Fix detection of ModemManager (#7076)

* Add pok3r-like keymap for dz60.

* Replace KC_TRNS with underscores

docs/coding_conventions_c.md

@@ -31,17 +31,17 @@ Here is an example for easy reference:
 ```c
 /* Enums for foo */
 enum foo_state {
-  FOO_BAR,
-  FOO_BAZ,
+    FOO_BAR,
+    FOO_BAZ,
 };
 
 /* Returns a value */
 int foo(void) {
-  if (some_condition) {
-    return FOO_BAR;
-  } else {
-    return -1;
-  }
+    if (some_condition) {
+        return FOO_BAR;
+    } else {
+        return -1;
+    }
 }
 ```
 

docs/config_options.md

@@ -310,13 +310,13 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i
 Use these to enable or disable building certain features. The more you have enabled the bigger your firmware will be, and you run the risk of building a firmware too large for your MCU.
 
 * `BOOTMAGIC_ENABLE`
-  * Virtual DIP switch configuration(+1000)
+  * Virtual DIP switch configuration
 * `MOUSEKEY_ENABLE`
-  * Mouse keys(+4700)
+  * Mouse keys
 * `EXTRAKEY_ENABLE`
-  * Audio control and System control(+450)
+  * Audio control and System control
 * `CONSOLE_ENABLE`
-  * Console for debug(+400)
+  * Console for debug
 * `COMMAND_ENABLE`
   * Commands for debug and configuration
 * `COMBO_ENABLE`
@@ -348,7 +348,7 @@ Use these to enable or disable building certain features. The more you have enab
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.
 * `LINK_TIME_OPTIMIZATION_ENABLE`
-  = Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` 
+  = Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION`
 
 ## USB Endpoint Limitations
 

docs/feature_hd44780.md

@@ -2,7 +2,7 @@
 
 This is an integration of Peter Fleury's LCD library. This page will explain the basics. [For in depth documentation visit his page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
 
-You can enable support for HD44780 Displays by setting the `HD44780_ENABLE` flag in your keyboards `rules.mk` to yes. This will use about 400 KB of extra space.
+You can enable support for HD44780 Displays by setting the `HD44780_ENABLE` flag in your keyboards `rules.mk` to yes.
 
 ## Configuration
 
@@ -26,7 +26,7 @@ Uncomment the section labled HD44780 and change the parameters as needed.
 #define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
 #define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
 #define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2 
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
 #define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
 #define LCD_RS_PORT      LCD_PORT     //< port for RS line        
 #define LCD_RS_PIN       3            //< pin  for RS line        
@@ -39,14 +39,14 @@ Uncomment the section labled HD44780 and change the parameters as needed.
 
 Should you need to configure other properties you can copy them from `quantum/hd44780.h` and set them in your `config.h`
 
-## Usage 
+## Usage
 
 To initialize your display, call `lcd_init()` with one of these parameters:
 ````
 LCD_DISP_OFF             : display off
 LCD_DISP_ON              : display on, cursor off
 LCD_DISP_ON_CURSOR       : display on, cursor on
-LCD_DISP_ON_CURSOR_BLINK : display on, cursor on flashing 
+LCD_DISP_ON_CURSOR_BLINK : display on, cursor on flashing
 ````
 This is best done in your keyboards `matrix_init_kb` or your keymaps `matrix_init_user`.  
 It is advised to clear the display before use.  

docs/feature_terminal.md

@@ -1,6 +1,6 @@
 # Terminal
 
-> This feature is currently *huge* at 4400 bytes, and should probably only be put on boards with a lot of memory, or for fun.
+> This feature is currently *huge*, and should probably only be put on boards with a lot of memory, or for fun.
 
 The terminal feature is a command-line-like interface designed to communicate through a text editor with keystrokes. It's beneficial to turn off auto-indent features in your editor.
 
