Merge branch 'master' into cheapinov2

Ref: https://github.com/tompi/cheapino/issues/38

keyboards/bastardkb/blacktyl/rules.mk

@@ -26,6 +26,7 @@ SPLIT_KEYBOARD         = yes
 MOUSEKEY_ENABLE = yes 
 EXTRAKEY_ENABLE = yes
 
+CAPS_WORD_ENABLE = yes
 RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
 RGBLIGHT_SUPPORTED = no    # RGB underglow is supported, but not enabled by default
 RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality

keyboards/cheapino/cheapino.c

@@ -0,0 +1,75 @@
+#include "wait.h"
+#include "quantum.h"
+
+// This is to keep state between callbacks, when it is 0 the
+// initial RGB flash is finished
+uint8_t _hue_countdown = 50;
+
+// These are to keep track of user selected color, so we
+// can restore it after RGB flash
+uint8_t _hue;
+uint8_t _saturation;
+uint8_t _value;
+
+// Do a little 2.5 seconds display of the different colors
+// Use the deferred executor so the LED flash dance does not
+// stop us from using the keyboard.
+// https://docs.qmk.fm/#/custom_quantum_functions?id=deferred-executor-registration
+uint32_t flash_led(uint32_t next_trigger_time, void *cb_arg) {
+    rgblight_sethsv(_hue_countdown * 5, 230, 70);
+    _hue_countdown--;
+    if (_hue_countdown == 0) {
+        // Finished, reset to user chosen led color
+        rgblight_sethsv(_hue, _saturation, _value);
+        return 0;
+    } else {
+        return 50;
+    }
+}
+
+void keyboard_post_init_user(void) {
+    //debug_enable=true;
+    //debug_matrix=true;
+    //debug_keyboard=true;
+    //debug_mouse=true;
+
+    // Store user selected rgb hsv:
+    _hue = rgblight_get_hue();
+    _saturation = rgblight_get_sat();
+    _value = rgblight_get_val();
+
+    // Flash a little on start
+    defer_exec(50, flash_led, NULL);
+}
+
+// Make the builtin RGB led show different colors per layer:
+// This seemed like a good idea but turned out pretty annoying,
+// to me at least... Uncomment the lines below to enable
+/*
+uint8_t get_hue(uint8_t layer) {
+    switch (layer) {
+        case 6:
+            return 169;
+        case 5:
+            return 43;
+        case 4:
+            return 85;
+        case 3:
+            return 120;
+        case 2:
+            return 180;
+        case 1:
+            return 220;
+        default:
+            return 0;
+    }
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    uint8_t sat = rgblight_get_sat();
+    uint8_t val = rgblight_get_val();
+    uint8_t hue = get_hue(get_highest_layer(state));
+    rgblight_sethsv(hue, sat, val);
+    return state;
+}
+*/

keyboards/cheapino/config.h

@@ -0,0 +1,26 @@
+// Copyright 2023 Thomas Haukland (@tompi)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define BOTH_SHIFTS_TURNS_ON_CAPS_WORD
+#define WS2812_PIO_USE_PIO1 // Force the usage of PIO1 peripheral, by default the WS2812 implementation uses the PIO0 peripheral
+#define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB
+
+
+// Pick good defaults for enabling homerow modifiers
+#define TAPPING_TERM 230
+
+#define WS2812_DI_PIN GP16 // The pin connected to the data pin of the LEDs
+#define RGBLIGHT_LED_COUNT 1                     // The number of LEDs connected
+
+// Max number of threads
+#define MAX_DEFERRED_EXECUTORS 32
+
+// #define DEBUG_MATRIX_SCAN_RATE
+
+// Avoid very bright default LED
+#define RGBLIGHT_DEFAULT_HUE 128 // Sets the default hue value, if none has been set
+#define RGBLIGHT_DEFAULT_SAT 128 // Sets the default saturation value, if none has been set
+#define RGBLIGHT_DEFAULT_VAL 32 // Sets the default brightness value, if none has been set
+                                

keyboards/cheapino/encoder.c

@@ -0,0 +1,63 @@
+#include "matrix.h"
+#include "quantum.h"
+
+#define COL_SHIFTER ((uint16_t)1)
+
+#define ENC_ROW 3
+#define ENC_A_COL 2
+#define ENC_B_COL 4
+#define ENC_BUTTON_COL 0
+
+static bool colABPressed   = false;
+static bool encoderPressed = false;
+
+void clicked(void) {
+    tap_code(KC_MPLY);
+}
+
+void turned(bool clockwise) {
+    if (IS_LAYER_ON(6)) {
+        tap_code(clockwise ? KC_VOLU : KC_VOLD);
+    } else if (IS_LAYER_ON(3)) {
+        tap_code16(clockwise ? LCTL(KC_TAB) : LCTL(LSFT(KC_TAB)));
+    } else if (IS_LAYER_ON(5)) {
+        tap_code16(clockwise ? LGUI(KC_Y) : LGUI(KC_Z));
+    } else {
+        tap_code16(clockwise ? KC_PGDN : KC_PGUP);
+    }
+}
+
+void fix_encoder_action(matrix_row_t current_matrix[]) {
+    matrix_row_t encoder_row = current_matrix[ENC_ROW];
+
+    if (encoder_row & (COL_SHIFTER << ENC_BUTTON_COL)) {
+        encoderPressed = true;
+    } else {
+        // Only trigger click on release
+        if (encoderPressed) {
+            encoderPressed = false;
+            clicked();
+        }
+    }
+
+    // Check which way the encoder is turned:
+    bool colA = encoder_row & (COL_SHIFTER << ENC_A_COL);
+    bool colB = encoder_row & (COL_SHIFTER << ENC_B_COL);
+
+    if (colA && colB) {
+        colABPressed = true;
+    } else if (colA) {
+        if (colABPressed) {
+            // A+B followed by A means clockwise
+            colABPressed = false;
+            turned(true);
+        }
+    } else if (colB) {
+        if (colABPressed) {
+            // A+B followed by B means counter-clockwise
+            colABPressed = false;
+            turned(false);
+        }
+    }
+    current_matrix[ENC_ROW] = 0;
+}

keyboards/cheapino/encoder.h

@@ -0,0 +1,5 @@
+//
+// Created by Thomas Haukland on 25/03/2023.
+//
+
+void fix_encoder_action(matrix_row_t current_matrix[]);

