: 使能的QMK特性
+* `readme.md`:介绍你的布局,告诉别人怎么使用，附上功能说明。请将图片上传到imgur等图床（译者注：imgur可能已被墙，为了方便国人访问，建议使用国内可以直接访问的图床）。
+
+# `config.h` 文件
+
+有三个重要的`config.h` 位置:
+
+* 键盘 (`/keyboards/<keyboard>/config.h`)
+* 用户空间 (`/users/<user>/config.h`)
+* 布局 (`/keyboards/<keyboard>/keymaps/<keymap>/config.h`)
+
+构建系统按照上述顺序自动获取配置文件。如果要覆盖由上一个 `config.h` 所做的设置，您需要首先为要更改的设置包含一些样板代码。
+
+```
+#pragma once
+```
+
+要覆盖上一个 `config.h` 所做的设置，你要先 `#undef` 然后再 `#define` 这个设置.
+
+样板代码和设置看起来像这样：
+
+```
+#pragma once
+
+// 像下面那样覆盖设置（MY_SETTING指的是你要覆盖的设置项）!
+#undef MY_SETTING
+#define MY_SETTING 4
+```
--- a/drivers/arm/i2c_master.c
+++ b/drivers/arm/i2c_master.c
@@ -92,6 +92,10 @@ i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16
  return chibios_to_qmk(&status);
 }

+i2c_status_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length) {
+  return i2cMasterTransmitTimeout(&I2C_DRIVER, address/2, tx_body, tx_length, rx_body, rx_length, MS2ST(100));
+}
+
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout)
 {
  i2c_address = devaddr;
--- a/keyboards/dz60/dz60.h
+++ b/keyboards/dz60/dz60.h
@@ -386,31 +386,4 @@
    { k40,   k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, KC_NO, k4b,  KC_NO, k4d,  k4e   }  \
 }

-/* LAYOUT_60_iso_split_space_bs_rshift
- * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
- * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
- * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
- * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │     │
- * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d  │
- * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │    │
- * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤
- * │30  |31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
- * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬────┬┴───┤
- * │40  │41  │43  │44      │46  │48        │4a  │4b  │4d  │4e  │
- * └────┴────┴────┴────────┴────┴──────────┴────┴────┴────┴────┘
-*/
-#define LAYOUT_60_iso_split_space_bs_rshift( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
-    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
-    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \
-    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, k3e, \
-    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
-) { \
-    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
-    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
-    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
-    { k30,  k31,   k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  k3b,   KC_NO,k3d,  k3e   }, \
-    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
-}
-
 #endif
--- a/keyboards/dz60/info.json
+++ b/keyboards/dz60/info.json
@@ -60,10 +60,6 @@
    "LAYOUT_60_tsangan_hhkb": {
      "key_count": 62,
      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Win", "x":11, "y":4, "w":1.5}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
-    },
-    "LAYOUT_60_iso_split_space_bs_rshift": {
-      "key_count": 66,
-      "layout": [{"label":"¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Del", "x":13, "y":0, "w":1}, {"label":"Backspace", "x":14, "y":0, "w":1}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Print screen", "x":14, "y":3, "w":1}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"label":"FN", "x":6.00, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
    }
  }
 }
--- a/keyboards/dz60/keymaps/olligranlund_iso/keymap.c
+++ b/keyboards/dz60/keymaps/olligranlund_iso/keymap.c
@@ -1,38 +0,0 @@
-#include QMK_KEYBOARD_H
-
-/* ISO 60 layout by olligranlund
-*
-* This layout starts from a standard ISO 60% layout, and adds one function layer.
-* If you wish to only have one wide spacebar, you can easily do that by dismissing the "side" spacebar switches.
-*
-* Default Layer
-* ,-----------------------------------------------------------------------------------------.
-* | Esc | 1 ! | 2 " | 3 § | 4 $ | 5 % | 6 & | 7 / | 8 ( | 9 ) | 0 = | ß ? | ´ ` | Del | BSPC|
-* |-----------------------------------------------------------------------------------------|
-* | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  Ä  | + * | Enter  |
-* |----------------------------------------------------------------------------------       |
-* | FN      |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  Ö  |  Ü  | # ' |       |
-* |-----------------------------------------------------------------------------------------|
-* | Shift | < > |  Z  |  X  |  C  |  V  |  B  |  N  |  M  | , ; | . : | - _ |  Shift  |Shift|
-* |-----------------------------------------------------------------------------------------|
-* | LCtl  | LGUI  | LAlt  |  Space      | Space |  Space      | RAlt  | FN    | App  | RCtl |
-* `-----------------------------------------------------------------------------------------'
-*/
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-	LAYOUT_60_iso_split_space_bs_rshift(
-		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,     KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_DEL, KC_BSPC,
-		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,     KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
-		MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,     KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
-		KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,     KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_PSCR,
-		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, MO(1),    KC_NO,   KC_APP,   KC_RCTL),
-
-	LAYOUT_60_iso_split_space_bs_rshift(
-		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,
-		KC_NO,   KC_MPRV, KC_MPLY, KC_MNXT, KC_NO,   KC_NO,   KC_NO,   KC_PGDOWN,KC_UP,   KC_PGUP, KC_NO,   KC_NO,   KC_NO,
-		KC_NO,   KC_VOLD, KC_MUTE, KC_VOLU, KC_NO,   KC_NO,   KC_HOME,  KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,   KC_NO,   KC_NO,   KC_NO,
-		KC_LSFT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_END,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_RSFT, KC_CAPS,
-		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, MO(1),    KC_NO,   KC_APP,  KC_RCTL),
-
-};
--- a/keyboards/dz60/keymaps/olligranlund_iso/readme.md
+++ b/keyboards/dz60/keymaps/olligranlund_iso/readme.md
@@ -1,6 +0,0 @@
-# DZ60 with splitted parts
-### by Oliver Granlund
-
-![Finished product](https://i.imgur.com/HlEo5Yg.jpg)
-
-This is still under progress, but currently works on Windows as a daily driver.
--- a/keyboards/ergodash/ergodash.h
+++ b/keyboards/ergodash/ergodash.h
@@ -6,6 +6,26 @@
 #ifdef KEYBOARD_ergodash_rev1
    #include "rev1.h"

+    // Used to create a keymap using only KC_ prefixed keys
+    #define LAYOUT_kc( \
+        L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+        L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+        L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+        L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
+        LT0, LT1, LT2, LT3,      LT4, LT5, RT0, RT1,      RT2, RT3, RT4, RT5  \
+        ) \
+        LAYOUT( \
+            KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
+            KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
+            KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
+            KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, KC_##R36, \
+            KC_##LT0, KC_##LT1, KC_##LT2, KC_##LT3,           KC_##LT4, KC_##LT5, KC_##RT0, KC_##RT1,           KC_##RT2, KC_##RT3, KC_##RT4, KC_##RT5  \
+        )
+#endif // #ifdef KEYBOARD_ergodash_rev1
+
+#ifdef KEYBOARD_ergodash_rev2
+    #include "rev2.h"
+
    // Used to create a keymap using only KC_ prefixed keys
    #define LAYOUT_kc( \
        L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
@@ -21,7 +41,7 @@
            KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, KC_##R36, \
            KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##L46, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45, KC_##R46  \
        )
-#endif // #ifdef KEYBOARD_ergodash_rev1
+#endif // #ifdef KEYBOARD_ergodash_rev2

 #ifdef KEYBOARD_ergodash_mini
    #include "mini.h"
--- a/keyboards/ergodash/i2c.c
+++ b/keyboards/ergodash/i2c.c
@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif
--- a/keyboards/ergodash/i2c.h
+++ b/keyboards/ergodash/i2c.h
@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif
--- a/keyboards/ergodash/matrix.c
+++ b/keyboards/ergodash/matrix.c
@@ -0,0 +1,490 @@
+/*
+Copyright 2017 Danny Nguyen <danny@keeb.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+#include "timer.h"
+
+#ifdef BACKLIGHT_ENABLE
+    #include "backlight.h"
+    extern backlight_config_t backlight_config;
+#endif
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else // USE_SERIAL
+#  include "serial.h"
+#endif
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#else
+#    error "Currently only supports 8 COLS"
+#endif
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#define ERROR_DISCONNECT_COUNT 5
+
+#define SERIAL_LED_ADDR 0x00
+
+#define ROWS_PER_HAND (MATRIX_ROWS/2)
+
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_enable = true;
+    debug_matrix = true;
+    debug_mouse = true;
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    TX_RX_LED_INIT;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+
+}
+
+uint8_t _matrix_scan(void)
+{
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+#if (DIODE_DIRECTION == COL2ROW)
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+                PORTD ^= (1 << 2);
+            }
+
+#       else
+            read_cols_on_row(matrix+offset, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix+offset, current_col);
+#       endif
+
+    }
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+            debouncing = false;
+        }
+#   endif
+
+    return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) goto i2c_error;
+
+    // start of matrix stored at 0x00
+    err = i2c_master_write(0x00);
+    if (err) goto i2c_error;
+
+#ifdef BACKLIGHT_ENABLE
+    // Write backlight level for slave to read
+    err = i2c_master_write(backlight_config.enable ? backlight_config.level : 0);
+#else
+    // Write zero, so our byte index is the same
+    err = i2c_master_write(0x00);
+#endif
+    if (err) goto i2c_error;
+
+    // Start read
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+    if (err) goto i2c_error;
+
+    if (!err) {
+        int i;
+        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+        }
+        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+        i2c_master_stop();
+    } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+        i2c_reset_state();
+        return err;
+    }
+
+    return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    if (serial_update_buffers()) {
+        return 1;
+    }
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+
+#ifdef BACKLIGHT_ENABLE
+    // Write backlight level for slave to read
+    serial_master_buffer[SERIAL_LED_ADDR] = backlight_config.enable ? backlight_config.level : 0;
+#endif
+    return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+    uint8_t ret = _matrix_scan();
+
+#ifdef USE_I2C
+    if( i2c_transaction() ) {
+#else // USE_SERIAL
+    if( serial_transaction() ) {
+#endif
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+    matrix_scan_quantum();
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+    _matrix_scan();
+
+    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_I2C
+#ifdef BACKLIGHT_ENABLE
+    // Read backlight level sent from master and update level on slave
+    backlight_set(i2c_slave_buffer[0]);
+#endif
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        i2c_slave_buffer[i+1] = matrix[offset+i];
+    }
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+
+#ifdef BACKLIGHT_ENABLE
+    // Read backlight level sent from master and update level on slave
+    backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
+#endif
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif
--- a/keyboards/ergodash/mini/config.h
+++ b/keyboards/ergodash/mini/config.h
@@ -45,6 +45,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MATRIX_HAS_GHOST

 #define C6_AUDIO
+#ifdef AUDIO_ENABLE
+  #define STARTUP_SONG SONG(STARTUP_SOUND)
+  #define GOODBYE_SONG SONG(GOODBYE_SOUND)
+#endif

 /* number of backlight levels */
 #ifdef BACKLIGHT_ENABLE
@@ -64,18 +68,23 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 20
-#define RGBLIGHT_SPLIT
-#define RGBLED_SPLIT { 10, 10 }    // Number of LEDs

-#define SOFT_SERIAL_PIN D0
-#define SELECT_SOFT_SERIAL_SPEED 1
-/*Sets the protocol speed when using serial communication*/
-//Speeds:
-//0: about 189kbps (Experimental only)
-//1: about 137kbps (default)
-//2: about 75kbps
-//3: about 39kbps
-//4: about 26kbps
-//5: about 20kbps
+#define RGBLED_NUM 20    // Number of LEDs
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
--- a/keyboards/ergodash/mini/keymaps/default/config.h
+++ b/keyboards/ergodash/mini/keymaps/default/config.h
@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #pragma once

-
 /* Use I2C or Serial, not both */

 #define USE_SERIAL
@@ -31,3 +30,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MASTER_LEFT
 // #define MASTER_RIGHT
 // #define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
--- a/keyboards/ergodash/mini/keymaps/default/rules.mk
+++ b/keyboards/ergodash/mini/keymaps/default/rules.mk
@@ -1,3 +0,0 @@
-BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = no
-AUDIO_ENABLE = no
--- a/keyboards/ergodash/mini/rules.mk
+++ b/keyboards/ergodash/mini/rules.mk
@@ -1,3 +1,2 @@
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
-AUDIO_ENABLE = no
--- a/keyboards/ergodash/readme.md
+++ b/keyboards/ergodash/readme.md
@@ -9,17 +9,16 @@ Hardware Availability: Order your own [yourself](https://github.com/omkbd/ErgoDa

 Make example for this keyboard (after setting up your build environment):

-    make ergodash/rev1:default
+    make ergodash/rev2:default

 See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

 Install Example: (for pro micro)
-    `make ergodash/rev1:default:avrdude`
-
+    `make ergodash/rev2:default:avrdude`
+  
 Note:  
-  "rev1" is for PCB ver 1.0,1.1,1.2  
-  **The original Rev 1 was owned only by the designer. Therefore, Rev1 has been removed. Since the current PCB is Rev1, we changed Rev2 to Rev1 to match the firmware version.**
-
+  "rev2" is for PCB ver 1.1,1.2  
+  "rev1" is from earlier pcb

 # Layout
 ![layout](https://github.com/omkbd/picture/blob/master/ergodash-layout.png)
--- a/keyboards/ergodash/rev1/config.h
+++ b/keyboards/ergodash/rev1/config.h
@@ -16,7 +16,8 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

-#pragma once
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H

 #include "config_common.h"

@@ -34,9 +35,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COLS 7

 // wiring of each half
-#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
-// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+#define MATRIX_ROW_PINS { D7, E6, B4, B5, D4 }
+#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order

 /* define tapping term */
 #define TAPPING_TERM 120
@@ -44,15 +45,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST

-#define C6_AUDIO
-
 /* number of backlight levels */
-#ifdef BACKLIGHT_ENABLE
-  #define BACKLIGHT_PIN B6
-  #define BACKLIGHT_LEVELS 7
-//  #define BACKLIGHT_BREATHING
-//  #define BREATHING_PERIOD 4
-#endif
+// #define BACKLIGHT_LEVELS 3

 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCING_DELAY 5
@@ -64,18 +58,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 24
-#define RGBLIGHT_SPLIT
-#define RGBLED_SPLIT { 12, 12 }    // Number of LEDs

