Merge branch 'develop' of github.com:qmk/qmk_firmware into develop

Co-authored-by: Nick Brassel <nick@tzarc.org>

.gitignore

@@ -45,7 +45,6 @@ quantum/version.h
 .idea/
 .project
 .settings/
-.vagrant/
 
 # ?
 .dep

Vagrantfile

@@ -1,95 +0,0 @@
-# -*- mode: ruby -*-
-# vi: set ft=ruby :
-
-Vagrant.configure(2) do |config|
-  # define a name instead of just 'default'
-  config.vm.define "qmk_firmware"
-
-  # VMware/Virtualbox ( and also Hyperv/Parallels) 64 bit
-  config.vm.box = "generic/debian10"
-  
-  config.vm.synced_folder '.', '/vagrant'
-
-  # This section allows you to customize the Virtualbox VM
-  # settings, ie showing the GUI or upping the memory
-  # or cores if desired
-  config.vm.provider "virtualbox" do |vb|
-    # Hide the VirtualBox GUI when booting the machine
-    vb.gui = false
-    # Uncomment the below lines if you want to program
-    # your Teensy via the VM rather than your host OS
-    #vb.customize ['modifyvm', :id, '--usb', 'on']
-    #vb.customize ['usbfilter', 'add', '0',
-    #         '--target', :id,
-    #         '--name', 'teensy',
-    #         '--vendorid', '0x16c0',
-    #         '--productid','0x0478'
-    #        ]
-    # Customize the amount of memory on the VM:
-    vb.memory = "512"
-    # Uncomment the below lines if you have time sync
-    # issues with make and incremental builds
-    #vb.customize [ "guestproperty", "set", :id, "/VirtualBox/GuestAdd/VBoxService/--timesync-set-threshold", 1000 ]
-  end
-
-  # This section allows you to customize the VMware VM
-  # settings, ie showing the GUI or upping the memory
-  # or cores if desired
-  config.vm.provider "vmware_workstation" do |vmw|
-    # Hide the VMware GUI when booting the machine
-    vmw.gui = false
-
-    # Customize the amount of memory on the VM:
-    vmw.memory = "512"
-  end
-
-  config.vm.provider "vmware_fusion" do |vmf|
-    # Hide the vmfare GUI when booting the machine
-    vmf.gui = false
-
-    # Customize the amount of memory on the VM:
-    vmf.memory = "512"
-  end
-
-  # Docker provider pulls from hub.docker.com respecting docker.image if
-  # config.vm.box is nil. In this case, we adhoc build util/vagrant/Dockerfile.
-  # Note that this bind-mounts from the current dir to
-  # /vagrant in the guest, so unless your UID is 1000 to match vagrant in the
-  # image, you'll need to: chmod -R a+rw .
-  config.vm.provider "docker" do |docker, override|
-    override.vm.box = nil
-    docker.build_dir = "util/vagrant"
-    docker.has_ssh = true
-  end
-
-  # Unless we are running the docker container directly
-  #   1. run container detached on vm
-  #   2. attach on 'vagrant ssh'
-  ["virtualbox", "vmware_workstation", "vmware_fusion"].each do |type|
-    config.vm.provider type do |virt, override|
-      override.vm.provision "docker" do |d|
-        d.run "qmkfm/qmk_cli",
-          cmd: "tail -f /dev/null",
-          args: "--privileged -v /dev:/dev -v '/vagrant:/vagrant'"
-      end
-
-      override.vm.provision "shell", inline: <<-SHELL
-        echo 'docker restart qmkfm-qmk_cli && exec docker exec -it qmkfm-qmk_cli /bin/bash -l' >> ~vagrant/.bashrc
-      SHELL
-    end
-  end
-
-  config.vm.post_up_message = <<-EOT
-
-  Log into the environment using 'vagrant ssh'. QMK directory synchronized with
-  host is located at /vagrant
-  To compile the .hex files use make command inside this directory, e.g.
-     cd /vagrant
-     make <keyboard>:default
-
-  Examples:
-     make planck/rev4:default:dfu
-     make planck/rev4:default
-
-  EOT
-end

builddefs/converters.mk

@@ -7,7 +7,12 @@ endif
 
 # TODO: opt in rather than assume everything uses a pro micro
 PIN_COMPATIBLE ?= promicro
+
+# Remove whitespace from any rule.mk provided vars
+#   - env cannot be overwritten but cannot have whitespace anyway
+CONVERT_TO:=$(strip $(CONVERT_TO))
 ifneq ($(CONVERT_TO),)
+
     # stash so we can overwrite env provided vars if needed
     ACTIVE_CONVERTER=$(CONVERT_TO)
 
@@ -23,13 +28,13 @@ ifneq ($(CONVERT_TO),)
     TARGET := $(TARGET)_$(CONVERT_TO)
 
     # Configure any defaults
-    OPT_DEFS += -DCONVERT_TO_$(strip $(shell echo $(CONVERT_TO) | tr '[:lower:]' '[:upper:]'))
-    OPT_DEFS += -DCONVERTER_TARGET=\"$(strip $(CONVERT_TO))\"
+    OPT_DEFS += -DCONVERT_TO_$(shell echo $(CONVERT_TO) | tr '[:lower:]' '[:upper:]')
+    OPT_DEFS += -DCONVERTER_TARGET=\"$(CONVERT_TO)\"
     OPT_DEFS += -DCONVERTER_ENABLED
     VPATH += $(CONVERTER)
 
     # Configure for "alias" - worst case it produces an idential define
-    OPT_DEFS += -DCONVERT_TO_$(strip $(shell echo $(ACTIVE_CONVERTER) | tr '[:lower:]' '[:upper:]'))
+    OPT_DEFS += -DCONVERT_TO_$(shell echo $(ACTIVE_CONVERTER) | tr '[:lower:]' '[:upper:]')
 
     # Finally run any converter specific logic
     include $(CONVERTER)/converter.mk

data/mappings/defaults.hjson

@@ -74,6 +74,11 @@
             "processor": "RP2040",
             "bootloader": "rp2040",
             "board": "QMK_PM2040"
+        },
+        "liatris": {
+            "processor": "RP2040",
+            "bootloader": "rp2040",
+            "board": "QMK_PM2040"
         }
     }
 }

data/schemas/keyboard.jsonschema

@@ -35,7 +35,7 @@
         },
         "development_board": {
             "type": "string",
-            "enum": ["promicro", "elite_c", "elite_pi", "proton_c", "kb2040", "promicro_rp2040", "blok", "michi", "bit_c_pro", "stemcell", "bluepill", "blackpill_f401", "blackpill_f411", "bonsai_c4", "helios"]
+            "enum": ["promicro", "elite_c", "elite_pi", "proton_c", "kb2040", "promicro_rp2040", "blok", "michi", "bit_c_pro", "stemcell", "bluepill", "blackpill_f401", "blackpill_f411", "bonsai_c4", "helios", "liatris"]
         },
         "pin_compatible": {
             "type": "string",

docs/_summary.md

@@ -41,7 +41,6 @@
     * [Keymap Overview](keymap.md)
     * Development Environments
       * [Docker Guide](getting_started_docker.md)
-      * [Vagrant Guide](getting_started_vagrant.md)
     * Flashing
       * [Flashing](flashing.md)
       * [Flashing ATmega32A (ps2avrgb)](flashing_bootloadhid.md)

docs/feature_converters.md

@@ -21,11 +21,13 @@ Currently the following converters are available:
 | `promicro` | `rp2040_ce`       |
 | `promicro` | `elite_pi`        |
 | `promicro` | `helios`          |
+| `promicro` | `liatris`         |
 | `promicro` | `michi`           |
 | `elite_c`  | `stemcell`        |
 | `elite_c`  | `rp2040_ce`       |
 | `elite_c`  | `elite_pi`        |
 | `elite_c`  | `helios`          |
+| `elite_c`  | `liatris`         |
 
 See below for more in depth information on each converter.
 
@@ -88,6 +90,7 @@ If a board currently supported in QMK uses a [Pro Micro](https://www.sparkfun.co
 | [customMK Bonsai C4](https://shop.custommk.com/products/bonsai-c4-microcontroller-board) | `bonsai_c4`       |
 | [Elite-Pi](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040)         | `elite_pi`        |
 | [0xCB Helios](https://keeb.supply/products/0xcb-helios)                                  | `helios`          |
+| [Liatris](https://splitkb.com/products/liatris)                                          | `liatris`         |
 | [Michi](https://github.com/ci-bus/michi-promicro-rp2040)                                 | `michi`           |
 
 Converter summary:
@@ -104,6 +107,7 @@ Converter summary:
 | `rp2040_ce`       | `-e CONVERT_TO=rp2040_ce`       | `CONVERT_TO=rp2040_ce`       | `#ifdef CONVERT_TO_RP2040_CE`       |
 | `elite_pi`        | `-e CONVERT_TO=elite_pi`        | `CONVERT_TO=elite_pi`        | `#ifdef CONVERT_TO_ELITE_PI`        |
 | `helios`          | `-e CONVERT_TO=helios`          | `CONVERT_TO=helios`          | `#ifdef CONVERT_TO_HELIOS`          |
+| `liatris`         | `-e CONVERT_TO=liatris`         | `CONVERT_TO=liatris`         | `#ifdef CONVERT_TO_LIATRIS`         |
 | `michi`           | `-e CONVERT_TO=michi`           | `CONVERT_TO=michi`           | `#ifdef CONVERT_TO_MICHI`           |
 