keyboards/cheapino/ghosting.c

@@ -0,0 +1,128 @@
+//
+// Created by Thomas Haukland on 2024-05-05.
+//
+
+#include "matrix.h"
+#include "quantum.h"
+#include "print.h"
+
+// This is just to be able to declare constants as they appear in the qmk console
+#define rev(b) \
+            ((b & 1) << 15) | \
+            ((b & (1 << 1)) << 13) | \
+            ((b & (1 << 2)) << 11) | \
+            ((b & (1 << 3)) << 9) | \
+            ((b & (1 << 4)) << 7) | \
+            ((b & (1 << 5)) << 5) | \
+            ((b & (1 << 6)) << 3) | \
+            ((b & (1 << 7)) << 1) | \
+            ((b & (1 << 8)) >> 1) | \
+            ((b & (1 << 9)) >> 3) | \
+            ((b & (1 << 10)) >> 5) | \
+            ((b & (1 << 11)) >> 7) | \
+            ((b & (1 << 12)) >> 9) | \
+            ((b & (1 << 13)) >> 11) | \
+            ((b & (1 << 14)) >> 13) | \
+            b >> 15
+
+/* This is for debugging the matrix rows
+void printBits(uint16_t n)
+{
+    long i;
+    for (i = 15; i >= 0; i--) {
+        if ((n & (1 << i)) != 0) {
+            printf("1");
+        }
+        else {
+            printf("0");
+        }
+    }
+    printf("\n");
+}
+*/
+
+bool bit_pattern_set(uint16_t number, uint16_t bitPattern) {
+    return !(~number & bitPattern);
+}
+
+void fix_ghosting_instance(
+        matrix_row_t current_matrix[],
+        unsigned short row_num_with_possible_error_cause,
+        uint16_t possible_error_cause,
+        unsigned short row_num_with_possible_error,
+        uint16_t possible_error,
+        uint16_t error_fix) {
+    if (bit_pattern_set(current_matrix[row_num_with_possible_error_cause], possible_error_cause)) {
+        if (bit_pattern_set(current_matrix[row_num_with_possible_error], possible_error)) {
+            current_matrix[row_num_with_possible_error] = current_matrix[row_num_with_possible_error] ^ error_fix;
+        }
+    }
+}
+
+void fix_ghosting_column(
+        matrix_row_t matrix[],
+        uint16_t possible_error_cause,
+        uint16_t possible_error,
+        uint16_t error_fix) {
+    // First the right side
+    for (short i = 0; i<3; i++) {
+        fix_ghosting_instance(matrix, i, possible_error_cause, (i+1)%3, possible_error, error_fix);
+        fix_ghosting_instance(matrix, i, possible_error_cause, (i+2)%3, possible_error, error_fix);
+    }
+
+    // Then exactly same procedure on the left side
+    for (short i = 0; i<3; i++) {
+        fix_ghosting_instance(matrix, i+4, possible_error_cause<<6, 4+((i+1)%3), possible_error<<6, error_fix<<6);
+        fix_ghosting_instance(matrix, i+4, possible_error_cause<<6, 4+((i+2)%3), possible_error<<6, error_fix<<6);
+    }
+}
+
+// For QWERTY layout, key combo a+s+e also outputs q. This suppresses the q, and other similar ghosts
+// These are observed ghosts(following a pattern). TODO: need to fix this for v3
+// Might need to add 2 diodes(one in each direction) for every row, to increase voltage drop.
+void fix_ghosting(matrix_row_t matrix[]) {
+    fix_ghosting_column(matrix,
+                        rev(0B0110000000000000),
+                        rev(0B1010000000000000),
+                        rev(0B0010000000000000));
+    fix_ghosting_column(matrix,
+                        rev(0B0110000000000000),
+                        rev(0B0101000000000000),
+                        rev(0B0100000000000000));
+
+    fix_ghosting_column(matrix,
+                        rev(0B0001100000000000),
+                        rev(0B0010100000000000),
+                        rev(0B0000100000000000));
+    fix_ghosting_column(matrix,
+                        rev(0B0001100000000000),
+                        rev(0B0001010000000000),
+                        rev(0B0001000000000000));
+
+    fix_ghosting_column(matrix,
+                        rev(0B1000010000000000),
+                        rev(0B1000100000000000),
+                        rev(0B1000000000000000));
+    fix_ghosting_column(matrix,
+                        rev(0B1000010000000000),
+                        rev(0B0100010000000000),
+                        rev(0B0000010000000000));
+
+    fix_ghosting_column(matrix,
+                        rev(0B1001000000000000),
+                        rev(0B0101000000000000),
+                        rev(0B0001000000000000));
+    fix_ghosting_column(matrix,
+                        rev(0B1001000000000000),
+                        rev(0B1010000000000000),
+                        rev(0B1000000000000000));
+
+    fix_ghosting_column(matrix,
+                        rev(0B0100100000000000),
+                        rev(0B0100010000000000),
+                        rev(0B0100000000000000));
+    fix_ghosting_column(matrix,
+                        rev(0B0100100000000000),
+                        rev(0B1000100000000000),
+                        rev(0B0000100000000000));
+}

keyboards/cheapino/ghosting.h

@@ -0,0 +1,5 @@
+//
+// Created by Thomas Haukland on 2024-05-05.
+//
+
+void fix_ghosting(matrix_row_t current_matrix[]);

keyboards/cheapino/halconf.h

@@ -0,0 +1,4 @@
+
+#pragma once
+
+#include_next <halconf.h>

keyboards/cheapino/keyboard.json

@@ -0,0 +1,94 @@
+{
+    "manufacturer": "Thomas Haukland",
+    "keyboard_name": "cheapino2",
+    "maintainer": "tompi",
+    "bootloader": "rp2040",
+    "diode_direction": "ROW2COL",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true
+    },
+    "community_layouts": ["split_3x5_3"],
+    "matrix_pins": {
+        "cols": [
+            "GP6",
+            "GP6",
+            "GP5",
+            "GP5",
+            "GP4",
+            "GP4",
+
+            "GP14",
+            "GP14",
+            "GP15",
+            "GP15",
+            "GP26",
+            "GP26"
+        ],
+        "rows": ["GP3", "GP1", "GP2", "GP0",    "GP27", "GP28", "GP29", "GP8"]
+    },
+    "processor": "RP2040",
+    "url": "",
+    "usb": {
+        "device_version": "1.0.1",
+        "pid": "0x10B8",
+        "vid": "0xFEE3",
+        "force_nkro": false
+    },
+    "layouts": {
+        "LAYOUT_split_3x5_3": {
+            "layout": [
+                { "matrix": [4, 10], "x": 0, "y": 0.25 },
+                { "matrix": [4, 9], "x": 1, "y": 0.125 },
+                { "matrix": [4, 8], "x": 2, "y": 0 },
+                { "matrix": [4, 7], "x": 3, "y": 0.125 },
+                { "matrix": [4, 6], "x": 4, "y": 0.25 },
+
+                { "matrix": [0, 0], "x": 7, "y": 0.25 },
+                { "matrix": [0, 1], "x": 8, "y": 0.125 },
+                { "matrix": [0, 2], "x": 9, "y": 0 },
+                { "matrix": [0, 3], "x": 10, "y": 0.125 },
+                { "matrix": [0, 4], "x": 11, "y": 0.25 },
+
+
+                { "matrix": [5, 10], "x": 0, "y": 1.25 },
+                { "matrix": [5, 9], "x": 1, "y": 1.125 },
+                { "matrix": [5, 8], "x": 2, "y": 1 },
+                { "matrix": [5, 7], "x": 3, "y": 1.125 },
+                { "matrix": [5, 6], "x": 4, "y": 1.25 },
+
+                { "matrix": [1, 0], "x": 7, "y": 1.25 },
+                { "matrix": [1, 1], "x": 8, "y": 1.125 },
+                { "matrix": [1, 2], "x": 9, "y": 1 },
+                { "matrix": [1, 3], "x": 10, "y": 1.125 },
+                { "matrix": [1, 4], "x": 11, "y": 1.25 },
+
+
+                { "matrix": [6, 10], "x": 0, "y": 2.25 },
+                { "matrix": [6, 9], "x": 1, "y": 2.125 },
+                { "matrix": [6, 8], "x": 2, "y": 2 },
+                { "matrix": [6, 7], "x": 3, "y": 2.125 },
+                { "matrix": [6, 6], "x": 4, "y": 2.25 },
+
+                { "matrix": [2, 0], "x": 7, "y": 2.25 },
+                { "matrix": [2, 1], "x": 8, "y": 2.125 },
+                { "matrix": [2, 2], "x": 9, "y": 2 },
+                { "matrix": [2, 3], "x": 10, "y": 2.125 },
+                { "matrix": [2, 4], "x": 11, "y": 2.25 },
+
+
+                { "matrix": [6, 11], "x": 2.5, "y": 3.25 },
+                { "matrix": [5, 11], "x": 3.5, "y": 3.5 },
+                { "matrix": [4, 11], "x": 4.5, "y": 3.75 },
+
+                { "matrix": [0, 5], "x": 6.5, "y": 3.75 },
+                { "matrix": [1, 5], "x": 7.5, "y": 3.5 },
+                { "matrix": [2, 5], "x": 8.5, "y": 3.25 }
+            ]
+        }
+    }
+}