-#define SOFT_SERIAL_PIN D0
-#define SELECT_SOFT_SERIAL_SPEED 1
-/*Sets the protocol speed when using serial communication*/
-//Speeds:
-//0: about 189kbps (Experimental only)
-//1: about 137kbps (default)
-//2: about 75kbps
-//3: about 39kbps
-//4: about 26kbps
-//5: about 20kbps
+#define RGBLED_NUM 24    // Number of LEDs
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- a/keyboards/ergodash/rev1/info.json
+++ b/keyboards/ergodash/rev1/info.json
@@ -1,13 +1,13 @@
 {
-  "keyboard_name": "ErgoDash rev2",
+  "keyboard_name": "ErgoDash rev1",
  "url": "",
  "maintainer": "qmk",
-  "width": 18,
+  "width": 16,
  "height": 6.25,
  "layouts": {
    "LAYOUT": {
-      "key_count": 70,
-      "layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.375}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.75}, {"label":"R00", "x":11, "y":0.75}, {"label":"R01", "x":12, "y":0.25}, {"label":"R02", "x":13, "y":0.125}, {"label":"R03", "x":14, "y":0}, {"label":"R04", "x":15, "y":0.125}, {"label":"R05", "x":16, "y":0.375}, {"label":"R06", "x":17, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.375}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.75}, {"label":"R10", "x":11, "y":1.75}, {"label":"R11", "x":12, "y":1.25}, {"label":"R12", "x":13, "y":1.125}, {"label":"R13", "x":14, "y":1}, {"label":"R14", "x":15, "y":1.125}, {"label":"R15", "x":16, "y":1.375}, {"label":"R16", "x":17, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.375}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6, "y":2.75}, {"label":"R20", "x":11, "y":2.75}, {"label":"R21", "x":12, "y":2.25}, {"label":"R22", "x":13, "y":2.125}, {"label":"R23", "x":14, "y":2}, {"label":"R24", "x":15, "y":2.125}, {"label":"R25", "x":16, "y":2.375}, {"label":"R26", "x":17, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.375}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":4, "y":3.125}, {"label":"L35", "x":5, "y":3.25}, {"label":"L36", "x":6.5, "y":4.25}, {"label":"R30", "x":10.5, "y":4.25}, {"label":"R31", "x":12, "y":3.25}, {"label":"R32", "x":13, "y":3.125}, {"label":"R33", "x":14, "y":3}, {"label":"R34", "x":15, "y":3.125}, {"label":"R35", "x":16, "y":3.375}, {"label":"R36", "x":17, "y":3.375}, {"label":"L40", "x":0, "y":4.375}, {"label":"L41", "x":1, "y":4.375}, {"label":"L42", "x":2, "y":4.125}, {"label":"L43", "x":3, "y":4}, {"label":"L44", "x":5.5, "y":5.25}, {"label":"L45", "x":6.5, "y":5.25}, {"label":"L46", "x":7.5, "y":4.25, "h":2}, {"label":"R40", "x":9.5, "y":4.25, "h":2}, {"label":"R41", "x":10.5, "y":5.25}, {"label":"R42", "x":11.5, "y":5.25}, {"label":"R43", "x":14, "y":4}, {"label":"R44", "x":15, "y":4.125}, {"label":"R45", "x":16, "y":4.375}, {"label":"R46", "x":17, "y":4.375}]
+      "key_count": 68,
+      "layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.375}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.75}, {"label":"R00", "x":9, "y":0.75}, {"label":"R01", "x":10, "y":0.25}, {"label":"R02", "x":11, "y":0.125}, {"label":"R03", "x":12, "y":0}, {"label":"R04", "x":13, "y":0.125}, {"label":"R05", "x":14, "y":0.375}, {"label":"R06", "x":15, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.375}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.75}, {"label":"R10", "x":9, "y":1.75}, {"label":"R11", "x":10, "y":1.25}, {"label":"R12", "x":11, "y":1.125}, {"label":"R13", "x":12, "y":1}, {"label":"R14", "x":13, "y":1.125}, {"label":"R15", "x":14, "y":1.375}, {"label":"R16", "x":15, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.375}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6, "y":2.75}, {"label":"R20", "x":9, "y":2.75}, {"label":"R21", "x":10, "y":2.25}, {"label":"R22", "x":11, "y":2.125}, {"label":"R23", "x":12, "y":2}, {"label":"R24", "x":13, "y":2.125}, {"label":"R25", "x":14, "y":2.375}, {"label":"R26", "x":15, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.375}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":4, "y":3.125}, {"label":"L35", "x":5, "y":3.25}, {"label":"L36", "x":6.5, "y":4.25}, {"label":"R30", "x":8.5, "y":4.25}, {"label":"R31", "x":10, "y":3.25}, {"label":"R32", "x":11, "y":3.125}, {"label":"R33", "x":12, "y":3}, {"label":"R34", "x":13, "y":3.125}, {"label":"R35", "x":14, "y":3.375}, {"label":"R36", "x":15, "y":3.375}, {"label":"LT0", "x":0, "y":4.375}, {"label":"LT1", "x":1, "y":4.375}, {"label":"LT2", "x":2, "y":4.125}, {"label":"LT3", "x":3, "y":4}, {"label":"LT4", "x":5.5, "y":5.25}, {"label":"LT5", "x":6.5, "y":5.25}, {"label":"RT0", "x":8.5, "y":5.25}, {"label":"RT1", "x":9.5, "y":5.25}, {"label":"RT2", "x":12, "y":4}, {"label":"RT3", "x":13, "y":4.125}, {"label":"RT4", "x":14, "y":4.375}, {"label":"RT5", "x":15, "y":4.375}]
    }
  }
 }
--- a/keyboards/ergodash/rev1/keymaps/default/config.h
+++ b/keyboards/ergodash/rev1/keymaps/default/config.h
@@ -20,6 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #pragma once

+// place overrides here

 /* Use I2C or Serial, not both */

@@ -31,3 +32,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MASTER_LEFT
 // #define MASTER_RIGHT
 // #define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 24
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
--- a/keyboards/ergodash/rev1/keymaps/default/keymap.c
+++ b/keyboards/ergodash/rev1/keymaps/default/keymap.c
@@ -14,92 +14,92 @@ enum custom_keycodes {
  ADJUST,
 };

-#define EISU LALT(KC_GRV)
+#define KC_JPN LALT(KC_GRV)

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

  /* Qwerty
-   * ,----------------------------------------------------------------------------------------------------------------------.
-   * | ESC  |   1  |   2  |   3  |   4  |   5  |   [  |                    |   ]  |   6  |   7  |   8  |   9  |   0  |Pscree|
-   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
-   * |  `   |   Q  |   W  |   E  |   R  |   T  |   -  |                    |   =  |   Y  |   U  |   I  |   O  |   P  |  \   |
-   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
-   * | Tab  |   A  |   S  |   D  |   F  |   G  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   ;  |  "   |
-   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * | Shift|   Z  |   X  |   C  |   V  |   B  | Space|                    | Enter|   N  |   M  |   ,  |   .  |   /  | Shift|
-   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|  Del |||||||| Bksp | Enter| Raise|||||||| Left | Down |  Up  | Right|
-   * ,----------------------------------------------------------------------------------------------------------------------.
+   * ,-------------------------------------------------------------------------------------------------.
+   * | ESC  |   1  |   2  |   3  |   4  |   5  |   [  |   ]  |   6  |   7  |   8  |   9  |   0  | Caps |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |  `   |   Q  |   W  |   E  |   R  |   T  |   -  |   =  |   Y  |   U  |   I  |   O  |   P  |  \   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Tab  |   A  |   S  |   D  |   F  |   G  |  Del | Bksp |   H  |   J  |   K  |   L  |   ;  |  "   |
+   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |  JPN | Enter|   N  |   M  |   ,  |   .  |   /  | Shift|
+   * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
+   * | Ctrl |  GUI |  ALt |Adjust|      |Lower | Space |Enter |Raise|      |  Left| Down |  Up  | Right|
+   * ,-------------------------------------------------------------------------------------------------.
   */
  [_QWERTY] = LAYOUT( \
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LBRC,                        KC_RBRC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_PSCR, \
-    KC_GRV,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_MINS,                        KC_EQL , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS, \
-    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,KC_DEL,         KC_BSPC,KC_ENT , RAISE,            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LBRC,       KC_RBRC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_CAPS, \
+    KC_GRV,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_MINS,       KC_EQL , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS, \
+    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_DEL ,       KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_JPN ,       KC_ENT , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC ,       KC_ENT , RAISE,            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
  ),

  /* Lower
-   * ,----------------------------------------------------------------------------------------------------------------------.
-   * |  F11 |  F1  |  F2  |  F3  |  F4  |  F5  |   {  |                    |   }  |  F6  |  F7  |  F8  |  F9  |  F10 |  F12 |
-   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
-   * |  ~   |   !  |   @  |   #  |   $  |   %  |   _  |                    |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
-   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
-   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
-   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
-   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|  Del |||||||| Bksp | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
-   * ,----------------------------------------------------------------------------------------------------------------------.
+   * ,-------------------------------------------------------------------------------------------------.
+   * | F11  |  F1  |  F2  |  F3  |  F4  |  F5  |   {  |   }  |  F6  |  F7  |  F8  |  F9  |  F10 | F12  |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |  ~   |   !  |   @  |   #  |   $  |   %  |   _  |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
+   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+   * | Shift|   6  |   7  |   8  |   9  |   0  |  JPN | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+   * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
+   * | Ctrl |  GUI |  ALt |Adjust|      |Lower | Space |Enter |Raise|      | Home |PageDn|PageUp|  End |
+   * ,-------------------------------------------------------------------------------------------------.
   */
  [_LOWER] = LAYOUT(
-    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
-    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
-    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
-    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,KC_DEL,         KC_BSPC,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,       KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,       KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
+    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,       KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
+    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_JPN ,       KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC ,       KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
  ),

  /* Raise
-   * ,----------------------------------------------------------------------------------------------------------------------.
-   * |  F11 |  F1  |  F2  |  F3  |  F4  |  F5  |   {  |                    |   }  |  F6  |  F7  |  F8  |  F9  |  F10 |  F12 |
-   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
-   * |  ~   |   !  |   @  |   #  |   $  |   %  |   _  |                    |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
-   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
-   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
-   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
-   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|  Del |||||||| Bksp | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
-   * ,----------------------------------------------------------------------------------------------------------------------.
+   * ,-------------------------------------------------------------------------------------------------.
+   * | F11  |  F1  |  F2  |  F3  |  F4  |  F5  |   {  |   }  |  F6  |  F7  |  F8  |  F9  |  F10 | F12  |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |  ~   |   !  |   @  |   #  |   $  |   %  |   _  |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
+   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+   * | Shift|   6  |   7  |   8  |   9  |   0  |  JPN | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+   * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
+   * | Ctrl |  GUI |  ALt |Adjust|      |Lower | Space |Enter |Raise|      | Home |PageDn|PageUp|  End |
+   * ,-------------------------------------------------------------------------------------------------.
   */
  [_RAISE] = LAYOUT(
-    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
-    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
-    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
-    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
-    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,KC_DEL,         KC_BSPC,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,       KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,       KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
+    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,       KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
+    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_JPN ,       KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, ADJUST,           LOWER,   KC_SPC ,       KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
  ),

  /* Adjust
-   * ,----------------------------------------------------------------------------------------------------------------------.
-   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
-   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * |      | Reset|RGB ON|  MODE|  HUE-|  HUE+|      |                    |      |  SAT-|  SAT+|  VAL-|  VAL+|      |      |
-   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * |      |      | BL ON|  BRTG|  INC|   DEC|      |                    |      |      |      |      |      |      |      |
-   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
-   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
-   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
-   * |      |      |      |      ||||||||      |      |      ||||||||      |      |      ||||||||      |      |      |      |
-   * ,----------------------------------------------------------------------------------------------------------------------.
+   * ,-------------------------------------------------------------------------------------------------.
+   * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      | Reset|RGB ON|  MODE|  HUE-|  HUE+|      |      |  SAT-|  SAT+|  VAL-|  VAL+|      |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+   * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
+   * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+   * ,-------------------------------------------------------------------------------------------------.
   */
  [_ADJUST] = LAYOUT(
-    _______, _______, _______, _______, _______, _______,_______,                       _______, _______, _______, _______, _______, _______, _______, \
-    _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI,_______,                       _______, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
-    _______, _______, BL_TOGG, BL_BRTG, BL_INC , BL_DEC ,_______,                       _______, _______, _______, _______, _______, _______, _______, \
-    _______, _______, _______, _______, _______, _______,_______,                       _______, _______, _______, _______, _______, _______, _______, \
-    _______, _______, _______, _______,          _______,_______,_______,       _______,_______, _______,          _______, _______, _______, _______  \
+    _______, _______, _______, _______, _______, _______,_______,       _______, _______, _______, _______, _______, _______, _______, \
+    _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI,_______,       _______, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
+    _______, _______, _______, _______, _______, _______,_______,       _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______,_______,       _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______,          _______,_______,       _______, _______,          _______, _______, _______, _______ \
  )
 };