 ### Proton C :id=proton_c
@@ -168,7 +172,7 @@ The Bonsai C4 only has one on-board LED (B2), and by default, both the Pro Micro
 #define B0 PAL_LINE(GPIOA, 9)
 ```
 
-### RP2040 Community Edition - Elite-Pi and Helios :id=rp2040_ce
+### RP2040 Community Edition - Elite-Pi, Helios, and Liatris :id=rp2040_ce
 
 Feature set currently identical to [Adafruit KB2040](#kb2040).
 
@@ -185,6 +189,7 @@ If a board currently supported in QMK uses an [Elite-C](https://keeb.io/products
 | [STeMCell](https://github.com/megamind4089/STeMCell)                             | `stemcell`        |
 | [Elite-Pi](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040) | `elite_pi`        |
 | [0xCB Helios](https://keeb.supply/products/0xcb-helios)                          | `helios`          |
+| [Liatris](https://splitkb.com/products/liatris)                                  | `liatris`         |
 
 Converter summary:
 
@@ -194,6 +199,7 @@ Converter summary:
 | `rp2040_ce`       | `-e CONVERT_TO=rp2040_ce`       | `CONVERT_TO=rp2040_ce`       | `#ifdef CONVERT_TO_RP2040_CE`       |
 | `elite_pi`        | `-e CONVERT_TO=elite_pi`        | `CONVERT_TO=elite_pi`        | `#ifdef CONVERT_TO_ELITE_PI`        |
 | `helios`          | `-e CONVERT_TO=helios`          | `CONVERT_TO=helios`          | `#ifdef CONVERT_TO_HELIOS`          |
+| `liatris`         | `-e CONVERT_TO=liatris`         | `CONVERT_TO=liatris`         | `#ifdef CONVERT_TO_LIATRIS`         |
 
 ### STeMCell :id=stemcell_elite
 

docs/getting_started_vagrant.md

@@ -1,56 +0,0 @@
-# Vagrant Quick Start
-
-This project includes a `Vagrantfile` that will allow you to build a new firmware for your keyboard very easily without major changes to your primary operating system. This also ensures that when you clone the project and perform a build, you have the exact same environment as anyone else using the Vagrantfile to build. This makes it much easier for people to help you troubleshoot any issues you encounter.
-
-## Requirements
-
-Using the `Vagrantfile` in this repository requires you have [Vagrant](https://www.vagrantup.com/) as well as a supported provider installed:
-
-* [VirtualBox](https://www.virtualbox.org/) (Version at least 5.0.12)
-  * Sold as 'the most accessible platform to use Vagrant'
-* [VMware Workstation](https://www.vmware.com/products/workstation) and [Vagrant VMware plugin](https://www.vagrantup.com/vmware)
-  * The (paid) VMware plugin requires a licensed copy of VMware Workstation/Fusion
-* [Docker](https://www.docker.com/)
-
-Other than having Vagrant, a suitable provider installed and possibly a restart of your computer afterwards, you can simple run a 'vagrant up' anywhere inside the folder where you checked out this project and it will start an environment (either a virtual machine or container) that contains all the tools required to build this project. There is a post Vagrant startup hint that will get you off on the right foot, otherwise you can also reference the build documentation below.
-
-## Flashing the Firmware
-
-The "easy" way to flash the firmware is using a tool from your host OS:
-
-* [QMK Toolbox](https://github.com/qmk/qmk_toolbox) (recommended)
-* [Teensy Loader](https://www.pjrc.com/teensy/loader.html)
-
-If you want to program via the command line you can uncomment the ['modifyvm'] lines in the Vagrantfile to enable the USB passthrough into Linux and then program using the command line tools like dfu-util/dfu-programmer or you can install the Teensy CLI version.
-
-## Vagrantfile Overview
-The development environment is configured to run the QMK Docker image, `qmkfm/qmk_cli`. This not only ensures predictability between systems, it also mirrors the CI environment.
-
-## FAQ
-
-### Why am I seeing issues under Virtualbox?
-Certain versions of Virtualbox 5 appear to have an incompatibility with the Virtualbox extensions installed in the boxes in this Vagrantfile. If you encounter any issues with the /vagrant mount not succeeding, please upgrade your version of Virtualbox to at least 5.0.12. **Alternately, you can try running the following command:**
-
-```
-vagrant plugin install vagrant-vbguest
-```
-
-### How do I remove an existing environment?
-Finished with your environment? From anywhere inside the folder where you checked out this project, Execute:
-
-```
-vagrant destroy
-```
-
-### What if I want to use Docker directly?
-Want to benefit from the Vagrant workflow without a virtual machine? The Vagrantfile is configured to bypass running a virtual machine, and run the container directly. Execute the following when bringing up the environment to force the use of Docker:
-```
-vagrant up --provider=docker
-```
-
-### How do I access the virtual machine instead of the Docker container?
-Execute the following to bypass the `vagrant` user booting directly to the official qmk builder image:
-
-```
-vagrant ssh -c 'sudo -i'
-```

docs/ja/_summary.md

@@ -38,7 +38,6 @@
     * [キーマップの概要](ja/keymap.md)
     * 開発環境
       * [Docker のガイド](ja/getting_started_docker.md)
-      * [Vagrant のガイド](ja/getting_started_vagrant.md)
     * 書き込み
       * [書き込み](ja/flashing.md)
       * [ATmega32A の書き込み (ps2avrgb)](ja/flashing_bootloadhid.md)

docs/ja/getting_started_vagrant.md

@@ -1,61 +0,0 @@
-# Vagrant クイックスタート
-
-<!---
-  original document: 0.12.43:docs/getting_started_vagrant.md
-  git diff 0.12.43 HEAD -- docs/getting_started_vagrant.md | cat
--->
-
-このプロジェクトは、プライマリオペレーティングシステムに大きな変更を加えることなくキーボードの新しいファームウェアを非常に簡単に構築することができる `Vagrantfile` を含みます。これは、あなたがプロジェクトをクローンしビルドを実行した時に、ビルドのために Vagrantfile を使っている他のユーザと全く同じ環境を持つことも保証します。これにより、人々はあなたが遭遇した問題の解決をより簡単に行えるようになります。
-
-## 必要事項
-
-このリポジトリ内の `Vagrantfile` を使うには、[Vagrant](https://www.vagrantup.com/) およびサポートされるプロバイダがインストールされている必要があります:
-
-* [VirtualBox](https://www.virtualbox.org/) (バージョン 5.0.12 以降)
-   * 「Vagrant を使うために最もアクセスしやすいプラットフォーム」とうたわれています。
-* [VMware Workstation](https://www.vmware.com/products/workstation) および [Vagrant VMware プラグイン](https://www.vagrantup.com/vmware)
-   * (有料) VMware プラグインには、ライセンスされた VMware Workstation/Fusion のコピーが必要です。
-* [Docker](https://www.docker.com/)
-
-Vagrant 以外に、適切なプロバイダがインストールされ、その後におそらくコンピュータを再起動すると、このプロジェクトをチェックアウトしたフォルダ内の任意の場所で 'vagrant up' を単純に実行することができ、このプロジェクトをビルドするのに必要な全てのツールが含まれる環境(仮想マシンあるいはコンテナ)が開始されます。Vagrant 起動時にうまく始めるためのヒントが表示されますが、それ以外に、以下のビルドドキュメントを参照することもできます。
-
-## ファームウェアの書き込み
-
-ファームウェアを書き込む「簡単な」方法は、ホスト OS からツールを使うことです:
-
-* [QMK Toolbox](https://github.com/qmk/qmk_toolbox) (推奨)
-* [Teensy ローダー](https://www.pjrc.com/teensy/loader.html)
-
-コマンドラインでプログラムしたい場合は、Vagranfile の ['modifyvm'] 行のコメントを解除して Linux への USB パススルーを有効にし、dfu-util/dfu-programmer のようなコマンドラインツールを使ってプログラムすることができます。あるいは Teensy CLI バージョンをインストールすることができます。
-
-## Vagrantfile の概要
-開発環境は QMK Docker イメージ、`qmkfm/qmk_cli` を実行するように設定されています。これはシステム間の予測可能性が保証されるだけでなく、CI 環境もミラーされます。
-
-## FAQ
-
-### Virtualbox で問題が発生するのはなぜですか？
-Virtualbox 5 の特定のバージョンはこの Vagrantfile のボックスにインストールされている Virtualbox の拡張機能と互換性が無いようです。/vagrant のマウントで問題が発生した場合は、Virtualbox のバージョンを少なくとも 5.0.12 にアップグレードしてください。**または、以下のコマンドを実行してみることができます:**
-
-```console
-vagrant plugin install vagrant-vbguest
-```
-
-### 既存の環境を削除するにはどうすればいいですか？
-あなたの環境での作業が完了しましたか？このプロジェクトをチェックアウトしたフォルダの中のどこからでも、以下を実行してください:
-
-```console
-vagrant destroy
-```
-
-### Docker を直接使いたい場合はどうしますか？
-仮想マシン無しで Vagrant のワークフローを活用したいですか？Vagrantfile は仮想マシンの実行をバイパスし、コンテナを直接実行するように設定されています。Docker を強制的に使うように環境を立ち上げる場合は、以下を実行してください:
-```console
-vagrant up --provider=docker
-```
-
-### Docker コンテナではなく仮想マシンにアクセスするにはどうすればいいですか？
-以下を実行して、公式の QMK ビルダーイメージから直接起動する `vagrant` ユーザをバイパスするようにします:
-
-```console
-vagrant ssh -c 'sudo -i'
-```

docs/squeezing_avr.md

@@ -194,6 +194,7 @@ That said, there are a number of Pro Micro replacements with ARM controllers:
 * [Blok](https://boardsource.xyz/store/628b95b494dfa308a6581622)
 * [Elite-Pi](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040)
 * [0xCB Helios](https://keeb.supply/products/0xcb-helios) ([Open Source](https://github.com/0xCB-dev/0xCB-Helios), DIY/PCBA/Shop)
+* [Liatris](https://splitkb.com/products/liatris)
 * [Michi](https://github.com/ci-bus/michi-promicro-rp2040)
 
 There are other, non-Pro Micro compatible boards out there. The most popular being:

docs/zh-cn/_summary.md

@@ -42,7 +42,6 @@
     * [键映射总览](zh-cn/keymap.md)
     * 开发环境
       * [Docker指南](zh-cn/getting_started_docker.md)
-      * [Vagrant指南](zh-cn/getting_started_vagrant.md)
     * 刷写(Flashing)
       * [刷写](zh-cn/flashing.md)
       * [刷写ATmega32A (ps2avrgb)](zh-cn/flashing_bootloadhid.md)
@@ -188,5 +187,5 @@
     * [Midi辅助功能](zh-cn/internals/midi_util.md)
     * [发送函数](zh-cn/internals/send_functions.md)
     * [Sysex工具](zh-cn/internals/sysex_tools.md)
-    
+
 <!--fromen:20211014-12:00(GMT+8) commit 04cf161aa01fd433b5dae69d9fd31569ed5dca59-->

docs/zh-cn/getting_started_vagrant.md

@@ -1,61 +0,0 @@
-# Vagrant快速上手指引
-
-<!---
-  original document: 0.15.12:docs/getting_started_vagrant.md
-  git diff 0.15.12 HEAD -- docs/getting_started_vagrant.md | cat
--->
-
-本工程包含一份 `Vagrantfile`，可以方便地在不更改你系统环境情况下完成新固件文件的构建工作。这同时也保证了在你拉取该工程代码后的编译环境与也使用Vagrantfile的其它人的一致。当你需要其他人协助你排查遇到的问题时会方便很多。
-
-## 需求
-
-本工程中的 `Vagrantfile` 需要安装[Vagrant](https://www.vagrantup.com/)以及可用的虚拟机服务：
-
-* [VirtualBox](https://www.virtualbox.org/) (5.0.12及以后版本)
-  * 卖点是'最适用于Vagrant的平台'
-* [VMware Workstation](https://www.vmware.com/products/workstation) 及 [Vagrant VMware插件](https://www.vagrantup.com/vmware)
-  * （付费购买的）VMware插件需要在经过正版授权的VMware Workstation/Fusion上运行
-* [Docker](https://www.docker.com/)
-
-安装了Vagrant之后，在安装合适的虚拟机服务后可能需要重启机器。拉取本工程后在工程目录下执行 'vagrant up' 将启动一个包含了所有本工程所需工具的构建环境（虚拟机或是容器）。最后会有一个vagrant启动提示告知你一切正常就绪，否则你也可以参考一下下面的构建文档。
-
-## 刷写固件
-
-比较“简单”的方案是在你的宿主系统上借助以下工具刷写固件：
-
-* [QMK工具箱](https://github.com/qmk/qmk_toolbox) (推荐)
-* [Teensy Loader](https://www.pjrc.com/teensy/loader.html)
-
-如果你希望通过命令行进行编程工作，可以在Vagrantfile中取消掉['modifyvm']的注释以允许USB直通到Linux环境，既可以使用dfu-util/dfu-programmer之类的命令行工具进行编程工作，或是安装Teensy的命令行版本。
-
-## Vagrantfile概览
-开发环境被配置为运行QMK Docker镜像 `qmkfm/qmk_cli`，不仅让各系统下的功能预期一致，也是我们CI环境的镜像。
-
-## FAQ
-
-### 为什么我的VirtualBox环境会有问题？
-VirtualBox 5的某些版本与工程中Vagrantfile中指定的VirtualBox扩展存在兼容问题。如果你遇到了/vagrant挂载不成功的问题，请升级VirtualBox至5.0.12或更高版本。**或者，可以尝试执行如下命令：**
-
-```console
-vagrant plugin install vagrant-vbguest
-```
-
-### 如何移除一个现有环境？
-不再需要这个环境了是吗？在本工程目录下的任何位置，执行：
-
-```console
-vagrant destroy
-```
-
-### 如果我是想直接用Docker呢？
-想在不使用虚拟机技术的情况下也能使用Vagrant工作流？Vagrangfile已配置为允许绕过运行虚拟机，直接运行容器。通过如下方式执行命令可以强制使用Docker来启动环境：
-```console
-vagrant up --provider=docker
-```
-
-### 如何访问虚拟机环境而非Docker容器？
-通过如下方法跳过 `vagrant` 的用户初始化过程以在QMK构建镜像中直接执行：
-
-```console
-vagrant ssh -c 'sudo -i'
