wip

Dockerfile

@@ -1,4 +1,4 @@
-FROM debian:9
+FROM debian
 
 RUN apt-get update && apt-get install --no-install-recommends -y \
     avr-libc \

Vagrantfile

@@ -6,7 +6,7 @@ Vagrant.configure(2) do |config|
   config.vm.define "qmk_firmware"
 
   # VMware/Virtualbox ( and also Hyperv/Parallels) 64 bit
-  config.vm.box = "generic/debian9"
+  config.vm.box = "bento/ubuntu-16.04"
 
   # This section allows you to customize the Virtualbox VM
   # settings, ie showing the GUI or upping the memory
@@ -55,7 +55,7 @@ Vagrant.configure(2) do |config|
   # image, you'll need to: chmod -R a+rw .
   config.vm.provider "docker" do |docker, override|
     override.vm.box = nil
-    docker.image = "jesselang/debian-vagrant:stretch"
+    docker.image = "jesselang/debian-vagrant:jessie"
     docker.has_ssh = true
   end
 

common_features.mk

@@ -308,16 +308,16 @@ ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
     OPT_DEFS += -DSPLIT_KEYBOARD
 
     # Include files used by all split keyboards
-    QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_util.c
+    QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
+                   $(QUANTUM_DIR)/split_common/split_util.c
 
     # Determine which (if any) transport files are required
     ifneq ($(strip $(SPLIT_TRANSPORT)), custom)
         QUANTUM_SRC += $(QUANTUM_DIR)/split_common/transport.c
         # Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called.
-        # Unused functions are pruned away, which is why we can add multiple drivers here without bloat.
-        QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/serial.c \
-                           i2c_master.c \
-                           i2c_slave.c
+        # Unused functions are pruned away, which is why we can add both drivers here without bloat.
+        QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/i2c.c \
+                           $(QUANTUM_DIR)/split_common/serial.c
     endif
     COMMON_VPATH += $(QUANTUM_PATH)/split_common
 endif

docs/_summary.md

@@ -3,7 +3,7 @@
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
-  * [Git Best Practices](newbs_best_practices.md)
+  * [Best Practices](newbs_best_practices.md)
   * [Learning Resources](newbs_learn_more_resources.md)
 
 * [QMK Basics](README.md)
@@ -92,8 +92,7 @@
   * [Understanding QMK](understanding_qmk.md)
 
 * Other Topics
-  * [Using Eclipse with QMK](other_eclipse.md)
-  * [Using VSCode with QMK](other_vscode.md)
+  * [Using Eclipse with QMK](eclipse.md)
   * [Support](support.md)
 
 * QMK Internals (In Progress)

docs/config_options.md

@@ -208,13 +208,9 @@ There are a few different ways to set handedness for split keyboards (listed in
 
 1. Set `SPLIT_HAND_PIN`: Reads a pin to determine handedness. If pin is high, it's the left side, if low, the half is determined to be the right side
 2. Set `EE_HANDS` and flash `eeprom-lefthand.eep`/`eeprom-righthand.eep` to each half
-   * For boards with DFU bootloader you can use `:dfu-split-left`/`:dfu-split-right` to flash these EEPROM files
-   * For boards with Caterina bootloader (like stock Pro Micros), use `:avrdude-split-left`/`:avrdude-split-right`
 3. Set `MASTER_RIGHT`: Half that is plugged into the USB port is determined to be the master and right half (inverse of the default)
 4. Default: The side that is plugged into the USB port is the master half and is assumed to be the left half. The slave side is the right half
 
-#### Defines for handedness
-
 * `#define SPLIT_HAND_PIN B7`
   * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace `B7` with the pin you are using. This is optional, and if you leave `SPLIT_HAND_PIN` undefined, then you can still use the EE_HANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
 

docs/custom_quantum_functions.md

@@ -116,29 +116,29 @@ Use the `IS_LED_ON(usb_led, led_name)` and `IS_LED_OFF(usb_led, led_name)` macro
 ```c
 void led_set_user(uint8_t usb_led) {
     if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        writePinLow(B0);
+        PORTB |= (1<<0);
     } else {
-        writePinHigh(B0);
+        PORTB &= ~(1<<0);
     }
     if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinLow(B1);
+        PORTB |= (1<<1);
     } else {
-        writePinHigh(B1);
+        PORTB &= ~(1<<1);
     }
     if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-        writePinLow(B2);
+        PORTB |= (1<<2);
     } else {
-        writePinHigh(B2);
+        PORTB &= ~(1<<2);
     }
     if (IS_LED_ON(usb_led, USB_LED_COMPOSE)) {
-        writePinLow(B3);
+        PORTB |= (1<<3);
     } else {
-        writePinHigh(B3);
+        PORTB &= ~(1<<3);
     }
     if (IS_LED_ON(usb_led, USB_LED_KANA)) {
-        writePinLow(B4);
+        PORTB |= (1<<4);
     } else {
-        writePinHigh(B4);
+        PORTB &= ~(1<<4);
     }
 }
 ```
@@ -189,18 +189,16 @@ However, if you have hardware stuff that you need initialized, this is the best
 
 ### Example `keyboard_pre_init_user()` Implementation
 
-This example, at the keyboard level, sets up B0, B1, B2, B3, and B4 as LED pins.
+This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
 
 ```c
 void keyboard_pre_init_user(void) {
   // Call the keyboard pre init code.
 
   // Set our LED pins as output
-  setPinOutput(B0);
-  setPinOutput(B1);
-  setPinOutput(B2);
-  setPinOutput(B3);
-  setPinOutput(B4);
+  DDRB |= (1<<1);
+  DDRB |= (1<<2);
+  DDRB |= (1<<3);
 }
 ```
 
@@ -272,13 +270,16 @@ This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_
 
 ### Example suspend_power_down_user() and suspend_wakeup_init_user() Implementation
 
+This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
 
 ```c
-void suspend_power_down_user(void) {
+void suspend_power_down_user(void)
+{
     rgb_matrix_set_suspend_state(true);
 }
 
-void suspend_wakeup_init_user(void) {
+void suspend_wakeup_init_user(void)
+{
     rgb_matrix_set_suspend_state(false);
 }
 ```
@@ -355,11 +356,11 @@ user_config_t user_config;
 
 This sets up a 32 bit structure that we can store settings with in memory, and write to the EEPROM. Using this removes the need to define variables, since they're defined in this structure. Remember that `bool` (boolean) values use 1 bit, `uint8_t` uses 8 bits, `uint16_t` uses up 16 bits.  You can mix and match, but changing the order can cause issues, as it will change the values that are read and written. 
 
-We're using `rgb_layer_change`, for the `layer_state_set_*` function, and use `keyboard_post_init_user` and `process_record_user` to configure everything. 
+We're using `rgb_layer_change`, for the `layer_state_set_*` function, and use `matrix_init_user` and `process_record_user` to configure everything. 
 
-Now, using the `keyboard_post_init_user` code above, you want to add `eeconfig_read_user()` to it, to populate the structure you've just created. And you can then immediately use this structure to control functionality in your keymap.  And It should look like: 
+Now, using the `matrix_init_user` code above, you want to add `eeconfig_read_user()` to it, to populate the structure you've just created. And you can then immediately use this structure to control functionality in your keymap.  And It should look like: 
 ```
-void keyboard_post_init_user(void) {
+void matrix_init_user(void) {
   // Call the keymap level matrix init.
 
   // Read the user config from EEPROM
@@ -446,7 +447,6 @@ And lastly, you want to add the `eeconfig_init_user` function, so that when the
 
 ```
 void eeconfig_init_user(void) {  // EEPROM is getting reset! 
-  user_config.raw = 0;
   user_config.rgb_layer_change = true; // We want this enabled by default
   eeconfig_update_user(user_config.raw); // Write default value to EEPROM now
 

docs/faq_build.md

@@ -15,7 +15,7 @@ or just:
 
     $ sudo make <keyboard>:<keymap>:dfu
 
-Note that running `make` with `sudo` is generally ***not*** a good idea, and you should use one of the former methods, if possible.
+Note that running `make` with `sudo` is generally *not* a good idea, and you should use one of the former methods, if possible.
 
 ### Linux `udev` Rules
 On Linux, you'll need proper privileges to access the MCU. You can either use
@@ -47,12 +47,7 @@ If you're using Windows to flash your keyboard, and you are running into issues,
 
 Re-running the installation script for MSYS2 may help (eg run `./util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue.
 
-If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUSB` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again.  If that doesn't work, try all of the options, until one works. 
-
-?> There isn't a best option for which driver should be used here.  Some options work better on some systems than others.  libUSB and WinUSB seem to be the best options here.
-
-If the bootloader doesn't show up in the list for devices, you may need to enable the "List all devices" option in the `Options` menu, and then find the bootloader in question. 
-
+If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUS(libusb-1.0)` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again.
 
 ## WINAVR is Obsolete
 It is no longer recommended and may cause some problem.

docs/feature_audio.md

@@ -100,16 +100,6 @@ In music mode, the following keycodes work differently, and don't pass through:
 * `KC_UP` - speed-up playback
 * `KC_DOWN` - slow-down playback
 
-The pitch standard (`PITCH_STANDARD_A`) is 440.0f by default - to change this, add something like this to your `config.h`:
-
-    #define PITCH_STANDARD_A 432.0f
-
-You can completely disable Music Mode as well. This is useful, if you're pressed for space on your controller.  To disable it, add this to your `config.h`:
-
-    #define NO_MUSIC_MODE
-
-### Music Mask
-
 By default, `MUSIC_MASK` is set to `keycode < 0xFF` which means keycodes less than `0xFF` are turned into notes, and don't output anything. You can change this by defining this in your `config.h` like this:
 
     #define MUSIC_MASK keycode != KC_NO
@@ -130,26 +120,13 @@ For a more advanced way to control which keycodes should still be processed, you
 
 Things that return false are not part of the mask, and are always processed.
 
-### Music Map
+The pitch standard (`PITCH_STANDARD_A`) is 440.0f by default - to change this, add something like this to your `config.h`:
 
-By default, the Music Mode uses the columns and row to determine the scale for the keys. For a board that uses a rectangular matrix that matches the keyboard layout, this is just fine.  However, for boards that use a more complicated matrix (such as the Planck Rev6, or many split keyboards) this would result in a very skewed experience.  
+    #define PITCH_STANDARD_A 432.0f
 
-However, the Music Map option allows you to remap the scaling for the music mode, so it fits the layout, and is more natural. 
+You can completely disable Music Mode as well. This is useful, if you're pressed for space on your controller.  To disable it, add this to your `config.h`:
 
-To enable this feature, add `#define MUSIC_MAP` to your `config.h` file, and then you will want to add a `uint8_t music_map` to your keyboard's `c` file, or your `keymap.c`.
-
-```c
-const uint8_t music_map[MATRIX_ROWS][MATRIX_COLS] = LAYOUT_ortho_4x12(
-	36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
-	24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35,
-	12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
-	 0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11
-);
-```
-
-You will want to use whichever `LAYOUT` macro that your keyboard uses here.  This maps it to the correct key location.  Start in  the bottom left of the keyboard layout, and  move to the right, and then upwards.  Fill in all the entries until you have a complete matrix.  
-
-You can look at the [Planck Keyboard](https://github.com/qmk/qmk_firmware/blob/e9ace1487887c1f8b4a7e8e6d87c322988bec9ce/keyboards/planck/planck.c#L24-L29) as an example of how to implement this. 
+    #define NO_MUSIC_MODE
 