--- a/keyboards/ergodash/rev1/keymaps/default/rules.mk
+++ b/keyboards/ergodash/rev1/keymaps/default/rules.mk
@@ -1,3 +0,0 @@
-BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = no
-AUDIO_ENABLE = no
--- a/keyboards/ergodash/rev1/rev1.h
+++ b/keyboards/ergodash/rev1/rev1.h
@@ -25,19 +25,19 @@
 	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
 	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
 	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
-	L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46  \
+	LT0, LT1, LT2, LT3,      LT4, LT5, RT0, RT1,      RT2, RT3, RT4, RT5  \
 	) \
 	{ \
-		{ L00, L01, L02, L03, L04, L05, L06 }, \
-		{ L10, L11, L12, L13, L14, L15, L16 }, \
-		{ L20, L21, L22, L23, L24, L25, L26 }, \
-		{ L30, L31, L32, L33, L34, L35, L36 }, \
-		{ L40, L41, L42, L43, L44, L45, L46 }, \
-		{ R06, R05, R04, R03, R02, R01, R00 }, \
-		{ R16, R15, R14, R13, R12, R11, R10 }, \
-		{ R26, R25, R24, R23, R22, R21, R20 }, \
-		{ R36, R35, R34, R33, R32, R31, R30 }, \
-		{ R46, R45, R44, R43, R42, R41, R40 }  \
+		{ L00, L01, L02, L03, L04, L05, L06   }, \
+		{ L10, L11, L12, L13, L14, L15, L16   }, \
+		{ L20, L21, L22, L23, L24, L25, L26   }, \
+		{ L30, L31, L32, L33, L34, L35, L36   }, \
+		{ LT0, LT1, LT2, LT3, LT4, LT5, KC_NO }, \
+		{ R06, R05, R04, R03, R02, R01, R00   }, \
+		{ R16, R15, R14, R13, R12, R11, R10   }, \
+		{ R26, R25, R24, R23, R22, R21, R20   }, \
+		{ R36, R35, R34, R33, R32, R31, R30   }, \
+		{ RT5, RT4, RT3, RT2, RT1, RT0, KC_NO } \
 	}
 #else
 // Keymap with right side flipped
@@ -47,19 +47,19 @@
 	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
 	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
 	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
-	L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46  \
+	LT0, LT1, LT2, LT3,      LT4, LT5, RT0, RT1,      RT2, RT3, RT4, RT5  \
 	) \
 	{ \
-		{ L00, L01, L02, L03, L04, L05, L06 }, \
-		{ L10, L11, L12, L13, L14, L15, L16 }, \
-		{ L20, L21, L22, L23, L24, L25, L26 }, \
-		{ L30, L31, L32, L33, L34, L35, L36 }, \
-		{ L40, L41, L42, L43, L44, L45, L46 }, \
-		{ R00, R01, R02, R03, R04, R05, R06 }, \
-		{ R10, R11, R12, R13, R14, R15, R16 }, \
-		{ R20, R21, R22, R23, R24, R25, R26 }, \
-		{ R30, R31, R32, R33, R34, R35, R36 }, \
-		{ R40, R41, R42, R43, R44, R45, R46 }  \
+		{ L00, L01, L02, L03, L04, L05, L06   }, \
+		{ L10, L11, L12, L13, L14, L15, L16   }, \
+		{ L20, L21, L22, L23, L24, L25, L26   }, \
+		{ L30, L31, L32, L33, L34, L35, L36   }, \
+		{ LT0, LT1, LT2, LT3, LT4, LT5, KC_NO }, \
+		{ R00, R01, R02, R03, R04, R05, R06   }, \
+		{ R10, R11, R12, R13, R14, R15, R16   }, \
+		{ R20, R21, R22, R23, R24, R25, R26   }, \
+		{ R30, R31, R32, R33, R34, R35, R36   }, \
+		{ RT0, RT1, RT2, RT3, RT4, RT5, KC_NO } \
 	}
 #endif

--- a/keyboards/ergodash/rev1/rules.mk
+++ b/keyboards/ergodash/rev1/rules.mk
@@ -1,3 +1 @@
 BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = no
-AUDIO_ENABLE = no
--- a/keyboards/ergodash/rev2/config.h
+++ b/keyboards/ergodash/rev2/config.h
@@ -0,0 +1,89 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV2_CONFIG_H
+#define REV2_CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Omkbd
+#define PRODUCT         ErgoDash
+#define DESCRIPTION     Power
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+#define C6_AUDIO
+
+/* number of backlight levels */
+#ifdef BACKLIGHT_ENABLE
+  #define BACKLIGHT_PIN B6
+  #define BACKLIGHT_LEVELS 7
+//  #define BACKLIGHT_BREATHING
+//  #define BREATHING_PERIOD 4
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+
+#define RGBLED_NUM 24    // Number of LEDs
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- a/keyboards/ergodash/rev2/info.json
+++ b/keyboards/ergodash/rev2/info.json
@@ -0,0 +1,13 @@
+{
+  "keyboard_name": "ErgoDash rev2",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 18,
+  "height": 6.25,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 70,
+      "layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.375}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.75}, {"label":"R00", "x":11, "y":0.75}, {"label":"R01", "x":12, "y":0.25}, {"label":"R02", "x":13, "y":0.125}, {"label":"R03", "x":14, "y":0}, {"label":"R04", "x":15, "y":0.125}, {"label":"R05", "x":16, "y":0.375}, {"label":"R06", "x":17, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.375}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.75}, {"label":"R10", "x":11, "y":1.75}, {"label":"R11", "x":12, "y":1.25}, {"label":"R12", "x":13, "y":1.125}, {"label":"R13", "x":14, "y":1}, {"label":"R14", "x":15, "y":1.125}, {"label":"R15", "x":16, "y":1.375}, {"label":"R16", "x":17, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.375}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6, "y":2.75}, {"label":"R20", "x":11, "y":2.75}, {"label":"R21", "x":12, "y":2.25}, {"label":"R22", "x":13, "y":2.125}, {"label":"R23", "x":14, "y":2}, {"label":"R24", "x":15, "y":2.125}, {"label":"R25", "x":16, "y":2.375}, {"label":"R26", "x":17, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.375}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":4, "y":3.125}, {"label":"L35", "x":5, "y":3.25}, {"label":"L36", "x":6.5, "y":4.25}, {"label":"R30", "x":10.5, "y":4.25}, {"label":"R31", "x":12, "y":3.25}, {"label":"R32", "x":13, "y":3.125}, {"label":"R33", "x":14, "y":3}, {"label":"R34", "x":15, "y":3.125}, {"label":"R35", "x":16, "y":3.375}, {"label":"R36", "x":17, "y":3.375}, {"label":"L40", "x":0, "y":4.375}, {"label":"L41", "x":1, "y":4.375}, {"label":"L42", "x":2, "y":4.125}, {"label":"L43", "x":3, "y":4}, {"label":"L44", "x":5.5, "y":5.25}, {"label":"L45", "x":6.5, "y":5.25}, {"label":"L46", "x":7.5, "y":4.25, "h":2}, {"label":"R40", "x":9.5, "y":4.25, "h":2}, {"label":"R41", "x":10.5, "y":5.25}, {"label":"R42", "x":11.5, "y":5.25}, {"label":"R43", "x":14, "y":4}, {"label":"R44", "x":15, "y":4.125}, {"label":"R45", "x":16, "y":4.375}, {"label":"R46", "x":17, "y":4.375}]
+    }
+  }
+}
--- a/keyboards/ergodash/rev2/keymaps/default/config.h
+++ b/keyboards/ergodash/rev2/keymaps/default/config.h
@@ -0,0 +1,42 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// place overrides here
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 24
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
--- a/keyboards/ergodash/rev2/keymaps/default/keymap.c
+++ b/keyboards/ergodash/rev2/keymaps/default/keymap.c
@@ -0,0 +1,154 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * | ESC  |   1  |   2  |   3  |   4  |   5  |   [  |                    |   ]  |   6  |   7  |   8  |   9  |   0  |Pscree|
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * |  `   |   Q  |   W  |   E  |   R  |   T  |   -  |                    |   =  |   Y  |   U  |   I  |   O  |   P  |  \   |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * | Tab  |   A  |   S  |   D  |   F  |   G  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   ;  |  "   |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  | Space|                    | Enter|   N  |   M  |   ,  |   .  |   /  | Shift|
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Left | Down |  Up  | Right|
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   */
+  [_QWERTY] = LAYOUT( \
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_LBRC,                        KC_RBRC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_PSCR, \
+    KC_GRV,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_MINS,                        KC_EQL , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS, \
+    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,KC_SPC,          KC_SPC,KC_ENT , RAISE,            KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+  ),
+
+  /* Lower
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * |  F11 |  F1  |  F2  |  F3  |  F4  |  F5  |   {  |                    |   }  |  F6  |  F7  |  F8  |  F9  |  F10 |  F12 |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * |  ~   |   !  |   @  |   #  |   $  |   %  |   _  |                    |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   */
+  [_LOWER] = LAYOUT(
+    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
+    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
+    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,KC_SPC,          KC_SPC,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+  ),
+
+  /* Raise
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * |  F11 |  F1  |  F2  |  F3  |  F4  |  F5  |   {  |                    |   }  |  F6  |  F7  |  F8  |  F9  |  F10 |  F12 |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * |  ~   |   !  |   @  |   #  |   $  |   %  |   _  |                    |   +  |   ^  |   &  |   *  |   (  |   )  |  |   |
+   * |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------|
+   * | Tab  |   1  |   2  |   3  |   4  |   5  |  Del |                    | Bksp |   H  |   J  |   K  |   L  |   :  |  "   |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * | Shift|   6  |   7  |   8  |   9  |   0  | Space|                    | Enter|   N  |   M  |   <  |   >  |   ?  | Shift|
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * | Ctrl |  GUI |  ALt | EISU |||||||| Lower| Space|      ||||||||      | Enter| Raise|||||||| Home |PageDn|PageUp|  End |
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   */
+  [_RAISE] = LAYOUT(
+    KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCBR,                        KC_RCBR, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12,  \
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_UNDS,                        KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
+    KC_TAB,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL ,                        KC_BSPC, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_DQT , \
+    KC_LSFT, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SPC ,                        KC_ENT , KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, EISU,             LOWER,   KC_SPC ,KC_SPC,          KC_SPC,KC_ENT , RAISE,            KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+  ),
+
+  /* Adjust
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * |      | Reset|RGB ON|  MODE|  HUE-|  HUE+|      |                    |      |  SAT-|  SAT+|  VAL-|  VAL+|      |      |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |                    |      |      |      |      |      |      |      |
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------|
+   * |      |      |      |      ||||||||      |      |      ||||||||      |      |      ||||||||      |      |      |      |
+   * ,----------------------------------------------------------------------------------------------------------------------.
+   */
+  [_ADJUST] = LAYOUT(
+    _______, _______, _______, _______, _______, _______,_______,                       _______, _______, _______, _______, _______, _______, _______, \
+    _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI,_______,                       _______, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
+    _______, _______, BL_TOGG, BL_BRTG, BL_INC , BL_DEC ,_______,                       _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______,_______,                       _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______,          _______,_______,_______,       _______,_______, _______,          _______, _______, _______, _______  \
+  )
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+         print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
--- a/keyboards/ergodash/rev2/keymaps/default/rules.mk
+++ b/keyboards/ergodash/rev2/keymaps/default/rules.mk
--- a/keyboards/ergodash/rev2/keymaps/greenshadowmaker/config.h
+++ b/keyboards/ergodash/rev2/keymaps/greenshadowmaker/config.h
@@ -31,3 +31,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MASTER_LEFT
 // #define MASTER_RIGHT
 // #define EE_HANDS
+
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 24
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
--- a/keyboards/ergodash/rev2/keymaps/greenshadowmaker/keyboard-layout-editor.json
+++ b/keyboards/ergodash/rev2/keymaps/greenshadowmaker/keyboard-layout-editor.json
--- a/keyboards/ergodash/rev2/keymaps/greenshadowmaker/keymap.c
+++ b/keyboards/ergodash/rev2/keymaps/greenshadowmaker/keymap.c
--- a/keyboards/ergodash/rev2/keymaps/greenshadowmaker/rules.mk
+++ b/keyboards/ergodash/rev2/keymaps/greenshadowmaker/rules.mk
--- a/keyboards/ergodash/rev2/rev2.c
+++ b/keyboards/ergodash/rev2/rev2.c
@@ -0,0 +1,39 @@
+#include "ergodash.h"
+
+#ifdef AUDIO_ENABLE
+    float tone_startup[][2] = SONG(STARTUP_SOUND);
+    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+
+    #ifdef AUDIO_ENABLE
+        _delay_ms(20); // gets rid of tick
+        PLAY_SONG(tone_startup);
+    #endif
+
+    // // green led on
+    // DDRD |= (1<<5);
+    // PORTD &= ~(1<<5);
+
+    // // orange led on
+    // DDRB |= (1<<0);
+    // PORTB &= ~(1<<0);
+
+	matrix_init_user();
+};
+
+void shutdown_user(void) {
+    #ifdef AUDIO_ENABLE
+        PLAY_SONG(tone_goodbye);
+	_delay_ms(150);
+	stop_all_notes();
+    #endif
+}
--- a/keyboards/ergodash/rev2/rev2.h
+++ b/keyboards/ergodash/rev2/rev2.h
@@ -0,0 +1,66 @@
+#ifndef REV1_H
+#define REV1_H
+
+#include "ergodash.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+	#include <avr/io.h>
+	#include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#ifndef FLIP_HALF
+// Standard Keymap
+// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
+#define LAYOUT( \
+	L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
+	L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46  \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05, L06 }, \
+		{ L10, L11, L12, L13, L14, L15, L16 }, \
+		{ L20, L21, L22, L23, L24, L25, L26 }, \
+		{ L30, L31, L32, L33, L34, L35, L36 }, \
+		{ L40, L41, L42, L43, L44, L45, L46 }, \
+		{ R06, R05, R04, R03, R02, R01, R00 }, \
+		{ R16, R15, R14, R13, R12, R11, R10 }, \
+		{ R26, R25, R24, R23, R22, R21, R20 }, \
+		{ R36, R35, R34, R33, R32, R31, R30 }, \
+		{ R46, R45, R44, R43, R42, R41, R40 }  \
+	}
+#else
+// Keymap with right side flipped
+// (TRRS jack on both halves are to the right)
+#define LAYOUT( \
+	L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
+	L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46  \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05, L06 }, \
+		{ L10, L11, L12, L13, L14, L15, L16 }, \
+		{ L20, L21, L22, L23, L24, L25, L26 }, \
+		{ L30, L31, L32, L33, L34, L35, L36 }, \
+		{ L40, L41, L42, L43, L44, L45, L46 }, \
+		{ R00, R01, R02, R03, R04, R05, R06 }, \
+		{ R10, R11, R12, R13, R14, R15, R16 }, \
+		{ R20, R21, R22, R23, R24, R25, R26 }, \
+		{ R30, R31, R32, R33, R34, R35, R36 }, \
+		{ R40, R41, R42, R43, R44, R45, R46 }  \
+	}
+#endif
+
+#endif
--- a/keyboards/ergodash/rev2/rules.mk
+++ b/keyboards/ergodash/rev2/rules.mk
@@ -0,0 +1,2 @@
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no
--- a/keyboards/ergodash/rules.mk
+++ b/keyboards/ergodash/rules.mk
@@ -1,21 +1,52 @@
+SRC += matrix.c \
+	   i2c.c \
+	   split_util.c \
+	   serial.c \
+	   ssd1306.c
+
 # MCU name
+#MCU = at90usb1287
 MCU = atmega32u4

 # Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
 F_CPU = 16000000

+#
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
 ARCH = AVR8

 # Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)

 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT

 # Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = caterina

 # Build Options
@@ -26,17 +57,19 @@ BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
 MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
+SUBPROJECT_rev1 = yes
+USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

-SPLIT_KEYBOARD = yes       # Enables split keyboard support
+CUSTOM_MATRIX = yes

-DEFAULT_FOLDER = ergodash/rev1
+DEFAULT_FOLDER = ergodash/rev2
--- a/keyboards/ergodash/serial.c
+++ b/keyboards/ergodash/serial.c
@@ -0,0 +1,228 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifndef USE_I2C
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input();
+
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+  serial_input();
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+  serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+  serial_output();
+
+  serial_low();
+  serial_delay();
+
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+  uint8_t byte = 0;
+  serial_input();
+  for ( uint8_t i = 0; i < 8; ++i) {
+    byte = (byte << 1) | serial_read_pin();
+    serial_delay();
+    _delay_us(1);
+  }
+
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+  uint8_t b = 8;
+  serial_output();
+  while( b-- ) {
+    if(data & (1 << b)) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    serial_delay();
+  }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  sync_send();
+
+  uint8_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_slave_buffer[i]);
+    sync_send();
+    checksum += serial_slave_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_send();
+
+  // wait for the sync to finish sending
+  serial_delay();
+
+  // read the middle of pulses
+  _delay_us(SERIAL_DELAY/2);
+
+  uint8_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_master_buffer[i] = serial_read_byte();
+    sync_send();
+    checksum_computed += serial_master_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_send();
+
+  serial_input(); // end transaction
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(1);
+
+  // wait for the slaves response
+  serial_input();
+  serial_high();
+  _delay_us(SERIAL_DELAY);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    sei();
+    return 1;
+  }
+
+  // if the slave is present syncronize with it
+  sync_recv();
+
+  uint8_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_slave_buffer[i] = serial_read_byte();
+    sync_recv();
+    checksum_computed += serial_slave_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_recv();
+
+  if (checksum_computed != checksum_received) {
+    sei();
+    return 1;
+  }
+
+  uint8_t checksum = 0;
+  // send data to the slave
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_master_buffer[i]);
+    sync_recv();
+    checksum += serial_master_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_recv();
+
+  // always, release the line when not in use
+  serial_output();
+  serial_high();
+
+  sei();
+  return 0;
+}
+
+#endif
--- a/keyboards/ergodash/serial.h
+++ b/keyboards/ergodash/serial.h
@@ -0,0 +1,26 @@
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include <stdbool.h>
+
+/* TODO:  some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif
--- a/keyboards/ergodash/split_util.c
+++ b/keyboards/ergodash/split_util.c
@@ -0,0 +1,86 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+#include "timer.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else
+#  include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+  #ifdef EE_HANDS
+    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #else
+    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+      isLeftHand = !has_usb();
+    #else
+      isLeftHand = has_usb();
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+#ifdef USE_I2C
+    i2c_master_init();
+#ifdef SSD1306OLED
+    matrix_master_OLED_init ();
+#endif
+#else
+    serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+  timer_init();
+#ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+    serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (has_usb()) {
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+void keyboard_slave_loop(void) {
+   matrix_init();
+
+   while (1) {
+      matrix_slave_scan();
+   }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+
+    if (!has_usb()) {
+        keyboard_slave_loop();
+    }
+}
--- a/keyboards/ergodash/split_util.h
+++ b/keyboards/ergodash/split_util.h
@@ -0,0 +1,20 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+#include "eeconfig.h"
+
+#define SLAVE_I2C_ADDRESS           0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+void matrix_master_OLED_init (void);
+
+#endif
--- a/keyboards/kbdfans/kbd67/rev1/keymaps/default/readme.md
+++ b/keyboards/kbdfans/kbd67/rev1/keymaps/default/readme.md
@@ -1,33 +1 @@
 # The default keymap for kbd67
-
-```
-/* Keymap (Base Layer) Default Layer
- * ,----------------------------------------------------------------.
- * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |Home|
- * |----------------------------------------------------------------|
- * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |PgUp|
- * |----------------------------------------------------------------|
- * |Ctrl   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgDn|
- * |----------------------------------------------------------------|
- * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|End |
- * |----------------------------------------------------------------|
- * |Ctrl|Win |Alt |        Space          |Alt| FN|Ctrl|Lef|Dow|Rig |
- * `----------------------------------------------------------------'
- */
-```
-
-```
-  /* Keymap Fn Layer
-   * ,----------------------------------------------------------------.
-   * |~ `|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |Ins |
-   * |----------------------------------------------------------------|
-   * |Caps |   |Up |   |   |   |   |   |PSc|SLk|Pau|Up |   |     |    |
-   * |----------------------------------------------------------------|
-   * |      |Lef|Dow|Rig|   |   |   |   |Hom|PUp|Lef|Rig|        |    |
-   * |----------------------------------------------------------------|
-   * |        |   |   |   |   |   |   |   |End|PDn|Dow|      |PUp|    |
-   * |----------------------------------------------------------------|
-   * |    |    |    |                       |   |   |    |Hom|PDn|End |
-   * `----------------------------------------------------------------'
-   */
-```
--- a/keyboards/kbdfans/kbd67/rev1/keymaps/martinffx/config.h
+++ b/keyboards/kbdfans/kbd67/rev1/keymaps/martinffx/config.h
@@ -1,19 +0,0 @@
-/* Copyright 2018 MechMerlin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here
--- a/keyboards/kbdfans/kbd67/rev1/keymaps/martinffx/keymap.c
+++ b/keyboards/kbdfans/kbd67/rev1/keymaps/martinffx/keymap.c
@@ -1,99 +0,0 @@
-/* Copyright 2018 'mechmerlin'
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-// Defines the keycodes used by our macros in process_record_user
-enum custom_keycodes {
-  QMKBEST = SAFE_RANGE,
-  QMKURL
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Keymap (Base Layer) Default Layer
-   * ,----------------------------------------------------------------.
-   * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |   ~|
-   * |----------------------------------------------------------------|
-   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | Del|
-   * |----------------------------------------------------------------|
-   * |Ctrl   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgUp|
-   * |----------------------------------------------------------------|
-   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|PgDn|
-   * |----------------------------------------------------------------|
-   * |Ctrl|Win |Alt |        Space          |Alt| FN|Ctrl|Lef|Dow|Rig |
-   * `----------------------------------------------------------------'
-   */
-[0] = LAYOUT_65_ansi(
-  KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_GRAVE, \
-  KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE,\
-  KC_LCTL, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,  \
-  KC_LSFT, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_PGDN,  \
-  KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                          KC_RALT, MO(1),   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
-
-  /* Keymap Fn Layer
-   * ,----------------------------------------------------------------.
-   * |~ `|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |Ins |
-   * |----------------------------------------------------------------|
-   * |Caps |   |Up |   |   |   |   |   |PSc|SLk|Pau|Up |   |     |    |
-   * |----------------------------------------------------------------|
-   * |      |Lef|Dow|Rig|   |   |   |   |Hom|PUp|Lef|Rig|        |    |
-   * |----------------------------------------------------------------|
-   * |        |   |   |   |   |   |   |   |End|PDn|Dow|      |PUp|    |
-   * |----------------------------------------------------------------|
-   * |    |    |    |                       |   |   |    |Hom|PDn|End |
-   * `----------------------------------------------------------------'
-   */
-[1] = LAYOUT_65_ansi(
-   KC_GRV,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,          KC_DEL,KC_INS, \
-   KC_CAPS,_______,  KC_UP,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,  KC_UP,_______,     _______,_______,   \
-      _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,            _______,_______, \
-           _______,_______,_______,_______,_______,_______,_______,_______, KC_END,KC_PGDN,KC_DOWN,       _______,KC_PGUP,_______, \
-    _______,  _______,  _______,                     _______,                     _______,_______,_______,KC_HOME,KC_PGDN, KC_END),
-
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QMKBEST:
-      if (record->event.pressed) {
-        // when keycode QMKBEST is pressed
-        SEND_STRING("QMK is the best thing ever!");
-      } else {
-        // when keycode QMKBEST is released
-      }
-      break;
-    case QMKURL:
-      if (record->event.pressed) {
-        // when keycode QMKURL is pressed
-        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
-      } else {
-        // when keycode QMKURL is released
-      }
-      break;
-  }
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
--- a/keyboards/kbdfans/kbd67/rev1/keymaps/martinffx/readme.md
+++ b/keyboards/kbdfans/kbd67/rev1/keymaps/martinffx/readme.md
@@ -1,33 +0,0 @@
-# The default keymap for kbd67
-
-```
-/* Keymap (Base Layer) Default Layer
- * ,----------------------------------------------------------------.
- * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |   ~|
- * |----------------------------------------------------------------|
- * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | Del|
- * |----------------------------------------------------------------|
- * |Ctrl   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgUp|
- * |----------------------------------------------------------------|
- * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|PgDn|
- * |----------------------------------------------------------------|
- * |Ctrl|Win |Alt |        Space          |Alt| FN|Ctrl|Lef|Dow|Rig |
- * `----------------------------------------------------------------'
- */
-```
-
-```
-  /* Keymap Fn Layer
-   * ,----------------------------------------------------------------.
-   * |~ `|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |Ins |
-   * |----------------------------------------------------------------|
-   * |Caps |   |Up |   |   |   |   |   |PSc|SLk|Pau|Up |   |     |    |
-   * |----------------------------------------------------------------|
-   * |      |Lef|Dow|Rig|   |   |   |   |Hom|PUp|Lef|Rig|        |    |
-   * |----------------------------------------------------------------|
-   * |        |   |   |   |   |   |   |   |End|PDn|Dow|      |PUp|    |
-   * |----------------------------------------------------------------|
-   * |    |    |    |                       |   |   |    |Hom|PDn|End |
-   * `----------------------------------------------------------------'
-   */
-```
--- a/keyboards/moonlander/config.h
+++ b/keyboards/moonlander/config.h
@@ -0,0 +1,86 @@
+/*
+Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define MANUFACTURER    ZSA
+#define PRODUCT         Moonlander
+#define DESCRIPTION     A keyboard
+#define DEVICE_VER      0x0001
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 7
+
+/* Planck PCB default pin-out */
+// #define MATRIX_ROW_PINS { B10, B11, B12, B13, B14, B15 }
+// #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6 }
+
+// #define MCP23_ROW_PINS { GPB5, GBP4, GBP3, GBP2, GBP1, GBP0 }
+// #define MCP23_COL_PINS { GPA0, GBA1, GBA2, GBA3, GBA4, GBA5, GBA6 }
+
+// #define MCP23_LED_R GPB7
+// #define MCP23_LED_G GPB6
+// #define MCP23_LED_B GPA7
+
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define DRIVER_ADDR_1 0b1110100
+#define DRIVER_ADDR_2 0b1110111
+
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 35
+#define DRIVER_2_LED_TOTAL 35
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
--- a/keyboards/moonlander/keymaps/default/keymap.c
+++ b/keyboards/moonlander/keymaps/default/keymap.c
@@ -0,0 +1,70 @@
+/*
+Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "moonlander.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0] = LAYOUT_moonlander(
+  RGB_MOD, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,
+  KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,
+  KC_ESC, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,
+  KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,
+  MO(1),KC_LCTL,KC_LALT,KC_LGUI,KC_RALT,
+  KC_BSPC,KC_SPC, KC_ENT,
+
+  KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_BSPC,
+  KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_DEL,
+  KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,
+          KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_ENT,
+                  KC_RALT,KC_LGUI,KC_LALT,KC_LCTL,MO(2),
+                                   KC_ENT,KC_SPC, KC_BSPC
+),
+
+[1] = LAYOUT_moonlander(
+  RGB_MOD, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,
+  KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,
+  KC_ESC, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,
+  KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,
+  MO(1),KC_LCTL,KC_LALT,KC_LGUI,KC_RALT,
+  KC_BSPC,KC_SPC, KC_ENT,
+
+  KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_BSPC,
+  KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_DEL,
+  KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,
+          KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,
+                  KC_RALT,KC_LGUI,KC_LALT,KC_LCTL,MO(2),
+                                   KC_ENT,KC_SPC, KC_BSPC
+),
+
+[1] = LAYOUT_moonlander(
+  RGB_MOD, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,
+  KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,
+  KC_ESC, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,
+  KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,
+  MO(1),KC_LCTL,KC_LALT,KC_LGUI,KC_RALT,
+  KC_BSPC,KC_SPC, KC_ENT,
+
+  KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_BSPC,
+  KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_DEL,
+  KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,
+          KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,
+                  KC_RALT,KC_LGUI,KC_LALT,KC_LCTL,MO(2),
+                                   KC_ENT,KC_SPC, KC_BSPC
+)
+
+};
--- a/keyboards/moonlander/matrix.c
+++ b/keyboards/moonlander/matrix.c
@@ -0,0 +1,266 @@
+/*
+Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "hal.h"
+#include "timer.h"
+#include "wait.h"
+#include "printf.h"
+#include "backlight.h"
+#include "matrix.h"
+#include "action.h"
+#include "keycode.h"
+#include <string.h>
+#include "moonlander.h"
+#include "i2c_master.h"
+
+/*
+#define MATRIX_ROW_PINS { B10, B11, B12, B13, B14, B15 } outputs
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6 }   inputs
+ */
