Fix detection of ModemManager (#7076)

* Add pok3r-like keymap for dz60.

* Replace KC_TRNS with underscores

common_features.mk

@@ -246,6 +246,11 @@ ifneq ($(strip $(BACKLIGHT_ENABLE)), no)
         CIE1931_CURVE = yes
     endif
 
+
+    COMMON_VPATH += $(QUANTUM_DIR)/backlight
+    SRC += $(QUANTUM_DIR)/backlight/backlight.c
+    OPT_DEFS += -DBACKLIGHT_ENABLE
+
     ifeq ($(strip $(BACKLIGHT_ENABLE)), custom)
         OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
     endif

docs/coding_conventions_c.md

@@ -31,17 +31,17 @@ Here is an example for easy reference:
 ```c
 /* Enums for foo */
 enum foo_state {
-  FOO_BAR,
-  FOO_BAZ,
+    FOO_BAR,
+    FOO_BAZ,
 };
 
 /* Returns a value */
 int foo(void) {
-  if (some_condition) {
-    return FOO_BAR;
-  } else {
-    return -1;
-  }
+    if (some_condition) {
+        return FOO_BAR;
+    } else {
+        return -1;
+    }
 }
 ```
 

docs/config_options.md

@@ -310,13 +310,13 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i
 Use these to enable or disable building certain features. The more you have enabled the bigger your firmware will be, and you run the risk of building a firmware too large for your MCU.
 
 * `BOOTMAGIC_ENABLE`
-  * Virtual DIP switch configuration(+1000)
+  * Virtual DIP switch configuration
 * `MOUSEKEY_ENABLE`
-  * Mouse keys(+4700)
+  * Mouse keys
 * `EXTRAKEY_ENABLE`
-  * Audio control and System control(+450)
+  * Audio control and System control
 * `CONSOLE_ENABLE`
-  * Console for debug(+400)
+  * Console for debug
 * `COMMAND_ENABLE`
   * Commands for debug and configuration
 * `COMBO_ENABLE`
@@ -348,7 +348,7 @@ Use these to enable or disable building certain features. The more you have enab
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.
 * `LINK_TIME_OPTIMIZATION_ENABLE`
-  = Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` 
+  = Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION`
 
 ## USB Endpoint Limitations
 

docs/feature_hd44780.md

@@ -2,7 +2,7 @@
 
 This is an integration of Peter Fleury's LCD library. This page will explain the basics. [For in depth documentation visit his page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
 
-You can enable support for HD44780 Displays by setting the `HD44780_ENABLE` flag in your keyboards `rules.mk` to yes. This will use about 400 KB of extra space.
+You can enable support for HD44780 Displays by setting the `HD44780_ENABLE` flag in your keyboards `rules.mk` to yes.
 
 ## Configuration
 
@@ -26,7 +26,7 @@ Uncomment the section labled HD44780 and change the parameters as needed.
 #define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
 #define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
 #define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2 
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
 #define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
 #define LCD_RS_PORT      LCD_PORT     //< port for RS line        
 #define LCD_RS_PIN       3            //< pin  for RS line        
@@ -39,14 +39,14 @@ Uncomment the section labled HD44780 and change the parameters as needed.
 
 Should you need to configure other properties you can copy them from `quantum/hd44780.h` and set them in your `config.h`
 
-## Usage 
+## Usage
 
 To initialize your display, call `lcd_init()` with one of these parameters:
 ````
 LCD_DISP_OFF             : display off
 LCD_DISP_ON              : display on, cursor off
 LCD_DISP_ON_CURSOR       : display on, cursor on
-LCD_DISP_ON_CURSOR_BLINK : display on, cursor on flashing 
+LCD_DISP_ON_CURSOR_BLINK : display on, cursor on flashing
 ````
 This is best done in your keyboards `matrix_init_kb` or your keymaps `matrix_init_user`.  
 It is advised to clear the display before use.  

docs/feature_key_lock.md

@@ -16,7 +16,7 @@ First, enable Key Lock by setting `KEY_LOCK_ENABLE = yes` in your `rules.mk`. Th
 
 ## Caveats
 
-Key Lock is only able to hold standard action keys and [One Shot modifier](quantum_keycodes.md#one-shot-keys) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
+Key Lock is only able to hold standard action keys and [One Shot modifier](feature_advanced_keycodes.md#one-shot-keys) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
 This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as `KC_LPRN`. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held.
 
 Switching layers will not cancel the Key Lock.

docs/feature_terminal.md

@@ -1,6 +1,6 @@
 # Terminal
 
-> This feature is currently *huge* at 4400 bytes, and should probably only be put on boards with a lot of memory, or for fun.
+> This feature is currently *huge*, and should probably only be put on boards with a lot of memory, or for fun.
 
 The terminal feature is a command-line-like interface designed to communicate through a text editor with keystrokes. It's beneficial to turn off auto-indent features in your editor.
 