 ## Audio Click
 

docs/feature_macros.md

@@ -146,59 +146,9 @@ send_string(my_str);
 SEND_STRING(".."SS_TAP(X_END));
 ```
 
+## The Old Way: `MACRO()` & `action_get_macro`
 
-## Advanced Macro Functions
-
-There are some functions you may find useful in macro-writing. Keep in mind that while you can write some fairly advanced code within a macro, if your functionality gets too complex you may want to define a custom keycode instead. Macros are meant to be simple.
-
-### `record->event.pressed`
-
-This is a boolean value that can be tested to see if the switch is being pressed or released. An example of this is
-
-```c
-    if (record->event.pressed) {
-        // on keydown
-    } else {
-        // on keyup
-    }
-```
-
-### `register_code(<kc>);`
-
-This sends the `<kc>` keydown event to the computer. Some examples would be `KC_ESC`, `KC_C`, `KC_4`, and even modifiers such as `KC_LSFT` and `KC_LGUI`.
-
-### `unregister_code(<kc>);`
-
-Parallel to `register_code` function, this sends the `<kc>` keyup event to the computer. If you don't use this, the key will be held down until it's sent.
-
-### `tap_code(<kc>);`
-
-This will send `register_code(<kc>)` and then `unregister_code(<kc>)`. This is useful if you want to send both the press and release events ("tap" the key, rather than hold it).
-
-If you're having issues with taps (un)registering, you can add a delay between the register and unregister events by setting `#define TAP_CODE_DELAY 100` in your `config.h` file. The value is in milliseconds.
-
-### `register_code16(<kc>);`, `unregister_code16(<kc>);` and `tap_code16(<kc>);`
-
-These functions work similar to their regular counterparts, but allow you to use modded keycodes (with Shift, Alt, Control, and/or GUI applied to them).
-
-Eg, you could use `register_code16(S(KC_5));` instead of registering the mod, then registering the keycode.
-
-### `clear_keyboard();`
-
-This will clear all mods and keys currently pressed.
-
-### `clear_mods();`
-
-This will clear all mods currently pressed.
-
-### `clear_keyboard_but_mods();`
-
-This will clear all keys besides the mods currently pressed.
-
-
-##  **(DEPRECATED)** The Old Way: `MACRO()` & `action_get_macro`
-
-!> This is inherited from TMK, and hasn't been updated - it's recommended that you use `SEND_STRING` and `process_record_user` instead.
+?> This is inherited from TMK, and hasn't been updated - it's recommend that you use `SEND_STRING` and `process_record_user` instead.
 
 By default QMK assumes you don't have any macros. To define your macros you create an `action_get_macro()` function. For example:
 
@@ -272,8 +222,49 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 ```
 
+## Advanced Macro Functions
 
-### Advanced Example: Single-Key Copy/Paste
+There are some functions you may find useful in macro-writing. Keep in mind that while you can write some fairly advanced code within a macro if your functionality gets too complex you may want to define a custom keycode instead. Macros are meant to be simple.
+
+### `record->event.pressed`
+
+This is a boolean value that can be tested to see if the switch is being pressed or released. An example of this is
+
+```c
+    if (record->event.pressed) {
+        // on keydown
+    } else {
+        // on keyup
+    }
+```
+
+### `register_code(<kc>);`
+
+This sends the `<kc>` keydown event to the computer. Some examples would be `KC_ESC`, `KC_C`, `KC_4`, and even modifiers such as `KC_LSFT` and `KC_LGUI`.
+
+### `unregister_code(<kc>);`
+
+Parallel to `register_code` function, this sends the `<kc>` keyup event to the computer. If you don't use this, the key will be held down until it's sent.
+
+### `tap_code(<kc>);`
+
+This will send `register_code(<kc>)` and then `unregister_code(<kc>)`. This is useful if you want to send both the press and release events ("tap" the key, rather than hold it).
+
+If you're having issues with taps (un)registering, you can add a delay between the register and unregister events by setting `#define TAP_CODE_DELAY 100` in your `config.h` file. The value is in milliseconds.
+
+### `clear_keyboard();`
+
+This will clear all mods and keys currently pressed.
+
+### `clear_mods();`
+
+This will clear all mods currently pressed.
+
+### `clear_keyboard_but_mods();`
+
+This will clear all keys besides the mods currently pressed.
+
+## Advanced Example: Single-Key Copy/Paste
 
 This example defines a macro which sends `Ctrl-C` when pressed down, and `Ctrl-V` when released.
 

docs/feature_rgb_matrix.md

@@ -147,7 +147,6 @@ These are the effects that are currently available:
 	    RGB_MATRIX_DIGITAL_RAIN,
 	#ifdef RGB_MATRIX_KEYPRESSES
 	    RGB_MATRIX_SOLID_REACTIVE,
-	    RGB_MATRIX_REACTIVE_SIMPLE,
 	    RGB_MATRIX_SPLASH,
 	    RGB_MATRIX_MULTISPLASH,
 	    RGB_MATRIX_SOLID_SPLASH,
@@ -174,7 +173,6 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 |`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`   |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS`   |
 |`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN`          |Disables `RGB_MATRIX_DIGITAL_RAIN`          |
 |`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE`        |Disables `RGB_MATRIX_SOLID_REACTIVE`        |
-|`#define DISABLE_RGB_MATRIX_REACTIVE_SIMPLE`       |Disables `RGB_MATRIX_REACTIVE_SIMPLE`       |
 |`#define DISABLE_RGB_MATRIX_SPLASH`                |Disables `RGB_MATRIX_SPLASH`                |
 |`#define DISABLE_RGB_MATRIX_MULTISPLASH`           |Disables `RGB_MATRIX_MULTISPLASH`           |
 |`#define DISABLE_RGB_MATRIX_SOLID_SPLASH`          |Disables `RGB_MATRIX_SOLID_SPLASH`          |

docs/flashing.md

@@ -49,18 +49,9 @@ To generate this bootloader, use the `bootloader` target, eg `make planck/rev4:d
 
 To generate a production-ready .hex file (containing the application and the bootloader), use the `production` target, eg `make planck/rev4:default:production`.
 
-### DFU commands
-
-There are a number of DFU commands that you can use to flash firmware to a DFU device:
-
-* `:dfu` - This is the normal option and waits until a DFU device is available, and then flashes the firmware. This will check every 5 seconds, to see if a DFU device has appeared.
-* `:dfu-ee` - This flashes an `eep` file instead of the normal hex.  This is uncommon. 
-* `:dfu-split-left` - This flashes the normal firmware, just like the default option (`:dfu`). However, this also flashes the "Left Side" EEPROM file for split keyboards. _This is ideal for Elite C based split keyboards._
-* `:dfu-split-right` - This flashes the normal firmware, just like the default option (`:dfu`). However, this also flashes the "Right Side" EEPROM file for split keyboards. _This is ideal for Elite C based split keyboards._
-
 ## Caterina
 
-Arduino boards and their clones use the [Caterina bootloader](https://github.com/arduino/ArduinoCore-avr/tree/master/bootloaders/caterina) (any keyboard built with a Pro Micro, or clone), and uses the avr109 protocol to communicate through virtual serial. Bootloaders like [A-Star](https://www.pololu.com/docs/0J61/9) are based on Caterina.
+Arduino boards and their clones use the [Caterina bootloader](https://github.com/arduino/Arduino/tree/master/hardware/arduino/avr/bootloaders/caterina) (any keyboard built with a Pro Micro, or clone), and uses the avr109 protocol to communicate through virtual serial. Bootloaders like [A-Star](https://www.pololu.com/docs/0J61/9) are based on Caterina.
 
 To ensure compatibility with the Caterina bootloader, make sure this block is present your `rules.mk`:
 
@@ -93,7 +84,6 @@ or if you want to flash multiple boards, use the following command
 
 When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
 
-
 ## Halfkay
 
 Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on all Teensys (namely the 2.0).
@@ -141,12 +131,3 @@ Flashing sequence:
     * You will receive a warning about the DFU signature; Just ignore it
 4. Reset the device into application mode (may be done automatically)
     * If you are building from command line (e.g. `make planck/rev6:default:dfu-util`), make sure that `:leave` is passed to the `DFU_ARGS` variable inside your `rules.mk` (e.g. `DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave`) so that your device resets after flashing
-
-### STM32 Commands
-
-There are a number of DFU commands that you can use to flash firmware to a STM32 device:
-
-* `:dfu-util` - The default command for flashing to STM32 devices. 
-* `:dfu-util-wait` - This works like the default command, but it gives you a (configurable) 10 second timeout before it attempts to flash the firmware.  You can use `TIME_DELAY=20` from the command line to change the timeout.
-   * Eg: `make <keyboard>:<keymap>:dfu-util TIME_DELAY=5`
-* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. 

docs/how_keyboards_work.md

@@ -12,7 +12,7 @@ place:
 ``` text
 +------+         +-----+       +----------+      +----------+     +----+
 | User |-------->| Key |------>| Firmware |----->| USB wire |---->| OS |
-+------+         +-----+       +----------+      +----------+     +----+
++------+         +-----+       +----------+      +----------+     |----+
 ```
 
 This scheme is a very simple view of what's going on, and more details follow

docs/i2c_driver.md

@@ -12,7 +12,7 @@ The I2C Master drivers used in QMK have a set of common functions to allow porta
 |`uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                         |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. |
 |`uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`       |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written.                                                                          |
 |`uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`        |Same as the `i2c_receive` function but `regaddr` sets from where in the slave the data will be read.                                                                         |
-|`uint8_t i2c_stop(void);`                                                                                         |Ends an I2C transaction.                                                                                                                                                     |
+|`uint8_t i2c_stop(uint16_t timeout);`                                                                             |Stops the I2C driver.                                                                                                                                                        |
 
 ### Function Return
 

docs/keymap.md

@@ -161,6 +161,62 @@ Some interesting things to note:
 * We have used our `_______` definition to turn `KC_TRNS` into `_______`. This makes it easier to spot the keys that have changed on this layer.
 * While in this layer if you press one of the `_______` keys it will activate the key in the next lowest active layer.
 
+### Custom Functions
+
+At the bottom of the file we've defined a single custom function. This function defines a key that sends `KC_ESC` when pressed without modifiers and `KC_GRAVE` when modifiers are held. There are a couple pieces that need to be in place for this to work, and we will go over both of them.
+
+#### `fn_actions[]`
+
+We define the `fn_actions[]` array to point to custom functions. `F(N)` in a keymap will call element N of that array. For the Clueboard's that looks like this:
+
+    const uint16_t PROGMEM fn_actions[] = {
+      [0] = ACTION_FUNCTION(0),  // Calls action_function()
+    };
+
+In this case we've instructed QMK to call the `ACTION_FUNCTION` callback, which we will define in the next section.
+
+> This `fn_actions[]` interface is mostly for backward compatibility.  In QMK, you don't need to use `fn_actions[]`.  You can directly use `ACTION_FUNCTION(N)` or any other action code value itself normally generated by the macro in `keymaps[][MATRIX_ROWS][MATRIX_COLS]`.  N in `F(N)` can only be 0 to 31.  Use of the action code directly in `keymaps` unlocks this limitation.
+
+You can get a full list of Action Functions in [action_code.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/action_code.h). 
+
+#### `action_function()`
+
+To actually handle the keypress event we define an `action_function()`. This function will be called when the key is pressed, and then again when the key is released. We have to handle both situations within our code, as well as determining whether to send/release `KC_ESC` or `KC_GRAVE`.
+
+    void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+      static uint8_t mods_pressed;
+
+      switch (id) {
+        case 0:
+          /* Handle the combined Grave/Esc key
+           */
+          mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
+
+          if (record->event.pressed) {
+            /* The key is being pressed.
+             */
+            if (mods_pressed) {
+              add_key(KC_GRV);
+              send_keyboard_report();
+            } else {
+              add_key(KC_ESC);
+              send_keyboard_report();
+            }
+          } else {
+            /* The key is being released.
+             */
+            if (mods_pressed) {
+              del_key(KC_GRV);
+              send_keyboard_report();
+            } else {
+              del_key(KC_ESC);
+              send_keyboard_report();
+            }
+          }
+          break;
+      }
+    }
+
 # Nitty Gritty Details
 
 This should have given you a basic overview for creating your own keymap. For more details see the following resources:

docs/newbs_flashing.md

@@ -131,16 +131,6 @@ If you have any issues with this, you may need to this:
 
     sudo make <my_keyboard>:<my_keymap>:dfu
 
-#### DFU commands
-
-There are a number of DFU commands that you can use to flash firmware to a DFU device:
-
-* `:dfu` - This is the normal option and waits until a DFU device is available, and then flashes the firmware. This will check every 5 seconds, to see if a DFU device has appeared.
-* `:dfu-ee` - This flashes an `eep` file instead of the normal hex.  This is uncommon. 
-* `:dfu-split-left` - This flashes the normal firmware, just like the default option (`:dfu`). However, this also flashes the "Left Side" EEPROM file for split keyboards. _This is ideal for Elite C based split keyboards._
-* `:dfu-split-right` - This flashes the normal firmware, just like the default option (`:dfu`). However, this also flashes the "Right Side" EEPROM file for split keyboards. _This is ideal for Elite C based split keyboards._
-
-
 ### Caterina 
 
 For Arduino boards and their clones (such as the SparkFun ProMicro), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
@@ -209,14 +199,6 @@ If you have any issues with this, you may need to this:
 
     sudo make <my_keyboard>:<my_keymap>:avrdude
 
-
-Additionally, if you want to flash multiple boards, use the following command:
-
-    make <keyboard>:<keymap>:avrdude-loop
-
-When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
-
-
 ## HalfKay
 
 For the PJRC devices (Teensy's), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
@@ -244,61 +226,12 @@ Waiting for Teensy device...
 
  ```
  Found HalfKay Bootloader
-Read "./.build/ergodox_ez_xyverz.hex": 28532 bytes, 88.5% usage
+Read "./.build/ergodox_ez_drashna.hex": 28532 bytes, 88.5% usage
 Programming............................................................................................................................................................................
 ...................................................
 Booting
 ```
 
-## STM32 (ARM)
-
-For a majority of ARM boards (including the Proton C, Planck Rev 6, and Preonic Rev 3), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
-
-    make <my_keyboard>:<my_keymap>:dfu-util
-
-For example, if your keymap is named "xyverz" and you're building a keymap for the Planck Revision 6 keyboard, you'll use this command and then reboot the keyboard to the bootloader (before it finishes compiling):
-
-    make planck/rev6:xyverz:dfu-util
-
-Once the firmware finishes compiling, it will output something like this: 
-
-```
-Linking: .build/planck_rev6_xyverz.elf                                                             [OK]
-Creating binary load file for flashing: .build/planck_rev6_xyverz.bin                               [OK]
-Creating load file for flashing: .build/planck_rev6_xyverz.hex                                     [OK]
-
-Size after:
-   text    data     bss     dec     hex filename
-      0   41820       0   41820    a35c .build/planck_rev6_xyverz.hex
-
-Copying planck_rev6_xyverz.bin to qmk_firmware folder                                              [OK]
-dfu-util 0.9
-
-Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
-Copyright 2010-2016 Tormod Volden and Stefan Schmidt
-This program is Free Software and has ABSOLUTELY NO WARRANTY
-Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
-
-Invalid DFU suffix signature
-A valid DFU suffix will be required in a future dfu-util release!!!
-Opening DFU capable USB device...
-ID 0483:df11
-Run-time device DFU version 011a
-Claiming USB DFU Interface...
-Setting Alternate Setting #0 ...
-Determining device status: state = dfuERROR, status = 10
-dfuERROR, clearing status
-Determining device status: state = dfuIDLE, status = 0
-dfuIDLE, continuing
-DFU mode device DFU version 011a
-Device returned transfer size 2048
-DfuSe interface name: "Internal Flash  "
-Downloading to address = 0x08000000, size = 41824
-Download        [=========================] 100%        41824 bytes
-Download done.
-File downloaded successfully
-Transitioning to dfuMANIFEST state
-```
 
 ## Test It Out!
 

docs/newbs_getting_started.md

@@ -66,10 +66,8 @@ You will need to install Git. It's very likely that you already have it, but if
 
 Once you have set up your Linux/Unix environment, you are ready to download QMK. We will do this by using Git to "clone" the QMK repository. Open a Terminal or MSYS2 MinGW window and leave it open for the remainder of this guide. Inside that window run these two commands:
 
-```shell
-git clone --recurse-submodules https://github.com/qmk/qmk_firmware.git
-cd qmk_firmware
-```
+    git clone https://github.com/qmk/qmk_firmware.git
+    cd qmk_firmware
 
 ?> If you already know [how to use GitHub](getting_started_github.md), we recommend that you create and clone your own fork instead. If you don't know what that means, you can safely ignore this message.
 

docs/other_vscode.md

@@ -1,117 +0,0 @@
-# Setting up Visual Studio Code for QMK Development
-
-[Visual Studio Code](https://code.visualstudio.com/) (VS Code) is an open-source code editor that supports many different programming languages. 
-
-Using a full-featured editor such as VS Code provides many advantages over a plain text editor, such as:
-* intelligent code completion
-* convenient navigation in the code
-* refactoring tools
-* build automation (no need for the command-line)
-* a graphical front end for GIT
-* many other tools such as debugging, code formatting, showing call hierarchies etc.
-
-The purpose of this page is to document how to set up VS Code for developing QMK Firmware.
-
-This guide covers how to configure everything needed on Windows and Ubuntu 18.04
-
-# Set up VS Code
-Before starting, you will want to make sure that you have all of the build tools set up, and QMK Firmware cloned. Head to the the [Newbs Getting Started Guide](newbs_getting_started.md) to get things set up, if you haven't already.
-
-## Windows
-
-### Prerequisites
-
-* [Git for Windows](https://git-scm.com/download/win) (This link will prompt to save/run the installer)
-  
-  1. Disable all of the options but `Git LFS (Large File Support)` and `Check daily for Git for Windows updates`. 
-  2. Set the default editor to `Use Visual Studio Code as Git's default editor`
-  3. Select the `Use Git from Git Bash only` option, since that's the option that you should use here.
-  4. For the `Choosing HTTPS transport backend`, either option should be fine.
-  5. Select the `Checkout as-is, commit Unix-style line endings` option. QMK Firmware uses Unix style commits.
-  6. For the extra options, leave the default options as is. 
-
-  This software is needed for Git support in VS Code. It may be possible to not include this, but it is much simpler to just use this. 
-
-* [Git Credential Manager for Windows](https://github.com/Microsoft/Git-Credential-Manager-for-Windows/releases) (Optional) 
-
-  This software provides better support for Git by providing secure storage for git credentials, MFA and personal access token generation. 
-  
-  This isn't strictly needed, but we would recommend it. 
-
-
-### Installing VS Code
-
-1. Head to [VS Code](https://code.visualstudio.com/) and download the installer
-2. Run the installer
-
-This part is super simple.  However, there is some configuration that we need to do to ensure things are configured correctly.
-
-### Configuring VS Code
-
-First, we need to set up IntelliSense. This isn't strictly required, but it will make your life a LOT easier. To do this, we need to create the `.vscode/c_cpp_properies.json` file in the QMK Firmware folder, You can do this all manually, but I've done most of the work already. 
-
-Grab [this file](https://gist.github.com/drashna/48e2c49ce877be592a1650f91f8473e8) and save it.  You may need to edit this file, if you didn't install MSYS2 to the default location, or are using WSL/LxSS.  
-
-Once you have saved this file, you will need to reload VS Code, if it was already running. 
-
-?> You should see an `extensions.json` and `settings.json` file in the `.vscode` folder, as well.
-
-
-Now, we will set up the MSYS2 window to show up in VSCode as the integrated terminal.  This has a number of advantages. Mostly, you can control+click on errors and jump to those files.  This makes debugging much easier.  It's also nice, in that you don't have to jump to another window. 