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[6];
+static matrix_row_t matrix_debouncing_right[MATRIX_COLS];
+static bool debouncing = false;
+static uint16_t debouncing_time = 0;
+static bool debouncing_right = false;
+static uint16_t debouncing_time_right = 0;
+
+extern bool mcp23018_leds[3];
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+  matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+  matrix_scan_user();
+}
+
+bool mcp23018_initd = false;
+uint8_t mcp23018_tx[3];
+uint8_t mcp23018_rx[1];
+
+void mcp23018_init(void) {
+
+    i2c_init();
+    i2c_start(MCP23018_DEFAULT_ADDRESS << 1);
+
+
+// #define MCP23_ROW_PINS { GPB5, GBP4, GBP3, GBP2, GBP1, GBP0 }       outputs
+// #define MCP23_COL_PINS { GPA0, GBA1, GBA2, GBA3, GBA4, GBA5, GBA6 } inputs
+
+    mcp23018_tx[0] = 0x00; // IODIRA
+    mcp23018_tx[1] = 0b00000000; // A is output
+    mcp23018_tx[2] = 0b00111111; // B is inputs
+
+    if (MSG_OK != i2c_transmit(MCP23018_DEFAULT_ADDRESS << 1,
+        mcp23018_tx, 3, 100
+    )) {
+        printf("error hori\n");
+    } else {
+        mcp23018_tx[0] = 0x0C; // GPPUA
+        mcp23018_tx[1] = 0b10000000; // A is not pulled-up
+        mcp23018_tx[2] = 0b11111111; // B is pulled-up
+
+        if (MSG_OK != i2c_transmit(MCP23018_DEFAULT_ADDRESS << 1,
+            mcp23018_tx, 3, 100
+        )) {
+            printf("error hori\n");
+        } else {
+            mcp23018_initd = true;
+        }
+    }
+}
+
+void matrix_init(void) {
+    printf("matrix init\n");
+    //debug_matrix = true;
+
+    // outputs
+    palSetPadMode(GPIOB, 10,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 11,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 12,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 13,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 14,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 15,  PAL_MODE_OUTPUT_PUSHPULL);
+
+    // inputs
+    palSetPadMode(GPIOA, 0, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 1, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 2, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 6, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 7, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOB, 0, PAL_MODE_INPUT_PULLDOWN);
+
+    memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+
+    mcp23018_init();
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+
+    matrix_row_t data = 0;
+    // actual matrix
+    for (int row = 0; row < 6; row++) {
+
+        // strobe row
+        switch (row) {
+            case 0: palSetPad(GPIOB, 10); break;
+            case 1: palSetPad(GPIOB, 11); break;
+            case 2: palSetPad(GPIOB, 12); break;
+            case 3: palSetPad(GPIOB, 13); break;
+            case 4: palSetPad(GPIOB, 14); break;
+            case 5: palSetPad(GPIOB, 15); break;
+        }
+
+        // need wait to settle pin state
+        wait_us(20);
+
+        // read col data
+        data = (
+            (palReadPad(GPIOA, 0) << 0 ) |
+            (palReadPad(GPIOA, 1) << 1 ) |
+            (palReadPad(GPIOA, 2) << 2 ) |
+            (palReadPad(GPIOA, 3) << 3 ) |
+            (palReadPad(GPIOA, 6) << 4 ) |
+            (palReadPad(GPIOA, 7) << 5 ) |
+            (palReadPad(GPIOB, 0) << 6 )
+        );
+
+        // unstrobe  row
+        switch (row) {
+            case 0: palClearPad(GPIOB, 10); break;
+            case 1: palClearPad(GPIOB, 11); break;
+            case 2: palClearPad(GPIOB, 12); break;
+            case 3: palClearPad(GPIOB, 13); break;
+            case 4: palClearPad(GPIOB, 14); break;
+            case 5: palClearPad(GPIOB, 15); break;
+        }
+
+        if (matrix_debouncing[row] != data) {
+            matrix_debouncing[row] = data;
+            debouncing = true;
+            debouncing_time = timer_read();
+        }
+    }
+
+
+    for (int row = 0; row < 7; row++) {
+        // right side
+
+        if (!mcp23018_initd) {
+            printf("trying to init right\n");
+            mcp23018_init();
+        }
+
+        // #define MCP23_ROW_PINS { GPB5, GBP4, GBP3, GBP2, GBP1, GBP0 }       outputs
+        // #define MCP23_COL_PINS { GPA0, GBA1, GBA2, GBA3, GBA4, GBA5, GBA6 } inputs
+
+        // select row
+
+        mcp23018_tx[0] = 0x12; // GPIOA
+        mcp23018_tx[1] = (0b01111111 & ~(1<<(row))) | ((uint8_t)!mcp23018_leds[2] << 7); // activate row
+        mcp23018_tx[2] = ((uint8_t)!mcp23018_leds[1] << 6) | ((uint8_t)!mcp23018_leds[0] << 7); // activate row
+
+        if (MSG_OK != i2c_transmit(MCP23018_DEFAULT_ADDRESS << 1,
+            mcp23018_tx, 3, 100
+        )) {
+            printf("error hori\n");
+        }
+
+        // read col
+
+        mcp23018_tx[0] = 0x13; // GPIOB
+
+        if (MSG_OK != i2c_transmit_receive(MCP23018_DEFAULT_ADDRESS << 1,
+            mcp23018_tx, 1,
+            mcp23018_rx, 1
+        )) {
+            printf("error vert\n");
+        }
+
+        data = ~(mcp23018_rx[0] & 0b00111111);
+        // data = 0x01;
+
+        if (matrix_debouncing_right[row] != data) {
+            matrix_debouncing_right[row] = data;
+            debouncing_right = true;
+            debouncing_time_right = timer_read();
+        }
+    }
+
+
+    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCING_DELAY) {
+        for (int row = 0; row < 6; row++) {
+            matrix[row] = matrix_debouncing[row];
+        }
+        debouncing = false;
+    }
+
+    if (debouncing_right && timer_elapsed(debouncing_time_right) > DEBOUNCING_DELAY) {
+        for (int row = 0; row < 6; row++) {
+            matrix[11 - row] = 0;
+            for (int col = 0; col < MATRIX_COLS; col++) {
+                matrix[11 - row] |= ((matrix_debouncing_right[6 - col] & (1 << row) ? 1 : 0) << col);
+            }
+        }
+        debouncing_right = false;
+    }
+
+    matrix_scan_quantum();
+
+    return 1;
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col) {
+    return (matrix[row] & (1<<col));
+}
+
+matrix_row_t matrix_get_row(uint8_t row) {
+    return matrix[row];
+}
+
+void matrix_print(void) {
+    printf("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        printf("%X0: ", row);
+        matrix_row_t data = matrix_get_row(row);
+        for (int col = 0; col < MATRIX_COLS; col++) {
+            if (data & (1<<col))
+                printf("1");
+            else
+                printf("0");
+        }
+        printf("\n");
+    }
+}
--- a/keyboards/moonlander/moonlander.c
+++ b/keyboards/moonlander/moonlander.c
@@ -0,0 +1,266 @@
+/*
+Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "moonlander.h"
+
+bool mcp23018_leds[3] = {0, 0, 0};
+
+void matrix_init_kb(void) {
+  setPinOutput(B5);
+  setPinOutput(B4);
+  setPinOutput(B3);
+
+  writePinLow(B5);
+  writePinLow(B4);
+  writePinLow(B3);
+
+  mcp23018_leds[0] = 0; // blue
+  mcp23018_leds[1] = 0; // green
+  mcp23018_leds[2] = 0; // red
+
+  eeconfig_init();
+}
+
+void matrix_scan_kb(void) {
+
+}
+
+uint32_t layer_state_set_kb(uint32_t state) {
+  ML_LED_1(0);
+  ML_LED_2(0);
+  ML_LED_3(0);
+  ML_LED_4(0);
+  ML_LED_5(0);
+  ML_LED_6(0);
+
+  uint8_t layer = biton32(state);
+  switch (layer) {
+      case 0:
+        break;
+      case 1:
+        ML_LED_1(1);
+        ML_LED_4(1);
+        break;
+      case 2:
+        ML_LED_2(1);
+        ML_LED_5(1);
+        break;
+      case 3:
+        ML_LED_3(1);
+        break;
+      case 4:
+        ML_LED_4(1);
+        break;
+      case 5:
+        ML_LED_5(1);
+        break;
+      case 6:
+        ML_LED_6(1);
+        break;
+      default:
+        break;
+    }
+
+  return state;
+}
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ *   driver
+ *   |  R location
+ *   |  |      G location
+ *   |  |      |      B location
+ *   |  |      |      | */
+    {0, C3_2,  C1_1,  C4_2}, // 1
+    {0, C2_2,  C1_2,  C4_3},
+    {0, C2_3,  C1_3,  C3_3},
+    {0, C2_4,  C1_4,  C3_4},
+    {0, C2_5,  C1_5,  C3_5},
+    {0, C2_6,  C1_6,  C3_6},
+    {0, C2_7,  C1_7,  C3_7},
+    {0, C2_8,  C1_8,  C3_8},
+    {0, C3_1,  C2_1,  C4_1},
+
+    {0, C7_8,  C6_8,  C8_8}, // 10
+    {0, C7_7,  C6_7,  C9_8},
+    {0, C8_7,  C6_6,  C9_7},
+    {0, C8_6,  C7_6,  C9_6},
+    {0, C8_5,  C7_5,  C9_5},
+    {0, C8_4,  C7_4,  C9_4},
+    {0, C8_3,  C7_3,  C9_3},
+    {0, C8_2,  C7_2,  C9_2},
+    {0, C8_1,  C7_1,  C9_1},
+
+    {0, C3_10,  C1_9,   C4_10}, // 19
+    {0, C2_10,  C1_10,  C4_11},
+    {0, C2_11,  C1_11,  C3_11},
+    {0, C2_12,  C1_12,  C3_12},
+    {0, C2_13,  C1_13,  C3_13},
+    {0, C2_14,  C1_14,  C3_14},
+    {0, C2_15,  C1_15,  C3_15},
+    {0, C2_16,  C1_16,  C3_16},
+    {0, C3_9,   C2_9,   C4_9},
+
+    {0, C7_16,  C6_16,  C8_16}, // 28
+    {0, C7_15,  C6_15,  C9_16},
+    {0, C8_15,  C6_14,  C9_15},
+    {0, C8_10,  C7_10,  C9_10},
+    {0, C8_9,   C7_9,   C9_9},
+    {0, C8_11,  C7_11,  C9_11},
+    {0, C8_12,  C7_12,  C9_12},
+    {0, C8_13,  C7_13,  C9_13},
+//    {0, C8_14,  C7_14,  C9_4}
+
+    {1, C3_2,  C1_1,  C4_2}, // 1
+    {1, C2_2,  C1_2,  C4_3},
+    {1, C2_3,  C1_3,  C3_3},
+    {1, C2_4,  C1_4,  C3_4},
+    {1, C2_5,  C1_5,  C3_5},
+    {1, C2_6,  C1_6,  C3_6},
+    {1, C2_7,  C1_7,  C3_7},
+    {1, C2_8,  C1_8,  C3_8},
+    {1, C3_1,  C2_1,  C4_1},
+
+    {1, C7_8,  C6_8,  C8_8}, // 10
+    {1, C7_7,  C6_7,  C9_8},
+    {1, C8_7,  C6_6,  C9_7},
+    {1, C8_6,  C7_6,  C9_6},
+    {1, C8_5,  C7_5,  C9_5},
+    {1, C8_4,  C7_4,  C9_4},
+    {1, C8_3,  C7_3,  C9_3},
+    {1, C8_2,  C7_2,  C9_2},
+    {1, C8_1,  C7_1,  C9_1},
+
+    {1, C3_10,  C1_9,   C4_10}, // 19
+    {1, C2_10,  C1_10,  C4_11},
+    {1, C2_11,  C1_11,  C3_11},
+    {1, C2_12,  C1_12,  C3_12},
+    {1, C2_13,  C1_13,  C3_13},
+    {1, C2_14,  C1_14,  C3_14},
+    {1, C2_15,  C1_15,  C3_15},
+    {1, C2_16,  C1_16,  C3_16},
+    {1, C3_9,   C2_9,   C4_9},
+
+    {1, C7_16,  C6_16,  C8_16}, // 28
+    {1, C7_15,  C6_15,  C9_16},
+    {1, C8_15,  C6_14,  C9_15},
+    {1, C8_10,  C7_10,  C9_10},
+    {1, C8_9,   C7_9,   C9_9},
+    {1, C8_11,  C7_11,  C9_11},
+    {1, C8_12,  C7_12,  C9_12},
+    {1, C8_13,  C7_13,  C9_13},
+
+};
+
+rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+
+    /*{row | col << 4}
+      |             {x=0..224, y=0..64}
+      |              |                 modifier
+      |              |                 | */
+    {{0|(0<<4)},   {17.23*0, 21.33*0}, 1},
+    {{1|(0<<4)},   {17.23*0, 21.33*1}, 4},
+    {{2|(0<<4)},   {17.23*0, 21.33*2}, 4},
+    {{3|(0<<4)},   {17.23*0, 21.33*3}, 4},
+    {{4|(0<<4)},   {17.23*0, 21.33*4}, 4},
+
+    {{0|(1<<4)},   {17.23*1, 21.33*0}, 4},
+    {{1|(1<<4)},   {17.23*1, 21.33*1}, 4},
+    {{2|(1<<4)},   {17.23*1, 21.33*2}, 4},
+    {{3|(1<<4)},   {17.23*1, 21.33*3}, 4},
+    {{4|(1<<4)},   {17.23*1, 21.33*4}, 4},
+
+    {{0|(2<<4)},   {17.23*2, 21.33*0}, 4},
+    {{1|(2<<4)},   {17.23*2, 21.33*1}, 4},
+    {{2|(2<<4)},   {17.23*2, 21.33*2}, 4},
+    {{3|(2<<4)},   {17.23*2, 21.33*3}, 4},
+    {{4|(2<<4)},   {17.23*2, 21.33*4}, 4},
+
+    {{0|(3<<4)},   {17.23*3, 21.33*0}, 4},
+    {{1|(3<<4)},   {17.23*3, 21.33*1}, 4},
+    {{2|(3<<4)},   {17.23*3, 21.33*2}, 4},
+    {{3|(3<<4)},   {17.23*3, 21.33*3}, 4},
+    {{4|(3<<4)},   {17.23*3, 21.33*4}, 4},
+
+    {{0|(4<<4)},   {17.23*4, 21.33*0}, 4},
+    {{1|(4<<4)},   {17.23*4, 21.33*1}, 4},
+    {{2|(4<<4)},   {17.23*4, 21.33*2}, 4},
+    {{3|(4<<4)},   {17.23*4, 21.33*3}, 4},
+    {{4|(4<<4)},   {17.23*4, 21.33*4}, 4},
+
+    {{0|(5<<4)},   {17.23*5, 21.33*0}, 4},
+    {{1|(5<<4)},   {17.23*5, 21.33*1}, 4},
+    {{2|(5<<4)},   {17.23*5, 21.33*2}, 4},
+    {{3|(5<<4)},   {17.23*5, 21.33*3}, 4},
+
+    {{0|(6<<4)},   {17.23*6, 21.33*0}, 4},
+    {{1|(6<<4)},   {17.23*6, 21.33*1}, 4},
+    {{2|(6<<4)},   {17.23*6, 21.33*2}, 4},
+
+    // cluster
+    {{5|(0<<4)},   {17.23*5.5, 21.33*4}, 4},
+    {{5|(1<<4)},   {17.23*6.0, 21.33*5}, 4},
+    {{5|(2<<4)},   {17.23*6.5, 21.33*6}, 4},
+
+
+
+
+    {{0|(0<<4)},   {17.23*13, 21.33*0}, 1},
+    {{1|(0<<4)},   {17.23*13, 21.33*1}, 4},
+    {{2|(0<<4)},   {17.23*13, 21.33*2}, 4},
+    {{3|(0<<4)},   {17.23*13, 21.33*3}, 4},
+    {{4|(0<<4)},   {17.23*13, 21.33*4}, 4},
+
+    {{0|(1<<4)},   {17.23*12, 21.33*0}, 4},
+    {{1|(1<<4)},   {17.23*12, 21.33*1}, 4},
+    {{2|(1<<4)},   {17.23*12, 21.33*2}, 4},
+    {{3|(1<<4)},   {17.23*12, 21.33*3}, 4},
+    {{4|(1<<4)},   {17.23*12, 21.33*4}, 4},
+
+    {{0|(2<<4)},   {17.23*11, 21.33*0}, 4},
+    {{1|(2<<4)},   {17.23*11, 21.33*1}, 4},
+    {{2|(2<<4)},   {17.23*11, 21.33*2}, 4},
+    {{3|(2<<4)},   {17.23*11, 21.33*3}, 4},
+    {{4|(2<<4)},   {17.23*11, 21.33*4}, 4},
+
+    {{0|(3<<4)},   {17.23*10, 21.33*0}, 4},
+    {{1|(3<<4)},   {17.23*10, 21.33*1}, 4},
+    {{2|(3<<4)},   {17.23*10, 21.33*2}, 4},
+    {{3|(3<<4)},   {17.23*10, 21.33*3}, 4},
+    {{4|(3<<4)},   {17.23*10, 21.33*4}, 4},
+
+    {{0|(4<<4)},   {17.23*9, 21.33*0}, 4},
+    {{1|(4<<4)},   {17.23*9, 21.33*1}, 4},
+    {{2|(4<<4)},   {17.23*9, 21.33*2}, 4},
+    {{3|(4<<4)},   {17.23*9, 21.33*3}, 4},
+    {{4|(4<<4)},   {17.23*9, 21.33*4}, 4},
+
+    {{0|(5<<4)},   {17.23*8, 21.33*0}, 4},
+    {{1|(5<<4)},   {17.23*8, 21.33*1}, 4},
+    {{2|(5<<4)},   {17.23*8, 21.33*2}, 4},
+    {{3|(5<<4)},   {17.23*8, 21.33*3}, 4},
+
+    {{0|(6<<4)},   {17.23*7, 21.33*0}, 4},
+    {{1|(6<<4)},   {17.23*7, 21.33*1}, 4},
+    {{2|(6<<4)},   {17.23*7, 21.33*2}, 4},
+
+    // cluster
+    {{5|(0<<4)},   {17.23*7.5, 21.33*4}, 4},
+    {{5|(1<<4)},   {17.23*7.0, 21.33*5}, 4},
+    {{5|(2<<4)},   {17.23*6.5, 21.33*6}, 4},
+
+};
--- a/keyboards/moonlander/moonlander.h
+++ b/keyboards/moonlander/moonlander.h
@@ -0,0 +1,61 @@
+/*
+Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define MCP23018_DEFAULT_ADDRESS 0b0100000
+
+#define ML_LED_1(status) (status ? writePinHigh(B5) : writePinLow(B5))
+#define ML_LED_2(status) (status ? writePinHigh(B4) : writePinLow(B4))
+#define ML_LED_3(status) (status ? writePinHigh(B3) : writePinLow(B3))
+
+#define ML_LED_4(status) mcp23018_leds[0] = status
+#define ML_LED_5(status) mcp23018_leds[1] = status
+#define ML_LED_6(status) mcp23018_leds[2] = status
+
+#include "quantum.h"
+
+#define LAYOUT_moonlander( \
+    k00, k01, k02, k03, k04, k05, k06, \
+    k10, k11, k12, k13, k14, k15, k16, \
+    k20, k21, k22, k23, k24, k25, k26, \
+    k30, k31, k32, k33, k34, k35, \
+    k40, k41, k42, k43, k44, \
+    k50, k51, k52, \
+\
+    k60, k61, k62, k63, k64, k65, k66, \
+    k70, k71, k72, k73, k74, k75, k76, \
+    k80, k81, k82, k83, k84, k85, k86, \
+         k91, k92, k93, k94, k95, k96, \
+              ka2, ka3, ka4, ka5, ka6, \
+                        kb4, kb5, kb6 \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06 }, \
+    { k10, k11, k12, k13, k14, k15, k16 }, \
+    { k20, k21, k22, k23, k24, k25, k26 }, \
+    { k30, k31, k32, k33, k34, k35, KC_NO }, \
+    { k40, k41, k42, k43, k44, KC_NO, KC_NO }, \
+    { k50, k51, k52, KC_NO, KC_NO, KC_NO, KC_NO }, \
+\
+    { k60, k61, k62, k63, k64, k65, k66 }, \
+    { k70, k71, k72, k73, k74, k75, k76 }, \
+    { k80, k81, k82, k83, k84, k85, k86 }, \
+    { KC_NO,k91, k92, k93, k94, k95, k96 }, \
+    { KC_NO, KC_NO, ka2, ka3, ka4, ka5, ka6 }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, kb4, kb5, kb6  } \
+}
--- a/keyboards/moonlander/rules.mk
+++ b/keyboards/moonlander/rules.mk
@@ -0,0 +1,23 @@
+# project specific files
+SRC =	matrix.c
+#LAYOUTS += ortho_4x12
+
+# Cortex version
+MCU  = STM32F303
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = yes # Custom matrix file
+AUDIO_ENABLE = yes
+RGB_MATRIX_ENABLE = IS31FL3731
+# SERIAL_LINK_ENABLE = yes
--- a/keyboards/planck/rules.mk
+++ b/keyboards/planck/rules.mk
@@ -0,0 +1,48 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+ifeq ($(strip $(KEYBOARD)), planck/rev3)
+    BOOTLOADER = atmel-dfu
+endif
+ifeq ($(strip $(KEYBOARD)), planck/rev4)
+    BOOTLOADER = atmel-dfu
+endif
+ifeq ($(strip $(KEYBOARD)), planck/rev5)
+    BOOTLOADER = qmk-dfu
+endif
+ifeq ($(strip $(KEYBOARD)), planck/light)
+    BOOTLOADER = atmel-dfu
+endif
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+LAYOUTS = ortho_4x12 planck_mit planck_grid
+LAYOUTS_HAS_RGB = no
+
+DEFAULT_FOLDER = planck/rev5
--- a/keyboards/satan/keymaps/olligranlund_iso/keymap.c
+++ b/keyboards/satan/keymaps/olligranlund_iso/keymap.c
@@ -48,9 +48,6 @@
 #define CALC KC_CALC  // Open default calculator app
 #define MYCM KC_MYCM  // Open default file manager