@@ -56,7 +56,7 @@ Outputs the last 5 commands entered
 1. help
 2. about
 3. keymap 0
-4. help 
+4. help
 5. flush-buffer
 ```
 

docs/getting_started_make_guide.md

@@ -41,8 +41,6 @@ Set these variables to `no` to disable them, and `yes` to enable them.
 
 This allows you to hold a key and the salt key (space by default) and have access to a various EEPROM settings that persist over power loss. It's advised you keep this disabled, as the settings are often changed by accident, and produce confusing results that makes it difficult to debug. It's one of the more common problems encountered in help sessions.
 
-Consumes about 1000 bytes.
-
 `MOUSEKEY_ENABLE`
 
 This gives you control over cursor movements and clicks via keycodes/custom functions.
@@ -67,8 +65,6 @@ To see the text, open `hid_listen` and enjoy looking at your printed messages.
 
 **NOTE:** Do not include *uprint* messages in anything other than your keymap code. It must not be used within the QMK system framework. Otherwise, you will bloat other people's .hex files.
 
-Consumes about 400 bytes.
-
 `COMMAND_ENABLE`
 
 This enables magic commands, typically fired with the default magic key combo `LSHIFT+RSHIFT+KEY`. Magic commands include turning on debugging messages (`MAGIC+D`) or temporarily toggling NKRO (`MAGIC+N`).
@@ -125,11 +121,9 @@ Use this to debug changes to variable values, see the [tracing variables](unit_t
 
 This enables using the Quantum SYSEX API to send strings (somewhere?)
 
-This consumes about 5390 bytes.
-
 `KEY_LOCK_ENABLE`
 
-This enables [key lock](feature_key_lock.md). This consumes an additional 260 bytes.
+This enables [key lock](feature_key_lock.md).
 
 `SPLIT_KEYBOARD`
 

keyboards/crkbd/keymaps/tominabox1/keymap.c

@@ -0,0 +1,46 @@
+#include QMK_KEYBOARD_H
+#include "tominabox1.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_wrapper(
+    ___________________CRKBD1__________________,
+    ___________________CRKBD2__________________,
+    ___________________CRKBD3__________________,
+    ___________________CRKBD4__________________
+  ),
+
+  [_RAISE] = LAYOUT_wrapper(
+    ___________________RAISE1__________________,
+    ___________________RAISE2__________________,
+    ___________________CRKBD_RAISE3____________,
+    ___________________CRKBD_RAISE4____________
+  ),
+
+  [_LOWER] = LAYOUT_wrapper(
+    _________________LOWER_1___________________,
+    _________________LOWER_2___________________,
+    ___________________CRKBD_LOW3______________,
+    ___________________CRKBD_LOW4______________
+  ),
+
+  [_ADJUST] = LAYOUT_wrapper(
+    ___________________ADJST1__________________,
+    ___________________CRKBD_ADJST2____________,
+    ___________________CRKBD_ADJST3____________,
+    ___________________CRKBD_ADJST4____________
+  ),
+
+  [_ARROW] = LAYOUT_wrapper(
+    ___________________ARROW1__________________,
+    ___________________ARROW2__________________,
+    ___________________ARROW3__________________,
+    ___________________ARROW4__________________
+   ),
+   [_FKEY] = LAYOUT_wrapper(
+    ___________________FKEY1___________________,
+    ___________________FKEY2___________________,
+    ___________________CRKBD_FKEY3_____________,
+    ___________________CRKBD_FKEY4_____________
+  )
+
+};

keyboards/dz60/keymaps/pok3r/keymap.c

@@ -0,0 +1,25 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT(
+		KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_NO, MO(2), KC_RCTL),
+
+	LAYOUT(
+		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL,
+		_______, KC_MPRV, KC_MPLY, KC_MNXT, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, _______,
+		KC_CAPS, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_DEL, _______,
+		_______, KC_APP, _______, _______, _______, _______, KC_END, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+
+	LAYOUT(
+		RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, _______, RGB_RMOD, RGB_MOD, _______, _______,
+		_______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+};

keyboards/dztech/dz65rgb/dz65rgb.c

@@ -114,3 +114,12 @@ void suspend_wakeup_init_kb(void)
     rgb_matrix_set_suspend_state(false);
     suspend_wakeup_init_user();
 }
+
+__attribute__ ((weak))
+void rgb_matrix_indicators_user(void)
+{
+    if (IS_LED_ON(host_keyboard_leds(), USB_LED_CAPS_LOCK))
+    {
+        rgb_matrix_set_color(8, 0xFF, 0xFF, 0xFF);
+    }
+}

keyboards/dztech/dz65rgb/keymaps/default/keymap.c

@@ -16,14 +16,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		    KC_TRNS,       KC_TRNS,  KC_TRNS,                  KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,  KC_MPRV,          KC_VOLD,  KC_MNXT),
 };
 
-void rgb_matrix_indicators_user(void)
-{
-	    if (IS_LED_ON(host_keyboard_leds(), USB_LED_CAPS_LOCK))
-	    {
-	      rgb_matrix_set_color(8, 0xFF, 0xFF, 0xFF);
-	    }
-}
-
 void matrix_init_user(void)
 {
   //user initialization

keyboards/handwired/hnah108/hnah108.h

@@ -40,14 +40,14 @@
 }
 
 #define LAYOUT_fullsize_iso( \
-    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,                          \
+    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,      k65, k66, k67, k68, \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k70, k71, k72,     k73, k74, k75,      k76, k77, k78, k69,  \
     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k80, k81,          k83, k84, k85,      k86, k87, k79, k6A, \
     k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k91, k93, k94,                         k96, k97, k88, \
     k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k90,      k92,          k95,           k98, k99, k89, k7A, \
     k50, k51, k52,                k53,                k54, k55, k56, k57,     k58, k59, k5A,      k9A,      k8A \
 ) LAYOUT_all( \
-    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,      KC_NO, KC_NO, KC_NO, KC_NO, \
+    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,      k65, k66, k67, k68, \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k70, k71, k72,     k73, k74, k75,      k76, k77, k78, k69,  \
     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k80, k81, KC_NO,   k83, k84, k85,      k86, k87, k79, k6A, \
     k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k91, k93, k94,                         k96, k97, k88, \
@@ -56,14 +56,14 @@
 )
 
 #define LAYOUT_fullsize_ansi( \
-    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,                          \
+    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,      k65, k66, k67, k68,  \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k70, k71, k72,     k73, k74, k75,      k76, k77, k78, k69,  \
     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k80, k81, k82,     k83, k84, k85,      k86, k87, k79, k6A, \
     k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k91,      k94,                         k96, k97, k88, \
     k40,      k42, k43, k44, k45, k46, k47, k48, k49, k4A, k90,      k92,          k95,           k98, k99, k89, k7A, \
     k50, k51, k52,                k53,                k54, k55, k56, k57,     k58, k59, k5A,      k9A,      k8A \
 ) LAYOUT_all( \
-    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,      KC_NO, KC_NO, KC_NO, KC_NO, \
+    k00,      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k60, k61,     k62, k63, k64,      k65, k66, k67, k68, \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k70, k71, k72,     k73, k74, k75,      k76, k77, k78, k69,  \
     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k80, k81, k82,     k83, k84, k85,      k86, k87, k79, k6A, \
     k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k91,KC_NO,k94,                         k96, k97, k88, \

keyboards/handwired/hnah108/info.json

@@ -6,13 +6,13 @@
     "height": 6.25, 
     "layouts": {
         "LAYOUT_all": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"x":18.5, "y":0}, {"x":19.5, "y":0}, {"x":20.5, "y":0}, {"x":21.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Num Lock", "x":18.5, "y":1.25}, {"label":"/", "x":19.5, "y":1.25}, {"label":"*", "x":20.5, "y":1.25}, {"label":"-", "x":21.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"7", "x":18.5, "y":2.25}, {"label":"8", "x":19.5, "y":2.25}, {"label":"9", "x":20.5, "y":2.25}, {"label":"+", "x":21.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"@", "x":11.75, "y":3.25}, {"label":"~", "x":12.75, "y":3.25}, {"label":"4", "x":18.5, "y":3.25}, {"label":"5", "x":19.5, "y":3.25}, {"label":"6", "x":20.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"1", "x":18.5, "y":4.25}, {"label":"2", "x":19.5, "y":4.25}, {"label":"3", "x":20.5, "y":4.25}, {"label":"Enter", "x":21.5, "y":4.25, "h":2}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}, {"label":"0", "x":18.5, "y":5.25, "w":2}, {"label":".", "x":20.5, "y":5.25}]
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"x":18.5, "y":0}, {"x":19.5, "y":0}, {"x":20.5, "y":0}, {"x":21.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Num Lock", "x":18.5, "y":1.25}, {"label":"/", "x":19.5, "y":1.25}, {"label":"*", "x":20.5, "y":1.25}, {"label":"-", "x":21.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"7", "x":18.5, "y":2.25}, {"label":"8", "x":19.5, "y":2.25}, {"label":"9", "x":20.5, "y":2.25}, {"label":"+", "x":21.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"@", "x":11.75, "y":3.25}, {"label":"~", "x":12.75, "y":3.25}, {"label":"Enter", "x":13.75, "y":3.25, "w":1.25}, {"label":"4", "x":18.5, "y":3.25}, {"label":"5", "x":19.5, "y":3.25}, {"label":"6", "x":20.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"1", "x":18.5, "y":4.25}, {"label":"2", "x":19.5, "y":4.25}, {"label":"3", "x":20.5, "y":4.25}, {"label":"Enter", "x":21.5, "y":4.25, "h":2}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}, {"label":"0", "x":18.5, "y":5.25, "w":2}, {"label":".", "x":20.5, "y":5.25}]
         },
         "LAYOUT_fullsize_iso": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Num Lock", "x":18.5, "y":1.25}, {"label":"/", "x":19.5, "y":1.25}, {"label":"*", "x":20.5, "y":1.25}, {"label":"-", "x":21.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"7", "x":18.5, "y":2.25}, {"label":"8", "x":19.5, "y":2.25}, {"label":"9", "x":20.5, "y":2.25}, {"label":"+", "x":21.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"@", "x":11.75, "y":3.25}, {"label":"~", "x":12.75, "y":3.25}, {"label":"4", "x":18.5, "y":3.25}, {"label":"5", "x":19.5, "y":3.25}, {"label":"6", "x":20.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"1", "x":18.5, "y":4.25}, {"label":"2", "x":19.5, "y":4.25}, {"label":"3", "x":20.5, "y":4.25}, {"label":"Enter", "x":21.5, "y":4.25, "h":2}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}, {"label":"0", "x":18.5, "y":5.25, "w":2}, {"label":".", "x":20.5, "y":5.25}]
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"x":18.5, "y":0}, {"x":19.5, "y":0}, {"x":20.5, "y":0}, {"x":21.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Num Lock", "x":18.5, "y":1.25}, {"label":"/", "x":19.5, "y":1.25}, {"label":"*", "x":20.5, "y":1.25}, {"label":"-", "x":21.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"7", "x":18.5, "y":2.25}, {"label":"8", "x":19.5, "y":2.25}, {"label":"9", "x":20.5, "y":2.25}, {"label":"+", "x":21.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"@", "x":11.75, "y":3.25}, {"label":"~", "x":12.75, "y":3.25}, {"label":"4", "x":18.5, "y":3.25}, {"label":"5", "x":19.5, "y":3.25}, {"label":"6", "x":20.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"1", "x":18.5, "y":4.25}, {"label":"2", "x":19.5, "y":4.25}, {"label":"3", "x":20.5, "y":4.25}, {"label":"Enter", "x":21.5, "y":4.25, "h":2}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}, {"label":"0", "x":18.5, "y":5.25, "w":2}, {"label":".", "x":20.5, "y":5.25}]
         },
         "LAYOUT_fullsize_ansi": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Num Lock", "x":18.5, "y":1.25}, {"label":"/", "x":19.5, "y":1.25}, {"label":"*", "x":20.5, "y":1.25}, {"label":"-", "x":21.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"7", "x":18.5, "y":2.25}, {"label":"8", "x":19.5, "y":2.25}, {"label":"9", "x":20.5, "y":2.25}, {"label":"+", "x":21.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"@", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"4", "x":18.5, "y":3.25}, {"label":"5", "x":19.5, "y":3.25}, {"label":"6", "x":20.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"1", "x":18.5, "y":4.25}, {"label":"2", "x":19.5, "y":4.25}, {"label":"3", "x":20.5, "y":4.25}, {"label":"Enter", "x":21.5, "y":4.25, "h":2}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}, {"label":"0", "x":18.5, "y":5.25, "w":2}, {"label":".", "x":20.5, "y":5.25}]
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"x":18.5, "y":0}, {"x":19.5, "y":0}, {"x":20.5, "y":0}, {"x":21.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Num Lock", "x":18.5, "y":1.25}, {"label":"/", "x":19.5, "y":1.25}, {"label":"*", "x":20.5, "y":1.25}, {"label":"-", "x":21.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"7", "x":18.5, "y":2.25}, {"label":"8", "x":19.5, "y":2.25}, {"label":"9", "x":20.5, "y":2.25}, {"label":"+", "x":21.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"4", "x":18.5, "y":3.25}, {"label":"5", "x":19.5, "y":3.25}, {"label":"6", "x":20.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"1", "x":18.5, "y":4.25}, {"label":"2", "x":19.5, "y":4.25}, {"label":"3", "x":20.5, "y":4.25}, {"label":"Enter", "x":21.5, "y":4.25, "h":2}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}, {"label":"0", "x":18.5, "y":5.25, "w":2}, {"label":".", "x":20.5, "y":5.25}]
         }
     }
 }

keyboards/handwired/hnah108/keymaps/default/keymap.c

@@ -44,17 +44,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 void encoder_update_user(uint8_t index, bool clockwise) {
-  if (IS_LAYER_ON(_FN)) { /* First encoder */
+  if (index == 0) {
+    if (IS_LAYER_ON(_FN)) { 
     if (clockwise) {
-      rgb_matrix_step();
+            tap_code(KC_BRIU);
     } else {
-      rgb_matrix_step_reverse();	
+            tap_code(KC_BRID);
     }
   } else {
     if (clockwise) {
-      rgb_matrix_increase_speed();
+            tap_code(KC_VOLU);
+
     } else {
-      rgb_matrix_decrease_speed();
+            tap_code(KC_VOLD);
+      }
     }
   }
 }

keyboards/handwired/hnah108/rules.mk

@@ -27,7 +27,7 @@ BOOTLOADER = atmel-dfu
 #
 BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no        # Console for debug(+400)
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -44,6 +44,3 @@ FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 ENCODER_ENABLE = yes
 RGB_MATRIX_ENABLE = WS2812
-
-# Supported layouts
-LAYOUTS = fullsize_ansi fullsize_iso

keyboards/handwired/splittest/teensy_2/config.h

@@ -29,5 +29,3 @@
 
 // teensy has vbus detection issues - use usb detection instead
 #define SPLIT_USB_DETECT
-// required for teensy slave otherwise it "locks up" during startup
-#define NO_USB_STARTUP_CHECK

keyboards/hhkb/keymaps/tominabox1/.gitignore

@@ -0,0 +1,3 @@
+*.h
+matrix.c
+rules.mk

keyboards/hhkb/keymaps/tominabox1/keymap.c

@@ -0,0 +1,12 @@
+#include QMK_KEYBOARD_H
+#include "tominabox1.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC, KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, TD(TD_SFT_CPS), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(2)),
+