keyboards/cheapino/keymaps/default/keymap.json

@@ -0,0 +1,163 @@
+{
+  "version": 1,
+  "notes": "Cheapino default keymap",
+  "documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs>\n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n",
+  "keyboard": "bastardkb/skeletyl/blackpill",
+  "keymap": "default",
+  "layout": "LAYOUT_split_3x5_3",
+  "layers": [
+    [
+      "KC_Q",
+      "KC_W",
+      "KC_E",
+      "KC_R",
+      "KC_T",
+      "KC_Y",
+      "KC_U",
+      "KC_I",
+      "KC_O",
+      "KC_P",
+      "KC_A",
+      "KC_S",
+      "KC_D",
+      "KC_F",
+      "KC_G",
+      "KC_H",
+      "KC_J",
+      "KC_K",
+      "KC_L",
+      "KC_SCLN",
+      "KC_Z",
+      "KC_X",
+      "KC_C",
+      "KC_V",
+      "KC_B",
+      "KC_N",
+      "KC_M",
+      "KC_COMM",
+      "KC_DOT",
+      "KC_SLSH",
+      "KC_LGUI",
+      "KC_SPC",
+      "MO(1)",
+      "MO(2)",
+      "KC_ENT",
+      "KC_RALT"
+    ],
+    [
+      "KC_1",
+      "KC_2",
+      "KC_3",
+      "KC_4",
+      "KC_5",
+      "KC_6",
+      "KC_7",
+      "KC_8",
+      "KC_9",
+      "KC_0",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_LEFT",
+      "KC_DOWN",
+      "KC_UP",
+      "KC_RGHT",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_LGUI",
+      "KC_SPC",
+      "KC_TRNS",
+      "MO(3)",
+      "KC_ENT",
+      "KC_RALT"
+    ],
+    [
+      "KC_EXLM",
+      "KC_AT",
+      "KC_HASH",
+      "KC_DLR",
+      "KC_PERC",
+      "KC_CIRC",
+      "KC_AMPR",
+      "KC_ASTR",
+      "KC_LPRN",
+      "KC_RPRN",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_MINS",
+      "KC_EQL",
+      "KC_LBRC",
+      "KC_RBRC",
+      "KC_BSLS",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_UNDS",
+      "KC_PLUS",
+      "KC_LCBR",
+      "KC_RCBR",
+      "KC_PIPE",
+      "KC_LGUI",
+      "KC_SPC",
+      "MO(3)",
+      "KC_TRNS",
+      "KC_ENT",
+      "KC_RALT"
+    ],
+    [
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "RGB_HUI",
+      "RGB_SAI",
+      "RGB_VAI",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "RGB_HUD",
+      "RGB_SAD",
+      "RGB_VAD",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_LGUI",
+      "KC_SPC",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_ENT",
+      "KC_RALT"
+    ]
+  ],
+  "author": ""
+}

keyboards/cheapino/keymaps/lars/config.h

@@ -0,0 +1,51 @@
+/*
+Copyright 2020 Pierre Chevalier <pierrechevalier83@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+// Set the mouse settings to a comfortable speed/accuracy trade-off,
+// assuming a screen refresh rate of 60 Htz or higher
+// The default is 50. This makes the mouse ~3 times faster and more accurate
+#define MOUSEKEY_INTERVAL 16
+// The default is 20. Since we made the mouse about 3 times faster with the previous setting,
+// give it more time to accelerate to max speed to retain precise control over short distances.
+#define MOUSEKEY_TIME_TO_MAX 40
+// The default is 300. Let's try and make this as low as possible while keeping the cursor responsive
+#define MOUSEKEY_DELAY 100
+// It makes sense to use the same delay for the mouseweel
+#define MOUSEKEY_WHEEL_DELAY 100
+// The default is 100
+#define MOUSEKEY_WHEEL_INTERVAL 50
+// The default is 40
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 100
+
+// Pick good defaults for enabling homerow modifiers
+#undef TAPPING_TERM
+#define TAPPING_TERM 200
+// #define PERMISSIVE_HOLD
+
+#define TAPPING_FORCE_HOLD
+//#define RETRO_TAPPING
+
+// Underglow configuration
+#ifdef RGBLIGHT_ENABLE
+  #define RGBLIGHT_ANIMATIONS
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+#endif
+
+//#define UNICODE_SELECTED_MODES UC_MAC