-
-1. Click <kbd><kbd>File</kbd> > <kbd>Preferences ></kbd> > <kbd>Settings</kbd> </kbd>
-2. Click on the <kbd>{}</kbd> button, in the top right to open the `settings.json` file. 
-3. Set the file's content to: 
-
-   ```json
-   {
-        "terminal.integrated.shell.windows": "C:\\msys64\\usr\\bin\\bash.exe",
-        "terminal.integrated.env.windows": {
-            "MSYSTEM": "MINGW64",
-            "CHERE_INVOKING": "1"
-        },
-        "terminal.integrated.shellArgs.windows": [
-            "--login"
-        ],
-        "terminal.integrated.cursorStyle": "line"
-    }
-    ```
-
-   If there are settings here already, then just add everything between the first and last curly brackets.  
-
-?> If you installed MSYS2 to a different folder, then you'll need to change the path for `terminal.integrated.shell.windows` to the correct path for your system. 
-
-4. Hit Ctrl-` (grave) to bring up the terminal.  
-
-   This should start the terminal in the workspace's folder (so the `qmk_firmware` folder), and then you can compile your keyboard. 
-
-
-## Every other Operating System
-
-1. Head to [VS Code](https://code.visualstudio.com/) and download the installer
-2. Run the installer
-3. That's it
-
-No, really, that's it.  The paths needed are already included when installing the packages, and it is much better about detecting the current workspace files and parsing them for IntelliSense. 
-
-## Plugins
-
-There are a number of extensions that you may want to install:
-
-* [Git Extension Pack](https://marketplace.visualstudio.com/items?itemName=donjayamanne.git-extension-pack) - 
-This installs a bunch of Git related tools that may make using Git with QMK Firmware easier.
-* [EditorConfig for VS Code](https://marketplace.visualstudio.com/items?itemName=EditorConfig.EditorConfig) - _[Optional]_ -  Helps to keep the code to the QMK Coding Conventions.
-* [Bracket Pair Colorizer 2](https://marketplace.visualstudio.com/items?itemName=CoenraadS.bracket-pair-colorizer-2) - _[Optional]_ - This color codes the brackets in your code, to make it easier to reference nested code.
-* [Github Markdown Preview](https://marketplace.visualstudio.com/items?itemName=bierner.github-markdown-preview) - _[Optional]_ - Makes the markdown preview in VS Code more like GitHub's.
-* [VS Live Share Extension Pack](https://marketplace.visualstudio.com/items?itemName=MS-vsliveshare.vsliveshare-pack) - _[Optional]_ - This extension allows somebody else to access your workspace (or you to access somebody else's workspace) and help out.  This is great if you're having issues and need some help from somebody.
-* [VIM Keymap](https://marketplace.visualstudio.com/items?itemName=GiuseppeCesarano.vim-keymap) - _[Optional]_ - For those that prefer VIM style keybindings. There are other options for this, too. 
-* [Travis CI Status](https://marketplace.visualstudio.com/items?itemName=felixrieseberg.vsc-travis-ci-status) - _[Optional]_ - This shows the current Travis CI status, if you have it set up.
-
-Restart once you've installed any extensions
-
-# Configure VS Code for QMK
-1. Click <kbd><kbd>File</kbd> > <kbd>Open Folder</kbd></kbd>
-2. Open the QMK Firmware folder that you cloned from GitHub. 
-3. Click <kbd><kbd>File</kbd> > <kbd>Save Workspace As...</kbd></kbd>
-
-And now you're ready to code QMK Firmware in VS Code

docs/understanding_qmk.md

@@ -135,11 +135,9 @@ The `process_record()` function itself is deceptively simple, but hidden within
 * [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/action.c#L172)
   * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L206)
     * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L226)
-    * [`void velocikey_accelerate(void)`](https://github.com/qmk/qmk_firmware/blob/c1c5922aae7b60b7c7d13d3769350eed9dda17ab/quantum/velocikey.c#L27)
     * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L119)
     * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_key_lock.c#L62)
     * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_clicky.c#L79)
-    * [`bool process_haptic(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/2cee371bf125a6ec541dd7c5a809573facc7c456/drivers/haptic/haptic.c#L216)
     * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20)
       * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
     * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/rgb_matrix.c#L139)

drivers/arm/i2c_master.c

@@ -65,11 +65,13 @@ uint8_t i2c_start(uint8_t address)
   return 0;
 }
 
-uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
+int8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
 {
+  //xprintf("i2c_transmit(0x%x, 0x%x, %d, 0x%x) address:0x%x\n", address, data, length, timeout, address >> 1);
   i2c_address = address;
   i2cStart(&I2C_DRIVER, &i2cconfig);
-  return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
+  int8_t result = i2cMasterTransmitTimeout(&I2C_DRIVER, i2c_address, data, length, 0, 0, MS2ST(timeout));
+  return result;
 }
 
 uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
@@ -101,7 +103,8 @@ uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t l
   return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout));
 }
 
-uint8_t i2c_stop(void)
+// This is usually not needed. It releases the driver to allow pins to become GPIO again.
+uint8_t i2c_stop(uint16_t timeout)
 {
   i2cStop(&I2C_DRIVER);
   return 0;

drivers/arm/i2c_master.h

@@ -42,9 +42,9 @@
 
 void i2c_init(void);
 uint8_t i2c_start(uint8_t address);
-uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+int8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length);
 uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-uint8_t i2c_stop(void);
+uint8_t i2c_stop(uint16_t timeout);

drivers/avr/i2c_master.c

@@ -7,44 +7,43 @@
 
 #include "i2c_master.h"
 #include "timer.h"
-#include "wait.h"
 
 #ifndef F_SCL
-#  define F_SCL 400000UL  // SCL frequency
+#define F_SCL 400000UL // SCL frequency
 #endif
 #define Prescaler 1
-#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16) / 2)
+#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
 
-void i2c_init(void) {
-  TWSR = 0; /* no prescaler */
+void i2c_init(void)
+{
+  TWSR = 0;     /* no prescaler */
   TWBR = (uint8_t)TWBR_val;
 }
 
-i2c_status_t i2c_start(uint8_t address, uint16_t timeout) {
+i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
+{
   // reset TWI control register
   TWCR = 0;
   // transmit START condition
-  TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
+  TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
 
   uint16_t timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
+  while( !(TWCR & (1<<TWINT)) ) {
     if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
       return I2C_STATUS_TIMEOUT;
     }
   }
 
   // check if the start condition was successfully transmitted
-  if (((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)) {
-    return I2C_STATUS_ERROR;
-  }
+  if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return I2C_STATUS_ERROR; }
 
   // load slave address into data register
   TWDR = address;
   // start transmission of address
-  TWCR = (1 << TWINT) | (1 << TWEN);
+  TWCR = (1<<TWINT) | (1<<TWEN);
 
   timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
+  while( !(TWCR & (1<<TWINT)) ) {
     if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
       return I2C_STATUS_TIMEOUT;
     }
@@ -52,39 +51,38 @@ i2c_status_t i2c_start(uint8_t address, uint16_t timeout) {
 
   // check if the device has acknowledged the READ / WRITE mode
   uint8_t twst = TW_STATUS & 0xF8;
-  if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-    return I2C_STATUS_ERROR;
-  }
+  if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return I2C_STATUS_ERROR;
 
   return I2C_STATUS_SUCCESS;
 }
 
-i2c_status_t i2c_write(uint8_t data, uint16_t timeout) {
+i2c_status_t i2c_write(uint8_t data, uint16_t timeout)
+{
   // load data into data register
   TWDR = data;
   // start transmission of data
-  TWCR = (1 << TWINT) | (1 << TWEN);
+  TWCR = (1<<TWINT) | (1<<TWEN);
 
   uint16_t timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
+  while( !(TWCR & (1<<TWINT)) ) {
     if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
       return I2C_STATUS_TIMEOUT;
     }
   }
 
-  if ((TW_STATUS & 0xF8) != TW_MT_DATA_ACK) {
-    return I2C_STATUS_ERROR;
-  }
+  if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return I2C_STATUS_ERROR; }
 
   return I2C_STATUS_SUCCESS;
 }
 
-int16_t i2c_read_ack(uint16_t timeout) {
+int16_t i2c_read_ack(uint16_t timeout)
+{
+
   // start TWI module and acknowledge data after reception
-  TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
 
   uint16_t timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
+  while( !(TWCR & (1<<TWINT)) ) {
     if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
       return I2C_STATUS_TIMEOUT;
     }
@@ -94,12 +92,14 @@ int16_t i2c_read_ack(uint16_t timeout) {
   return TWDR;
 }
 
-int16_t i2c_read_nack(uint16_t timeout) {
+int16_t i2c_read_nack(uint16_t timeout)
+{
+
   // start receiving without acknowledging reception
-  TWCR = (1 << TWINT) | (1 << TWEN);
+  TWCR = (1<<TWINT) | (1<<TWEN);
 
   uint16_t timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
+  while( !(TWCR & (1<<TWINT)) ) {
     if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
       return I2C_STATUS_TIMEOUT;
     }
@@ -109,89 +109,115 @@ int16_t i2c_read_nack(uint16_t timeout) {
   return TWDR;
 }
 
-i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
+i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
+{
   i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
+  if (status) return status;
 
-  for (uint16_t i = 0; i < length && status >= 0; i++) {
+  for (uint16_t i = 0; i < length; i++) {
     status = i2c_write(data[i], timeout);
+    if (status) return status;
   }
 
-  i2c_stop();
+  status = i2c_stop(timeout);
+  if (status) return status;
 
-  return status;
+  return I2C_STATUS_SUCCESS;
 }
 
-i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
+i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
+{
   i2c_status_t status = i2c_start(address | I2C_READ, timeout);
+  if (status) return status;
 
-  for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
+  for (uint16_t i = 0; i < (length-1); i++) {
     status = i2c_read_ack(timeout);
     if (status >= 0) {
       data[i] = status;
+    } else {
+      return status;
     }
   }
 
-  if (status >= 0) {
-    status = i2c_read_nack(timeout);
-    if (status >= 0) {
-      data[(length - 1)] = status;
-    }
+  status = i2c_read_nack(timeout);
+  if (status >= 0 ) {
+    data[(length-1)] = status;
+  } else {
+    return status;
   }
 
-  i2c_stop();
+  status = i2c_stop(timeout);
+  if (status) return status;
 
-  return (status < 0) ? status : I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
-i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
+i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+{
   i2c_status_t status = i2c_start(devaddr | 0x00, timeout);
-  if (status >= 0) {
-    status = i2c_write(regaddr, timeout);
-
-    for (uint16_t i = 0; i < length && status >= 0; i++) {
-      status = i2c_write(data[i], timeout);
-    }
-  }
-
-  i2c_stop();
-
-  return status;
-}
-
-i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
-  i2c_status_t status = i2c_start(devaddr, timeout);
-  if (status < 0) {
-    goto error;
-  }
+  if (status) return status;
 
   status = i2c_write(regaddr, timeout);
-  if (status < 0) {
-    goto error;
+  if (status) return status;
+
+  for (uint16_t i = 0; i < length; i++) {
+    status = i2c_write(data[i], timeout);
+    if (status) return status;
   }
 
-  status = i2c_start(devaddr | 0x01, timeout);
+  status = i2c_stop(timeout);
+  if (status) return status;
 
-  for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
+  return I2C_STATUS_SUCCESS;
+}
+
+i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+{
+  i2c_status_t status = i2c_start(devaddr, timeout);
+  if (status) return status;
+
+  status = i2c_write(regaddr, timeout);
+  if (status) return status;
+
+  status = i2c_stop(timeout);
+  if (status) return status;
+
+  status = i2c_start(devaddr | 0x01, timeout);
+  if (status) return status;
+
+  for (uint16_t i = 0; i < (length-1); i++) {
     status = i2c_read_ack(timeout);
     if (status >= 0) {
       data[i] = status;
+    } else {
+      return status;
     }
   }
 
-  if (status >= 0) {
-    status = i2c_read_nack(timeout);
-    if (status >= 0) {
-      data[(length - 1)] = status;
-    }
+  status = i2c_read_nack(timeout);
+  if (status >= 0 ) {
+    data[(length-1)] = status;
+  } else {
+    return status;
   }
 
-error:
-  i2c_stop();
+  status = i2c_stop(timeout);
+  if (status) return status;
 
-  return (status < 0) ? status : I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
-void i2c_stop(void) {
+i2c_status_t i2c_stop(uint16_t timeout)
+{
   // transmit STOP condition
-  TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO);
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t timeout_timer = timer_read();
+  while(TWCR & (1<<TWSTO)) {
+    if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
+      return I2C_STATUS_TIMEOUT;
+    }
+  }
+
+  return I2C_STATUS_SUCCESS;
 }

drivers/avr/i2c_master.h

@@ -26,6 +26,6 @@ i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint1
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-void i2c_stop(void);
+i2c_status_t i2c_stop(uint16_t timeout);
 
 #endif // I2C_MASTER_H

drivers/avr/i2c_slave.c

@@ -16,7 +16,7 @@ static volatile bool slave_has_register_set = false;
 
 void i2c_slave_init(uint8_t address){
     // load address into TWI address register
-    TWAR = address;
+    TWAR = (address << 1);
     // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
     TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN);
 }

drivers/issi/is31fl3235a.c

@@ -0,0 +1,227 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "is31fl3235a.h"
+#include "i2c_master.h"
+#include "progmem.h"
+#include "print.h"
+
+
+#define ISSI_REG_CONFIG  0x00  // FIXME: Not on 3235?
+#define ISSI_REG_CONFIG_PICTUREMODE 0x00  // FIXME: Not on 3235?
+
+//#define ISSI_REG_AUDIOSYNC 0x06  // FIXME: Not on 3235?
+
+#define ISSI_COMMANDREGISTER 0xFD  // FIXME: Not on 3235?
+#define ISSI_BANK_FUNCTIONREG 0x0B    // FIXME: Not on 3235?
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_3235a_transfer_buffer[20];
+
+// These buffers match the IS31FL3235A PWM registers 0x05-0x20.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3235A_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_rgb7seg_buffer[IS31FL3235A_COUNT][IS31FL3235A_LED_MAX];
+bool g_rgb7seg_buffer_update_required = false;
+
+/* There's probably a better way to init this... */
+#if IS31FL3235A_COUNT == 1
+    uint8_t g_3235a_control_registers[IS31FL3235A_COUNT][18] = {{0}};
+#elif IS31FL3235A_COUNT == 2
+    uint8_t g_3235a_control_registers[IS31FL3235A_COUNT][18] = {{0}, {0}};
+#elif IS31FL3235A_COUNT == 3
+    uint8_t g_3235a_control_registers[IS31FL3235A_COUNT][18] = {{0}, {0}, {0}};
+#elif IS31FL3235A_COUNT == 4
+    uint8_t g_3235a_control_registers[IS31FL3235A_COUNT][18] = {{0}, {0}, {0}, {0}};
+#endif
+bool g_rgb7seg_control_registers_update_required = false;
+
+void IS31FL3235A_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
+    g_3235a_transfer_buffer[0] = reg;
+    g_3235a_transfer_buffer[1] = data;
+    xprintf("IS31FL3235A_write_register(0x%x, 0x%x, 0x%x); g_3235a_transfer_buffer:0x%x\n", addr, reg, data, g_3235a_transfer_buffer);
+
+    #if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr, g_3235a_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
+              break;
+            }
+        }
+    #else
+        if (i2c_transmit(addr, g_3235a_transfer_buffer, 2, ISSI_TIMEOUT) == -1) {
+            // When we encounter a timeout ChibiOS says the bus must be reset as it's in an unknown state
+            xprintf("i2c transmit timeout, resetting i2c bus!\n");
+            i2c_stop(ISSI_TIMEOUT);
+            wait_ms(5);
+            i2c_start(ISSI_TIMEOUT);
+        }
+    #endif
+}
+
+void IS31FL3235A_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
+    // assumes bank is already selected
+
+    // transmit PWM registers in 9 transfers of 16 bytes
+    // g_3235a_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for (int i = 0; i < IS31FL3235A_LED_MAX; i += 16) {
+        // set the first register, e.g. 0x24, 0x34, 0x44, etc.
+        g_3235a_transfer_buffer[0] = 0x24 + i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
+        for (int j = 0; j < 16; j++) {
+            g_3235a_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_3235a_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+        if (i2c_transmit(addr << 1, g_3235a_transfer_buffer, 17, ISSI_TIMEOUT) == -1) {
+            // When we encounter a timeout ChibiOS says the bus must be reset as it's in an unknown state
+            xprintf("i2c transmit timeout, resetting i2c bus!\n");
+            i2c_stop(ISSI_TIMEOUT);
+            wait_ms(5);
+            i2c_start(ISSI_TIMEOUT);
+        }
+    #endif
+    }
+}
+
+void IS31FL3235A_init(uint8_t addr) {
+    wait_ms(2000); // Give QMK Toolbox time to attach
+    xprintf("IS31FS3235A_init(0x%x)\n", addr);
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, first enable software shutdown,
+    // then set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // Reset settings to default
+    //IS31FL3235A_write_register(addr, ISSI_REG_RESET_REG, 0);
+
+    // this delay was copied from other drivers, might not be needed
+    wait_ms(10);
+
+    // This is how the Arduino code does init...
+    uint8_t i = 0;
+
+    for (i=0x2A; i<=0x45; i++) {
+        IS31FL3235A_write_register(addr, i, 0xFF);  // Turn off all LEDs
+    }
+
+    for (i=0x05; i<=0x20; i++) {
+        IS31FL3235A_write_register(addr, i, 0x00);  // Write all PWM set 0x00
+    }
+
+    IS31FL3235A_write_register(addr, 0x25, 0x00);   //update PWM&Control registers
+    IS31FL3235A_write_register(addr, 0x4B, 0x01);   //frequency setting 22KHz
+    IS31FL3235A_write_register(addr, 0x00, 0x01);   //normal operation
+
+    // This is how the Arduino code does LED turn on
+    IS31FL3235A_write_register(addr, 0x05, 0xFF);   // set PWM
+    IS31FL3235A_write_register(addr, 0x25, 0x00);   // update PWM&Control registers
+    IS31FL3235A_write_register(addr, 0x08, 0xFF);   // set PWM
+    IS31FL3235A_write_register(addr, 0x25, 0x00);   // update PWM&Control registers
+    IS31FL3235A_write_register(addr, 0x12, 0xFF);   // set PWM
+    IS31FL3235A_write_register(addr, 0x25, 0x00);   // update PWM&Control registers
+
+    // FIXME: This is for testing, turn on OUT1 at full brightness
+    //IS31FL3235A_write_register(addr, 0x2A, 0xFF);
+    //IS31FL3235A_write_register(addr, 0x05, 0x00);
+
+    // I think this finally turns it on?
+    //IS31FL3235A_write_register(addr, 0x25, 0x00);    //update PWM&Control registers
+    //IS31FL3235A_write_register(addr, 0x4B, 0x01);  //frequency setting 22KHz
+    //IS31FL3235A_write_register(addr, 0x00, 0x01);    //normal operation
+}
+
+void IS31FL3235A_set_value(int index, uint8_t value) {
+/*
+    if (index >= 0 && index < IS31FL3235A_LED_COUNT) {
+        is31_led led = g_is31_leds[index];
+
+        // Subtract 0x24 to get the second index of g_rgb7seg_buffer
+        g_rgb7seg_buffer[led.driver][led.v - 0x24] = value;
+        g_rgb7seg_buffer_update_required = true;
+    }
+*/
+}
+
+void IS31FL3235A_set_value_all(uint8_t value) {
+    for (int i = 0; i < IS31FL3235A_LED_COUNT; i++) {
+        IS31FL3235A_set_value(i, value);
+    }
+}
+
+void IS31FL3235A_set_led_control_register(uint8_t index, bool value) {
+/*
+  is31_led led = g_is31_leds[index];
+
+  uint8_t control_register = (led.v - 0x24) / 8;
+  uint8_t bit_value = (led.v - 0x24) % 8;
+
+    if (value) {
+        g_3235a_control_registers[led.driver][control_register] |= (1 << bit_value);
+    } else {
+        g_3235a_control_registers[led.driver][control_register] &= ~(1 << bit_value);
+    }
+
+    g_rgb7seg_control_registers_update_required = true;
+*/
+}
+
+void IS31FL3235A_update_pwm_buffers(uint8_t addr, uint8_t index) {
+    //xprintf("IS31FS3235A_update_pwm_buffers(0x%x, %d)\n", addr, index);
+    if (g_rgb7seg_buffer_update_required) {
+        IS31FL3235A_write_pwm_buffer(addr, g_rgb7seg_buffer[index]);
+        g_rgb7seg_buffer_update_required = false;
+    }
+}
+
+void IS31FL3235A_update_led_control_registers(uint8_t addr, uint8_t index) {
+    if (g_rgb7seg_control_registers_update_required) {
+        for (int i=0; i<18; i++) {
+            IS31FL3235A_write_register(addr, i, g_3235a_control_registers[index][i]);
+        }
+    }
+}

drivers/issi/is31fl3235a.h

@@ -0,0 +1,141 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef IS31FL3235A_DRIVER_H
+#define IS31FL3235A_DRIVER_H
+
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b0111111 AD <-> VCC
+// 0b0111110 AD <-> SDA
+// 0b0111101 AD <-> SCL
+// 0b0111100 AD <-> GND
+#ifndef IS31FL3235A_COUNT
+    #define IS31FL3235A_COUNT 1
+#endif
+#ifndef IS31FL3235A_DRIVER_ADDR_1
+    #define IS31FL3235A_DRIVER_ADDR_1 0b0111111
+    //#define IS31FL3235A_DRIVER_ADDR_1 0x7E
+#endif
+#ifndef IS31FL3235A_DRIVER_ADDR_2
+    #define IS31FL3235A_DRIVER_ADDR_2 0b0111110
+#endif
+#ifndef IS31FL3235A_DRIVER_ADDR_3
+    #define IS31FL3235A_DRIVER_ADDR_3 0b0111101
+#endif
+#ifndef IS31FL3235A_DRIVER_ADDR_4
+    #define IS31FL3235A_DRIVER_ADDR_4 0b0111100
+#endif
+
+// This is the max number of LEDs this driver supports per IC
+#define IS31FL3235A_LED_MAX 28
+#ifndef IS31FL3235A_LED_COUNT
+    #define IS31FL3235A_LED_COUNT IS31FL3235A_LED_MAX
+#endif
+
+// Registers we will need to write to
+#define ISSI_REG_SHUTDOWN 0x00        // Control the software shutdown state of the controller