-```

drivers/led/aw20216.c

@@ -1,4 +1,5 @@
 /* Copyright 2021 Jasper Chan
+ *           2023 Huckies <https://github.com/Huckies>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,6 +16,7 @@
  */
 
 #include "aw20216.h"
+#include "wait.h"
 #include "spi_master.h"
 
 /* The AW20216 appears to be somewhat similar to the IS31FL743, although quite
@@ -34,6 +36,8 @@
 
 #define AW_REG_CONFIGURATION 0x00 // PG0
 #define AW_REG_GLOBALCURRENT 0x01 // PG0
+#define AW_REG_RESET 0x2F         // PG0
+#define AW_REG_MIXFUNCTION 0x46   // PG0
 
 // Default value of AW_REG_CONFIGURATION
 // D7:D4 = 1011, SWSEL (SW1~SW12 active)
@@ -41,7 +45,10 @@
 // D2:D1 = 00, OSDE (open/short detection enable)
 // D0 = 0, CHIPEN (write 1 to enable LEDs when hardware enable pulled high)
 #define AW_CONFIG_DEFAULT 0b10110000
+#define AW_MIXCR_DEFAULT 0b00000000
+#define AW_RESET_CMD 0xAE
 #define AW_CHIPEN 1
+#define AW_LPEN (0x01 << 1)
 
 #define AW_PWM_REGISTER_COUNT 216
 
@@ -94,6 +101,10 @@ static inline bool AW20216_write_register(pin_t cs_pin, uint8_t page, uint8_t re
     return AW20216_write(cs_pin, page, reg, &value, 1);
 }
 
+void AW20216_soft_reset(pin_t cs_pin) {
+    AW20216_write_register(cs_pin, AW_PAGE_FUNCTION, AW_REG_RESET, AW_RESET_CMD);
+}
+
 static void AW20216_init_scaling(pin_t cs_pin) {
     // Set constant current to the max, control brightness with PWM
     for (uint8_t i = 0; i < AW_PWM_REGISTER_COUNT; i++) {
@@ -111,15 +122,23 @@ static inline void AW20216_soft_enable(pin_t cs_pin) {
     AW20216_write_register(cs_pin, AW_PAGE_FUNCTION, AW_REG_CONFIGURATION, AW_CONFIG_DEFAULT | AW_CHIPEN);
 }
 
+static inline void AW20216_auto_lowpower(pin_t cs_pin) {
+    AW20216_write_register(cs_pin, AW_PAGE_FUNCTION, AW_REG_MIXFUNCTION, AW_MIXCR_DEFAULT | AW_LPEN);
+}
+
 void AW20216_init(pin_t cs_pin, pin_t en_pin) {
     setPinOutput(en_pin);
     writePinHigh(en_pin);
 
+    AW20216_soft_reset(cs_pin);
+    wait_ms(2);
+
     // Drivers should start with all scaling and PWM registers as off
     AW20216_init_current_limit(cs_pin);
     AW20216_init_scaling(cs_pin);
 
     AW20216_soft_enable(cs_pin);
+    AW20216_auto_lowpower(cs_pin);
 }
 
 void AW20216_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {

keyboards/0_sixty/config.h

@@ -16,13 +16,6 @@
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS { B1, F7, F6, F5, F4 }
-#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B3, B2 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/0_sixty/info.json

@@ -6,6 +6,11 @@
         "vid": "0x7654",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5", "B3", "B2"],
+        "rows": ["B1", "F7", "F6", "F5", "F4"]
+    },
+    "diode_direction": "COL2ROW",
     "features": {
         "extrakey": true,
         "console": true,

keyboards/0xc7/61key/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, F7, F6, F5, F4, F1, F0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/0xc7/61key/info.json

@@ -8,6 +8,11 @@
         "pid": "0x6161",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "F7", "F6", "F5", "F4", "F1", "F0"],
+        "rows": ["B0", "B1", "B2", "B3", "B7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layout_aliases": {

keyboards/0xcb/static/config.h

@@ -16,26 +16,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-// clang-format off
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D5, D6, D7, B0, B1, B2, B3, B4 }
-#define MATRIX_COL_PINS { B5, D4, C0, C1, C2, C3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define TAP_CODE_DELAY 10
-// clang-format on
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/0xcb/static/info.json

@@ -8,6 +8,11 @@
     "pid": "0xA455",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["B5", "D4", "C0", "C1", "C2", "C3"],
+    "rows": ["D5", "D6", "D7", "B0", "B1", "B2", "B3", "B4"]
+  },
+  "diode_direction": "COL2ROW",
   "encoder": {
     "rotary": [
       {"pin_a": "D0", "pin_b": "D1"}

keyboards/10bleoledhub/config.h

@@ -16,12 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.*/
 
 #pragma once
 
-
-#define MATRIX_ROW_PINS { F0, F5, F4, F6 }
-#define MATRIX_COL_PINS { D6, D7, B5 }
-
-#define DIODE_DIRECTION ROW2COL
-
 #define SSD1306OLED
 #define RGB_DI_PIN B7
 

keyboards/10bleoledhub/info.json

@@ -8,6 +8,11 @@
         "pid": "0x7C99",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D6", "D7", "B5"],
+        "rows": ["F0", "F5", "F4", "F6"]
+    },
+    "diode_direction": "ROW2COL",
     "encoder": {
         "rotary": [
             {"pin_a": "C7", "pin_b": "F7"}

keyboards/1upkeyboards/1up60hse/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B3, B2, B1, B0, D4 }
-#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, E6, D1, D0, D2, D3, D5, D6, D7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN F0
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/1upkeyboards/1up60hse/info.json

@@ -8,6 +8,11 @@
         "pid": "0x6873",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C7", "F7", "F6", "F5", "F4", "F1", "E6", "D1", "D0", "D2", "D3", "D5", "D6", "D7"],
+        "rows": ["B3", "B2", "B1", "B0", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7",
         "levels": 5,

keyboards/1upkeyboards/1up60hte/config.h

@@ -18,14 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B3, B2, B1, B0, D4 }
-#define MATRIX_COL_PINS { F6, F5, F4, F1, E6, D0, D1, D2, D3, D5, D6, D7, B4, B5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/1upkeyboards/1up60hte/info.json

@@ -8,6 +8,11 @@
         "pid": "0x6874",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F6", "F5", "F4", "F1", "E6", "D0", "D1", "D2", "D3", "D5", "D6", "D7", "B4", "B5"],
+        "rows": ["B3", "B2", "B1", "B0", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B7"
     },

keyboards/1upkeyboards/1up60rgb/config.h

@@ -1,13 +1,5 @@
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/1upkeyboards/1up60rgb/info.json

@@ -8,6 +8,11 @@
     "pid": "0x7267",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["F0", "F1", "E6", "C7", "C6", "B7", "D4", "B1", "B0", "B5", "B4", "D7", "D6", "B3", "F4"],
+    "rows": ["D0", "D1", "D2", "D3", "D5"]
+  },
+  "diode_direction": "COL2ROW",
   "backlight": {
     "pin": "B6",
     "levels": 5

keyboards/1upkeyboards/pi40/config.h

@@ -15,11 +15,6 @@
 #define OLED_FONT_H "keyboards/1upkeyboards/pi40/lib/glcdfont.c"
 #endif
 
-#define DIODE_DIRECTION COL2ROW
-
-#define MATRIX_ROW_PINS { GP21, GP20, GP19, GP18 }
-#define MATRIX_COL_PINS { GP1, GP2, GP3, GP4, GP5, GP6, GP7, GP8, GP9, GP10, GP11, GP12 }
-
 #define RGB_DI_PIN GP0
 #define RGB_MATRIX_LED_COUNT 47
 #define RGBLED_NUM 47

keyboards/1upkeyboards/pi40/info.json

@@ -6,6 +6,11 @@
         "pid": "0x5600",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["GP1", "GP2", "GP3", "GP4", "GP5", "GP6", "GP7", "GP8", "GP9", "GP10", "GP11", "GP12"],
+        "rows": ["GP21", "GP20", "GP19", "GP18"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "GP14", "pin_b": "GP13"}

keyboards/1upkeyboards/pi60/info.json

@@ -74,74 +74,74 @@
     "layouts": {
         "LAYOUT_60_ansi": {
             "layout": [
-                { "label": "Esc",    "matrix": [0, 0], "w": 1, "x": 0, "y": 0 },
-                { "label": "1",      "matrix": [0, 1], "w": 1, "x": 1, "y": 0 },
-                { "label": "2",      "matrix": [0, 2], "w": 1, "x": 2, "y": 0 },
-                { "label": "3",      "matrix": [0, 3], "w": 1, "x": 3, "y": 0 },
-                { "label": "4",      "matrix": [0, 4], "w": 1, "x": 4, "y": 0 },
-                { "label": "5",      "matrix": [0, 5], "w": 1, "x": 5, "y": 0 },
-                { "label": "6",      "matrix": [0, 6], "w": 1, "x": 6, "y": 0 },
-                { "label": "7",      "matrix": [0, 7], "w": 1, "x": 7, "y": 0 },
-                { "label": "8",      "matrix": [0, 8], "w": 1, "x": 8, "y": 0 },
-                { "label": "9",      "matrix": [0, 9], "w": 1, "x": 9, "y": 0 },
-                { "label": "0",      "matrix": [0, 10], "w": 1, "x": 10, "y": 0 },
-                { "label": "-",      "matrix": [0, 11], "w": 1, "x": 11, "y": 0 },
-                { "label": "=",      "matrix": [0, 12], "w": 1, "x": 12, "y": 0 },
-                { "label": "BS",     "matrix": [0, 13], "w": 1, "x": 13, "y": 0 },
-                { "label": "~",      "matrix": [0, 14], "w": 1, "x": 14, "y": 0 },
+                { "label": "Esc",    "matrix": [0, 0], "x": 0, "y": 0 },
+                { "label": "1",      "matrix": [0, 1], "x": 1, "y": 0 },
+                { "label": "2",      "matrix": [0, 2], "x": 2, "y": 0 },
+                { "label": "3",      "matrix": [0, 3], "x": 3, "y": 0 },
+                { "label": "4",      "matrix": [0, 4], "x": 4, "y": 0 },
+                { "label": "5",      "matrix": [0, 5], "x": 5, "y": 0 },
+                { "label": "6",      "matrix": [0, 6], "x": 6, "y": 0 },
+                { "label": "7",      "matrix": [0, 7], "x": 7, "y": 0 },
+                { "label": "8",      "matrix": [0, 8], "x": 8, "y": 0 },
+                { "label": "9",      "matrix": [0, 9], "x": 9, "y": 0 },
+                { "label": "0",      "matrix": [0, 10], "x": 10, "y": 0 },
+                { "label": "-",      "matrix": [0, 11], "x": 11, "y": 0 },
+                { "label": "=",      "matrix": [0, 12], "x": 12, "y": 0 },
+                { "label": "BS",     "matrix": [0, 13], "x": 13, "y": 0 },
+                { "label": "~",      "matrix": [0, 14], "x": 14, "y": 0 },
                 { "label": "Tab",    "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 },
-                { "label": "Q",      "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 },
-                { "label": "W",      "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 },
-                { "label": "E",      "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 },
-                { "label": "R",      "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 },
-                { "label": "T",      "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 },
-                { "label": "Y",      "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 },
-                { "label": "U",      "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 },
-                { "label": "I",      "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 },
-                { "label": "O",      "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 },
-                { "label": "P",      "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 },
-                { "label": "[",      "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 },