+	[1] = LAYOUT(KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_CAPS, KC_MFFD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC__MUTE, KC__VOLDOWN, KC__VOLUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	[2] = LAYOUT(KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS),
+
+    [3] = LAYOUT(KC_GESC, KC_EXLM, KC_EML, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PGDN, KC_UP, KC_PGUP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS)
+};

keyboards/kbdfans/kbd6x/keymaps/mekberg/config.h

@@ -0,0 +1,5 @@
+#pragma once
+
+// Define some configuration for modtap behavior
+// #define TAPPING_TERM 150
+#define PERMISSIVE_HOLD

keyboards/kbdfans/kbd6x/keymaps/mekberg/keymap.c

@@ -0,0 +1,98 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// #define MY_LOCK C(A(KC_L))      // Mac: Custom lock hotkey in BTT
+#define MY_LOCK C(LCMD(KC_L))      // Mac: Custom lock hotkey in BTT (when Alt/Command have been swapped in macOS)
+
+/*
+KBD6x ANSI physical layout
+1u == 8chars
+    ┌─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
+    |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |
+    |─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────|
+    |    1,5u    |        |        |        |        |        |        |        |        |        |        |        |        |     1,5u   |
+    |─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────|
+    |     1,75u    |        |        |        |        |        |        |        |        |        |        |        |        1,25u      |
+    |─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────|
+    |       2,25u      |        |        |        |        |        |        |        |        |        |        |     1,75u     |        |
+    └─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
+                 |        |   1,25u    |                                                        |   1,25u    |        |
+                 └────────────────────────────────────────────────────────────────────────────────────────────────────┘
+*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT(
+//  ┌─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
+//  |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |
+      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_NUBS,KC_NUHS,
+//  |─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────|
+//  |    1,5u    |        |        |        |        |        |        |        |        |        |        |        |        |     1,5u   |
+     LT(2,KC_TAB), KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,     KC_O,    KC_P,    KC_LBRC, KC_RBRC,   KC_BSPC,
+//  |─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────|
+//  |     1,75u    |        |        |        |        |        |        |        |        |        |        |        |        1,25u      |
+         KC_LCTL,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,      KC_ENT,
+//  |─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────|
+//  |   1,25u          |        |        |        |        |        |        |        |        |        |        |     1,75u     |        |
+           KC_LSFT,       KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,    KC_RSFT,     MO(1),
+//  └─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
+//                   |        |   1,25u    |                                                        |   1,25u    |        |
+         XXXXXXX,     KC_LGUI,   KC_LALT,                         KC_SPACE,                            KC_RALT,   KC_RGUI,      XXXXXXX
+//                   └────────────────────────────────────────────────────────────────────────────────────────────────────┘
+  ),
+
+//  Fn layer, left hand free
+//  F-keys, RGB controls, media controls, Keyboard functions
+  [1] = LAYOUT(
+//  ┌─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
+//  |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, _______,  RESET,
+//  |─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────|
+//  |    1,5u    |        |        |        |        |        |        |        |        |        |        |        |        |     1,5u   |
+      _______,   _______,  _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______,   _______,
+//  |─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────|
+//  |     1,75u    |        |        |        |        |        |        |        |        |        |        |        |        1,25u      |
+        KC_RCTL,    KC_VOLD, KC_VOLU, KC_MUTE, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______,       MY_LOCK,
+//  |─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────|
+//  |   1,25u          |        |        |        |        |        |        |        |        |        |        |     1,75u     |        |
+          _______,      BL_TOGG,  BL_INC,  BL_DEC, BL_STEP, _______, _______, _______, KC_MRWD, KC_MFFD, _______,    _______,     _______,
+//  └─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
+//                   |        |   1,25u    |                                                        |   1,25u    |        |
+         XXXXXXX,     _______,  _______,                          KC_MPLY,                            _______,    _______,      XXXXXXX
+//                   └────────────────────────────────────────────────────────────────────────────────────────────────────┘
+  ),
+
+//  Left Tab-Hold layer, right hand free
+//  Nav-keys
+  [2] = LAYOUT(
+//  ┌─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
+//  |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |
+     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  KC_INS, KC_BSPC,
+//  |─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────|
+//  |    1,5u    |        |        |        |        |        |        |        |        |        |        |        |        |     1,5u   |
+      _______,    _______, _______, _______, _______, _______, KC_END,  KC_PGDN, KC_UP,   KC_PGUP, KC_HOME, _______, _______,    KC_DEL,
+//  |─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────|
+//  |     1,75u    |        |        |        |        |        |        |        |        |        |        |        |        1,25u      |
+       _______,     _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,       _______,
+//  |─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────|
+//  |   1,25u          |        |        |        |        |        |        |        |        |        |        |     1,75u     |        |
+          _______,      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______,     _______,
+//  └─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
+//                   |        |   1,25u    |                                                        |   1,25u    |        |
+         XXXXXXX,     _______,  _______,                         _______,                             _______,    _______,      XXXXXXX
+//                   └────────────────────────────────────────────────────────────────────────────────────────────────────┘
+  ),
+};

keyboards/kbdfans/kbd6x/keymaps/mekberg/readme.md

@@ -0,0 +1,14 @@
+# General Information
+
+This is more or less a HHKB base layout, but with completely different Fn layers. I don't use most of the HHKB secondary key positions because, honestly, they make no sense to me at all.
+
+Fn key layer is focused mostly on keyboard firmware features (like RGB) as well as some of the necessary alternate functions. It also hold media controls, F-keys and Reset.
+
+Left Tab-Hold layer is focused on nav cluster functionality, and turns Backspace into Delete (and moves Backspace up into the top right 1u position).
+
+
+# Build instructions
+
+To simply build the firmware file: `make clean && make kbdfans/kbd6x:mekberg`
+
+To build and immediately flash: `make clean && make kbdfans/kbd6x:mekberg:dfu`

keyboards/kbdfans/kbd6x/keymaps/mekberg/rules.mk

@@ -0,0 +1,2 @@
+NKRO_ENABLE = yes            # USB Nkey Rollover
+CONSOLE_ENABLE = no        # Console for debug

keyboards/lazydesigners/dimple/keymaps/tominabox1/keymap.c

@@ -0,0 +1,109 @@
+#include QMK_KEYBOARD_H
+#include "tominabox1.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Base COLEMAK layer
+ * ,---------------------------------------------------------------.
+ * |GEsc| Q  | W  | F  | P  | G  | J  | L  | U  | Y  | :  |  Bspc  |
+ * |---------------------------------------------------------------|
+ * |Tab-Ctl| A  | R  | S  | T  | D  | H  | N  | E  | I  | O  |Quote|
+ * |---------------------------------------------------------------|
+ * |Shft/Cap| Z  | X  | C  | V  | B  | K  | M  | ,  | Up |    .    |
+ * |---------------------------------------------------------------|
+ *      |Ctrl|Gui |Alt | Spc/Lwr |   Spc/Rse   |Left|Down|Rght|
+ *      `-----------------------------------------------------'
+ */
+
+	[_BASE] = LAYOUT_wrapper(
+    __________________DIMPLE1__________________,
+    __________________DIMPLE2__________________,
+		__________________DIMPLE3L_________________,__________________DIMPLE3R_________________,
+		__________________DIMPLE4__________________
+	),
+
+/* Lower Symbol Layer
+ * ,---------------------------------------------------------------.
+ * | ~  | !  | @  | #  | $  | %  | ^  | &  | *  | (  | )  |   Del  |
+ * |---------------------------------------------------------------|
+ * | Del  |    |    |    |    |    |    | _  | +  | {  | }  |  |   |
+ * |---------------------------------------------------------------|
+ * |        |    |    |    |    |    |    |    | ;  |PgUp|   ?     |
+ * |---------------------------------------------------------------|
+ *      |   |    |    |         |              |Home|PgDn|End |
+ *      `-----------------------------------------------------'
+ */
+
+	[_LOWER] = LAYOUT_wrapper(
+		_________________LOWER_1___________________,
+    _________________LOWER_2___________________,
+		_________________LOWER_3___________________,
+		_________________LOWER_4___________________
+	),
+
+/* Raise Number Layer
+ * ,---------------------------------------------------------------.
+ * | `  | 1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | 0  |   Bspc |
+ * |---------------------------------------------------------------|
+ * | Ins  |    |    |    |    |    |    | -  | =  | [  | ]  |  \   |
+ * |---------------------------------------------------------------|
+ * |        |    |    |    |    |    |    |    |    |  . |   /     |
+ * |---------------------------------------------------------------|
+ *      |VolD|Mute|VolU|         |             |    |    |    |
+ *      `-----------------------------------------------------'
+ */
+
+	[_RAISE] = LAYOUT_wrapper(
+	___________________RAISE1__________________,
+	___________________RAISE2__________________,
+	___________________RAISE3__________________,
+	___________________RAISE4__________________
+
+	),
+
+/*  Adjust Layer
+ * ,---------------------------------------------------------------.
+ * |RST |EEP |    |    |    |    |    |    |    |    |    |        |
+ * |---------------------------------------------------------------|
+ * | MP   |    |    |    |    |    |    |    |    |    |    |      |
+ * |---------------------------------------------------------------|
+ * | MODE   | HUI| HUD|M_SN|    |    |    |    |    |    |         |
+ * |---------------------------------------------------------------|
+ *      |RGB-|RGB |RGB+|         |             |    |    |    |
+ *      `-----------------------------------------------------'
+ */
+
+	[_ADJUST] = LAYOUT_wrapper(
+	___________________ADJST1__________________,
+	___________________ADJST2__________________,
+	___________________ADJST3__________________,
+ 	___________________ADJST4__________________
+
+  ),
+/* Fkey Layer
+* ,---------------------------------------------------------------.
+* |    | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10|        |
+* |---------------------------------------------------------------|
+* |      |    |    |    |    |    |    |    |    | F11| F12|      |
+* |---------------------------------------------------------------|
+* |        |    |    |    |    |    |    |    |    |    |         |
+* |---------------------------------------------------------------|
+*      |    |    |    |         |             |FKEY|    |    |
+*      `-----------------------------------------------------'
+*/
+
+  [_FKEY] = LAYOUT_wrapper(
+	___________________FKEY1___________________,
+	___________________FKEY2___________________,
+	___________________FKEY3___________________,
+	___________________FKEY4___________________
+  ),
+};
+
+void led_set_user(uint8_t usb_led) {
+if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+	writePinLow(E6);
+	} else {
+	writePinHigh(E6);
+	}
+}

keyboards/maartenwut/plain60/keymaps/via/keymap.c

@@ -0,0 +1,17 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _MA 0
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT(
+  KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          \
+  KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,           \
+  KC_LSFT, KC_NUBS, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,            \
+  KC_LCTL, KC_LGUI, KC_LALT,                        KC_SPC,                          KC_RALT, KC_RGUI, KC_APP,  KC_RCTRL)
+};

keyboards/maartenwut/plain60/keymaps/via/rules.mk

@@ -0,0 +1,6 @@
+# rules.mk overrides to enable VIA
+SRC += keyboards/wilba_tech/wt_main.c
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+

keyboards/maartenwut/plain60/rules.mk

@@ -1,4 +1,3 @@
-SRC += keyboards/wilba_tech/wt_main.c
 # MCU name
 MCU = atmega32u4
 
@@ -62,7 +61,6 @@ MIDI_ENABLE = no 		# MIDI controls
 AUDIO_ENABLE = no
 UNICODE_ENABLE = no 		# Unicode
 BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
 
 LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso 60_tsangan_hhkb
+

keyboards/planck/keymaps/smittey/config.h

@@ -0,0 +1,16 @@
+#pragma once
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MIDI_BASIC
+
+// Most tactile encoders have detents every 4 stages
+#define ENCODER_RESOLUTION 4

keyboards/planck/keymaps/smittey/keymap.c

@@ -0,0 +1,375 @@
+/* Copyright 2015-2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "muse.h"
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST,
+  _FN,
+  _SPACE_FN
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  BACKLIT,
+  EXT_PLV
+};
+
+// Fillers to make layering more clear
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define FN MO(_FN)
+#define SPACE_FN LT(_SPACE_FN, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty                                                                              
+  * ,-----------------------------------------------------------------------------------.
+  * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * | Ctrl |  FN  | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_QWERTY] = LAYOUT_planck_grid(
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,      KC_Y,      KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+      KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,      KC_H,      KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,      KC_N,      KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MT(MOD_LSFT, KC_ENT),
+      KC_LCTL, FN,      KC_LALT, KC_LGUI, LOWER,   SPACE_FN,  SPACE_FN,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+