keyboards/cheapino/keymaps/lars/keymap.json

@@ -0,0 +1,125 @@
+{
+  "version": 1,
+  "notes": "My awesome keymap",
+  "documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs>\n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n",
+  "keyboard": "bastardkb/skeletyl/blackpill",
+  "keymap": "default",
+  "layout": "LAYOUT_split_3x5_3",
+  "layers": [
+    [
+      "KC_Q",
+      "KC_W",
+      "KC_F",
+      "KC_P",
+      "KC_B",
+      "KC_J",
+      "KC_L",
+      "KC_U",
+      "KC_Y",
+      "KC_SCLN",
+      "KC_A",
+      "KC_R",
+      "KC_S",
+      "KC_T",
+      "KC_G",
+      "KC_M",
+      "KC_N",
+      "KC_E",
+      "KC_I",
+      "KC_O",
+      "LSFT_T(KC_Z)",
+      "LCTL_T(KC_X)",
+      "RALT_T(KC_C)",
+      "KC_D",
+      "KC_V",
+      "KC_K",
+      "KC_H",
+      "RALT_T(KC_COMM)",
+      "LCTL_T(KC_DOT)",
+      "LSFT_T(KC_SLSH)",
+      "TO(1)",
+      "KC_BSPC",
+      "KC_TAB",
+      "KC_LGUI",
+      "KC_SPC",
+      "KC_ENT"
+    ],
+    [
+      "KC_TRNS",
+      "KC_7",
+      "KC_8",
+      "KC_9",
+      "KC_TRNS",
+      "KC_QUOT",
+      "KC_MINS",
+      "KC_EQL",
+      "KC_ASTR",
+      "KC_CIRC",
+      "KC_TRNS",
+      "KC_4",
+      "KC_5",
+      "KC_6",
+      "KC_0",
+      "KC_BSLS",
+      "KC_LPRN",
+      "KC_RPRN",
+      "KC_LBRC",
+      "KC_RBRC",
+      "KC_LSFT",
+      "KC_1",
+      "KC_2",
+      "KC_3",
+      "KC_TRNS",
+      "KC_PIPE",
+      "KC_GRV",
+      "KC_LALT",
+      "KC_LCTL",
+      "KC_RSFT",
+      "TO(2)",
+      "KC_BSPC",
+      "KC_TAB",
+      "KC_DEL",
+      "TO(0)",
+      "KC_ENT"
+    ],
+    [
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_PGUP",
+      "KC_TRNS",
+      "KC_TRNS",
+      "ANY(UC(0xE6))",
+      "ANY(UC(0xF8))",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_LEFT",
+      "KC_UP",
+      "KC_DOWN",
+      "KC_RGHT",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_LGUI",
+      "ANY(UC(0xE5))",
+      "LCTL(KC_LALT)",
+      "LCA(KC_LSFT)",
+      "KC_TRNS",
+      "KC_HOME",
+      "KC_PGDN",
+      "KC_END",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_RBRC",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TAB",
+      "KC_DEL",
+      "TO(0)",
+      "KC_TRNS"
+    ]
+  ],
+  "author": "thomas.haukland@gmail.com"
+}

keyboards/cheapino/keymaps/tompi/keymap.json

@@ -0,0 +1,277 @@
+{
+  "version": 1,
+  "notes": "Tompi keymap",
+  "documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs>\n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n",
+  "keyboard": "bastardkb/skeletyl/blackpill",
+  "keymap": "tompi",
+  "layout": "LAYOUT_split_3x5_3",
+  "layers": [
+    [
+      "KC_Q",
+      "KC_W",
+      "KC_F",
+      "KC_P",
+      "KC_B",
+      "KC_J",
+      "KC_L",
+      "KC_U",
+      "KC_Y",
+      "KC_SCLN",
+      "LGUI_T(KC_A)",
+      "LALT_T(KC_R)",
+      "LCTL_T(KC_S)",
+      "LSFT_T(KC_T)",
+      "KC_G",
+      "KC_M",
+      "RSFT_T(KC_N)",
+      "LCTL_T(KC_E)",
+      "LALT_T(KC_I)",
+      "LGUI_T(KC_O)",
+      "KC_Z",
+      "KC_X",
+      "KC_C",
+      "KC_D",
+      "LT(5,KC_V)",
+      "LT(1,KC_K)",
+      "KC_H",
+      "KC_COMM",
+      "KC_DOT",
+      "KC_SLSH",
+      "LT(6,KC_ESC)",
+      "LT(3,KC_SPC)",
+      "LT(5,KC_TAB)",
+      "LT(1,KC_DEL)",
+      "LT(2,KC_BSPC)",
+      "LT(4,KC_ENT)"
+    ],
+    [
+      "KC_VOLU",
+      "KC_WH_L",
+      "KC_NO",
+      "KC_WH_U",
+      "KC_WH_R",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "QK_CLEAR_EEPROM",
+      "ANY(QK_RBT)",
+      "KC_NO",
+      "KC_MS_L",
+      "KC_MS_U",
+      "KC_MS_R",
+      "KC_MUTE",
+      "KC_NO",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_VOLD",
+      "KC_MNXT",
+      "KC_MS_D",
+      "KC_WH_D",
+      "KC_MPLY",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO"
+    ],
+    [
+      "NK_TOGG",
+      "KC_HOME",
+      "KC_DEL",
+      "KC_PGUP",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_LEFT",
+      "KC_UP",
+      "KC_RGHT",
+      "KC_NO",
+      "KC_NO",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_NO",
+      "KC_END",
+      "KC_DOWN",
+      "KC_PGDN",
+      "KC_NO",
+      "KC_NO",
+      "KC_BTN1",
+      "KC_BTN2",
+      "KC_BTN3",
+      "KC_BTN4",
+      "KC_NO",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO"
+    ],
+    [
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_WH_U",
+      "KC_AT",
+      "KC_UNDS",
+      "KC_PIPE",
+      "KC_GRV",
+      "KC_PERC",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "RGB_TOG",
+      "KC_HASH",
+      "KC_TAB",
+      "KC_EXLM",
+      "KC_DQUO",
+      "KC_DLR",
+      "KC_BTN4",
+      "KC_BTN3",
+      "KC_BTN2",
+      "KC_BTN1",
+      "KC_WH_D",
+      "KC_TILD",
+      "KC_QUOT",
+      "KC_BSLS",
+      "KC_SLSH",
+      "KC_AMPR",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_NO"
+    ],
+    [
+      "KC_GRV",
+      "KC_CIRC",
+      "KC_LT",
+      "KC_GT",
+      "KC_SCLN",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_LCBR",
+      "KC_RCBR",
+      "KC_LPRN",
+      "KC_RPRN",
+      "KC_AT",
+      "KC_NO",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_MINS",
+      "KC_EXLM",
+      "KC_LBRC",
+      "KC_RBRC",
+      "KC_TRNS",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_NO",
+      "KC_NO"
+    ],
+    [
+      "ANY(QK_RBT)",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_F7",
+      "KC_F8",
+      "KC_F9",
+      "KC_F10",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_NO",
+      "KC_NO",
+      "KC_F4",
+      "KC_F5",
+      "KC_F6",
+      "KC_F11",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_F1",
+      "KC_F2",
+      "KC_F3",
+      "KC_F12",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS"
+    ],
+    [
+      "RGB_SPI",
+      "RGB_VAI",
+      "RGB_SAI",
+      "RGB_HUI",
+      "RGB_MOD",
+      "KC_PPLS",
+      "KC_7",
+      "KC_8",
+      "KC_9",
+      "KC_PAST",
+      "EE_CLR",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "RGB_TOG",
+      "KC_PMNS",
+      "KC_4",
+      "KC_5",
+      "KC_6",
+      "KC_PSLS",
+      "RGB_SPD",
+      "RGB_VAD",
+      "RGB_SAD",
+      "RGB_HUD",
+      "RGB_RMOD",
+      "KC_PDOT",
+      "KC_1",
+      "KC_2",
+      "KC_3",
+      "KC_PEQL",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_0",
+      "KC_COMM",
+      "KC_0"
+    ]
+  ],
+  "author": "thomas.haukland@gmail.com"
+}