@@ -56,7 +56,7 @@ Outputs the last 5 commands entered
 1. help
 2. about
 3. keymap 0
-4. help 
+4. help
 5. flush-buffer
 ```
 

docs/fr-FR/newbs_testing_debugging.md

@@ -8,7 +8,8 @@ Tester votre clavier est normalement assez simple. Appuyez chaque touche de votr
 
 Note: ces programmes ne sont ni fournis ni approuvés par QMK.
 
-* [Switch Hitter](https://elitekeyboards.com/switchhitter.php) (Windows seulement)
+* [QMK Configurator](https://config.qmk.fm/#/test/) (Web)
+* [Switch Hitter](https://web.archive.org/web/20190413233743/https://elitekeyboards.com/switchhitter.php) (Windows seulement)
 * [Keyboard Viewer](https://www.imore.com/how-use-keyboard-viewer-your-mac) (Mac seulement)
 * [Keyboard Tester](http://www.keyboardtester.com) (Web)
 * [Keyboard Checker](http://keyboardchecker.com) (Web)

docs/getting_started_make_guide.md

@@ -41,8 +41,6 @@ Set these variables to `no` to disable them, and `yes` to enable them.
 
 This allows you to hold a key and the salt key (space by default) and have access to a various EEPROM settings that persist over power loss. It's advised you keep this disabled, as the settings are often changed by accident, and produce confusing results that makes it difficult to debug. It's one of the more common problems encountered in help sessions.
 
-Consumes about 1000 bytes.
-
 `MOUSEKEY_ENABLE`
 
 This gives you control over cursor movements and clicks via keycodes/custom functions.
@@ -67,8 +65,6 @@ To see the text, open `hid_listen` and enjoy looking at your printed messages.
 
 **NOTE:** Do not include *uprint* messages in anything other than your keymap code. It must not be used within the QMK system framework. Otherwise, you will bloat other people's .hex files.
 
-Consumes about 400 bytes.
-
 `COMMAND_ENABLE`
 
 This enables magic commands, typically fired with the default magic key combo `LSHIFT+RSHIFT+KEY`. Magic commands include turning on debugging messages (`MAGIC+D`) or temporarily toggling NKRO (`MAGIC+N`).
@@ -125,11 +121,9 @@ Use this to debug changes to variable values, see the [tracing variables](unit_t
 
 This enables using the Quantum SYSEX API to send strings (somewhere?)
 
-This consumes about 5390 bytes.
-
 `KEY_LOCK_ENABLE`
 
-This enables [key lock](feature_key_lock.md). This consumes an additional 260 bytes.
+This enables [key lock](feature_key_lock.md).
 
 `SPLIT_KEYBOARD`
 

docs/newbs_testing_debugging.md

@@ -8,7 +8,8 @@ Testing your keyboard is usually pretty straightforward. Press every single key
 
 Note: These programs are not provided by or endorsed by QMK.
 
-* [Switch Hitter](https://elitekeyboards.com/switchhitter.php) (Windows Only)
+* [QMK Configurator](https://config.qmk.fm/#/test/) (Web Based)
+* [Switch Hitter](https://web.archive.org/web/20190413233743/https://elitekeyboards.com/switchhitter.php) (Windows Only)
 * [Keyboard Viewer](https://www.imore.com/how-use-keyboard-viewer-your-mac) (Mac Only)
 * [Keyboard Tester](http://www.keyboardtester.com) (Web Based)
 * [Keyboard Checker](http://keyboardchecker.com) (Web Based)

docs/zh-cn/newbs_testing_debugging.md

@@ -8,7 +8,8 @@
 
 注意：这些程序不是由QMK提供或认可的。
 
-* [Switch Hitter](https://elitekeyboards.com/switchhitter.php) (仅Windows)
+* [QMK Configurator](https://config.qmk.fm/#/test/) (网页版)
+* [Switch Hitter](https://web.archive.org/web/20190413233743/https://elitekeyboards.com/switchhitter.php) (仅Windows)
 * [Keyboard Viewer](https://www.imore.com/how-use-keyboard-viewer-your-mac) (仅Mac)
 * [Keyboard Tester](http://www.keyboardtester.com) (网页版)
 * [Keyboard Checker](http://keyboardchecker.com) (网页版)

drivers/arm/i2c_master.c

@@ -32,27 +32,17 @@
 
 static uint8_t i2c_address;
 
-// ChibiOS uses two initialization structure for v1 and v2/v3 i2c APIs.
-// The F1 series uses the v1 api, which have to initialized this way.
-#ifdef STM32F103xB
-static const I2CConfig i2cconfig = {
-  OPMODE_I2C,
-  400000,
-  FAST_DUTY_CYCLE_2,
-};
-#else
-// This configures the I2C clock to 400khz assuming a 72Mhz clock
-// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
 static const I2CConfig i2cconfig = {
 #ifdef USE_I2CV1
     I2C1_OPMODE,
     I2C1_CLOCK_SPEED,
     I2C1_DUTY_CYCLE,
 #else
+    // This configures the I2C clock to 400khz assuming a 72Mhz clock
+    // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
     STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
 #endif
 };
-#endif
 
 static i2c_status_t chibios_to_qmk(const msg_t* status) {
     switch (*status) {

keyboards/2_milk/keymaps/emoji/config.h

@@ -0,0 +1,2 @@
+#define UNICODE_SELECTED_MODES UC_LNX, UC_OSX, UC_WIN, UC_WINC
+#define TAPPING_TERM 300

keyboards/2_milk/keymaps/emoji/keymap.c

@@ -1,31 +1,53 @@
 #include QMK_KEYBOARD_H
 
-enum custom_keycodes {
-  DISSA,
-  SHRUG
+enum tapdance_keycodes {
+    TD_KEY_1,
+    TD_KEY_2,
+};
+
+void dance_key_one (qk_tap_dance_state_t *state, void *user_data) {
+    if (state->count == 1) {
+        send_unicode_hex_string("00AF 005C 005F 0028 30C4 0029 005F 002F 00AF"); // ¯\_(ツ)_/¯
+        SEND_STRING(SS_TAP(X_ENTER));
+        reset_tap_dance (state);
+    } else if (state->count == 2) {
+        cycle_unicode_input_mode(+1);
+        reset_tap_dance (state);
+    }
+}
+
+void dance_key_two (qk_tap_dance_state_t *state, void *user_data) {
+    if (state->count == 1) {
+        send_unicode_hex_string("0CA0 005F 0CA0"); // ಠ_ಠ
+        SEND_STRING(SS_TAP(X_ENTER));
+        reset_tap_dance (state);
+    } else if (state->count == 2) {
+        send_unicode_hex_string("0028 30CE 0CA0 75CA 0CA0 0029 30CE 5F61 253B 2501 253B"); // (ノಠ痊ಠ)ノ彡┻━┻
+        SEND_STRING(SS_TAP(X_ENTER));
+        reset_tap_dance (state);
+    } else if (state->count == 3) {
+        send_unicode_hex_string("256D 2229 256E 0028 002D 005F 002D 0029 256D 2229 256E"); // ╭∩╮(-_-)╭∩╮
+        SEND_STRING(SS_TAP(X_ENTER));
+        reset_tap_dance (state);
+    } else if (state->count == 4) {
+        send_unicode_hex_string("0028 3065 FFE3 0020 00B3 FFE3 0029 3065"); // (づ￣ ³￣)づ
+        SEND_STRING(SS_TAP(X_ENTER));
+        reset_tap_dance (state);
+    } else if (state->count == 5) {
+        send_unicode_hex_string("0028 FE3A FE39 FE3A 0029"); // (︺︹︺)
+        SEND_STRING(SS_TAP(X_ENTER));
+        reset_tap_dance (state);
+    }
+}
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+    [TD_KEY_1] = ACTION_TAP_DANCE_FN(dance_key_one),
+    [TD_KEY_2] = ACTION_TAP_DANCE_FN(dance_key_two),
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-      [0] = LAYOUT(
-          SHRUG,
-          DISSA
-          )
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case SHRUG:
-      if (record->event.pressed) {
-        send_unicode_hex_string("00AF 005C 005F 0028 30C4 0029 005F 002F 00AF");
-      } else {
-      }
-      break;
-    case DISSA:
-      if (record->event.pressed) {
-          send_unicode_hex_string("0CA0 005F 0CA0");
-      } else {
-      }
-      break;
-  }
-  return true;
+    [0] = LAYOUT(
+        TD(TD_KEY_1),
+        TD(TD_KEY_2)
+    ),
 };

keyboards/2_milk/keymaps/emoji/readme.md

@@ -1,2 +1,39 @@
 # Emoji Keymap
 ![Picture](https://i.imgur.com/1zEZ9Lq.png)
+
+# Unicode Setup
+
+Unicode input in QMK works by inputting a sequence of characters to the 
+OS, sort of like a macro. Unfortunately, the way this is done differs 
+for each platform. Specifically, each platform requires a different 
+combination of keys to trigger Unicode input. Therefore, a 
+corresponding input mode has to be set in QMK.
+
+Documentation: [Feature Unicode](https://beta.docs.qmk.fm/features/feature_unicode#input-modes)
+
+On this keymap the default unicode mode it's `UC_LNX`.
+You can change it permanently tapping 2 times the KeyOne to select the next mode.
+
+## Unicode Mode List
+- UC_LNX
+- UC_OSX
+- UC_WIN
+- UC_WINC
+
+# Keymap
+To add more functionality to this Minimal Keyboard, 
+it's implemented the tap dance feature, so pressing the same key 
+multiples times will produce different emojis.
+
+## Key One
+
+- 1 Tap: `¯\_(ツ)_/¯`
+- 2 Taps: Switch Unicode Input Type
+
+## Key Two
+
+- 1 Tap: `ಠ_ಠ`
+- 2 Taps: `(ノಠ痊ಠ)ノ彡┻━┻`
+- 3 Taps: `╭∩╮(-_-)╭∩╮`
+- 4 Taps: `(づ￣ ³￣)づ`
+- 5 Taps: `(︺︹︺)`

keyboards/2_milk/keymaps/emoji/rules.mk

@@ -0,0 +1,2 @@
+UNICODE_ENABLE = yes	# Unicode
+TAP_DANCE_ENABLE = yes	# Tap Dance

keyboards/40percentclub/nano/keymaps/drashna/keymap.c

@@ -0,0 +1,111 @@
+#include QMK_KEYBOARD_H
+#include "drashna.h"
+#include "analog.c"
+#include "pointing_device.h"
+#include "pincontrol.h"
+
+
+#define KC_X0 LT(_FN, KC_ESC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT(
+     KC_VOLU, KC_MPLY, KC_MPRV, RESET,
+     KC_VOLD, KC_MUTE, KC_MNXT, RESET
+  ),
+
+};
+
+// Joystick
+// Set Pins
+uint8_t xPin  = 8;   // VRx / /B4
+uint8_t yPin  = 7;   // VRy // B5
+uint8_t swPin = E6;  // SW
+
+// Set Parameters
+uint16_t minAxisValue = 0;
+uint16_t maxAxisValue = 1023;
+
+uint8_t maxCursorSpeed = 2;
+uint8_t precisionSpeed = 1;
+uint8_t speedRegulator = 20;  // Lower Values Create Faster Movement
+
+int8_t xPolarity = 1;
+int8_t yPolarity = 1;
+
+uint8_t cursorTimeout = 10;
+
+int16_t xOrigin, yOrigin;
+
+uint16_t lastCursor = 0;
+
+int16_t axisCoordinate(uint8_t pin, uint16_t origin) {
+    int8_t direction;
+    int16_t distanceFromOrigin;
+    int16_t range;
+
+    int16_t position = analogRead(pin);
+
+    if (origin == position) {
+        return 0;
+    } else if (origin > position) {
+        distanceFromOrigin = origin - position;
+        range              = origin - minAxisValue;
+        direction          = -1;
+    } else {
+        distanceFromOrigin = position - origin;
+        range              = maxAxisValue - origin;
+        direction          = 1;
+    }
+
+    float percent    = (float)distanceFromOrigin / range;
+    int16_t   coordinate = (int16_t)(percent * 100);
+    if (coordinate < 0) {
+        return 0;
+    } else if (coordinate > 100) {
+        return 100 * direction;
+    } else {
+        return coordinate * direction;
+    }
+}
+
+int8_t axisToMouseComponent(uint8_t pin, int16_t origin, uint8_t maxSpeed, int8_t polarity) {
+    int coordinate = axisCoordinate(pin, origin);
+    if (coordinate == 0) {
+        return 0;
+    } else {
+        float percent = (float)coordinate / 100;
+        if (keyboard_report->mods & MOD_BIT(KC_LSFT)) {
+            return percent * precisionSpeed * polarity * (abs(coordinate) / speedRegulator);
+        } else {
+            return percent * maxCursorSpeed * polarity * (abs(coordinate) / speedRegulator);
+        }
+    }
+}
+
+void pointing_device_task(void) {
+    report_mouse_t report = pointing_device_get_report();
+
+    // todo read as one vector
+    if (timer_elapsed(lastCursor) > cursorTimeout) {
+        lastCursor = timer_read();
+        report.x   = axisToMouseComponent(xPin, xOrigin, maxCursorSpeed, xPolarity);
+        report.y   = axisToMouseComponent(yPin, yOrigin, maxCursorSpeed, yPolarity);
+    }
+    //
+    if (!readPin(swPin)) {
+        report.buttons |= MOUSE_BTN1;
+    } else {
+        report.buttons &= ~MOUSE_BTN1;
+    }
+
+    pointing_device_set_report(report);
+    pointing_device_send();
+}
+
+void matrix_init_keymap(void) {
+    // init pin? Is needed?
+    setPinInputHigh(swPin);
+    // Account for drift
+    xOrigin = analogRead(xPin);
+    yOrigin = analogRead(yPin);
+}

keyboards/40percentclub/nano/keymaps/drashna/rules.mk

@@ -0,0 +1,5 @@
+POINTING_DEVICE_ENABLE 		= yes
+RGBLIGHT_ENABLE          	= no
+CONSOLE_ENABLE 				= no
+
+BOOTLOADER 					= qmk-dfu

keyboards/angel17/alpha/rules.mk

@@ -1,27 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/angel17/rev1/rules.mk

@@ -1,27 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/bm43a/bm43a.c

@@ -0,0 +1,51 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bm43a.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/bm43a/bm43a.h

@@ -0,0 +1,30 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B,   \
+    K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1B,       \
+    K20,      K21, K22, K23, K24, K25, K26, K27, K28, K29, K2B,   \
+    K30, K31, K32, K33,         K35,        K37, K38, K39, K3B    \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   KC_NO, K1B   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   KC_NO, K2B   }, \
+    { K30,   K31,   K32,   K33,   KC_NO, K35,   KC_NO, K37,   K38,   K39,   KC_NO, K3B   }, \
+}

keyboards/bm43a/config.h

@@ -0,0 +1,73 @@
+/*
+Copyright 2019 mechmerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KPRepublic
+#define PRODUCT         BM43A
+#define DESCRIPTION     A QMK-powered custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D1, F4, F1, F0 }
+#define MATRIX_COL_PINS { B0, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
+
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+    #define RGBLED_NUM 10
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+    #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+    #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//     #define RGBLIGHT_EFFECT_BREATHING
+//     #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//     #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//     #define RGBLIGHT_EFFECT_SNAKE
+//     #define RGBLIGHT_EFFECT_KNIGHT
+//     #define RGBLIGHT_EFFECT_CHRISTMAS
+//     #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//     #define RGBLIGHT_EFFECT_RGB_TEST
+//     #define RGBLIGHT_EFFECT_ALTERNATING
+#endif

keyboards/bm43a/info.json

@@ -0,0 +1,58 @@
+{
+    "keyboard_name": "BM43A",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 12,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "key_count": 43,
+            "layout": [
+                {"label":"K00 (D1,B0)", "x":0, "y":0},
+                {"label":"K01 (D1,F5)", "x":1, "y":0},
+                {"label":"K02 (D1,F6)", "x":2, "y":0},
+                {"label":"K03 (D1,F7)", "x":3, "y":0},
+                {"label":"K04 (D1,C7)", "x":4, "y":0},
+                {"label":"K05 (D1,C6)", "x":5, "y":0},
+                {"label":"K06 (D1,B6)", "x":6, "y":0},
+                {"label":"K07 (D1,B5)", "x":7, "y":0},
+                {"label":"K08 (D1,B4)", "x":8, "y":0},
+                {"label":"K09 (D1,D7)", "x":9, "y":0},
+                {"label":"K0A (D1,D6)", "x":10, "y":0},
+                {"label":"K0B (D1,D4)", "x":11, "y":0},
+                {"label":"K10 (F4,B0)", "x":0, "y":1, "w":1.25},
+                {"label":"K11 (F4,F5)", "x":1.25, "y":1},
+                {"label":"K12 (F4,F6)", "x":2.25, "y":1},
+                {"label":"K13 (F4,F7)", "x":3.25, "y":1},
+                {"label":"K14 (F4,C7)", "x":4.25, "y":1},
+                {"label":"K15 (F4,C6)", "x":5.25, "y":1},
+                {"label":"K16 (F4,B6)", "x":6.25, "y":1},
+                {"label":"K17 (F4,B5)", "x":7.25, "y":1},
+                {"label":"K18 (F4,B4)", "x":8.25, "y":1},
+                {"label":"K19 (F4,D7)", "x":9.25, "y":1},
+                {"label":"K1B (F4,D4)", "x":10.25, "y":1, "w":1.75},
+                {"label":"K20 (F1,B0)", "x":0, "y":2, "w":2},
+                {"label":"K21 (F1,F5)", "x":2, "y":2},
+                {"label":"K22 (F1,F6)", "x":3, "y":2},
+                {"label":"K23 (F1,F7)", "x":4, "y":2},
+                {"label":"K24 (F1,C7)", "x":5, "y":2},
+                {"label":"K25 (F1,C6)", "x":6, "y":2},
+                {"label":"K26 (F1,B6)", "x":7, "y":2},
+                {"label":"K27 (F1,B5)", "x":8, "y":2},
+                {"label":"K28 (F1,B4)", "x":9, "y":2},
+                {"label":"K29 (F1,D7)", "x":10, "y":2},
+                {"label":"K2B (F1,D4)", "x":11, "y":2},
+                {"label":"K30 (F0,B0)", "x":0, "y":3},
+                {"label":"K31 (F0,F5)", "x":1, "y":3},
+                {"label":"K32 (F0,F6)", "x":2, "y":3},
+                {"label":"K33 (F0,F7)", "x":3, "y":3, "w":2.75},
+                {"label":"K35 (F0,C6)", "x":5.75, "y":3, "w":2.25},
+                {"label":"K37 (F0,B5)", "x":8, "y":3},
+                {"label":"K38 (F0,B4)", "x":9, "y":3},
+                {"label":"K39 (F0,D7)", "x":10, "y":3},
+                {"label":"K3B (F0,D4)", "x":11, "y":3}
+            ]
+        }
+    }
+    ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
+}

keyboards/bm43a/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/bm43a/keymaps/default/keymap.c

@@ -0,0 +1,33 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+        KC_TAB,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_UP,   KC_DOT,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,                 KC_SPC,              MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT(
+        RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,   BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, _______, _______, _______, _______, _______, _______,
+        _______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______,
+        _______, _______, _______, _______,                _______,             _______, _______, _______, _______
+    ),
+
+};
+

keyboards/bm43a/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for bm43a

keyboards/bm43a/readme.md

@@ -0,0 +1,16 @@
+# bm43a
+
+A 40% mechanical keyboard.  
+
+This firmware was originally taken from a kbfirmware.json and converted through [kbf_qmk_converter](https://noroadsleft.github.io/kbf_qmk_converter/). You may find the original `.json` files [here](https://drive.google.com/drive/folders/11DowBYrFN_uCNa9Q9bXwuMn91vmZYBcG).  
+
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: bm43a PCB    
+Hardware Availability: [KPRepublic](https://kprepublic.com/products/bm43a-bm43-43-keys-40-custom-mechanical-keyboard-pcb-programmed-numpad-layouts-qmk-firmware-with-rgb-bottom-underglow-alps-mx)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bm43a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bm43a/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/c39/keymaps/drashna/config.h

@@ -0,0 +1,7 @@
+#pragma once
+
+// place overrides here
+#undef MATRIX_COL_PINS
+#define MATRIX_COL_PINS { A3, A2, A1, A0, B13, B14, B15, B9, B3, B2, B4, A10, A9 }
+#undef MATRIX_ROW_PINS
+#define MATRIX_ROW_PINS { B7, B1, B0 }

keyboards/c39/keymaps/drashna/keymap.c

@@ -0,0 +1,45 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _FN1 1
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,----------------------------------------------------------------------------.  ,-------------.
+ * |   Q  |   W  |   E  |   R  |   T  | Bksp |   Y  |   U  |   I  |   O  |   P  |  |  M1  |  M2  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   A  |   S  |   D  |   F  |   G  | Enter|   H  |   J  |   K  |   L  |   ;  |  |  M3  |  M4  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   Z  |   X  |   C  |   V  |   B  |  FN1 |   N  |   M  |   ,  |   .  |   /  |  |  M5  |  M6  |
+ * `----------------------------------------------------------------------------'  `-------------'
+ */
+[_QWERTY] = LAYOUT(
+    KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC,                KC_Y, KC_U, KC_I,    KC_O,   KC_P,      KC_1, KC_2,
+    KC_A, KC_S, KC_D, KC_F, KC_G, MT(MOD_LSFT, KC_ENT),   KC_H, KC_J, KC_K,    KC_L,   KC_SCLN,   KC_3, KC_4,
+    KC_Z, KC_X, KC_C, KC_V, KC_B, LT(_FN1, KC_SPC),       KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,   KC_5, KC_6
+),
+
+/* FN1
+ * ,----------------------------------------------------------------------------.  ,-------------.
+ * |   1  |   2  |   3  |   4  |   5  | Bksp |   6  |   7  |   8  |   9  |   0  |  |  M1  |  M2  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   4  |   5  |   6  |   +  |      | Enter|      |      |      |      |      |  |  M3  |  M4  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   7  |   8  |   9  |   0  |      |  FN1 |      |      |      |      |      |  |  M5  |  M6  |
+ * `----------------------------------------------------------------------------'  `-------------'
+ */
+[_FN1] = LAYOUT(
+    KC_1, KC_2, KC_3, KC_4,    KC_5,    KC_BSPC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,      KC_1, KC_2,
+    KC_4, KC_5, KC_6, KC_PLUS, _______, KC_ENT,  _______, _______, _______, _______, _______,   KC_3, KC_4,
+    KC_7, KC_8, KC_9, KC_0,    _______, _______, _______, _______, _______, _______, _______,   KC_5, KC_6
+),
+};

keyboards/c39/keymaps/drashna/readme.md

@@ -0,0 +1,3 @@
+# @drashna's keymap for the C39
+
+HERE BE DRAGONS

keyboards/c39/keymaps/drashna/rules.mk

@@ -0,0 +1,18 @@
+MCU = STM32F303
+BOOTLOADER =
+
+BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = yes         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = yes           # Audio output on port C6
+RGBLIGHT_ENABLE = no        # RGB Enable / Disable

keyboards/clueboard/60/led.c

@@ -16,21 +16,21 @@
 */
 
 #include "hal.h"
-#include "backlight.h"
 #include "led.h"
 #include "printf.h"
 