-                { "label": "]",      "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 },
+                { "label": "Q",      "matrix": [1, 1], "x": 1.5, "y": 1 },
+                { "label": "W",      "matrix": [1, 2], "x": 2.5, "y": 1 },
+                { "label": "E",      "matrix": [1, 3], "x": 3.5, "y": 1 },
+                { "label": "R",      "matrix": [1, 4], "x": 4.5, "y": 1 },
+                { "label": "T",      "matrix": [1, 5], "x": 5.5, "y": 1 },
+                { "label": "Y",      "matrix": [1, 6], "x": 6.5, "y": 1 },
+                { "label": "U",      "matrix": [1, 7], "x": 7.5, "y": 1 },
+                { "label": "I",      "matrix": [1, 8], "x": 8.5, "y": 1 },
+                { "label": "O",      "matrix": [1, 9], "x": 9.5, "y": 1 },
+                { "label": "P",      "matrix": [1, 10], "x": 10.5, "y": 1 },
+                { "label": "[",      "matrix": [1, 11], "x": 11.5, "y": 1 },
+                { "label": "]",      "matrix": [1, 12], "x": 12.5, "y": 1 },
                 { "label": "|",      "matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1 },
                 { "label": "Caps",   "matrix": [2, 15], "w": 1.75, "x": 0, "y": 2 },
-                { "label": "A",      "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 },
-                { "label": "S",      "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 },
-                { "label": "D",      "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 },
-                { "label": "F",      "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 },
-                { "label": "G",      "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 },
-                { "label": "H",      "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 },
-                { "label": "J",      "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 },
-                { "label": "K",      "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 },
-                { "label": "L",      "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 },
-                { "label": ";",      "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 },
-                { "label": "'",      "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 },
-                { "label": "ISO'",   "matrix": [2, 12], "w": 1, "x": 12.75, "y": 2 },
+                { "label": "A",      "matrix": [2, 1], "x": 1.75, "y": 2 },
+                { "label": "S",      "matrix": [2, 2], "x": 2.75, "y": 2 },
+                { "label": "D",      "matrix": [2, 3], "x": 3.75, "y": 2 },
+                { "label": "F",      "matrix": [2, 4], "x": 4.75, "y": 2 },
+                { "label": "G",      "matrix": [2, 5], "x": 5.75, "y": 2 },
+                { "label": "H",      "matrix": [2, 6], "x": 6.75, "y": 2 },
+                { "label": "J",      "matrix": [2, 7], "x": 7.75, "y": 2 },
+                { "label": "K",      "matrix": [2, 8], "x": 8.75, "y": 2 },
+                { "label": "L",      "matrix": [2, 9], "x": 9.75, "y": 2 },
+                { "label": ";",      "matrix": [2, 10], "x": 10.75, "y": 2 },
+                { "label": "'",      "matrix": [2, 11], "x": 11.75, "y": 2 },
+                { "label": "ISO'",   "matrix": [2, 12], "x": 12.75, "y": 2 },
                 { "label": "Enter",  "matrix": [2, 13], "w": 1.25, "x": 13.75, "y": 2 },
                 { "label": "LShift", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 },
-                { "label": "ISO<>",  "matrix": [3, 1], "w": 1, "x": 1.25, "y": 3 },
-                { "label": "Z",      "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 },
-                { "label": "X",      "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 },
-                { "label": "C",      "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 },
-                { "label": "V",      "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 },
-                { "label": "B",      "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 },
-                { "label": "N",      "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 },
-                { "label": "M",      "matrix": [3, 8], "w": 1, "x": 8.25, "y": 3 },
-                { "label": ",",      "matrix": [3, 9], "w": 1, "x": 9.25, "y": 3 },
-                { "label": ".",      "matrix": [3, 10], "w": 1, "x": 10.25, "y": 3 },
+                { "label": "ISO<>",  "matrix": [3, 1], "x": 1.25, "y": 3 },
+                { "label": "Z",      "matrix": [3, 2], "x": 2.25, "y": 3 },
+                { "label": "X",      "matrix": [3, 3], "x": 3.25, "y": 3 },
+                { "label": "C",      "matrix": [3, 4], "x": 4.25, "y": 3 },
+                { "label": "V",      "matrix": [3, 5], "x": 5.25, "y": 3 },
+                { "label": "B",      "matrix": [3, 6], "x": 6.25, "y": 3 },
+                { "label": "N",      "matrix": [3, 7], "x": 7.25, "y": 3 },
+                { "label": "M",      "matrix": [3, 8], "x": 8.25, "y": 3 },
+                { "label": ",",      "matrix": [3, 9], "x": 9.25, "y": 3 },
+                { "label": ".",      "matrix": [3, 10], "x": 10.25, "y": 3 },
                 { "label": "/",      "matrix": [3, 11], "w": 1.75, "x": 11.25, "y": 3 },
-                { "label": "RShift", "matrix": [3, 12], "w": 1, "x": 13, "y": 3 },
-                { "label": "FN",     "matrix": [3, 14], "w": 1, "x": 14, "y": 3 },
+                { "label": "RShift", "matrix": [3, 12], "x": 13, "y": 3 },
+                { "label": "FN",     "matrix": [3, 14], "x": 14, "y": 3 },
                 { "label": "LCtrl",  "matrix": [4, 15], "w": 1.25, "x": 0, "y": 4 },
                 { "label": "LGui",   "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 },
                 { "label": "LAlt",   "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 },
                 { "label": "LSpace", "matrix": [4, 4], "w": 2.75, "x": 3.75, "y": 4 },
                 { "label": "CSpace", "matrix": [4, 6], "w": 1.25, "x": 6.5, "y": 4 },
                 { "label": "RSpace", "matrix": [4, 8], "w": 2.25, "x": 7.75, "y": 4 },
-                { "label": "RAlt",   "matrix": [4, 10], "w": 1, "x": 10, "y": 4 },
-                { "label": "FN",     "matrix": [4, 11], "w": 1, "x": 11, "y": 4 },
-                { "label": "Mid1U",  "matrix": [4, 12], "w": 1, "x": 12, "y": 4 },
-                { "label": "Menu",   "matrix": [4, 13], "w": 1, "x": 13, "y": 4 },
-                { "label": "RCtrl",  "matrix": [4, 14], "w": 1, "x": 14, "y": 4 }
+                { "label": "RAlt",   "matrix": [4, 10], "x": 10, "y": 4 },
+                { "label": "FN",     "matrix": [4, 11], "x": 11, "y": 4 },
+                { "label": "Mid1U",  "matrix": [4, 12], "x": 12, "y": 4 },
+                { "label": "Menu",   "matrix": [4, 13], "x": 13, "y": 4 },
+                { "label": "RCtrl",  "matrix": [4, 14], "x": 14, "y": 4 }
             ]
         }
     }

keyboards/1upkeyboards/pi60_hse/info.json

@@ -54,61 +54,61 @@
     "layouts": {
         "LAYOUT_60_ansi_split_bs_rshift": {
             "layout": [
-                { "label": "Esc",    "matrix": [0, 0], "w": 1, "x": 0, "y": 0 },
-                { "label": "1",      "matrix": [0, 1], "w": 1, "x": 1, "y": 0 },
-                { "label": "2",      "matrix": [0, 2], "w": 1, "x": 2, "y": 0 },
-                { "label": "3",      "matrix": [0, 3], "w": 1, "x": 3, "y": 0 },
-                { "label": "4",      "matrix": [0, 4], "w": 1, "x": 4, "y": 0 },
-                { "label": "5",      "matrix": [0, 5], "w": 1, "x": 5, "y": 0 },
-                { "label": "6",      "matrix": [0, 6], "w": 1, "x": 6, "y": 0 },
-                { "label": "7",      "matrix": [0, 7], "w": 1, "x": 7, "y": 0 },
-                { "label": "8",      "matrix": [0, 8], "w": 1, "x": 8, "y": 0 },
-                { "label": "9",      "matrix": [0, 9], "w": 1, "x": 9, "y": 0 },
-                { "label": "0",      "matrix": [0, 10], "w": 1, "x": 10, "y": 0 },
-                { "label": "-",      "matrix": [0, 11], "w": 1, "x": 11, "y": 0 },
-                { "label": "=",      "matrix": [0, 12], "w": 1, "x": 12, "y": 0 },
-                { "label": "BS",     "matrix": [0, 13], "w": 1, "x": 13, "y": 0 },
-                { "label": "~",      "matrix": [1, 13], "w": 1, "x": 14, "y": 0 },
+                { "label": "Esc",    "matrix": [0, 0], "x": 0, "y": 0 },
+                { "label": "1",      "matrix": [0, 1], "x": 1, "y": 0 },
+                { "label": "2",      "matrix": [0, 2], "x": 2, "y": 0 },
+                { "label": "3",      "matrix": [0, 3], "x": 3, "y": 0 },
+                { "label": "4",      "matrix": [0, 4], "x": 4, "y": 0 },
+                { "label": "5",      "matrix": [0, 5], "x": 5, "y": 0 },
+                { "label": "6",      "matrix": [0, 6], "x": 6, "y": 0 },
+                { "label": "7",      "matrix": [0, 7], "x": 7, "y": 0 },
+                { "label": "8",      "matrix": [0, 8], "x": 8, "y": 0 },
+                { "label": "9",      "matrix": [0, 9], "x": 9, "y": 0 },
+                { "label": "0",      "matrix": [0, 10], "x": 10, "y": 0 },
+                { "label": "-",      "matrix": [0, 11], "x": 11, "y": 0 },
+                { "label": "=",      "matrix": [0, 12], "x": 12, "y": 0 },
+                { "label": "BS",     "matrix": [0, 13], "x": 13, "y": 0 },
+                { "label": "~",      "matrix": [1, 13], "x": 14, "y": 0 },
                 { "label": "Tab",    "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 },
-                { "label": "Q",      "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 },
-                { "label": "W",      "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 },
-                { "label": "E",      "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 },
-                { "label": "R",      "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 },
-                { "label": "T",      "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 },
-                { "label": "Y",      "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 },
-                { "label": "U",      "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 },
-                { "label": "I",      "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 },
-                { "label": "O",      "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 },
-                { "label": "P",      "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 },
-                { "label": "[",      "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 },