-// increase readability
-#define XXXXX    KC_NO
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

 /* Keymap BASE: (Base Layer) Default Layer
--- a/keyboards/satan/keymaps/olligranlund_iso/rules.mk
+++ b/keyboards/satan/keymaps/olligranlund_iso/rules.mk
@@ -13,5 +13,5 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
--- a/keyboards/sentraq/s60_x/config.h
+++ b/keyboards/sentraq/s60_x/config.h
@@ -0,0 +1,54 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2016 Julien Pecqueur <julien@peclu.net>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Massdrop
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B7
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+#ifdef SUBPROJECT_default
+    #include "default/config.h"
+#endif
+#ifdef SUBPROJECT_rgb
+    #include "rgb/config.h"
+#endif
+
+#endif
--- a/keyboards/sentraq/s60_x/default/config.h
+++ b/keyboards/sentraq/s60_x/default/config.h
@@ -1,43 +1,15 @@
-#pragma once
+#ifndef DEFAULT_CONFIG_H
+#define DEFAULT_CONFIG_H

 #include "config_common.h"

-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Sentraq
 #define PRODUCT         S60-X
-#define DESCRIPTION     QMK keyboard firmware for S60-X
+#define DESCRIPTION     q.m.k. keyboard firmware for S60-X

-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/* key matrix pins */
 #define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
 #define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 }
 #define UNUSED_PINS { F0 }

-/* number of backlight levels */
-#define BACKLIGHT_PIN B7
-#ifdef BACKLIGHT_PIN
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 3
-#endif
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
 #define LOCKING_SUPPORT_ENABLE
 #define LOCKING_RESYNC_ENABLE

@@ -45,3 +17,4 @@
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION

+#endif
--- a/keyboards/sentraq/s60_x/default/default.h
+++ b/keyboards/sentraq/s60_x/default/default.h
@@ -17,10 +17,16 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

-#pragma once
+#ifndef DEFAULT_H
+#define DEFAULT_H

 #include "quantum.h"

+#ifdef __INTELLISENSE__
+#define PROGMEM
+#include "../config.h"
+#endif
+
 /* S60-X keymap definition macro
 * K31 is the extra key next to short left ISO shift
 * K2C is the moved key next to enter on ISO boards
@@ -61,19 +67,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D, XXX, }  \
 }

-#define LAYOUT_60_hhkb( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D,      \
-    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, \
-         K41, K42,                K46,                     K4B, K4C            \
-) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, XXX, }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D, XXX, }, \
-    { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E, }, \
-    { XXX, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, XXX, K4B, K4C, XXX, XXX, }  \
-}

 #define LAYOUT_60_ansi_split_bs_rshift( \
    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
@@ -121,3 +114,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \
  { KC_##K40, KC_##K41, KC_##K42, XXX,      XXX,      XXX,      KC_##K46, XXX,      XXX,      XXX,      KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, XXX      }  \
 }
+
+#endif
--- a/keyboards/sentraq/s60_x/default/info.json
+++ b/keyboards/sentraq/s60_x/default/info.json
@@ -11,9 +11,6 @@
    "LAYOUT_60_ansi": {
      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
    },
-    "LAYOUT_60_hhkb": {
-      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}]
-    },
    "LAYOUT_60_ansi_split_bs_rshift": {
      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
    },
--- a/keyboards/sentraq/s60_x/default/rules.mk
+++ b/keyboards/sentraq/s60_x/default/rules.mk
@@ -1,68 +1,5 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-BOOTLOADER = atmel-dfu
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-
-
-LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no     # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no
--- a/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/config.h
+++ b/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/config.h
@@ -1,5 +1,9 @@
-#pragma once
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"

 // keymap needs oneshot functionality
 #undef NO_ACTION_ONESHOT

+#endif
--- a/keyboards/sentraq/s60_x/readme.md
+++ b/keyboards/sentraq/s60_x/readme.md
@@ -1,16 +1,16 @@
-# S60-x
-
+S60-x
+=====
 DIY compact keyboard designed by VinnyCordeiro for Sentraq. Most of the keymaps are based on GH60 code. This is a port from TMK to QMK based on the [original S60-X Repo](https://github.com/VinnyCordeiro/tmk_keyboard).

 Keyboard Maintainer: QMK Community  
 Hardware Supported: S60-x PCB  
 Hardware Availability: https://www.massdrop.com/buy/sentraq-60-diy-keyboard-kit?mode=guest_open

-There are two versions of this keyboard, an RGB and a non RGB one. Firmware built for one, will not work on the other. 
+There are two versions of this keyboard, an RGB and a non RGB one.