+#ifdef BACKLIGHT_ENABLE
+#include "backlight.h"
+
 void backlight_init_ports(void) {
     printf("backlight_init_ports()\n");
-    #ifdef BACKLIGHT_ENABLE
+
     palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL);
     palSetPad(GPIOB, 8);
-    #endif
 }
 
 void backlight_set(uint8_t level) {
     printf("backlight_set(%d)\n", level);
-    #ifdef BACKLIGHT_ENABLE
     if (level == 0) {
         // Turn backlight off
         palSetPad(GPIOB, 8);
@@ -38,8 +38,8 @@ void backlight_set(uint8_t level) {
         // Turn backlight on
         palClearPad(GPIOB, 8);
     }
-    #endif
 }
+#endif
 
 void led_set_kb(uint8_t usb_led) {
     printf("led_set_kb(%d)\n", usb_led);

keyboards/clueboard/card/rules.mk

@@ -11,7 +11,6 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
 # Build Options
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes      # Mouse keys(+4700)

keyboards/converter/usb_usb/README.md

@@ -36,18 +36,18 @@ https://geekhack.org/index.php?topic=69169.0
 
 ### Build one yourself using Arduino Leonardo + Circuit@Home USB Host Shield 2.0
 Buying Arduino Leonardo and USB Host Shield 2.0(from Circuit@home) will be better, you won't need even soldering iron.
-http://arduino.cc/en/Main/ArduinoBoardLeonardo
-https://www.circuitsathome.com/arduino_usb_host_shield_projects/
+- http://arduino.cc/en/Main/ArduinoBoardLeonardo
+- https://www.circuitsathome.com/arduino_usb_host_shield_projects/
 
 Other compatible boards like Arduino's Shield will also work well but I think Sparkfun's needs to be modified.
-http://arduino.cc/en/Main/ArduinoUSBHostShield
-https://www.sparkfun.com/products/9947
+- http://arduino.cc/en/Main/ArduinoUSBHostShield
+- https://www.sparkfun.com/products/9947
 
 Also Pro Micro 3.3V(not Mini) or Teensy with mini host shield will work with some fixes on signal/power routing.
-[Build guide](https://geekhack.org/index.php?topic=80421.0)
-https://www.circuitsathome.com/arduino_usb_host_shield_projects/
-https://www.sparkfun.com/products/12587
-https://www.pjrc.com/teensy/td_libs_USBHostShield.html
+- [Build guide](https://geekhack.org/index.php?topic=80421.0)
+- https://www.circuitsathome.com/arduino_usb_host_shield_projects/
+- https://www.sparkfun.com/products/12587
+- https://www.pjrc.com/teensy/td_libs_USBHostShield.html
 
 Limitations
 ----------
@@ -56,24 +56,14 @@ Note that the converter can host only USB "boot protocol" keyboard(6KRO), not NK
 
 Resources
 --------
-Hasu's main thread for the converter
-    https://geekhack.org/index.php?topic=69169.0
-Build guide for the Pro Micro variant
-    https://geekhack.org/index.php?topic=80421.0
-Original TMK version of the converter
-    https://github.com/tmk/tmk_keyboard/tree/master/converter/usb_usb
-USB Host Shield 2.0
-    https://www.circuitsathome.com/arduino_usb_host_shield_projects/
-USB Host Shield 2.0 source
-    https://github.com/felis/USB_Host_Shield_2.0
-Arduino USB Host Shield (with bootst converter)
-    http://arduino.cc/en/Main/ArduinoUSBHostShield
-Arduino source
-    https://github.com/arduino/Arduino
-Initial release of TMK USB-USB converter
-    https://geekhack.org/index.php?topic=33057.msg653549#msg653549
-    http://deskthority.net/workshop-f7/is-remapping-a-usb-keyboard-using-teensy-possible-t2841-30.html#p74854
-Arduino-based hardware keyboard remapper - Colemak forum
-    http://forum.colemak.com/viewtopic.php?id=1561
-Teensy + Host Shield
-    http://www.pjrc.com/teensy/td_libs_USBHostShield.html
+- [Hasu's main thread for the converter](https://geekhack.org/index.php?topic=69169.0)
+- [Build guide for the Pro Micro variant](https://geekhack.org/index.php?topic=80421.0)
+- [Original TMK version of the converter](https://github.com/tmk/tmk_keyboard/tree/master/converter/usb_usb)
+- [USB Host Shield 2.0](https://www.circuitsathome.com/arduino_usb_host_shield_projects/)
+- [USB Host Shield 2.0 source](https://github.com/felis/USB_Host_Shield_2.0)
+- [Arduino USB Host Shield (with bootst converter)](http://arduino.cc/en/Main/ArduinoUSBHostShield)
+- [Arduino source](https://github.com/arduino/Arduino)
+- [Initial release of TMK USB-USB converter](https://geekhack.org/index.php?topic=33057.msg653549#msg653549)
+- [Teensy/Arduino + Host Shield](http://deskthority.net/workshop-f7/is-remapping-a-usb-keyboard-using-teensy-possible-t2841-30.html#p74854)
+- [Arduino-based hardware keyboard remapper - Colemak forum](http://forum.colemak.com/viewtopic.php?id=1561)
+- [Teensy + Host Shield](http://www.pjrc.com/teensy/td_libs_USBHostShield.html)

keyboards/converter/usb_usb/keymaps/narze/README.md

@@ -0,0 +1,10 @@
+# narze's layout for usb-usb converter
+
+## Key features
+- Qwerty + [Colemak](https://colemak.com) layouts, and you can type Qwerty on software-level Colemak as well. Very useful for gaming or when your friend wanna type something but don't use Colemak.
+- [(S)uper (D)uper Mode](https://github.com/jasonrudolph/keyboard#super-duper-mode) inspired by [jasonrudolph](https://github.com/jasonrudolph), with [some extensions](https://gist.github.com/narze/861e2167784842d38771) such as backspace & forward delete.
+
+## Build instructions
+- `cd /path/to/qmk_firmware`
+- Ensure latest libraries are loaded `make git-submodule`
+- Build & flash : `make converter/usb_usb:narze:flash`

keyboards/converter/usb_usb/keymaps/narze/config.h

@@ -0,0 +1,48 @@
+#pragma once
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+#undef TAPPING_TERM
+#define TAPPING_TERM 100
+
+#define COMBO_TERM 20
+#define COMBO_COUNT 1
+
+#define IGNORE_MOD_TAP_INTERRUPT
+#define PERMISSIVE_HOLD
+
+#define SUPER_DUPER_SOUND S__NOTE(_B1)
+
+#define MOUSEKEY_DELAY 100
+
+#define USB_POLLING_INTERVAL_MS 1
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif

keyboards/converter/usb_usb/keymaps/narze/keymap.c

@@ -0,0 +1,167 @@
+#include QMK_KEYBOARD_H
+#include "narze.h"
+#include "keymap_colemak.h"
+
+enum usb_usb_layers {
+    _QWERTY,
+    _COLEMAK,
+    _QWOC,
+    _SUPERDUPER,
+};
+
+enum usb_usb_keycodes {
+    QWERTY = SAFE_RANGE,
+    COLEMAK,
+    QWOC,
+    SUPERDUPER,
+    SDTOGG, // Toggle SuperDuper
+    GUI_UNDS,
+    LSFT_LPRN,
+    RSFT_RPRN,
+};
+
+#define HPR_ESC ALL_T(KC_ESC)
+#define SFT_ENT SFT_T(KC_ENT)
+#define BRWS_L S(LGUI(KC_LBRC))
+#define BRWS_R S(LGUI(KC_RBRC))
+
+enum process_combo_event {
+    CB_SUPERDUPER,
+};
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+    /* 0: plain Qwerty without layer switching
+     *         ,---------------. ,---------------. ,---------------.
+     *         |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24|
+     * ,---.   |---------------| |---------------| |---------------| ,-----------. ,---------------. ,-------.
+     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|Pwr| | Help  |
+     * `---'   `---------------' `---------------' `---------------' `-----------' `---------------' `-------'
+     * ,-----------------------------------------------------------. ,-----------. ,---------------. ,-------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|JPY|Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -| |Stp|Agn|
+     * |-----------------------------------------------------------| |-----------| |---------------| |-------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | |Del|End|PgD| |  7|  8|  9|  +| |Mnu|Und|
+     * |-----------------------------------------------------------| `-----------' |---------------| |-------|
+     * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  :|  #|Retn|               |  4|  5|  6|KP,| |Sel|Cpy|
+     * |-----------------------------------------------------------|     ,---.     |---------------| |-------|
+     * |Shft|  <|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /| RO|Shift |     |Up |     |  1|  2|  3|KP=| |Exe|Pst|
+     * |-----------------------------------------------------------| ,-----------. |---------------| |-------|
+     * |Ctl|Gui|Alt|MHEN|HNJ| Space  |H/E|HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| |  0    |  .|Ent| |Fnd|Cut|
+     * `-----------------------------------------------------------' `-----------' `---------------' `-------'
+     */
+    [_QWERTY] = LAYOUT_all(
+                      KC_F13,  KC_F14,  KC_F15,  KC_F16, KC_F17, KC_F18, KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,               KC_PSCR, KC_SLCK, KC_PAUS,    KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR,     KC_HELP,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_JYEN, KC_BSPC,     KC_INS,  KC_HOME, KC_PGUP,    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,    KC_STOP, KC_AGIN,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,     KC_DEL,  KC_END,  KC_PGDN,    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,    KC_MENU, KC_UNDO,
+    HPR_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_NUHS, KC_ENT,                                    KC_P4,   KC_P5,   KC_P6,   KC_PCMM,    KC_SLCT, KC_COPY,
+    LSFT_LPRN,KC_NUBS,KC_Z,    KC_X,    KC_C,    KC_V,   KC_B,   KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RO,   RSFT_RPRN,            KC_UP,               KC_P1,   KC_P2,   KC_P3,   KC_PEQL,    KC_EXEC, KC_PSTE,
+    KC_LCTL, KC_LALT, GUI_UNDS,KC_MHEN, KC_HANJ,         KC_SPC,         KC_HAEN, KC_HENK, KC_KANA, KC_BSPC, KC_RALT, KC_APP,  KC_RCTL,     KC_LEFT, KC_DOWN, KC_RGHT,    KC_P0,            KC_PDOT, KC_PENT,    KC_FIND, KC_CUT
+    ),
+    [_COLEMAK] = LAYOUT_all(
+                      KC_F13,  KC_F14,  KC_F15,  KC_F16, KC_F17, KC_F18, KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,               KC_PSCR, KC_SLCK, KC_PAUS,    KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR,     KC_HELP,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_JYEN, KC_BSPC,     KC_INS,  KC_HOME, KC_PGUP,    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,    KC_STOP, KC_AGIN,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,     KC_DEL,  KC_END,  KC_PGDN,    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,    KC_MENU, KC_UNDO,
+    HPR_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_NUHS, KC_ENT,                                    KC_P4,   KC_P5,   KC_P6,   KC_PCMM,    KC_SLCT, KC_COPY,
+    LSFT_LPRN,KC_NUBS,KC_Z,    KC_X,    KC_C,    KC_V,   KC_B,   KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RO,   RSFT_RPRN,            KC_UP,               KC_P1,   KC_P2,   KC_P3,   KC_PEQL,    KC_EXEC, KC_PSTE,
+    KC_LCTL, KC_LALT, GUI_UNDS,KC_MHEN, KC_HANJ,         KC_SPC,         KC_HAEN, KC_HENK, KC_KANA, KC_BSPC, KC_RALT, KC_APP,  KC_RCTL,     KC_LEFT, KC_DOWN, KC_RGHT,    KC_P0,            KC_PDOT, KC_PENT,    KC_FIND, KC_CUT
+    ),
+    [_QWOC] = LAYOUT_all(
+                      KC_F13,  KC_F14,  KC_F15,  KC_F16, KC_F17, KC_F18, KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,               KC_PSCR, KC_SLCK, KC_PAUS,    KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR,     KC_HELP,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_JYEN, KC_BSPC,     KC_INS,  KC_HOME, KC_PGUP,    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,    KC_STOP, KC_AGIN,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,     KC_DEL,  KC_END,  KC_PGDN,    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,    KC_MENU, KC_UNDO,
+    HPR_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_NUHS, KC_ENT,                                    KC_P4,   KC_P5,   KC_P6,   KC_PCMM,    KC_SLCT, KC_COPY,
+    LSFT_LPRN,KC_NUBS,KC_Z,    KC_X,    KC_C,    KC_V,   KC_B,   KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RO,   RSFT_RPRN,            KC_UP,               KC_P1,   KC_P2,   KC_P3,   KC_PEQL,    KC_EXEC, KC_PSTE,
+    KC_LCTL, KC_LALT, GUI_UNDS,KC_MHEN, KC_HANJ,         KC_SPC,         KC_HAEN, KC_HENK, KC_KANA, KC_BSPC, KC_RALT, KC_APP,  KC_RCTL,     KC_LEFT, KC_DOWN, KC_RGHT,    KC_P0,            KC_PDOT, KC_PENT,    KC_FIND, KC_CUT
+    ),
+    [_SUPERDUPER] = LAYOUT_all(
+                      ______,  ______,  ______, ______, ______,  ______,  ______, ______,  ______, ______, ______, ______,
+    RESET,            ______,  ______,  ______, ______, ______,  ______,  ______, ______,  ______, ______, ______, ______,             ______,______,______,    ______,______,______,______,    ______,
+    ______,  ______,  ______,  ______,  ______, ______, ______,  ______,  ______, ______,  ______, ______, ______, ______, ______,     ______,______,______,    ______,______,______,______,    ______,______,
+    ______,  ______,  ______,  ______,  ______, ______, ______,  ______,  BRWS_L, BRWS_R, ______, ______, ______,         ______,     ______,______,______,    ______,______,______,______,    ______,______,
+    KC_SPC, KC_LALT, _______, _______, KC_BSPC,KC_LGUI,KC_LEFT, KC_DOWN,   KC_UP,KC_RGHT,  KC_DEL, ______,         ______, ______,                              ______,______,______,______,    ______,______,
+    ______,  ______,  ______,  ______,  ______, ______, ______,  ______,  ______, ______,  ______, ______,         ______, ______,            ______,           ______,______,______,______,    ______,______,
+    ______,  ______,  ______,  ______,  ______,         KC_LSFT,           ______, ______,  ______, ______, ______, ______, ______,     ______,______,______,    ______,       ______,______,    ______,______
+    ),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case QWERTY:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_QWERTY);
+
+                set_superduper_key_combo_layer(_QWERTY);
+            }
+            return false;
+
+        case COLEMAK:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_COLEMAK);
+
+                set_superduper_key_combo_layer(_COLEMAK);
+            }
+            return false;
+
+        case QWOC:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_QWOC);
+
+                set_superduper_key_combo_layer(_QWOC);
+            }
+            return false;
+
+        case SDTOGG:
+            if (record->event.pressed) {
+                toggle_superduper_mode();
+            }
+            return false;
+
+        // Macros
+
+        // 1. Hold for LGUI, tap for Underscore
+        case GUI_UNDS:
+            perform_space_cadet(record, KC_LGUI, KC_LSFT, KC_MINS);
+            return false;
+
+        // 2. Hold for LSHIFT, tap for Parens open
+        case LSFT_LPRN:
+            perform_space_cadet(record, KC_LSFT, KC_LSFT, KC_9);
+            return false;
+
+        // 3. Hold for RSHIFT, tap for Parens close
+        case RSFT_RPRN:
+            perform_space_cadet(record, KC_RSFT, KC_RSFT, KC_0);
+            return false;
+
+        default:
+            return true;
+    }
+    return true;
+}
+
+void matrix_setup(void) {
+    set_superduper_key_combos();
+}
+
+void process_combo_event(uint8_t combo_index, bool pressed) {
+    if (pressed) {
+        switch(combo_index) {
+            case CB_SUPERDUPER:
+                layer_on(_SUPERDUPER);
+                break;
+        }
+    } else {
+        layer_off(_SUPERDUPER);
+        unregister_mods(MOD_BIT(KC_LGUI) | MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT)); // Sometimes mods are held, unregister them
+    }
+}

keyboards/converter/usb_usb/keymaps/narze/rules.mk

@@ -0,0 +1,3 @@
+EXTRAKEY_ENABLE = no
+NKRO_ENABLE = yes
+COMBO_ENABLE = yes

keyboards/crkbd/keymaps/drashna/config.h

@@ -41,7 +41,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 5
-#    define RGBLIGHT_LIMIT_VAL 150
+#    define RGBLIGHT_LIMIT_VAL 120
 #endif
 
 #ifdef RGB_MATRIX_ENABLE
@@ -51,7 +51,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #    define RGB_MATRIX_HUE_STEP 8
 #    define RGB_MATRIX_SAT_STEP 8
 #    define RGB_MATRIX_VAL_STEP 5
@@ -60,7 +60,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef AUDIO_ENABLE
 #    define B6_AUDIO
-// #define NO_MUSIC_MODE
+#    define NO_MUSIC_MODE
+#endif
+
+#ifdef HAPTIC_ENABLE
+#    define SOLENOID_PIN B7
 #endif
 
 #undef PRODUCT

keyboards/crkbd/keymaps/drashna/keymap.c

@@ -12,7 +12,25 @@ extern rgblight_config_t rgblight_config;
 static uint32_t        oled_timer = 0;
 static char     keylog_str[6]   = {};
 static uint16_t log_timer       = 0;
-static const char code_to_name[60] = {' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', 'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\', '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
+static const char PROGMEM code_to_name[0xFF] = {
+//   0    1    2    3    4    5    6    7    8    9    A    B    c    D    E    F
+    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l',  // 0x
+    'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2',  // 1x
+    '3', '4', '5', '6', '7', '8', '9', '0',  20,  19,  27,  26,  22, '-', '=', '[',  // 2x
+    ']','\\', '#', ';','\'', '`', ',', '.', '/', 128, ' ', ' ', ' ', ' ', ' ', ' ',  // 3x
+    ' ', ' ', ' ', ' ', ' ', ' ', 'P', 'S', ' ', ' ', ' ', ' ',  16, ' ', ' ', ' ',  // 4x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 5x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 6x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 7x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 8x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 9x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Ax
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Bx
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Cx
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Dx
+    'C', 'S', 'A', 'C', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Ex
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' '        // Fx
+};
 
 void add_keylog(uint16_t keycode);
 #endif
@@ -27,7 +45,7 @@ enum crkbd_keycodes { RGBRST = NEW_SAFE_RANGE };
   ) \
   LAYOUT_wrapper( \
     KC_ESC,  K01,    K02,     K03,      K04,     K05,                        K06,     K07,     K08,     K09,     K0A,     KC_MINS, \
-    KC_TAB, ALT_T(K11),  K12, K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
+    ALT_T(KC_TAB), K11,  K12, K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
     OS_LSFT, CTL_T(K21), K22, K23,      K24,     K25,                        K26,     K27,     K28,     K29, RCTL_T(K2A), OS_RSFT, \
                                         KC_GRV,  KC_SPC,  BK_LWER, DL_RAIS,  KC_ENT,  OS_RGUI                                      \
   )
@@ -107,7 +125,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_MAKE, _________________ADJUST_L1_________________,                    _________________ADJUST_R1_________________, KC_RESET,
     VRSN,    _________________ADJUST_L2_________________,                    _________________ADJUST_R2_________________, EEP_RST,
     MG_NKRO, _________________ADJUST_L3_________________,                    _________________ADJUST_R3_________________, RGB_IDL,
-                                     _______, KC_NUKE, _______,        _______, TG_MODS, _______
+                                     HPT_TOG, KC_NUKE, _______,        _______, TG_MODS, HPT_FBK
   )
 };
 // clang-format on
@@ -131,16 +149,18 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
 oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; }
 
 void add_keylog(uint16_t keycode) {
-    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) {
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX) || (keycode >= QK_MODS && keycode <= QK_MODS_MAX)) {
         keycode = keycode & 0xFF;
+    } else if (keycode > 0xFF) {
+        keycode = 0;
     }
 
     for (uint8_t i = 4; i > 0; --i) {
         keylog_str[i] = keylog_str[i - 1];
     }
 
-    if (keycode < 60) {
-        keylog_str[0] = code_to_name[keycode];
+    if (keycode < (sizeof(code_to_name) / sizeof(char))) {
+        keylog_str[0] = pgm_read_byte(&code_to_name[keycode]);
     }
 
     log_timer = timer_read();
@@ -148,7 +168,7 @@ void add_keylog(uint16_t keycode) {
 
 void update_log(void) {
     if (timer_elapsed(log_timer) > 750) {
-        add_keylog(0);
+        //add_keylog(0);
     }
 }
 
@@ -197,19 +217,18 @@ void render_layer_state(void) {
 void render_keylock_status(uint8_t led_usb_state) {
     oled_write_P(PSTR("Lock:"), false);
     oled_write_P(PSTR(" "), false);
-    oled_write_P(PSTR("NUM "), led_usb_state & (1 << USB_LED_NUM_LOCK));
-    oled_write_P(PSTR(" "), false);
-    oled_write_P(PSTR("CAPS"), led_usb_state & (1 << USB_LED_CAPS_LOCK));
-    oled_write_P(PSTR(" "), false);
-    oled_write_P(PSTR("SCRL"), led_usb_state & (1 << USB_LED_SCROLL_LOCK));
+    oled_write_P(PSTR("N"), led_usb_state & (1 << USB_LED_NUM_LOCK));
+    oled_write_P(PSTR("C"), led_usb_state & (1 << USB_LED_CAPS_LOCK));
+    oled_write_ln_P(PSTR("S"), led_usb_state & (1 << USB_LED_SCROLL_LOCK));
 }
 
 void render_mod_status(uint8_t modifiers) {
     oled_write_P(PSTR("Mods:"), false);
-    oled_write_P(PSTR(" SHFT"), (modifiers & MOD_MASK_SHIFT));
-    oled_write_P(PSTR(" CTRL"), (modifiers & MOD_MASK_CTRL));