-                { "label": "]",      "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 },
+                { "label": "Q",      "matrix": [1, 1], "x": 1.5, "y": 1 },
+                { "label": "W",      "matrix": [1, 2], "x": 2.5, "y": 1 },
+                { "label": "E",      "matrix": [1, 3], "x": 3.5, "y": 1 },
+                { "label": "R",      "matrix": [1, 4], "x": 4.5, "y": 1 },
+                { "label": "T",      "matrix": [1, 5], "x": 5.5, "y": 1 },
+                { "label": "Y",      "matrix": [1, 6], "x": 6.5, "y": 1 },
+                { "label": "U",      "matrix": [1, 7], "x": 7.5, "y": 1 },
+                { "label": "I",      "matrix": [1, 8], "x": 8.5, "y": 1 },
+                { "label": "O",      "matrix": [1, 9], "x": 9.5, "y": 1 },
+                { "label": "P",      "matrix": [1, 10], "x": 10.5, "y": 1 },
+                { "label": "[",      "matrix": [1, 11], "x": 11.5, "y": 1 },
+                { "label": "]",      "matrix": [1, 12], "x": 12.5, "y": 1 },
                 { "label": "|",      "matrix": [2, 12], "w": 1.5, "x": 13.5, "y": 1 },
                 { "label": "Caps",   "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 },
-                { "label": "A",      "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 },
-                { "label": "S",      "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 },
-                { "label": "D",      "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 },
-                { "label": "F",      "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 },
-                { "label": "G",      "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 },
-                { "label": "H",      "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 },
-                { "label": "J",      "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 },
-                { "label": "K",      "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 },
-                { "label": "L",      "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 },
-                { "label": ";",      "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 },
-                { "label": "'",      "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 },
+                { "label": "A",      "matrix": [2, 1], "x": 1.75, "y": 2 },
+                { "label": "S",      "matrix": [2, 2], "x": 2.75, "y": 2 },
+                { "label": "D",      "matrix": [2, 3], "x": 3.75, "y": 2 },
+                { "label": "F",      "matrix": [2, 4], "x": 4.75, "y": 2 },
+                { "label": "G",      "matrix": [2, 5], "x": 5.75, "y": 2 },
+                { "label": "H",      "matrix": [2, 6], "x": 6.75, "y": 2 },
+                { "label": "J",      "matrix": [2, 7], "x": 7.75, "y": 2 },
+                { "label": "K",      "matrix": [2, 8], "x": 8.75, "y": 2 },
+                { "label": "L",      "matrix": [2, 9], "x": 9.75, "y": 2 },
+                { "label": ";",      "matrix": [2, 10], "x": 10.75, "y": 2 },
+                { "label": "'",      "matrix": [2, 11], "x": 11.75, "y": 2 },
                 { "label": "Enter",  "matrix": [2, 13], "w": 2.25, "x": 12.75, "y": 2 },
                 { "label": "LShift", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 },
-                { "label": "Z",      "matrix": [3, 1], "w": 1, "x": 2.25, "y": 3 },
-                { "label": "X",      "matrix": [3, 2], "w": 1, "x": 3.25, "y": 3 },
-                { "label": "C",      "matrix": [3, 3], "w": 1, "x": 4.25, "y": 3 },
-                { "label": "V",      "matrix": [3, 4], "w": 1, "x": 5.25, "y": 3 },
-                { "label": "B",      "matrix": [3, 5], "w": 1, "x": 6.25, "y": 3 },
-                { "label": "N",      "matrix": [3, 6], "w": 1, "x": 7.25, "y": 3 },
-                { "label": "M",      "matrix": [3, 7], "w": 1, "x": 8.25, "y": 3 },
-                { "label": ",",      "matrix": [3, 8], "w": 1, "x": 9.25, "y": 3 },
-                { "label": ".",      "matrix": [3, 9], "w": 1, "x": 10.25, "y": 3 },
-                { "label": "/",      "matrix": [3, 10], "w": 1, "x": 11.25, "y": 3 },
+                { "label": "Z",      "matrix": [3, 1], "x": 2.25, "y": 3 },
+                { "label": "X",      "matrix": [3, 2], "x": 3.25, "y": 3 },
+                { "label": "C",      "matrix": [3, 3], "x": 4.25, "y": 3 },
+                { "label": "V",      "matrix": [3, 4], "x": 5.25, "y": 3 },
+                { "label": "B",      "matrix": [3, 5], "x": 6.25, "y": 3 },
+                { "label": "N",      "matrix": [3, 6], "x": 7.25, "y": 3 },
+                { "label": "M",      "matrix": [3, 7], "x": 8.25, "y": 3 },
+                { "label": ",",      "matrix": [3, 8], "x": 9.25, "y": 3 },
+                { "label": ".",      "matrix": [3, 9], "x": 10.25, "y": 3 },
+                { "label": "/",      "matrix": [3, 10], "x": 11.25, "y": 3 },
                 { "label": "RShift", "matrix": [3, 12], "w": 1.75, "x": 12.25, "y": 3 },
-                { "label": "FN",     "matrix": [3, 13], "w": 1, "x": 14, "y": 3 },
+                { "label": "FN",     "matrix": [3, 13], "x": 14, "y": 3 },
                 { "label": "LCtrl",  "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 },
                 { "label": "LGui",   "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 },
                 { "label": "LAlt",   "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 },

keyboards/1upkeyboards/pi60_rgb/info.json

@@ -102,58 +102,58 @@
     "layouts": {
         "LAYOUT_60_ansi": {
             "layout": [
-                { "label": "Esc",    "matrix": [0, 0], "w": 1, "x": 0, "y": 0 },
-                { "label": "1",      "matrix": [0, 1], "w": 1, "x": 1, "y": 0 },
-                { "label": "2",      "matrix": [0, 2], "w": 1, "x": 2, "y": 0 },
-                { "label": "3",      "matrix": [0, 3], "w": 1, "x": 3, "y": 0 },
-                { "label": "4",      "matrix": [0, 4], "w": 1, "x": 4, "y": 0 },
-                { "label": "5",      "matrix": [0, 5], "w": 1, "x": 5, "y": 0 },
-                { "label": "6",      "matrix": [0, 6], "w": 1, "x": 6, "y": 0 },
-                { "label": "7",      "matrix": [0, 7], "w": 1, "x": 7, "y": 0 },
-                { "label": "8",      "matrix": [0, 8], "w": 1, "x": 8, "y": 0 },
-                { "label": "9",      "matrix": [0, 9], "w": 1, "x": 9, "y": 0 },
-                { "label": "0",      "matrix": [0, 10], "w": 1, "x": 10, "y": 0 },
-                { "label": "-",      "matrix": [0, 11], "w": 1, "x": 11, "y": 0 },
-                { "label": "=",      "matrix": [0, 12], "w": 1, "x": 12, "y": 0 },
+                { "label": "Esc",    "matrix": [0, 0], "x": 0, "y": 0 },
+                { "label": "1",      "matrix": [0, 1], "x": 1, "y": 0 },
+                { "label": "2",      "matrix": [0, 2], "x": 2, "y": 0 },
+                { "label": "3",      "matrix": [0, 3], "x": 3, "y": 0 },
+                { "label": "4",      "matrix": [0, 4], "x": 4, "y": 0 },
+                { "label": "5",      "matrix": [0, 5], "x": 5, "y": 0 },
+                { "label": "6",      "matrix": [0, 6], "x": 6, "y": 0 },
+                { "label": "7",      "matrix": [0, 7], "x": 7, "y": 0 },
+                { "label": "8",      "matrix": [0, 8], "x": 8, "y": 0 },
+                { "label": "9",      "matrix": [0, 9], "x": 9, "y": 0 },
+                { "label": "0",      "matrix": [0, 10], "x": 10, "y": 0 },
+                { "label": "-",      "matrix": [0, 11], "x": 11, "y": 0 },
+                { "label": "=",      "matrix": [0, 12], "x": 12, "y": 0 },
                 { "label": "BS",     "matrix": [0, 13], "w": 2, "x": 13, "y": 0 },
                 { "label": "Tab",    "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 },
-                { "label": "Q",      "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 },
-                { "label": "W",      "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 },
-                { "label": "E",      "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 },
-                { "label": "R",      "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 },
-                { "label": "T",      "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 },
-                { "label": "Y",      "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 },
-                { "label": "U",      "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 },
-                { "label": "I",      "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 },
-                { "label": "O",      "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 },
-                { "label": "P",      "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 },
-                { "label": "[",      "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 },
-                { "label": "]",      "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 },
+                { "label": "Q",      "matrix": [1, 1], "x": 1.5, "y": 1 },
+                { "label": "W",      "matrix": [1, 2], "x": 2.5, "y": 1 },
+                { "label": "E",      "matrix": [1, 3], "x": 3.5, "y": 1 },
+                { "label": "R",      "matrix": [1, 4], "x": 4.5, "y": 1 },
+                { "label": "T",      "matrix": [1, 5], "x": 5.5, "y": 1 },
+                { "label": "Y",      "matrix": [1, 6], "x": 6.5, "y": 1 },
+                { "label": "U",      "matrix": [1, 7], "x": 7.5, "y": 1 },
+                { "label": "I",      "matrix": [1, 8], "x": 8.5, "y": 1 },
+                { "label": "O",      "matrix": [1, 9], "x": 9.5, "y": 1 },
+                { "label": "P",      "matrix": [1, 10], "x": 10.5, "y": 1 },
+                { "label": "[",      "matrix": [1, 11], "x": 11.5, "y": 1 },
+                { "label": "]",      "matrix": [1, 12], "x": 12.5, "y": 1 },
                 { "label": "|",      "matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1 },
                 { "label": "Caps",   "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 },
-                { "label": "A",      "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 },
-                { "label": "S",      "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 },
-                { "label": "D",      "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 },
-                { "label": "F",      "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 },
-                { "label": "G",      "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 },
-                { "label": "H",      "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 },