 Make example for this keyboard (after setting up your build environment):

-    make sentraq/s60_x/default:default
+    make sentraq/s60_x:default

 Make example for rgb version of this keyboard:

--- a/keyboards/sentraq/s60_x/rgb/config.h
+++ b/keyboards/sentraq/s60_x/rgb/config.h
@@ -1,43 +1,22 @@
-#pragma once
+#ifndef RBG_CONFIG_H
+#define RBG_CONFIG_H

 #include "config_common.h"

-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Sentraq
 #define PRODUCT         S60-X-RGB
-#define DESCRIPTION     QMK keyboard firmware for S60-X RGB
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
+#define DESCRIPTION     q.m.k. keyboard firmware for S60-X RGB

 /* key matrix pins */
 #define MATRIX_ROW_PINS { B5, B4, D7, D6, D4 }
 #define MATRIX_COL_PINS { D0, D1, D2, D3, D5, B6, C6, C7, F1, F0, E6, B3, B2, B1, B0 }
 #define UNUSED_PINS

-/* number of backlight levels */
-#define BACKLIGHT_PIN B7
-#ifdef BACKLIGHT_PIN
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 3
-#endif
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE

-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
 #define RGB_DI_PIN F6
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -47,3 +26,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif

+#endif
--- a/keyboards/sentraq/s60_x/rgb/info.json
+++ b/keyboards/sentraq/s60_x/rgb/info.json
@@ -0,0 +1,21 @@
+{
+  "keyboard_name": "S60-X",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+    "LAYOUT_60_ansi": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+    "LAYOUT_60_ansi_split_bs_rshift": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+    "LAYOUT_60_iso": {
+      "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    }
+  }
+}
--- a/keyboards/sentraq/s60_x/rgb/rgb.h
+++ b/keyboards/sentraq/s60_x/rgb/rgb.h
@@ -1,4 +1,5 @@
-#pragma once
+#ifndef S60XRGB_H
+#define S60XRGB_H

 #include "quantum.h"

@@ -34,19 +35,6 @@
    { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D, XXX, }  \
 }

-#define LAYOUT_60_hhkb( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D,      \
-    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, \
-         K41, K42,                K46,                 K4B, K4C                \
-) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, XXX, }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D, XXX, }, \
-    { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E, }, \
-    { XXX, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, XXX, K4B, K4C, XXX, XXX, }  \
-}

 #define LAYOUT_60_ansi_split_bs_rshift( \
    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
@@ -94,3 +82,5 @@
  { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \
  { KC_##K40, KC_##K41, KC_##K42, XXX,      XXX,      XXX,      KC_##K46, XXX,      XXX,      XXX,      KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, XXX      }  \
 }
+
+#endif
--- a/keyboards/sentraq/s60_x/rgb/rules.mk
+++ b/keyboards/sentraq/s60_x/rgb/rules.mk
@@ -1,73 +1,5 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-BOOTLOADER = atmel-dfu
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
 CONSOLE_ENABLE = no        # Console for debug(+400)
 COMMAND_ENABLE = no        # Commands for debug and configuration
 NKRO_ENABLE = yes          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes     # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes      # Enable RGB light
-
-
-LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb
+RGBLIGHT_ENABLE = yes      # Enable RGB light
--- a/keyboards/sentraq/s60_x/rules.mk
+++ b/keyboards/sentraq/s60_x/rules.mk
@@ -0,0 +1,69 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+
+DEFAULT_FOLDER = sentraq/s60_x/default
+
+LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso
--- a/keyboards/sentraq/s60_x/s60_x.c
+++ b/keyboards/sentraq/s60_x/s60_x.c
@@ -0,0 +1 @@
+#include "s60_x.h"
--- a/keyboards/sentraq/s60_x/s60_x.h
+++ b/keyboards/sentraq/s60_x/s60_x.h
@@ -0,0 +1,13 @@
+#ifndef S60X_H
+#define S60X_H
+
+#ifdef KEYBOARD_sentraq_s60_x_default
+    #include "default.h"
+#endif
+#ifdef KEYBOARD_sentraq_s60_x_rgb
+    #include "rgb.h"
+#endif
+
+#include "quantum.h"
+
+#endif
--- a/keyboards/westfoxtrot/aanzee/aanzee.h
+++ b/keyboards/westfoxtrot/aanzee/aanzee.h
@@ -33,30 +33,30 @@
 #define LAYOUT_ansi( \
  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0F, K0D, K0E, \
  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1D, K1E, \
-  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,           K2D, K2E, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A,      K2C,      K2D, K2E, \
  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,      K3D, K3E, \
-  K40, K41, K42,                K46,           K49, K4A,      K4C,      K4D, K4E  \
+  K40, K41, K42,                K46,           K49, K4A, K4B, K4C,      K4D, K4E  \
 ) \
 { \
  {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F}, \
  {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, ___}, \
-  {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, ___, K2D, K2E, ___}, \
+  {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, ___, K2C, K2D, K2E, ___}, \
  {K30, ___, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, ___}, \
-  {K40, K41, K42, ___, ___, ___, K46, ___, ___, K49, K4A, ___, K4C, K4D, K4E, ___}  \
+  {K40, K41, K42, ___, ___, ___, K46, ___, ___, K49, K4A, K4B, K4C, K4D, K4E, ___}  \
 }
 #define LAYOUT_iso( \
  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
-  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1E, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B,      K1D, K1E, \
  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \
  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
-  K40, K41, K42,                K46,           K49, K4A,      K4C, K4D, K4E  \
+  K40, K41, K42,                K46,           K49, K4A, K4B, K4C, K4D, K4E  \
 ) \
 { \
  {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, ___}, \
-  {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, ___, K1E, ___}, \
+  {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, ___, K1D, K1E, ___}, \
  {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, ___}, \
  {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, ___}, \
-  {K40, K41, K42, ___, ___, ___, K46, ___, ___, K49, K4A, ___, K4C, K4D, K4E, ___}  \
+  {K40, K41, K42, ___, ___, ___, K46, ___, ___, K49, K4A, K4B, K4C, K4D, K4E, ___}  \
 }

 void matrix_init_user(void);
--- a/keyboards/westfoxtrot/aanzee/keymaps/default/keymap.c
+++ b/keyboards/westfoxtrot/aanzee/keymaps/default/keymap.c
@@ -25,14 +25,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,KC_BSLS,         KC_END, \
    KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,         KC_ENT,         KC_PGUP,  \
    KC_LSFT,          KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,KC_RSFT,  KC_UP,         KC_PGDN, \
-    KC_LCTRL,KC_LGUI,KC_LALT,                 KC_SPC,                        KC_RALT,MO(_F1),                KC_LEFT,KC_DOWN,KC_RGHT),
+    KC_LCTRL,KC_LGUI,KC_LALT,                 KC_SPC,                        KC_RALT,MO(_F1),KC_RCTL,KC_LEFT,KC_DOWN,       KC_RGHT),

  [_F1] = LAYOUT_ansi(
    RESET,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,  KC_F12,_______,_______,_______, \
    _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______,_______,_______,        _______, \
    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        _______,  \
    _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______, \
-    _______,_______,_______,                _______,                        _______,_______,_______,_______,                _______)
+    _______,_______,_______,                _______,                        _______,_______,_______,_______,_______,        _______)
  };

    void matrix_init_user(void) {
--- a/keyboards/westfoxtrot/aanzee/keymaps/iso-default/keymap.c
+++ b/keyboards/westfoxtrot/aanzee/keymaps/iso-default/keymap.c
@@ -25,14 +25,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,         KC_END, \
    KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,KC_NUHS, KC_ENT, KC_PGUP,  \
    KC_LSFT,  KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,KC_RSFT,  KC_UP, KC_PGDN, \
-    KC_LCTRL,KC_LGUI,KC_LALT,               KC_SPC,                        KC_RALT,MO(_F1),     KC_LEFT,KC_DOWN, KC_RGHT),
+    KC_LCTRL,KC_LGUI,KC_LALT,               KC_SPC,                        KC_RALT,MO(_F1),KC_RCTL,KC_LEFT,KC_DOWN, KC_RGHT),

  [_F1] = LAYOUT_iso(
    RESET,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,  KC_F12,_______,_______, \
    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______, \
    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  \
    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
-    _______,_______,_______,                _______,                        _______,_______,_______,_______,_______)
+    _______,_______,_______,                _______,                        _______,_______,_______,_______,_______,_______)
  };

    void matrix_init_user(void) {
--- a/keyboards/westfoxtrot/aanzee/keymaps/via/keymap.c
+++ b/keyboards/westfoxtrot/aanzee/keymaps/via/keymap.c
@@ -25,14 +25,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,KC_BSLS,         KC_END, \
    KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,         KC_ENT,         KC_PGUP,  \
    KC_LSFT,          KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,KC_RSFT,  KC_UP,         KC_PGDN, \
-    KC_LCTRL,KC_LGUI,KC_LALT,                 KC_SPC,                        KC_RALT,MO(_F1)      ,KC_LEFT,KC_DOWN,       KC_RGHT),
+    KC_LCTRL,KC_LGUI,KC_LALT,                 KC_SPC,                        KC_RALT,MO(_F1),KC_RCTL,KC_LEFT,KC_DOWN,       KC_RGHT),

  [_F1] = LAYOUT_ansi(
    RESET,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,  KC_F12,_______,_______,_______, \
    _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______,_______,_______,        _______, \
    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        _______,  \
    _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______, \
-    _______,_______,_______,                _______,                        _______,_______        ,_______,_______,        _______)
+    _______,_______,_______,                _______,                        _______,_______,_______,_______,_______,        _______)
  };

    void matrix_init_user(void) {
--- a/layouts/community/ortho_4x12/jotix/config.h
+++ b/layouts/community/ortho_4x12/jotix/config.h
@@ -1 +0,0 @@
-#define UNICODE_SELECTED_MODES UC_LNX
--- a/layouts/community/ortho_4x12/jotix/keymap.c
+++ b/layouts/community/ortho_4x12/jotix/keymap.c
@@ -1,3 +1,6 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
 #include QMK_KEYBOARD_H

 extern keymap_config_t keymap_config;
@@ -7,175 +10,81 @@ extern keymap_config_t keymap_config;
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
 // entirely and just use numbers.

-#define _QWERTY  0
-#define _FN      1
-#define _UNICODE 2
-#define _ADJUST  3
+#define _QWERTY   0
+#define _LOWER    1
+#define _RAISE    2
+#define _ADJUST   3

-#define FN MO(_FN)
-#define UNICODE MO(_UNICODE)
-
-enum unicode_names {
-    AACUTE,
-    AACUTE_M,
-    EACUTE,
-    EACUTE_M,
-    IACUTE,
-    IACUTE_M,
-    OACUTE,
-    OACUTE_M,
-    UACUTE,
-    UACUTE_M,
-    UDIER,
-    UDIER_M,
-    NTILDE,
-    NTILDE_M,
-    POUN,
-    COPY,
-    ORDF,
-    ORDM,
-    QUAD,
-    CUBE,
-    DEGR,
-    QUAR,
-    HALF,
-    NOT,
-    LDQU,
-    RDQU,
-    QUES,
-    EXCL,
-    ARRL,
-    ARRU,
-    ARRR,
-    ARRD,
-    EURO,
-    SMIL,
-    NEUT,
-    SMIH,
-    ANGR,
-    WORR,
-    DIZY,
-    TONG,
-    DISS,
-    SCRE,
-};
-
-const uint32_t PROGMEM unicode_map[] = {
-    [AACUTE]    = 0xe1, // á
-    [AACUTE_M]  = 0xc1, // Á
-    [EACUTE]    = 0xe9, // é
-    [EACUTE_M]  = 0xc9, // É
-    [IACUTE]    = 0xed, // í
-    [IACUTE_M]  = 0xcd, // Í
-    [OACUTE]    = 0xf3, // ó
-    [OACUTE_M]  = 0xd3, // Ó
-    [UACUTE]    = 0xfa, // ú
-    [UACUTE_M]  = 0xda, // Ú
-    [UDIER]     = 0xfc, // ü
-    [UDIER_M]   = 0xdc, // Ü
-    [NTILDE]    = 0xf1, // ñ
-    [NTILDE_M]  = 0xd1, // Ñ
-    [POUN]      = 0xa3, // £
-    [COPY]      = 0xa9, // ©
-    [ORDF]      = 0xaa, // ª
-    [ORDM]      = 0xba, // º
-    [QUAD]      = 0xb2, // ²
-    [CUBE]      = 0xb3, // ³
-    [DEGR]      = 0xb0, // °
-    [QUAR]      = 0xbc, // ¼
-    [HALF]      = 0xbd, // ½
-    [NOT]       = 0xac, // ¬
-    [LDQU]      = 0xab, // «
-    [RDQU]      = 0xbb, // »
-    [QUES]      = 0xbf, // ¿
-    [EXCL]      = 0xa1, // ¡
-    [ARRL]      = 0x2190, // ←
-    [ARRU]      = 0x2191, // ↑
-    [ARRR]      = 0x2192, // →
-    [ARRD]      = 0x2193, // ↓
-    [EURO]      = 0x20ac, // €
-    [SMIL]      = 0x1f603, // 😃
-    [NEUT]      = 0x1f610, // 😐 
-    [SMIH]      = 0x1f608, // 😈
-    [ANGR]      = 0x1f620, // 😠
-    [WORR]      = 0x1f61f, // 😟
-    [DIZY]      = 0x1f635, // 😵
-    [TONG]      = 0x1f61d, // 😝
-    [DISS]      = 0x1f61e, // 😝
-    [SCRE]      = 0x1f631, // 😱
-};
-
-#define A_UNIC XP(AACUTE, AACUTE_M)
-#define E_UNIC XP(EACUTE, EACUTE_M)
-#define I_UNIC XP(IACUTE, IACUTE_M)
-#define O_UNIC XP(OACUTE, OACUTE_M)
-#define U_UNIC XP(UACUTE, UACUTE_M)
-#define Y_UNIC XP(UDIER,  UDIER_M )
-#define N_UNIC XP(NTILDE, NTILDE_M)
-
-#define TAB_UNI LT(_UNICODE, KC_TAB) 
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

-/* qwerty
+/* Qwerty
 * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
 * |   esc  |    Q   |    W   |    E   |    R   |    T   |    Y   |    U   |    I   |    O   |    P   |  bksp  |
 * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
- * |tab/unic|    A   |    S   |    D   |    F   |    G   |    H   |    J   |    K   |    L   |    ;   |    '   |
+ * |   tab  |    A   |    S   |    D   |    F   |    G   |    H   |    J   |    K   |    L   |    ;   |    '   |
 * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
 * | lshift |    Z   |    X   |    C   |    V   |    B   |    N   |    M   |    ,   |    .   |    /   |  enter |
 * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
- * |  lctrl |  lalt  |  caps  |   del  |  lgui  |  space |  space |   fn   |  left  |  down  |   up   |  right | 
+ * |  lctrl |  lalt  |  ralt  |  lgui  |  lower |  space |  space |  raise |  left  |  down  |   up   |  right | 
 * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
 */
 [_QWERTY] = LAYOUT_ortho_4x12 ( 
    KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-    TAB_UNI, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
-    KC_LCTL, KC_LALT, KC_CAPS, KC_DEL,  KC_LGUI, KC_SPC,  KC_SPC,  FN,      KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+    KC_LCTL, KC_LALT, KC_RALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
 ),

-/* fn
+/* Lower
 * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
- * |        |    1   |    2   |    3   |    4   |    5   |    6   |    7   |    8   |    9   |    0   |        |
+ * |    `   |    1   |    2   |    3   |    4   |    5   |    6   |    7   |    8   |    9   |    0   |        |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ * |        |    -   |    =   |    [   |    ]   |    \   |        |        |        |        |        |        |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ * |        |    _   |    +   |    {   |    }   |    |   |        |        |        |        |        |        |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ * |        |        |        |        |        |        |        |        |        |        |        |        |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ */
+[_LOWER] = LAYOUT_ortho_4x12 (
+     KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+     _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, _______, _______, _______, _______, _______, _______,
+     _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, _______, _______, _______, _______, _______, _______,
+     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+),
+
+/* Raise
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ * |    ~   |    !   |    @   |    #   |    $   |    %   |    ^   |    &   |    *   |    (   |    )   |   del  |
 * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
 * |        |   F1   |   F2   |   F3   |   F4   |   F5   |   F6   |    -   |    =   |    [   |    ]   |    \   |
 * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
- * |        |   F7   |   F8   |   F9   |   F10  |   F11  |   F12  |    `   |        |        |        |        |
+ * |        |   F7   |   F8   |   F9   |   F10  |   F11  |   F12  |    _   |    +   |    {   |    }   |    |   |
 * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
 * |        |        |        |        |        |        |        |        |  home  |  pgdn  |  pgun  |   end  |
 * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
 */
-[_FN] = LAYOUT_ortho_4x12 (
-    _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+[_RAISE] = LAYOUT_ortho_4x12 (
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_GRV,  _______, _______, _______, _______,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
    _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
 ),