+#define ISSI_REG_GLOBAL_CONTROL 0x4A  // Write 0 for normal operation, 1 to shutdown all LEDs
+#define ISSI_REG_OUTPUT_FREQ 0x4B     // Write 0 for 3kHz PWM, 1 for 22kHz
+#define ISSI_REG_RESET_REG 0x4F       // Write 0 to reset all registers to default value
+
+
+void IS31FL3235A_init(uint8_t addr);
+void IS31FL3235A_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3235A_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
+
+void IS31FL3235A_set_value(int index, uint8_t value);
+void IS31FL3235A_set_value_all(uint8_t value);
+
+void IS31FL3235A_set_led_control_register(uint8_t index, bool value);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3235A_update_pwm_buffers(uint8_t addr, uint8_t index);
+void IS31FL3235A_update_led_control_registers(uint8_t addr, uint8_t index);
+
+// The address for each LED in the is31fl3235a's Control Register
+enum control_register {
+    CR_OUT1 = 0x2A,
+    CR_OUT2,
+    CR_OUT3,
+    CR_OUT4,
+    CR_OUT5,
+    CR_OUT6,
+    CR_OUT7,
+    CR_OUT8,
+    CR_OUT9,
+    CR_OUT10,
+    CR_OUT11,
+    CR_OUT12,
+    CR_OUT13,
+    CR_OUT14,
+    CR_OUT15,
+    CR_OUT16,
+    CR_OUT17,
+    CR_OUT18,
+    CR_OUT19,
+    CR_OUT20,
+    CR_OUT21,
+    CR_OUT22,
+    CR_OUT23,
+    CR_OUT24,
+    CR_OUT25,
+    CR_OUT26,
+    CR_OUT27,
+    CR_OUT28
+};
+
+// The address for each LED in the is31fl3235a's PWM Register
+enum pwm_register {
+    OUT1 = 0x05,
+    OUT2,
+    OUT3,
+    OUT4,
+    OUT5,
+    OUT6,
+    OUT7,
+    OUT8,
+    OUT9,
+    OUT10,
+    OUT11,
+    OUT12,
+    OUT13,
+    OUT14,
+    OUT15,
+    OUT16,
+    OUT17,
+    OUT18,
+    OUT19,
+    OUT20,
+    OUT21,
+    OUT22,
+    OUT23,
+    OUT24,
+    OUT25,
+    OUT26,
+    OUT27,
+    OUT28
+};
+
+#endif // IS31FL3235A_DRIVER_H

drivers/qwiic/qwiic.c

@@ -22,10 +22,16 @@ void qwiic_init(void) {
   #ifdef QWIIC_MICRO_OLED_ENABLE
     micro_oled_init();
   #endif
+  #ifdef QWIIC_RGB7SEG_ENABLE
+    rgb7seg_init();
+  #endif
 }
 
 void qwiic_task(void) {
   #ifdef QWIIC_JOYSTIIC_ENABLE
     joystiic_task();
   #endif
+  #ifdef QWIIC_RGB7SEG_ENABLE
+    rgb7seg_task();
+  #endif
 }

drivers/qwiic/qwiic.h

@@ -23,6 +23,9 @@
 #ifdef QWIIC_MICRO_OLED_ENABLE
   #include "micro_oled.h"
 #endif
+#ifdef QWIIC_RGB7SEG_ENABLE
+  #include "rgb7seg.h"
+#endif
 
 void qwiic_init(void);
 void qwiic_task(void);

drivers/qwiic/qwiic.mk

@@ -16,3 +16,9 @@ ifneq ($(filter MICRO_OLED, $(QWIIC_ENABLE)),)
   OPT_DEFS += -DQWIIC_MICRO_OLED_ENABLE
   SRC += micro_oled.c
 endif
+
+ifneq ($(filter RGB7SEG, $(QWIIC_ENABLE)),)
+  COMMON_VPATH += $(DRIVER_PATH)/issi
+  OPT_DEFS += -DQWIIC_RGB7SEG_ENABLE
+  SRC += rgb7seg.c is31fl3235a.c
+endif

drivers/qwiic/rgb7seg.c

@@ -0,0 +1,168 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2017 Jack Humbert
+ * Copyright 2018 Yiancar
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "quantum.h"
+#include "rgb7seg.h"
+#include "is31fl3235a.h"
+#include "progmem.h"
+#include "config.h"
+#include "eeprom.h"
+#include <string.h>
+#include <math.h>
+
+#ifndef MAX
+    #define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
+#endif
+
+#ifndef MIN
+    #define MIN(a,b) ((a) < (b)? (a): (b))
+#endif
+
+// State variables
+uint32_t g7_tick = 0;      // Global tick at 20 Hz
+bool rgb7seg_enabled = 0;  // Whether or not the display is turned on
+
+/*
+const rgb7seg_led g_rgb7seg_leds[IS31FL3235A_COUNT * 8][4] = {
+/ * Refer to IS31 manual for these locations
+ *  driver
+ *  |   R LED address
+ *  |   |      G LED address
+ *  |   |      |      B LED address
+ *  |   |      |      | * /
+    {0, OUT17, OUT16, OUT15},  // A, top middle
+    {0, OUT22, OUT21, OUT20},  // B, top right
+    {0, OUT26, OUT27, OUT28},  // C, bottom right
+    {0, OUT1,  OUT2,  OUT3},   // D, bottom center
+    {0, OUT23, OUT24, OUT25},  // DP, dot
+    {0, OUT4,  OUT5,  OUT6},   // E, bottom left
+    {0, OUT9,  OUT7,  OUT8},   // F, top left
+    {0, OUT14, OUT13, OUT12},  // G, center
+    #if IS31FL3235A_COUNT > 1
+    {1, OUT17, OUT16, OUT15},  // A, top middle
+    {1, OUT22, OUT21, OUT20},  // B, top right
+    {1, OUT26, OUT27, OUT28},  // C, bottom right
+    {1, OUT1,  OUT2,  OUT3},   // D, bottom center
+    {1, OUT23, OUT24, OUT25},  // DP, dot
+    {1, OUT4,  OUT5,  OUT6},   // E, bottom left
+    {1, OUT9,  OUT7,  OUT8},   // F, top left
+    {1, OUT14, OUT13, OUT12},  // G, center
+    #endif
+    #if IS31FL3235A_COUNT > 2
+    {2, OUT17, OUT16, OUT15},  // A, top middle
+    {2, OUT17, OUT16, OUT15},  // A, top middle
+    {2, OUT22, OUT21, OUT20},  // B, top right
+    {2, OUT26, OUT27, OUT28},  // C, bottom right
+    {2, OUT1,  OUT2,  OUT3},   // D, bottom center
+    {2, OUT23, OUT24, OUT25},  // DP, dot
+    {2, OUT4,  OUT5,  OUT6},   // E, bottom left
+    {2, OUT9,  OUT7,  OUT8},   // F, top left
+    {2, OUT14, OUT13, OUT12},  // G, center
+    #endif
+    #if IS31FL3235A_COUNT > 3
+    {3, OUT17, OUT16, OUT15},  // A, top middle
+    {3, OUT22, OUT21, OUT20},  // B, top right
+    {3, OUT26, OUT27, OUT28},  // C, bottom right
+    {3, OUT1,  OUT2,  OUT3},   // D, bottom center
+    {3, OUT23, OUT24, OUT25},  // DP, dot
+    {3, OUT4,  OUT5,  OUT6},   // E, bottom left
+    {3, OUT9,  OUT7,  OUT8},   // F, top left
+    {3, OUT14, OUT13, OUT12},  // G, center
+    {3, OUT22, OUT21, OUT20},  // B, top right
+    #endif
+};
+*/
+
+// API
+void rgb7seg_flush(void) {
+    IS31FL3235A_update_pwm_buffers(IS31FL3235A_DRIVER_ADDR_1, 0);
+    #if IS31FL3235A_COUNT > 1
+        IS31FL3235A_update_pwm_buffers(IS31FL3235A_DRIVER_ADDR_2, 1);
+    #endif
+    #if IS31FL3235A_COUNT > 2
+        IS31FL3235A_update_pwm_buffers(IS31FL3235A_DRIVER_ADDR_3, 2);
+    #endif
+    #if IS31FL3235A_COUNT > 3
+        IS31FL3235A_update_pwm_buffers(IS31FL3235A_DRIVER_ADDR_4, 3);
+    #endif
+}
+
+void rgb7seg_set_index_value(int index, uint8_t value) {
+    IS31FL3235A_set_value(index, value);
+}
+
+void rgb7seg_set_index_value_all(uint8_t value) {
+    IS31FL3235A_set_value_all(value);
+}
+
+// All LEDs off
+void rgb7seg_off(void) {
+    rgb7seg_set_index_value_all(0);
+}
+
+void rgb7seg_task(void) {
+    g7_tick++;
+
+    // Do something here?
+
+    // Tell the LED driver to update its state
+    rgb7seg_flush();
+}
+
+void rgb7seg_init(void) {
+    IS31FL3235A_init(IS31FL3235A_DRIVER_ADDR_1);
+    #if IS31FL3235A_COUNT > 1
+        IS31FL3235A_init(IS31FL3235A_DRIVER_ADDR_2);
+    #endif
+    #if IS31FL3235A_COUNT > 2
+        IS31FL3235A_init(IS31FL3235A_DRIVER_ADDR_3);
+    #endif
+    #if IS31FL3235A_COUNT > 3
+        IS31FL3235A_init(IS31FL3235A_DRIVER_ADDR_4);
+    #endif
+
+    // Wait half a second for the driver to finish initializing
+    wait_ms(500);
+}
+
+uint32_t rgb7seg_get_tick(void) {
+    return g7_tick;
+}
+
+void rgb7seg_toggle(void) {
+    rgb7seg_enabled ^= 1;
+}
+
+void rgb7seg_enable(void) {
+    rgb7seg_enabled = 1;
+}
+
+void rgb7seg_disable(void) {
+    rgb7seg_enabled = 0;
+}
+
+void rgb7seg_increase_val(void) {
+    // FIXME: Implement
+}
+
+void rgb7seg_decrease_val(void) {
+    // FIXME: Implement
+}

drivers/qwiic/rgb7seg.h

@@ -0,0 +1,60 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2017 Jack Humbert
+ * Copyright 2018 Yiancar
+ * Copyright 2019 Clueboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef LED_MATRIX_H
+#define LED_MATRIX_H
+
+#include "is31fl3235a.h"
+
+#ifndef BACKLIGHT_ENABLE
+  #error You must define BACKLIGHT_ENABLE with LED_MATRIX_ENABLE
+#endif
+
+
+void rgb7seg_task(void);
+void rgb7seg_init(void);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void rgb7seg_flush(void);
+
+uint32_t rgb7seg_get_tick(void);
+
+void rgb7seg_off(void);
+void rgb7seg_set_index_value(int index, uint8_t value);
+void rgb7seg_set_index_value_all(uint8_t value);
+
+void rgb7seg_toggle(void);
+void rgb7seg_enable(void);
+void rgb7seg_disable(void);
+void rgb7seg_increase_val(void);
+void rgb7seg_decrease_val(void);
+
+typedef struct rgb7seg_led {
+  uint8_t driver;
+  uint8_t r;
+  uint8_t g;
+  uint8_t b;
+} __attribute__((packed)) rgb7seg_led;
+
+extern const rgb7seg_led g_rgb7seg_leds[IS31FL3235A_COUNT * 8];
+
+#endif

keyboards/1upkeyboards/1up60hte/1up60hte.h

@@ -19,12 +19,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "quantum.h"
 
-#define LAYOUT_tsangan( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K413, \
+#define LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       \
 	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       \
-	K400, K401, K402,                   K406,                   K410, K411, K412        \
+	K400, K401, K402,                   K406,                   K410, K411, K412, K413  \
 ) { \
 	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
 	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
@@ -35,11 +35,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* HHKB Variant */
 #define LAYOUT_60_hhkb( \
-    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K413, \
+  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       \
 	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       \
-	      K401, K402,                  K406,                    K410, K411              \
+	      K401, K402,                  K406,                    K410, K411,       K413  \
 ) { \
 	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
 	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
@@ -47,3 +47,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO }, \
 	{ KC_NO, K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, K413 }  \
 }
+

keyboards/1upkeyboards/1up60hte/config.h

@@ -62,4 +62,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
-#endif
+#endif

keyboards/1upkeyboards/1up60hte/info.json

@@ -1,15 +0,0 @@
-{
-    "keyboard_name": "1up60hte", 
-    "url": "https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/", 
-    "maintainer": "1upkeyboards", 
-    "width": 15, 
-    "height": 5, 
-    "layouts": {
-        "LAYOUT_tsangan": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4}, {"label":"Meta", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Meta", "x":11, "y":4, "w":1.5}, {"label":"Alt", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
-        },
-        "LAYOUT_60_hhkb": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Alt", "x":1.5, "y":4}, {"label":"Meta", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Meta", "x":11, "y":4, "w":1.5}, {"label":"Alt", "x":12.5, "y":4}]
-        }
-    }
-}

keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c

@@ -17,19 +17,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = LAYOUT_tsangan(
-		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,     KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
-		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,     KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
-		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,     KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
-		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM,  KC_DOT,  KC_SLSH, KC_LSFT, MO(1),
-		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC,  KC_LGUI, KC_LALT, KC_LCTL),
-		
-	[1] = LAYOUT_tsangan(
-		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,  KC_INS, KC_DEL,
-		KC_CAPS, BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK,  KC_PAUS, KC_UP,   KC_TRNS, KC_CLR,
-		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP,  KC_LEFT, KC_RGHT, KC_TRNS,
-		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN,   KC_DOWN, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+	[0] = LAYOUT_all(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_NO,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_LCTL, KC_BSPC),
+
+	[1] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
 };
 
 void matrix_init_user(void) {

keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c

@@ -17,19 +17,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = LAYOUT_tsangan(
-		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,     KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
-		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,     KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
-		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,     KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
-		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM,  KC_DOT,  KC_SLSH, KC_LSFT, MO(1),
-		KC_NO,   KC_LALT, KC_LGUI, KC_SPC,  KC_LGUI, KC_LALT, KC_NO),
-		
-	[1] = LAYOUT_tsangan(
-		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,  KC_INS, KC_DEL,
-		KC_CAPS, BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK,  KC_PAUS, KC_UP,   KC_TRNS, KC_CLR,
-		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP,  KC_LEFT, KC_RGHT, KC_TRNS,
-		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN,   KC_DOWN, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+	[0] = LAYOUT_all(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(1),
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_LCTL, KC_BSPC),
+
+	[1] = LAYOUT_all(
+		RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS,
+		KC_CAPS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL)
 };
 
 void matrix_init_user(void) {
@@ -44,9 +45,35 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 }
 
 void led_set_user(uint8_t usb_led) {
-	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
 		writePinLow(B6);
 	} else {
 		writePinHigh(B6);
 	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
 }

keyboards/1upkeyboards/1up60rgb/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-#include QMK_KEYBOARD_H
+#include "1up60rgb.h"
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 

keyboards/1upkeyboards/1up60rgb/keymaps/mdyevimnav/keymap.c

@@ -1,48 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/*
- * Layer 0
- * ,-----------------------------------------------------------------------------------------.
- * |  ~  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |    Bksp   |
- * |-----------------------------------------------------------------------------------------+
- * | Tab    |  q  |  w  |  e  |  r  |  t  |  y  |  u  |  i  |  o  |  p  |  [  |  ]  |   \    |
- * |-----------------------------------------------------------------------------------------+
- * | Esc     |  a  |  s  |  d  |  f  |  g  |  h  |  j  |  k  |  l  |  ;  |  '  |    Enter    |
- * |-----------------------------------------------------------------------------------------+
- * | Shift      |  z  |  x  |  c  |  v  |  b  |  n  |  m  |  ,  |  .  |  /  |    Shift       |
- * |-----------------------------------------------------------------------------------------+
- * | Ctrl  |  L1   |  Alt  |               space             |  Alt  |  Sup  |  L1   | Ctrl  |
- * \-----------------------------------------------------------------------------------------/
- *
- */
-  LAYOUT_all(
-    KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
-    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
-    KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
-    KC_LSHIFT, KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSHIFT, KC_RSHIFT,
-    KC_LCTL, MO(1), KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
-
-/*
- * Layer 1
- * ,-----------------------------------------------------------------------------------------.
- * |     |  f1 |  f2 |  f3 |  f4 |  f5 |  f6 |  f7 |  f8 |  f9 | f10 | f11 | f12 |    Del    |
- * |-----------------------------------------------------------------------------------------+
- * |        |     |     |     |     |     |     |     | Ins |     | Paus|     |     |  Prnt  |
- * |-----------------------------------------------------------------------------------------+
- * |         |     |     |     |     |     |  L  |  D  |  U  |  R  |     |     |             |
- * |-----------------------------------------------------------------------------------------+
- * |            |     |     |     |     |     | Hom | PDn | PUp | End |     |                |
- * |-----------------------------------------------------------------------------------------+
- * |       |       |       |                                 |       |       |       |       |
- * \-----------------------------------------------------------------------------------------/
- *
- */
-  LAYOUT_all(
-    KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PAUS, KC_TRNS, KC_TRNS, KC_PSCR,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
-};

keyboards/1upkeyboards/sweet16/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-#include QMK_KEYBOARD_H
+#include "sweet16.h"
 
 enum custom_keycodes {
   UP_URL = SAFE_RANGE

keyboards/40percentclub/half_n_half/config.h

@@ -46,13 +46,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define UNUSED_PINS
 
 /* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
+#define DIODE_DIRECTION ROW2COL
 
 /*
  * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
  */
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-#define USE_SERIAL
 
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING

keyboards/40percentclub/half_n_half/half_n_half.h

@@ -42,7 +42,3 @@
     { R26, R25, R24, R23, R22, R21, R20 }, \
     { ___, ___, ___, ___, R32, ___, ___ }  \
 }
-
-#ifdef USE_I2C
-  #error "I2C not Supported"
-#endif

keyboards/40percentclub/half_n_half/keymaps/Boy_314/config.h

@@ -1,22 +0,0 @@
-/* Copyright 2019 Boy_314
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here
-#define IGNORE_MOD_TAP_INTERRUPT
-#define PERMISSIVE_HOLD
-#define TAPPING_TERM 200

keyboards/40percentclub/half_n_half/keymaps/Boy_314/keymap.c

@@ -1,173 +0,0 @@
-/* Copyright 2019 Boy_314
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-// Tap Dance Declarations
-enum {
-	TD_SWAP_LAYERS = 0
-};
-
-enum layers {
-	_DVORAK,
-	_QWERTY,
-	_LOWER,
-	_RAISE,
-};
-
-enum halfnhalf_keycodes {
-	NEWTAB = SAFE_RANGE,
-	ALTF4,
-	CLSTAB,
-	PRVWIN,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	/* DVORAK
-	 * ,-------------------------------------------------------------------------------------------------.
-	 * |Tab   |'     |,     |.     |P     |Y     |Brght+|=     |F     |G     |C     |R     |L     |Bksp  |
-	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 * |CtlCps|A     |O     |E     |U     |I     |Brght-|Ctrl+F|D     |H     |T     |N     |S     |Enter |
-	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 * |LShift|;     |Q     |J     |K     |X     |LAlt  |-     |B     |M     |W     |V     |Z     |RShift|
-	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 *                             |TD Swap Layer|             |Space        |
-	 *                             `-------------'			       `-------------'
-	 */
-	[_DVORAK] = LAYOUT(/* Base Dvorak */
-	  KC_TAB,           KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_BRIU, KC_EQL,     KC_F, KC_G, KC_C,    KC_R,   KC_L,   KC_BSPC,
-	  LCTL_T(KC_CAPS),  KC_A,    KC_O,    KC_E,   KC_U, KC_I, KC_BRID, LCTL(KC_F), KC_D, KC_H, KC_T,    KC_N,   KC_S,   KC_ENT,
-	  KC_LSPO,          KC_SCLN, KC_Q,    KC_J,   KC_K, KC_X, KC_LALT, KC_MINS,    KC_B, KC_M, KC_W,    KC_V,   KC_Z,   KC_RSPC,
-	                                              TD(TD_SWAP_LAYERS),                    KC_SPC
-	),
-
-	/* QWERTY
-	 * ,-------------------------------------------------------------------------------------------------.
-	 * |Tab   |Q     |W     |E     |R     |T     |Brght+|'     |Y     |U     |I     |O     |P     |Bksp  |
-	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 * |CtlCps|A     |S     |D     |F     |G     |Brght-|Ctrl+F|H     |J     |K     |L     |;     |Enter |
-	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 * |LShift|Z     |X     |C     |V     |B     |LAlt  |-     |N     |M     |,     |.     |/     |RShift|
-	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 *                             |TD Swap Layer|             |Space        |
-	 *                             `-------------'			       `-------------'
-	 */
-	[_QWERTY] = LAYOUT(/* Base Qwerty */
-	  KC_TAB,           KC_Q,    KC_W,    KC_E,   KC_R, KC_T, KC_BRIU, KC_QUOT,    KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_BSPC,
-	  LCTL_T(KC_CAPS),  KC_A,    KC_S,    KC_D,   KC_F, KC_G, KC_BRID, LCTL(KC_F), KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_ENT,
-	  KC_LSPO,          KC_Z,    KC_X,    KC_C,   KC_V, KC_B, KC_LALT, KC_MINS,    KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC,
-	                                              TD(TD_SWAP_LAYERS),                    KC_SPC
-	),
-
-	/* LOWER
-	 * ,-------------------------------------------------------------------------------------------------.
-	 * |Esc   |1     |2     |3     |4     |5     |      |      |6     |7     |8     |9     |0     |/     |
-	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 * |Caps  |F1    |F2    |F3    |F4    |F5    |F6    |Vol Up|Play  |_     |+     |{     |}     ||     |
-	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 * |      |F7    |F8    |F9    |F10   |F11   |F12   |Vol Dn|Next  |Home  |PgDn  |PgUp  |End   |      |
-	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 *                             |             |             |             |
-	 *                             `-------------'             `-------------'
-	 */
-	[_LOWER] = LAYOUT(/* Numbers, Function Row, Media Control, Shifted Symbols, Dvorak Slash Key */
-	  KC_GESC, KC_1,  KC_2,  KC_3,  KC_4,   KC_5,   KC_TRNS, KC_TRNS, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_SLSH,
-	  KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4,  KC_F5,  KC_F6,   KC_VOLU, KC_MPLY, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
-	  KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,  KC_VOLD, KC_MNXT, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_TRNS,
-									                KC_TRNS,    					            KC_TRNS
-	),
-
-	/* RAISE
-	 * ,-------------------------------------------------------------------------------------------------.