-                { "label": "J",      "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 },
-                { "label": "K",      "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 },
-                { "label": "L",      "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 },
-                { "label": ";",      "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 },
-                { "label": "'",      "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 },
+                { "label": "A",      "matrix": [2, 1], "x": 1.75, "y": 2 },
+                { "label": "S",      "matrix": [2, 2], "x": 2.75, "y": 2 },
+                { "label": "D",      "matrix": [2, 3], "x": 3.75, "y": 2 },
+                { "label": "F",      "matrix": [2, 4], "x": 4.75, "y": 2 },
+                { "label": "G",      "matrix": [2, 5], "x": 5.75, "y": 2 },
+                { "label": "H",      "matrix": [2, 6], "x": 6.75, "y": 2 },
+                { "label": "J",      "matrix": [2, 7], "x": 7.75, "y": 2 },
+                { "label": "K",      "matrix": [2, 8], "x": 8.75, "y": 2 },
+                { "label": "L",      "matrix": [2, 9], "x": 9.75, "y": 2 },
+                { "label": ";",      "matrix": [2, 10], "x": 10.75, "y": 2 },
+                { "label": "'",      "matrix": [2, 11], "x": 11.75, "y": 2 },
                 { "label": "Enter",  "matrix": [2, 13], "w": 2.25, "x": 12.75, "y": 2 },
                 { "label": "LShift", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 },
-                { "label": "Z",      "matrix": [3, 1], "w": 1, "x": 2.25, "y": 3 },
-                { "label": "X",      "matrix": [3, 2], "w": 1, "x": 3.25, "y": 3 },
-                { "label": "C",      "matrix": [3, 3], "w": 1, "x": 4.25, "y": 3 },
-                { "label": "V",      "matrix": [3, 4], "w": 1, "x": 5.25, "y": 3 },
-                { "label": "B",      "matrix": [3, 5], "w": 1, "x": 6.25, "y": 3 },
-                { "label": "N",      "matrix": [3, 6], "w": 1, "x": 7.25, "y": 3 },
-                { "label": "M",      "matrix": [3, 7], "w": 1, "x": 8.25, "y": 3 },
-                { "label": ",",      "matrix": [3, 8], "w": 1, "x": 9.25, "y": 3 },
-                { "label": ".",      "matrix": [3, 9], "w": 1, "x": 10.25, "y": 3 },
-                { "label": "/",      "matrix": [3, 10], "w": 1, "x": 11.25, "y": 3 },
+                { "label": "Z",      "matrix": [3, 1], "x": 2.25, "y": 3 },
+                { "label": "X",      "matrix": [3, 2], "x": 3.25, "y": 3 },
+                { "label": "C",      "matrix": [3, 3], "x": 4.25, "y": 3 },
+                { "label": "V",      "matrix": [3, 4], "x": 5.25, "y": 3 },
+                { "label": "B",      "matrix": [3, 5], "x": 6.25, "y": 3 },
+                { "label": "N",      "matrix": [3, 6], "x": 7.25, "y": 3 },
+                { "label": "M",      "matrix": [3, 7], "x": 8.25, "y": 3 },
+                { "label": ",",      "matrix": [3, 8], "x": 9.25, "y": 3 },
+                { "label": ".",      "matrix": [3, 9], "x": 10.25, "y": 3 },
+                { "label": "/",      "matrix": [3, 10], "x": 11.25, "y": 3 },
                 { "label": "RShift", "matrix": [3, 13], "w": 2.75, "x": 12.25, "y": 3 },
                 { "label": "LCtrl",  "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 },
                 { "label": "LGui",   "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 },

keyboards/1upkeyboards/super16/config.h

@@ -17,25 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
-    { D1, D0, F4, F5 }
-#define MATRIX_COL_PINS \
-    { D4, C6, F6, F7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 16  // Add 12 if attaching the RGB LED ring

keyboards/1upkeyboards/super16/info.json

@@ -8,6 +8,11 @@
     "pid": "0x5516",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["D4", "C6", "F6", "F7"],
+    "rows": ["D1", "D0", "F4", "F5"]
+  },
+  "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "caterina",
   "community_layouts": ["ortho_4x4", "numpad_4x4"],

keyboards/1upkeyboards/super16v2/config.h

@@ -19,24 +19,6 @@
 
 #define MOUSEKEY_MOVE_DELTA 25
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-//                         0   1   2   3
-#define MATRIX_ROW_PINS { D1, D2, D3, D4 }
-#define MATRIX_COL_PINS { D5, D6, C2, D0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN B5
 #define RGB_MATRIX_LED_COUNT 20
 #ifdef RGB_DI_PIN

keyboards/1upkeyboards/super16v2/info.json

@@ -8,6 +8,11 @@
       "pid": "0x5517",
       "device_version": "0.0.1"
     },
+    "matrix_pins": {
+      "cols": ["D5", "D6", "C2", "D0"],
+      "rows": ["D1", "D2", "D3", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
       "rotary": [
         {"pin_a": "B1", "pin_b": "B2"},

keyboards/1upkeyboards/sweet16/v1/config.h

@@ -1,13 +1,5 @@
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { D1, D0, D4, C6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #ifndef CONVERT_TO_PROTON_C
 #    define LED_NUM_LOCK_PIN B0 // RXLED
 #    define LED_CAPS_LOCK_PIN D5 // TXLED

keyboards/1upkeyboards/sweet16/v1/info.json

@@ -3,6 +3,11 @@
         "pid": "0x0161",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D1", "D0", "D4", "C6"],
+        "rows": ["F4", "F5", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina"
 }

keyboards/25keys/aleth42/rev0/config.h

@@ -17,14 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D4, D5, D6, C2, C4, C5, C6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN C7
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 6

keyboards/25keys/aleth42/rev0/info.json

@@ -2,6 +2,11 @@
     "usb": {
         "device_version": "0.0.0"
     },
+    "matrix_pins": {
+        "cols": ["D0", "D1", "D2", "D3", "D4", "D5", "D6", "C2", "C4", "C5", "C6"],
+        "rows": ["B0", "B1", "B2", "B3"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "B6", "pin_b": "B7"},

keyboards/25keys/aleth42/rev1/config.h

@@ -17,14 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B4, B0, B2, B1 }
-#define MATRIX_COL_PINS { D5, D3, D2, D1, D0, D6, D4, F7, F0, F1, F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN B3
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 8

keyboards/25keys/aleth42/rev1/info.json

@@ -2,6 +2,11 @@
     "usb": {
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D5", "D3", "D2", "D1", "D0", "D6", "D4", "F7", "F0", "F1", "F4"],
+        "rows": ["B4", "B0", "B2", "B1"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "B5", "pin_b": "B6"},

keyboards/25keys/zinc/rev1/config.h

@@ -25,11 +25,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MASTER_RIGHT
 //#define EE_HANDS
 
-#define MATRIX_ROW_PINS { F6, F7, B1, B3 }
-#define MATRIX_COL_PINS { F4, D4, C6, D7, E6, B4 }
-
-#define DIODE_DIRECTION COL2ROW
-
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 

keyboards/25keys/zinc/rev1/info.json

@@ -1,5 +1,10 @@
 {
   "keyboard_name": "Zinc rev.1",
+  "matrix_pins": {
+    "cols": ["F4", "D4", "C6", "D7", "E6", "B4"],
+    "rows": ["F6", "F7", "B1", "B3"]
+  },
+  "diode_direction": "COL2ROW",
   "split": {
     "soft_serial_pin": "D2"
   }

keyboards/25keys/zinc/reva/config.h

@@ -25,11 +25,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MASTER_RIGHT
 //#define EE_HANDS
 
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3}
-
-#define DIODE_DIRECTION COL2ROW
-
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 

keyboards/25keys/zinc/reva/info.json

@@ -1,5 +1,10 @@
 {
   "keyboard_name": "Zinc rev.A",
+  "matrix_pins": {
+    "cols": ["F4", "F5", "F6", "F7", "B1", "B3"],
+    "rows": ["D4", "C6", "D7", "E6"]
+  },
+  "diode_direction": "COL2ROW",
   "split": {
     "soft_serial_pin": "D2"
   }

keyboards/2key2crawl/config.h

@@ -1,13 +1,5 @@
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C4, C5 }
-#define MATRIX_COL_PINS { B3, B4, B5, B6, B7, C7, B2 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/2key2crawl/info.json

@@ -8,6 +8,11 @@
         "pid": "0x6090",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["B3", "B4", "B5", "B6", "B7", "C7", "B2"],
+        "rows": ["C4", "C5"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "D0", "pin_b": "D1", "resolution": 1}

keyboards/30wer/config.h

@@ -1,9 +0,0 @@
-#pragma once
-
-
-/* pcb default pin-out */
-#define MATRIX_ROW_PINS { E6, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D1, D0, D4, C6, D7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW

keyboards/30wer/info.json

@@ -8,6 +8,11 @@
         "pid": "0x5678",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "D1", "D0", "D4", "C6", "D7"],
+        "rows": ["E6", "B4", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

keyboards/3keyecosystem/2key2/config.h

@@ -16,14 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { F6 }
-#define MATRIX_COL_PINS { F4, D7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* RGB matrix key backlighting */
 #define RGB_DI_PIN B2
 #define RGB_MATRIX_LED_COUNT 2

keyboards/3keyecosystem/2key2/info.json

@@ -8,6 +8,11 @@
         "pid": "0x3304",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "D7"],
+        "rows": ["F6"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "B7"
     },

keyboards/40percentclub/25/config.h

@@ -21,22 +21,6 @@
 //#define MASTER_RIGHT
 //#define EE_HANDS
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/40percentclub/25/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0F25",
         "device_version": "1.0.0"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "B1"],
+        "rows": ["D4", "C6", "D7", "E6", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D0"
     },

keyboards/40percentclub/4x4/config.h

@@ -2,23 +2,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B2, D1, D0, D4 }
-#define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/40percentclub/4x4/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0A0C",
         "device_version": "44.4.4"
     },
+    "matrix_pins": {
+        "cols": ["C6", "D7", "E6", "B4", "B5", "B6", "B7", "D6", "F7", "F6", "F5", "F4", "F1", "F0", "B3", "B1"],
+        "rows": ["B2", "D1", "D0", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "community_layouts": ["ortho_4x4", "ortho_4x12"],

keyboards/40percentclub/5x5/config.h

@@ -2,23 +2,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B2, D1, D0, D4, C6 }
-#define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/40percentclub/5x5/info.json

@@ -8,6 +8,11 @@
         "pid": "0x05B5",
         "device_version": "1.0.0"
     },
+    "matrix_pins": {