-    oled_write_P(PSTR(" ALT "), (modifiers & MOD_MASK_ALT));
-    oled_write_P(PSTR(" GUI "), (modifiers & MOD_MASK_GUI));
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("S"), (modifiers & MOD_MASK_SHIFT));
+    oled_write_P(PSTR("C"), (modifiers & MOD_MASK_CTRL));
+    oled_write_P(PSTR("A"), (modifiers & MOD_MASK_ALT));
+    oled_write_P(PSTR("G"), (modifiers & MOD_MASK_GUI));
 }
 
 void render_bootmagic_status(void) {

keyboards/crkbd/keymaps/drashna/rules.mk

@@ -18,6 +18,7 @@ RGBLIGHT_ENABLE            = no  # Enable WS2812 RGB underlight.
 SWAP_HANDS_ENABLE          = no  # Enable one-hand typing
 RGB_MATRIX_ENABLE = WS2812
 
+HAPTIC_ENABLE = SOLENOID
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/crkbd/keymaps/hvp/config.h

@@ -0,0 +1,50 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+//#define TAPPING_FORCE_HOLD
+//#define TAPPING_TERM 100
+
+#define TAPPING_TERM 150
+#define PERMISSIVE_HOLD
+#define IGNORE_MOD_TAP_INTERRUPT
+
+#ifdef RGBLIGHT_ENABLE
+#    undef RGBLED_NUM
+#    define RGBLIGHT_ANIMATIONS
+#    define RGBLED_NUM 27
+#    define RGBLIGHT_LIMIT_VAL 120
+#    define RGBLIGHT_HUE_STEP 10
+#    define RGBLIGHT_SAT_STEP 17
+#    define RGBLIGHT_VAL_STEP 17
+#endif

keyboards/crkbd/keymaps/hvp/keymap.c

@@ -0,0 +1,183 @@
+#include QMK_KEYBOARD_H
+#include "hvp.c"
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 3
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+     KC_TAB,  KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,                   KC_Y,  KC_U,  KC_I,  KC_O,  KC_P,KC_BSPC,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    LT(_ADJUST, KC_ESC),  KC_A,  KC_S,  KC_D,  LT(_RAISE,KC_F),  MT(MOD_LCTL,KC_G), KC_H,  KC_J,  KC_K,  KC_L,TD(TD1),TD(TD2),\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_LCTL,  KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,                   KC_N,  KC_M,KC_COMM,KC_DOT,TD(TD3),KC_SFTENT,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC),   LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+                              //`--------------------'  `--------------------'
+  ),
+  
+  [_RAISE] = LAYOUT( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+     KC_TAB,  KC_1,  KC_2,  KC_3,  KC_4,  KC_5,                   KC_6,  KC_7,  KC_8,  KC_9,  KC_0,KC_BSPC,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT,KC_NO, KC_DEL,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                  KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_NO, KC_NO,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC),   LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_LOWER] = LAYOUT( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+     KC_TAB,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC,              KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                KC_MINS,KC_EQL,KC_LCBR,KC_RCBR,KC_PIPE,KC_GRV,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                KC_UNDS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS,KC_TILD,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC),   LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_ADJUST] = LAYOUT( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+      KC_F1,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,                  KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,                 KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    RESET,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,                 KC_MPLY, KC_MNXT, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC),   LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+                              //`--------------------'  `--------------------'
+  )
+};
+
+int RGB_current_mode;
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+void matrix_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+    #ifdef SSD1306OLED
+        iota_gfx_init(!has_usb());   // turns on the display
+    #endif
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+// const char *read_mode_icon(bool swap);
+// const char *read_host_led_state(void);
+// void set_timelog(void);
+// const char *read_timelog(void);
+
+void matrix_scan_user(void) {
+   iota_gfx_task();
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+  if (is_master) {
+    // If you want to change the display of OLED, you need to change here
+    matrix_write_ln(matrix, read_layer_state());
+    matrix_write_ln(matrix, read_keylog());
+    //matrix_write_ln(matrix, read_keylogs());
+    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
+    //matrix_write_ln(matrix, read_host_led_state());
+    //matrix_write_ln(matrix, read_timelog());
+  } else {
+    matrix_write(matrix, read_logo());
+  }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+  matrix_clear(&matrix);
+  matrix_render_user(&matrix);
+  matrix_update(&display, &matrix);
+}
+#endif//SSD1306OLED
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+#ifdef SSD1306OLED
+    set_keylog(keycode, record);
+#endif
+    // set_timelog();
+  }
+
+  switch (keycode) {
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+      break;
+  }
+  return true;
+}

keyboards/crkbd/keymaps/hvp/readme.md

@@ -0,0 +1,5 @@
+Keymap to be used with Eurkey for easy access to swedish characters on first layer.
+
+Links:
+
+- https://eurkey.steffen.bruentjen.eu/

keyboards/crkbd/keymaps/hvp/rules.mk

@@ -0,0 +1,14 @@
+
+# If you want to change the display of OLED, you need to change here
+SRC +=  ./lib/glcdfont.c \
+        ./lib/rgb_state_reader.c \
+        ./lib/layer_state_reader.c \
+        ./lib/logo_reader.c \
+        ./lib/keylogger.c \
+        # ./lib/mode_icon_reader.c \
+        # ./lib/host_led_state_reader.c \
+        # ./lib/timelogger.c \
+
+TAP_DANCE_ENABLE = yes
+EXTRAKEY_ENABLE = yes        # Audio control and System control(+450)
+# LOCAL_GLCDFONT = yes

keyboards/crkbd/keymaps/soundmonster/README.md

@@ -0,0 +1,13 @@
+# Soundmonster's layout for Corne
+
+Features:
+
+* Modern OLED support (many thanks to @drashna):
+  * Proper orientation
+  * Graphic layer indicator ↑ ↓
+  * Graphic modifier indicator ⌘ ⇧ ⌥  ⌃
+* Similar enough to the default keymap so you can easily port your custom keymap to it
+* Mac-friendly (Command and Option on the thumbs)
+* Vim-friendly (Esc, `:` and Ctrl on the thumbs)
+* Full per-key RGB Matrix support out of the box (you still have to go through the nightmare of soldering yourself though 😉)
+

keyboards/crkbd/keymaps/soundmonster/config.h

@@ -0,0 +1,110 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+// #define SSD1306OLED
+#undef USE_I2C
+#undef SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+// #define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 150
+#define RETRO_TAPPING
+#define IGNORE_MOD_TAP_INTERRUPT
+
+#ifdef RGBLIGHT_ENABLE
+    #undef RGBLED_NUM
+    #define RGBLED_NUM 27
+    #define RGBLIGHT_ANIMATIONS
+    #define RGBLIGHT_SLEEP
+    #define RGBLIGHT_SPLIT
+    #define RGBLIGHT_LIMIT_VAL 120
+    #define RGBLIGHT_HUE_STEP 10
+    #define RGBLIGHT_SAT_STEP 17
+    #define RGBLIGHT_VAL_STEP 17
+#endif
+
+#define OLED_FONT_H "keyboards/crkbd/keymaps/soundmonster/glcdfont.c"
+// #define OLED_FONT_WIDTH 5
+// #define OLED_FONT_HEIGHT 7
+
+#ifdef RGB_MATRIX_ENABLE
+#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+#   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. 
+#   define RGB_MATRIX_HUE_STEP 8
+#   define RGB_MATRIX_SAT_STEP 8
+#   define RGB_MATRIX_VAL_STEP 8
+#   define RGB_MATRIX_SPD_STEP 10
+
+/* Disable the animations you don't want/need.  You will need to disable a good number of these    *
+ * because they take up a lot of space.  Disable until you can successfully compile your firmware. */
+// #   define DISABLE_RGB_MATRIX_ALPHAS_MODS
+#   define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#   define DISABLE_RGB_MATRIX_BREATHING
+// #   define DISABLE_RGB_MATRIX_BAND_SAT
+#   define DISABLE_RGB_MATRIX_BAND_VAL
+#   define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#   define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#   define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#   define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#   define DISABLE_RGB_MATRIX_CYCLE_ALL
+#   define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#   define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#   define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
+#   define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+// #   define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#   define DISABLE_RGB_MATRIX_DUAL_BEACON
+#   define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#   define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
+#   define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+#   define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+// #   define DISABLE_RGB_MATRIX_RAINDROPS
+#   define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+// #   define DISABLE_RGB_MATRIX_TYPING_HEATMAP
+// #   define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#   define DISABLE_RGB_MATRIX_SPLASH
+// #   define DISABLE_RGB_MATRIX_MULTISPLASH
+#   define DISABLE_RGB_MATRIX_SOLID_SPLASH
+#   define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#endif

keyboards/crkbd/keymaps/soundmonster/glcdfont.c

@@ -0,0 +1,241 @@
+#pragma once
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#elif defined(ESP8266)
+ #include <pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+// Corne 8x6 font with QMK Firmware Logo
+// Online editor: https://helixfonteditor.netlify.com/
+// See also: https://github.com/soundmonster/glcdfont_converter
+
+const unsigned char font[] PROGMEM = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xC0, 0xE0, 0xF0, 0xF8,
+0xF8, 0x18, 0x00, 0xC0, 0xF0, 0xFC,
+0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0x7E, 0x00, 0x00, 0x00,
+0x00, 0xF8, 0x04, 0x22, 0x52, 0xE2,
+0x42, 0x42, 0x42, 0xE2, 0x52, 0x22,
+0x22, 0x22, 0x42, 0x82, 0x02, 0x02,
+0x22, 0x22, 0x02, 0x04, 0xF8, 0x00,
+0x00, 0xF8, 0x04, 0x02, 0x02, 0x82,
+0x42, 0x22, 0x42, 0x82, 0x02, 0x02,
+0x02, 0x82, 0x42, 0x22, 0x12, 0x22,
+0x42, 0x82, 0x02, 0x04, 0xF8, 0x00,
+0x00, 0xF8, 0xFC, 0xDE, 0xAE, 0x1E,
+0xBE, 0xBE, 0xBE, 0x1E, 0xAE, 0xDE,
+0xDE, 0xDE, 0xBE, 0x7E, 0xFE, 0xFE,
+0xDE, 0xDE, 0xFE, 0xFC, 0xF8, 0x00,
+0x00, 0xF8, 0xFC, 0xFE, 0xFE, 0x7E,
+0xBE, 0xDE, 0xBE, 0x7E, 0xFE, 0xFE,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x80, 0x80, 0x40, 0x40, 0x20, 0x20,
+0x10, 0x10, 0x08, 0x08, 0x10, 0x10,
+0x20, 0x20, 0x40, 0x40, 0x80, 0x80,
+0x80, 0x80, 0xC0, 0xC0, 0xE0, 0xE0,
+0xF0, 0xF0, 0xF8, 0xF8, 0xF0, 0xF0,
+0xE0, 0xE0, 0xC0, 0xC0, 0x80, 0x80,
+0x80, 0x80, 0x40, 0x40, 0x20, 0x20,
+0x10, 0x10, 0x08, 0x08, 0x10, 0x10,
+0x20, 0x20, 0x40, 0x40, 0x80, 0x80,
+0x80, 0x80, 0x40, 0xC0, 0x60, 0xA0,
+0x50, 0xB0, 0x58, 0xA8, 0x50, 0xB0,
+0x60, 0xA0, 0x40, 0xC0, 0x80, 0x80,
+0x00, 0xF8, 0xFC, 0xFE, 0xFF, 0xE0,
+0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0x80, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F,
+0x07, 0x01, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x1F, 0x20, 0x44, 0x4A, 0x47,
+0x42, 0x42, 0x42, 0x47, 0x4A, 0x44,
+0x40, 0x40, 0x40, 0x40, 0x41, 0x42,
+0x44, 0x44, 0x40, 0x20, 0x1F, 0x00,
+0x00, 0x1F, 0x20, 0x40, 0x41, 0x40,
+0x40, 0x40, 0x40, 0x40, 0x41, 0x40,
+0x41, 0x41, 0x4F, 0x48, 0x48, 0x48,
+0x4F, 0x41, 0x41, 0x20, 0x1F, 0x00,
+0x00, 0x1F, 0x3F, 0x7B, 0x75, 0x78,
+0x7D, 0x7D, 0x7D, 0x78, 0x75, 0x7B,
+0x7F, 0x7F, 0x7F, 0x7F, 0x7E, 0x7D,
+0x7B, 0x7B, 0x7F, 0x3F, 0x1F, 0x00,
+0x00, 0x1F, 0x3F, 0x7F, 0x7E, 0x7F,
+0x7F, 0x7F, 0x7F, 0x7F, 0x7E, 0x7F,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x88, 0x88, 0x5D, 0x5D, 0x3E, 0x3E,
+0x7C, 0x7C, 0xF8, 0xF8, 0x7C, 0x7C,
+0x3E, 0x3E, 0x5D, 0x5D, 0x88, 0x88,
+0x88, 0x88, 0x55, 0x55, 0x23, 0x23,
+0x47, 0x47, 0x8F, 0x8F, 0x47, 0x47,
+0x23, 0x23, 0x55, 0x55, 0x88, 0x88,
+0x88, 0x88, 0xD5, 0xD5, 0xE2, 0xE2,
+0xC4, 0xC4, 0x88, 0x88, 0xC4, 0xC4,
+0xE2, 0xE2, 0xD5, 0xD5, 0x88, 0x88,
+0x88, 0x88, 0x5D, 0xD5, 0x6B, 0xB6,
+0x6D, 0xD6, 0xAD, 0xDA, 0x6D, 0xD6,
+0x6B, 0xB6, 0x5D, 0xD5, 0x88, 0x88,
+0x00, 0x03, 0x0F, 0x1F, 0x3F, 0x3F,
+0x3F, 0x3F, 0x1F, 0x1F, 0x3F, 0x3F,
+0x7F, 0x7F, 0x7F, 0x3F, 0x3F, 0x1F,
+0x3F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7C,
+0x78, 0x78, 0x38, 0x1C, 0x0F, 0x00,
+0x04, 0xF8, 0x00, 0x00, 0xF8, 0x04,
+0x20, 0x1F, 0x00, 0x00, 0x1F, 0x20,
+0xFC, 0xF8, 0x00, 0x00, 0xF8, 0x04,
+0x3F, 0x1F, 0x00, 0x00, 0x1F, 0x20,
+0x04, 0xF8, 0x00, 0x00, 0xF8, 0xFC,
+0x20, 0x1F, 0x00, 0x00, 0x1F, 0x3F,
+0xFC, 0xF8, 0x00, 0x00, 0xF8, 0xFC,
+0x3F, 0x1F, 0x00, 0x00, 0x1F, 0x3F,
+0xFE, 0x7E, 0xBE, 0xDE, 0xEE, 0xDE,
+0xBE, 0x7E, 0xFE, 0xFC, 0xF8, 0x00,
+0x7E, 0x7E, 0x70, 0x77, 0x77, 0x77,
+0x70, 0x7E, 0x7E, 0x3F, 0x1F, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x02, 0x02,
+0x04, 0x04, 0x08, 0x08, 0x04, 0x04,
+0x02, 0x02, 0x01, 0x01, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x02, 0x02,
+0x04, 0x04, 0x08, 0x08, 0x04, 0x04,
+0x02, 0x02, 0x01, 0x01, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x03, 0x03,
+0x07, 0x07, 0x0F, 0x0F, 0x07, 0x07,
+0x03, 0x03, 0x01, 0x01, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x03, 0x02,
+0x05, 0x06, 0x0D, 0x0A, 0x05, 0x06,
+0x03, 0x02, 0x01, 0x01, 0x00, 0x00
+};

keyboards/crkbd/keymaps/soundmonster/keymap.c

@@ -0,0 +1,393 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+#ifdef OLED_DRIVER_ENABLE
+static uint32_t oled_timer = 0;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+// Custom keycodes for layer keys
+// Dual function escape with left command
+#define KC_LGESC LGUI_T(KC_ESC)
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+  RGBRST,
+  KC_RACL // right alt / colon
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT(
+  //,-----------------------------------------.                ,---------------------------------------------.
+     KC_TAB,  KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,                   KC_Y,  KC_U,  KC_I,  KC_O,  KC_P,  KC_BSPC,
+  //|------+------+------+------+------+------|                |------+------+-------+------+-------+--------|
+    KC_LCTL,  KC_A,  KC_S,  KC_D,  KC_F,  KC_G,                   KC_H,  KC_J,  KC_K,  KC_L, KC_SCLN,KC_QUOT,
+  //|------+------+------+------+------+------|                |------+------+-------+------+-------+--------|
+    KC_LSPO,  KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,                   KC_N,  KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSPC,
+  //|------+------+------+------+------+------+------|  |------+------+------+-------+------+-------+--------|
+                               KC_LGESC,LOWER, KC_SPC,   RCTL_T(KC_ENT), RAISE, KC_RACL
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_LOWER] = LAYOUT(
+  //,---------------------------------------------.                ,-----------------------------------------.
+     KC_ESC,  KC_1, KC_2,   KC_3,   KC_4,   KC_5,                    KC_6,  KC_7,  KC_8,  KC_9,  KC_0, KC_DEL,
+  //|------+------+-------+-------+-------+-------|                |------+------+------+------+------+------|
+    KC_LCTL, KC_NO,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,                KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,KC_NO,KC_NO,
+  //|------+------+-------+-------+-------+-------|                |------+------+------+------+------+------|
+    KC_LSFT, KC_NO,KC_BTN2,KC_WH_D,KC_WH_U,KC_BTN1,                KC_HOME,KC_PGDN,KC_PGUP,KC_END,KC_NO,KC_NO,
+  //|------+------+-------+-------+-------+-------+------|  |------+------+------+------+------+------+------|
+                                    KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT
+                                  //`--------------------'  `--------------------'
+  ),
+
+  [_RAISE] = LAYOUT(
+  //,-----------------------------------------.                ,-----------------------------------------.
+     KC_ESC,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC,              KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_LCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,                KC_MINS,KC_EQL,KC_LCBR,KC_RCBR,KC_PIPE,KC_GRV,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_LSFT, KC_F6, KC_F7, KC_F8, KC_F9,KC_F10,                KC_UNDS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS,KC_TILD,
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_ADJUST] = LAYOUT(
+  //,-----------------------------------------.                ,-----------------------------------------.
+      RESET,RGBRST, KC_NO, KC_NO, KC_NO, KC_NO,                  KC_NO,KC__MUTE, KC_NO, KC_NO, KC_NO, KC_NO,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    RGB_TOG,RGB_HUI,RGB_SAI,RGB_VAI,RGB_SPI,KC_NO,               KC_PAUSE,KC__VOLUP, KC_NO, KC_NO, KC_NO, KC_NO,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    RGB_MOD,RGB_HUD,RGB_SAD,RGB_VAD,RGB_SPD,KC_NO,               KC_SCROLLLOCK,KC__VOLDOWN, KC_NO, KC_NO, KC_NO, RGB_RMOD,
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT
+                              //`--------------------'  `--------------------'
+  )
+};
+
+int RGB_current_mode;
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+void matrix_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+}
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; }
+
+void render_space(void) {
+    oled_write_P(PSTR("     "), false);
+}
+
+void render_mod_status_gui_alt(uint8_t modifiers) {
+    static const char PROGMEM gui_off_1[] = {0x85, 0x86, 0};
+    static const char PROGMEM gui_off_2[] = {0xa5, 0xa6, 0};
+    static const char PROGMEM gui_on_1[] = {0x8d, 0x8e, 0};
+    static const char PROGMEM gui_on_2[] = {0xad, 0xae, 0};
+
+    static const char PROGMEM alt_off_1[] = {0x87, 0x88, 0};
+    static const char PROGMEM alt_off_2[] = {0xa7, 0xa8, 0};
+    static const char PROGMEM alt_on_1[] = {0x8f, 0x90, 0};
+    static const char PROGMEM alt_on_2[] = {0xaf, 0xb0, 0};
+
+    // fillers between the modifier icons bleed into the icon frames
+    static const char PROGMEM off_off_1[] = {0xc5, 0};
+    static const char PROGMEM off_off_2[] = {0xc6, 0};
+    static const char PROGMEM on_off_1[] = {0xc7, 0};
+    static const char PROGMEM on_off_2[] = {0xc8, 0};
+    static const char PROGMEM off_on_1[] = {0xc9, 0};
+    static const char PROGMEM off_on_2[] = {0xca, 0};
+    static const char PROGMEM on_on_1[] = {0xcb, 0};
+    static const char PROGMEM on_on_2[] = {0xcc, 0};
+
+    if(modifiers & MOD_MASK_GUI) {
+        oled_write_P(gui_on_1, false);
+    } else {
+        oled_write_P(gui_off_1, false);
+    }
+
+    if ((modifiers & MOD_MASK_GUI) && (modifiers & MOD_MASK_ALT)) {
+        oled_write_P(on_on_1, false);
+    } else if(modifiers & MOD_MASK_GUI) {
+        oled_write_P(on_off_1, false);
+    } else if(modifiers & MOD_MASK_ALT) {
+        oled_write_P(off_on_1, false);
+    } else {
+        oled_write_P(off_off_1, false);
+    }
+
+    if(modifiers & MOD_MASK_ALT) {
+        oled_write_P(alt_on_1, false);
+    } else {
+        oled_write_P(alt_off_1, false);
+    }
+
+    if(modifiers & MOD_MASK_GUI) {
+        oled_write_P(gui_on_2, false);
+    } else {
+        oled_write_P(gui_off_2, false);
+    }
+
+    if (modifiers & MOD_MASK_GUI & MOD_MASK_ALT) {
+        oled_write_P(on_on_2, false);
+    } else if(modifiers & MOD_MASK_GUI) {
+        oled_write_P(on_off_2, false);
+    } else if(modifiers & MOD_MASK_ALT) {
+        oled_write_P(off_on_2, false);
+    } else {
+        oled_write_P(off_off_2, false);
+    }
+
+    if(modifiers & MOD_MASK_ALT) {
+        oled_write_P(alt_on_2, false);
+    } else {
+        oled_write_P(alt_off_2, false);
+    }
+}
+
+void render_mod_status_ctrl_shift(uint8_t modifiers) {
+    static const char PROGMEM ctrl_off_1[] = {0x89, 0x8a, 0};
+    static const char PROGMEM ctrl_off_2[] = {0xa9, 0xaa, 0};
+    static const char PROGMEM ctrl_on_1[] = {0x91, 0x92, 0};
+    static const char PROGMEM ctrl_on_2[] = {0xb1, 0xb2, 0};
+
+    static const char PROGMEM shift_off_1[] = {0x8b, 0x8c, 0};
+    static const char PROGMEM shift_off_2[] = {0xab, 0xac, 0};
+    static const char PROGMEM shift_on_1[] = {0xcd, 0xce, 0};
+    static const char PROGMEM shift_on_2[] = {0xcf, 0xd0, 0};
+
+    // fillers between the modifier icons bleed into the icon frames
+    static const char PROGMEM off_off_1[] = {0xc5, 0};
+    static const char PROGMEM off_off_2[] = {0xc6, 0};
+    static const char PROGMEM on_off_1[] = {0xc7, 0};
+    static const char PROGMEM on_off_2[] = {0xc8, 0};
+    static const char PROGMEM off_on_1[] = {0xc9, 0};
+    static const char PROGMEM off_on_2[] = {0xca, 0};
+    static const char PROGMEM on_on_1[] = {0xcb, 0};
+    static const char PROGMEM on_on_2[] = {0xcc, 0};
+
+    if(modifiers & MOD_MASK_CTRL) {