-	 * |Reset |      |      |Up    |      |      |      |PRVWIN|CLSTAB|      |      |      |      |Del   |
-	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 * |`     |      |Left  |Down  |Right |      |      |NEWTAB|ALTF4 |-     |=     |[     |]     |\     |
-	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 * |      |!     |@     |#     |$     |%     |      |      |^     |&     |*     |(     |)     |      |
-	 * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
-	 *                             |             |             |             |
-	 *                             `-------------'             `-------------'
-	 */
-	[_RAISE] = LAYOUT(/* Arrows, Shifted Numbers, Symbols, Delete, Macros */
-	  RESET,   KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, PRVWIN,  CLSTAB,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,
-	  KC_GRV,  KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, NEWTAB,  ALTF4,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-	  KC_TRNS, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_TRNS, KC_TRNS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TRNS,
-										                    KC_TRNS,                            KC_TRNS
-	)
-};
-
-void tap_dance_choose_layer (qk_tap_dance_state_t *state, void *user_data) {
-	switch (state->count) {
-		case 1:
-			layer_on(_LOWER);
-			break;
-		case 2:
-			layer_on(_RAISE);
-			break;
-	}
-}
-
-void tap_dance_choose_layer_reset (qk_tap_dance_state_t *state, void *user_data) {
-	switch (state->count) {
-		case 1:
-			layer_off(_LOWER);
-			break;
-		case 2:
-			layer_off(_RAISE);
-			break;
-		case 3:
-			if (biton32(default_layer_state) == _DVORAK) {
-				set_single_persistent_default_layer(_QWERTY);
-			}
-			else if (biton32(default_layer_state) == _QWERTY) {
-				set_single_persistent_default_layer(_DVORAK);
-			}
-			break;
-	}
-}
-
-qk_tap_dance_action_t tap_dance_actions[] = {
-	[TD_SWAP_LAYERS] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, tap_dance_choose_layer, tap_dance_choose_layer_reset)
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	switch (keycode) {
-		// Control + T
-		case NEWTAB:
-			if (record->event.pressed) {
-				SEND_STRING(SS_LCTRL("t"));
-			}
-			break;
-		// Alt + F4
-		case ALTF4:
-			if (record->event.pressed) {
-				SEND_STRING(SS_DOWN(X_LALT)SS_TAP(X_F4)SS_UP(X_LALT));
-			}
-			break;
-		// Control + W
-		case CLSTAB:
-			if (record->event.pressed) {
-				SEND_STRING(SS_LCTRL("w"));
-			}
-			break;
-		// Control + Shift + N
-		case PRVWIN:
-			if (record->event.pressed) {
-				SEND_STRING(SS_LCTRL(SS_LSFT("n")));
-			}
-			break;
-	}
-	return true;
-}

keyboards/40percentclub/half_n_half/keymaps/Boy_314/readme.md

@@ -1,2 +0,0 @@
-# Boy_314's keymap for half_n_half
-# Currently only supports DVORAK. QWERTY Support is on the TODO list.

keyboards/40percentclub/half_n_half/keymaps/Boy_314/rules.mk

@@ -1,5 +0,0 @@
-TAP_DANCE_ENABLE = yes      # Enable Tap Dance
-NKRO_ENABLE = yes           # USB Nkey Rollover
-
-# Enable generic behavior for split boards
-SPLIT_KEYBOARD = yes

keyboards/40percentclub/half_n_half/rules.mk

@@ -79,6 +79,3 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
-
-# Enable generic behavior for split boards
-SPLIT_KEYBOARD = yes

keyboards/40percentclub/ut47/keymaps/default/config.h

@@ -16,4 +16,6 @@
 
 #pragma once
 
+#include "config_common.h"
+
 // place overrides here

keyboards/412_64/readme.md

@@ -1,15 +1,15 @@
 # 412-64
 
-![412-64](https://i.imgur.com/ixuv3OM.jpg)
+![412-64](image_here)
 
 A compact 60% keyboard designed by Fate Everywhere and sold on a limited basis. Born out of the desire for a Planck with a numpad for technical work.
 
 Keyboard Maintainer: [Fate Everywhere](https://github.com/fateeverywhere)  
-Hardware Supported: 4x16 T&E Prototype, Mark Zero Stand Aside.  
-Hardware Availability: No longer available, was a tester for Stand Aside. Build definitions are in handwired because two units are in the wild.
+Hardware Supported: 4x16 T&E Prototype, 412-64 Mk. 0, Mk. 1.  
+Hardware Availability: Highly limited, contact /u/FateEverywhere on reddit for availability.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make handwired/412_64:default
+    make 412-64:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ai03/orbit/config.h

@@ -1,249 +0,0 @@
-/*
-Copyright 2018 Ryota Goto
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xA103
-#define PRODUCT_ID      0x0003
-#define DEVICE_VER      0x0003
-#define MANUFACTURER    ai03 Keyboard Designs
-#define PRODUCT         Orbit
-#define DESCRIPTION     Split ergonomic keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 10 // Double rows for split keyboards. Orbit has 5, so define 10
-#define MATRIX_COLS 7
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F7, F6, F5, F4, D3 }
-#define MATRIX_COL_PINS { C7, B4, D7, D6, D4, F1, F0 }
-#define MATRIX_ROW_PINS_RIGHT { B6, B5, B4, D7, E6 }
-#define MATRIX_COL_PINS_RIGHT { D4, D6, F1, F0, F4, F5, C6 }
-
-#define SPLIT_HAND_PIN D5
-
-//#define USE_I2C
-
-#define SELECT_SOFT_SERIAL_SPEED 1
-
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-#define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-//   #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ai03/orbit/keymaps/default/keymap.c

@@ -1,91 +0,0 @@
-/* Copyright 2018 Ryota Goto
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-// Defines the keycodes used by our macros in process_record_user
-enum custom_keycodes {
-  MANUAL = SAFE_RANGE,
-  DBLZERO
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = LAYOUT( /* Base */
-		TO(1),   KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_LBRC, KC_BSPC, \
-		TO(1),   KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_RBRC, KC_BSLS, \
-		KC_NO,   KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  \
-		KC_NO,   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_PSCR, KC_DEL,  \
-			     KC_LCTL, KC_LCTL, KC_LGUI, KC_LALT, MO(1),   KC_SPC,  KC_SPC,  MO(2),   KC_GRV,  KC_MENU, KC_MINS, KC_EQL 
-	),
-	[1] = LAYOUT( /* Fn, Arrowkeys, Media control, Backlight */
-		TO(2),   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_VOLU, _______, \
-		TO(2),   _______, _______, KC_PGUP, _______, _______, KC_F11,  KC_F12,  _______, KC_UP,   _______, _______, KC_VOLD, BL_STEP, \
-		TO(0),   _______, KC_HOME, KC_PGDN, KC_END,  _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_MPLY, _______, \
-		TO(0),   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS,  \
-			     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-	),
-	[2] = LAYOUT( /* Mousekeys and Numpad */
-		KC_NO,   _______, _______, _______, _______, _______, _______, KC_NLCK, KC_P7,   KC_P8,   KC_P9,   KC_PSLS, _______, _______, \
-		KC_NO,   _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, _______, _______, KC_P4,   KC_P5,   KC_P6,   KC_PAST, _______, _______, \
-		TO(1),   _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, _______, KC_P1,   KC_P2,   KC_P3,   KC_PMNS, _______, _______, \
-		TO(1),   _______, KC_ACL0, KC_ACL1, KC_ACL2, KC_BTN3, _______, DBLZERO, KC_P0,   KC_PDOT, KC_PENT, KC_PPLS, _______, MANUAL,  \
-			     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-	)
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	switch (keycode) {
-		case MANUAL:
-			if (record->event.pressed) 
-			{
-				// Keypress
-				SEND_STRING("https://kb.ai03.me/redir/orbit");
-			} 
-			else 
-			{
-				// Key release
-			}
-			break;
-		case DBLZERO:
-			if (record->event.pressed) 
-			{
-				// Keypress
-				SEND_STRING("00");
-			} 
-			else 
-			{
-				// Key release
-			}
-			break;
-  }
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
-
-uint32_t layer_state_set_user(uint32_t state) {
-		
-	return state;
-}

keyboards/ai03/orbit/keymaps/default/readme.md

@@ -1,3 +0,0 @@
-# The default keymap for Orbit
-
-[KLE of layout](http://www.keyboard-layout-editor.com/#/gists/53ebf59524de12515cb7e2e6de94f0d6)

keyboards/ai03/orbit/matrix.c

@@ -1,328 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include "wait.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "config.h"
-#include "split_flags.h"
-#include "quantum.h"
-#include "debounce.h"
-#include "transport.h"
-
-#if (MATRIX_COLS <= 8)
-#  define print_matrix_header() print("\nr/c 01234567\n")
-#  define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-#  define matrix_bitpop(i) bitpop(matrix[i])
-#  define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-#  define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-#  define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-#  define matrix_bitpop(i) bitpop16(matrix[i])
-#  define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-#  define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-#  define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-#  define matrix_bitpop(i) bitpop32(matrix[i])
-#  define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-//#define ROWS_PER_HAND (MATRIX_ROWS / 2)
-
-#ifdef DIRECT_PINS
-static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS;
-#else
-static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t raw_matrix[ROWS_PER_HAND];
-
-// row offsets for each hand
-uint8_t thisHand, thatHand;
-
-// user-defined overridable functions
-
-__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
-
-__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
-
-__attribute__((weak)) void matrix_init_user(void) {}
-
-__attribute__((weak)) void matrix_scan_user(void) {}
-
-__attribute__((weak)) void matrix_slave_scan_user(void) {}
-
-// helper functions
-
-inline uint8_t matrix_rows(void) { return MATRIX_ROWS; }
-
-inline uint8_t matrix_cols(void) { return MATRIX_COLS; }
-
-bool matrix_is_modified(void) {
-  if (debounce_active()) return false;
-  return true;
-}
-
-inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
-
-inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
-
-void matrix_print(void) {
-  print_matrix_header();
-
-  for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-    phex(row);
-    print(": ");
-    print_matrix_row(row);
-    print("\n");
-  }
-}
-
-uint8_t matrix_key_count(void) {
-  uint8_t count = 0;
-  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-    count += matrix_bitpop(i);
-  }
-  return count;
-}
-
-// matrix code
-
-#ifdef DIRECT_PINS
-
-static void init_pins(void) {
-  for (int row = 0; row < MATRIX_ROWS; row++) {
-    for (int col = 0; col < MATRIX_COLS; col++) {
-      pin_t pin = direct_pins[row][col];
-      if (pin != NO_PIN) {
-        setPinInputHigh(pin);
-      }
-    }
-  }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
-  matrix_row_t last_row_value = current_matrix[current_row];
-  current_matrix[current_row] = 0;
-
-  for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
-    pin_t pin = direct_pins[current_row][col_index];
-    if (pin != NO_PIN) {
-      current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index);
-    }
-  }
-
-  return (last_row_value != current_matrix[current_row]);
-}
-
-#elif (DIODE_DIRECTION == COL2ROW)
-
-static void select_row(uint8_t row) {
-  setPinOutput(row_pins[row]);
-  writePinLow(row_pins[row]);
-}
-
-static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); }
-
-static void unselect_rows(void) {
-  for (uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-    setPinInputHigh(row_pins[x]);
-  }
-}
-
-static void init_pins(void) {
-  unselect_rows();
-  for (uint8_t x = 0; x < MATRIX_COLS; x++) {
-    setPinInputHigh(col_pins[x]);
-  }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
-  // Store last value of row prior to reading
-  matrix_row_t last_row_value = current_matrix[current_row];
-
-  // Clear data in matrix row
-  current_matrix[current_row] = 0;
-
-  // Select row and wait for row selecton to stabilize
-  select_row(current_row);
-  wait_us(30);
-
-  // For each col...
-  for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
-    // Populate the matrix row with the state of the col pin
-    current_matrix[current_row] |= readPin(col_pins[col_index]) ? 0 : (ROW_SHIFTER << col_index);
-  }
-
-  // Unselect row
-  unselect_row(current_row);
-
-  return (last_row_value != current_matrix[current_row]);
-}
-
-#elif (DIODE_DIRECTION == ROW2COL)
-
-static void select_col(uint8_t col) {
-  setPinOutput(col_pins[col]);
-  writePinLow(col_pins[col]);
-}
-
-static void unselect_col(uint8_t col) { setPinInputHigh(col_pins[col]); }
-
-static void unselect_cols(void) {
-  for (uint8_t x = 0; x < MATRIX_COLS; x++) {
-    setPinInputHigh(col_pins[x]);
-  }
-}
-
-static void init_pins(void) {
-  unselect_cols();
-  for (uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-    setPinInputHigh(row_pins[x]);
-  }
-}
-
-static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
-  bool matrix_changed = false;
-
-  // Select col and wait for col selecton to stabilize
-  select_col(current_col);
-  wait_us(30);
-
-  // For each row...
-  for (uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) {
-    // Store last value of row prior to reading
-    matrix_row_t last_row_value = current_matrix[row_index];
-
-    // Check row pin state
-    if (readPin(row_pins[row_index])) {
-      // Pin HI, clear col bit
-      current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
-    } else {
-      // Pin LO, set col bit
-      current_matrix[row_index] |= (ROW_SHIFTER << current_col);
-    }
-
-    // Determine if the matrix changed state
-    if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) {
-      matrix_changed = true;
-    }
-  }
-
-  // Unselect col
-  unselect_col(current_col);
-
-  return matrix_changed;
-}
-
-#endif
-
-void matrix_init(void) {
-  debug_enable = true;
-  debug_matrix = true;
-  debug_mouse  = true;
-
-  // Set pinout for right half if pinout for that half is defined
-  if (!isLeftHand) {
-#ifdef MATRIX_ROW_PINS_RIGHT
-    const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-      row_pins[i] = row_pins_right[i];
-    }
-#endif
-#ifdef MATRIX_COL_PINS_RIGHT
-    const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT;
-    for (uint8_t i = 0; i < MATRIX_COLS; i++) {
-      col_pins[i] = col_pins_right[i];
-    }
-#endif
-  }
-
-  thisHand = isLeftHand ? 0 : (ROWS_PER_HAND);
-  thatHand = ROWS_PER_HAND - thisHand;
-
-  // initialize key pins
-  init_pins();
-
-  // initialize matrix state: all keys off
-  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-    matrix[i] = 0;
-  }
-
-  debounce_init(ROWS_PER_HAND);
-
-  matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void) {
-  bool changed = false;
-
-#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW)
-  // Set row, read cols
-  for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
-    changed |= read_cols_on_row(raw_matrix, current_row);
-  }
-#elif (DIODE_DIRECTION == ROW2COL)
-  // Set col, read rows
-  for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
-    changed |= read_rows_on_col(raw_matrix, current_col);
-  }
-#endif
-
-  debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed);
-
-  return 1;
-}
-
-uint8_t matrix_scan(void) {
-  uint8_t ret = _matrix_scan();
-
-  if (is_keyboard_master()) {
-    static uint8_t error_count;
-
-    if (!transport_master(matrix + thatHand)) {
-      error_count++;
-
-      if (error_count > ERROR_DISCONNECT_COUNT) {
-        // reset other half if disconnected
-        for (int i = 0; i < ROWS_PER_HAND; ++i) {
-          matrix[thatHand + i] = 0;
-        }
-      }
-    } else {
-      error_count = 0;
-    }
-
-    matrix_scan_quantum();
-  } else {
-    transport_slave(matrix + thisHand);
-    matrix_slave_scan_user();
-  }
-
-  return ret;
-}

keyboards/ai03/orbit/matrix.h

@@ -1,3 +0,0 @@
-#pragma once
-
-#include <common/matrix.h>

keyboards/ai03/orbit/orbit.c

@@ -1,228 +0,0 @@
-/* Copyright 2018 Ryota Goto
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "orbit.h"
-#include "split_util.h"
-#include "transport.h"
-
-
-// Call led_toggle to set LEDs easily
-// LED IDs:
-// 
-// (LEFT) 0 1 2   |   3 4 5 (RIGHT)
-
-void led_toggle(int id, bool on) {
-	
-	if (isLeftHand) {
-		switch(id) {
-			case 0:
-				// Left hand C6
-				if (on)
-					//PORTC |= (1<<6);
-					writePinHigh(C6);
-				else
-					//PORTC &= ~(1<<6);
-					writePinLow(C6);
-				break;
-			case 1:
-				// Left hand B6
-				if (on)
-					//PORTB |= (1<<6);
-					writePinHigh(B6);
-				else
-					//PORTB &= ~(1<<6);
-					writePinLow(B6);
-				break;
-			case 2:
-				// Left hand B5
-				if (on)
-					//PORTB |= (1<<5);
-					writePinHigh(B5);
-				else
-					//PORTB &= ~(1<<5);
-					writePinLow(B5);
-				break;
-			default:
-				break;
-		}
-	} else {
-		switch(id) {
-			case 3:
-				// Right hand F6
-				if (on)
-					//PORTF |= (1<<6);
-					writePinHigh(F6);
-				else
-					//PORTF &= ~(1<<6);
-					writePinLow(F6);
-				break;
-			case 4:
-				// Right hand F7
-				if (on)
-					//PORTF |= (1<<7);
-					writePinHigh(F7);
-				else
-					//PORTF &= ~(1<<7);
-					writePinLow(F7);
-				break;
-			case 5:
-				// Right hand C7
-				if (on)
-					//PORTC |= (1<<7);
-					writePinHigh(C7);
-				else
-					//PORTC &= ~(1<<7);
-					writePinLow(C7);
-				break;
-			default:
-				break;
-		}
-	}
-}
-
-// Set all LEDs at once using an array of 6 booleans
-// LED IDs:
-// 
-// (LEFT) 0 1 2   |   3 4 5 (RIGHT)
-// 
-// Ex. set_all_leds({ false, false, false, true, true, true }) would turn off left hand, turn on right hand
-
-void set_all_leds(bool leds[6]) {
-	for (int i = 0; i < 6; i++) {
-		led_toggle(i, leds[i]);
-	}
-}
-
-void set_layer_indicators(uint8_t layer) {
-	
-	switch (layer)
-	{
-		case 0:
-			led_toggle(0, true);
-			led_toggle(1, false);
-			led_toggle(2, false);
-			break;
-		case 1:
-			led_toggle(0, true);
-			led_toggle(1, true);
-			led_toggle(2, false);
-			break;
-		case 2:
-			led_toggle(0, true);
-			led_toggle(1, true);
-			led_toggle(2, true);
-			break;
-		case 3:
-			led_toggle(0, false);
-			led_toggle(1, true);
-			led_toggle(2, true);
-			break;
-		case 4:
-			led_toggle(0, false);
-			led_toggle(1, false);
-			led_toggle(2, true);
-			break;
-		default:
-			led_toggle(0, true);
-			led_toggle(1, false);
-			led_toggle(2, true);
-			break;
-	}
-	
-}
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	
-	// Initialize indicator LEDs to output
-	if (isLeftHand)
-	{
-		setPinOutput(C6);
-		setPinOutput(B6);
-		setPinOutput(B5);
-		//DDRC |= (1<<6);
-		//DDRB |= (1<<6);
-		//DDRB |= (1<<5);
-	}
-	else
-	{
-		setPinOutput(F6);
-		setPinOutput(F7);
-		setPinOutput(C7);
-		//DDRF |= (1<<6);
-		//DDRF |= (1<<7);
-		//DDRC |= (1<<7);
-	}
-
-	set_layer_indicators(0);
-	
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-	
-	if (is_keyboard_master()) {
-	
-		serial_m2s_buffer.nlock_led = IS_LED_ON(usb_led, USB_LED_NUM_LOCK);
-		serial_m2s_buffer.clock_led = IS_LED_ON(usb_led, USB_LED_CAPS_LOCK);
-		serial_m2s_buffer.slock_led = IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK);
-
-		led_toggle(3, IS_LED_ON(usb_led, USB_LED_NUM_LOCK));
-		led_toggle(4, IS_LED_ON(usb_led, USB_LED_CAPS_LOCK));
-		led_toggle(5, IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK));
-		
-	}
-
-	led_set_user(usb_led);
-}
-
-uint32_t layer_state_set_kb(uint32_t state) {
-	
-	if (is_keyboard_master())
-	{
-		
-		current_layer = biton32(state);
-		serial_m2s_buffer.current_layer = biton32(state);
-		
-		// If left half, do the LED toggle thing
-		if (isLeftHand)
-		{
-			set_layer_indicators(biton32(state));
-		}
-		
-	}
-	// NOTE: Do not set slave LEDs here.
-	// This is not called on slave
-	
-	return layer_state_set_user(state);
-}
-
-

keyboards/ai03/orbit/orbit.h

@@ -1,65 +0,0 @@
-/* Copyright 2018 Ryota Goto
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef ORBIT_H
-#define ORBIT_H
-
-#include "quantum.h"
-
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
- 
-#ifdef USE_I2C
-#include <stddef.h>
-#ifdef __AVR__
-  #include <avr/io.h>
-  #include <avr/interrupt.h>
-#endif
-#endif
-
-
-#define LAYOUT( \
-    L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
-	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
-	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
-	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
-         L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45 \
-) \
-{ \
-	{ L00,   L01,   L02,   L03,   L04,   L05,   L06 }, \
-	{ L10,   L11,   L12,   L13,   L14,   L15,   L16 }, \
-	{ L20,   L21,   L22,   L23,   L24,   L25,   L26 }, \
-	{ L30,   L31,   L32,   L33,   L34,   L35,   L36 }, \
-	{ KC_NO, L41,   L42,   L43,   L44,   L45,   L46 }, \
-	{ R00,   R01,   R02,   R03,   R04,   R05,   R06 }, \
-	{ R10,   R11,   R12,   R13,   R14,   R15,   R16 }, \
-	{ R20,   R21,   R22,   R23,   R24,   R25,   R26 }, \
-	{ R30,   R31,   R32,   R33,   R34,   R35,   R36 }, \
-	{ R40,   R41,   R42,   R43,   R44,   R45, KC_NO }  \
-}
-
-uint8_t current_layer;
-
-extern void led_toggle(int id, bool on);
-void set_all_leds(bool leds[6]);
-extern void set_layer_indicators(uint8_t layer);
-
-#endif

keyboards/ai03/orbit/readme.md

@@ -1,15 +0,0 @@
-# Orbit
-
-![Orbit](https://raw.githubusercontent.com/ai03-2725/Orbit/master/Images/PCB-R2.0.jpg) 
-
-A split ergonomic keyboard project.  
-
-Keyboard Maintainer: [ai03](https://github.com/ai03-2725)  
-Hardware Supported: The [Orbit PCB](https://github.com/ai03-2725/Orbit)  
-Hardware Availability: [This repository](https://github.com/ai03-2725/Orbit) has PCB files. Case group buy orders are currently closed.  
-
-Make example for this keyboard (after setting up your build environment):
-
-    make ai03/orbit:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ai03/orbit/rules.mk

@@ -1,92 +0,0 @@
-SRC += split_util.c \
-	   split_flags.c \
-	   serial.c \
-	   transport.c \
-	   matrix.c
-
-# MCU name
-#MCU = at90usb1286
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-BOOTLOADER = atmel-dfu