+        "cols": ["D7", "E6", "B4", "B5", "B6", "B7", "D6", "F7", "F6", "F5", "F4", "F1", "F0", "B3", "B1"],
+        "rows": ["B2", "D1", "D0", "D4", "C6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "community_layouts": ["ortho_5x5", "ortho_5x10", "ortho_5x15"],

keyboards/40percentclub/6lit/config.h

@@ -21,22 +21,6 @@
 //#define MASTER_RIGHT
 //#define EE_HANDS
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D7, E6 }
-#define MATRIX_COL_PINS { F6, F7, B1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/40percentclub/6lit/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0F61",
         "device_version": "1.0.0"
     },
+    "matrix_pins": {
+        "cols": ["F6", "F7", "B1"],
+        "rows": ["D7", "E6"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D0"
     },

keyboards/40percentclub/foobar/config.h

@@ -21,22 +21,6 @@
 //#define MASTER_RIGHT
 //#define EE_HANDS
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D7, E6, B4 }
-#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/40percentclub/foobar/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0F00",
         "device_version": "1.0.0"
     },
+    "matrix_pins": {
+        "cols": ["F6", "F7", "B1", "B3", "B2"],
+        "rows": ["D7", "E6", "B4"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D0"
     },

keyboards/40percentclub/gherkin/config.h

@@ -1,13 +1,5 @@
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/40percentclub/gherkin/info.json

@@ -8,6 +8,11 @@
     "pid": "0x6060",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["B4", "E6", "D7", "C6", "D4", "D0"],
+    "rows": ["F7", "B1", "B3", "B2", "B6"]
+  },
+  "diode_direction": "COL2ROW",
   "backlight": {
     "pin": "B5"
   },

keyboards/40percentclub/half_n_half/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/40percentclub/half_n_half/info.json

@@ -8,6 +8,11 @@
     "pid": "0x4A1F",
     "device_version": "1.0.0"
   },
+  "matrix_pins": {
+    "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"],
+    "rows": ["D4", "C6", "D7", "E6"]
+  },
+  "diode_direction": "COL2ROW",
   "split": {
     "soft_serial_pin": "D0"
   },

keyboards/40percentclub/i75/promicro/config.h

@@ -1,34 +0,0 @@
-/* Copyright 2018
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B4, E6, D7, C6, D4, D0, D1, D2, D3 }
-#define MATRIX_COL_PINS { B5, B6, B2, B3, B1, F7, F6, F5, F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW

keyboards/40percentclub/i75/promicro/info.json

@@ -1,4 +1,9 @@
 {
+    "matrix_pins": {
+        "cols": ["B5", "B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+        "rows": ["B4", "E6", "D7", "C6", "D4", "D0", "D1", "D2", "D3"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina"
 }

keyboards/40percentclub/i75/teensy2/config.h

@@ -1,34 +0,0 @@
-/* Copyright 2018
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D3, D2, D1, D0, B7, B3, B2, B1, B0 }
-#define MATRIX_COL_PINS { C6, C7, D6, D7, B5, B6, F7, F6, F5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW

keyboards/40percentclub/i75/teensy2/info.json

@@ -1,4 +1,9 @@
 {
+    "matrix_pins": {
+        "cols": ["C6", "C7", "D6", "D7", "B5", "B6", "F7", "F6", "F5"],
+        "rows": ["D3", "D2", "D1", "D0", "B7", "B3", "B2", "B1", "B0"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "halfkay"
 }

keyboards/40percentclub/luddite/config.h

@@ -1,12 +1,5 @@
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D3, D2, D1, D0, D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/40percentclub/luddite/info.json

@@ -8,6 +8,11 @@
     "pid": "0x4C55",
     "device_version": "10.0.1"
   },
+  "matrix_pins": {
+    "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+    "rows": ["D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6"]
+  },
+  "diode_direction": "COL2ROW",
   "backlight": {
     "pin": "B5",
     "levels": 4

keyboards/40percentclub/mf68/config.h

@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7, F6, F5, F4 }
-#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/40percentclub/mf68/info.json

@@ -8,6 +8,11 @@
     "pid": "0x4D68",
     "device_version": "1.0.1"
   },
+  "matrix_pins": {
+    "cols": ["D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6", "B4"],
+    "rows": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"]
+  },
+  "diode_direction": "COL2ROW",
   "backlight": {
     "pin": "B5",
     "breathing": true

keyboards/40percentclub/nori/config.h

@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D3, D2, D1, D0 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D4, C6, D7, E6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 // enable RGB underglow
 #define RGB_DI_PIN B4
 #define RGBLIGHT_EFFECT_BREATHING

keyboards/40percentclub/nori/info.json

@@ -8,6 +8,11 @@
       "pid": "0x0A0C",
       "device_version": "4.4.4"
     },
+    "matrix_pins": {
+      "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "D4", "C6", "D7", "E6"],
+      "rows": ["D3", "D2", "D1", "D0"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
       "pin": "B5"
     },
@@ -17,108 +22,108 @@
     "layouts": {
       "LAYOUT_ortho_4x4": {
           "layout": [
-            { "w": 1, "x": 0, "y": 0 },
-            { "w": 1, "x": 1, "y": 0 },
-            { "w": 1, "x": 2, "y": 0 },
-            { "w": 1, "x": 3, "y": 0 },
-            { "w": 1, "x": 0, "y": 1 },
-            { "w": 1, "x": 1, "y": 1 },
-            { "w": 1, "x": 2, "y": 1 },
-            { "w": 1, "x": 3, "y": 1 },
-            { "w": 1, "x": 0, "y": 2 },
-            { "w": 1, "x": 1, "y": 2 },
-            { "w": 1, "x": 2, "y": 2 },
-            { "w": 1, "x": 3, "y": 2 },
-            { "w": 1, "x": 0, "y": 3 },
-            { "w": 1, "x": 1, "y": 3 },
-            { "w": 1, "x": 2, "y": 3 },
-            { "w": 1, "x": 3, "y": 3 } ]
+            { "x": 0, "y": 0 },
+            { "x": 1, "y": 0 },
+            { "x": 2, "y": 0 },
+            { "x": 3, "y": 0 },
+            { "x": 0, "y": 1 },
+            { "x": 1, "y": 1 },
+            { "x": 2, "y": 1 },
+            { "x": 3, "y": 1 },
+            { "x": 0, "y": 2 },
+            { "x": 1, "y": 2 },
+            { "x": 2, "y": 2 },
+            { "x": 3, "y": 2 },
+            { "x": 0, "y": 3 },
+            { "x": 1, "y": 3 },
+            { "x": 2, "y": 3 },
+            { "x": 3, "y": 3 } ]
       },
       "LAYOUT_ortho_4x8": {
           "layout": [
-            { "w": 1, "x": 0, "y": 0 },
-            { "w": 1, "x": 1, "y": 0 },
-            { "w": 1, "x": 2, "y": 0 },
-            { "w": 1, "x": 3, "y": 0 },
-            { "w": 1, "x": 4, "y": 0 },
-            { "w": 1, "x": 5, "y": 0 },
-            { "w": 1, "x": 6, "y": 0 },
-            { "w": 1, "x": 7, "y": 0 },
-            { "w": 1, "x": 0, "y": 1 },
-            { "w": 1, "x": 1, "y": 1 },
-            { "w": 1, "x": 2, "y": 1 },
-            { "w": 1, "x": 3, "y": 1 },
-            { "w": 1, "x": 4, "y": 1 },
-            { "w": 1, "x": 5, "y": 1 },
-            { "w": 1, "x": 6, "y": 1 },
-            { "w": 1, "x": 7, "y": 1 },
-            { "w": 1, "x": 0, "y": 2 },
-            { "w": 1, "x": 1, "y": 2 },
-            { "w": 1, "x": 2, "y": 2 },
-            { "w": 1, "x": 3, "y": 2 },
-            { "w": 1, "x": 4, "y": 2 },
-            { "w": 1, "x": 5, "y": 2 },
-            { "w": 1, "x": 6, "y": 2 },
-            { "w": 1, "x": 7, "y": 2 },
-            { "w": 1, "x": 0, "y": 3 },
-            { "w": 1, "x": 1, "y": 3 },
-            { "w": 1, "x": 2, "y": 3 },
-            { "w": 1, "x": 3, "y": 3 },
-            { "w": 1, "x": 4, "y": 3 },
-            { "w": 1, "x": 5, "y": 3 },
-            { "w": 1, "x": 6, "y": 3 },
-            { "w": 1, "x": 7, "y": 3 } ]
+            { "x": 0, "y": 0 },
+            { "x": 1, "y": 0 },
+            { "x": 2, "y": 0 },
+            { "x": 3, "y": 0 },
+            { "x": 4, "y": 0 },
+            { "x": 5, "y": 0 },
+            { "x": 6, "y": 0 },
+            { "x": 7, "y": 0 },
+            { "x": 0, "y": 1 },
+            { "x": 1, "y": 1 },
+            { "x": 2, "y": 1 },
+            { "x": 3, "y": 1 },
+            { "x": 4, "y": 1 },
+            { "x": 5, "y": 1 },
+            { "x": 6, "y": 1 },
+            { "x": 7, "y": 1 },
+            { "x": 0, "y": 2 },
+            { "x": 1, "y": 2 },
+            { "x": 2, "y": 2 },
+            { "x": 3, "y": 2 },
+            { "x": 4, "y": 2 },
+            { "x": 5, "y": 2 },
+            { "x": 6, "y": 2 },
+            { "x": 7, "y": 2 },
+            { "x": 0, "y": 3 },
+            { "x": 1, "y": 3 },
+            { "x": 2, "y": 3 },
+            { "x": 3, "y": 3 },
+            { "x": 4, "y": 3 },
+            { "x": 5, "y": 3 },
+            { "x": 6, "y": 3 },
+            { "x": 7, "y": 3 } ]
       },
         "LAYOUT_ortho_4x12": {
             "layout": [
-              { "w": 1, "x": 0, "y": 0 },
-              { "w": 1, "x": 1, "y": 0 },
-              { "w": 1, "x": 2, "y": 0 },
-              { "w": 1, "x": 3, "y": 0 },
-              { "w": 1, "x": 4, "y": 0 },
-              { "w": 1, "x": 5, "y": 0 },
-              { "w": 1, "x": 6, "y": 0 },
-              { "w": 1, "x": 7, "y": 0 },
-              { "w": 1, "x": 8, "y": 0 },
-              { "w": 1, "x": 9, "y": 0 },
-              { "w": 1, "x": 10, "y": 0 },
-              { "w": 1, "x": 11, "y": 0 },
-              { "w": 1, "x": 0, "y": 1 },
-              { "w": 1, "x": 1, "y": 1 },
-              { "w": 1, "x": 2, "y": 1 },
-              { "w": 1, "x": 3, "y": 1 },
-              { "w": 1, "x": 4, "y": 1 },
-              { "w": 1, "x": 5, "y": 1 },
-              { "w": 1, "x": 6, "y": 1 },
-              { "w": 1, "x": 7, "y": 1 },
-              { "w": 1, "x": 8, "y": 1 },
-              { "w": 1, "x": 9, "y": 1 },
-              { "w": 1, "x": 10, "y": 1 },
-              { "w": 1, "x": 11, "y": 1 },
-              { "w": 1, "x": 0, "y": 2 },
-              { "w": 1, "x": 1, "y": 2 },
-              { "w": 1, "x": 2, "y": 2 },
-              { "w": 1, "x": 3, "y": 2 },
-              { "w": 1, "x": 4, "y": 2 },
-              { "w": 1, "x": 5, "y": 2 },
-              { "w": 1, "x": 6, "y": 2 },
-              { "w": 1, "x": 7, "y": 2 },
-              { "w": 1, "x": 8, "y": 2 },
-              { "w": 1, "x": 9, "y": 2 },
-              { "w": 1, "x": 10, "y": 2 },
-              { "w": 1, "x": 11, "y": 2 },
-              { "w": 1, "x": 0, "y": 3 },
-              { "w": 1, "x": 1, "y": 3 },
-              { "w": 1, "x": 2, "y": 3 },
-              { "w": 1, "x": 3, "y": 3 },
-              { "w": 1, "x": 4, "y": 3 },
-              { "w": 1, "x": 5, "y": 3 },