+        oled_write_P(ctrl_on_1, false);
+    } else {
+        oled_write_P(ctrl_off_1, false);
+    }
+
+    if ((modifiers & MOD_MASK_CTRL) && (modifiers & MOD_MASK_SHIFT)) {
+        oled_write_P(on_on_1, false);
+    } else if(modifiers & MOD_MASK_CTRL) {
+        oled_write_P(on_off_1, false);
+    } else if(modifiers & MOD_MASK_SHIFT) {
+        oled_write_P(off_on_1, false);
+    } else {
+        oled_write_P(off_off_1, false);
+    }
+
+    if(modifiers & MOD_MASK_SHIFT) {
+        oled_write_P(shift_on_1, false);
+    } else {
+        oled_write_P(shift_off_1, false);
+    }
+
+    if(modifiers & MOD_MASK_CTRL) {
+        oled_write_P(ctrl_on_2, false);
+    } else {
+        oled_write_P(ctrl_off_2, false);
+    }
+
+    if (modifiers & MOD_MASK_CTRL & MOD_MASK_SHIFT) {
+        oled_write_P(on_on_2, false);
+    } else if(modifiers & MOD_MASK_CTRL) {
+        oled_write_P(on_off_2, false);
+    } else if(modifiers & MOD_MASK_SHIFT) {
+        oled_write_P(off_on_2, false);
+    } else {
+        oled_write_P(off_off_2, false);
+    }
+
+    if(modifiers & MOD_MASK_SHIFT) {
+        oled_write_P(shift_on_2, false);
+    } else {
+        oled_write_P(shift_off_2, false);
+    }
+}
+
+void render_logo(void) {
+    static const char PROGMEM corne_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0};
+    oled_write_P(corne_logo, false);
+    oled_write_P(PSTR("corne"), false);
+}
+
+void render_layer_state(void) {
+    static const char PROGMEM default_layer[] = {
+        0x20, 0x94, 0x95, 0x96, 0x20,
+        0x20, 0xb4, 0xb5, 0xb6, 0x20,
+        0x20, 0xd4, 0xd5, 0xd6, 0x20, 0};
+    static const char PROGMEM raise_layer[] = {
+        0x20, 0x97, 0x98, 0x99, 0x20,
+        0x20, 0xb7, 0xb8, 0xb9, 0x20,
+        0x20, 0xd7, 0xd8, 0xd9, 0x20, 0};
+    static const char PROGMEM lower_layer[] = {
+        0x20, 0x9a, 0x9b, 0x9c, 0x20,
+        0x20, 0xba, 0xbb, 0xbc, 0x20,
+        0x20, 0xda, 0xdb, 0xdc, 0x20, 0};
+    static const char PROGMEM adjust_layer[] = {
+        0x20, 0x9d, 0x9e, 0x9f, 0x20,
+        0x20, 0xbd, 0xbe, 0xbf, 0x20,
+        0x20, 0xdd, 0xde, 0xdf, 0x20, 0};
+    if(layer_state_is(_ADJUST)) {
+        oled_write_P(adjust_layer, false);
+    } else if(layer_state_is(_LOWER)) {
+        oled_write_P(lower_layer, false);
+    } else if(layer_state_is(_RAISE)) {
+        oled_write_P(raise_layer, false);
+    } else {
+        oled_write_P(default_layer, false);
+    }
+}
+
+void render_status_main(void) {
+    render_logo();
+    render_space();
+    render_layer_state();
+    render_space();
+    render_mod_status_gui_alt(get_mods()|get_oneshot_mods());
+    render_mod_status_ctrl_shift(get_mods()|get_oneshot_mods());
+}
+
+void render_status_secondary(void) {
+    render_logo();
+    render_space();
+    render_layer_state();
+    render_space();
+    render_mod_status_gui_alt(get_mods()|get_oneshot_mods());
+    render_mod_status_ctrl_shift(get_mods()|get_oneshot_mods());
+}
+
+void oled_task_user(void) {
+    if (timer_elapsed32(oled_timer) > 30000) {
+        oled_off();
+        return;
+    }
+#ifndef SPLIT_KEYBOARD
+    else { oled_on(); }
+#endif
+
+    if (is_master) {
+        render_status_main();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_status_secondary();
+    }
+}
+
+#endif
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+#ifdef OLED_DRIVER_ENABLE
+        oled_timer = timer_read32();
+#endif
+    // set_timelog();
+  }
+  static uint16_t my_colon_timer;
+
+  switch (keycode) {
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+    case KC_RACL:
+        if (record->event.pressed) {
+          my_colon_timer = timer_read();
+          register_code(KC_RALT);
+        } else {
+          unregister_code(KC_RALT);
+          if (timer_elapsed(my_colon_timer) < TAPPING_TERM) {
+            SEND_STRING(":"); // Change the character(s) to be sent on tap here
+          }
+        }
+        return false;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      #ifdef RGB_MATRIX_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgb_matrix_default();
+          rgb_matrix_enable();
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+#ifdef RGB_MATRIX_ENABLE
+
+void suspend_power_down_keymap(void) {
+    rgb_matrix_set_suspend_state(true);
+}
+
+void suspend_wakeup_init_keymap(void) {
+    rgb_matrix_set_suspend_state(false);
+}
+
+#endif

keyboards/crkbd/keymaps/soundmonster/rules.mk

@@ -0,0 +1,6 @@
+RGBLIGHT_ENABLE    = no
+RGB_MATRIX_ENABLE  = WS2812
+MOUSEKEY_ENABLE    = no
+NKRO_ENABLE        = yes
+OLED_DRIVER_ENABLE = yes
+

keyboards/crkbd/keymaps/tominabox1/keymap.c

@@ -0,0 +1,46 @@
+#include QMK_KEYBOARD_H
+#include "tominabox1.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_wrapper(
+    ___________________CRKBD1__________________,
+    ___________________CRKBD2__________________,
+    ___________________CRKBD3__________________,
+    ___________________CRKBD4__________________
+  ),
+
+  [_RAISE] = LAYOUT_wrapper(
+    ___________________RAISE1__________________,
+    ___________________RAISE2__________________,
+    ___________________CRKBD_RAISE3____________,
+    ___________________CRKBD_RAISE4____________
+  ),
+
+  [_LOWER] = LAYOUT_wrapper(
+    _________________LOWER_1___________________,
+    _________________LOWER_2___________________,
+    ___________________CRKBD_LOW3______________,
+    ___________________CRKBD_LOW4______________
+  ),
+
+  [_ADJUST] = LAYOUT_wrapper(
+    ___________________ADJST1__________________,
+    ___________________CRKBD_ADJST2____________,
+    ___________________CRKBD_ADJST3____________,
+    ___________________CRKBD_ADJST4____________
+  ),
+
+  [_ARROW] = LAYOUT_wrapper(
+    ___________________ARROW1__________________,
+    ___________________ARROW2__________________,
+    ___________________ARROW3__________________,
+    ___________________ARROW4__________________
+   ),
+   [_FKEY] = LAYOUT_wrapper(
+    ___________________FKEY1___________________,
+    ___________________FKEY2___________________,
+    ___________________CRKBD_FKEY3_____________,
+    ___________________CRKBD_FKEY4_____________
+  )
+
+};

keyboards/duck/orion/v3/rules.mk

@@ -11,7 +11,6 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
 # Build Options
 #   change yes to no to disable
 #
@@ -36,4 +35,4 @@ CUSTOM_MATRIX = yes
 SRC += indicator_leds.c \
 			 matrix.c duck_led/duck_led.c
 
-LAYOUTS = tkl_ansi
+LAYOUTS = tkl_ansi

keyboards/dz60/keymaps/pok3r/keymap.c

@@ -0,0 +1,25 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT(
+		KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_NO, MO(2), KC_RCTL),
+
+	LAYOUT(
+		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL,
+		_______, KC_MPRV, KC_MPLY, KC_MNXT, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, _______,
+		KC_CAPS, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_DEL, _______,
+		_______, KC_APP, _______, _______, _______, _______, KC_END, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+
+	LAYOUT(
+		RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, _______, RGB_RMOD, RGB_MOD, _______, _______,
+		_______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+};

keyboards/dztech/dz65rgb/dz65rgb.c

@@ -114,3 +114,12 @@ void suspend_wakeup_init_kb(void)
     rgb_matrix_set_suspend_state(false);
     suspend_wakeup_init_user();
 }
+
+__attribute__ ((weak))
+void rgb_matrix_indicators_user(void)
+{
+    if (IS_LED_ON(host_keyboard_leds(), USB_LED_CAPS_LOCK))
+    {
+        rgb_matrix_set_color(8, 0xFF, 0xFF, 0xFF);
+    }
+}

keyboards/dztech/dz65rgb/keymaps/default/keymap.c

@@ -16,14 +16,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		    KC_TRNS,       KC_TRNS,  KC_TRNS,                  KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,  KC_MPRV,          KC_VOLD,  KC_MNXT),
 };
 
-void rgb_matrix_indicators_user(void)
-{
-	    if (IS_LED_ON(host_keyboard_leds(), USB_LED_CAPS_LOCK))
-	    {
-	      rgb_matrix_set_color(8, 0xFF, 0xFF, 0xFF);
-	    }
-}
-
 void matrix_init_user(void)
 {
   //user initialization

keyboards/ergodone/matrix.c

@@ -9,9 +9,6 @@
 #include "matrix.h"
 #include "ergodone.h"
 #include "expander.h"
-#ifdef DEBUG_MATRIX_SCAN_RATE
-#include  "timer.h"
-#endif
 
 /*
  * This constant define not debouncing time in msecs, but amount of matrix
@@ -41,12 +38,6 @@ static void init_cols(void);
 static void unselect_rows(void);
 static void select_row(uint8_t row);
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-uint32_t matrix_timer;
-uint32_t matrix_scan_count;
-#endif
-
-
 __attribute__ ((weak))
 void matrix_init_user(void) {}
 
@@ -88,13 +79,7 @@ void matrix_init(void)
     }
   }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-  matrix_timer = timer_read32();
-  matrix_scan_count = 0;
-#endif
-
   matrix_init_quantum();
-
 }
 
 void matrix_power_up(void) {
@@ -105,11 +90,6 @@ void matrix_power_up(void) {
   for (uint8_t i=0; i < MATRIX_ROWS; i++) {
     matrix[i] = 0;
   }
-
-#ifdef DEBUG_MATRIX_SCAN_RATE
-  matrix_timer = timer_read32();
-  matrix_scan_count = 0;
-#endif
 }
 
 // Returns a matrix_row_t whose bits are set if the corresponding key should be
@@ -140,21 +120,6 @@ uint8_t matrix_scan(void)
 {
   expander_scan();
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-  matrix_scan_count++;
-
-  uint32_t timer_now = timer_read32();
-  if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
-    print("matrix scan frequency: ");
-    pdec(matrix_scan_count);
-    print("\n");
-    matrix_print();
-
-    matrix_timer = timer_now;
-    matrix_scan_count = 0;
-  }
-#endif
-
   for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
     select_row(i);
     wait_us(30);  // without this wait read unstable value.

keyboards/ergodox_ez/matrix.c

@@ -32,15 +32,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "debounce.h"
 #include QMK_KEYBOARD_H
 
-// Only enable this if console is enabled to print to
-#if defined(DEBUG_MATRIX_SCAN_RATE) && !defined(CONSOLE_ENABLE)
-#    undef DEBUG_MATRIX_SCAN_RATE
-#endif
-
-#ifdef DEBUG_MATRIX_SCAN_RATE
-#  include "timer.h"
-#endif
-
 /*
  * This constant define not debouncing time in msecs, assuming eager_pr.
  *
@@ -65,11 +56,6 @@ static void         select_row(uint8_t row);
 static uint8_t mcp23018_reset_loop;
 // static uint16_t mcp23018_reset_loop;
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-uint32_t matrix_timer;
-uint32_t matrix_scan_count;
-#endif
-
 __attribute__((weak)) void matrix_init_user(void) {}
 
 __attribute__((weak)) void matrix_scan_user(void) {}
@@ -96,10 +82,6 @@ void matrix_init(void) {
     raw_matrix[i] = 0;
   }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-  matrix_timer      = timer_read32();
-  matrix_scan_count = 0;
-#endif
   debounce_init(MATRIX_ROWS);
   matrix_init_quantum();
 }
@@ -114,11 +96,6 @@ void matrix_power_up(void) {
   for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
     matrix[i] = 0;
   }
-
-#ifdef DEBUG_MATRIX_SCAN_RATE
-  matrix_timer      = timer_read32();
-  matrix_scan_count = 0;
-#endif
 }
 
 // Reads and stores a row, returning
@@ -149,20 +126,6 @@ uint8_t matrix_scan(void) {
     }
   }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-  matrix_scan_count++;
-
-  uint32_t timer_now = timer_read32();
-  if (TIMER_DIFF_32(timer_now, matrix_timer) > 1000) {
-    print("matrix scan frequency: ");
-    pdec(matrix_scan_count);
-    print("\n");
-
-    matrix_timer      = timer_now;
-    matrix_scan_count = 0;
-  }
-#endif
-
 #ifdef LEFT_LEDS
   mcp23018_status = ergodox_left_leds_update();
 #endif  // LEFT_LEDS

keyboards/ergodox_stm32/config.h

@@ -33,3 +33,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
     keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
 )
+
+// i2c_master driver config
+#define I2C1_CLOCK_SPEED 400000
+#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2

keyboards/ergodox_stm32/matrix.c

@@ -13,13 +13,6 @@
 #define DEBOUNCE 10
 #endif
 
-//#define DEBUG_MATRIX_SCAN_RATE
-
-//#ifdef DEBUG_MATRIX_SCAN_RATE
-//uint32_t matrix_timer;
-//uint32_t matrix_scan_count;
-//#endif
-
 static uint8_t mcp23017_reset_loop = 0;
 
 volatile matrix_row_t matrix[MATRIX_ROWS];

keyboards/ergotaco/matrix.c

@@ -26,9 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "debug.h"
 #include "util.h"
 #include QMK_KEYBOARD_H
-#ifdef DEBUG_MATRIX_SCAN_RATE
-#include  "timer.h"
-#endif
 
 #ifndef DEBOUNCE
 #   define DEBOUNCE	5
@@ -70,12 +67,6 @@ static void select_row(uint8_t row);
 static uint8_t mcp23018_reset_loop;
 // static uint16_t mcp23018_reset_loop;
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-uint32_t matrix_timer;
-uint32_t matrix_scan_count;
-#endif
-
-
 __attribute__ ((weak))
 void matrix_init_user(void) {}
 
@@ -121,10 +112,6 @@ void matrix_init(void)
         }
     }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer = timer_read32();
-    matrix_scan_count = 0;
-#endif
     matrix_init_quantum();
 }
 
@@ -138,12 +125,6 @@ void matrix_power_up(void) {
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
         matrix[i] = 0;
     }
-
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer = timer_read32();
-    matrix_scan_count = 0;
-#endif
-
 }
 
 // Returns a matrix_row_t whose bits are set if the corresponding key should be
@@ -192,18 +173,6 @@ uint8_t matrix_scan(void)
       }
   }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_scan_count++;
-    uint32_t timer_now = timer_read32();
-    if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
-        print("matrix scan frequency: ");
-        pdec(matrix_scan_count);
-        print("\n");
-
-        matrix_timer = timer_now;
-        matrix_scan_count = 0;
-    }
-#endif
     for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
         select_row(i);
         // and select on left hand

keyboards/fc660c/rules.mk

@@ -11,7 +11,6 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/geekboards/tester/rules.mk

@@ -1,52 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# project specific files
-#SRC =
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = qmk-dfu
 
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/georgi/matrix.c

@@ -27,10 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "keymap_steno.h"
 #include QMK_KEYBOARD_H
-#ifdef DEBUG_MATRIX_SCAN_RATE
-#include  "timer.h"
-#endif
-
 
 #ifndef DEBOUNCE
 #   define DEBOUNCE	5
@@ -92,12 +88,6 @@ static void select_row(uint8_t row);
 static uint8_t mcp23018_reset_loop;
 // static uint16_t mcp23018_reset_loop;
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-uint32_t matrix_timer;
-uint32_t matrix_scan_count;
-#endif
-
-
 __attribute__ ((weak))
 void matrix_init_user(void) {}
 
@@ -143,10 +133,6 @@ void matrix_init(void)
         }
     }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer = timer_read32();
-    matrix_scan_count = 0;
-#endif
     matrix_init_quantum();
 }
 
@@ -160,12 +146,6 @@ void matrix_power_up(void) {
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
         matrix[i] = 0;
     }
-
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer = timer_read32();
-    matrix_scan_count = 0;
-#endif
-
 }
 
 // Returns a matrix_row_t whose bits are set if the corresponding key should be
@@ -214,18 +194,6 @@ uint8_t matrix_scan(void)
       }
   }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_scan_count++;
-    uint32_t timer_now = timer_read32();
-    if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
-        print("matrix scan frequency: ");
-        pdec(matrix_scan_count);
-        print("\n");
-
-        matrix_timer = timer_now;
-        matrix_scan_count = 0;
-    }
-#endif
     for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
         select_row(i);
         // and select on left hand

keyboards/georgi/rules.mk

@@ -1,18 +1,15 @@
-#----------------------------------------------------------------------------
-# make georgi:default:dfu
-# Make sure you have dfu-programmer installed!
-# Do not edit this file! Make a copy of keymaps/default and modify that!
-#----------------------------------------------------------------------------
-# Source includes
-SRC += matrix.c i2c_master.c sten.c
-
-# Hardware info
+# MCU name
 MCU = atmega32u4
-F_CPU = 16000000
-ARCH = AVR8
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
-F_USB = $(F_CPU)
-EXTRAFLAGS += -flto
 
 CUSTOM_MATRIX 		= yes
 MOUSEKEY_ENABLE		= no
@@ -21,3 +18,6 @@ EXTRAKEY_ENABLE     = yes
 CONSOLE_ENABLE      = yes
 COMMAND_ENABLE      = no
 NKRO_ENABLE			= yes
+
+EXTRAFLAGS += -flto
+SRC += matrix.c i2c_master.c sten.c

keyboards/gergo/matrix.c

@@ -27,9 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "debounce.h"
 #include QMK_KEYBOARD_H
-#ifdef DEBUG_MATRIX_SCAN_RATE
-#   include  "timer.h"
-#endif
 
 #ifdef BALLER
 #include <avr/interrupt.h>
@@ -124,12 +121,6 @@ static void enableInterrupts(void);
 static uint8_t mcp23018_reset_loop;
 // static uint16_t mcp23018_reset_loop;
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-uint32_t matrix_timer;
-uint32_t matrix_scan_count;
-#endif
-
-
 __attribute__ ((weak)) void matrix_init_user(void) {}
 
 __attribute__ ((weak)) void matrix_scan_user(void) {}
@@ -161,10 +152,6 @@ void matrix_init(void) {
     raw_matrix[i] = 0;
   }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer      = timer_read32();
-    matrix_scan_count = 0;
-#endif
     debounce_init(MATRIX_ROWS);
     matrix_init_quantum();
 }
@@ -179,12 +166,6 @@ void matrix_power_up(void) {
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
         matrix[i] = 0;
     }
-
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer      = timer_read32();
-    matrix_scan_count = 0;
-#endif
-
 }
 
 // Reads and stores a row, returning
@@ -261,20 +242,6 @@ uint8_t matrix_scan(void) {
         }
     }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_scan_count++;
-
-    uint32_t timer_now = timer_read32();
-    if (TIMER_DIFF_32(timer_now, matrix_timer) > 1000) {
-        print("matrix scan frequency: ");
-        pdec(matrix_scan_count);
-        print("\n");
-
-        matrix_timer      = timer_now;
-        matrix_scan_count = 0;
-    }
-#endif
-
     bool changed = false;
     for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
         // select rows from left and right hands

keyboards/gergo/rules.mk

@@ -1,18 +1,15 @@
-#----------------------------------------------------------------------------
-# make gergo:germ:dfu
-# Make sure you have dfu-programmer installed!
-# Do not edit this file! Make a copy of keymaps/default and modify that!
-#----------------------------------------------------------------------------
-# Source includes
-SRC += matrix.c 
-QUANTUM_LIB_SRC += i2c_master.c
-
-# Hardware info
+# MCU name
 MCU = atmega32u4
-F_CPU = 16000000
-ARCH = AVR8
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
-F_USB = $(F_CPU)
 
 CUSTOM_MATRIX 		= yes
 EXTRAKEY_ENABLE		= yes
@@ -21,3 +18,5 @@ COMMAND_ENABLE		= yes
 BOOTMAGIC_ENABLE = lite
 
 DEBOUNCE_TYPE  = eager_pr
+SRC += matrix.c
+QUANTUM_LIB_SRC += i2c_master.c

keyboards/gh60/revc/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   comment out to disable the options.

keyboards/gh60/satan/rules.mk

@@ -1,48 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   comment out to disable the options.

keyboards/gh80_3000/rules.mk

@@ -1,45 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   comment out to disable the options.

keyboards/gonnerd/rules.mk

@@ -1,51 +1,18 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
+# Processor frequency
 F_CPU = 8000000
 
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable

keyboards/gray_studio/cod67/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = lufa-ms
 
 # Build Options
 #   change yes to no to disable

keyboards/gray_studio/space65/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #
@@ -79,4 +32,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
-LAYOUTS = 65_ansi_blocker
+LAYOUTS = 65_ansi_blocker

keyboards/grid600/press/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/gskt00/rules.mk

@@ -1,41 +1,14 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/handwired/dactyl/matrix.c

@@ -76,11 +76,6 @@ uint8_t expander_status;
 uint8_t expander_input_pin_mask;
 bool i2c_initialized = false;
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-uint32_t matrix_timer;
-uint32_t matrix_scan_count;
-#endif
-
 #define ROW_SHIFTER ((matrix_row_t)1)
 
 __attribute__ ((weak))
@@ -129,11 +124,6 @@ void matrix_init(void)
         matrix_debouncing[i] = 0;
     }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer = timer_read32();
-    matrix_scan_count = 0;
-#endif
-
     matrix_init_quantum();
 }
 
@@ -236,20 +226,6 @@ uint8_t matrix_scan(void)
         }
     }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_scan_count++;
-