keyboards/cheapino/keymaps/via/keymap.json

@@ -0,0 +1,163 @@
+{
+  "version": 1,
+  "notes": "Cheapino default keymap",
+  "documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs>\n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n",
+  "keyboard": "bastardkb/skeletyl/blackpill",
+  "keymap": "via",
+  "layout": "LAYOUT_split_3x5_3",
+  "layers": [
+    [
+      "KC_Q",
+      "KC_W",
+      "KC_E",
+      "KC_R",
+      "KC_T",
+      "KC_Y",
+      "KC_U",
+      "KC_I",
+      "KC_O",
+      "KC_P",
+      "LGUI_T(KC_A)",
+      "LALT_T(KC_S)",
+      "LCTL_T(KC_D)",
+      "LSFT_T(KC_F)",
+      "KC_G",
+      "KC_H",
+      "RSFT_T(KC_J)",
+      "LCTL_T(KC_K)",
+      "LALT_T(KC_L)",
+      "LGUI_T(KC_SCLN)",
+      "KC_Z",
+      "KC_X",
+      "KC_C",
+      "KC_V",
+      "LT(5,KC_B)",
+      "LT(1,KC_N)",
+      "KC_M",
+      "KC_COMM",
+      "KC_DOT",
+      "KC_SLSH",
+      "LT(6,KC_ESC)",
+      "LT(3,KC_SPC)",
+      "LT(5,KC_TAB)",
+      "LT(1,KC_DEL)",
+      "LT(2,KC_BSPC)",
+      "LT(4,KC_ENT)"
+    ],
+    [
+      "KC_VOLU",
+      "KC_WH_L",
+      "KC_MS_U",
+      "KC_WH_U",
+      "KC_WH_R",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "ANY(QK_RBT)",
+      "KC_MS_L",
+      "KC_BTN2",
+      "KC_BTN1",
+      "KC_MS_R",
+      "KC_MUTE",
+      "KC_NO",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_VOLD",
+      "KC_MNXT",
+      "KC_MS_D",
+      "KC_WH_D",
+      "KC_MPLY",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO"
+    ],
+    [
+      "KC_NO",
+      "KC_HOME",
+      "KC_DEL",
+      "KC_PGUP",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_LEFT",
+      "KC_UP",
+      "KC_RGHT",
+      "KC_NO",
+      "KC_NO",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_NO",
+      "KC_END",
+      "KC_DOWN",
+      "KC_PGDN",
+      "KC_NO",
+      "KC_NO",
+      "KC_BTN1",
+      "KC_BTN2",
+      "KC_BTN3",
+      "KC_BTN4",
+      "KC_NO",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO"
+    ],
+    [
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_WH_U",
+      "KC_AT",
+      "KC_UNDS",
+      "KC_PIPE",
+      "KC_GRV",
+      "KC_PERC",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_TRNS",
+      "RGB_TOG",
+      "KC_HASH",
+      "KC_TAB",
+      "KC_EXLM",
+      "KC_DQUO",
+      "KC_DLR",
+      "KC_BTN4",
+      "KC_BTN3",
+      "KC_BTN2",
+      "KC_BTN1",
+      "KC_WH_D",
+      "KC_TILD",
+      "KC_QUOT",
+      "KC_BSLS",
+      "KC_SLSH",
+      "KC_AMPR",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_TRNS",
+      "KC_TRNS",
+      "KC_NO"
+    ]
+  ],
+  "author": "thomas.haukland@gmail.com"
+}

keyboards/cheapino/matrix.c

@@ -0,0 +1,152 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+ Copied from here: https://github.com/e3w2q/qmk_firmware/blob/762fe3e0a7cbea768245a75520f06ff5a2f00b9f/keyboards/2x3test/matrix.c
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include "wait.h"
+#include "util.h"
+#include "matrix.h"
+#include "config.h"
+#include "quantum.h"
+#include "debounce.h"
+#include "encoder.h"
+#include "ghosting.h"
+#include "print.h"
+
+// How long the scanning code waits for changed io to settle.
+// Adjust from default 30 to weigh up for increased time spent ghost-hunting.
+// (the rp2040 does not seem to have any problems with this value...)
+#define MATRIX_IO_DELAY 25
+
+#define COL_SHIFTER ((uint16_t)1)
+
+static const pin_t row_pins[] = MATRIX_ROW_PINS;
+static const pin_t col_pins[] = MATRIX_COL_PINS;
+static matrix_row_t previous_matrix[MATRIX_ROWS];
+
+static void select_row(uint8_t row) {
+    setPinOutput(row_pins[row]);
+    writePinLow(row_pins[row]);
+}
+
+static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); }
+
+static void unselect_rows(void) {
+    for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        setPinInputHigh(row_pins[x]);
+    }
+}
+
+static void select_col(uint8_t col) {
+    setPinOutput(col_pins[col]);
+    writePinLow(col_pins[col]);
+}
+
+static void unselect_col(uint8_t col) {
+    setPinInputHigh(col_pins[col]);
+}
+
+static void unselect_cols(void) {
+    for (uint8_t x = 0; x < MATRIX_COLS/2; x++) {
+        setPinInputHigh(col_pins[x*2]);
+    }
+}
+
+static void read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
+    // Select row and wait for row selection to stabilize
+    select_row(current_row);
+    wait_us(MATRIX_IO_DELAY);
+
+    // For each col...
+    for (uint8_t col_index = 0; col_index < MATRIX_COLS / 2; col_index++) {
+        uint16_t column_index_bitmask = COL_SHIFTER << ((col_index * 2) + 1);
+        // Check row pin state
+        if (readPin(col_pins[col_index*2])) {
+            // Pin HI, clear col bit
+            current_matrix[current_row] &= ~column_index_bitmask;
+        } else {
+            // Pin LO, set col bit
+            current_matrix[current_row] |= column_index_bitmask;
+        }
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+}
+
+static void read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
+    // Select col and wait for col selection to stabilize
+    select_col(current_col*2);
+    wait_us(MATRIX_IO_DELAY);
+
+    uint16_t column_index_bitmask = COL_SHIFTER << (current_col * 2);
+    // For each row...
+    for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) {
+        // Check row pin state
+        if (readPin(row_pins[row_index])) {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~column_index_bitmask;
+        } else {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= column_index_bitmask;
+        }
+    }
+    // Unselect col
+    unselect_col(current_col*2);
+}
+
+
+void matrix_init_custom(void) {
+    // initialize key pins
+    unselect_cols();
+    unselect_rows();
+    debounce_init(MATRIX_ROWS);
+}
+
+void store_old_matrix(matrix_row_t current_matrix[]) {
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        previous_matrix[i] = current_matrix[i];
+    }
+}
+
+bool has_matrix_changed(matrix_row_t current_matrix[]) {
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (previous_matrix[i] != current_matrix[i]) return true;
+    }
+    return false;
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    store_old_matrix(current_matrix);
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+        read_cols_on_row(current_matrix, current_row);
+    }
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS/2; current_col++) {
+        read_rows_on_col(current_matrix, current_col);
+    }
+
+    fix_encoder_action(current_matrix);
+
+    fix_ghosting(current_matrix);
+
+    return has_matrix_changed(current_matrix);
+}
+