-/* 
- * unicode
- */
-[_UNICODE] = LAYOUT_ortho_4x12 ( 
-    _______, X(EXCL), X(WORR), E_UNIC,  X(EURO), X(TONG), Y_UNIC,  U_UNIC,  I_UNIC,  O_UNIC,  X(POUN), _______,
-    _______, A_UNIC,  X(SMIL), X(DISS), X(SCRE), X(DEGR), X(SMIH), X(NOT),  X(QUAR), X(HALF), X(ORDF), X(ORDM),
-    _______, X(DIZY), X(ANGR), X(COPY), X(QUAD), X(CUBE), N_UNIC,  X(NEUT), X(LDQU), X(RDQU), X(QUES), _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, X(ARRL), X(ARRD), X(ARRU), X(ARRR)
-),
-
-/* 
- * Adjust 
- */
+/* Adjust */
 [_ADJUST] = LAYOUT_ortho_4x12 (
    _______, RESET,   _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______,
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, BL_STEP, BL_BRTG, _______, _______, _______, _______, _______,
+    _______, _______, _______, KC_CAPS, _______, BL_STEP, BL_BRTG, _______, _______, _______, _______, _______,
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
 ),    
 };

 uint32_t layer_state_set_user(uint32_t state) {
-  return update_tri_layer_state(state, _FN, _UNICODE, _ADJUST);
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
 }

 void matrix_init_user(void) {
--- a/layouts/community/ortho_4x12/jotix/rules.mk
+++ b/layouts/community/ortho_4x12/jotix/rules.mk
@@ -1 +0,0 @@
-UNICODEMAP_ENABLE = yes
--- a/layouts/community/ortho_4x12/jotix2/keymap.c
+++ b/layouts/community/ortho_4x12/jotix2/keymap.c
@@ -0,0 +1,87 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _QWERTY 0
+#define _LOWER  1
+#define _RAISE  2
+#define _GAME   3
+#define _ADJUST 4
+
+#define LOWER  MO(_LOWER)
+#define RAISE  MO(_RAISE)
+#define GAME   TG(_GAME)
+
+/* Funct
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ * |    `   |    1   |    2   |    3   |    4   |    5   |    6   |    7   |    8   |    9   |    0   |        |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ * |        |   F1   |   F2   |   F3   |   F4   |   F5   |   F6   |    -   |    =   |    [   |    ]   |    \   |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ * |        |   F7   |   F8   |   F9   |   F10  |   F11  |   F12  |    '   |        |        |        |        |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ * |        |        |        |        |        |        |        |        |  home  |  vol-  |  vol+  |   end  |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ */
+#define _FUNCT LAYOUT_ortho_4x12 (\
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,\
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,\
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_QUOT, _______, _______, _______, _______,\
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_VOLD, KC_VOLU, KC_END\
+)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   esc  |    Q   |    W   |    E   |    R   |    T   |    Y   |    U   |    I   |    O   |    P   |  bksp  |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ * |   tab  |    A   |    S   |    D   |    F   |    G   |    H   |    J   |    K   |    L   |    ;   |   del  |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ * | lshift |    Z   |    X   |    C   |    V   |    B   |    N   |    M   |    ,   |    .   |    /   |  enter |
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ * |  lctrl |  lgui  |  lalt  |  ralt  | funct  |  space |  space |  funct |  left  |  down  |   up   |  right | 
+ * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+
+ */
+[_QWERTY] = LAYOUT_ortho_4x12 ( 
+    KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_DEL,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+    KC_LCTL, KC_LGUI, KC_LALT, KC_RALT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+[_LOWER] = _FUNCT,
+
+[_RAISE] = _FUNCT,
+
+/* Game */
+[_GAME] = LAYOUT_ortho_4x12 (
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT
+),    
+
+/* Adjust */
+[_ADJUST] = LAYOUT_ortho_4x12 (
+    _______, RESET,   _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______,
+    _______, _______, _______, _______, _______, GAME,    _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, BL_STEP, BL_BRTG, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+),    
+};
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+void matrix_init_user(void) {
+}
--- a/layouts/community/ortho_4x12/jotix2/readme.md
+++ b/layouts/community/ortho_4x12/jotix2/readme.md
@@ -0,0 +1,8 @@
+# Jotix2 ortho 4x12 keymap
+
+![keymap](https://i.imgur.com/WMfIpH3.jpg)
+
+Tested on:
+
+* Planck/rev4
+* Jotanck
--- a/quantum/process_keycode/process_space_cadet.c
+++ b/quantum/process_keycode/process_space_cadet.c
@@ -62,16 +62,16 @@
 #ifndef LCPO_KEYS
  #define LCPO_KEYS KC_LCTL, KC_LCTL, KC_9
 #endif
-#ifndef RCPC_KEYS
-  #define RCPC_KEYS KC_RCTL, KC_RCTL, KC_0
+#ifndef RCPO_KEYS
+  #define RCPO_KEYS KC_RCTL, KC_RCTL, KC_0
 #endif

 // Alt / paren setup
 #ifndef LAPO_KEYS
  #define LAPO_KEYS KC_LALT, KC_LALT, KC_9
 #endif
-#ifndef RAPC_KEYS
-  #define RAPC_KEYS KC_RALT, KC_RALT, KC_0
+#ifndef RAPO_KEYS
+  #define RAPO_KEYS KC_RALT, KC_RALT, KC_0
 #endif

 // Shift / Enter setup
@@ -82,32 +82,27 @@
 static uint8_t sc_last = 0;
 static uint16_t sc_timer = 0;

-void perform_space_cadet(keyrecord_t *record, uint8_t holdMod, uint8_t tapMod, uint8_t keycode) {
+void perform_space_cadet(keyrecord_t *record, uint8_t normalMod, uint8_t tapMod, uint8_t keycode) {
  if (record->event.pressed) {
-    sc_last = holdMod;
+    sc_last = normalMod;
    sc_timer = timer_read ();
-    if (IS_MOD(holdMod)) {
-      register_mods(MOD_BIT(holdMod));
+    if (IS_MOD(normalMod)) {
+      register_mods(MOD_BIT(normalMod));
    }
  }
  else {
-    if (sc_last == holdMod && timer_elapsed(sc_timer) < TAPPING_TERM) {
-      if (holdMod != tapMod) {
-        if (IS_MOD(holdMod)) {
-          unregister_mods(MOD_BIT(holdMod));
-        }
-        if (IS_MOD(tapMod)) {
-          register_mods(MOD_BIT(tapMod));
-        }
+    if (IS_MOD(normalMod)) {
+      unregister_mods(MOD_BIT(normalMod));
+    }
+
+    if (sc_last == normalMod && timer_elapsed(sc_timer) < TAPPING_TERM) {
+      if (IS_MOD(tapMod)) {
+        register_mods(MOD_BIT(tapMod));
      }
      tap_code(keycode);
      if (IS_MOD(tapMod)) {
        unregister_mods(MOD_BIT(tapMod));
      }
-    } else {
-      if (IS_MOD(holdMod)) {
-        unregister_mods(MOD_BIT(holdMod));
-      }
    }
  }
 }
@@ -127,7 +122,7 @@ bool process_space_cadet(uint16_t keycode, keyrecord_t *record) {
      return false;
    }
    case KC_RCPC: {
-      perform_space_cadet(record, RCPC_KEYS);
+      perform_space_cadet(record, RCPO_KEYS);
      return false;
    }
    case KC_LAPO: {
@@ -135,7 +130,7 @@ bool process_space_cadet(uint16_t keycode, keyrecord_t *record) {
      return false;
    }
    case KC_RAPC: {
-      perform_space_cadet(record, RAPC_KEYS);
+      perform_space_cadet(record, RAPO_KEYS);
      return false;
    }
    case KC_SFTENT: {
--- a/quantum/process_keycode/process_space_cadet.h
+++ b/quantum/process_keycode/process_space_cadet.h
@@ -17,5 +17,5 @@

 #include "quantum.h"

-void perform_space_cadet(keyrecord_t *record, uint8_t holdMod, uint8_t tapMod, uint8_t keycode);
+void perform_space_cadet(keyrecord_t *record, uint8_t normalMod, uint8_t tapMod, uint8_t keycode);
 bool process_space_cadet(uint16_t keycode, keyrecord_t *record);
--- a/quantum/template/ps2avrgb/readme.md
+++ b/quantum/template/ps2avrgb/readme.md
@@ -16,8 +16,6 @@ Flashing

 ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 

-**Reset Key:** Hold down the key located at `K00`, commonly programmed as `Esc` while plugging in the keyboard.
-
 Windows: 
 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
 2. Place your keyboard into reset. 
--- a/quantum/template/ps2avrgb/rules.mk
+++ b/quantum/template/ps2avrgb/rules.mk
@@ -31,13 +31,13 @@ F_CPU = 12000000
 BOOTLOADER = bootloadHID

 # build options
-BOOTMAGIC_ENABLE = no
+BOOTMAGIC_ENABLE = full
 MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = no
 RGBLIGHT_CUSTOM_DRIVER = yes

 OPT_DEFS = -DDEBUG_LEVEL=0
--- a/quantum/template/ps2avrgb/usbconfig.h
+++ b/quantum/template/ps2avrgb/usbconfig.h
@@ -8,7 +8,8 @@
 * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
 */

-#pragma once
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__

 #include "config.h"

@@ -391,3 +392,5 @@ section at the end of this file).
 /* #define USB_INTR_PENDING        EIFR */
 #define USB_INTR_PENDING_BIT    INTF1
 #define USB_INTR_VECTOR         INT1_vect
+
+#endif /* __usbconfig_h_included__ */
--- a/users/xulkal/config.h
+++ b/users/xulkal/config.h
@@ -10,7 +10,7 @@
 #define LSPO_KEYS KC_LSFT, KC_TRNS, KC_LBRC
 #define RSPC_KEYS KC_RSFT, KC_TRNS, KC_RBRC
 #define LCPO_KEYS KC_LCTL, KC_TRNS, KC_MINS
-#define RCPC_KEYS KC_RCTL, KC_TRNS, KC_EQL
+#define RCPO_KEYS KC_RCTL, KC_TRNS, KC_EQL

 // No need for the single versions when multi performance isn't a problem =D
 #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
--- a/util/docker_build.sh
+++ b/util/docker_build.sh
@@ -35,7 +35,7 @@ else
 fi
 if [ -n "$target" ]; then
 	if [ "$(uname)" = "Linux" ] || docker-machine active >/dev/null 2>&1; then
-		usb_args="--privileged -v /dev:/dev"
+		usb_args="--privileged -v /dev/bus/usb:/dev/bus/usb"
 	else
 		echo "Error: target requires docker-machine to work on your platform" >&2
 		echo "See http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos" >&2
Author	SHA1	Message	Date
Jack Humbert	0a7efccdc6	update rgb config	2019-05-07 00:13:50 -04:00
Jack Humbert	63f5473792	compile issues	2019-05-06 21:59:36 -04:00
Jack Humbert	4987042369	merge from master	2019-05-03 13:23:27 -04:00
Jack Humbert	0cc94ca264	flip leds	2019-05-03 13:13:09 -04:00
Jack Humbert	fed08eb772	updated pcb layout	2019-05-02 21:31:55 -04:00
Jack Humbert	9a2a79bac8	additional layer, tests	2019-01-03 13:19:05 -05:00
Jack Humbert	3e7b4a15af	leds configd	2018-12-19 23:02:05 -05:00
Jack Humbert	d16568eca9	keymap and mapping	2018-12-19 22:50:09 -05:00
Jack Humbert	beaf774a81	leds working on both sides	2018-12-19 20:11:54 -05:00
Jack Humbert	e0f94480d1	Merge branch 'proton_c_option' of github.com:qmk/qmk_firmware into titmlb	2018-12-19 18:33:29 -05:00
Jack Humbert	65fef7ef92	add custom matrix	2018-12-19 18:33:16 -05:00
Jack Humbert	53f13eda42	left side working with matrix	2018-12-19 18:32:54 -05:00
Jack Humbert	ba4a599f13	proton c update for mcu selection	2018-12-16 13:01:42 -05:00
Jack Humbert	973e3a7849	doc updates	2018-12-15 12:47:49 -05:00
Jack Humbert	738efb2529	update flag names	2018-12-15 12:01:44 -05:00
Jack Humbert	dcdc2e4924	disable backlight, fix d7	2018-12-15 01:12:54 -05:00
Jack Humbert	44370bc35b	add at90 to list	2018-12-14 23:43:50 -05:00
Jack Humbert	f8c07e05c2	add pin mapping and sweet16 test	2018-12-13 14:33:54 -05:00
Jack Humbert	255173f379	merge	2018-12-13 12:52:36 -05:00
Jack Humbert	faab245ed4	add configs	2018-12-13 12:31:30 -05:00
Jack Humbert	60433d71a1	add leds	2018-11-29 16:19:36 -05:00
Jack Humbert	45f1fccd3b	start left	2018-11-29 16:08:07 -05:00
Jack Humbert	d9ef323f8a	start of mcu selection	2018-10-24 16:10:13 -04:00
Jack Humbert	57b21c037c	initial proton coversion, no pin mapping	2018-10-23 23:57:54 -04:00
Jack Humbert	fd3c1aa909	adds readme.md	2018-10-23 20:38:50 -04:00
Jack Humbert	3d50a2867b	fixes custom matrix include	2018-10-23 20:35:17 -04:00
Jack Humbert	0836e47e33	adds proton c base	2018-10-23 20:35:04 -04:00