-    uint32_t timer_now = timer_read32();
-    if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
-        print("matrix scan frequency: ");
-        pdec(matrix_scan_count);
-        print("\n");
-
-        matrix_timer = timer_now;
-        matrix_scan_count = 0;
-    }
-#endif
-
 #if (DIODE_DIRECTION == COL2ROW)
     for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
 #       if (DEBOUNCE > 0)

keyboards/handwired/frenchdev/matrix.c

@@ -35,9 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "frenchdev.h"
-#ifdef DEBUG_MATRIX_SCAN_RATE
-#include  "timer.h"
-#endif
 
 /*
  * This constant define not debouncing time in msecs, but amount of matrix
@@ -66,12 +63,6 @@ static void select_row(uint8_t row);
 
 static uint8_t mcp23018_reset_loop;
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-uint32_t matrix_timer;
-uint32_t matrix_scan_count;
-#endif
-
-
 __attribute__ ((weak))
 void matrix_init_user(void) {}
 
@@ -120,13 +111,7 @@ void matrix_init(void)
         matrix_debouncing[i] = 0;
     }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer = timer_read32();
-    matrix_scan_count = 0;
-#endif
-
     matrix_init_quantum();
-
 }
 
 void matrix_power_up(void) {
@@ -140,12 +125,6 @@ void matrix_power_up(void) {
         matrix[i] = 0;
         matrix_debouncing[i] = 0;
     }
-
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer = timer_read32();
-    matrix_scan_count = 0;
-#endif
-
 }
 
 uint8_t matrix_scan(void)
@@ -165,20 +144,6 @@ uint8_t matrix_scan(void)
         }
     }
 
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_scan_count++;
-
-    uint32_t timer_now = timer_read32();
-    if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
-        print("matrix scan frequency: ");
-        pdec(matrix_scan_count);
-        print("\n");
-
-        matrix_timer = timer_now;
-        matrix_scan_count = 0;
-    }
-#endif
-
     for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
         select_row(i);
         wait_us(30);  // without this wait read unstable value.

keyboards/handwired/hnah108/hnah108.h

@@ -40,14 +40,14 @@
 }
 
 #define LAYOUT_fullsize_iso( \
-    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,                          \
+    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,      k65, k66, k67, k68, \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k70, k71, k72,     k73, k74, k75,      k76, k77, k78, k69,  \
     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k80, k81,          k83, k84, k85,      k86, k87, k79, k6A, \
     k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k91, k93, k94,                         k96, k97, k88, \
     k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k90,      k92,          k95,           k98, k99, k89, k7A, \
     k50, k51, k52,                k53,                k54, k55, k56, k57,     k58, k59, k5A,      k9A,      k8A \
 ) LAYOUT_all( \
-    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,      KC_NO, KC_NO, KC_NO, KC_NO, \
+    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,      k65, k66, k67, k68, \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k70, k71, k72,     k73, k74, k75,      k76, k77, k78, k69,  \
     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k80, k81, KC_NO,   k83, k84, k85,      k86, k87, k79, k6A, \
     k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k91, k93, k94,                         k96, k97, k88, \
@@ -56,14 +56,14 @@
 )
 
 #define LAYOUT_fullsize_ansi( \
-    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,                          \
+    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,      k65, k66, k67, k68,  \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k70, k71, k72,     k73, k74, k75,      k76, k77, k78, k69,  \
     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k80, k81, k82,     k83, k84, k85,      k86, k87, k79, k6A, \
     k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k91,      k94,                         k96, k97, k88, \
     k40,      k42, k43, k44, k45, k46, k47, k48, k49, k4A, k90,      k92,          k95,           k98, k99, k89, k7A, \
     k50, k51, k52,                k53,                k54, k55, k56, k57,     k58, k59, k5A,      k9A,      k8A \
 ) LAYOUT_all( \
-    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,      KC_NO, KC_NO, KC_NO, KC_NO, \
+    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,      k65, k66, k67, k68, \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k70, k71, k72,     k73, k74, k75,      k76, k77, k78, k69,  \
     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k80, k81, k82,     k83, k84, k85,      k86, k87, k79, k6A, \
     k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k91,KC_NO,k94,                         k96, k97, k88, \

keyboards/handwired/hnah108/info.json

@@ -6,13 +6,13 @@
     "height": 6.25, 
     "layouts": {
         "LAYOUT_all": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"x":18.5, "y":0}, {"x":19.5, "y":0}, {"x":20.5, "y":0}, {"x":21.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Num Lock", "x":18.5, "y":1.25}, {"label":"/", "x":19.5, "y":1.25}, {"label":"*", "x":20.5, "y":1.25}, {"label":"-", "x":21.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"7", "x":18.5, "y":2.25}, {"label":"8", "x":19.5, "y":2.25}, {"label":"9", "x":20.5, "y":2.25}, {"label":"+", "x":21.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"@", "x":11.75, "y":3.25}, {"label":"~", "x":12.75, "y":3.25}, {"label":"4", "x":18.5, "y":3.25}, {"label":"5", "x":19.5, "y":3.25}, {"label":"6", "x":20.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"1", "x":18.5, "y":4.25}, {"label":"2", "x":19.5, "y":4.25}, {"label":"3", "x":20.5, "y":4.25}, {"label":"Enter", "x":21.5, "y":4.25, "h":2}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}, {"label":"0", "x":18.5, "y":5.25, "w":2}, {"label":".", "x":20.5, "y":5.25}]
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"x":18.5, "y":0}, {"x":19.5, "y":0}, {"x":20.5, "y":0}, {"x":21.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Num Lock", "x":18.5, "y":1.25}, {"label":"/", "x":19.5, "y":1.25}, {"label":"*", "x":20.5, "y":1.25}, {"label":"-", "x":21.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"7", "x":18.5, "y":2.25}, {"label":"8", "x":19.5, "y":2.25}, {"label":"9", "x":20.5, "y":2.25}, {"label":"+", "x":21.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"@", "x":11.75, "y":3.25}, {"label":"~", "x":12.75, "y":3.25}, {"label":"Enter", "x":13.75, "y":3.25, "w":1.25}, {"label":"4", "x":18.5, "y":3.25}, {"label":"5", "x":19.5, "y":3.25}, {"label":"6", "x":20.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"1", "x":18.5, "y":4.25}, {"label":"2", "x":19.5, "y":4.25}, {"label":"3", "x":20.5, "y":4.25}, {"label":"Enter", "x":21.5, "y":4.25, "h":2}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}, {"label":"0", "x":18.5, "y":5.25, "w":2}, {"label":".", "x":20.5, "y":5.25}]
         },
         "LAYOUT_fullsize_iso": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Num Lock", "x":18.5, "y":1.25}, {"label":"/", "x":19.5, "y":1.25}, {"label":"*", "x":20.5, "y":1.25}, {"label":"-", "x":21.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"7", "x":18.5, "y":2.25}, {"label":"8", "x":19.5, "y":2.25}, {"label":"9", "x":20.5, "y":2.25}, {"label":"+", "x":21.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"@", "x":11.75, "y":3.25}, {"label":"~", "x":12.75, "y":3.25}, {"label":"4", "x":18.5, "y":3.25}, {"label":"5", "x":19.5, "y":3.25}, {"label":"6", "x":20.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"1", "x":18.5, "y":4.25}, {"label":"2", "x":19.5, "y":4.25}, {"label":"3", "x":20.5, "y":4.25}, {"label":"Enter", "x":21.5, "y":4.25, "h":2}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}, {"label":"0", "x":18.5, "y":5.25, "w":2}, {"label":".", "x":20.5, "y":5.25}]
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"x":18.5, "y":0}, {"x":19.5, "y":0}, {"x":20.5, "y":0}, {"x":21.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Num Lock", "x":18.5, "y":1.25}, {"label":"/", "x":19.5, "y":1.25}, {"label":"*", "x":20.5, "y":1.25}, {"label":"-", "x":21.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"7", "x":18.5, "y":2.25}, {"label":"8", "x":19.5, "y":2.25}, {"label":"9", "x":20.5, "y":2.25}, {"label":"+", "x":21.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"@", "x":11.75, "y":3.25}, {"label":"~", "x":12.75, "y":3.25}, {"label":"4", "x":18.5, "y":3.25}, {"label":"5", "x":19.5, "y":3.25}, {"label":"6", "x":20.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"1", "x":18.5, "y":4.25}, {"label":"2", "x":19.5, "y":4.25}, {"label":"3", "x":20.5, "y":4.25}, {"label":"Enter", "x":21.5, "y":4.25, "h":2}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}, {"label":"0", "x":18.5, "y":5.25, "w":2}, {"label":".", "x":20.5, "y":5.25}]
         },
         "LAYOUT_fullsize_ansi": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Num Lock", "x":18.5, "y":1.25}, {"label":"/", "x":19.5, "y":1.25}, {"label":"*", "x":20.5, "y":1.25}, {"label":"-", "x":21.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"7", "x":18.5, "y":2.25}, {"label":"8", "x":19.5, "y":2.25}, {"label":"9", "x":20.5, "y":2.25}, {"label":"+", "x":21.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"@", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"4", "x":18.5, "y":3.25}, {"label":"5", "x":19.5, "y":3.25}, {"label":"6", "x":20.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"1", "x":18.5, "y":4.25}, {"label":"2", "x":19.5, "y":4.25}, {"label":"3", "x":20.5, "y":4.25}, {"label":"Enter", "x":21.5, "y":4.25, "h":2}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}, {"label":"0", "x":18.5, "y":5.25, "w":2}, {"label":".", "x":20.5, "y":5.25}]
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"x":18.5, "y":0}, {"x":19.5, "y":0}, {"x":20.5, "y":0}, {"x":21.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Num Lock", "x":18.5, "y":1.25}, {"label":"/", "x":19.5, "y":1.25}, {"label":"*", "x":20.5, "y":1.25}, {"label":"-", "x":21.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"7", "x":18.5, "y":2.25}, {"label":"8", "x":19.5, "y":2.25}, {"label":"9", "x":20.5, "y":2.25}, {"label":"+", "x":21.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"4", "x":18.5, "y":3.25}, {"label":"5", "x":19.5, "y":3.25}, {"label":"6", "x":20.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"1", "x":18.5, "y":4.25}, {"label":"2", "x":19.5, "y":4.25}, {"label":"3", "x":20.5, "y":4.25}, {"label":"Enter", "x":21.5, "y":4.25, "h":2}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}, {"label":"0", "x":18.5, "y":5.25, "w":2}, {"label":".", "x":20.5, "y":5.25}]
         }
     }
 }

keyboards/handwired/hnah108/keymaps/default/keymap.c

@@ -44,17 +44,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 void encoder_update_user(uint8_t index, bool clockwise) {
-  if (IS_LAYER_ON(_FN)) { /* First encoder */
+  if (index == 0) {
+    if (IS_LAYER_ON(_FN)) { 
     if (clockwise) {
-      rgb_matrix_step();
+            tap_code(KC_BRIU);
     } else {
-      rgb_matrix_step_reverse();	
+            tap_code(KC_BRID);
     }
   } else {
     if (clockwise) {
-      rgb_matrix_increase_speed();
+            tap_code(KC_VOLU);
+
     } else {
-      rgb_matrix_decrease_speed();
+            tap_code(KC_VOLD);
+      }
     }
   }
 }

keyboards/handwired/hnah108/rules.mk

@@ -27,7 +27,7 @@ BOOTLOADER = atmel-dfu
 #
 BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no        # Console for debug(+400)
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -44,6 +44,3 @@ FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 ENCODER_ENABLE = yes
 RGB_MATRIX_ENABLE = WS2812
-
-# Supported layouts
-LAYOUTS = fullsize_ansi fullsize_iso

keyboards/handwired/splittest/teensy_2/config.h

@@ -27,5 +27,5 @@
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 
-// required for teensy slave otherwise it "locks up" during startup
-#define NO_USB_STARTUP_CHECK
+// teensy has vbus detection issues - use usb detection instead
+#define SPLIT_USB_DETECT

keyboards/handwired/splittest/teensy_2/teensy_2.c

@@ -1,14 +0,0 @@
-#include QMK_KEYBOARD_H
-
-bool is_keyboard_master(void) {
-    // TODO: replace this override once USB host detection is implemented
-    // SPLIT_HAND_PIN Combined with MASTER_LEFT or MASTER_RIGHT, gives a crude
-    // way to force teensy to run as slave/master
-    setPinInput(SPLIT_HAND_PIN);
-
-#if defined(MASTER_RIGHT)
-    return !readPin(SPLIT_HAND_PIN);
-#else
-    return readPin(SPLIT_HAND_PIN);
-#endif
-}

keyboards/handwired/xealous/matrix.c

@@ -30,18 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "pro_micro.h"
 #include "config.h"
 #include "timer.h"
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    #include "matrix_scanrate.h"
-#endif
-
-void matrix_scan_user(void)
-{    
-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_check_scan_rate();
-    matrix_time_between_scans();
-#endif        
-    
-}
 
 // Copy this code to split_common/matrix.c,
 // and call it instead of the unoptimized col_reader. Scan-rate jumps from 1200->1920

keyboards/handwired/xealous/matrix_scanrate.c

@@ -1,39 +0,0 @@
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "timer.h"
-
-#ifdef CONSOLE_ENABLE
-static uint16_t matrix_scan_count = 0;
-static uint32_t matrix_timer = 0;
-void matrix_check_scan_rate(void) {    
-    matrix_scan_count++;
-    if (matrix_scan_count > 1000) {
-        uint32_t timer_now = timer_read32();
-        uint16_t ms_per_thousand = TIMER_DIFF_32(timer_now, matrix_timer);
-        uint16_t rate_per_second = 1000000UL / ms_per_thousand;
-        print("scan_rate: ");
-        pdec(rate_per_second);
-        print("\n");
-        matrix_timer = timer_now;
-        matrix_scan_count = 0;
-    }    
-}
-
-static uint32_t last_scan_time = 0;
-void matrix_time_between_scans(void) {    
-    if (timer_elapsed(last_scan_time) > 1)
-    {
-        print(">1ms elapsed since last scan: ");
-        pdec(timer_elapsed(last_scan_time));
-        print("\n");
-    }
-    last_scan_time = timer_read();
-    
-}
-#endif

keyboards/handwired/xealous/matrix_scanrate.h

@@ -1,4 +0,0 @@
-__attribute__((weak))
-void matrix_check_scan_rate(void) {}
-__attribute__((weak))
-void matrix_time_between_scans(void) {}

keyboards/handwired/xealous/rules.mk

@@ -1,4 +1,4 @@
-SRC += matrix_scanrate.c matrix.c
+SRC += matrix.c
 
 # MCU name
 MCU = atmega32u4

keyboards/helix/config.h

@@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -27,8 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   -include keyboards/helix/rev?/keymaps/MAPNAME/config.h
 //   XXXX.c
 
-#include <serial_config.h>
-
 // GCC include search path in qmk_firmare/keyboards/helix/
 //    #include "..." search starts here:
 //    #include <...> search starts here:
@@ -38,14 +35,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //     .
 //     ./tmk_core
 //     ......
-
-#ifdef USE_Link_Time_Optimization
-  // LTO has issues with macros (action_get_macro) and "functions" (fn_actions),
-  //  so just disable them
-  #define NO_ACTION_MACRO
-  #define NO_ACTION_FUNCTION
-
-  #define DISABLE_LEADER
-#endif // USE_Link_Time_Optimization
-
-#endif /* CONFIG_H */

keyboards/helix/helix.h

@@ -1,5 +1,4 @@
-#ifndef HELIX_H
-#define HELIX_H
+#pragma once
 
 #ifdef KEYBOARD_helix_rev1
     #include "rev1.h"
@@ -12,5 +11,3 @@
 #endif
 
 #include "quantum.h"
-
-#endif

keyboards/helix/pico/back/rules.mk

@@ -0,0 +1 @@
+LED_BACK_ENABLE = yes

keyboards/helix/pico/config.h

@@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef PICO_CONFIG_H
-#define PICO_CONFIG_H
+#pragma once
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
@@ -35,6 +34,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define USE_SERIAL
 //#define USE_MATRIX_I2C
 
+/* Soft Serial defines */
+#define SOFT_SERIAL_PIN D2
+#define SERIAL_SLAVE_BUFFER_LENGTH  ((MATRIX_ROWS)/2)
+#define SERIAL_MASTER_BUFFER_LENGTH ((MATRIX_ROWS)/2)
+
 /* Select hand configuration */
 #define MASTER_LEFT
 // #define MASTER_RIGHT
@@ -138,5 +142,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-
-#endif

keyboards/helix/pico/keymaps/biacco/rules.mk

@@ -1,125 +1,24 @@
-
-# Build Options
+# QMK Standard Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+#   See TOP/keyboards/helix/rules.mk for a list of options that can be set.
+#   See TOP/docs/config_options.md for more information.
+#
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = yes           # Audio output on port B5
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
-SWAP_HANDS_ENABLE = no        # Enable one-hand typing
+LINK_TIME_OPTIMIZATION_ENABLE = no  # if firmware size over limit, try this option
 
-define HELIX_CUSTOMISE_MSG
-  $(info Helix customize)
-  $(info -  OLED_ENABLE=$(OLED_ENABLE))
-  $(info -  LED_BACK_ENABLE=$(LED_BACK_ENABLE))
-  $(info -  LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE))
-  $(info -  LED_ANIMATION=$(LED_ANIMATIONS))
-  $(info -  IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE))
-endef
+# Helix Spacific Build Options
+# you can uncomment and edit follows 6 Variables
+#  jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。
+# OLED_ENABLE = no            # OLED_ENABLE
+# LOCAL_GLCDFONT = no         # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+# LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
+# LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
+LED_ANIMATIONS = no           # LED animations
+# IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
 
-# Helix keyboard customize
-# you can edit follows 6 Variables
-#  jp: 以下の6つの変数を必要に応じて編集します。
-OLED_ENABLE = no            # OLED_ENABLE
-LOCAL_GLCDFONT = no         # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
-LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
-LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
-LED_ANIMATIONS = no         # LED animations
-IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
-Link_Time_Optimization = no # if firmware size over limit, try this option
-
-####  LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
-####    Do not enable these with audio at the same time.
-
-### Helix keyboard 'default' keymap: convenient command line option
-##    make HELIX=<options> helix:defualt
-##    option= oled | back | under | na | ios
-##    ex.
-##      make HELIX=oled          helix:defualt
-##      make HELIX=oled,back     helix:defualt
-##      make HELIX=oled,under    helix:defualt
-##      make HELIX=oled,back,na  helix:defualt
-##      make HELIX=oled,back,ios helix:defualt
-##
-ifneq ($(strip $(HELIX)),)
-  ifeq ($(findstring oled,$(HELIX)), oled)
-    OLED_ENABLE = yes
-  endif
-  ifeq ($(findstring back,$(HELIX)), back)
-    LED_BACK_ENABLE = yes
-  else ifeq ($(findstring under,$(HELIX)), under)
-    LED_UNDERGLOW_ENABLE = yes
-  endif
-  ifeq ($(findstring na,$(HELIX)), na)
-    LED_ANIMATIONS = no
-  endif
-  ifeq ($(findstring ios,$(HELIX)), ios)
-    IOS_DEVICE_ENABLE = yes
-  endif
-  $(eval $(call HELIX_CUSTOMISE_MSG))
-  $(info )
-endif
-
-# Uncomment these for checking
-#   jp: コンパイル時にカスタマイズの状態を表示したい時はコメントをはずします。
-# $(eval $(call HELIX_CUSTOMISE_MSG))
-# $(info )
-
-ifeq ($(strip $(LED_BACK_ENABLE)), yes)
-  RGBLIGHT_ENABLE = yes
-  OPT_DEFS += -DRGBLED_BACK
-  ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
-    $(eval $(call HELIX_CUSTOMISE_MSG))
-    $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes')
-  endif
-else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
-  RGBLIGHT_ENABLE = yes
-else
-  RGBLIGHT_ENABLE = no
-endif
-
-ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
-    OPT_DEFS += -DIOS_DEVICE_ENABLE
-endif
-
-ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    OPT_DEFS += -DLED_ANIMATIONS
-endif
-
-ifeq ($(strip $(OLED_ENABLE)), yes)
-    OPT_DEFS += -DOLED_ENABLE
-endif
-
-ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
-    OPT_DEFS += -DLOCAL_GLCDFONT
-endif
-
-ifeq ($(strip $(AUDIO_ENABLE)),yes)
-  ifeq ($(strip $(RGBLIGHT_ENABLE)),yes)
-    Link_Time_Optimization = yes
-  endif
-  ifeq ($(strip $(OLED_ENABLE)),yes)
-    Link_Time_Optimization = yes
-  endif
-endif
-
-ifeq ($(strip $(Link_Time_Optimization)),yes)
-    EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
-endif
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-# Uncomment these for debugging
-# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
-# $(info -- OPT_DEFS=$(OPT_DEFS))
-# $(info )
+# convert Helix-specific options (that represent combinations of standard options)
+#   into QMK standard options.
+include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))

keyboards/helix/pico/keymaps/default/readme.md

@@ -95,16 +95,15 @@
 see `qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk`
 