+
+  /* Lower
+  * ,-----------------------------------------------------------------------------------.
+  * |      |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * |      |      |      |      |      |      |   *  |   4  |   5  |   6  |   -  |      |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * |      |      |      |      |      |      |   /  |   1  |   2  |   3  |   +  |Enter |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * |      |      |      |      |      |    Space    |      |   0  |   .  |   =  |      |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_LOWER] = LAYOUT_planck_grid(
+      XXXXXXX, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,     KC_7,     KC_8,    KC_9,     KC_0,     KC_BSPC, 
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_ASTR,  KC_4,     KC_5,    KC_6,     KC_MINS,  XXXXXXX, 
+      _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLSH,  KC_1,     KC_2,    KC_3,     KC_PLUS,  MT(MOD_LSFT, KC_ENT), 
+      _______, XXXXXXX, _______, _______, _______, KC_SPC,  KC_SPC,   _______,  KC_0,    KC_DOT,   KC_EQL,   XXXXXXX
+  ),
+
+  /* Raise
+  * ,-----------------------------------------------------------------------------------.
+  * |   `  |   !  |   "  |   £  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * |      |   ~  |   #  |   /  |   {  |   [  |   ]  |   }  |   \  |   -  |   =  |  |   |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * |      |      |      |      |      |      |      |      |      |   _  |   +  |Enter |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * |      |      |      |      |      |    Space    |      | Home | PgDn | PgUp | End  |            
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_RAISE] = LAYOUT_planck_grid(
+      KC_GRV,   KC_EXLM, KC_DQUO,  LALT(KC_4), KC_DLR,   KC_PERC,  KC_CIRC,  KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, 
+      XXXXXXX,  KC_TILD, KC_NUHS,  KC_SLSH,    KC_LCBR,  KC_LBRC,  KC_RBRC,  KC_RCBR, KC_BSLS, KC_MINS, KC_EQL,  KC_PIPE, 
+      XXXXXXX,  XXXXXXX, XXXXXXX,  XXXXXXX,    XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, MT(MOD_LSFT, KC_ENT), 
+      _______,  XXXXXXX, _______,  _______,    _______,  KC_SPC,   KC_SPC,   _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
+  ),
+
+
+  /* fn
+  * ,-----------------------------------------------------------------------------------.
+  * |DelWrd|  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  | F10  | Del  |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * |      |  F11 |  F12 |      |      |      |      |      |      |      |      |      |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * |      |      |      |      |      |      |      |      |      |      |      | Enter|
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * |      |      |      |      |      |    Space    |      |      |      |      |      |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_FN] = LAYOUT_planck_grid(
+      LALT(KC_BSPC),  KC_F1,   KC_F2,   KC_F3,   KC_F4,    KC_F5,    KC_F6,    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_DEL, 
+      XXXXXXX,        KC_F11,  KC_F12,  XXXXXXX, XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
+      XXXXXXX,        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
+      XXXXXXX,        _______, XXXXXXX, XXXXXXX, XXXXXXX,  KC_SPC,   KC_SPC,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+  ),
+
+
+  /* Space fn
+  * ,-----------------------------------------------------------------------------------.
+  * |PRNT SC|      |  UP  |      |      |      |      |      |      |      |      |SLEEP |
+  * |-------+------+------+------+------+-------------+------+------+------+------+------|
+  * |       | LEFT | DOWN | RIGHT|      |      |      | LEFT | DOWN |  UP  | RIGHT|      |
+  * |-------+------+------+------+------+------|------+------+------+------+------+------| 
+  * |       |      |      |      |      |      |      |      |      |      |      |      |
+  * |-------+------+------+------+------+------+------+------+------+------+------+------|
+  * |       |      |      |      |      |             |      | MUTE |VOLDWN|VOL UP|      |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_SPACE_FN] = LAYOUT_planck_grid(
+      KC_PSCR,  XXXXXXX, KC_UP,    XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX,  XXXXXXX,     XXXXXXX,    KC_SLEP, 
+      XXXXXXX,  KC_LEFT, KC_DOWN,  KC_RIGHT,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_LEFT, KC_DOWN,  KC_UP,       KC_RIGHT,   XXXXXXX, 
+      XXXXXXX,  XXXXXXX, XXXXXXX,  XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX,  XXXXXXX,     XXXXXXX,    XXXXXXX, 
+      XXXXXXX,  XXXXXXX, XXXXXXX,  XXXXXXX,   XXXXXXX,  _______,  _______,  XXXXXXX, KC__MUTE, KC__VOLDOWN, KC__VOLUP,  XXXXXXX
+  ),
+
+
+  /* Adjust (Lower + Raise)
+  * ,-----------------------------------------------------------------------------------.
+  * | Reset|Qwerty|      |      |      |      |      |      |      |MIDIof|MIDIon|  Del |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * |      |      |      |Dvorak|      |AGnorm|AGswap|      |      |Audoff|Aud on|      |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * |      |      |      |Colemk|      |      |      |      |      |Musoff|Mus on|      |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * |Plover|      |      |      |      |             |      |      |Voice-|Voice+|      |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_ADJUST] = LAYOUT_planck_grid(
+      RESET,   QWERTY,  XXXXXXX,   XXXXXXX,   XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   MI_OFF,   MI_ON,   KC_DEL,
+      XXXXXXX, XXXXXXX, XXXXXXX,   DVORAK,    XXXXXXX,  AG_NORM, AG_SWAP, XXXXXXX, XXXXXXX,   AU_OFF,   AU_ON,   XXXXXXX,
+      XXXXXXX, XXXXXXX, XXXXXXX,   COLEMAK,   XXXXXXX,  XXXXXXX, XXXXXXX, TERM_ON, TERM_OFF,  MU_OFF,   MU_ON,   XXXXXXX,
+      PLOVER,  XXXXXXX, XXXXXXX,   XXXXXXX,   _______,  XXXXXXX, XXXXXXX, _______, XXXXXXX,   MUV_DE,   MUV_IN,  XXXXXXX
+  ),
+
+
+  /* Colemak
+  * ,-----------------------------------------------------------------------------------.
+  * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_COLEMAK] = LAYOUT_planck_grid(
+      KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+      KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MT(MOD_LSFT, KC_ENT),
+      BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+
+
+  /* Dvorak
+  * ,-----------------------------------------------------------------------------------.
+  * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_DVORAK] = LAYOUT_planck_grid(
+      KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+      KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+      KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    MT(MOD_LSFT, KC_ENT),
+      BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+
+
+  /* Plover layer (http://opensteno.org)
+  * ,-----------------------------------------------------------------------------------.
+  * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+  * `-----------------------------------------------------------------------------------'
+  */
+
+  [_PLOVER] = LAYOUT_planck_grid(
+      KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,
+      XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,
+      XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+      EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX
+  ),   
+};
+
+#ifdef AUDIO_ENABLE
+  float plover_song[][2]     = SONG(PLOVER_SOUND);
+  float plover_gb_song[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+#endif
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return true;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return true;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return true;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+        #ifdef KEYBOARD_planck_rev5
+          writePinLow(E6);
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+        #ifdef KEYBOARD_planck_rev5
+          writePinHigh(E6);
+        #endif
+      }
+      return true;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_SONG(plover_song);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return true;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return true;
+  }
+  return true;
+}
+
+bool muse_mode = false;
+uint8_t last_muse_note = 0;
+uint16_t muse_counter = 0;
+uint8_t muse_offset = 70;
+uint16_t muse_tempo = 50;
+
+void encoder_update(bool clockwise) {
+  if (muse_mode) {
+    if (IS_LAYER_ON(_RAISE)) {
+      if (clockwise) {
+        muse_offset++;
+      } else {
+        muse_offset--;
+      }
+    } else {
+      if (clockwise) {
+        muse_tempo+=1;
+      } else {
+        muse_tempo-=1;
+      }
+    }
+  } else {
+    if (clockwise) {
+      tap_code(KC_PGDN);
+    } else {
+      tap_code(KC_PGUP);
+    }
+  }
+}
+
+void dip_update(uint8_t index, bool active) {
+  switch (index) {
+    case 0:
+      if (active) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_song);
+        #endif
+        layer_on(_ADJUST);
+      } else {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_ADJUST);
+      }
+      break;
+    case 1:
+      if (active) {
+        muse_mode = true;
+      } else {
+        muse_mode = false;
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+        #endif
+      }
+   }
+}
+
+void matrix_scan_user(void) {
+  #ifdef AUDIO_ENABLE
+    if (muse_mode) {
+      if (muse_counter == 0) {
+        uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()];
+        if (muse_note != last_muse_note) {
+          stop_note(compute_freq_for_midi_note(last_muse_note));
+          play_note(compute_freq_for_midi_note(muse_note), 0xF);
+          last_muse_note = muse_note;
+        }
+      }
+      muse_counter = (muse_counter + 1) % muse_tempo;
+    }
+  #endif
+}
+
+bool music_mask_user(uint16_t keycode) {
+  switch (keycode) {
+    case RAISE:
+    case LOWER:
+      return false;
+    default:
+      return true;
+  }
+}

keyboards/planck/keymaps/smittey/readme.md

@@ -0,0 +1,28 @@
+# Planck Layout created by [Smittey](https://github.com/smittey) 
+
+A layout with a focus around coding, utilising the home row for symbols. There is an additional FN layer and Space function layer
+
+Main - Qwerty with ctrl swapped around and enter changed to be shift on hold
+Lower - Numbers and calculations
+Raise - Symbols
+Adjust - Keyboard settings and layout changers
+FN - Function keys
+Space FN - Navigation and media
+
+## Main
+![Main layer layout](https://i.imgur.com/jRbqGUN.png)
+
+## Lower
+![Lower layer layout](https://i.imgur.com/YmdM1q5.png)
+  
+## Raise
+![Raise layer layout](https://i.imgur.com/BXxOK1S.png)
+
+## Adjust
+![Adjust layer layout](https://i.imgur.com/M6qBaXO.png)
+
+## FN
+![FN layer layout](https://i.imgur.com/1eiUOH1.png)
+
+## Space Function
+![Space function layer layout](https://i.imgur.com/RJMFEdy.png)

keyboards/planck/keymaps/smittey/rules.mk

@@ -0,0 +1 @@
+SRC += muse.c

keyboards/redox/keymaps/KL1RL/config.h

@@ -0,0 +1,34 @@
+/*
+Copyright 2018 Mattia Dal Ben <matthewdibi@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+// #define USE_SERIAL
+#define USE_I2C
+
+/* Select hand configuration */
+//#define MASTER_LEFT
+//#define MASTER_RIGHT
+#define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8

keyboards/redox/keymaps/KL1RL/keymap.c

@@ -0,0 +1,90 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _SYMB 1
+#define _NAV 2
+#define _ADJUST 3
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  SYMB,
+  NAV,
+  ADJUST,
+};
+
+// Shortcut to make keymap more readable
+#define SYM_L   MO(_SYMB)
+
+#define KC_ALAS LALT_T(KC_PAST)
+#define KC_CTES LCTL_T(KC_ESC)
+#define KC_CTQU RCTL_T(KC_QUOT)
+
+#define KC_NAGR LT(_NAV, KC_GRV)
+#define KC_NAMI LT(_NAV, KC_MINS)
+
+#define KC_ADEN LT(_ADJUST, KC_END)
+#define KC_ADPU LT(_ADJUST, KC_PGUP)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_NAGR ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,                                            KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_NAMI ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_TAB  ,KC_Q    ,KC_W    ,KC_E    ,KC_R    ,KC_T    ,SYM_L   ,                          SYM_L   ,KC_Y    ,KC_U    ,KC_I    ,KC_O    ,KC_P    ,KC_EQL  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_CTES ,KC_A    ,KC_S    ,KC_D    ,KC_F    ,KC_G    ,KC_LBRC ,                          KC_RBRC ,KC_H    ,KC_J    ,KC_K    ,KC_L    ,KC_SCLN ,KC_QUOTE ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_LSFT ,KC_Z    ,KC_X    ,KC_C    ,KC_V    ,KC_B    ,KC_ADPU ,KC_PGDN ,        KC_HOME ,KC_ADEN ,KC_N    ,KC_M    ,KC_COMM ,KC_DOT  ,KC_SLSH ,KC_RSFT ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+     KC_BSLS ,KC_PPLS ,KC_PMNS ,KC_ALAS ,     KC_LGUI ,    KC_BSPC ,KC_DEL  ,        KC_ENT  ,KC_SPC  ,    KC_RALT ,     KC_LEFT ,KC_DOWN ,KC_UP   ,KC_RGHT
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+
+  [_SYMB] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     _______ ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,                                            KC_F8   ,KC_F9   ,KC_F10  ,KC_F11  ,KC_F12  ,_______ ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______ ,KC_EXLM ,KC_AT   ,KC_LCBR ,KC_RCBR ,KC_PIPE ,KC_F6   ,                          KC_F7   ,XXXXXXX ,KC_KP_7 ,KC_KP_8 ,KC_KP_9 ,XXXXXXX ,_______ ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______ ,KC_HASH ,KC_DLR  ,KC_LBRC ,KC_RBRC ,KC_GRV  ,_______ ,                          _______ ,XXXXXXX ,KC_KP_4 ,KC_KP_5 ,KC_KP_6 ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______ ,KC_PERC ,KC_CIRC ,KC_LPRN ,KC_RPRN ,KC_TILD ,_______ ,_______ ,        _______ ,_______ ,XXXXXXX ,KC_KP_1 ,KC_KP_2 ,KC_KP_3 ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+     _______ ,_______ ,_______ ,_______ ,     _______ ,    _______ ,_______ ,        _______ ,_______ ,    KC_KP_0 ,     KC_KP_0 ,KC_PDOT ,XXXXXXX ,XXXXXXX
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+
+  [_NAV] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                                            _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,_______ ,                          _______ ,XXXXXXX ,XXXXXXX ,KC_WH_U ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,_______ ,                          _______ ,KC_MS_L ,KC_MS_D ,KC_MS_U ,KC_MS_R ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,_______ ,_______ ,        _______ ,XXXXXXX ,XXXXXXX ,XXXXXXX ,KC_WH_D ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,     KC_BTN1 ,    KC_BTN2 ,KC_BTN3 ,        KC_BTN3 ,KC_BTN2 ,    KC_BTN1 ,     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+
+  [_ADJUST] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     XXXXXXX ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,                                            KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,KC_F11  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,RESET   ,RGB_M_P ,RGB_TOG ,RGB_MOD ,RGB_HUD ,RGB_HUI ,                          RGB_SAD ,RGB_SAI ,RGB_VAD ,RGB_VAI ,XXXXXXX ,XXXXXXX ,KC_F12  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,_______ ,XXXXXXX ,        XXXXXXX ,_______ ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,     KC_MUTE ,    KC_VOLD ,KC_VOLU  ,        KC_BRID ,KC_BRIU ,    XXXXXXX ,     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  )