-              { "w": 1, "x": 6, "y": 3 },
-              { "w": 1, "x": 7, "y": 3 },
-              { "w": 1, "x": 8, "y": 3 },
-              { "w": 1, "x": 9, "y": 3 },
-              { "w": 1, "x": 10, "y": 3 },
-              { "w": 1, "x": 11, "y": 3 } ]
+              { "x": 0, "y": 0 },
+              { "x": 1, "y": 0 },
+              { "x": 2, "y": 0 },
+              { "x": 3, "y": 0 },
+              { "x": 4, "y": 0 },
+              { "x": 5, "y": 0 },
+              { "x": 6, "y": 0 },
+              { "x": 7, "y": 0 },
+              { "x": 8, "y": 0 },
+              { "x": 9, "y": 0 },
+              { "x": 10, "y": 0 },
+              { "x": 11, "y": 0 },
+              { "x": 0, "y": 1 },
+              { "x": 1, "y": 1 },
+              { "x": 2, "y": 1 },
+              { "x": 3, "y": 1 },
+              { "x": 4, "y": 1 },
+              { "x": 5, "y": 1 },
+              { "x": 6, "y": 1 },
+              { "x": 7, "y": 1 },
+              { "x": 8, "y": 1 },
+              { "x": 9, "y": 1 },
+              { "x": 10, "y": 1 },
+              { "x": 11, "y": 1 },
+              { "x": 0, "y": 2 },
+              { "x": 1, "y": 2 },
+              { "x": 2, "y": 2 },
+              { "x": 3, "y": 2 },
+              { "x": 4, "y": 2 },
+              { "x": 5, "y": 2 },
+              { "x": 6, "y": 2 },
+              { "x": 7, "y": 2 },
+              { "x": 8, "y": 2 },
+              { "x": 9, "y": 2 },
+              { "x": 10, "y": 2 },
+              { "x": 11, "y": 2 },
+              { "x": 0, "y": 3 },
+              { "x": 1, "y": 3 },
+              { "x": 2, "y": 3 },
+              { "x": 3, "y": 3 },
+              { "x": 4, "y": 3 },
+              { "x": 5, "y": 3 },
+              { "x": 6, "y": 3 },
+              { "x": 7, "y": 3 },
+              { "x": 8, "y": 3 },
+              { "x": 9, "y": 3 },
+              { "x": 10, "y": 3 },
+              { "x": 11, "y": 3 } ]
         }
     }
 }

keyboards/40percentclub/polyandry/promicro/config.h

@@ -1,28 +0,0 @@
-/* Copyright 2021
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/* key matrix pins 
- * Direct pins is not used because there is not a shared ground position
- * between all compatible microcontrollers.
-*/ 
-#define MATRIX_ROW_PINS { D7 }
-#define MATRIX_COL_PINS { D1, D0, D4, C6, E6, B4, F4, F5, F6, F7, B3, B2 }
-
-/* doesn't really matter lol */
-#define DIODE_DIRECTION COL2ROW

keyboards/40percentclub/polyandry/promicro/info.json

@@ -1,4 +1,9 @@
 {
+    "matrix_pins": {
+        "cols": ["D1", "D0", "D4", "C6", "E6", "B4", "F4", "F5", "F6", "F7", "B3", "B2"],
+        "rows": ["D7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina"
 }

keyboards/40percentclub/polyandry/teensy2/config.h

@@ -1,30 +0,0 @@
-/* Copyright 2021
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-/* key matrix pins */
-
-// Note from original contributor (ryjelsum):
-// Untested - don't have teensy2. if some keys do not function or are in wrong place,
-// please check the pin definitions. I may have screwed up. :) 
-
-#define MATRIX_ROW_PINS { D3 }
-#define MATRIX_COL_PINS { B7, D0, D1, D2, C6, C7, F6, F7, B6, B5, D7, D6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW

keyboards/40percentclub/polyandry/teensy2/info.json

@@ -1,4 +1,9 @@
 {
+    "matrix_pins": {
+        "cols": ["B7", "D0", "D1", "D2", "C6", "C7", "F6", "F7", "B6", "B5", "D7", "D6"],
+        "rows": ["D3"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "halfkay"
 }

keyboards/40percentclub/tomato/config.h

@@ -1,13 +1,5 @@
 #pragma once
 
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 

keyboards/40percentclub/tomato/info.json

@@ -8,6 +8,11 @@
     "pid": "0x546F",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["B4", "E6", "D7", "C6", "D4", "D0"],
+    "rows": ["F7", "B1", "B3", "B2", "B6"]
+  },
+  "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "caterina",
   "community_layouts": ["ortho_3x10"],

keyboards/45_ats/config.h

@@ -18,13 +18,6 @@
 
 #pragma once
 
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D3, D5, D7, D6 }
-#define MATRIX_COL_PINS { E6, B0, B1, B2, B3, B7, F6, F5, F4, C7, F7, C6, B6, D4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/45_ats/info.json

@@ -8,6 +8,11 @@
       "pid": "0x4511",
       "device_version": "0.0.1"
     },
+    "matrix_pins": {
+      "cols": ["E6", "B0", "B1", "B2", "B3", "B7", "F6", "F5", "F4", "C7", "F7", "C6", "B6", "D4"],
+      "rows": ["D3", "D5", "D7", "D6"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
       "rotary": [
         {"pin_a": "B4", "pin_b": "B5"}

keyboards/4by3/config.h

@@ -1,9 +0,0 @@
-#pragma once
-
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D1, D0, D4 }
-#define MATRIX_COL_PINS { C6, D7, E6, B4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW

keyboards/4by3/info.json

@@ -8,6 +8,11 @@
         "pid": "0x2019",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C6", "D7", "E6", "B4"],
+        "rows": ["D1", "D0", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina",
     "layouts": {

keyboards/4pplet/aekiso60/rev_a/config.h

@@ -1,13 +1,5 @@
 #pragma once
 
-
-// ROWS: Top to bottom, COLS: Left to right
-#define MATRIX_ROW_PINS {C2,D0,B0,C7,C5}
-#define MATRIX_COL_PINS {C4,C6,B7,B6,B5,B4,B3,B2,B1,D6,D5,D4,D2,D1}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D3
 #define RGBLED_NUM 12
 

keyboards/4pplet/aekiso60/rev_a/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C4", "C6", "B7", "B6", "B5", "B4", "B3", "B2", "B1", "D6", "D5", "D4", "D2", "D1"],
+        "rows": ["C2", "D0", "B0", "C7", "C5"]
+    },
+    "diode_direction": "COL2ROW",
     "qmk_lufa_bootloader": {
         "esc_input": "C2",
         "esc_output": "C4"

keyboards/4pplet/aekiso60/rev_b/config.h

@@ -16,15 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {B15,A9,B7,A1,A2}
-#define MATRIX_COL_PINS {A3,A4,F1,F0,C15,C14,C13,B9,B8,B6,B5,B4,B3,A15}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGBLED_NUM 12
 #define WS2812_EXTERNAL_PULLUP
 #define RGB_DI_PIN A8

keyboards/4pplet/aekiso60/rev_b/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0011",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["A3", "A4", "F1", "F0", "C15", "C14", "C13", "B9", "B8", "B6", "B5", "B4", "B3", "A15"],
+        "rows": ["B15", "A9", "B7", "A1", "A2"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "A10"
     },

keyboards/4pplet/bootleg/rev_a/config.h

@@ -1,25 +0,0 @@
-/*
-Copyright 2020 Stefan Sundin "4pplet" <4pplet@protonmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-
-// ROWS: Top to bottom, COLS: Left to right
-#define MATRIX_ROW_PINS {D0,C2,C4,D4,D2}
-#define MATRIX_COL_PINS {C5,C6,C7,B7,B6,B5,B4,B3,B2,B1,B0,D6,D5,D3,D1}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW

keyboards/4pplet/bootleg/rev_a/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0004",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C5", "C6", "C7", "B7", "B6", "B5", "B4", "B3", "B2", "B1", "B0", "D6", "D5", "D3", "D1"],
+        "rows": ["D0", "C2", "C4", "D4", "D2"]
+    },
+    "diode_direction": "COL2ROW",
     "qmk_lufa_bootloader": {
         "esc_input": "D0",
         "esc_output": "C4"
@@ -72,7 +77,7 @@
                 { "label": ">", "x": 10.25, "y": 3 },
                 { "label": "?", "x": 11.25, "y": 3 },
                 { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 },
-                { "label": "Fn", "x": 14, "y": 3, "w": 1 },
+                { "label": "Fn", "x": 14, "y": 3 },
                 { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 },
                 { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 },
                 { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 },

keyboards/4pplet/eagle_viper_rep/rev_a/config.h

@@ -16,10 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-#define MATRIX_COL_PINS { A0, B1, B0, A4, B5, B4, B3 }
-#define MATRIX_ROW_PINS { A2, A1, B8, A10, C15, A15, B7, B6, C14, C13}
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD2
 #define BACKLIGHT_PWM_CHANNEL   4
 #define BACKLIGHT_PAL_MODE      2

keyboards/4pplet/eagle_viper_rep/rev_a/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0007",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A0", "B1", "B0", "A4", "B5", "B4", "B3"],
+        "rows": ["A2", "A1", "B8", "A10", "C15", "A15", "B7", "B6", "C14", "C13"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A3",
         "levels": 10,
@@ -74,7 +79,7 @@
                 { "label": ">", "x": 10.25, "y": 3 },
                 { "label": "?", "x": 11.25, "y": 3 },
                 { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 },
-                { "label": "Fn", "x": 14, "y": 3, "w": 1 },
+                { "label": "Fn", "x": 14, "y": 3 },
                 { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 },
                 { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 },
                 { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 },

keyboards/4pplet/eagle_viper_rep/rev_b/config.h

@@ -16,10 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-#define MATRIX_COL_PINS { A0, A3, A4, A7, B5, B4, B3 }
-#define MATRIX_ROW_PINS { A2, A1, B8, A10, C15, A15, B7, B6, C14, C13}
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

keyboards/4pplet/eagle_viper_rep/rev_b/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0010",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["A0", "A3", "A4", "A7", "B5", "B4", "B3"],
+        "rows": ["A2", "A1", "B8", "A10", "C15", "A15", "B7", "B6", "C14", "C13"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

keyboards/4pplet/perk60_iso/rev_a/config.h

@@ -16,10 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-#define MATRIX_COL_PINS { A1, B12, B14, A2, A0, A3, A4}
-#define MATRIX_ROW_PINS { C14, C13, B5, B4, B8, A15, B3, B9, A5, A7}
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/4pplet/perk60_iso/rev_a/info.json

@@ -8,6 +8,11 @@
         "pid": "0x0009",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A1", "B12", "B14", "A2", "A0", "A3", "A4"],
+        "rows": ["C14", "C13", "B5", "B4", "B8", "A15", "B3", "B9", "A5", "A7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F411",
     "bootloader": "stm32-dfu",
     "community_layouts": ["60_iso"],

keyboards/4pplet/steezy60/rev_a/config.h

@@ -1,13 +1,5 @@
 #pragma once
 
-
-// ROWS: Top to bottom, COLS: Left to right
-#define MATRIX_ROW_PINS {C2,D0,B0,C7,C5}
-#define MATRIX_COL_PINS {C4,C6,B7,B6,B5,B4,B3,B2,B1,D6,D5,D4,D2,D1}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D3
 #define RGBLED_NUM 12