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
-USE_I2C = no                # I2C for split communication
-CUSTOM_MATRIX = yes			# For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c)
-# SPLIT_KEYBOARD = yes		# Split keyboard flag disabled as manual edits had to be done to the split common files
-
-

keyboards/ai03/orbit/serial.c

@@ -1,546 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- *
- * 2018-10-28 checked
- *  avr-gcc 4.9.2
- *  avr-gcc 5.4.0
- *  avr-gcc 7.3.0
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <stddef.h>
-#include <stdbool.h>
-#include "serial.h"
-//#include <pro_micro.h>
-
-#ifdef SOFT_SERIAL_PIN
-
-#ifdef __AVR_ATmega32U4__
-  // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
-  #ifdef USE_AVR_I2C
-    #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
-      #error Using ATmega32U4 I2C, so can not use PD0, PD1
-    #endif
-  #endif
-
-  #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
-    #define SERIAL_PIN_DDR   DDRD
-    #define SERIAL_PIN_PORT  PORTD
-    #define SERIAL_PIN_INPUT PIND
-    #if SOFT_SERIAL_PIN == D0
-      #define SERIAL_PIN_MASK _BV(PD0)
-      #define EIMSK_BIT       _BV(INT0)
-      #define EICRx_BIT       (~(_BV(ISC00) | _BV(ISC01)))
-      #define SERIAL_PIN_INTERRUPT INT0_vect
-    #elif  SOFT_SERIAL_PIN == D1
-      #define SERIAL_PIN_MASK _BV(PD1)
-      #define EIMSK_BIT       _BV(INT1)
-      #define EICRx_BIT       (~(_BV(ISC10) | _BV(ISC11)))
-      #define SERIAL_PIN_INTERRUPT INT1_vect
-    #elif  SOFT_SERIAL_PIN == D2
-      #define SERIAL_PIN_MASK _BV(PD2)
-      #define EIMSK_BIT       _BV(INT2)
-      #define EICRx_BIT       (~(_BV(ISC20) | _BV(ISC21)))
-      #define SERIAL_PIN_INTERRUPT INT2_vect
-    #elif  SOFT_SERIAL_PIN == D3
-      #define SERIAL_PIN_MASK _BV(PD3)
-      #define EIMSK_BIT       _BV(INT3)
-      #define EICRx_BIT       (~(_BV(ISC30) | _BV(ISC31)))
-      #define SERIAL_PIN_INTERRUPT INT3_vect
-    #endif
-  #elif  SOFT_SERIAL_PIN == E6
-    #define SERIAL_PIN_DDR   DDRE
-    #define SERIAL_PIN_PORT  PORTE
-    #define SERIAL_PIN_INPUT PINE
-    #define SERIAL_PIN_MASK  _BV(PE6)
-    #define EIMSK_BIT        _BV(INT6)
-    #define EICRx_BIT        (~(_BV(ISC60) | _BV(ISC61)))
-    #define SERIAL_PIN_INTERRUPT INT6_vect
-  #else
-  #error invalid SOFT_SERIAL_PIN value
-  #endif
-
-#else
- #error serial.c now support ATmega32U4 only
-#endif
-
-#define ALWAYS_INLINE __attribute__((always_inline))
-#define NO_INLINE __attribute__((noinline))
-#define _delay_sub_us(x)    __builtin_avr_delay_cycles(x)
-
-// parity check
-#define ODD_PARITY 1
-#define EVEN_PARITY 0
-#define PARITY EVEN_PARITY
-
-#ifdef SERIAL_DELAY
-  // custom setup in config.h
-  // #define TID_SEND_ADJUST 2
-  // #define SERIAL_DELAY 6             // micro sec
-  // #define READ_WRITE_START_ADJUST 30 // cycles
-  // #define READ_WRITE_WIDTH_ADJUST 8 // cycles
-#else
-// ============ Standard setups ============
-
-#ifndef SELECT_SOFT_SERIAL_SPEED
-#define SELECT_SOFT_SERIAL_SPEED 1
-//  0: about 189kbps (Experimental only)
-//  1: about 137kbps (default)
-//  2: about 75kbps
-//  3: about 39kbps
-//  4: about 26kbps
-//  5: about 20kbps
-#endif
-
-#if __GNUC__ < 6
-  #define TID_SEND_ADJUST 14
-#else
-  #define TID_SEND_ADJUST 2
-#endif
-
-#if SELECT_SOFT_SERIAL_SPEED == 0
-  // Very High speed
-  #define SERIAL_DELAY 4             // micro sec
-  #if __GNUC__ < 6
-    #define READ_WRITE_START_ADJUST 33 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_START_ADJUST 34 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 1
-  // High speed
-  #define SERIAL_DELAY 6             // micro sec
-  #if __GNUC__ < 6
-    #define READ_WRITE_START_ADJUST 30 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_START_ADJUST 33 // cycles
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 2
-  // Middle speed
-  #define SERIAL_DELAY 12            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 3
-  // Low speed
-  #define SERIAL_DELAY 24            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 4
-  // Very Low speed
-  #define SERIAL_DELAY 36            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 5
-  // Ultra Low speed
-  #define SERIAL_DELAY 48            // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #if __GNUC__ < 6
-    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
-  #else
-    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
-  #endif
-#else
-#error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif /* SELECT_SOFT_SERIAL_SPEED */
-#endif /* SERIAL_DELAY */
-
-#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
-#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
-
-#define SLAVE_INT_WIDTH_US 1
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-  #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
-#else
-  #define SLAVE_INT_ACK_WIDTH_UNIT 2
-  #define SLAVE_INT_ACK_WIDTH 4
-#endif
-
-static SSTD_t *Transaction_table = NULL;
-static uint8_t Transaction_table_size = 0;
-
-inline static void serial_delay(void) ALWAYS_INLINE;
-inline static
-void serial_delay(void) {
-  _delay_us(SERIAL_DELAY);
-}
-
-inline static void serial_delay_half1(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half1(void) {
-  _delay_us(SERIAL_DELAY_HALF1);
-}
-
-inline static void serial_delay_half2(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half2(void) {
-  _delay_us(SERIAL_DELAY_HALF2);
-}
-
-inline static void serial_output(void) ALWAYS_INLINE;
-inline static
-void serial_output(void) {
-  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
-inline static
-void serial_input_with_pullup(void) {
-  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
-  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
-inline static
-uint8_t serial_read_pin(void) {
-  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
-}
-
-inline static void serial_low(void) ALWAYS_INLINE;
-inline static
-void serial_low(void) {
-  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
-}
-
-inline static void serial_high(void) ALWAYS_INLINE;
-inline static
-void serial_high(void) {
-  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
-{
-    Transaction_table = sstd_table;
-    Transaction_table_size = (uint8_t)sstd_table_size;
-    serial_output();
-    serial_high();
-}
-
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
-{
-    Transaction_table = sstd_table;
-    Transaction_table_size = (uint8_t)sstd_table_size;
-    serial_input_with_pullup();
-
-    // Enable INT0-INT3,INT6
-    EIMSK |= EIMSK_BIT;
-#if SERIAL_PIN_MASK == _BV(PE6)
-    // Trigger on falling edge of INT6
-    EICRB &= EICRx_BIT;
-#else
-    // Trigger on falling edge of INT0-INT3
-    EICRA &= EICRx_BIT;
-#endif
-}
-
-// Used by the sender to synchronize timing with the reciver.
-static void sync_recv(void) NO_INLINE;
-static
-void sync_recv(void) {
-  for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
-  }
-  // This shouldn't hang if the target disconnects because the
-  // serial line will float to high if the target does disconnect.
-  while (!serial_read_pin());
-}
-
-// Used by the reciver to send a synchronization signal to the sender.
-static void sync_send(void) NO_INLINE;
-static
-void sync_send(void) {
-  serial_low();
-  serial_delay();
-  serial_high();
-}
-
-// Reads a byte from the serial line
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
-    uint8_t byte, i, p, pb;
-
-  _delay_sub_us(READ_WRITE_START_ADJUST);
-  for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) {
-      serial_delay_half1();   // read the middle of pulses
-      if( serial_read_pin() ) {
-          byte = (byte << 1) | 1; p ^= 1;
-      } else {
-          byte = (byte << 1) | 0; p ^= 0;
-      }
-      _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
-      serial_delay_half2();
-  }
-  /* recive parity bit */
-  serial_delay_half1();   // read the middle of pulses
-  pb = serial_read_pin();
-  _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
-  serial_delay_half2();
-
-  *pterrcount += (p != pb)? 1 : 0;
-
-  return byte;
-}
-
-// Sends a byte with MSB ordering
-void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
-void serial_write_chunk(uint8_t data, uint8_t bit) {
-    uint8_t b, p;
-    for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) {
-        if(data & b) {
-            serial_high(); p ^= 1;
-        } else {
-            serial_low();  p ^= 0;
-        }
-        serial_delay();
-    }
-    /* send parity bit */
-    if(p & 1) { serial_high(); }
-    else      { serial_low(); }
-    serial_delay();
-
-    serial_low(); // sync_send() / senc_recv() need raise edge
-}
-
-static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-void serial_send_packet(uint8_t *buffer, uint8_t size) {
-  for (uint8_t i = 0; i < size; ++i) {
-    uint8_t data;
-    data = buffer[i];
-    sync_send();
-    serial_write_chunk(data,8);
-  }
-}
-
-static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
-  uint8_t pecount = 0;
-  for (uint8_t i = 0; i < size; ++i) {
-    uint8_t data;
-    sync_recv();
-    data = serial_read_chunk(&pecount, 8);
-    buffer[i] = data;
-  }
-  return pecount == 0;
-}
-
-inline static
-void change_sender2reciver(void) {
-    sync_send();          //0
-    serial_delay_half1(); //1
-    serial_low();         //2
-    serial_input_with_pullup(); //2
-    serial_delay_half1(); //3
-}
-
-inline static
-void change_reciver2sender(void) {
-    sync_recv();     //0
-    serial_delay();  //1
-    serial_low();    //3
-    serial_output(); //3
-    serial_delay_half1(); //4
-}
-
-static inline uint8_t nibble_bits_count(uint8_t bits)
-{
-    bits = (bits & 0x5) + (bits >> 1 & 0x5);
-    bits = (bits & 0x3) + (bits >> 2 & 0x3);
-    return bits;
-}
-
-// interrupt handle to be used by the target device
-ISR(SERIAL_PIN_INTERRUPT) {
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-  serial_low();
-  serial_output();
-  SSTD_t *trans = Transaction_table;
-#else
-  // recive transaction table index
-  uint8_t tid, bits;
-  uint8_t pecount = 0;
-  sync_recv();
-  bits = serial_read_chunk(&pecount,7);
-  tid = bits>>3;
-  bits = (bits&7) != nibble_bits_count(tid);
-  if( bits || pecount> 0 || tid > Transaction_table_size ) {
-      return;
-  }
-  serial_delay_half1();
-
-  serial_high(); // response step1 low->high
-  serial_output();
-  _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
-  SSTD_t *trans = &Transaction_table[tid];
-  serial_low(); // response step2 ack high->low
-#endif
-
-  // target send phase
-  if( trans->target2initiator_buffer_size > 0 )
-      serial_send_packet((uint8_t *)trans->target2initiator_buffer,
-                         trans->target2initiator_buffer_size);
-  // target switch to input
-  change_sender2reciver();
-
-  // target recive phase
-  if( trans->initiator2target_buffer_size > 0 ) {
-      if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
-                               trans->initiator2target_buffer_size) ) {
-          *trans->status = TRANSACTION_ACCEPTED;
-      } else {
-          *trans->status = TRANSACTION_DATA_ERROR;
-      }
-  } else {
-      *trans->status = TRANSACTION_ACCEPTED;
-  }
-
-  sync_recv(); //weit initiator output to high
-}
-
-/////////
-//  start transaction by initiator
-//
-// int  soft_serial_transaction(int sstd_index)
-//
-// Returns:
-//    TRANSACTION_END
-//    TRANSACTION_NO_RESPONSE
-//    TRANSACTION_DATA_ERROR
-// this code is very time dependent, so we need to disable interrupts
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int  soft_serial_transaction(void) {
-  SSTD_t *trans = Transaction_table;
-#else
-int  soft_serial_transaction(int sstd_index) {
-  if( sstd_index > Transaction_table_size )
-      return TRANSACTION_TYPE_ERROR;
-  SSTD_t *trans = &Transaction_table[sstd_index];
-#endif
-  cli();
-
-  // signal to the target that we want to start a transaction
-  serial_output();
-  serial_low();
-  _delay_us(SLAVE_INT_WIDTH_US);
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-  // wait for the target response
-  serial_input_with_pullup();
-  _delay_us(SLAVE_INT_RESPONSE_TIME);
-
-  // check if the target is present
-  if (serial_read_pin()) {
-    // target failed to pull the line low, assume not present
-    serial_output();
-    serial_high();
-    *trans->status = TRANSACTION_NO_RESPONSE;
-    sei();
-    return TRANSACTION_NO_RESPONSE;
-  }
-
-#else
-  // send transaction table index
-  int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index));
-  sync_send();
-  _delay_sub_us(TID_SEND_ADJUST);
-  serial_write_chunk(tid, 7);
-  serial_delay_half1();
-
-  // wait for the target response (step1 low->high)
-  serial_input_with_pullup();
-  while( !serial_read_pin() ) {
-      _delay_sub_us(2);
-  }
-
-  // check if the target is present (step2 high->low)
-  for( int i = 0; serial_read_pin(); i++ ) {
-      if (i > SLAVE_INT_ACK_WIDTH + 1) {
-          // slave failed to pull the line low, assume not present
-          serial_output();
-          serial_high();
-          *trans->status = TRANSACTION_NO_RESPONSE;
-          sei();
-          return TRANSACTION_NO_RESPONSE;
-      }
-      _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
-  }
-#endif
-
-  // initiator recive phase
-  // if the target is present syncronize with it
-  if( trans->target2initiator_buffer_size > 0 ) {
-      if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
-                                trans->target2initiator_buffer_size) ) {
-          serial_output();
-          serial_high();
-          *trans->status = TRANSACTION_DATA_ERROR;
-          sei();
-          return TRANSACTION_DATA_ERROR;
-      }
-   }
-
-  // initiator switch to output
-  change_reciver2sender();
-
-  // initiator send phase
-  if( trans->initiator2target_buffer_size > 0 ) {
-      serial_send_packet((uint8_t *)trans->initiator2target_buffer,
-                         trans->initiator2target_buffer_size);
-  }
-
-  // always, release the line when not in use
-  sync_send();
-
-  *trans->status = TRANSACTION_END;
-  sei();
-  return TRANSACTION_END;
-}
-
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index) {
-    SSTD_t *trans = &Transaction_table[sstd_index];
-    cli();
-    int retval = *trans->status;
-    *trans->status = 0;;
-    sei();
-    return retval;
-}
-#endif
-
-#endif
-
-// Helix serial.c history
-//   2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
-//   2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
-//             (adjusted with avr-gcc 4.9.2)
-//   2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
-//             (adjusted with avr-gcc 4.9.2)
-//   2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
-//             (adjusted with avr-gcc 4.9.2)
-//   2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
-//             (adjusted with avr-gcc 7.3.0)
-//   2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
-//             (adjusted with avr-gcc 5.4.0, 7.3.0)
-//   2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669)

keyboards/ai03/orbit/serial.h

@@ -1,62 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-
-// /////////////////////////////////////////////////////////////////
-// Need Soft Serial defines in config.h
-// /////////////////////////////////////////////////////////////////
-// ex.
-//  #define SOFT_SERIAL_PIN ??   // ?? = D0,D1,D2,D3,E6
-//  OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
-//                                               //  1: about 137kbps (default)
-//                                               //  2: about 75kbps
-//                                               //  3: about 39kbps
-//                                               //  4: about 26kbps
-//                                               //  5: about 20kbps
-//
-// //// USE simple API (using signle-type transaction function)
-//   /* nothing */
-// //// USE flexible API (using multi-type transaction function)
-//   #define SERIAL_USE_MULTI_TRANSACTION
-//
-// /////////////////////////////////////////////////////////////////
-
-// Soft Serial Transaction Descriptor
-typedef struct _SSTD_t  {
-    uint8_t *status;
-    uint8_t initiator2target_buffer_size;
-    uint8_t *initiator2target_buffer;
-    uint8_t target2initiator_buffer_size;
-    uint8_t *target2initiator_buffer;
-} SSTD_t;
-#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
-
-// initiator is transaction start side
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
-// target is interrupt accept side
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
-
-// initiator resullt
-#define TRANSACTION_END 0
-#define TRANSACTION_NO_RESPONSE 0x1
-#define TRANSACTION_DATA_ERROR  0x2
-#define TRANSACTION_TYPE_ERROR  0x4
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int  soft_serial_transaction(void);
-#else
-int  soft_serial_transaction(int sstd_index);
-#endif
-
-// target status
-// *SSTD_t.status has
-//   initiator:
-//       TRANSACTION_END
-//    or TRANSACTION_NO_RESPONSE
-//    or TRANSACTION_DATA_ERROR
-//   target:
-//       TRANSACTION_DATA_ERROR
-//    or TRANSACTION_ACCEPTED
-#define TRANSACTION_ACCEPTED 0x8
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int  soft_serial_get_and_clean_status(int sstd_index);
-#endif

keyboards/ai03/orbit/split_util.c

@@ -1,87 +0,0 @@
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-#include "config.h"
-#include "timer.h"
-#include "split_flags.h"
-#include "transport.h"
-#include "quantum.h"
-
-#ifdef EE_HANDS
-#   include "tmk_core/common/eeprom.h"
-#   include "eeconfig.h"
-#endif
-
-volatile bool isLeftHand = true;
-
-__attribute__((weak))
-bool is_keyboard_left(void) {
-  #ifdef SPLIT_HAND_PIN
-    // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
-    setPinInput(SPLIT_HAND_PIN);
-    return readPin(SPLIT_HAND_PIN);
-  #else
-    #ifdef EE_HANDS
-      return eeprom_read_byte(EECONFIG_HANDEDNESS);
-    #else
-      #ifdef MASTER_RIGHT
-        return !is_keyboard_master();
-      #else
-        return is_keyboard_master();
-      #endif
-    #endif
-  #endif
-}
-
-bool is_keyboard_master(void)
-{
-#ifdef __AVR__
-  static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
-
-  // only check once, as this is called often
-  if (usbstate == UNKNOWN)
-  {
-    USBCON |= (1 << OTGPADE);  // enables VBUS pad
-    wait_us(5);
-
-    usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE;  // checks state of VBUS
-  }
-
-  return (usbstate == MASTER);
-#else
-  return true;
-#endif
-}
-
-static void keyboard_master_setup(void) {
-#if defined(USE_I2C) || defined(EH)
-  #ifdef SSD1306OLED
-    matrix_master_OLED_init ();
-  #endif
-#endif
-  transport_master_init();
-
-  // For master the Backlight info needs to be sent on startup
-  // Otherwise the salve won't start with the proper info until an update
-  BACKLIT_DIRTY = true;
-}
-
-static void keyboard_slave_setup(void)
-{
-  transport_slave_init();
-}
-
-// this code runs before the usb and keyboard is initialized
-void matrix_setup(void)
-{
-  isLeftHand = is_keyboard_left();
-
-  if (is_keyboard_master())
-  {
-    keyboard_master_setup();
-  }
-  else
-  {
-    keyboard_slave_setup();
-  }
-}

keyboards/ai03/orbit/split_util.h

@@ -1,10 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-extern volatile bool isLeftHand;
-
-void matrix_master_OLED_init (void);

keyboards/ai03/orbit/transport.c

@@ -1,238 +0,0 @@
-
-#include "transport.h"
-
-#include "config.h"
-#include "matrix.h"
-#include "quantum.h"
-
-#include "orbit.h"
-
-#define ROWS_PER_HAND (MATRIX_ROWS/2)
-
-#ifdef RGBLIGHT_ENABLE
-#   include "rgblight.h"
-#endif
-
-#ifdef BACKLIGHT_ENABLE
-# include "backlight.h"
-  extern backlight_config_t backlight_config;
-#endif
-
-#if defined(USE_I2C) || defined(EH)
-
-#include "i2c.h"
-
-#ifndef SLAVE_I2C_ADDRESS
-#  define SLAVE_I2C_ADDRESS           0x32
-#endif
-
-#if (MATRIX_COLS > 8)
-#  error "Currently only supports 8 COLS"
-#endif
-
-// Get rows from other half over i2c
-bool transport_master(matrix_row_t matrix[]) {
-  int err = 0;
-
-  // write backlight info
-#ifdef BACKLIGHT_ENABLE
-  if (BACKLIT_DIRTY) {
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-    if (err) { goto i2c_error; }
-
-    // Backlight location
-    err = i2c_master_write(I2C_BACKLIT_START);
-    if (err) { goto i2c_error; }
-
-    // Write backlight
-    i2c_master_write(get_backlight_level());
-
-    BACKLIT_DIRTY = false;
-  }
-#endif
-
-  err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-  if (err) { goto i2c_error; }
-
-  // start of matrix stored at I2C_KEYMAP_START
-  err = i2c_master_write(I2C_KEYMAP_START);
-  if (err) { goto i2c_error; }
-
-  // Start read
-  err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
-  if (err) { goto i2c_error; }
-
-  if (!err) {
-    int i;
-    for (i = 0; i < ROWS_PER_HAND-1; ++i) {
-      matrix[i] = i2c_master_read(I2C_ACK);
-    }
-    matrix[i] = i2c_master_read(I2C_NACK);
-    i2c_master_stop();
-  } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
-    i2c_reset_state();
-    return false;
-  }
-
-#ifdef RGBLIGHT_ENABLE
-  if (RGB_DIRTY) {
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-    if (err) { goto i2c_error; }
-
-    // RGB Location
-    err = i2c_master_write(I2C_RGB_START);
-    if (err) { goto i2c_error; }
-
-    uint32_t dword = eeconfig_read_rgblight();
-
-    // Write RGB
-    err = i2c_master_write_data(&dword, 4);
-    if (err) { goto i2c_error; }
-
-    RGB_DIRTY = false;
-    i2c_master_stop();
-  }
-#endif
-
-  return true;
-}
-
-void transport_slave(matrix_row_t matrix[]) {
-
-  for (int i = 0; i < ROWS_PER_HAND; ++i)
-  {
-    i2c_slave_buffer[I2C_KEYMAP_START + i] = matrix[i];
-  }
-  // Read Backlight Info
-  #ifdef BACKLIGHT_ENABLE
-  if (BACKLIT_DIRTY)
-  {
-    backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]);
-    BACKLIT_DIRTY = false;
-  }
-  #endif
-  #ifdef RGBLIGHT_ENABLE