+
+};

keyboards/redox/keymaps/KL1RL/readme.md

@@ -0,0 +1,22 @@
+# A tweaked keymap for Redox
+
+I copied fculpo's layout and made a few modifcations more suited for my own needs. In general it seems to be a fairly straight foward adaptation
+of a standard QWERTY full size keyboard.  At least for me.
+
+![fculpo Layout Image](https://i.imgur.com/OXT8boJ.png)
+
+## Changes to the default keymap
+
+Keymap changes from the default keymap are:
+
+- Move `GUI` (`SUPER`) key to where default left `CTRL` is
+- Move `/?` into usual location next to right `SHIFT` - the default flash from Falbatech put `\|` here (might not be the Redox default?), which felt unintuitive
+- Put `\|` into bottom-left spot where `GUI` (`SUPER`) was - had to go somewhere and this bottom-left placement sort of balances with the almost bottom-right `/?`
+- Change default `ESC` into `ESC` on tap, `CTRL` on hold - for the love of the UNIX-ey `CTRL` key location and to keep `ESC` in the original position
+- Add `F11` and `F12` keys to two layers - needed on macOS if you want to control volume up and down from your keyboard (not shown, on a different layer)S
+- Access ADJUST layer by holding either `END` or `PAGEUP` off default layer.
+
+Changes by KL1RL are:
+- Remove the right hand `CTRL` combo key, it was bugging me.
+- Add Brightness Up and Brightness Down on the right hand thumb cluster on the ADJUST layer.
+- Add Mute, Vol Down and Vol Up on LH thumb cluster also on the ADJUST layer.

keyboards/redox/keymaps/KL1RL/rules.mk

@@ -0,0 +1,2 @@
+RGBLIGHT_ENABLE = yes
+

keyboards/thevankeyboards/minivan/keymaps/tominabox1/keymap.c

@@ -0,0 +1,74 @@
+#include QMK_KEYBOARD_H
+#include "tominabox1.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /*
+    *  |GESC| Q  | W  | F  | P  | G  | J  | L  | U  | Y  | ;  | BSPC |
+    *  | TAB | A  | R  | S  | T  | D  | H  | N  | E  | I  | O  | '   |
+    *  |SHIFT | Z  | X  | C  | V  | B  | K  | M  | ,  | UP  | . | /  |
+    *  |CTRL | WIN   | ALT |   ENTR   |  SPACE | LFT  |DOWN|RGHT|FKEY|
+    */
+
+    [_BASE] = LAYOUT_arrow_wrapper(
+      __________________MINIVAN1_________________,
+      __________________MINIVAN2_________________,
+      __________________MINIVAN3_________________,
+      __________________MINIVAN4_________________
+    ),
+
+    /*
+    *  | ~  | !  | @  | #  | $  | %  | ^  | &  | *  | (  | )  | DEL  |
+    *  |     |    |    |    |    |    |    |  _ |  + |  { |  } | PIPE|
+    *  |SHIFT |    |    |    |    |    |    |    |PGDN| UP  | ? | /  |
+    *  |CTRL | WIN   | ALT |   ENTR   |  SPACE | LFT  |DOWN|RGHT|FKEY|
+    */
+
+    [_LOWER] = LAYOUT_arrow_wrapper(
+      _________________LOWER_1___________________,
+      _________________LOWER_2___________________,
+      __________________MININUM3_________________,
+      __________________MININUM4_________________
+    ),
+
+    /*
+    *  | `  | 1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | 0  | BSPC |
+    *  | INS |    |    |    |    |    |    |  - |  = |  [ |  ] |  \  |
+    *  |      |    |    |    |    |    |    |    |    |    |  / |    |
+    *  |CTRL | WIN   | ALT |   ENTR   |  SPACE | LFT  |DOWN|RGHT|FKEY|
+    */
+
+    [_RAISE] = LAYOUT_arrow_wrapper(
+      ___________________RAISE1__________________,
+      ___________________RAISE2__________________,
+      ___________________RVAN_3__________________,
+      ___________________RVAN_4__________________
+    ),
+
+    /*
+     *  |REST|EERS|    |    |    |    |    |    |    |    |    |      |
+     *  |     |    |    |    |    |    |    |    |    |    |    |     |
+     *  |      |    |    |    |    |    |    |    |    |    |    |    |
+     *  |     |       |     |   ENTR   |  SPACE |      |    |    |    |
+     */
+
+    [_ADJUST] = LAYOUT_arrow_wrapper(
+      ___________________ADJST1__________________,
+      ___________________ADJST2__________________,
+      ___________________ADJVAN3_________________,
+      ___________________ADJVAN4_________________
+    ),
+
+    /*
+     *  |    | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10|      |
+     *  |     |    |    |    |    |    |    |    |    |F11 | F12|     |
+     *  |      |    |    |    |    |    |    |    |    |    |    |    |
+     *  |     |       |     |          |        | FKEY |    |    |    |
+     */
+
+    [_FKEY] = LAYOUT_arrow_wrapper(
+      ___________________FKEY1___________________,
+      ___________________FKEY2___________________,
+      ___________________FVAN_3__________________,
+      ___________________FVAN_4__________________
+    ),
+  };

keyboards/vitamins_included/i2c.c

@@ -1,163 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-#ifdef USE_I2C
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-
-  // easier way, but will wait slightly longer
-  // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz
-void i2c_master_init(void) {
-  // no prescaler
-  TWSR = 0;
-  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
-  // Check datasheets for more info.
-  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-//          1 => error
-uint8_t i2c_master_start(uint8_t address) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
-
-  i2c_delay();
-
-  // check that we started successfully
-  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
-    return 1;
-
-  TWDR = address;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
-    return 1; // slave did not acknowledge
-  else
-    return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-//         1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
-  TWDR = data;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  // check if the slave acknowledged us
-  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
-  i2c_delay();
-  return TWDR;
-}
-
-void i2c_reset_state(void) {
-  TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
-  TWAR = address << 0; // slave i2c address
-  // TWEN  - twi enable
-  // TWEA  - enable address acknowledgement
-  // TWINT - twi interrupt flag
-  // TWIE  - enable the twi interrupt
-  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
-  uint8_t ack = 1;
-  switch(TW_STATUS) {
-    case TW_SR_SLA_ACK:
-      // this device has been addressed as a slave receiver
-      slave_has_register_set = false;
-      break;
-
-    case TW_SR_DATA_ACK:
-      // this device has received data as a slave receiver
-      // The first byte that we receive in this transaction sets the location
-      // of the read/write location of the slaves memory that it exposes over
-      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
-      // slave_buffer_pos after each write.
-      if(!slave_has_register_set) {
-        slave_buffer_pos = TWDR;
-        // don't acknowledge the master if this memory loctaion is out of bounds
-        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
-          ack = 0;
-          slave_buffer_pos = 0;
-        }
-        slave_has_register_set = true;
-      } else {
-        i2c_slave_buffer[slave_buffer_pos] = TWDR;
-        BUFFER_POS_INC();
-      }
-      break;
-
-    case TW_ST_SLA_ACK:
-    case TW_ST_DATA_ACK:
-      // master has addressed this device as a slave transmitter and is
-      // requesting data.
-      TWDR = i2c_slave_buffer[slave_buffer_pos];
-      BUFFER_POS_INC();
-      break;
-
-    case TW_BUS_ERROR: // something went wrong, reset twi state
-      TWCR = 0;
-    default:
-      break;
-  }
-  // Reset everything, so we are ready for the next TWI interrupt
-  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-  contacted_by_master = true;
-}
-#endif

keyboards/vitamins_included/i2c.h

@@ -1,50 +0,0 @@
-#ifndef I2C_H
-#define I2C_H
-
-#include <stdint.h>
-#include "split_util.h"
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency
-#define SCL_CLOCK  100000UL
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
-
-#endif

keyboards/vitamins_included/matrix.c

@@ -1,503 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "pro_micro.h"
-#include "config.h"
-#include "timer.h"
-#include <print.h>
-
-#if (defined(RGB_MIDI) | defined(RGBLIGHT_ANIMATIONS)) & defined(RGBLIGHT_ENABLE)
-    #include "rgblight.h"
-#endif
-
-
-#ifdef USE_I2C
-#  include "i2c.h"
-#else // USE_SERIAL
-#  include "serial.h"
-#endif
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE 5
-#endif
-
-#if (DEBOUNCE > 0)
-    static uint16_t debouncing_time;
-    static bool debouncing = false;
-#endif
-
-#if (MATRIX_COLS <= 8)
-#    define print_matrix_header()  print("\nr/c 01234567\n")
-#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop(matrix[i])
-#    define ROW_SHIFTER ((uint8_t)1)
-#else
-#    error "Currently only supports 8 COLS"
-#endif
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-#define ERROR_DISCONNECT_COUNT 5
-
-#define ROWS_PER_HAND (MATRIX_ROWS/2)
-
-static uint8_t error_count = 0;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-#if (DIODE_DIRECTION == COL2ROW)
-    static void init_cols(void);
-    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
-    static void unselect_rows(void);
-    static void select_row(uint8_t row);
-    static void unselect_row(uint8_t row);
-#elif (DIODE_DIRECTION == ROW2COL)
-    static void init_rows(void);
-    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
-    static void unselect_cols(void);
-    static void unselect_col(uint8_t col);
-    static void select_col(uint8_t col);
-#endif
-
-
-__attribute__ ((weak))
-void matrix_init_quantum(void) {
-    matrix_init_kb();
-}
-
-__attribute__ ((weak))
-void matrix_scan_quantum(void) {
-    matrix_scan_kb();
-}
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
-    return MATRIX_COLS;
-}
-
-bool has_usb(void) {
-    return UDADDR & _BV(ADDEN); // This will return true if a USB connection has been established
-}
-
-void matrix_init(void)
-{
-    // initialize row and col
-#if (DIODE_DIRECTION == COL2ROW)
-    unselect_rows();
-    init_cols();
-#elif (DIODE_DIRECTION == ROW2COL)
-    unselect_cols();
-    init_rows();
-#endif
-
-  TX_RX_LED_INIT;
-
-  // initialize matrix state: all keys off
-  for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-    matrix[i] = 0;
-    matrix_debouncing[i] = 0;
-  }
-
-  #ifdef RGBLIGHT_ENABLE
-    rgblight_init();
-  #endif
-
-  timer_init();
-  #ifdef USE_I2C
-    i2c_slave_init(SLAVE_I2C_ADDRESS);
-  #else
-    serial_slave_init();
-  #endif
-
-  sei();
-
-  matrix_init_quantum();
-  while(!has_usb() || contacted_by_master){
-    matrix_slave_scan();
-  }
-
-  // Set up as master
-  #ifdef USE_I2C
-    i2c_reset_state();
-    i2c_master_init();
-  #else
-    serial_master_init();
-  #endif
-}
-
-uint8_t _matrix_scan(void)
-{
-    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-#if (DIODE_DIRECTION == COL2ROW)
-    // Set row, read cols
-    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
-#       if (DEBOUNCE > 0)
-            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
-
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-
-#       else
-            read_cols_on_row(matrix+offset, current_row);
-#       endif
-
-    }
-
-#elif (DIODE_DIRECTION == ROW2COL)
-    // Set col, read rows
-    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
-#       if (DEBOUNCE > 0)
-            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-#       else
-             read_rows_on_col(matrix+offset, current_col);
-#       endif
-
-    }
-#endif
-
-#   if (DEBOUNCE > 0)
-        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) {
-            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-                matrix[i+offset] = matrix_debouncing[i+offset];
-            }
-            debouncing = false;
-        }
-#   endif
-
-    return 1;
-}
-
-#ifdef USE_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
-    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-    if (err) goto i2c_error;
-
-    // start of matrix stored at 0x00
-    err = i2c_master_write(0x00);
-    if (err) goto i2c_error;
-
-    // Start read
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
-    if (err) goto i2c_error;
-
-    if (!err) {
-        int i;
-        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
-            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
-        }
-        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
-        i2c_master_stop();
-    } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
-        i2c_reset_state();
-        return err;
-    }
-
-    return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
-    if (serial_update_buffers()) {
-        return 1;
-    }
-
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        matrix[slaveOffset+i] = serial_slave_buffer[i];
-    }
-    return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
-    uint8_t ret = _matrix_scan();
-
-#ifdef USE_I2C
-    if( i2c_transaction() ) {
-#else // USE_SERIAL
-    if( serial_transaction() ) {
-#endif
-        // turn on the indicator led when halves are disconnected
-        TXLED1;
-
-        error_count++;
-
-        if (error_count > ERROR_DISCONNECT_COUNT) {
-            // reset other half if disconnected
-            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-            for (int i = 0; i < ROWS_PER_HAND; ++i) {
-                matrix[slaveOffset+i] = 0;
-            }
-        }
-    } else {
-        // turn off the indicator led on no error
-        TXLED0;
-        error_count = 0;
-    }
-    matrix_scan_quantum();
-    return ret;
-}
-
-void matrix_slave_scan(void) {
-  #if defined(RGBLIGHT_ANIMATIONS) & defined(RGBLIGHT_ENABLE)
-    rgblight_task();
-  #endif
-  _matrix_scan();
-
-  int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_I2C
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        i2c_slave_buffer[i] = matrix[offset+i];
-    }
-#else // USE_SERIAL
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        serial_slave_buffer[i] = matrix[offset+i];
-    }
-#endif
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
-    }
-    return count;
-}
-
-#if (DIODE_DIRECTION == COL2ROW)
-
-static void init_cols(void)
-{
-    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
-        uint8_t pin = col_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
-{
-    // Store last value of row prior to reading
-    matrix_row_t last_row_value = current_matrix[current_row];
-
-    // Clear data in matrix row
-    current_matrix[current_row] = 0;
-
-    // Select row and wait for row selecton to stabilize
-    select_row(current_row);
-    wait_us(30);
-
-    // For each col...
-    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
-
-        // Select the col pin to read (active low)
-        uint8_t pin = col_pins[col_index];
-        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
-
-        // Populate the matrix row with the state of the col pin
-        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
-    }
-
-    // Unselect row
-    unselect_row(current_row);
-
-    return (last_row_value != current_matrix[current_row]);
-}
-
-static void select_row(uint8_t row)
-{
-    uint8_t pin = row_pins[row];
-    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