keyboards/cheapino/mcuconf.h

@@ -0,0 +1,4 @@
+#pragma once
+
+#include_next <mcuconf.h>
+

keyboards/cheapino/readme.md

@@ -0,0 +1,27 @@
+# cheapino
+
+![cheapino](imgur.com image replace me!)
+
+*A short description of the keyboard/project*
+
+* Keyboard Maintainer: [Thomas Haukland](https://github.com/tompi)
+* Hardware Supported: *The PCBs, controllers supported*
+* Hardware Availability: *Links to where you can find this hardware*
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cheapino:default
+
+Flashing example for this keyboard:
+
+    make cheapino:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

keyboards/cheapino/rules.mk

@@ -0,0 +1,8 @@
+CAPS_WORD_ENABLE = yes
+CUSTOM_MATRIX = lite
+WS2812_DRIVER = vendor
+RGBLIGHT_ENABLE = yes
+DEFERRED_EXEC_ENABLE = yes
+SRC += encoder.c
+SRC += ghosting.c
+SRC += matrix.c

keyboards/ferris/keymaps/tompi/config.h

@@ -16,6 +16,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #pragma once
+
+#define BOTH_SHIFTS_TURNS_ON_CAPS_WORD
+
 // Set the mouse settings to a comfortable speed/accuracy trade-off,
 // assuming a screen refresh rate of 60 Htz or higher
 // The default is 50. This makes the mouse ~3 times faster and more accurate

keyboards/ferris/keymaps/tompi/keymap.json

@@ -23,7 +23,7 @@
       "LSFT_T(KC_T)",
       "KC_G",
       "KC_M",
-      "LSFT_T(KC_N)",
+      "RSFT_T(KC_N)",
       "LCTL_T(KC_E)",
       "LALT_T(KC_I)",
       "LGUI_T(KC_O)",
@@ -59,10 +59,10 @@
       "KC_MS_R",
       "KC_MUTE",
       "KC_NO",
-      "KC_TRNS",
-      "KC_TRNS",
-      "KC_TRNS",
-      "KC_TRNS",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
       "KC_VOLD",
       "KC_MNXT",
       "KC_MS_D",
@@ -85,9 +85,9 @@
       "KC_PGUP",
       "KC_NO",
       "KC_NO",
-      "KC_NO",
-      "KC_NO",
-      "KC_NO",
+      "KC_BTN1",
+      "KC_BTN2",
+      "KC_BTN3",
       "KC_NO",
       "KC_NO",
       "KC_LEFT",
@@ -151,8 +151,8 @@
       "KC_TRNS"
     ],
     [
-      "KC_EQL",
-      "KC_COLN",
+      "KC_TILD",
+      "KC_EXLM",
       "KC_LT",
       "KC_GT",
       "KC_SCLN",
@@ -165,7 +165,7 @@
       "KC_RCBR",
       "KC_LPRN",
       "KC_RPRN",
-      "KC_AT",
+      "KC_PEQL",
       "KC_NO",
       "KC_TRNS",
       "KC_TRNS",
@@ -197,10 +197,10 @@
       "KC_F8",
       "KC_F9",
       "KC_F10",
-      "KC_TRNS",
-      "KC_TRNS",
-      "KC_TRNS",
-      "KC_TRNS",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
+      "KC_NO",
       "KC_NO",
       "KC_NO",
       "KC_F4",
@@ -229,9 +229,9 @@
       "KC_NO",
       "KC_NO",
       "KC_PPLS",
-      "KC_7",
-      "KC_8",
-      "KC_9",
+      "KC_P7",
+      "KC_P8",
+      "KC_P9",
       "KC_PAST",
       "KC_TRNS",
       "KC_TRNS",
@@ -239,9 +239,9 @@
       "KC_TRNS",
       "KC_NO",
       "KC_PMNS",
-      "KC_4",
-      "KC_5",
-      "KC_6",
+      "KC_P4",
+      "KC_P5",
+      "KC_P6",
       "KC_PSLS",
       "KC_NO",
       "KC_NO",
@@ -249,9 +249,9 @@
       "KC_NO",
       "KC_NO",
       "KC_PDOT",
-      "KC_1",
-      "KC_2",
-      "KC_3",
+      "KC_P1",
+      "KC_P2",
+      "KC_P3",
       "KC_PEQL",
       "KC_NO",
       "KC_NO",

keyboards/vonreg/config.h

@@ -20,7 +20,7 @@
 //#define SERIAL_USART_TX_PIN B6     // USART TX pin
 //#define SERIAL_USART_RX_PIN B7     // USART RX pin
 
-#define EE_HANDS
+//#define EE_HANDS
 
 #define SOFT_SERIAL_PIN B14  // D0 or D1, D2, D3, E6
 #define SELECT_SOFT_SERIAL_SPEED 2 // or 0, 2, 3, 4, 5
@@ -31,7 +31,8 @@
                                    //  4: about 26kbps
                                    //  5: about 20kbps
 
-
+ #define CRC8_USE_TABLE
+ #define CRC8_OPTIMIZE_SPEED
 /* Top left key on left half */
 #define BOOTMAGIC_LITE_ROW    0
 #define BOOTMAGIC_LITE_COLUMN 0
@@ -40,6 +41,6 @@
 #define BOOTMAGIC_LITE_COLUMN_RIGHT 4
 #define DEVICE_VER      0x0001
 
-#define AUDIO_PIN A1
+//#define AUDIO_PIN A1
 //#define AUDIO_PWM_DRIVER PWMD1
 //#define AUDIO_PWM_CHANNEL 1

keyboards/vonreg/keymaps/tompi/keymap.json

@@ -2,7 +2,7 @@
   "version": 1,
   "notes": "My awesome keymap",
   "documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs>\n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n",
-  "keyboard": "bastardkb/skeletyl",
+  "keyboard": "bastardkb/skeletyl/blackpill",
   "keymap": "default",
   "layout": "LAYOUT_split_3x5_3",
   "layers": [
@@ -23,7 +23,7 @@
       "LSFT_T(KC_T)",
       "KC_G",
       "KC_M",
-      "LSFT_T(KC_N)",
+      "RSFT_T(KC_N)",
       "LCTL_T(KC_E)",
       "LALT_T(KC_I)",
       "LGUI_T(KC_O)",

keyboards/vonreg/rules.mk

@@ -2,8 +2,8 @@ BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
 
 SPLIT_KEYBOARD = yes
 SERIAL_DRIVER = bitbang
-AUDIO_ENABLE = yes
-AUDIO_DRIVER = pwm_software
+#AUDIO_ENABLE = yes
+#AUDIO_DRIVER = pwm_software
 
 # Bootloader selection
 BOOTLOADER = stm32-dfu
@@ -11,3 +11,4 @@ BOOTLOADER = stm32-dfu
 CONSOLE_ENABLE = yes
 DEBOUNCE_TYPE          = asym_eager_defer_pk
 