 ```
-# Helix keyboard customize
-# you can edit follows 6 Variables
-#  jp: 以下の6つの変数を必要に応じて編集します。
-OLED_ENABLE = no            # OLED_ENABLE
-LOCAL_GLCDFONT = no         # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
-LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
-LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
-LED_ANIMATIONS = yes        # LED animations
-IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
-
+# Helix Spacific Build Options
+# you can uncomment and edit follows 6 Variables
+#  jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。
+# OLED_ENABLE = no            # OLED_ENABLE
+# LOCAL_GLCDFONT = no         # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+# LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
+# LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
+# LED_ANIMATIONS = yes        # LED animations
+# IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
 ```
 ## Compile
 
@@ -116,11 +115,18 @@ $ cd qmk_firmware
 build
 ```
 $ make helix/pico:default
+$ make helix/pico/back:default               # with backlight
+$ make HELIX=no_ani helix/pico/back:default  # with backlight without animation
+$ make helix/pico/under:default              # with underglow
 ```
 
 flash to keyboard
 ```
-$ make helix/pico:default:avrdude
+$ make helix/pico:default:flash
+$ make helix/pico/back:default:flash               # with backlight
+$ make HELIX=no_ani helix/pico/back:default:flash  # with backlight without animation
+$ make helix/pico/under:default:flash              # with underglow
+
 ```
 
 ## Link

keyboards/helix/pico/keymaps/default/readme_jp.md

@@ -56,31 +56,6 @@
 
 他の配列(Colemak,Dvorak)は、[readme.md](readme.md) を参照
 
-## コンパイルの仕方
-
-コンパイルは、qmk_firmware のトップディレクトリで行います。
-
-```
-$ cd qmk_firmware
-```
-qmk_firmwareでは各キーボードのコンパイルは、`<キーボード名>:<キーマップ名>`という指定で行います。
-
-```
-$ make helix/pico:default
-```
-
-キーボードへの書き込みまで同時に行うには下記のように`:avrdude`を付けます。
-
-```
-$ make helix/pico:default:avrdude
-```
-
-コンパイル結果と中間生成物を消去したい場合は以下のようにします。
-
-```
-$ make helix/pico:default:clean
-```
-
 ## カスタマイズ
 
 オプションの OLED をつけたり、
@@ -88,16 +63,15 @@ RGB バックライトまたは、RGB Underglow をつけた場合は、
 `qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk` の以下の部分を編集して機能を有効化してください。
 