-    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
-}
-
-static void unselect_row(uint8_t row)
-{
-    uint8_t pin = row_pins[row];
-    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-}
-
-static void unselect_rows(void)
-{
-    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-        uint8_t pin = row_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-#elif (DIODE_DIRECTION == ROW2COL)
-
-static void init_rows(void)
-{
-    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-        uint8_t pin = row_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
-{
-    bool matrix_changed = false;
-
-    // Select col and wait for col selecton to stabilize
-    select_col(current_col);
-    wait_us(30);
-
-    // For each row...
-    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
-    {
-
-        // Store last value of row prior to reading
-        matrix_row_t last_row_value = current_matrix[row_index];
-
-        // Check row pin state
-        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
-        {
-            // Pin LO, set col bit
-            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
-        }
-        else
-        {
-            // Pin HI, clear col bit
-            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
-        }
-
-        // Determine if the matrix changed state
-        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
-        {
-            matrix_changed = true;
-        }
-    }
-
-    // Unselect col
-    unselect_col(current_col);
-
-    return matrix_changed;
-}
-
-static void select_col(uint8_t col)
-{
-    uint8_t pin = col_pins[col];
-    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
-    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
-}
-
-static void unselect_col(uint8_t col)
-{
-    uint8_t pin = col_pins[col];
-    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-}
-
-static void unselect_cols(void)
-{
-    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
-        uint8_t pin = col_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-#endif

keyboards/vitamins_included/rev1/config.h

@@ -20,7 +20,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
+#define SPLIT_USB_DETECT
+
 #define EE_HANDS
+#define SOFT_SERIAL_PIN D0
 
 /* USB Device descriptor parameters */
 #define DEVICE_VER      0x0001

keyboards/vitamins_included/rev1/rules.mk

@@ -1,9 +1,2 @@
-SRC += matrix.c \
-	   split_util.c \
-	   ssd1306.c
-
-QUANTUM_LIB_SRC += i2c.c \
-	   serial.c \
-
-CUSTOM_MATRIX = yes
+SPLIT_KEYBOARD = yes
 BOOTLOADER = caterina

keyboards/vitamins_included/serial.c

@@ -1,229 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <stdbool.h>
-#include "serial.h"
-
-#ifndef USE_I2C
-
-// Serial pulse period in microseconds. Its probably a bad idea to lower this
-// value.
-#define SERIAL_DELAY 24
-
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-
-#define SLAVE_DATA_CORRUPT (1<<0)
-volatile uint8_t status = 0;
-
-inline static
-void serial_delay(void) {
-  _delay_us(SERIAL_DELAY);
-}
-
-inline static
-void serial_output(void) {
-  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static
-void serial_input(void) {
-  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
-  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-inline static
-uint8_t serial_read_pin(void) {
-  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
-}
-
-inline static
-void serial_low(void) {
-  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
-}
-
-inline static
-void serial_high(void) {
-  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-void serial_master_init(void) {
-  serial_output();
-  serial_high();
-}
-
-void serial_slave_init(void) {
-  serial_input();
-
-  // Enable INT0
-  EIMSK |= _BV(INT0);
-  // Trigger on falling edge of INT0
-  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
-}
-
-// Used by the master to synchronize timing with the slave.
-static
-void sync_recv(void) {
-  serial_input();
-  // This shouldn't hang if the slave disconnects because the
-  // serial line will float to high if the slave does disconnect.
-  while (!serial_read_pin());
-  serial_delay();
-}
-
-// Used by the slave to send a synchronization signal to the master.
-static
-void sync_send(void) {
-  serial_output();
-
-  serial_low();
-  serial_delay();
-
-  serial_high();
-}
-
-// Reads a byte from the serial line
-static
-uint8_t serial_read_byte(void) {
-  uint8_t byte = 0;
-  serial_input();
-  for ( uint8_t i = 0; i < 8; ++i) {
-    byte = (byte << 1) | serial_read_pin();
-    serial_delay();
-    _delay_us(1);
-  }
-
-  return byte;
-}
-
-// Sends a byte with MSB ordering
-static
-void serial_write_byte(uint8_t data) {
-  uint8_t b = 8;
-  serial_output();
-  while( b-- ) {
-    if(data & (1 << b)) {
-      serial_high();
-    } else {
-      serial_low();
-    }
-    serial_delay();
-  }
-}
-
-// interrupt handle to be used by the slave device
-ISR(SERIAL_PIN_INTERRUPT) {
-  sync_send();
-
-  uint8_t checksum = 0;
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
-    serial_write_byte(serial_slave_buffer[i]);
-    sync_send();
-    checksum += serial_slave_buffer[i];
-  }
-  serial_write_byte(checksum);
-  sync_send();
-
-  // wait for the sync to finish sending
-  serial_delay();
-
-  // read the middle of pulses
-  _delay_us(SERIAL_DELAY/2);
-
-  uint8_t checksum_computed = 0;
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
-    serial_master_buffer[i] = serial_read_byte();
-    sync_send();
-    checksum_computed += serial_master_buffer[i];
-  }
-  uint8_t checksum_received = serial_read_byte();
-  sync_send();
-
-  serial_input(); // end transaction
-
-  if ( checksum_computed != checksum_received ) {
-    status |= SLAVE_DATA_CORRUPT;
-  } else {
-    status &= ~SLAVE_DATA_CORRUPT;
-  }
-  contacted_by_master = true;
-}
-
-inline
-bool serial_slave_DATA_CORRUPT(void) {
-  return status & SLAVE_DATA_CORRUPT;
-}
-
-// Copies the serial_slave_buffer to the master and sends the
-// serial_master_buffer to the slave.
-//
-// Returns:
-// 0 => no error
-// 1 => slave did not respond
-int serial_update_buffers(void) {
-  // this code is very time dependent, so we need to disable interrupts
-  cli();
-
-  // signal to the slave that we want to start a transaction
-  serial_output();
-  serial_low();
-  _delay_us(1);
-
-  // wait for the slaves response
-  serial_input();
-  serial_high();
-  _delay_us(SERIAL_DELAY);
-
-  // check if the slave is present
-  if (serial_read_pin()) {
-    // slave failed to pull the line low, assume not present
-    sei();
-    return 1;
-  }
-
-  // if the slave is present syncronize with it
-  sync_recv();
-
-  uint8_t checksum_computed = 0;
-  // receive data from the slave
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
-    serial_slave_buffer[i] = serial_read_byte();
-    sync_recv();
-    checksum_computed += serial_slave_buffer[i];
-  }
-  uint8_t checksum_received = serial_read_byte();
-  sync_recv();
-
-  if (checksum_computed != checksum_received) {
-    sei();
-    return 1;
-  }
-
-  uint8_t checksum = 0;
-  // send data to the slave
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
-    serial_write_byte(serial_master_buffer[i]);
-    sync_recv();
-    checksum += serial_master_buffer[i];
-  }
-  serial_write_byte(checksum);
-  sync_recv();
-
-  // always, release the line when not in use
-  serial_output();
-  serial_high();
-
-  sei();
-  return 0;
-}
-
-#endif

keyboards/vitamins_included/serial.h

@@ -1,25 +0,0 @@
-#pragma once
-
-#include "config.h"
-#include <stdbool.h>
-#include "split_util.h"
-
-/* TODO:  some defines for interrupt setup */
-#define SERIAL_PIN_DDR DDRD
-#define SERIAL_PIN_PORT PORTD
-#define SERIAL_PIN_INPUT PIND
-#define SERIAL_PIN_MASK _BV(PD0)
-#define SERIAL_PIN_INTERRUPT INT0_vect
-
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH 1
-
-// Buffers for master - slave communication
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(void);
-bool serial_slave_data_corrupt(void);
-

keyboards/vitamins_included/split_util.c

@@ -1,28 +0,0 @@
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-#include "config.h"
-#include "timer.h"
-#include "debug.h"
-
-volatile bool isLeftHand = true;
-volatile bool contacted_by_master = false;
-
-bool is_rev2(void) // Input with pullup, if rev2, pin is pulled down with 220R resistor.
-{
-  setPinInputHigh(B5);
-  bool rev2 = !readPin(B5);
-  setPinInput(B5);
-  return rev2;
-}
-
-// this code runs before the usb and keyboard is initialized
-void matrix_setup(void) {
-  isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
-}

keyboards/vitamins_included/split_util.h

@@ -1,16 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include "eeconfig.h"
-#include "quantum.h"
-
-#define SLAVE_I2C_ADDRESS           0x32
-
-extern volatile bool isLeftHand;
-extern volatile bool contacted_by_master;
-
-bool has_usb(void);
-bool is_rev2(void);
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);

lib/python/qmk/cli/doctor.py

@@ -52,10 +52,10 @@ def doctor(cli):
         if shutil.which('systemctl'):
             mm_check = subprocess.run(['systemctl', 'list-unit-files'], stdout=subprocess.PIPE, stderr=subprocess.PIPE, timeout=10, universal_newlines=True)
             if mm_check.returncode == 0:
-                mm = True
+                mm = False
                 for line in mm_check.stdout.split('\n'):
                     if 'ModemManager' in line and 'enabled' in line:
-                        mm = False
+                        mm = True
 
                 if mm:
                     cli.log.warn("{bg_yellow}Detected ModemManager. Please disable it if you are using a Pro-Micro.")

quantum/split_common/split_util.c

@@ -32,6 +32,12 @@ bool waitForUsb(void) {
         }
         wait_ms(100);
     }
+
+#if defined(__AVR__)
+    // Avoid NO_USB_STARTUP_CHECK - Disable USB as the previous checks seem to enable it somehow
+    (USBCON &= ~(_BV(USBE) | _BV(OTGPADE)));
+#endif
+
     return false;
 }
 

quantum/template/avr/rules.mk

@@ -23,10 +23,10 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -34,9 +34,8 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
+MIDI_ENABLE = no            # MIDI support
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

users/tominabox1/.gitignore

@@ -0,0 +1,2 @@
+*.bmp
+*.py

users/tominabox1/config.h

@@ -0,0 +1,80 @@
+#pragma once
+
+// Tapping term settings
+#define TAPPING_TERM_PER_KEY
+#define TAP_HOLD_CAPS_DELAY 350
+#define BOOTMAGIC_KEY_SALT KC_BSPACE
+#define BOOTMAGIC_KEY_EEPROM_CLEAR KC_Q
+
+// OLED settings
+#define OLED_FONT_H "users/tominabox1/doug.c"
+#define OLED_DISABLE_TIMEOUT
+
+#define DEBOUNCE 5
+
+// Setup RGB settings for the Dimple.
+#ifdef KEYBOARD_lazydesigners_dimple
+  #ifdef RGBLIGHT_ENABLE
+    #undef RGBLED_NUM
+    #define RGBLED_NUM 50
+    #define RGBLIGHT_ANIMATIONS
+    #define RGBLIGHT_SLEEP
+  #endif // RGBLIGHT_ENABLE
+
+  #ifdef RGB_MATRIX_ENABLE
+  #undef RGBLED_NUM
+  #define RGBLED_NUM 50
+  #define DRIVER_LED_TOTAL RGBLED_NUM
+  #endif // RGBL_MATRIX_ENABLE
+#endif // KEYBOARD_lazydesigners_dimple
+
+// RGB_Matrix settings
+#ifdef RGB_MATRIX_ENABLE
+  #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+  #define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+  #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
+  #define RGB_MATRIX_HUE_STEP 8
+  #define RGB_MATRIX_SAT_STEP 8
+  #define RGB_MATRIX_VAL_STEP 8
+  #define RGB_MATRIX_SPD_STEP 10
+  #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+  /* Disable the animations you don't want/need.  You will need to disable a good number of these
+    because they take up a lot of space.  Disable until you can successfully compile your firmware. */
+  // #define DISABLE_RGB_MATRIX_ALPHAS_MODS
+  // #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+  #define DISABLE_RGB_MATRIX_BREATHING
+  // #define DISABLE_RGB_MATRIX_CYCLE_ALL
+  // #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+  // #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+  // #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
+  // #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+  #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+  #define DISABLE_RGB_MATRIX_DUAL_BEACON
+  #define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+  #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+  // #define DISABLE_RGB_MATRIX_RAINDROPS
+  #define DISABLE_RGB_MATRIX_JELLYBEN_RAINDROPS
+  // # define DISABLE_RGB_MATRIX_TYPING_HEATMAP
+  #define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+  // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+  // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+  // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+  #define DISABLE_RGB_MATRIX_SPLASH
+  #define DISABLE_RGB_MATRIX_MULTISPLASH
+  #define DISABLE_RGB_MATRIX_SOLID_SPLASH
+  #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#endif //RGB_MATRIX_ENABLE
+
+// Hex size reduction options
+#ifndef NO_DEBUG
+  #define NO_DEBUG
+#endif // !NO_DEBUG
+#if !defined(NO_PRINT) && !defined(CONSOLE_ENABLE)
+  #define NO_PRINT
+#endif // !NO_PRINT
+#define NO_ACTION_ONESHOT

users/tominabox1/dimple_rgb.c

@@ -0,0 +1,433 @@
+#include "dz60rgb.h"
+#include "config.h"
+#if defined (dzrgb60_iso)
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+    {0, K_14,   J_14,   L_14},
+    {0, K_13,   J_13,   L_13},
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+    {0, H_15,   G_15,   I_15},
+    {0, H_13,   G_13,   I_13},
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+    {0, B_14,   A_14,   C_14},
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+    {0, B_13,   A_13,   C_13},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_7,    A_7,    C_7},
+    {0, B_6,    A_6,    C_6},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1},
+    {0, B_15,   A_15,   C_15},
+    {0, E_13,   D_13,   F_13},
+    {0, B_12,   A_12,   C_12},
+    {0, E_15,   D_15,   F_15},
+    {0, B_16,   A_16,   C_16},
+    {0, E_16,   D_16,   F_16},
+    {0, H_16,   G_16,   I_16},
+    {0, K_16,   J_16,   L_16},
+};
+
+led_config_t g_led_config = { {
+    {  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  28 },
+    {  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29, NO_LED,  14 },
+    {  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42,  41, NO_LED, NO_LED },
+    {  60,  59,  58, NO_LED, NO_LED,  57, NO_LED, NO_LED, NO_LED,  56,  55,  54, NO_LED,  53 }
+}, {
+    { 216,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 }, {   0,   0 },
+    { 220,  24 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 }, {   4,  16 },
+    { 204,  32 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 }, { 210,  48 },
+    { 180,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  20,  48 }, {  10,  48 }, { 222,  64 }, { 202,  64 }, { 182,  64 },
+    { 162,  64 }, { 102,  64 }, {  42,  64 }, {  22,  64 }, {   2,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1,
+    1, 4, 1, 1, 1
+} };
+
+#elif defined (dzrgb60_hhkb)
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+	{0, H_15,   G_15,   I_15},
+    {0, K_14,   J_14,   L_14},
+    {0, K_13,   J_13,   L_13},
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+    {0, H_14,   G_14,   I_14},
+    {0, H_13,   G_13,   I_13},