+CAPS_WORD_ENABLE = yes

keyboards/zompi/config.h

@@ -0,0 +1,79 @@
+/*
+ * Copyright 2022 Thomas.Haukland@gmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "config_common.h"
+#define VENDOR_ID 0xA8F8
+#define PRODUCT_ID 0x1830
+#define DEVICE_VER 0x0001
+#define MANUFACTURER "tompi"
+#define PRODUCT "Zompi"
+
+#define SOFT_SERIAL_PIN GP0
+#define CRC8_USE_TABLE
+#define CRC8_OPTIMIZE_SPEED
+
+//#define MASTER_RIGHT
+
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 5
+#define MATRIX_ROW_PINS { GP9, GP10, GP4, GP5 }
+#define MATRIX_COL_PINS { GP6, GP7, GP8, GP11, GP12 }
+
+#ifdef OLED_ENABLE
+#    define OLED_DISPLAY_128X32
+#define I2C1_SCL_PIN        GP3
+#define I2C1_SDA_PIN        GP2
+#define I2C_DRIVER I2CD2
+#define OLED_BRIGHTNESS 128
+//#define OLED_FONT_H "keyboards/mlego/m65/lib/glcdfont.c"
+#endif
+
+
+#ifdef RGB_MATRIX_ENABLE
+#   define RGBLED_NUM 6
+#    define RGBLED_SPLIT { 3,3 }
+#    define RGB_DI_PIN GP14
+#    define DRIVER_LED_TOTAL 6
+
+     /* Enable Framebuffer and keypress effects */
+#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#    define RGB_MATRIX_KEYPRESSES
+
+#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_BREATHING
+#    define ENABLE_RGB_MATRIX_HUE_BREATHING
+#    define ENABLE_RGB_MATRIX_PIXEL_RAIN
+#    define ENABLE_RGB_MATRIX_PIXEL_FLOW
+#    define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#    define ENABLE_RGB_MATRIX_SPLASH
+#    define ENABLE_RGB_MATRIX_MULTISPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#endif

keyboards/zompi/halconf.h

@@ -0,0 +1,27 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/handwired/onekey/blackpill_f401/halconf.h -r platforms/chibios/common/configs/halconf.h`
+ */
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+
+#include_next <halconf.h>
+

keyboards/zompi/info.json

@@ -0,0 +1,73 @@
+{
+    "keyboard_name": "Zompi",
+    "url": "https://github.com/tompi/qmk_firmware/tree/develop",
+    "maintainer": "Thomas Haukland",
+    "bootloader": "rp2040",
+    "debounce": 5,
+    "diode_direction": "COL2ROW",
+    "encoder": {
+        "enabled": true,
+        "rotary": [
+            {
+                "pin_a": "GP24",
+                "pin_b": "GP25",
+                "resolution": 4
+            }
+        ]
+    },
+    "features": {
+        "audio": false,
+        "backlight": false,
+        "bootmagic": true,
+        "command": false,
+        "console": true,
+        "encoder": true,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "oled": true,
+        "wpm": true
+    },    
+    "layouts": {
+        "LAYOUT_split_3x5_3": {
+            "layout": [
+                {"label":"L00", "x":0, "y":0},
+                {"label":"L01", "x":1, "y":0},
+                {"label":"L02", "x":2, "y":0},
+                {"label":"L03", "x":3, "y":0},
+                {"label":"L04", "x":4, "y":0},
+                {"label":"R00", "x":11, "y":0},
+                {"label":"R01", "x":12, "y":0},
+                {"label":"R02", "x":13, "y":0},
+                {"label":"R03", "x":14, "y":0},
+                {"label":"R04", "x":15, "y":0},
+                {"label":"L10", "x":0, "y":1},
+                {"label":"L11", "x":1, "y":1},
+                {"label":"L12", "x":2, "y":1},
+                {"label":"L13", "x":3, "y":1},
+                {"label":"L14", "x":4, "y":1},
+                {"label":"R10", "x":11, "y":1},
+                {"label":"R11", "x":12, "y":1},
+                {"label":"R12", "x":13, "y":1},
+                {"label":"R13", "x":14, "y":1},
+                {"label":"R14", "x":15, "y":1},
+                {"label":"L20", "x":0, "y":2},
+                {"label":"L21", "x":1, "y":2},
+                {"label":"L22", "x":2, "y":2},
+                {"label":"L23", "x":3, "y":2},
+                {"label":"L24", "x":4, "y":2},
+                {"label":"R20", "x":11, "y":2},
+                {"label":"R21", "x":12, "y":2},
+                {"label":"R22", "x":13, "y":2},
+                {"label":"R23", "x":14, "y":2},
+                {"label":"R24", "x":15, "y":2},
+                {"label":"L33", "x":4, "y":3},
+                {"label":"L34", "x":5, "y":3},
+                {"label":"L31", "x":6, "y":3},
+                {"label":"R33", "x":9, "y":3},
+                {"label":"R34", "x":10, "y":3},
+                {"label":"R31", "x":11, "y":3}
+            ]
+        }
+    }
+}

keyboards/zompi/keymaps/default/keymap.c

@@ -0,0 +1,72 @@
+/* 
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [0] = LAYOUT_split_3x5_3(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                         KC_Y,    KC_U,    KC_I,    KC_O,   KC_P,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                         KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+   //   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                         KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH, 
+      RGB_MOD,    KC_X,    KC_C,    KC_V,    KC_B,                         KC_N,    KC_M, KC_COMM,  KC_DOT, RGB_MOD, 
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LGUI, KC_SPC  ,  MO(1),     MO(2), KC_ENT , KC_RALT
+                                      //`--------------------------'  `--------------------------'
+
+  ),
+
+  [1] = LAYOUT_split_3x5_3(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+      KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                         KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_LEFT, KC_DOWN,   KC_UP,KC_RIGHT, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LGUI, KC_SPC,  _______,     MO(3), KC_ENT, KC_RALT
+                                      //`--------------------------'  `--------------------------'
+  ),
+
+  [2] = LAYOUT_split_3x5_3(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+      KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC,                      KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_MINS,  KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LGUI,  KC_SPC,  MO(3),     _______, KC_ENT, KC_RALT
+                                      //`--------------------------'  `--------------------------'
+  ),
+
+  [3] = LAYOUT_split_3x5_3(
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LGUI,  KC_SPC, _______,     _______, KC_ENT, KC_RALT
+                                      //`--------------------------'  `--------------------------'
+  )
+};
+
+

keyboards/zompi/mcuconf.h

@@ -0,0 +1,6 @@
+#pragma once
+
+#include_next "mcuconf.h"
+
+#undef RP_I2C_USE_I2C1
+#define RP_I2C_USE_I2C1 TRUE

keyboards/zompi/readme.md

@@ -0,0 +1,11 @@
+# Zompi
+
+My experiment with qmk and the rp2040-zero.
+
+Blingy split keyboard using audio, leds and rotary encoders, because these
+things are essentials, right? 
+
+Make example for this keyboard (after setting up your build environment):
+
+    make zompi:default
+    