-  if (RGB_DIRTY)
-  {
-    // Disable interupts (RGB data is big)
-    cli();
-    // Create new DWORD for RGB data
-    uint32_t dword;
-
-    // Fill the new DWORD with the data that was sent over
-    uint8_t * dword_dat = (uint8_t *)(&dword);
-    for (int i = 0; i < 4; i++)
-    {
-      dword_dat[i] = i2c_slave_buffer[I2C_RGB_START + i];
-    }
-
-    // Update the RGB now with the new data and set RGB_DIRTY to false
-    rgblight_update_dword(dword);
-    RGB_DIRTY = false;
-    // Re-enable interupts now that RGB is set
-    sei();
-  }
-  #endif
-}
-
-void transport_master_init(void) {
-  i2c_master_init();
-}
-
-void transport_slave_init(void) {
-  i2c_slave_init(SLAVE_I2C_ADDRESS);
-}
-
-#else // USE_SERIAL
-
-#include "serial.h"
-
-
-
-volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
-volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
-uint8_t volatile status0 = 0;
-
-SSTD_t transactions[] = {
-  { (uint8_t *)&status0,
-    sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
-    sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
-  }
-};
-
-uint8_t slave_layer_cache;
-uint8_t slave_nlock_cache;
-uint8_t slave_clock_cache;
-uint8_t slave_slock_cache;
-
-void transport_master_init(void)
-{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
-
-void transport_slave_init(void)
-{ 
-	soft_serial_target_init(transactions, TID_LIMIT(transactions)); 
-	slave_layer_cache = 255;
-	slave_nlock_cache = 255;
-	slave_clock_cache = 255;
-	slave_slock_cache = 255;
-}
-
-bool transport_master(matrix_row_t matrix[]) {
-
-  if (soft_serial_transaction()) {
-    return false;
-  }
-
-  // TODO:  if MATRIX_COLS > 8 change to unpack()
-  for (int i = 0; i < ROWS_PER_HAND; ++i) {
-    matrix[i] = serial_s2m_buffer.smatrix[i];
-  }
-
-  #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
-    // Code to send RGB over serial goes here (not implemented yet)
-  #endif
-
-  #ifdef BACKLIGHT_ENABLE
-    // Write backlight level for slave to read
-    serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
-  #endif
-
-  return true;
-}
-
-void transport_slave(matrix_row_t matrix[]) {
-
-  // TODO: if MATRIX_COLS > 8 change to pack()
-  for (int i = 0; i < ROWS_PER_HAND; ++i)
-  {
-    serial_s2m_buffer.smatrix[i] = matrix[i];
-  }
-  #ifdef BACKLIGHT_ENABLE
-    backlight_set(serial_m2s_buffer.backlight_level);
-  #endif
-  #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
-  // Add serial implementation for RGB here
-  #endif
-  
-  if (slave_layer_cache != serial_m2s_buffer.current_layer) {  
-	slave_layer_cache = serial_m2s_buffer.current_layer;
-	set_layer_indicators(slave_layer_cache);
-  }
-  
-  if (slave_nlock_cache != serial_m2s_buffer.nlock_led) {
-	slave_nlock_cache = serial_m2s_buffer.nlock_led;
-	led_toggle(3, slave_nlock_cache);
-  }
-  if (slave_clock_cache != serial_m2s_buffer.clock_led) {
-	slave_clock_cache = serial_m2s_buffer.clock_led;
-	led_toggle(4, slave_clock_cache);
-  }
-  if (slave_slock_cache != serial_m2s_buffer.slock_led) {
-	slave_slock_cache = serial_m2s_buffer.slock_led;
-	led_toggle(5, slave_slock_cache);
-  }
-  
-}
-
-#endif

keyboards/ai03/orbit/transport.h

@@ -1,42 +0,0 @@
-#pragma once
-
-#include <common/matrix.h>
-
-#define ROWS_PER_HAND (MATRIX_ROWS/2)
-
-typedef struct _Serial_s2m_buffer_t {
-  // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
-  matrix_row_t smatrix[ROWS_PER_HAND];
-} Serial_s2m_buffer_t;
-
-typedef struct _Serial_m2s_buffer_t {
-#ifdef BACKLIGHT_ENABLE
-    uint8_t backlight_level;
-#endif
-#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
-    rgblight_config_t rgblight_config; //not yet use
-    //
-    // When MCUs on both sides drive their respective RGB LED chains,
-    // it is necessary to synchronize, so it is necessary to communicate RGB information.
-    // In that case, define the RGBLIGHT_SPLIT macro.
-    //
-    // Otherwise, if the master side MCU drives both sides RGB LED chains,
-    // there is no need to communicate.
-#endif
-
-	uint8_t current_layer;
-	uint8_t nlock_led;
-	uint8_t clock_led;
-	uint8_t slock_led;
-
-} Serial_m2s_buffer_t;
-
-extern volatile Serial_s2m_buffer_t serial_s2m_buffer;
-extern volatile Serial_m2s_buffer_t serial_m2s_buffer;
-
-void transport_master_init(void);
-void transport_slave_init(void);
-
-// returns false if valid data not received from slave
-bool transport_master(matrix_row_t matrix[]);
-void transport_slave(matrix_row_t matrix[]);

keyboards/alice/program

@@ -0,0 +1,106 @@
+#!/usr/bin/env python
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>, Sebastian Kaim <sebb@sebb767.de>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+from __future__ import print_function
+
+import os
+import sys
+import time
+import usb
+
+
+def checkForKeyboardInNormalMode():
+    """Returns a device if a ps2avrGB device in normal made (that is in keyboard mode) or None if it is not found."""
+    return usb.core.find(idVendor=0x20A0, idProduct=0x422D)
+
+def checkForKeyboardInBootloaderMode():
+    """Returns True if a ps2avrGB device in bootloader (flashable) mode is found and False otherwise."""
+    return (usb.core.find(idVendor=0x16c0, idProduct=0x05df) is not None)
+
+def flashKeyboard(firmware_file):
+    """Calls bootloadHID to flash the given file to the device."""
+    print('Flashing firmware to device ...')
+    if os.system('bootloadHID -r "%s"' % firmware_file) == 0:
+        print('\nDone!')
+    else:
+        print('\nbootloadHID returned an error.')
+
+def printDeviceInfo(dev):
+    """Prints all infos for a given USB device"""
+    print('Device Information:')
+    print('  idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
+    print('  idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
+    print('Manufacturer: %s' % (dev.iManufacturer))
+    print('Serial: %s' % (dev.iSerialNumber))
+    print('Product: %s' % (dev.iProduct), end='\n\n')
+
+def sendDeviceToBootloaderMode(dev):
+    """Tries to send a given ps2avrGB keyboard to bootloader mode to allow flashing."""
+    try:
+        dev.set_configuration()
+
+        request_type = usb.util.build_request_type(
+                usb.util.CTRL_OUT,
+                usb.util.CTRL_TYPE_CLASS,
+                usb.util.CTRL_RECIPIENT_DEVICE)
+
+        USBRQ_HID_SET_REPORT = 0x09
+        HID_REPORT_OPTION = 0x0301
+
+        dev.ctrl_transfer(request_type, USBRQ_HID_SET_REPORT, HID_REPORT_OPTION, 0, [0, 0, 0xFF] + [0] * 5)
+    except usb.core.USBError:
+        # for some reason I keep getting USBError, but it works!
+        pass
+
+
+if len(sys.argv) < 2:
+    print('Usage: %s <firmware.hex>' % sys.argv[0])
+    sys.exit(1)
+
+kb = checkForKeyboardInNormalMode()
+
+if kb is not None:
+    print('Found a keyboard in normal mode. Attempting to send it to bootloader mode ...', end='')
+    printDeviceInfo(kb)
+    sendDeviceToBootloaderMode(kb)
+    print(' done.')
+    print("Hint: If your keyboard can't be set to bootloader mode automatically, plug it in while pressing the bootloader key to do so manually.")
+    print("      You can find more infos about this here: https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB#setting-the-board-to-bootloader-mode")
+
+attempts = 12  # 60 seconds
+found = False
+for attempt in range(1, attempts + 1):
+    print("Searching for keyboard in bootloader mode (%i/%i) ... " % (attempt, attempts), end='')
+
+    if checkForKeyboardInBootloaderMode():
+        print('Found', end='\n\n')
+        flashKeyboard(sys.argv[1])
+        found = True
+        break
+    else:
+        print('Nothing.', end='')
+
+        if attempt != attempts:  # no need to wait on the last attempt
+            print(' Sleeping 5 seconds.', end='')
+            time.sleep(5)
+
+        # print a newline
+        print()
+
+if not found:
+    print("Couldn't find a flashable keyboard. Aborting.")
+    sys.exit(2)
+

keyboards/alice/rules.mk

@@ -45,4 +45,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0
 SRC += i2c_master.c
 
 # programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
+PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex

keyboards/amj96/keymaps/default/config.h

@@ -14,7 +14,11 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#pragma once
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
 
+#include "config_common.h"
 
 // place overrides here
+
+#endif

keyboards/amjpad/keymaps/default/keymap.c

@@ -1,5 +1,9 @@
 #include QMK_KEYBOARD_H
 
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+#endif
+
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them

keyboards/atreus/keymaps/dvorak_42_key/keymap.c

@@ -8,21 +8,6 @@
 #define COMBINED  3
 #define BROWSER_CONTROL 4
 
-// aliases
-// shell
-#define SHELL_DEL_WORD RCTL(KC_W)
-// android studio
-
-#define AS_TABLEFT LALT(KC_LEFT)
-#define AS_TABRIGHT LALT(KC_RIGHT)
-#define AS_SYMBOL LCTL(LALT(KC_N))
-#define AS_CLASS LCTL(KC_N)
-#define AS_FINDUSAGE LALT(KC_F7)
-#define AS_BACK LCTL(LALT(KC_LEFT))
-#define AS_GO_DECLARATION LCTL(KC_B)
-#define AS_GO_IMPLEMENTATION LCTL(LALT(KC_B))
-#define AS_CLOSETAB LCTL(KC_F4)
-#define AS_CLOSETOOLWINDOW LCTL(LSFT(KC_F4))
 
 enum custom_keycodes {
   PLACEHOLDER = SAFE_RANGE, // can always be here
@@ -52,10 +37,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [KEYNAV] = LAYOUT(
-    KC_ESC,             AS_GO_IMPLEMENTATION,  RCTL(KC_Z),      RCTL(KC_S),       MEH(KC_A),                           MEH(KC_B),     KC_HOME,    KC_UP,           KC_END,     KC_PGUP,
-    AS_BACK,            AS_SYMBOL,             RSFT(KC_TAB),    KC_TAB,           SHELL_DEL_WORD,                      LCTL(KC_LEFT), KC_LEFT,    KC_DOWN,         KC_RIGHT,   LCTL(KC_RIGHT),
-    AS_FINDUSAGE,       AS_CLASS,              AS_TABLEFT,      AS_TABRIGHT,      AS_CLOSETAB,                         KC_TRNS,       RCTL(KC_C), RCTL(KC_X),      RCTL(KC_V), KC_PGDOWN,
-    AS_CLOSETOOLWINDOW, AS_GO_DECLARATION,     KC_TRNS,         KC_TRNS,          KC_TRNS,          KC_TRNS, KC_ENTER, KC_SPACE,      KC_BSPC,    RCTL(KC_BSPC),   KC_DELETE,  LCTL(KC_DELETE)
+    KC_ESC,      CLOUD9_GOTO_LINE,   RCTL(KC_Z),      RCTL(KC_S),       MEH(KC_F10),                         KC_TRNS,       KC_HOME,    KC_UP,           KC_END,     KC_PGUP,
+    MEH(KC_F11), CLOUD9_GOTO_SYMBOL, RSFT(KC_TAB),    KC_TAB,           MEH(KC_A),                           LCTL(KC_LEFT), KC_LEFT,    KC_DOWN,         KC_RIGHT,   LCTL(KC_RIGHT),
+    MEH(KC_B),   CLOUD9_NAVIGATE,    CLOUD9_TAB_LEFT, CLOUD9_TAB_RIGHT, CLOUD9_TAB_CLOSE,                    KC_TRNS,       RCTL(KC_C), RCTL(KC_X),      RCTL(KC_V), KC_PGDOWN,
+    KC_TRNS,     KC_TRNS,            KC_TRNS,         KC_TRNS,          KC_TRNS,          KC_TRNS, KC_ENTER, KC_SPACE,      KC_BSPC,    RCTL(KC_BSPC),   KC_DELETE,  LCTL(KC_DELETE)
   ),
 
   [KEYSEL] = LAYOUT(

keyboards/atreus62/keymaps/jarred/config.h

@@ -1,21 +0,0 @@
-/* Copyright 2018 Jarred Steenvoorden
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// My hand wire diodes are in the opposite direction to the Atreus62 PCB
-#undef DIODE_DIRECTION
-#define DIODE_DIRECTION COL2ROW

keyboards/atreus62/keymaps/jarred/keymap.c

@@ -1,26 +0,0 @@
-/* Copyright 2018 Jarred Steenvoorden
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
- 
-#include QMK_KEYBOARD_H
-#include "jarred.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [_QW] = LAYOUT_atreus62_grid_wrapper(BLANK_12, QWERTY_1_12, QWERTY_2_12, QWERTY_3_12, QWERTY_L4, KC_NO, KC_NO, QWERTY_R4),
-    [_LW] = LAYOUT_atreus62_grid_wrapper(BLANK_12, LOWER_1_12 , LOWER_2_12 , LOWER_3_12 , LOWER_L4 , KC_NO, KC_NO, LOWER_R4 ),
-    [_NV] = LAYOUT_atreus62_grid_wrapper(BLANK_12, NAV_1_12   , NAV_2_12   , NAV_3_12   , NAV_L4   , KC_NO, KC_NO, NAV_R4   ),
-    [_NP] = LAYOUT_atreus62_grid_wrapper(BLANK_12, NUMPAD_1_12, NUMPAD_2_12, NUMPAD_3_12, NUMPAD_L4, KC_NO, KC_NO, NUMPAD_R4),
-    [_MS] = LAYOUT_atreus62_grid_wrapper(BLANK_12, MOUSE_1_12 , MOUSE_2_12 , MOUSE_3_12 , MOUSE_L4 , KC_NO, KC_NO, MOUSE_R4 )
-};

keyboards/bm16a/bm16a.c

@@ -1,43 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "bm16a.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/bm16a/bm16a.h

@@ -1,39 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "quantum.h"
-
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT_ortho_4x4( \
-	K01, K02, K03, K04, \
-	K11, K12, K13, K14, \
-	K21, K22, K23, K24, \
-	K31, K32, K33, K34 \
-) \
-{ \
-  { K01, K02, K03, K04 }, \
-  { K11, K12, K13, K14 }, \
-  { K21, K22, K23, K24 }, \
-  { K31, K32, K33, K34 } \
-}

keyboards/bm16a/config.h

@@ -1,246 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x424D
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    KPrepublic
-#define PRODUCT         bm16a
-#define DESCRIPTION     KPrepublic bm16a
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D3, D5, D1, D2}
-#define MATRIX_COL_PINS { D6, D4, D7, B4}
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-#define BACKLIGHT_PIN B6
-// #define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 5
-
-#define RGB_DI_PIN E2
-#define RGBLED_NUM 4
-#define RGBLIGHT_ANIMATIONS
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-//   #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP           H
-//#define MAGIC_KEY_HELP_ALT       SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER0_ALT     GRAVE
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     B
-//#define MAGIC_KEY_BOOTLOADER_ALT ESC
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/bm16a/info.json

@@ -1,30 +0,0 @@
-{
-    "keyboard_name": "bm16a",
-    "url": "",
-    "maintainer": "qmk",
-    "width": 4,
-    "height": 4,
-    "layouts": {
-      "LAYOUT_ortho_4x4": {
-        "key_count": 16,
-        "layout": [
-          {"x":0, "y":0},
-          {"x":1, "y":0},
-          {"x":2, "y":0},
-          {"x":3, "y":0},
-          {"x":0, "y":1},
-          {"x":1, "y":1},
-          {"x":2, "y":1},
-          {"x":3, "y":1},
-          {"x":0, "y":2},
-          {"x":1, "y":2},
-          {"x":2, "y":2},
-          {"x":3, "y":2},
-          {"x":0, "y":3},
-          {"x":1, "y":3},
-          {"x":2, "y":3},
-          {"x":3, "y":3}
-        ]
-      }
-    }
-  }

keyboards/bm16a/keymaps/default/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/bm16a/keymaps/default/keymap.c

@@ -1,73 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-enum layers {
-  _BASE = 0,
-  _FN1,
-  _FN2,
-};
-
-// Defines the keycodes used by our macros in process_record_user
-enum custom_keycodes {
-  QMKBEST = SAFE_RANGE,
-  QMKURL
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  [_BASE] = LAYOUT_ortho_4x4(
-    KC_PGUP,  KC_HOME,  KC_UP,    KC_END , \
-    KC_PGDN,  KC_LEFT,  KC_DOWN,  KC_RGHT, \
-    MO(_FN2), KC_VOLU,  KC_MPLY,  KC_MPRV, \
-    MO(_FN1), KC_VOLD,  KC_MUTE,  KC_MNXT  \
-  ),
-  [_FN1] = LAYOUT_ortho_4x4(
-    KC_ESC,   KC_P7,    KC_P8,    KC_P9,   \
-    KC_TAB,   KC_P4,    KC_P5,    KC_P6,   \
-    KC_ENT,   KC_P1,    KC_P2,    KC_P3,   \
-    _______,  KC_P0,    KC_P0,    KC_DOT   \
-  ),
-  [_FN2] = LAYOUT_ortho_4x4(
-    RGB_TOG,  RGB_HUI,  RGB_SAI,  RGB_VAI, \
-    RGB_MOD,  RGB_HUD,  RGB_SAD,  RGB_VAD, \
-    _______,  _______,  _______,  RESET,   \
-    BL_STEP,  _______,  QMKBEST,  QMKURL   \
-  )
-
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QMKBEST:
-      if (record->event.pressed) {
-        // when keycode QMKBEST is pressed
-        SEND_STRING("QMK is the best thing ever!");
-      } else {
-        // when keycode QMKBEST is released
-      }
-      break;
-    case QMKURL:
-      if (record->event.pressed) {
-        // when keycode QMKURL is pressed
-        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
-      } else {
-        // when keycode QMKURL is released
-      }
-      break;
-  }
-  return true;
-}

keyboards/bm16a/keymaps/default/readme.md

@@ -1 +0,0 @@
-# The default keymap for bm16a

keyboards/bm16a/readme.md

@@ -1,15 +0,0 @@
-# bm16a
-
-![bm16a](https://ae01.alicdn.com/kf/HTB1RRRQaZfrK1RjSszcq6xGGFXaY.jpg)
-
-A 16 key macropad, with USB C, RGB underglow and backlight.
-
-Keyboard Maintainer: QMK Community  
-Hardware Supported: The PCBs, controllers supported  
-Hardware Availability: [KPrepublic](https://kprepublic.com/products/bm16a-16-keys-custom-mechanical-keyboard-pcb-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-bottom-underglow-alps-mx); [AliExpress](https://www.aliexpress.com/store/product/bm16a-16-keys-Custom-Mechanical-Keyboard-PCB-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-bottom/3034003_32970629907.html)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make bm16a:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bm16a/rules.mk

@@ -1,82 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-BOOTLOADER = atmel-dfu
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
-
-LAYOUTS = ortho_4x4

keyboards/bpiphany/tiger_lily/keymaps/default/config.h

@@ -1,3 +1,8 @@
-#pragma once
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
 
 // place overrides here
+
+#endif

keyboards/bpiphany/unloved_bastard/keymaps/default/config.h

@@ -14,6 +14,11 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#pragma once
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
 
 // place overrides here
+
+#endif

keyboards/candybar/keymaps/default/keymap.c

@@ -14,7 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include QMK_KEYBOARD_H
+#include "candybar.h"
 
 #define _BL 0
 #define _FL 1
@@ -35,4 +35,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TAB,KC_A,KC_SLCK,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \
   KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NLCK,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \
   KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT),
-};
+};

keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -1,109 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
-};
-#endif
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
- */
-void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
-}
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-}

keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -1,922 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#ifndef BOARD_H
-#define BOARD_H
-
-/*
- * Setup for ST STM32F072B-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32F072B_DISCOVERY
-#define BOARD_NAME                  "ST STM32F072B-Discovery"
-
-/*
- * Board oscillators-related settings.
- * NOTE: HSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK                32768
-#endif
-
-#define STM32_LSEDRV                (3U << 3U)
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK                0U
-#endif
-
-#define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F072xB
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON                0U
-#define GPIOA_PIN1                  1U
-#define GPIOA_PIN2                  2U
-#define GPIOA_PIN3                  3U
-#define GPIOA_PIN4                  4U
-#define GPIOA_PIN5                  5U
-#define GPIOA_PIN6                  6U
-#define GPIOA_PIN7                  7U
-#define GPIOA_PIN8                  8U
-#define GPIOA_PIN9                  9U
-#define GPIOA_PIN10                 10U
-#define GPIOA_USB_DM                11U
-#define GPIOA_USB_DP                12U
-#define GPIOA_SWDIO                 13U
-#define GPIOA_SWCLK                 14U
-#define GPIOA_PIN15                 15U
-
-#define GPIOB_PIN0                  0U
-#define GPIOB_PIN1                  1U
-#define GPIOB_PIN2                  2U
-#define GPIOB_PIN3                  3U
-#define GPIOB_PIN4                  4U
-#define GPIOB_PIN5                  5U
-#define GPIOB_PIN6                  6U
-#define GPIOB_PIN7                  7U
-#define GPIOB_PIN8                  8U
-#define GPIOB_PIN9                  9U
-#define GPIOB_PIN10                 10U
-#define GPIOB_PIN11                 11U
-#define GPIOB_PIN12                 12U
-#define GPIOB_SPI2_SCK              13U
-#define GPIOB_SPI2_MISO             14U
-#define GPIOB_SPI2_MOSI             15U
-
-#define GPIOC_MEMS_CS               0U
-#define GPIOC_PIN1                  1U
-#define GPIOC_PIN2                  2U
-#define GPIOC_PIN3                  3U
-#define GPIOC_PIN4                  4U
-#define GPIOC_PIN5                  5U
-#define GPIOC_LED_RED               6U
-#define GPIOC_LED_BLUE              7U
-#define GPIOC_LED_ORANGE            8U
-#define GPIOC_LED_GREEN             9U
-#define GPIOC_PIN10                 10U
-#define GPIOC_PIN11                 11U
-#define GPIOC_PIN12                 12U
-#define GPIOC_PIN13                 13U
-#define GPIOC_OSC32_IN              14U
-#define GPIOC_OSC32_OUT             15U
-
-#define GPIOD_PIN0                  0U
-#define GPIOD_PIN1                  1U
-#define GPIOD_PIN2                  2U
-#define GPIOD_PIN3                  3U
-#define GPIOD_PIN4                  4U
-#define GPIOD_PIN5                  5U
-#define GPIOD_PIN6                  6U
-#define GPIOD_PIN7                  7U
-#define GPIOD_PIN8                  8U
-#define GPIOD_PIN9                  9U
-#define GPIOD_PIN10                 10U
-#define GPIOD_PIN11                 11U
-#define GPIOD_PIN12                 12U
-#define GPIOD_PIN13                 13U
-#define GPIOD_PIN14                 14U
-#define GPIOD_PIN15                 15U
-
-#define GPIOE_PIN0                  0U
-#define GPIOE_PIN1                  1U
-#define GPIOE_PIN2                  2U
-#define GPIOE_PIN3                  3U
-#define GPIOE_PIN4                  4U
-#define GPIOE_PIN5                  5U
-#define GPIOE_PIN6                  6U
-#define GPIOE_PIN7                  7U
-#define GPIOE_PIN8                  8U
-#define GPIOE_PIN9                  9U
-#define GPIOE_PIN10                 10U
-#define GPIOE_PIN11                 11U
-#define GPIOE_PIN12                 12U
-#define GPIOE_PIN13                 13U