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+    {0, E_14,   D_14,   F_14},
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+    {0, B_14,   A_14,   C_14},
+    {0, B_13,   A_13,   C_13},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_7,    A_7,    C_7},
+    {0, B_6,    A_6,    C_6},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1},
+    {0, B_15,   A_15,   C_15},
+    {0, E_13,   D_13,   F_13},
+    {0, B_12,   A_12,   C_12},
+    {0, B_16,   A_16,   C_16},
+    {0, E_16,   D_16,   F_16},
+    {0, H_16,   G_16,   I_16},
+    {0, K_16,   J_16,   L_16},
+};
+
+led_config_t g_led_config = { {
+    {  14,  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1 },
+    {  28,  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15 },
+    {  41,  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,   0,  29 },
+    {  54,  53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43, NO_LED,  42 },
+    {  61,  60,  59, NO_LED, NO_LED,  58, NO_LED, NO_LED, NO_LED, NO_LED,  57,  56, NO_LED,  55 }
+}, {
+    { 224,   0 }, { 208,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 },
+    {   0,   0 }, { 220,  16 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 },
+    {   4,  16 }, { 204,  32 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 },
+    { 224,  48 }, { 202,  48 }, { 180,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  20,  48 }, {  10,  48 }, { 218,  64 },
+    { 198,  64 }, { 178,  64 }, { 112,  64 }, {  46,  64 }, {  26,  64 }, {   6,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    1, 1, 4, 1, 1, 1
+} };
+
+#elif defined (dzrgb60_hhkb_iso)
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+	{0, H_15,   G_15,   I_15},
+    {0, K_14,   J_14,   L_14},
+    {0, K_13,   J_13,   L_13},
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+    {0, K_15,   J_15,   L_15},
+    {0, H_13,   G_13,   I_13},
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+    {0, E_15,   D_15,   F_15},
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+    {0, B_14,   A_14,   C_14},
+    {0, B_13,   A_13,   C_13},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_7,    A_7,    C_7},
+    {0, B_6,    A_6,    C_6},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1},
+    {0, B_15,   A_15,   C_15},
+    {0, E_13,   D_13,   F_13},
+    {0, B_12,   A_12,   C_12},
+    {0, B_16,   A_16,   C_16},
+    {0, E_16,   D_16,   F_16},
+    {0, H_16,   G_16,   I_16},
+    {0, K_16,   J_16,   L_16},
+};
+
+led_config_t g_led_config = { {
+    {  14,  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1 },
+    {  28,  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  29 },
+    {  41,  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,   0,  15 },
+    {  54,  53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43, NO_LED,  42 },
+    {  61,  60,  59, NO_LED, NO_LED,  58, NO_LED, NO_LED, NO_LED, NO_LED,  57,  56, NO_LED,  55 }
+}, {
+    { 224,   0 }, { 208,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 },
+    {   0,   0 }, { 220,  24 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 },
+    {   4,  16 }, { 204,  32 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 },
+    { 224,  48 }, { 202,  48 }, { 180,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  20,  48 }, {  10,  48 }, { 218,  64 },
+    { 198,  64 }, { 178,  64 }, { 112,  64 }, {  46,  64 }, {  26,  64 }, {   6,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    1, 1, 4, 1, 1, 1
+} };
+
+#elif defined (dzrgb60_ansi)
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+    {0, K_14,   J_14,   L_14},
+    {0, K_13,   J_13,   L_13},
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+    {0, H_14,   G_14,   I_14},
+    {0, H_13,   G_13,   I_13},
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+    {0, E_14,   D_14,   F_14},
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+    {0, B_13,   A_13,   C_13},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_7,    A_7,    C_7},
+    {0, B_6,    A_6,    C_6},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1},
+    {0, B_15,   A_15,   C_15},
+    {0, E_13,   D_13,   F_13},
+    {0, B_12,   A_12,   C_12},
+    {0, E_15,   D_15,   F_15},
+    {0, B_16,   A_16,   C_16},
+    {0, E_16,   D_16,   F_16},
+    {0, H_16,   G_16,   I_16},
+    {0, K_16,   J_16,   L_16},
+};
+
+led_config_t g_led_config = { {
+    {  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  14 },
+    {  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29, NO_LED,  28 },
+    {  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42,  41, NO_LED, NO_LED },
+    {  60,  59,  58, NO_LED, NO_LED,  57, NO_LED, NO_LED, NO_LED,  56,  55,  54, NO_LED,  53 }
+}, {
+    { 216,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 }, {   0,   0 },
+    { 220,  16 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 }, {   4,  16 },
+    { 214,  24 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 }, { 210,  48 },
+    { 180,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  20,  48 }, {  10,  48 }, { 222,  64 }, { 202,  64 }, { 182,  64 },
+    { 162,  64 }, { 102,  64 }, {  42,  64 }, {  22,  64 }, {   2,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1,
+    1, 4, 1, 1, 1
+} };
+
+#else
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+    {0, K_14,   J_14,   L_14},
+    {0, K_13,   J_13,   L_13},
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+    {0, H_14,   G_14,   I_14},
+    {0, H_13,   G_13,   I_13},
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+    {0, E_14,   D_14,   F_14},
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+    {0, B_14,   A_14,   C_14},
+    {0, B_13,   A_13,   C_13},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_7,    A_7,    C_7},
+    {0, B_6,    A_6,    C_6},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1},
+    {0, B_15,   A_15,   C_15},
+    {0, E_13,   D_13,   F_13},
+    {0, B_12,   A_12,   C_12},
+    {0, E_15,   D_15,   F_15},
+    {0, H_15,   G_15,   I_15},
+    {0, B_16,   A_16,   C_16},
+    {0, E_16,   D_16,   F_16},
+    {0, H_16,   G_16,   I_16},
+    {0, K_16,   J_16,   L_16},
+};
+
+led_config_t g_led_config = { {
+    {  13,  12,  11,  10,   9,   8,   7,   6,   5,   4,   3,   2,   1,   0 },
+    {  27,  26,  25,  24,  23,  22,  21,  20,  19,  18,  17,  16,  15,  14 },
+    {  40,  39,  38,  37,  36,  35,  34,  33,  32,  31,  30,  29, NO_LED,  28 },
+    {  53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42, NO_LED,  41 },
+    {  62,  61,  60, NO_LED, NO_LED,  59, NO_LED, NO_LED,  58,  57,  56,  55, NO_LED,  54 }
+}, {
+    { 216,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 }, {   0,   0 },
+    { 220,  16 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 }, {   4,  16 },
+    { 214,  32 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 }, { 224,  48 },
+    { 208,  48 }, { 186,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  36,  48 }, {   9,  48 }, { 224,  64 }, { 208,  64 },
+    { 192,  64 }, { 176,  64 }, { 160,  64 }, { 102,  64 }, {  42,  64 }, {  22,  64 }, {   2,  64 }
+}, {
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1,
+    1, 1, 1, 4, 1, 1, 1
+} };
+
+
+#endif

users/tominabox1/doug.c

@@ -0,0 +1,243 @@
+// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
+// See gfxfont.h for newer custom bitmap font info.
+
+#ifndef FONT5X7_H
+#define FONT5X7_H
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#elif defined(ESP8266)
+ #include <pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+// Standard ASCII 5x7 font
+const unsigned char font[] PROGMEM = {
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
+0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
+0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+0x00, 0x2C, 0x2C, 0x2C, 0x34, 0x34,
+0x34, 0x24, 0x2C, 0x2C, 0x2C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x18, 0x14,
+0x14, 0x3C, 0x20, 0x00, 0x00, 0x04,
+0x0C, 0x00, 0x00, 0x20, 0x00, 0xC0,
+0x00, 0x00, 0x00, 0xA0, 0x20, 0x30,
+0x7C, 0x78, 0x0C, 0x0C, 0x18, 0x18,
+0x18, 0x14, 0x14, 0x14, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x80, 0x5C, 0x5C, 0x24, 0x20,
+0xA0, 0xA0, 0xA0, 0x20, 0x60, 0x20,
+0xBC, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x14, 0x94, 0x94,
+0x14, 0x94, 0x94, 0x94, 0x94, 0x14,
+0x1C, 0x1C, 0x1C, 0x88, 0x08, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x18, 0x08,
+0x84, 0x84, 0x84, 0x84, 0x80, 0x98,
+0x80, 0x9C, 0x9C, 0x90, 0x80, 0x00,
+0x10, 0x1C, 0x1C, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x10, 0x10, 0x00,
+0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x80, 0x80, 0x40, 0x00, 0x80, 0x80,
+0x00, 0x00, 0x00, 0x00, 0x80, 0x80,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x50, 0xA0, 0x40, 0x80, 0x80, 0x40,
+0xA0, 0x50, 0x00, 0x00, 0xF0, 0x00,
+0x01, 0x08, 0x08, 0x88, 0x08, 0x08,
+0x00, 0x00, 0x00, 0x00, 0x0A, 0x0C,
+0x0E, 0x0A, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x02, 0x82, 0x80, 0x80,
+0x00, 0x00, 0x80, 0x80, 0x00, 0x00,
+0x00, 0xC0, 0x00, 0x00, 0x00, 0x01,
+0x00, 0x00, 0x00, 0x40, 0x00, 0x40,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x03, 0x00,
+0x01, 0x01, 0x01, 0x60, 0x60, 0x40,
+0xF1, 0xB3, 0x03, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x90, 0x90, 0xD0, 0xC0,
+0xE0, 0xE0, 0x00, 0x00, 0x00, 0x01,
+0x00, 0x90, 0xA0, 0xA0, 0x63, 0x60,
+0x40, 0x40, 0xC0, 0x00, 0x00, 0x00,
+0x00, 0x02, 0x02, 0x02, 0x03, 0x00,
+0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x07, 0x06, 0x00, 0x70, 0x10, 0x10,
+0x31, 0x11, 0x16, 0x06, 0x07, 0x01,
+0x00, 0x08, 0x08, 0x08, 0x70, 0x70,
+0x40, 0x40, 0x41, 0x46, 0x46, 0x41,
+0x40, 0x40, 0x00, 0x00, 0x07, 0x00,
+0x00, 0x00, 0x00, 0x75, 0x75, 0x15,
+0x77, 0x77, 0x35, 0x15, 0x75, 0x75,
+0x75, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x70, 0x70, 0x56, 0x56, 0x56,
+0x51, 0x11, 0x26, 0x00, 0x00, 0x00,
+0x00, 0x17, 0x10, 0x10, 0x70, 0x00,
+0x00, 0x00, 0x30, 0x20, 0x27, 0x77,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xE0, 0xE0, 0xA0, 0xA0, 0xA0, 0xA0,
+0xA0, 0xA0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x90, 0x90, 0x90, 0x90,
+0x90, 0xF0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x20, 0x40,
+0xF0, 0x30, 0x10, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+#endif // FONT5X7_H

users/tominabox1/readme.md

@@ -0,0 +1,5 @@
+# Overview
+
+My user-space code covers the [Minivan](../../keyboards/thevankeyboards/minivan/keymaps/tominabox1/keymap.c), [Dimple](../../keyboards/lazydesigners/dimple/keymaps/tominabox1/keymap.c), [CRKBD](../../keyboards/crkbd/keymaps/tominabox1/keymap.c), and [Teensy based HHKB converter](../../keyboards/hhkb/keymaps/tominabox1/). My code makes extensive use of @Drashna's code and much love and praise goes to him for figuring a lot of this stuff out!
+
+My usercode utilizes the layout wrappers contained in [wrappers.h](wrappers.h). All of the keymaps are derivative of the Dimple keymap and utilize its wrappers in the definition of additional wrappers.

users/tominabox1/rules.mk

@@ -0,0 +1,26 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+CONSOLE_ENABLE = no
+TAP_DANCE_ENABLE = yes
+NKRO_ENABLE = yes
+BOOTMAGIC_ENABLE = full      # Virtual DIP switch configuration
+
+ifeq ($(strip $(KEYBOARD)), crkbd/rev1)
+RGB_MATRIX_ENABLE = WS2812
+EXTRAFLAGS += -flto
+BOOTLOADER = qmk-dfu
+OLED_DRIVER_ENABLE = yes
+endif
+
+ifeq ($(strip $(KEYBOARD)), lazydesigners/dimple)
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes        # Audio control and System control
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+# RGB_MATRIX_ENABLE = WS2812
+endif
+
+
+SRC += tominabox1.c

users/tominabox1/tominabox1.c

@@ -0,0 +1,281 @@
+#include "tominabox1.h"
+
+#ifdef KEYBOARD_lazydesigners_dimple
+#ifdef RGBLIGHT_ENABLE
+__attribute__ ((weak))
+void keyboard_post_init_keymap(void) {}
+
+void keyboard_post_init_user(void) { // sets the backlighting to come on upon successful load then turn off
+  rgblight_enable_noeeprom();
+  rgblight_sethsv_noeeprom(RGB_RED);
+  rgblight_mode_noeeprom(0);
+  wait_ms(700);
+  rgblight_disable_noeeprom();
+}
+#endif // RGBLIGHT
+#endif // Dimple
+
+
+#ifdef RGB_MATRIX_ENABLE
+void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type);
+static bool is_suspended;
+static bool rgb_matrix_enabled;
+
+__attribute__ ((weak))
+void suspend_power_down_keymap(void) {}
+
+void suspend_power_down_user(void) {
+    rgb_matrix_set_suspend_state(true);
+    if (!is_suspended) {
+        is_suspended = true;
+        rgb_matrix_enabled = (bool)rgb_matrix_config.enable;
+        rgb_matrix_disable_noeeprom();
+    }
+}
+
+__attribute__ ((weak))
+void suspend_wakeup_init_keymap(void) {}
+
+void suspend_wakeup_init_user(void) {
+    rgb_matrix_set_suspend_state(false);
+    is_suspended = false;
+    if (rgb_matrix_enabled) {
+        rgb_matrix_enable_noeeprom();
+    }
+}
+
+#    include "lib/lib8tion/lib8tion.h"
+extern led_config_t g_led_config;
+void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type) {
+    HSV hsv = {hue, sat, val};
+    if (hsv.v > rgb_matrix_config.hsv.v) {
+        hsv.v = rgb_matrix_config.hsv.v;
+    }
+
+    switch (mode) {
+        case 1:  // breathing
+        {
+            uint16_t time = scale16by8(g_rgb_counters.tick, speed / 8);
+            hsv.v         = scale8(abs8(sin8(time) - 128) * 2, hsv.v);
+            RGB rgb       = hsv_to_rgb(hsv);
+            for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
+                if (HAS_FLAGS(g_led_config.flags[i], led_type)) {
+                    rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
+                }
+            }
+            break;
+        }
+        default:  // Solid Color
+        {
+            RGB rgb = hsv_to_rgb(hsv);
+            for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
+                if (HAS_FLAGS(g_led_config.flags[i], led_type)) {
+                    rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
+                }
+            }
+            break;
+        }
+    }
+}
+#endif //RGB_MATRIX_ENABLE
+
+void dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) {
+    if (state->count == 1) {
+        register_code16(S(KC_2));
+    } else {
+        SEND_STRING("tom.campie@gmail.com");
+    }
+}
+
+void dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) {
+    if (state->count == 1) {
+        unregister_code16(S(KC_2));
+    } else {
+    }
+}
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+    [KC_EMAIL] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_cln_finished, dance_cln_reset),
+    [TD_SFT_CPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS),
+};
+
+#define TAPPING_TERM 200
+#define IGNORE_MOD_TAP_INTERRUPT
+
+#ifdef KEYBOARD_crkbd_rev1
+
+#endif // CRKBD
+
+uint16_t get_tapping_term(uint16_t keycode) {
+    switch (keycode) {
+        case LSFT_T(KC_CAPS):
+            return 250;
+        case KC_ENT_LOW:
+            return 150;
+        case KC_SPC_RSE:
+            return(250);
+        case LCTL_T(KC_TAB):
+            return 300;
+        default:
+            return TAPPING_TERM;
+    }
+};
+
+__attribute__ ((weak))
+layer_state_t layer_state_set_keymap (layer_state_t state) {
+  return state;
+}
+
+uint32_t layer_state_set_user(uint32_t state) {
+    state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+    switch (biton32(state)) {
+        case _LOWER:
+            break;
+        case _RAISE:
+            break;
+        case _ADJUST:
+            break;
+        default:
+            break;
+    }
+    return state;
+}
+
+#ifdef KEYBOARD_crkbd_rev1
+
+__attribute__((weak))
+void matrix_scan_keymap(void) {}
+
+extern bool oled_initialized;
+void matrix_scan_user(void) {
+  if(!oled_initialized) {
+    wait_ms(200);
+    oled_init(0);
+    return;
+  }
+  matrix_scan_keymap();
+  }
+
+extern uint8_t is_master;
+#endif // CRKBD
+
+uint16_t        oled_timer;
+
+__attribute__ ((weak))
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  #ifdef CONSOLE_ENABLE
+      uprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
+  #endif
+
+    if (record->event.pressed) {
+      #ifdef OLED_DRIVER_ENABLE
+        oled_timer = timer_read();
+        oled_on();
+        #endif // OLED_DRIVER_ENABLE
+    switch (keycode) {
+            case KC_BBB:
+                if (record->event.pressed) {
+                    SEND_STRING(":b:");
+                } else {}
+                break;
+            case KC_BEPIS:
+                if (record->event.pressed) {
+                    SEND_STRING("BEPIS");
+                } else {}
+                break;
+        }
+    }
+    return true;
+
+}
+#ifdef KEYBOARD_crkbd_rev1
+#ifdef OLED_DRIVER_ENABLE
+void render_logo(void) {
+    static const char PROGMEM logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+        0};
+    oled_write_P(logo, false);
+}
+
+void render_status_main(void) {
+    // Host Keyboard USB Status
+    oled_write_P(PSTR("USB: "), false);
+    switch (USB_DeviceState) {
+        case DEVICE_STATE_Unattached:
+            oled_write_P(PSTR("Unattached\n"), false);
+            break;
+        case DEVICE_STATE_Suspended:
+             oled_write_P(PSTR("Suspended\n"), false);
+            break;
+        case DEVICE_STATE_Configured:
+             oled_write_P(PSTR("Connected\n"), false);
+            break;
+        case DEVICE_STATE_Powered:
+             oled_write_P(PSTR("Powered\n"), false);
+            break;
+        case DEVICE_STATE_Default:
+             oled_write_P(PSTR("Default\n"), false);
+            break;
+        case DEVICE_STATE_Addressed:
+             oled_write_P(PSTR("Addressed\n"), false);
+            break;
+        default:
+             oled_write_P(PSTR("Invalid\n"), false);
+        }
+
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+    switch (biton32(layer_state)) {
+        case _BASE:
+            oled_write_P(PSTR("Colemak\n"), false);
+            break;
+        case _RAISE:
+            oled_write_P(PSTR("Numbers\n"), false);
+            break;
+        case _LOWER:
+            oled_write_P(PSTR("Symbols\n"), false);
+            break;
+        case _ADJUST:
+            oled_write_P(PSTR("Adjust\n"), false);
+            break;
+        case _ARROW:
+            oled_write_P(PSTR("Navigation\n"), false);
+            break;
+        case _FKEY:
+            oled_write_P(PSTR("Function\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
+    }
+
+    // Host Keyboard LED Status
+
+    oled_write_ln_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("Caps Lock\n") : PSTR("         \n"), false);
+}
+__attribute__ ((weak))
+void oled_task_keymap(void) {}
+
+void oled_task_user(void) {
+
+    if (timer_elapsed(oled_timer) > 20000) {
+        oled_off();
+        return;
+    }
+        if (is_master) {
+            render_status_main();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+        } else {
+            render_logo();
+            oled_scroll_left();
+        }
+        oled_task_keymap();
+    }
+
+#endif // OLED_Driver
+#endif // crkbd

users/tominabox1/tominabox1.h

@@ -0,0 +1,56 @@
+#pragma once
+#include "quantum.h"
+#include "action.h"
+#include "version.h"
+#include "wrappers.h"
+
+// #define KC_SFT_CPS MT(MOD_LSFT, KC_CAPS) // Act as Shift on hold and as CapsLock on tap
+#define SPC_LOW LT(_LOWER, KC_ENT) // Left space on tap, LOWER on hold
+#define SPC_UPR LT(_RAISE, KC_SPC) // Left space on tap, UPPER on hold
+
+extern keymap_config_t keymap_config;
+
+enum layers {
+    _BASE,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+    _ARROW,
+    _FKEY
+};
+
+enum custom_keycodes {
+    BASE = SAFE_RANGE,
+    KC_BEPIS,
+    KC_BBB,
+    LOWER,
+    RAISE,
+    ADJUST,
+    ARROW,
+    FKEY,
+    KC_LFT_NUM_F,
+    RGBRST,
+    KC_PASTA
+};
+
+enum tap_dance_indexes {
+    KC_EMAIL,
+    TD_SFT_CPS,
+};
+
+#define KC_ARROW MO(4)
+#define KC_LTOG  RGB_TOG
+#define KC_LHUI  RGB_HUI
+#define KC_LHUD  RGB_HUD
+#define KC_LSAI  RGB_SAI
+#define KC_LSAD  RGB_SAD
+#define KC_LVAI  RGB_VAI
+#define KC_LVAD  RGB_VAD
+#define KC_LMOD  RGB_MOD
+#define KC_CTLTB CTL_T(KC_TAB) // Tab on tap, ctrl on hold
+#define KC_SFT_CPS TD(TD_SFT_CPS) // Hold for shift, double tap for caps
+#define KC_ENT_LOW LT(_LOWER, KC_ENT) // Return on tap, Lower on hold
+#define KC_SPC_RSE LT(_RAISE, KC_SPC) // Space on tap, raise on hold
+#define KC_EML TD(KC_EMAIL) // Double tap @ for email macro
+#define KC_FKEY LT(_FKEY, KC_ENT) // Return on tap, Fkey on hold
+#define KC_NUMF TD(KC_LFT_NUM_F)

users/tominabox1/wrappers.h

@@ -0,0 +1,142 @@
+#pragma once
+#include "tominabox1.h"
+/*
+Since our quirky block definitions are basically a list of comma separated
+arguments, we need a wrapper in order for these definitions to be
+expanded before being used as arguments to the LAYOUT_xxx macro.
+*/
+#if (!defined(LAYOUT) && defined(KEYMAP))
+#    define LAYOUT KEYMAP
+#endif
+
+// clang-format off
+#define LAYOUT_wrapper(...)                  LAYOUT(__VA_ARGS__)
+#define LAYOUT_arrow_wrapper(...) 	         LAYOUT_arrow(__VA_ARGS__)
+
+/*
+  _____  _                 _
+ |  __ \(_)               | |
+ | |  | |_ _ __ ___  _ __ | | ___
+ | |  | | | '_ ` _ \| '_ \| |/ _ \
+ | |__| | | | | | | | |_) | |  __/
+ |_____/|_|_| |_| |_| .__/|_|\___|
+                    | |
+                    |_|
+*/
+// Dimple Base layer
+#define __________________DIMPLE1__________________       KC_GESC, KC_Q,    KC_W,    KC_F,    KC_P,    KC_G, KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC
+#define __________________DIMPLE2__________________       LCTL_T(KC_TAB), KC_A,    KC_R,    KC_S,    KC_T,    KC_D, KC_H,    KC_N,    KC_E,    KC_I,    KC_O, KC_QUOT
+#define __________________DIMPLE3L_________________       KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B
+#define __________________DIMPLE3R_________________       KC_K,    KC_M,    KC_COMM, KC_UP,  LT(_FKEY,KC_DOT)
+#define __________________DIMPLE4__________________       KC_LCTL, KC_LGUI, KC_LALT, KC_ENT_LOW,  KC_SPC_RSE,  KC_LEFT, KC_DOWN, KC_RGHT
+
+// Dimple Symbol Layer
+#define _________________LOWER_1___________________       KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC
+#define _________________LOWER_2___________________       KC_DEL,  KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE
+#define _________________LOWER_3___________________       KC_CAPS,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO, KC_PGUP, KC_QUES
+#define _________________LOWER_4___________________       LCA(KC_DEL),   KC_NO,   KC_NO,   KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_END
+
+// Dimple Number layer
+#define ___________________RAISE1__________________       KC_TILD, KC_EXLM, TD(KC_EMAIL),   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL
+#define ___________________RAISE2__________________       KC_NO,  KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS
+#define ___________________RAISE3__________________       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,   KC_DOT,   KC_SLSH
+#define ___________________RAISE4__________________       KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS,   KC_NO,   KC_NO
+
+// Dimple F-key layer
+#define ___________________FKEY1___________________       KC_PASTA, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_NO
+#define ___________________FKEY2___________________       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_F11,   KC_F12,   KC_NO
+#define ___________________FKEY3___________________       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO
+#define ___________________FKEY4___________________       KC_NO, KC_NO, KC_NO, KC_NO,   KC_NO,   KC_TRNS,   KC_NO, KC_NO
+
+// Dimple Adjust layer
+#define ___________________ADJST1__________________       RESET,RGBRST,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO
+#define ___________________ADJST2__________________       RGB_M_P,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO
+#define ___________________ADJST3__________________       RGB_MOD,   RGB_HUI,   RGB_HUD,   RGB_M_SN,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO
+#define ___________________ADJST4__________________       RGB_VAD, RGB_TOG, RGB_VAI, KC_NO,   KC_NO,   KC_TRNS,   KC_NO,   KC_NO
+
+/*
+__  __ _       _
+|  \/  (_)     (_)
+| \  / |_ _ __  ___   ____ _ _ __
+| |\/| | | '_ \| \ \ / / _` | '_ \
+| |  | | | | | | |\ V / (_| | | | |
+|_|  |_|_|_| |_|_| \_/ \__,_|_| |_|
+*/
+
+
+// Minivan Base Layer
+#define __________________MINIVAN1_________________       __________________DIMPLE1__________________
+#define __________________MINIVAN2_________________       __________________DIMPLE2__________________
+#define __________________MINIVAN3_________________       __________________DIMPLE3L_________________, __________________DIMPLE3R_________________, KC_RSFT
+#define __________________MINIVAN4_________________       KC_LCTL, KC_LGUI, KC_LALT, KC_ENT_LOW,  KC_SPC_RSE,  KC_LEFT, KC_DOWN, KC_RGHT, MO(_FKEY)
+
+/* Minivan Symbol Layer
+#define _________________LOWER_1___________________
+#define _________________LOWER_2___________________        */
+#define __________________MININUM3_________________       _________________LOWER_3___________________, KC_SLSH
+#define __________________MININUM4_________________       _________________LOWER_4___________________, KC_END
+
+/* Minvian Number Layer
+#define ___________________RAISE1__________________
+#define ___________________RAISE2__________________       */
+#define ___________________RVAN_3__________________       ___________________RAISE3__________________, KC_NO
+#define ___________________RVAN_4__________________       ___________________RAISE4__________________, KC_NO
+
+/* Minvian F-key layer
+#define ___________________FKEY1___________________
+#define ___________________FKEY2___________________       */
+#define ___________________FVAN_3__________________       ___________________FKEY3___________________, KC_NO
+#define ___________________FVAN_4__________________       ___________________FKEY4___________________, KC_TRNS
+
+/* Minivan Adjust Layer
+#define ___________________ADJST1__________________
+#define ___________________ADJST2__________________       */
+#define ___________________ADJVAN3_________________       ___________________ADJST3__________________, KC_NO
+#define ___________________ADJVAN4_________________       ___________________ADJST4__________________, KC_TRNS
+
+/*
+  _____ _____  _  ______  _____
+ / ____|  __ \| |/ /  _ \|  __ \
+| |    | |__) | ' /| |_) | |  | |
+| |    |  _  /|  < |  _ <| |  | |
+| |____| | \ \| . \| |_) | |__| |
+ \_____|_|  \_\_|\_\____/|_____/
+*/
+
+// CRKBD Base Layer
+#define ___________________CRKBD1__________________       __________________DIMPLE1__________________
+#define ___________________CRKBD2__________________       __________________DIMPLE2__________________
+#define ___________________CRKBD3__________________       __________________DIMPLE3L_________________, KC_K, KC_M,KC_COMM,   KC_DOT,  KC_SLSH,  KC_BBB
+#define ___________________CRKBD4__________________       KC_LGUI, KC_LALT,KC_ENT_LOW,  KC_SPC_RSE, KC_ARROW, KC_FKEY
+
+/* CRKBD Number layer
+#define ___________________RAISE1__________________
+#define ___________________RAISE1__________________        */
+#define ___________________CRKBD_RAISE3____________       ___________________RVAN_3__________________
+#define ___________________CRKBD_RAISE4____________       ___________________CRKBD4__________________
+
+/* CRKBD Symbol Layer
+#define _________________LOWER_1___________________
+#define _________________LOWER_2___________________       */
+#define ___________________CRKBD_LOW3______________       __________________MININUM3_________________
+#define ___________________CRKBD_LOW4______________       ___________________CRKBD4__________________
+
+/* CRKBD F-key layer
+#define ___________________FKEY1___________________
+#define ___________________FKEY2___________________       */
+#define ___________________CRKBD_FKEY3_____________       ___________________FVAN_3__________________
+#define ___________________CRKBD_FKEY4_____________       ___________________CRKBD4__________________
+
+/* CRKBD adjust layer
+#define ___________________ADJST1__________________      */
+#define ___________________CRKBD_ADJST2____________       KC_LTOG,KC_LHUI,KC_LSAI,KC_LVAI,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
+#define ___________________CRKBD_ADJST3____________       KC_LMOD,  KC_LHUD,  KC_LSAD,  KC_LVAD, KC_NO, KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
+#define ___________________CRKBD_ADJST4____________       ___________________CRKBD4__________________
+
+// CRKBD arrow layer
+#define ___________________ARROW1__________________       KC_NO, KC_NO,    KC_UP, KC_NO, KC_NO, KC_NO, KC_NO,  KC_PGDN,    KC_UP,  KC_PGUP, KC_NO, KC_NO
+#define ___________________ARROW2__________________       KC_NO,  KC_LEFT,  KC_DOWN, KC_RIGHT, KC_NO, KC_NO,KC_NO,  KC_LEFT,  KC_DOWN,  KC_RGHT, KC_NO, KC_NO
+#define ___________________ARROW3__________________       KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
+#define ___________________ARROW4__________________       ___________________CRKBD4__________________
+
+// clang-format on

util/linux_install.sh

@@ -77,6 +77,7 @@ elif grep ID /etc/os-release | grep -q 'arch\|manjaro'; then
 		gcc \
 		git \
 		python \
+		python-pip \
 		unzip \
 		wget \
 		zip
@@ -213,4 +214,4 @@ else
 fi
 
 # Global install tasks
-pip3 install -r ${util_dir}/../requirements.txt
+pip3 install --user -r ${util_dir}/../requirements.txt

util/rules_cleaner.sh

@@ -0,0 +1,40 @@
+#!/bin/bash
+
+# This script finds all rules.mk files in keyboards/ subdirectories,
+# and deletes the build option filesize impacts from them.
+
+# Print an error message with the word "ERROR" in red.
+echo_error() {
+    echo -e "[\033[0;91mERROR\033[m]: $1"
+}
+
+# If we've been started from util/, we want to be in qmk_firmware/
+[[ "$PWD" == *util ]] && cd ..
+
+# The root qmk_firmware/ directory should have a subdirectory called quantum/
+if [ ! -d "quantum" ]; then
+    echo_error "Could not detect the QMK firmware directory!"
+    echo_error "Are you sure you're in the right place?"
+    exit 1
+fi
+
+# Set the inplace editing parameter for sed.
+# macOS/BSD sed expects a file extension immediately following -i.
+set_sed_i() {
+    sed_i=(-i)
+
+    case $(uname -a) in
+        *Darwin*) sed_i=(-i "")
+    esac
+}
+set_sed_i
+
+# Exclude keyamps/ directories
+files=$(find keyboards -type f -name 'rules.mk' -not \( -path '*/keymaps*' -prune \))
+
+# Edit rules.mk files 
+for file in $files; do
+  sed "${sed_i[@]}" -e "s/(+[0-9].*)$//g" "$file"
+done
+
+echo "Cleaned up rules.mk files."