keyboards/zompi/rules.mk

@@ -0,0 +1,26 @@
+# MCU name
+MCU = RP2040
+
+# Bootloader selection
+BOOTLOADER = rp2040
+
+# Build Options
+#   change yes to no to disable
+#
+RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix (do not use together with RGBLIGHT_ENABLE)
+RGB_MATRIX_DRIVER = WS2812  # RGB matrix driver support
+WS2812_DRIVER = vendor
+SPLIT_KEYBOARD = yes
+LTO_ENABLE = yes
+
+AUDIO_SUPPORTED = no
+RGB_MATRIX_SUPPORTED = yes
+#RGBLIGHT_ENABLE = yes
+##BACKLIGHT_ENABLE = yes
+SERIAL_DRIVER = vendor
+
+LAYOUTS = split_3x5_3
+OLED_DRIVER = SSD1306
+
+ # Project specific files
+#QUANTUM_LIB_SRC += spi_master.c

keyboards/zompi/zompi.c

@@ -0,0 +1,158 @@
+/*
+ * Copyright 2022 Thomas.Haukland@gmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "zompi.h"
+
+#ifdef RGB_MATRIX
+ led_config_t g_led_config = { {
+     {  1,  2,  1,  1,  1 },
+     {  1,  2,  1,  1,  1 },
+     {  1,  2,  1,  1,  1 },
+     {  1,  2,  1,  1,  1 },
+     {  1,  2,  1,  1,  1 },
+     {  1,  2,  1,  1,  1 },
+     {  1,  2,  1,  1,  1 },
+     {  1,  2,  1,  1,  1 }
+ }, {
+     {  85,  16 }, {  50,  13 }, {  16,  20 }, {  16,  38 }, {  50,  48 }, {  85,  52 }
+ }, {
+     4, 4, 4, 4, 4, 4
+ } };
+#endif
+
+
+#ifdef OLED_ENABLE
+static void render_logo(void) {
+    static const char PROGMEM raw_logo[] = {
+        0x00, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8,
+0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x7c, 0xfe, 0xfe, 0xfe, 0xfc, 0x7c, 0x38, 0x00,
+0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0xc1, 0xe1, 0xf1, 0xf9, 0xfd, 0xff, 0xff, 0xff, 0xff, 0x7f,
+0x3f, 0x1f, 0x0f, 0x07, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc, 0xfc,
+0xfc, 0xfe, 0x7e, 0x7e, 0x7e, 0x3e, 0x7e, 0x7e, 0x7e, 0xfe, 0xfc, 0xfc, 0xfc, 0xf8, 0xf0, 0xe0,
+0xc0, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xf8, 0x7c, 0x7c, 0x3e,
+0x3e, 0x7e, 0xfe, 0xfe, 0xfe, 0xfe, 0xfc, 0xfc, 0xf8, 0xf8, 0xf8, 0x7c, 0x7c, 0x3e, 0x3e, 0x7e,
+0xfe, 0xfe, 0xfe, 0xfe, 0xfc, 0xfc, 0xf8, 0xe0, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0xfe, 0xfe,
+0xfe, 0xfe, 0xfe, 0xfc, 0x7c, 0x7e, 0x7e, 0x3e, 0x7e, 0x7e, 0x7e, 0xfe, 0xfe, 0xfc, 0xfc, 0xf8,
+0xf8, 0xf0, 0xe0, 0x80, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfc, 0x00,
+0xe0, 0xf0, 0xf8, 0xfc, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf7, 0xf3, 0xf0, 0xf0,
+0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0x00, 0x02, 0x1f, 0x3f, 0x7f, 0xff, 0xff, 0xff,
+0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xe0, 0xf0, 0xf0, 0xf0, 0xfd, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x3f,
+0x1f, 0x07, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
+0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xe0, 0xe0, 0xf0, 0xf0, 0xf8, 0xff, 0xff, 0xff, 0xff,
+0xff, 0x7f, 0x3f, 0x0f, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
+0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
+0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
+0x01, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x01, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
+0xff, 0xff, 0xff, 0xff, 0x01, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x01, 0x01, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00
+    };
+    oled_write_raw_P(raw_logo, sizeof(raw_logo));
+}
+
+enum layers {
+    _QWERTY = 0,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+static void render_status(void) {
+    render_logo();
+    return;
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+    switch (get_highest_layer(layer_state)) {
+        case _QWERTY:
+            oled_write_P(PSTR("Default\n"), false);
+            break;
+        case _LOWER:
+            oled_write_P(PSTR("Lower\n"), false);
+            break;
+        case _RAISE:
+            oled_write_P(PSTR("Raise\n"), false);
+            break;
+        case _ADJUST:
+            oled_write_P(PSTR("Adjust\n"), false);
+            break;
+        default:
+            oled_write_P(PSTR("Undefined\n"), false);
+    }
+
+    // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR("       "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR("       "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR("       "), false);
+}
+
+bool oled_task_kb(void) {
+  if (!oled_task_user()) { return false; }
+  if (is_keyboard_left()) {
+        render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_logo();
+    }
+    return true;
+}
+#endif
+
+/* The encoder_update_user is a function.
+ * It'll be called by QMK every time you turn the encoder.
+ *
+ * The index parameter tells you which encoder was turned. If you only have
+ * one encoder, the index will always be zero.
+ *
+ * The clockwise parameter tells you the direction of the encoder. It'll be
+ * true when you turned the encoder clockwise, and false otherwise.
+ */
+bool encoder_update_user(uint8_t index, bool clockwise) {
+  /* With an if statement we can check which encoder was turned. */
+  if (index == 0) { /* First encoder */
+    /* And with another if statement we can check the direction. */
+    if (clockwise) {
+      /* This is where the actual magic happens: this bit of code taps on the
+         Page Down key. You can do anything QMK allows you to do here.
+         You'll want to replace these lines with the things you want your
+         encoders to do. */
+      tap_code(KC_PGDN);
+    } else {
+      /* And likewise for the other direction, this time Page Down is pressed. */
+      tap_code(KC_PGUP);
+    }
+  /* You can copy the code and change the index for every encoder you have. Most
+     keyboards will only have two, so this piece of code will suffice. */
+  } else if (index == 1) { /* Second encoder */
+    if (clockwise) {
+      tap_code(KC_UP);
+    } else {
+      tap_code(KC_DOWN);
+    }
+  }
+  return false;
+}
+

keyboards/zompi/zompi.h

@@ -0,0 +1,39 @@
+/*
+ * Copyright 2022 Thomas.Haukland@gmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "quantum.h"
+
+// clang-format off
+#define LAYOUT_split_3x5_3(                             \
+  k00, k01, k02, k03, k04,     k44, k43, k42, k41, k40, \
+  k10, k11, k12, k13, k14,     k54, k53, k52, k51, k50, \
+  k20, k21, k22, k23, k24,     k64, k63, k62, k61, k60, \
+            k32, k33, k30,     k70, k73, k72            \
+)                                                       \
+{                                                       \
+  {   k00,   k01,   k02,   k03,   k04 },                \
+  {   k10,   k11,   k12,   k13,   k14 },                \
+  {   k20,   k21,   k22,   k23,   k24 },                \
+  {   k30, KC_NO,   k32,   k33, KC_NO },                \
+  {   k40,   k41,   k42,   k43,   k44 },                \
+  {   k50,   k51,   k52,   k53,   k54 },                \
+  {   k60,   k61,   k62,   k63,   k64 },                \
+  {   k70, KC_NO,   k72,   k73, KC_NO },                \
+}
+// clang-format on
+//