 ```
-# Helix keyboard customize
-# you can edit follows 6 Variables
-#  jp: 以下の6つの変数を必要に応じて編集します。
-OLED_ENABLE = no            # OLED_ENABLE
-LOCAL_GLCDFONT = no         # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
-LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
-LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
-LED_ANIMATIONS = yes        # LED animations
-IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
-
+# Helix Spacific Build Options
+# you can uncomment and edit follows 6 Variables
+#  jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。
+# OLED_ENABLE = no            # OLED_ENABLE
+# LOCAL_GLCDFONT = no         # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
+# LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
+# LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
+# LED_ANIMATIONS = yes        # LED animations
+# IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
 ```
 
 ## RGB バックライトを有効にする
@@ -131,6 +105,43 @@ RBG Underglow や RGBバックライトの輝度を抑えて、iPad, iPhone に
 IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
 ```
 
+## コンパイルの仕方
+
+コンパイルは、qmk_firmware のトップディレクトリで行います。
+
+```
+$ cd qmk_firmware
+```
+qmk_firmwareでは各キーボードのコンパイルは、`<キーボード名>:<キーマップ名>`という指定で行います。
+
+```
+$ make helix/pico:default
+```
+
+キーボードへの書き込みまで同時に行うには下記のように`:flash`を付けます。
+
+```
+$ make helix/pico:default:flash
+```
+
+コンパイル結果と中間生成物を消去したい場合は以下のようにします。
+
+```
+$ make helix/pico:default:clean
+```
+
+上記の、rules.mk によるカスタマイズ項目の一部は下記のようにコマンド上で直接指定することも可能です。
+
+RGB バックライトを有効にしてコンパイルしてキーボードへ書き込む。
+```
+$ make helix/pico/back:default:flash
+```
+
+RGB Underglow を有効にしてコンパイルしてキーボードへ書き込む。
+```
+$ make helix/pico/under:default:flash
+```
+
 ## リンク
 
 * さらに詳細は、[こちら helix/Doc/firmware_jp.md](https://github.com/MakotoKurauchi/helix/blob/master/Doc/firmware_jp.md)をご覧ください。