-#define GPIOE_PIN14                 14U
-#define GPIOE_PIN15                 15U
-
-#define GPIOF_OSC_IN                0U
-#define GPIOF_OSC_OUT               1U
-#define GPIOF_PIN2                  2U
-#define GPIOF_PIN3                  3U
-#define GPIOF_PIN4                  4U
-#define GPIOF_PIN5                  5U
-#define GPIOF_PIN6                  6U
-#define GPIOF_PIN7                  7U
-#define GPIOF_PIN8                  8U
-#define GPIOF_PIN9                  9U
-#define GPIOF_PIN10                 10U
-#define GPIOF_PIN11                 11U
-#define GPIOF_PIN12                 12U
-#define GPIOF_PIN13                 13U
-#define GPIOF_PIN14                 14U
-#define GPIOF_PIN15                 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
-#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
-#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
-
-#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
-#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
-#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
-
-#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
-#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
-#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
-#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
-#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
-#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
-#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
-
-
-
-#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
-#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
-#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
-#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
-#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
-#define PIN_ODR_LOW(n)              (0U << (n))
-#define PIN_ODR_HIGH(n)             (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
-#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
-#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
-#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
-#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
-#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
-#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
-#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
-#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0  - BUTTON                    (input floating).
- * PA1  - PIN1                      (input pullup).
- * PA2  - PIN2                      (input pullup).
- * PA3  - PIN3                      (input pullup).
- * PA4  - PIN4                      (input pullup).
- * PA5  - PIN5                      (input pullup).
- * PA6  - PIN6                      (input pullup).
- * PA7  - PIN7                      (input pullup).
- * PA8  - PIN8                      (input pullup).
- * PA9  - PIN9                      (input pullup).
- * PA10 - PIN10                     (input pullup).
- * PA11 - USB_DM                    (input floating).
- * PA12 - USB_DP                    (input floating).
- * PA13 - SWDIO                     (alternate 0).
- * PA14 - SWCLK                     (alternate 0).
- * PA15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
-                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
-                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
-                                     PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
-                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
-                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
-                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
-                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
-                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
-                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
-                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
-                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
-                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
-                                     PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
-#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
-
-/*
- * GPIOB setup:
- *
- * PB0  - PIN0                      (input pullup).
- * PB1  - PIN1                      (input pullup).
- * PB2  - PIN2                      (input pullup).
- * PB3  - PIN3                      (input pullup).
- * PB4  - PIN4                      (input pullup).
- * PB5  - PIN5                      (input pullup).
- * PB6  - PIN6                      (input pullup).
- * PB7  - PIN7                      (input pullup).
- * PB8  - PIN8                      (input pullup).
- * PB9  - PIN9                      (input pullup).
- * PB10 - PIN10                     (input pullup).
- * PB11 - PIN11                     (input pullup).
- * PB12 - PIN12                     (input pullup).
- * PB13 - SPI2_SCK                  (alternate 0).
- * PB14 - SPI2_MISO                 (alternate 0).
- * PB15 - SPI2_MOSI                 (alternate 0).
- */
-#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
-#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
-                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
-                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
-
-/*
- * GPIOC setup:
- *
- * PC0  - MEMS_CS                   (output pushpull maximum).
- * PC1  - PIN1                      (input pullup).
- * PC2  - PIN2                      (input pullup).
- * PC3  - PIN3                      (input pullup).
- * PC4  - PIN4                      (input pullup).
- * PC5  - PIN5                      (input pullup).
- * PC6  - LED_RED                   (output pushpull maximum).
- * PC7  - LED_BLUE                  (output pushpull maximum).
- * PC8  - LED_ORANGE                (output pushpull maximum).
- * PC9  - LED_GREEN                 (output pushpull maximum).
- * PC10 - PIN10                     (input pullup).
- * PC11 - PIN11                     (input pullup).
- * PC12 - PIN12                     (input pullup).
- * PC13 - PIN13                     (input pullup).
- * PC14 - OSC32_IN                  (input floating).
- * PC15 - OSC32_OUT                 (input floating).
- */
-#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
-                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
-                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
-                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
-                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
-                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
-                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
-                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
-                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
-                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
-                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
-                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
-                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
-                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
-                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
-#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
-                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
-                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
-                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
-
-/*
- * GPIOD setup:
- *
- * PD0  - PIN0                      (input pullup).
- * PD1  - PIN1                      (input pullup).
- * PD2  - PIN2                      (input pullup).
- * PD3  - PIN3                      (input pullup).
- * PD4  - PIN4                      (input pullup).
- * PD5  - PIN5                      (input pullup).
- * PD6  - PIN6                      (input pullup).
- * PD7  - PIN7                      (input pullup).
- * PD8  - PIN8                      (input pullup).
- * PD9  - PIN9                      (input pullup).
- * PD10 - PIN10                     (input pullup).
- * PD11 - PIN11                     (input pullup).
- * PD12 - PIN12                     (input pullup).
- * PD13 - PIN13                     (input pullup).
- * PD14 - PIN14                     (input pullup).
- * PD15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
-#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
-
-/*
- * GPIOE setup:
- *
- * PE0  - PIN0                      (input pullup).
- * PE1  - PIN1                      (input pullup).
- * PE2  - PIN2                      (input pullup).
- * PE3  - PIN3                      (input pullup).
- * PE4  - PIN4                      (input pullup).
- * PE5  - PIN5                      (input pullup).
- * PE6  - PIN6                      (input pullup).
- * PE7  - PIN7                      (input pullup).
- * PE8  - PIN8                      (input pullup).
- * PE9  - PIN9                      (input pullup).
- * PE10 - PIN10                     (input pullup).
- * PE11 - PIN11                     (input pullup).
- * PE12 - PIN12                     (input pullup).
- * PE13 - PIN13                     (input pullup).
- * PE14 - PIN14                     (input pullup).
- * PE15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
-#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
-#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
-
-/*
- * GPIOF setup:
- *
- * PF0  - OSC_IN                    (input floating).
- * PF1  - OSC_OUT                   (input floating).
- * PF2  - PIN2                      (input pullup).
- * PF3  - PIN3                      (input pullup).
- * PF4  - PIN4                      (input pullup).
- * PF5  - PIN5                      (input pullup).
- * PF6  - PIN6                      (input pullup).
- * PF7  - PIN7                      (input pullup).
- * PF8  - PIN8                      (input pullup).
- * PF9  - PIN9                      (input pullup).
- * PF10 - PIN10                     (input pullup).
- * PF11 - PIN11                     (input pullup).
- * PF12 - PIN12                     (input pullup).
- * PF13 - PIN13                     (input pullup).
- * PF14 - PIN14                     (input pullup).
- * PF15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
-                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
-                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
-                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
-                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
-                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
-                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
-                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
-#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* BOARD_H */

keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg

@@ -1,703 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!-- STM32F0xx board Template -->
-<board
-  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
-  <configuration_settings>
-    <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
-    <output_path>..</output_path>
-    <hal_version>3.0.x</hal_version>
-  </configuration_settings>
-  <board_name>ST STM32F072B-Discovery</board_name>
-  <board_id>ST_STM32F072B_DISCOVERY</board_id>
-  <board_functions></board_functions>
-  <subtype>STM32F072xB</subtype>
-  <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
-  	LSEBypass="false" LSEDrive="3 High Drive (default)" />
-  <ports>
-    <GPIOA>
-      <pin0
-        ID="BUTTON"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin1
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin7
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin8
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin9
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID="USB_DM"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID="USB_DP"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID="SWDIO"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-      <pin14
-        ID="SWCLK"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullDown"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-      <pin15
-        ID=""
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-    </GPIOA>
-    <GPIOB>
-      <pin0
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin1
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin7
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin8
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin9
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID="SPI2_SCK"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-      <pin14
-        ID="SPI2_MISO"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-      <pin15
-        ID="SPI2_MOSI"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Alternate"
-        Alternate="0" />
-    </GPIOB>
-    <GPIOC>
-      <pin0
-        ID="MEMS_CS"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Output"
-        Alternate="0" />
-      <pin1
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID="LED_RED"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="Low"
-        Mode="Output"
-        Alternate="0" />
-      <pin7
-        ID="LED_BLUE"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="Low"
-        Mode="Output"
-        Alternate="0" />
-      <pin8
-        ID="LED_ORANGE"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="Low"
-        Mode="Output"
-        Alternate="0" ></pin8>
-      <pin9
-        ID="LED_GREEN"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="Low"
-        Mode="Output"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin14
-        ID="OSC32_IN"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin15
-        ID="OSC32_OUT"
-        Type="PushPull"
-        Speed="Maximum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-    </GPIOC>
-    <GPIOD>
-      <pin0
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin1
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin7
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin8
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin9
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin14
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin15
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-    </GPIOD>
-    <GPIOE>
-    	<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    	<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
-    		Level="High" Mode="Input" Alternate="0" />
-    </GPIOE>
-    <GPIOF>
-      <pin0
-        ID="OSC_IN"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin1
-        ID="OSC_OUT"
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="Floating"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin2
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin3
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin4
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin5
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin6
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin7
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin8
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin9
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin10
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin11
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin12
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin13
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin14
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-      <pin15
-        ID=""
-        Type="PushPull"
-        Speed="Minimum"
-        Resistor="PullUp"
-        Level="High"
-        Mode="Input"
-        Alternate="0" />
-    </GPIOF>
-  </ports>
-</board>

keyboards/cannonkeys/instant60/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/cannonkeys/instant60/chconf.h

@@ -1,524 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION                32
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY                 10000
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#define CH_CFG_ST_TIMEDELTA                 2
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM                 0
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE                 0
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE              TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED               FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_TM                       FALSE
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY                 TRUE
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT                 TRUE
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES               TRUE
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES                  TRUE
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS                 TRUE
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS                   TRUE
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES                 TRUE
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES                TRUE
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE                  FALSE
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP                     FALSE
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS                 FALSE
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC                  FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS                   FALSE
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS                FALSE
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS               FALSE
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK           FALSE
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS                 FALSE
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING            FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note    It is invoked from within @p chThdInit() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */

keyboards/cannonkeys/instant60/config.h

@@ -1,92 +0,0 @@
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xCA04
-#define PRODUCT_ID      0x1600
-#define DEVICE_VER      0x0001
-/* in python2: list(u"whatever".encode('utf-16-le')) */
-/*   at most 32 characters or the ugly hack in usb_main.c borks */
-#define MANUFACTURER CannonKeys
-#define PRODUCT Instant60
-#define DESCRIPTION Instant 60 Keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-#define MATRIX_COL_PINS { B2, B10, B11, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15 }
-#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
-#define DIODE_DIRECTION COL2ROW
-
-#define BACKLIGHT_LEVELS 6
-#define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define RGBLIGHT_ANIMATIONS
-
-#define WS2812_LED_N 14
-#define RGBLED_NUM WS2812_LED_N
-#define PORT_WS2812     GPIOB
-#define PIN_WS2812      15
-#define WS2812_SPI SPID2
-
-
-// EEPROM usage
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x01
-#define EEPROM_VERSION_ADDR 34
-
-#define EEPROM_CUSTOM_BACKLIGHT 804
-
-
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION

keyboards/cannonkeys/instant60/halconf.h

@@ -1,354 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                 TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                 FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                 FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT                 FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 TRUE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                 FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                 FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI             FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 TRUE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL              FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 TRUE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                 TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                 FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE          TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY           FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS              TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY              100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT             FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE      38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE         16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE     1
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */

keyboards/cannonkeys/instant60/instant60.c

@@ -1 +0,0 @@
-#include "instant60.h"

keyboards/cannonkeys/instant60/instant60.h

@@ -1,17 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT_default( \
-  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
-  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1E, \
-  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,          K2E, \
-  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \
-  K40, K41,  K42,              K45,             K49,  K4A,  K4B,  K4E \
-) { \
-  {  K00,  K01,  K02,  K03,  K04,    K05,    K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,    K0D,   KC_NO}, \
-  {  K10,  K11,  K12,  K13,  K14,    K15,    K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,    KC_NO, K1E   }, \
-  {  K20,  K21,  K22,  K23,  K24,    K25,    K26,    K27,    K28,    K29,  K2A,  K2B,  KC_NO,  KC_NO, K2E  }, \
-  {  K30,  K31,  K32,  K33,  K34,    K35,    K36,    K37,    K38,    K39,  K3A,  K3B,  KC_NO,  KC_NO, KC_NO  }, \
-  {  K40,  K41,  K42,  KC_NO,  KC_NO,  K45,  KC_NO,  KC_NO,  KC_NO,  K49,  K4A,  K4B,  KC_NO,  KC_NO, K4E  }  \
-}